English dropdown-ico

Manual Panasonic WV-CP474

12 pages 0.23 mb
Download

Go to site of 12

Summary
  • Panasonic WV-CP474 - page 1

    1. Do not attempt to disassemble the camera. To prevent electric shock, do not remove screws or covers. There are no user-serviceable parts inside. Ask a qualified service personnel for servic- ing. 2. Handle the camera with care. Do not abuse the camera. Avoid striking, shaking, etc. The camera could be damaged by improper handling or storage. 3. ...

  • Panasonic WV-CP474 - page 2

    1. The following functions are built in. (1) Auto Light Control (ALC)/Electronic Light Control (ELC) (2) The SUPER-D 2 function eliminates interference by strong background lighting which makes the camera picture dark, such as a spotlight. Dynamic range of 46 dB. (3) Various External Sync Functions, including Gen-Lock (4) Auto/Manual White Balance ...

  • Panasonic WV-CP474 - page 3

    Copper wire #24 #22 #20 #18 size (AWG) (0.22mm 2 ) (0.33mm 2 ) (0.52mm 2 ) (0.83mm 2 ) Length (m) 95 150 255 425 of Cable (Approx.) (ft) 314 495 842 1 403 Video Cable 1. It is recommended to use a monitor whose resolution is at least equal to that of the camera. 2. The maximum extensible coaxial cable length between the camera and the monitor is sh ...

  • Panasonic WV-CP474 - page 4

    Mounting the Lens Note: Before you mount the lens, loosen the screw on the side of the camera, and rotate the ring clockwise until it stops. If the ring is not at the end, the inner glass or CCD image sensor may be damaged. 1. Mount the lens by turning it clock- wise on the lens mount of the cam- era. Note: When mounting the C-mount lens on the cam ...

  • Panasonic WV-CP474 - page 5

    Left Button Set Button Right Button Down Button Up Button Up Button ( J ) : Moves the cursor upwards. Use this button to select an item or adjust the parameters. Down Button ( K ) : Moves the cursor downwards. Use this button to select an item or adjust the parameters. Right Button ( M ) : Moves the cursor to the right. Use this button to select or ...

  • Panasonic WV-CP474 - page 6

    (To be continued reverse page) SETTING PROCEDURES Notes: • The CAMERA ID stops at the edges of the monitor screen. • The CAMERA ID moves faster if any of L / M / J / K is kept pressed for a sec- ond or more. 2. Light Control Setting (ALC/ELC) You can select the mode for adjusting the lens iris. ALC: If you use the auto iris lens, select this pa ...

  • Panasonic WV-CP474 - page 7

    2-2. ALC Mode with SUPER-D2 OFF and ELC Mode Note: If ELC is selected, set MASK SET according to this procedure. 1. Move the cursor to SUPER-D2 and select OFF. (When you select ELC, SUPER-D2 is not available.) The MASK SET appears on the menu. 2. Move the cursor to MASK SET and press I . The 48 mask areas appear on the monitor screen. The cursor is ...

  • Panasonic WV-CP474 - page 8

    6. Synchronization Setting (SYNC) You can select internal sync (INT) mode or line-lock (LL) mode. Additionally, this model accepts the VBS signal (composite color video or blackburst signal) and VS signal (B/W composite video or composite sync signal). The VD2 signal (multiplexed vertical drive sig- nal) with the composite video output signal from ...

  • Panasonic WV-CP474 - page 9

    5. Supply the video output signal of the camera to be adjusted and the refer- ence gen-lock input signal to a dual- trace oscilloscope. 6. Set the oscilloscope to the horizontal rate and expand the horizontal sync portion on the oscilloscope. 7. Move the cursor to H PHASE. 8. Adjust the horizontal phase by press- ing L or M . The adjustable range i ...

  • Panasonic WV-CP474 - page 10

    Manual Fine Adjustment for AWC (ATW) You can set the white balance items manually. 1. To set MASK SET, proceed as described in steps 2 to 4 of “ ALC mode with SUPER-D2 OFF and ELC mode ” . 2. Move the cursor to R. 3. Press L or M to obtain the optimum amount of red gain. 4. Move the cursor to B. 5. Press L or M to obtain the optimum amount of b ...

  • Panasonic WV-CP474 - page 11

    1. Move the cursor to BW. 2. Select AUTO1, AUTO2, EXT, ON or OFF using L or M . AUTO1: The camera selects black and white mode if the picture is dark, or color mode if the picture is bright enough. Note: Color picture switches to black-and-white picture and vice versa in approxi- mately 1 or 2 minutes after detection of illuminance. AUTO2: Applying ...

  • Panasonic WV-CP474 - page 12

    Pick-up Device: 771 (H) x 492 (V) pixels, Interline Transfer CCD Scanning Area: 4.8 (H) x 3.6 (V) mm (Equivalent to scanning area of 1/3 ” pick-up tube) Scanning: 525 lines/60 fields/30 frames Horizontal: 15.734 kHz Vertical: 59.94 Hz Synchronization: Internal, Line-locked, External (VS/VBS) or Multiplexed Vertical Drive (VD2) selectable Video Ou ...

Manufacturer Panasonic Category Security Camera

Documents that we receive from a manufacturer of a Panasonic WV-CP474 can be divided into several groups. They are, among others:
- Panasonic technical drawings
- WV-CP474 manuals
- Panasonic product data sheets
- information booklets
- or energy labels Panasonic WV-CP474
All of them are important, but the most important information from the point of view of use of the device are in the user manual Panasonic WV-CP474.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Panasonic WV-CP474, service manual, brief instructions and user manuals Panasonic WV-CP474. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Panasonic WV-CP474.

Similar manuals

A complete manual for the device Panasonic WV-CP474, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Panasonic WV-CP474 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Panasonic WV-CP474.

A complete Panasonic manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Panasonic WV-CP474 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Panasonic WV-CP474, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Panasonic WV-CP474, that we can find in the current document
3. Tips how to use the basic functions of the device Panasonic WV-CP474 - which should help us in our first steps of using Panasonic WV-CP474
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Panasonic WV-CP474
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Panasonic WV-CP474 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Panasonic WV-CP474?

Use the form below

If you did not solve your problem by using a manual Panasonic WV-CP474, ask a question using the form below. If a user had a similar problem with Panasonic WV-CP474 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)