English dropdown-ico

Manual Dixon ZTR 34, ZTR 44, ZTR 34

52 pages 0.73 mb
Download

Go to site of 52

Summary
  • Dixon ZTR 34, ZTR 44, ZTR 34 - page 1

    BLACK BEAR ™ ZTR ® Safety Instructions and Operator’s Manual Models ZTR ® 34/968999564 ZTR ® 44/968999565 ZTR ® 34/968999566 BLACK BEAR ™ ZTR ® ...

  • Dixon ZTR 34, ZTR 44, ZTR 34 - page 2

    2 IMPORTANT - READ CAREFULLY The Dixon® ZTR® mower is both easy and fun to operate. However, any power mower must be operated properly to be safe. It is not a toy or a recreational vehicle. Before you start to use the mower, read this Operator’s Manual carefully. It contains valuable information that is necessary for the safe operation of the m ...

  • Dixon ZTR 34, ZTR 44, ZTR 34 - page 3

    3 TABLE OF CONTENTS BLACK BEAR™ Part Number 539 118101R1 SAFETY AND WARNINGS ............................................................ 4-15 GENERAL OPERATION ................................................... 6-7 MOWING ON A SLOPE .................................................... 8-9 FIRE HAZARDS ........................................... ...

  • Dixon ZTR 34, ZTR 44, ZTR 34 - page 4

    SAFETY 4 Blade Contact Tip Over Run Over Back Over RIDING LAWN MOWERS, IF IMPROPERLY OPERATED, CAN CAUSE SERIOUS INJURY OR DEATH Pictured below are the most common causes of injury to the operator or bystander. Please read and understand this manual to prevent injuries. ...

  • Dixon ZTR 34, ZTR 44, ZTR 34 - page 5

    SAFETY 5 Safety Alert Symbol DANGER (highlighted in red) indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING (highlighted in orange) indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION (highlighted in yellow) indicates a po ...

  • Dixon ZTR 34, ZTR 44, ZTR 34 - page 6

    WARNING 6 GENERAL OPERATION Read, understand, and follow all instructions in this manual and on the mower before starting. Only allow responsible adults, who are familiar with the instructions, to operate the mower. Clear the area of objects such as rocks, toys, wire, etc., which could be picked up and thrown by the blade. Be sure the area is clear ...

  • Dixon ZTR 34, ZTR 44, ZTR 34 - page 7

    WARNING 7 WARNING ! Failure to observe the following instructions could result in serious injury or death. Turn off blades when not mowing. Injury could occur from contact with moving parts. Under no circumstances should you place hands or feet under the mower deck or in the chute while blades or impeller are still running. To avoid personal injury ...

  • Dixon ZTR 34, ZTR 44, ZTR 34 - page 8

    WARNING 8 WARNING ! Failure to observe the following instructions could result in serious injury or death. SLOPE OPERATION Slopes are a major factor related to loss-of-control and tip-over accidents, which can result in severe injury or death. All slopes require extra caution. If you feel unsure on any slope, do not mow it! DO Mow across the slope ...

  • Dixon ZTR 34, ZTR 44, ZTR 34 - page 9

    WARNING 9 SLOPE OPERATION (continued) DO NOT Do not turn on slopes unless necessary, and then, turn slowly and gradually downhill, if possible. Rapid uphill turns may cause tip-over. Do not mow near drop-offs, ditches, or embankments. Unstable ground may cause loss of control. Do not mow on wet grass. Reduced traction could cause sliding. Do not tr ...

  • Dixon ZTR 34, ZTR 44, ZTR 34 - page 10

    WARNING 10 FIRE HAZARDS Use extra care when handling gasoline and other fuels. They are flammable and vapors are explosive. Store all fuel in approved containers specifically designed for that purpose. Allow engine to cool before refueling. Never remove fuel cap or add fuel with engine running. Do not smoke while refueling or operating the mower. T ...

  • Dixon ZTR 34, ZTR 44, ZTR 34 - page 11

    WARNING 11 FIRE HAZARDS (continued) To prevent fire or explosion, keep sparks and open flames away from battery. Keep electrical connections clean and tight. Inspect them often. Loose connections and corrosion increase fire risk. Before disconnecting the negative ground cable, make sure all switches are off. This decreases the chance of sparking an ...

  • Dixon ZTR 34, ZTR 44, ZTR 34 - page 12

    WARNING 12 CHILDREN, BYSTANDERS AND PETS Tragic accidents can occur if the operator is not alert to the presence of children, bystanders and pets. Children are attracted to lawn mowers and the mowing activity. NEVER assume children, bystanders and pets will stay where they were last seen. Be alert to avoid accidents. Keep bystanders and pets out of ...

  • Dixon ZTR 34, ZTR 44, ZTR 34 - page 13

    WARNING 13 SERVICE Never run a mower inside a closed area or without proper ventilation. Keep nuts and bolts tight, especially blade attachment bolts, and keep equipment in good condition. Never tamper with safety devices. Check their proper operation regularly. Stop and inspect the equipment if you strike an object. Repair, if necessary, before re ...

  • Dixon ZTR 34, ZTR 44, ZTR 34 - page 14

    14 DIXON® ZTR® PRO SERIES COMMERCIAL/RESIDENTIAL W ARRANTY POLICY Black Bear™, Kodiak™, Grizzly™ & SilverTip™ Mowers DIXON® WARRANTS ITS ZTR® MOWERS AGAINST DEFECTS IN MA TERIAL AND WORKMANSHIP FOR THE PERIODS SET FORTH BELOW . THE SOLE REMEDY UNDER THIS WARRANTY IS REPLACEMENT OR REP AIR OF P ARTS INCLUDING LABOR COSTS. THIS WARRAN ...

  • Dixon ZTR 34, ZTR 44, ZTR 34 - page 15

    SPECIFICATIONS 15 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Additional information may be provided elsewhere in this manual. BLACK BEAR™ 34 Model 968999564 11 gauge rectangular tube Designed for operator comfort by use of high-density closed cell foam padded back and arm rests, upholstered with Cordura TM water-repellent fabric. Seat is adj ...

  • Dixon ZTR 34, ZTR 44, ZTR 34 - page 16

    SPECIFICATIONS 16 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Additional information may be provided elsewhere in this manual. BLACK BEAR™ 34 Model 968999566 11 gauge rectangular tube Designed for operator comfort by use of high-density closed cell foam padded back and arm rests, upholstered with Cordura TM water-repellent fabric. Seat is adj ...

  • Dixon ZTR 34, ZTR 44, ZTR 34 - page 17

    SPECIFICATIONS 17 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Additional information may be provided elsewhere in this manual. BLACK BEAR™ 44 Model 968999565 11 gauge rectangular tube Designed for operator comfort by use of high-density closed cell foam padded back and arm rests, upholstered with Cordura TM water-repellent fabric. Seat is adj ...

  • Dixon ZTR 34, ZTR 44, ZTR 34 - page 18

    18 SEAT ADJUSTMENT INSTRUCTIONS 1. Grasp seat slide adjuster and move it into adjustment position. 2. Slide seat forward or backward. 3. Release seat slide adjuster. — Fig. 1 — Seat Slide Adjuster ...

  • Dixon ZTR 34, ZTR 44, ZTR 34 - page 19

    CONTROLS 19 CONTROL LEVERS For access to the seat, move control levers to neutral position and swing them outward. TO GO FORWARD • From neutral position, gently push control levers forward. • To increase speed, move levers further forward. TO GO BACKWARDS • From neutral position, gently pull control levers toward you. TURNING • Turning is c ...

  • Dixon ZTR 34, ZTR 44, ZTR 34 - page 20

    CONTROLS 20 — Fig. 3 — PARK BRAKE The park brake is designed to hold the mower from moving and is not intended for use in stopping the mower while it is in motion. The engine will stop if the park brake is engaged while the control levers are in the drive position. TO SET PARK BRAKE The hand-operated park brake is located on the operator’s le ...

  • Dixon ZTR 34, ZTR 44, ZTR 34 - page 21

    CONTROLS 21 MOWER DECK CUT HEIGHT LIFT LEVER • Located to the right and front of the operator. • Controls the cutting height. • 17 positions of adjustment • Depress trigger and move lever forward to lower deck. • Pull lever back to raise deck. • Set desired cut height with pin. • Use foot pedal to assist with raising and lowering deck ...

  • Dixon ZTR 34, ZTR 44, ZTR 34 - page 22

    CONTROLS 22 BLADE DRIVE • Located on the control panel, on operator’s right. • To engage the mower blade, pull up on the switch. • To disengage mower blade, push down. CIRCUIT BREAKER • Located on the control panel to the operator’s right. • Protection of the electrical system is by (1) 15 amp circuit breaker. • If circuit breaker t ...

  • Dixon ZTR 34, ZTR 44, ZTR 34 - page 23

    OPERATION INSTRUCTIONS 23 The safe and successful operation of the SpeedZTR will depend on the operator having the correct knowledge of all controls used on the mower and making good judgements about the terrain to be mowed. NEVER allow anyone who does not have complete knowledge of all controls and their functions to operate the mower. NEVER dismo ...

  • Dixon ZTR 34, ZTR 44, ZTR 34 - page 24

    OPERATION INSTRUCTIONS 24 STARTING INSTRUCTIONS 1. Park brake must be on, control levers in outward position and blade drive disengaged. 2. Position throttle to choke position if engine is cold. Full throttle if warm. NOTE: Engine may require partial choke setting to start even if the engine has been operated for a period of time. 3. Insert ignitio ...

  • Dixon ZTR 34, ZTR 44, ZTR 34 - page 25

    OPERATION INSTRUCTIONS 25 TESTING OF SAFETY INTERLOCK SYSTEMS The following tests should be performed at the start of each mowing day. PARK BRAKE SWITCH TEST 1. Swing control levers to outward position. 2. Disengage blade drive. 3. Put park brake in OFF position. 4. Turn ignition switch to START. Engine should not turn over or attempt to start. CON ...

  • Dixon ZTR 34, ZTR 44, ZTR 34 - page 26

    OPERATION INSTRUCTIONS 26 TESTING OF SAFETY INTERLOCK SYSTEMS The following tests should be performed at the start of each mowing day. BLADE DRIVE SWITCH TEST 1. Put park brake in ON position. 2. Swing control levers to outward position. 3. Engage blade drive. 4. Turn ignition switch to START. Engine should not turn over or attempt to start. SEAT S ...

  • Dixon ZTR 34, ZTR 44, ZTR 34 - page 27

    OPERATION INSTRUCTIONS 27 MOWING WITH A MULCHING ATTACHMENT Mulching or recycling the grass clippings requires a totally different mowing approach than would be normal when side discharging or bagging the grass. There may be instances or conditions where it is not possible to hide all the recycled or mulched clippings. In order to achieve the best ...

  • Dixon ZTR 34, ZTR 44, ZTR 34 - page 28

    OPERATION INSTRUCTIONS 28 MOWING WITH A MULCHING ATTACHMENT (continued) 7. Keep the underside of the mower deck clean. Remove all grass and dirt buildup from the underside of the pan, the baffles and deflectors after each use. Never, under any circumstances, place your hands or feet under the mower deck or in the chute while blades or impeller are ...

  • Dixon ZTR 34, ZTR 44, ZTR 34 - page 29

    OPERATION INSTRUCTIONS 29 MOWING WITH A GRASS CATCHER ATTACHMENT In order to achieve optimum performance when mowing with a grass catching attachment, please read and follow the tips listed below. 1. Read and follow the installation instructions that are included with your grass catcher. 2. Set engine speed control to the wide open or full setting. ...

  • Dixon ZTR 34, ZTR 44, ZTR 34 - page 30

    OPERATION INSTRUCTIONS 30 MOWING WITH A GRASS CATCHER ATTACHMENT (continued) WARNING ! Failure to observe the following instructions could result in serious injury or death. 7. Maintain sharp blades throughout the cutting season. Some grass catching attachments require a “high-lift” blade. See your dealer for advice on the type of blade(s) need ...

  • Dixon ZTR 34, ZTR 44, ZTR 34 - page 31

    OPERATION INSTRUCTIONS 31 SIDE DISCHARGE OF THE CLIPPINGS In order to achieve optimum performance when side discharging the grass clippings, please read and follow the tips listed below. Additional information can be found in the Troubleshooting guide on Page 47-48. 1. Set engine speed control to the wide open or full setting. 2. Do not attempt to ...

  • Dixon ZTR 34, ZTR 44, ZTR 34 - page 32

    OPERATION INSTRUCTIONS 32 GRASS HEIGHT AND CUTTING SUGGESTIONS Do not attempt to cut grass when it is wet. If the grass is tall, place the mower deck cut height lever in the top or second notch. “Initially” overlap cutting swaths instead of a full swath with each pass. Some applications may require a second cutting. Keep the underside of the mo ...

  • Dixon ZTR 34, ZTR 44, ZTR 34 - page 33

    OPERATION INSTRUCTIONS 33 TOWING TRAILERS AND OTHER ATTACHMENTS Towing a trailer or other attachment that is too heavy could damage the drive or cause the mower to become unstable. Limit loads to 250 pounds (113 kg) or less with this mower. To Free Wheel Machine (Unlock Transmission) Always turn off engine before engaging or disengaging the hydro r ...

  • Dixon ZTR 34, ZTR 44, ZTR 34 - page 34

    CARE AND MAINTENANCE 34 Before performing any maintenance, turn off engine, allow to cool and remove key. Use extreme care when working on machinery. Do not wear watch or jewelry. Do not wear loose fitting clothes, and observe all common safety practices with tools. MAINTENANCE SCHEDULE •Adjust traction drive idler ............................... ...

  • Dixon ZTR 34, ZTR 44, ZTR 34 - page 35

    CARE AND MAINTENANCE 35 — Fig. 9 — Spindle Assembly Mower Blade Blade Bolt P/N 539 117839 Blade Washer P/N 539 117838 CUTTER BLADE MAINTENANCE Check sharpness of mower blades after every 10 hours of operation. Observe proper blade position prior to removal. 1. Safely raise front of mower. 2. Hold or block blade from turning. 3. Loosen blade bol ...

  • Dixon ZTR 34, ZTR 44, ZTR 34 - page 36

    CARE AND MAINTENANCE 36 ENGINE For complete maintenance and operating information of the engine, please refer to the maintenance instructions furnished by the engine manufacturer included in your Zero Turn Radius mower information packet. BATTERY This is a maintenance-free battery and the fluid level cannot be checked. Charge battery if required. O ...

  • Dixon ZTR 34, ZTR 44, ZTR 34 - page 37

    CARE AND MAINTENANCE 37 BELTS Check belts every 50 hours. Replace any belts showing signs of wear or cracking. BELT TENSION Engine to Mower Deck Belt: 34" P/N 539 117811 44" P/N 539 118156 Manual adjustment. Turn nut on deck eyebolt to adjust belt tension. NOTE: Belt deflection or movement should be approximately ¼"(6mm) when measur ...

  • Dixon ZTR 34, ZTR 44, ZTR 34 - page 38

    CARE AND MAINTENANCE 38 TIRES Correct tire pressure is essential for efficient operation of the mower. Check tire pressure periodically. Inflate tires to the pressure listed below. Front tires 13 x 5 - 6 16-21 PSI (110-145 kPa) Rear tires 23 x 8.5 - 12 8-14 PSI (55-97 kPa) Lug nuts or lug bolts should be checked regularly for tightness. LUBRICATION ...

  • Dixon ZTR 34, ZTR 44, ZTR 34 - page 39

    CARE AND MAINTENANCE 39 Hex Head Valve Stem CHANGING THE ENGINE OIL 1. The “Dapco” oil drain valve is located on either side of the engine crankcase (depending on the type of engine installed on your ZTR). 2. Place a suitable container under the drain valve hose. 3. To drain, turn hex head valve stem counter-clockwise with a 10mm wrench or sock ...

  • Dixon ZTR 34, ZTR 44, ZTR 34 - page 40

    CARE AND MAINTENANCE 40 HYDROSTATIC TRANSMISSION OIL AND FILTER SERVICE Dirt or water in oil can ruin the hydrostatic transmissions. SERVICE INTERVALS • Initial filter service - 100 hours • Every 500 hours or once a year thereafter. RECOMMENDED Oil All temperatures - 15W-50 Synthetic Hydrostatic Oil ~or if not available~ Normal Operating Temper ...

  • Dixon ZTR 34, ZTR 44, ZTR 34 - page 41

    CARE AND MAINTENANCE 41 HYDROSTAT OIL MAINTENANCE PROCEDURE Check the oil level in hydrostatic transmission oil reservoir after every 25 hours of usage. Clean the oil reservoir cap and the area around it prior to removal. Check the oil level. Oil should be approximately ¼” below top of oil tank baffle. Replenish as needed with 15W-50 Synthetic H ...

  • Dixon ZTR 34, ZTR 44, ZTR 34 - page 42

    CARE AND MAINTENANCE 42 NEUTRAL ADJUSTMENT 1. Lift seat. 2. Block up the unit so that the drive wheels are off the ground. Remove rear tires. 3. Loosen jam nuts on both ends of the control rod coupler. NOTE: The rear jam nuts are left hand threads. 4. With steering control arms in the outward (neutral) position, start the engine and run at fast idl ...

  • Dixon ZTR 34, ZTR 44, ZTR 34 - page 43

    CARE AND MAINTENANCE 43 MOWER DECK LEVELING PROCEDURE There are four(4) slots that will control the attitude or pitch of the mower deck. The deck should be level or pitched slightly higher in rear. 1. Place the mower on a smooth level surface with front casters positioned towards deck. Check tire pressures to insure the mower has a correct stance. ...

  • Dixon ZTR 34, ZTR 44, ZTR 34 - page 44

    CARE AND MAINTENANCE 44 MOWER DECK LEVELING PROCEDURE (continued) 4. Turn both outer blades to align with the deck in front-to- rear manner. Reposition rear mounting bolts up or down until rear of mower deck is positioned level to 1 / 8 " higher in the rear than the side-to-side measurement. 5. Confirm measurements once again. Blade tips shoul ...

  • Dixon ZTR 34, ZTR 44, ZTR 34 - page 45

    CARE AND MAINTENANCE 45 MOWER DECK REMOVAL 1. Remove mower deck drive belt from clutch. To relieve belt tension, loosen nut on tensioner eyebolt. 2. Move deck into lowest cut position and support deck with blocks. 3. Remove nut from each of the four hanger bolts (suspended from chains). Remove hanger bolts from deck slots. 4. Remove hardware attach ...

  • Dixon ZTR 34, ZTR 44, ZTR 34 - page 46

    CARE AND MAINTENANCE 46 ELECTRICAL SYSTEMS Keep all connections clean and tight. CLEANING THE MOWER Wash mower periodically. Clean above and below deck. High pressure washing and alkaline based soaps can cause damage to bearings and other parts of the mower. After washing your mower, start the engine and engage the mower deck for a few minutes to d ...

  • Dixon ZTR 34, ZTR 44, ZTR 34 - page 47

    47 TROUBLESHOOTING 1. ENGINE WON’T TURN OVER Mower blades engaged - - - - - - - - - - - - - - - - - - - - disengage blades Park brake not on - - - - - - - - - - - - - - - - - - - - - - - - engage park brake Dead battery - - - - - - - - - - - - - - - - - - - - - - - - - - - charge or replace Solenoid - - - - - - - - - - - - - - - - - - - - - - - - ...

  • Dixon ZTR 34, ZTR 44, ZTR 34 - page 48

    48 TROUBLESHOOTING 6. ENGINE RUNS BUT MOWER WON’T MOVE FORWARD Drive belt broken or slipping - - - - - - - - - - - - - - - - replace drive belt Transmission oil low - - - - - - - - - - - - - - - - - - - - - - - - - - - - - add oil Damaged transmission - - - - - - - - - - - - - - - - - - - - - - consult dealer Transmission bypass may be engaged - ...

  • Dixon ZTR 34, ZTR 44, ZTR 34 - page 49

    49 STANDARD SERVICE PARTS LIST BLADES AND BELTS 34" Deck Blade * Hi-Lift Fusion P/N 539 118039 Standard Lift Fusion P/N 539 117766 Gator Fusion P/N 539 117767 Transmission Belt P/N 539 118012 Deck Belt P/N 539 117811 44" Deck Blade * Hi Lift Fusion P/N 539 117843 Standard Lift Fusion P/N 539 117842 Gator Fusion P/N 539 117841 Transmission ...

  • Dixon ZTR 34, ZTR 44, ZTR 34 - page 50

    Dixon ~401 North Commerce Street~Beatrice, NE~68310 ~402-223-1000~Fax 402-223-1053 OWNER’S INFORMATION Date of Purchase ________________________________ Mower Model Number _____________________________ Mower Serial Number _____________________________ Purchased From ________________________________ ________________________________ _______________ ...

  • Dixon ZTR 34, ZTR 44, ZTR 34 - page 51

    ...

  • Dixon ZTR 34, ZTR 44, ZTR 34 - page 52

    Dixon and ZTR® are registered trademarks of Dixon DIXON 401 Commerce Street Beatrice, NE 68310 SpeedZTR Black Bear Part No. 539-118101R1 WARNING ! The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. ...

Manufacturer Dixon Category Lawn Mower

Documents that we receive from a manufacturer of a Dixon ZTR 34, ZTR 44, ZTR 34 can be divided into several groups. They are, among others:
- Dixon technical drawings
- ZTR 34, ZTR 44, ZTR 34 manuals
- Dixon product data sheets
- information booklets
- or energy labels Dixon ZTR 34, ZTR 44, ZTR 34
All of them are important, but the most important information from the point of view of use of the device are in the user manual Dixon ZTR 34, ZTR 44, ZTR 34.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Dixon ZTR 34, ZTR 44, ZTR 34, service manual, brief instructions and user manuals Dixon ZTR 34, ZTR 44, ZTR 34. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Dixon ZTR 34, ZTR 44, ZTR 34.

Similar manuals

A complete manual for the device Dixon ZTR 34, ZTR 44, ZTR 34, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Dixon ZTR 34, ZTR 44, ZTR 34 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Dixon ZTR 34, ZTR 44, ZTR 34.

A complete Dixon manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Dixon ZTR 34, ZTR 44, ZTR 34 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Dixon ZTR 34, ZTR 44, ZTR 34, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Dixon ZTR 34, ZTR 44, ZTR 34, that we can find in the current document
3. Tips how to use the basic functions of the device Dixon ZTR 34, ZTR 44, ZTR 34 - which should help us in our first steps of using Dixon ZTR 34, ZTR 44, ZTR 34
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Dixon ZTR 34, ZTR 44, ZTR 34
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Dixon ZTR 34, ZTR 44, ZTR 34 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Dixon ZTR 34, ZTR 44, ZTR 34?

Use the form below

If you did not solve your problem by using a manual Dixon ZTR 34, ZTR 44, ZTR 34, ask a question using the form below. If a user had a similar problem with Dixon ZTR 34, ZTR 44, ZTR 34 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)