Manual Rowenta Powerglide 2

12 pages 0.3 mb
Download

Go to site of 12

Summary
  • Rowenta Powerglide 2 - page 1

    Powerglide 2 Instructions for use ...

  • Rowenta Powerglide 2 - page 2

    2 IMPORTANT SAFEGUARDS When using your iron, basic safety precautions should always be followed, including the following: Read all instructions before using the iron. 1. Use iron only for its intended use. 2. To protect against a risk of electric shock, do not immerse the iron in water or other liquids. 3. The iron should always be turned to minimu ...

  • Rowenta Powerglide 2 - page 3

    3 DM 253/273/293 SPECIAL INSTRUCTIONS 1. This is a 1400 watt appliance. To avoid a circuit over- load, do not operate another high wattage appliance on the same circuit. 2. If an extension cord is absolutely necessary, a 12- ampere cord should be used. Cords rated for less amperage may overheat. Care should be taken to arrange the cord so that it c ...

  • Rowenta Powerglide 2 - page 4

    4 ■ Description: A Spray nozzle B Water filling inlet C Variable steam control D Self clean button E Spray button F Burst of steam button G Auto-off indicator light (depending on model) H Temperature control dial I Swiveling cord protector J Supply cord K Temperature light L Transparent water tank M Cord wrap N Soleplate according to model – St ...

  • Rowenta Powerglide 2 - page 5

    5 DM 253/273/293 BEFORE USE M Please read the instructions for use and the Important Safeguards carefully. M Slowly peel the protective cover off the soleplate or remove the transparent soleplate protector. M It is normal for a small amount of smoke to be produced the first time the iron is used. This will quickly disappear. 3-WAY AUTO-OFF (dependi ...

  • Rowenta Powerglide 2 - page 6

    6 SELECTING THE TEMPERATURE Set the temperature control dial according to the type of fabric you are ironing. Check the fabric's label for appropriate setting. ● synthetics (low temperature) ●● silk, wool (medium temperature) ●●● cotton, linen (high temperature) To avoid an automatic switch off while the iron is heating up, always ...

  • Rowenta Powerglide 2 - page 7

    7 DM 253/273/293 BURST OF STEAM M To remove stubborn wrinkles or press in a sharp crease, use the burst of steam button. M Press the button firmly, a strong burst of steam penetrates deep into the fabric. M Leave an interval of at least four seconds between pressing the burst of steam button. M With water in the tank, the burst of steam button can ...

  • Rowenta Powerglide 2 - page 8

    8 WATER TO USE IN ROWENTA IRONS Tap water Rowenta irons are designed to be used with REGULAR TAP WATER (up to 12 grains of hardness). If your water is harder than this, Rowenta recommends mixing half tap water with half distilled water which reduces the hardness; or use undiluted inexpensive bottled spring water. Never use 100% distilled water sinc ...

  • Rowenta Powerglide 2 - page 9

    9 DM 253/273/293 Vapodur ® Valve The patented Vapodur ® valve ensures that the opening which allows the water to drip from the water tank into the steam chamber remains unaffected by hard water deposits. To ensure your iron continues to steam efficiently the valve MUST be opened and closed a few times. This is done by moving the variable steam co ...

  • Rowenta Powerglide 2 - page 10

    10 Problem Possible cause Solution Iron is leaking. Use only tap water . NEVER USE 100% DISTILLED WA TER. The iron is designed to use tap water . In very hard water areas we recommend mixing half tap water with half distilled water . Softened water . If you experience leaking or spitting, change to untreated tap water or a 50/50 tap/distilled water ...

  • Rowenta Powerglide 2 - page 11

    11 DM 253/273/293 ...

  • Rowenta Powerglide 2 - page 12

    12 LIMITED WARRANTY All Rowenta products are warranted for 1 year from date of purchase against defects in material and workmanship. During this period, any Rowenta product that, upon inspection by Rowenta, is proved defective, will be repaired or replaced, at Rowenta's option, without charge to the customer. If a replacement product is sent, ...

Manufacturer Rowenta Category Iron

Documents that we receive from a manufacturer of a Rowenta Powerglide 2 can be divided into several groups. They are, among others:
- Rowenta technical drawings
- Powerglide 2 manuals
- Rowenta product data sheets
- information booklets
- or energy labels Rowenta Powerglide 2
All of them are important, but the most important information from the point of view of use of the device are in the user manual Rowenta Powerglide 2.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Rowenta Powerglide 2, service manual, brief instructions and user manuals Rowenta Powerglide 2. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Rowenta Powerglide 2.

Similar manuals

A complete manual for the device Rowenta Powerglide 2, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Rowenta Powerglide 2 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Rowenta Powerglide 2.

A complete Rowenta manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Rowenta Powerglide 2 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Rowenta Powerglide 2, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Rowenta Powerglide 2, that we can find in the current document
3. Tips how to use the basic functions of the device Rowenta Powerglide 2 - which should help us in our first steps of using Rowenta Powerglide 2
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Rowenta Powerglide 2
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Rowenta Powerglide 2 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Rowenta Powerglide 2?

Use the form below

If you did not solve your problem by using a manual Rowenta Powerglide 2, ask a question using the form below. If a user had a similar problem with Rowenta Powerglide 2 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)