English dropdown-ico

Manual Rosewill RNX-G300EXLX

111 pages 3.68 mb
Download

Go to site of 111

Summary
  • Rosewill RNX-G300EXLX - page 1

    Wir eless Adapter RNX-G300EX/LX User Manual ...

  • Rosewill RNX-G300EXLX - page 2

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 1 - CONTENT Introduction ................................................................................................................... .................... - 2 - Specifications ..................................................................................................... ...

  • Rosewill RNX-G300EXLX - page 3

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 2 - INTRODUCTION Thank you for purchasing Wireless LAN PCI Car d. Wireless car d is a perfect combination pr oduct of performance and cost-eff ectiveness. It is sincerely h oped that you can enjoy the wir eless world thr o ugh this solidly profiled wireless car d. It provides a full ...

  • Rosewill RNX-G300EXLX - page 4

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 3 - SPECIFICA TIONS Interface PCI Standard 802.11b, 802.11g OS support 98SE, WinME, Win2000, WinXP32, WinXP64, Vista32, Vista64 Data rate 1,2,5.5, 11,6,8,12,18,24,36,48 , 54Mbps, depends on the wireless mode Frequency band BG:2.4 ~ 2.497 GHz Operation Channel 1~11(BG) Coverage Area I ...

  • Rosewill RNX-G300EXLX - page 5

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 4 - INST ALLA TION HARDWARE INST ALLA TION 1. Turn off your PC and remove the cover. 2. Insert the RNX-G30 0EX/ LX to an available PCI slot fi rmly. 3. Secure this card to the rear of the computer chassis 4. Put back the cover. 4. Fix the antenna to the an tenna connector of the card ...

  • Rosewill RNX-G300EXLX - page 6

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 5 - SOFTWARE INST ALLA TION (FOR ALL WINDOWS OS) After hardware installation complete, system will detect new hardware automatically as below: Found New Hard ware Wizard window pop s up, click Cancel . Insert the driver disk into your DVD-ROM. Click My Computer icon, then clic k DVD- ...

  • Rosewill RNX-G300EXLX - page 7

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 6 - Click Driver Installation Click I accept the term of the license agreement ,then click Next icon. ...

  • Rosewill RNX-G300EXLX - page 8

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 7 - Click Ralink Configuration T oo l , then click Next icon. Click Optimize for WiFi mode s, then click Next icon. ...

  • Rosewill RNX-G300EXLX - page 9

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 8 - Click Install icon. Click Finish icon. ...

  • Rosewill RNX-G300EXLX - page 10

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 9 - SOFTWA RE UNINST ALL Click My Computer icon, then click Add or Remove Pr ogram icon, and then click Ralink Wireless LAN icon and then click Remove icon. Click Y es, I want to restart my compu ter now icon, and then Finish icon. ...

  • Rosewill RNX-G300EXLX - page 11

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 10 - RALINK WIRELESS UTILITY ( RAUI ) OR WINDOWS ZERO CONFIGURA TION ( WZC ) In windows XP , it pr ovides wireless configuration utility named "Windows Zero configura tion" which pr ovides basic configuration function for Ra link Wireless NIC. Ralink's utility ( RaUI ) ...

  • Rosewill RNX-G300EXLX - page 12

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 11 - Figure 1-3 RaUI status with WZC active When activating WZC, there are couple dif ference on RaUI status compared to that with out WZC running. A. Profile button will be gray , pr ofile function is r emoved since the NIC is contr olled by WZC B. The connect and add profile functi ...

  • Rosewill RNX-G300EXLX - page 13

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 12 - USE WZC TO CONFIGURE WIRELESS NIC A. If connection is lost or not connected, th e status prompt as Figur e 1-4 will pop up. Figure 1-4 status prompt of no connection B. Right-click the network conn ection icon in task bar . Figure 1-5 Select WZC main status C. Select "Vie w ...

  • Rosewill RNX-G300EXLX - page 14

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 13 - Figure 1-6 Wir eless Network Connection D. Select intended AP and click "Connect" s hown as Figure 1-7. Then click "Connect Anyway" shown as Figure 1-8. ...

  • Rosewill RNX-G300EXLX - page 15

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 14 - Figure 1-7 Select intended AP : AP1, then click "Connect" ...

  • Rosewill RNX-G300EXLX - page 16

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 15 - Figure 1-8 Connect AP : AP1 successfully E. If you want to modify information about AP , click "Change advanced settings" shown as Figure 1-9. Then choose "Wireless Networks" label shown as Figur e 1-10. ...

  • Rosewill RNX-G300EXLX - page 17

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 16 - Figure 1-9 Click "Change adva nced settings" Figure 1-10 Choose "Wir eless Networks" label ...

  • Rosewill RNX-G300EXLX - page 18

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 17 - F . Click "Properties" shown as Figur e 1-11. Then click "OK" button. Figure 1-11 AP's pr operties G. After filling appropriate value, click "OK" bu tton. And the status will prompt up as Figur e 1-12. Figure 1-12 Network connection status H. C ...

  • Rosewill RNX-G300EXLX - page 19

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 18 - Figure 1-13 Show connection status by using WZC to do connection ...

  • Rosewill RNX-G300EXLX - page 20

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 19 - ST ART RAUI When starting RaUI, system will connect to the AP with best signal str ength without setting profile or ma tching pr ofile setting . When starting RaUI, it will issue a scan command to wir eless NI C. After two seconds, the AP lis t will updated with the result of BS ...

  • Rosewill RNX-G300EXLX - page 21

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 20 - A. Button Section : Include Profile page, Net work page, Ad vanced page, Statistics page, WMM page, WPS page, About button, Radio On/Off button and Help button. Figure 2-1-2 Button section Figure 2-1-3 Move to the left Figure 2-1-4 Move to the right B. Function Section : Corresp ...

  • Rosewill RNX-G300EXLX - page 22

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 21 - Figure 2-1-6 Network page Figure 2-1-7 Advance page ...

  • Rosewill RNX-G300EXLX - page 23

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 22 - Figure 2-1-8 Statistics page Figure 2-1-9 WMM page ...

  • Rosewill RNX-G300EXLX - page 24

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 23 - Figure 2-1-10 WPS page Figure 2-1-11 About page C. Status Section : Include Link Status, Authe ntication Status, AP's informa tion, Configuration and retrying the connection when authentication is f ailed. ...

  • Rosewill RNX-G300EXLX - page 25

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 24 - Figure 2-1-12 Link Status Figure 2-1- 13 Authentication Status Figure 2-1-14 AP's Information ...

  • Rosewill RNX-G300EXLX - page 26

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 25 - Figure 2- 1-15 Retry the connection Figure 2-1-16 Configuration At the mean time of starting RaUI, ther e is also a small Ra link icon appears within windows taskbar as Figur e 2-1-15. Y ou may double click it to bring up the main menu if you selected to close RaUI menu eariler ...

  • Rosewill RNX-G300EXLX - page 27

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 26 - Besides, the small icon will change color to r eflect current wir eless network connection status. The status indicates as follow: : Indicate Connected and Signal Str ength is Good. : Indicate Connected and Signal Str ength is Normal. : Indicated not connected yet. : Indicated w ...

  • Rosewill RNX-G300EXLX - page 28

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 27 - ICONS AND BUTTONS : Indicate connection is succes sful on curr ently activated pr ofile. Indicate connection is failed on curr ently activated pr ofile. Indicate network type is infrastructure mode. Indicate network type is Ad-hoc mode. Indicate security-enabled wir eless networ ...

  • Rosewill RNX-G300EXLX - page 29

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 28 - ADD/EDIT PROFILE There ar e thr ee methods to open Profile Editor f orm. A. Y ou ca n open it from "Add to Pr ofile" button in Site Surve y function. B. Y ou ca n open it from "Add" button in Profile function. C. Y ou ca n open it from "Edit" button ...

  • Rosewill RNX-G300EXLX - page 30

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 29 - D. Network T ype : There ar e two types, infrastructure and 802.11 Ad-hoc mode . Under Ad- hoc mode, user can also choose the preamble t ype, the available preambl e type includes auto and long. In addition to that, the channel field will be available for setup in Ad-hoc mode. E ...

  • Rosewill RNX-G300EXLX - page 31

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 30 - EXAMPLE TO ADD PROFILE IN PROFILE A. Click Add in Profile function. ...

  • Rosewill RNX-G300EXLX - page 32

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 31 - B. Add Profile page will pop u p. ...

  • Rosewill RNX-G300EXLX - page 33

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 32 - C. Change prof ile name to what you want to connect. Pull down the ssid and select one intended AP . The AP list is the r esult of last Network. ...

  • Rosewill RNX-G300EXLX - page 34

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 33 - D. Then, you can see the pr ofile which you set appear in th e pr ofile list. Click "Activate" .Activate the pr ofile setting. ...

  • Rosewill RNX-G300EXLX - page 35

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 34 - NETWORK Under the Network function, system will displa y the information of surrounding APs from last scan result. List informations include SSID, BSSID, Signal, Chan nel, Encryption algorithm, Authentication and Network type a s Figure 2-3-1-1 shown. Figure 2-3-1-1 Network fuct ...

  • Rosewill RNX-G300EXLX - page 36

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 35 - ICONS AND BUTTONS : Indicate connection is succes sful. Indicate network type is infrastructure mode. Indicate network type is Ad-hoc mode. Indicate security-enabled wir eless network. Indicate 802.11a wireless mode. mode. Indicate 802.11b wireless. Indicate 802.11g wireless mod ...

  • Rosewill RNX-G300EXLX - page 37

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 36 - CONNECTED NETWORK : A. When RaUI first ran, it will select the best AP to connect automatically . B. If user wants to connect to other AP . He can click "Conne ct" button for the intended AP to make connection. C. If the intended network has encryption other than " ...

  • Rosewill RNX-G300EXLX - page 38

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 37 - A-1.General information conta in AP's ssid, MAC addr ess, authentication type, encryption type, channel, network type, beacon interval, signal str ength and support ed rates. It shows as Figur e 2-3-1-2. Figure 2-3-1-2 General informaion about AP's deta l information ...

  • Rosewill RNX-G300EXLX - page 39

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 38 - A-2. WPS information contain authen ticatio n type, encryption type, config methods, devi ce password id , selected registrar , state, version, AP setup locked, UUID-E and RF ban ds as Figur e 2-3-1-3. The introduction indica tes as follow : A-2-1. Authentication T ype : Ther e ...

  • Rosewill RNX-G300EXLX - page 40

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 39 - Figure 2-3-1-3 WPS information about AP's detail informati on ...

  • Rosewill RNX-G300EXLX - page 41

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 40 - A-3. CCX information contains CCKM, Cmic and Ckip information. It shows as Figure 2-3-1-4. Figure 2-3-1-4 CCX information about AP's detail informatio n ...

  • Rosewill RNX-G300EXLX - page 42

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 41 - A-4. 802.11n information cont ains some related 802.11n information. It shows as Figure 2-3-1-5. Figure 2-3-1-5 802.11n informa tion ...

  • Rosewill RNX-G300EXLX - page 43

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 42 - EXAMPLE ON ADDING PROFILE IN NETWORK A. Select the intended network from AP list in Network function. ...

  • Rosewill RNX-G300EXLX - page 44

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 43 - B. Click "Add to Pr ofile". ...

  • Rosewill RNX-G300EXLX - page 45

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 44 - C. System will pop up Add Profile windows. Y ou can change profile name which you like most. ...

  • Rosewill RNX-G300EXLX - page 46

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 45 - D. Then, you can see the pr ofile which you set appear in the pr ofile list. Click "Activate" .Activate the pr ofile setting. ...

  • Rosewill RNX-G300EXLX - page 47

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 46 - ADV ANCED Figure 2-4 shows Advance function of RaUI. Figure 2-4 Advance function A. Wireless mode : Select wir e less mode. 802.11 B only , 80 2.11 A only , 802.11 B/G mix, 802.11 B/G/N mix, 802.11 A/B/G mix, and 802.11 A/B/G/N mix modes are supported. (802.11 A/B/G mix selectio ...

  • Rosewill RNX-G300EXLX - page 48

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 47 - ICONS AND BUTTONS: Show the information of Status Section. Hide the information of Status Section. ST A TISTICS Statistics page displays the deta il counter information base d on 802.11 MIB counters. This page tra nslates that MIB counters into a format easier for user to unde r ...

  • Rosewill RNX-G300EXLX - page 49

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 48 - C. RTS Frames Su ccessfully Receive CTS : Successfully r eceive CTS after sending RTS fr ame. D. RTS Frames Fail T o Receive CTS : Failed to receive CTS after sending RTS. E. Frames Retransmitted Successf ully : Successfully r etransmitted frames numbers. F . Reset counters to z ...

  • Rosewill RNX-G300EXLX - page 50

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 49 - WMM Figure 2-6-1 shows WMM function of RaUI. It involves "WMM Enable", "WMM - Power Save Enable" and DL S setup. The intr oduction indicates as follow : Figure 2-6-1 WMM function A. WMM Enable : Enable Wi-Fi Mu lti-Media. The setting method foll ows Section 2 ...

  • Rosewill RNX-G300EXLX - page 51

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 50 - EXAMPLE TO CONFIGURE TO ENABLE DLS (DIRECT LINK SETUP) A. Click "Direct Link Setup Enable" ...

  • Rosewill RNX-G300EXLX - page 52

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 51 - B. Change to "Network" function. And add a AP that supports DL S features to a Profile. The result will look like the below figure in Pr ofile page. The setting of DLS indicates as follow : A. Fill in the blanks of Direct Link with MAC Address of ST A. The ST A must co ...

  • Rosewill RNX-G300EXLX - page 53

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 52 - B. Timeout V alue repr esents that it disconnect automatically after some s econds. The value is integer . The integer must be between 0~65535. It represents that it always connects if the va lue is zer o. D efault value of Timeout V alue is 60 seconds. ...

  • Rosewill RNX-G300EXLX - page 54

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 53 - C. Click "Apply" button. The result will look like the below figure. Describe "DLS Status" as follow : A. As the up figur e, after configuring DLS successfully , show MAC addres s of the opposite side and Timeout V alue of setting in "DLS Status". I ...

  • Rosewill RNX-G300EXLX - page 55

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 54 - B-2. Double click. And the r esult will look like the below figure. C. Disconnect Dir ect Link Setup as follow : C-1. Select a dir ect link ST A. ...

  • Rosewill RNX-G300EXLX - page 56

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 55 - C-2. Click "T ear Down" button. The result will look like the below figure. ...

  • Rosewill RNX-G300EXLX - page 57

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 56 - EXAMPLE TO CONFIGURE TO ENABLE WI-FI MUL TI-MEDIA If you want to use "WMM-Power Sav e" or "Direct L ink" you must enable WMM. The set ting method of enabling WMM indicates as follows: A. Click "WMM Enable". ...

  • Rosewill RNX-G300EXLX - page 58

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 57 - B. Change to "Network" function. And add a AP that supports WMM features to a Profile. The r esult will look like the below figure in Pr ofile page. ...

  • Rosewill RNX-G300EXLX - page 59

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 58 - EXAMPLE TO CONFIGURE TO ENABLE WMM POWER SA VE A. Click "WMM-Power Save Enable". B. Please select which ACs you want to enable. The setting of en abling WMM-Power Save is successfully . ...

  • Rosewill RNX-G300EXLX - page 60

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 59 - WPS Figure 2-7-1 shows WPS function of RaUI . The intr oduction indicates as follow: Figure 2-7-1 WPS function ...

  • Rosewill RNX-G300EXLX - page 61

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 60 - A. WPS Configuration : The primary goal of Wi-Fi Protected Se tup (Wi-Fi Simple Configuration) is to simplify the security setup and management of Wi-Fi networks. Ralink ST A as an En rollee or external Registrar su pports the configuration setup using PIN configuration metho d ...

  • Rosewill RNX-G300EXLX - page 62

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 61 - WPS INFORMA TI ON ON AP WPS information contain au thentication type , encryption type, config meth ods, device password id, s elected registrar , state, version, AP setup locked, UUID-E and RF band s. The intr od uction indicates as follow : ...

  • Rosewill RNX-G300EXLX - page 63

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 62 - A. Authentication T ype : There ar e three type of authentication modes supported by RaCon fig. They are open , Shared , WP A-PSK and WP A system. B. Encryption T ype : For open and shar ed authentication mode , the s election of encryption type ar e None and WEP . For WP A, WP ...

  • Rosewill RNX-G300EXLX - page 64

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 63 - EXAMPLE TO ADD TO REGISTRAR USING PIN ME THOD The user obtains a device p assword (PIN Code) fr om the ST A and enters the password in to the Registrar . Both the Enr ollee and the Registrar use PIN Config method fo r the confi guration setup. The detail indicates as follows. A. ...

  • Rosewill RNX-G300EXLX - page 65

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 64 - B. Click "Rescan" button to update available WPS APs. C. Select an AP (SSID/BSSID) that ST A will join to. ...

  • Rosewill RNX-G300EXLX - page 66

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 65 - D. Click "PIN" button to start PIN connection. F . Enter PIN Code of ST A into the Regi strar when prompted by the Registrar . *Allow of an exchange betw een Step 4 and Step 5. *If you use Microsoft Window Connection Now as an External Re gistrar , you must start PIN c ...

  • Rosewill RNX-G300EXLX - page 67

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 66 - H. Configured and got one or multiple cr edential(s). I . Then connect successfully . The result will look like the below figure. ...

  • Rosewill RNX-G300EXLX - page 68

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 67 - J. Click "Detail" button. K. Y ou will look like the below figure. *If Credential#1 is r eliable and present, syst em will connect with Credential#1. On the contrary , system will auto rotate to the next existed cr edential. *Also you can click "Rotate" butto ...

  • Rosewill RNX-G300EXLX - page 69

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 68 - A. Asuccessful PIN Configuration : Start PIN connection - SSID ~> Begin associating to WPS AP ~> Associated to WPS AP ~> Sending EAPOL-Start ~> Sending EAP- Rsp (ID) ~> Receive EAP-Req (Start) ~> Sending M1 ~> Received M2 ~> (Received M2D ~> Sending EA ...

  • Rosewill RNX-G300EXLX - page 70

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 69 - EXAMPLE TO ADD TO REGISTRAR USING PBC ME THOD The PBC method requir es the user to press a PBC button on both the Enrollee and the Registrar within a two-minute interval called the Walk Time. If only one Registrar in PBC mode, wh ich PBC mode is obtained from ID 0x0004, is found ...

  • Rosewill RNX-G300EXLX - page 71

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 70 - B. Click PBC to start PBC connection. C. Push PBC on AP . *Allow of an exchange betw een Step 2 and Step 3. D. Then it can be shown "Rca nning AP" as the below figur e. ...

  • Rosewill RNX-G300EXLX - page 72

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 71 - E. When finding only one AP , join it. F . Check WPS Information on available WPS APs ...

  • Rosewill RNX-G300EXLX - page 73

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 72 - G. Configur ed and got one or multiple creden tial(s). H. Then connect successfu lly . The result will look like the below figur e. Describe "WPS Status Bar" - "PBC - xxx" as follow : ...

  • Rosewill RNX-G300EXLX - page 74

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 73 - A. A successful PBC Configuration : Start PBC connection ~> Scanning AP ~> Begin associating to WPS AP ~> Associated t o WPS AP ~> Sending EAPOL-Start ~> Sending EAP-Rsp (ID) ~> Receive EAP-Rsp (Start) ~> Sending M1 ~> Received M2 ~> Sending M3 ~> R ...

  • Rosewill RNX-G300EXLX - page 75

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 74 - EXAMPLE TO CONFIGURE A NETWORK/ AP USING PIN OR PBC METHOD A o to the box of Config Mode and select Registrar . ...

  • Rosewill RNX-G300EXLX - page 76

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 75 - B. Enter "Detail" of th e credential and ch ange configurations (SSID, Au thentication, Encryption and Key) manually if need. C. If PIN configuration setup, enter Pin Code r ead from your Enr ollee. D. Start PIN or PBC. The following pr ocedures are as similar as secti ...

  • Rosewill RNX-G300EXLX - page 77

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 76 - Describe "WPS Status Bar" - "PIN - xxx" as follow : A successful PIN Configuratio n : Start PIN connection - SSID ~> Begin associating to WPS AP ~> Associated to WPS AP ~> Sending EAPOL-Start ~> Sending EAP- Rsp (ID) ~> Receive M1 ~> Sending ...

  • Rosewill RNX-G300EXLX - page 78

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 77 - LINK ST A TUS Figure 2-9 is the link status page, it disp lays t he detail information curr ent connection. Figure 2-9 Link Status function A. Status : Current connection status. If no connection, if will show Disconnected. Otherwis e, the SSID and BSSID will show here. B. Extra ...

  • Rosewill RNX-G300EXLX - page 79

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 78 - AUTH. ENCR Y . SETTING - WEP/TKIP/AES Auth. Encry . Setting, shown a s Figure 3-1. Figure 3-1 Auth. Encry . Setting A. Authentication T ype : There ar e 7 type of authentication modes supported by R aUI. They are open, Shar ed, LEAP , WP A and WP A-PSK, WP A2 and WP A2-PSK ...

  • Rosewill RNX-G300EXLX - page 80

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 79 - 802.1X SETTING 802.1x is a authentication for "WP A" and "WP A2" certificate to serve r . AUTHENTICA TION TYPE : A. PEAP : Protect Extensible Authentication Protocol. PEAP tr ansport securely authentication data by using tunne ling between PEAP clients and an ...

  • Rosewill RNX-G300EXLX - page 81

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 80 - AUTHENTICA TION : A. Protocol : T unnel pr otocol, List informatio n include "EAP-MSCHAP v2", "EAP-TLS/Smart ca rd", "Generic T oken Card", "CHAP", "MS-CHAP", "MS-CHAP-V2", "P AP" and "EAP- MD5". B. ...

  • Rosewill RNX-G300EXLX - page 82

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 81 - - EAP F AST - A. Allow unauthenticated provision mode : Duri ng the P AC can be provisioned (distributed one time) to the client automatically . It only supported "Allow unauthenticated provision mode" and use "EAP-MSCHAP v2" authentication to authe nticate n ...

  • Rosewill RNX-G300EXLX - page 83

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 82 - EXAMPLE TO RECONNECT 802.1X AUTHENTICA TED CONNECTION AFTER 802.1X AUTHENTICA TED CONNECTION IS F AILED IN PROFILE There ar e two situatio ns to be able to reconnect 802.1x authenticated connection and authenticat e successfully after 802.1x authenticated connection is failed in ...

  • Rosewill RNX-G300EXLX - page 84

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 83 - D. Click "OK" button. If it conn ected successfully , th e result will look like the below figur e. ...

  • Rosewill RNX-G300EXLX - page 85

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 84 - When occurring "Timeout" : A. Authentication type chooses "PEAP", key identity into wpatest2. T unnel Protocol is "EAP-MSCHAP-v2, and tunnel identity is wpatest2 and tunnel password is test2. Those setting are same as our intended AP's setting. B. B ...

  • Rosewill RNX-G300EXLX - page 86

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 85 - c. If it connected succe ssfully , the result will look like the below figur e. ...

  • Rosewill RNX-G300EXLX - page 87

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 86 - EXAMPLE TO CONFIGURE CONNECTION WITH WEP ON A. Select AP with WEP encry ption and click "Connect" button. ...

  • Rosewill RNX-G300EXLX - page 88

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 87 - B . Auth. Encry . function pop up. ...

  • Rosewill RNX-G300EXLX - page 89

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 88 - C . Enter 1234567890 at Key#1 whic h is same as our intended AP's setting. ...

  • Rosewill RNX-G300EXLX - page 90

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 89 - D. Click "OK" button. The result will look like the below figure. ...

  • Rosewill RNX-G300EXLX - page 91

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 90 - EXAMPLE TO CONFIGURE CONNECTION WITH WP A-PSK A. Select the AP with WP A-PSK authenti cation mode and click "Con nect" button. ...

  • Rosewill RNX-G300EXLX - page 92

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 91 - B. Auth. Encry . function pop up. (If AP setup security to Both (TKIP + AES), system defines is AES that security is sever ely .) ...

  • Rosewill RNX-G300EXLX - page 93

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 92 - C. Authentication T ype is WP A-PSK. Select corr ect encryption (TKIP or AES). Enter WP A Pr e-Shared Key secret as 12345678. ...

  • Rosewill RNX-G300EXLX - page 94

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 93 - D. Click "OK" button. Be car eful, if the WP A Pre-Shared Key en tered is not correct, even th ough the AP can be connected, but you won’ t be able to exchange any data frames . ...

  • Rosewill RNX-G300EXLX - page 95

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 94 - EXAMPLE TO CONFIGURE CONNECTION WITH WP A A. Select AP with WP A authentication mode and click "Connect" button. ...

  • Rosewill RNX-G300EXLX - page 96

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 95 - B. Auth. Encry . function pop up. (If AP setup security to Both (TKIP + AES), system defines is AES that security is severely . ) ...

  • Rosewill RNX-G300EXLX - page 97

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 96 - C. Click "8021X" button and 802.1x setting page will pop up. ...

  • Rosewill RNX-G300EXLX - page 98

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 97 - D. Authentication type and setting method : PEAP : A. Authentication type chooses PEAP , key identity into wpatest2. Protocol chooses EAP- MSCHAP v2 for tunnel authentication, tunnel ide ntity is wpatest2 and tunnel password is test2. Those setting are same as our intended AP&ap ...

  • Rosewill RNX-G300EXLX - page 99

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 98 - B. Click OK. The r esult will look like the below figure. *If you want to disconnect, please c lick cancel button in Authentication S tatus function. *In Profile function, show "Profile Name" option only in adding AP to Profile function. ...

  • Rosewill RNX-G300EXLX - page 100

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 99 - C. If it connected succe ssfully , the result will look like the below figure. ...

  • Rosewill RNX-G300EXLX - page 101

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 100 - TLS / Smart Card : A. Authentication type chooses TLS / Smart Car d, TLS only need identity that is wpatest2 for server authentication. ...

  • Rosewill RNX-G300EXLX - page 102

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 101 - B. TLS must use client certification. Click "Client Certification" button and choose a certification for server au thentication. ...

  • Rosewill RNX-G300EXLX - page 103

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 102 - C. Click "OK" button. The result will look like the below figur e. *If you want to disconnect, please c lick cancel button in Authentication S tatus function. *In Profile function, show "Profile Name" option only in adding AP to Profile function. ...

  • Rosewill RNX-G300EXLX - page 104

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 103 - D. If it connected succe ssfully , the result will look like the below figur e. ...

  • Rosewill RNX-G300EXLX - page 105

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 104 - TTLS : A. Authentication type chooses TTLS, ide ntity is wpatest2. Protocol chooses CHAP for tunnel authentication, tunnel identity is wpatest2 and tunnel password is test2. Those setting are same as our intended AP's setting. ...

  • Rosewill RNX-G300EXLX - page 106

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 105 - B. Click "OK" button. The result will look like the below figur e. *If you want to disconnect, please c lick cancel button in Authentication S tatus function. *In Profile function, show "Profile Name" option only in adding AP to Profile function. ...

  • Rosewill RNX-G300EXLX - page 107

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 106 - C. If it connected succe ssfully , the result will look like the below figure. ...

  • Rosewill RNX-G300EXLX - page 108

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 107 - EAP-F AST : A. Authentication type choose s EAP-F AST , key identity into wp atest2; key domain name into blank space. T unnel Pr otocol only supported "Generic T oken Card" now , and tunnel identity is wpatest2 and tunnel password is test2. Those setting are same as ...

  • Rosewill RNX-G300EXLX - page 109

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 108 - B. Click "OK" button. The result will look like the below figur e. ...

  • Rosewill RNX-G300EXLX - page 110

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 109 - C. If it connected succe ssfully , the result will look like the below figure. *If you want to disconnect, please c lick cancel button in Authentication S tatus function. *In Profile function, show "Profile Name" option only in adding AP to Profile function. ...

  • Rosewill RNX-G300EXLX - page 111

    Wireless Adap ter R N X - G 3 0 0 E X / L X U s e r M a n u a l - 110 - ACKNOWLEDGEMENTS The above setting is test platf orm by RaLink technology corp. User can set the function in accordance with A.P . Acknowledgements: "This product includes software developed by MDC and its li censors. This pr oduct includes software developed by the OpenSS ...

Manufacturer Rosewill Category Network Card

Documents that we receive from a manufacturer of a Rosewill RNX-G300EXLX can be divided into several groups. They are, among others:
- Rosewill technical drawings
- RNX-G300EXLX manuals
- Rosewill product data sheets
- information booklets
- or energy labels Rosewill RNX-G300EXLX
All of them are important, but the most important information from the point of view of use of the device are in the user manual Rosewill RNX-G300EXLX.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Rosewill RNX-G300EXLX, service manual, brief instructions and user manuals Rosewill RNX-G300EXLX. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Rosewill RNX-G300EXLX.

Similar manuals

A complete manual for the device Rosewill RNX-G300EXLX, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Rosewill RNX-G300EXLX by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Rosewill RNX-G300EXLX.

A complete Rosewill manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Rosewill RNX-G300EXLX - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Rosewill RNX-G300EXLX, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Rosewill RNX-G300EXLX, that we can find in the current document
3. Tips how to use the basic functions of the device Rosewill RNX-G300EXLX - which should help us in our first steps of using Rosewill RNX-G300EXLX
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Rosewill RNX-G300EXLX
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Rosewill RNX-G300EXLX in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Rosewill RNX-G300EXLX?

Use the form below

If you did not solve your problem by using a manual Rosewill RNX-G300EXLX, ask a question using the form below. If a user had a similar problem with Rosewill RNX-G300EXLX it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)