English dropdown-ico

Manual HP (Hewlett-Packard) 3C900

40 pages 0.09 mb
Download

Go to site of 40

Summary
  • HP (Hewlett-Packard) 3C900 - page 1

    Etherlink XL PCI Network Interface Card 3C900 Installation Guid e ...

  • HP (Hewlett-Packard) 3C900 - page 2

    Notic e The information contained in this document is subject to change without notice . Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for inc ...

  • HP (Hewlett-Packard) 3C900 - page 3

    1 Connecting to a Netware 3.12 Server Windows for Workgroups 1 Connecting to a Netware 3.12 Serve r Windows for Workgroup s Requirement s • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed . • 3COM Etherlink 3C900 Ethernet card and drivers disk ver 2.1. DOS ODI - File Name : 3C90X.COM Size: 59K B Date: 12/18/9 6 • DOS and MS-Wi ...

  • HP (Hewlett-Packard) 3C900 - page 4

    1 Connecting to a Netware 3.12 Serve r Windows for Workgroup s 7 Execute INSTALL.EXE and set lines 1-5 as listed below ; • C:NWCLIEN T • YE S • YES C:WINDOW S • NO • 3COM Etherlink XL/Fast Etherlink XL Family . 8 Highlight option 6 to continue with installation. 9 When prompted, insert the corresponding disks to complete file transfer a ...

  • HP (Hewlett-Packard) 3C900 - page 5

    1 Connecting to a Netware 3.12 Server Windows 95 SR2 Windows 95 SR 2 Requirement s • HP Vectra with Windows 95 SR2 installed . • 3COM Etherlink 3C900 Ethernet card and drivers disk ver 2.1 . • File Name: OEMSETUP.INF Size: 41K B Date: 3/14/97 • Windows 95 SR2 media. (If you have an HP preloaded HDD, the media is located at C:MastersWin95 ...

  • HP (Hewlett-Packard) 3C900 - page 6

    1 Connecting to a Netware 3.12 Serve r Windows 95 SR 2 10 Set the path to “A:” and click on “OK.” (If you have a Hewlett-Packard pre-loaded HDD, set the path statement to “C:LANDRV3C900Disk1” ) 11 “3Com Etherlink XL TPO 10Mb Ethernet Adapter” should now be listed. Click on “Finish. ” 12 When prompted, insert the 3C900 drive ...

  • HP (Hewlett-Packard) 3C900 - page 7

    2 Connecting to a Netware 4.11 Server Windows for Workgroups 2 Connecting to a Netware 4.11 Serve r Windows for Workgroup s Requirement s • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed . • 3COM Etherlink 3C900 Ethernet card and drivers disk ver 2.1. DOS ODI - File Name: 3C90X.COM Size: 59KB Date: 12/18/9 6 • DOS and MS-Wind ...

  • HP (Hewlett-Packard) 3C900 - page 8

    2 Connecting to a Netware 4.11 Serve r Windows for Workgroup s 7 Execute INSTALL.EXE and set lines 1-5 as listed below ; • C:NWCLIEN T • YE S • YES C:WINDOW S • NO • 3COM Etherlink XL/Fast Etherlink XL Family . 8 Highlight option 6 to continue with installation. 9 When prompted, insert the corresponding disks to complete file transfer a ...

  • HP (Hewlett-Packard) 3C900 - page 9

    2 Connecting to a Netware 4.11 Server Windows 95 SR2 Windows 95 SR 2 Requirement s • HP Vectra with Windows 95 SR2 installed . • 3COM Etherlink 3C900 Ethernet card and drivers disk ver 2.1 . • File Name: OEMSETUP.INF Size: 41K B Date: 3/14/97 • Windows 95 SR2 media. (If you have an HP preloaded HDD, the media is located at C:MastersWin95 ...

  • HP (Hewlett-Packard) 3C900 - page 10

    2 Connecting to a Netware 4.11 Serve r Windows 95 SR 2 10 Set the path to “A:” and click on “OK.” (If you have a Hewlett-Packard pre-loaded HDD, set the path statement to “C:LANDRV3C900Disk1” ) 11 “3Com Etherlink XL TPO 10Mb Ethernet Adapter” should now be listed. Click on “Finish. ” 12 When prompted, insert the 3C900 drive ...

  • HP (Hewlett-Packard) 3C900 - page 11

    3 Connecting to a Windows NT Server 3.51 Windows for Workgroups Version 3.11 3 Connecting to a Windows NT Server 3.5 1 Windows for Workgroups Version 3.1 1 Requirement s • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed . • 3COM Etherlink 3C900 Ethernet card and drivers disk ver. 2.1. DOS ODI Driver Name: EL90X.DOS Size: 46KB Da ...

  • HP (Hewlett-Packard) 3C900 - page 12

    3 Connecting to a Windows NT Server 3.5 1 Windows for Workgroups Version 3.1 1 9 Click on the “Install Microsoft Windows Network:” Option , and click “OK. ” 10 Click on the “Drivers” button from the “Network Setup” dialog box, and click on “Add Adapter”. 11 Click “OK” to accept the default choice of “Unlisted or Updated Ne ...

  • HP (Hewlett-Packard) 3C900 - page 13

    3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 Windows 95 SR 2 Requirement s • HP Vectra with Windows 95 SR2 . • 3COM Etherlink 3C900 Ethernet card and drivers disk Ver. 2.1. Driver Name: El90X.DOS Size: 45KB Date: 3/21/9 7 • Microsoft Windows NT Server 3.51 machine that supports Net BEUI, TCP/ IP, NWLink IPX/SPX, and NWLink NetBIOS ...

  • HP (Hewlett-Packard) 3C900 - page 14

    3 Connecting to a Windows NT Server 3.5 1 Windows 95 SR 2 11 Click on “Other Locations” in the “Update Device Driver Location” dialog box, and set path to “A:” then click “OK.” (If you have an HP pre-loaded HDD, set the path statement to “C:LANDRV3C900DISK1”) . 12 “3Com EtherLink XL TPO 10Mb Ethernet Adapter” should now ...

  • HP (Hewlett-Packard) 3C900 - page 15

    3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 ...

  • HP (Hewlett-Packard) 3C900 - page 16

    3 Connecting to a Windows NT Server 3.5 1 Windows 95 SR 2 ...

  • HP (Hewlett-Packard) 3C900 - page 17

    3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 Windows NT Workstation Version 3.5 1 Requirement s • HP Vectra with Microsoft Windows NT Workstation 3.51 installed . • 3COM Etherlink 3C900 ethernet card and drivers disk ver. 2.1. Driver Name: OMESETUP.INF Size: 41KB Date: 3/14/97 • Microsoft Windows NT Workstation ...

  • HP (Hewlett-Packard) 3C900 - page 18

    3 Connecting to a Windows NT Server 3.5 1 Windows NT Workstation Version 3.5 1 10 Double click on the “Network” icon in the “Control Panel” program group . 11 Click on “YES” in the “Network Settings” dialog box, and NT Networking will be installed on your computer . 12 Insert the Windows NT Workstaion CD. 13 In the “Windows NT Set ...

  • HP (Hewlett-Packard) 3C900 - page 19

    3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 26 At the “Domain/Workgroup Settings” dialog box, click on “OK” to accept the default “Workgroup” as your workgroup name. (If you do not have the required information, contact your network administrator ) 27 To complete the installation, remove the floppy disk, ...

  • HP (Hewlett-Packard) 3C900 - page 20

    3 Connecting to a Windows NT Server 3.5 1 Windows NT Workstation Version 3.5 1 ...

  • HP (Hewlett-Packard) 3C900 - page 21

    3 Connecting to a Windows NT Server 3.51 Windows NT Workstation 4.0 Windows NT Workstation 4. 0 Requirement s • HP Vectra with Windows NT Workstation 4.0 Service Pack 3 . • 3COM Etherlink 3C900 Ethernet card and drivers disk ver 2.1 . • Driver Name: 3C90X.INF Size: 71K B Date: 11/25/96 Microsoft Windows NT Workstation 4.0 and Service Pack Med ...

  • HP (Hewlett-Packard) 3C900 - page 22

    3 Connecting to a Windows NT Server 3.5 1 Windows NT Workstation 4. 0 9 Log onto the machine with Administrator privileges. (If you do not have the required information, contact your network administrator ) 10 Click on “Start” and move to “Settings”, open the “Control Panel” and double-click on “Network. ” 11 Click on “Yes” and ...

  • HP (Hewlett-Packard) 3C900 - page 23

    3 Connecting to a Windows NT Server 3.51 Windows NT Workstation 4.0 26 If you know what your TCP/IP settings are, click “NO”, and enter the IP settings when prompted. If You DO NOT know what your TCP/IP settings will be click on “YES” to Obtain an IP address automatically, and continue. (If you do not have the required information, contact ...

  • HP (Hewlett-Packard) 3C900 - page 24

    3 Connecting to a Windows NT Server 3.5 1 Windows NT Workstation 4. 0 ...

  • HP (Hewlett-Packard) 3C900 - page 25

    4 Connecting to a Windows NT Server 4.0 Windows for Workgroups Version 3.11 4 Connecting to a Windows NT Server 4. 0 Windows for Workgroups Version 3.1 1 Requirement s • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed . • 3COM Etherlink 3C900 Ethernet card and drivers disk ver. 2.1. DOS ODI Driver Name: EL90X.DOS Size: 46KB Date ...

  • HP (Hewlett-Packard) 3C900 - page 26

    4 Connecting to a Windows NT Server 4. 0 Windows for Workgroups Version 3.1 1 9 Click on the “Install Microsoft Windows Network:” Option , and click “OK. ” 10 Click on the “Drivers” button from the “Network Setup” dialog box, and click on “Add Adapter”. 11 Click “OK” to accept the default choice of “Unlisted or Updated Net ...

  • HP (Hewlett-Packard) 3C900 - page 27

    4 Connecting to a Windows NT Server 4.0 Windows 95 SR2 Windows 95 SR 2 Requirement s • HP Vectra with Windows 95 SR2 . • 3COM Etherlink 3C900 Ethernet card and drivers disk Ver. 2.1. Driver Name: El90X.DOS Size: 45KB Date: 3/21/9 7 • Microsoft Windows NT Server 4.0 machine that supports Net BEUI, TCP/ IP, NWLink IPX/SPX, and NWLink NetBIOS tr ...

  • HP (Hewlett-Packard) 3C900 - page 28

    4 Connecting to a Windows NT Server 4. 0 Windows 95 SR 2 11 Click on “Other Locations” in the “Update Device Driver Location” dialog box, and set path to “A:” then click “OK.” (If you have an HP pre-loaded HDD, set the path statement to “C:LANDRV3C900DISK1”) . 12 “3Com EtherLink XL TPO 10Mb Ethernet Adapter” should now ...

  • HP (Hewlett-Packard) 3C900 - page 29

    4 Connecting to a Windows NT Server 4.0 Windows 95 SR2 ...

  • HP (Hewlett-Packard) 3C900 - page 30

    4 Connecting to a Windows NT Server 4. 0 Windows 95 SR 2 ...

  • HP (Hewlett-Packard) 3C900 - page 31

    4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 3.51 Windows NT Workstation Version 3.5 1 Requirement s • HP Vectra with Microsoft Windows NT Workstation 3.51 installed . • 3COM Etherlink 3C900 ethernet card and drivers disk ver. 2.1. Driver Name: OMESETUP.INF Size: 41KB Date: 3/14/97 • Microsoft Windows NT Workstation ...

  • HP (Hewlett-Packard) 3C900 - page 32

    4 Connecting to a Windows NT Server 4. 0 Windows NT Workstation Version 3.5 1 10 Double click on the “Network” icon in the “Control Panel” program group . 11 Click on “YES” in the “Network Settings” dialog box, and NT Networking will be installed on your computer . 12 Insert the Windows NT Workstaion CD. 13 In the “Windows NT Setu ...

  • HP (Hewlett-Packard) 3C900 - page 33

    4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 3.51 25 Set your IP address information in the “TCP/IP Configuration” dialog box, and click “OK”. (If you do not have the required TCP/IP Settings, contact your network administrator ) 26 At the “Domain/Workgroup Settings” dialog box, click on “OK” to accept the ...

  • HP (Hewlett-Packard) 3C900 - page 34

    4 Connecting to a Windows NT Server 4. 0 Windows NT Workstation Version 3.5 1 ...

  • HP (Hewlett-Packard) 3C900 - page 35

    4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0 Windows NT Workstation 4. 0 Requirement s • HP Vectra with Windows NT Workstation 4.0 Service Pack 3 . • 3COM Etherlink 3C900 Ethernet card and drivers disk ver 2.1 . • Driver Name: 3C90X.INF Size: 71KB Date: 11/25/96 Microsoft Windows NT Workstation 4.0 and Service Pack Media ...

  • HP (Hewlett-Packard) 3C900 - page 36

    4 Connecting to a Windows NT Server 4. 0 Windows NT Workstation 4. 0 9 Log onto the machine with Administrator privileges. (If you do not have the required information, contact your network administrator ) 10 Click on “Start” and move to “Settings”, open the “Control Panel” and double-click on “Network. ” 11 Click on “Yes” and a ...

  • HP (Hewlett-Packard) 3C900 - page 37

    4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0 26 If you know what your TCP/IP settings are, click “NO”, and enter the IP settings when prompted. If You DO NOT know what your TCP/IP settings will be click on “YES” to Obtain an IP address automatically, and continue. (If you do not have the required information, contact y ...

  • HP (Hewlett-Packard) 3C900 - page 38

    4 Connecting to a Windows NT Server 4. 0 Windows NT Workstation 4. 0 ...

  • HP (Hewlett-Packard) 3C900 - page 39

    ...

  • HP (Hewlett-Packard) 3C900 - page 40

    Version Number 3C900 Rev. 1 ...

Manufacturer HP (Hewlett-Packard) Category Network Card

Documents that we receive from a manufacturer of a HP (Hewlett-Packard) 3C900 can be divided into several groups. They are, among others:
- HP (Hewlett-Packard) technical drawings
- 3C900 manuals
- HP (Hewlett-Packard) product data sheets
- information booklets
- or energy labels HP (Hewlett-Packard) 3C900
All of them are important, but the most important information from the point of view of use of the device are in the user manual HP (Hewlett-Packard) 3C900.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals HP (Hewlett-Packard) 3C900, service manual, brief instructions and user manuals HP (Hewlett-Packard) 3C900. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product HP (Hewlett-Packard) 3C900.

Similar manuals

A complete manual for the device HP (Hewlett-Packard) 3C900, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use HP (Hewlett-Packard) 3C900 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of HP (Hewlett-Packard) 3C900.

A complete HP (Hewlett-Packard) manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual HP (Hewlett-Packard) 3C900 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the HP (Hewlett-Packard) 3C900, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the HP (Hewlett-Packard) 3C900, that we can find in the current document
3. Tips how to use the basic functions of the device HP (Hewlett-Packard) 3C900 - which should help us in our first steps of using HP (Hewlett-Packard) 3C900
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with HP (Hewlett-Packard) 3C900
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of HP (Hewlett-Packard) 3C900 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning HP (Hewlett-Packard) 3C900?

Use the form below

If you did not solve your problem by using a manual HP (Hewlett-Packard) 3C900, ask a question using the form below. If a user had a similar problem with HP (Hewlett-Packard) 3C900 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)