Manual Philips TDA8303

21 pages 0.14 mb
Download

Go to site of 21

Summary
  • Philips TDA8303 - page 1

    DA T A SH EET Preliminary specification File under Integrated Circuits, IC02 July 1992 INTEGRA TED CIRCUITS TDA8303 TDA8303A Small signal combination IC for black/white TV ...

  • Philips TDA8303 - page 2

    July 1992 2 Philips Semiconductors Preliminary specification Small signal combination IC for black/white TV TDA8303 TDA8303A FEA TURES • Video IF amplifier with synchronous demodulator • Automatic gain control (AGC) detector suitable for negative modulation • AGC tuner • Automatic frequency control (AFC) circuit with sample-and-hold • Vi ...

  • Philips TDA8303 - page 3

    July 1992 3 Philips Semiconductors Preliminary specification Small signal combination IC for black/white TV TDA8303 TDA8303A QUICK REFERENCE DA T A Notes to the quick reference data 1. Pin 11 has a double function. When during switch-on a current of 9 mA is supplied to this pin, it is used to start the horizontal oscillator. The main supply can th ...

  • Philips TDA8303 - page 4

    July 1992 4 Philips Semiconductors Preliminary specification Small signal combination IC for black/white TV TDA8303 TDA8303A Fig.1 Block diagram ...

  • Philips TDA8303 - page 5

    July 1992 5 Philips Semiconductors Preliminary specification Small signal combination IC for black/white TV TDA8303 TDA8303A PINNING AGC circuit The AGC circuit of the TDA8303/TDA8303A is a top-sync detector. The video signal coming from the video amplifier passes a 2nd order low-pass filter before it is compared with an internal reference level. ...

  • Philips TDA8303 - page 6

    July 1992 6 Philips Semiconductors Preliminary specification Small signal combination IC for black/white TV TDA8303 TDA8303A Narrow window mode: divider ratio between 522 and 528 (60 Hz); or 622 and 628 (50 Hz). • The divider system switches over to narrow window mode when the up/down counter has reached his maximum value of 15 approved vertical ...

  • Philips TDA8303 - page 7

    July 1992 7 Philips Semiconductors Preliminary specification Small signal combination IC for black/white TV TDA8303 TDA8303A CHARACTERISTICS V P = 12 V ;T amb = 25 ° C; carrier 38.9 MHz negative modulation, unless otherwise specified SYMBOL P ARAMETER CONDITIONS MIN. TYP . MAX. UNIT Supply (pin 7) V P supply voltage range 9.5 12 13.2 V I P suppl ...

  • Philips TDA8303 - page 8

    July 1992 8 Philips Semiconductors Preliminary specification Small signal combination IC for black/white TV TDA8303 TDA8303A S/N signal-to-noise ratio 10 mV input signal 50 57 − dB S/N signal-to-noise ratio end of gain control range 50 62 − dB V 17 residual carrier signal − 21 0 m V V 17 residual 2nd harmonic of carrier signal − 21 0 m V T ...

  • Philips TDA8303 - page 9

    July 1992 9 Philips Semiconductors Preliminary specification Small signal combination IC for black/white TV TDA8303 TDA8303A Sound circuit (note 12 ) V 15 input limiting voltage V O(max) = − 3 dB − 400 800 µ V R 15 input resistance − 2.6 − k Ω C 15 input capacitance − 6 − pF AMS AM suppression note 13 53 58 − dB V 12(RMS) AF outpu ...

  • Philips TDA8303 - page 10

    July 1992 10 Philips Semiconductors Preliminary specification Small signal combination IC for black/white TV TDA8303 TDA8303A S ECOND CONTROL LOOP ( POSITIVE EDGE ) control sensitivity note 22 − 100 − t d control range − 25 −µ s P HASE ADJUSTMENT ( VIA SECOND CONTROL LOOP ) control sensitivity − 25 −µ A/ µ s α maximum allowed phase ...

  • Philips TDA8303 - page 11

    July 1992 11 Philips Semiconductors Preliminary specification Small signal combination IC for black/white TV TDA8303 TDA8303A Notes to the characteristics 1. Pin 11 has a double function. When during switch-on a current of 9 mA is supplied to this pin, it is used to start the horizontal oscillator. The main supply can then be obtained from the hor ...

  • Philips TDA8303 - page 12

    July 1992 12 Philips Semiconductors Preliminary specification Small signal combination IC for black/white TV TDA8303 TDA8303A connected to the supply. The reference circuit must be tuned in such a way that the output is symmetrical clipping at maximum volume. 13. The test set-up is illustrated by Fig.6. The AM rejection curve (typical) is illustra ...

  • Philips TDA8303 - page 13

    July 1992 13 Philips Semiconductors Preliminary specification Small signal combination IC for black/white TV TDA8303 TDA8303A Fig.2 Video output signal. handbook, full pagewidth MLA667 100% 95% 30% 17.5% Fig.3 EBU test signal waveform (line 330). handbook, full pagewidth MBC211 100% 86% 72% 58% 44% 30% 64 60 56 52 48 44 40 36 32 22 12 10 26 µ s ...

  • Philips TDA8303 - page 14

    July 1992 14 Philips Semiconductors Preliminary specification Small signal combination IC for black/white TV TDA8303 TDA8303A Fig.4 Test set-up intermodulation. Input signal conditions SC = Sound carrier CC = Chrominance carrier PC = Picture carrier All with respect to top sync level Value a t 1 . 1 M H z : 2 0 l o g V O at 4.4 MHz V O at 1.1 MHz ...

  • Philips TDA8303 - page 15

    July 1992 15 Philips Semiconductors Preliminary specification Small signal combination IC for black/white TV TDA8303 TDA8303A Fig.5 Signal-to-noise ratio as a function of the input voltage (0 dB = 100 mV). Fig.6 Test set-up AM suppression. ...

  • Philips TDA8303 - page 16

    July 1992 16 Philips Semiconductors Preliminary specification Small signal combination IC for black/white TV TDA8303 TDA8303A Fig.7 AM suppression. Fig.8 Volume control characteristics. ...

  • Philips TDA8303 - page 17

    July 1992 17 Philips Semiconductors Preliminary specification Small signal combination IC for black/white TV TDA8303 TDA8303A Fig.9 Timing diagram. ...

  • Philips TDA8303 - page 18

    July 1992 18 Philips Semiconductors Preliminary specification Small signal combination IC for black/white TV TDA8303 TDA8303A T able 1 Switching levels coincidence detector CONDITION V 22 CONTROL SENSITIVITY HORIZONT AL OSCILLA TOR (kHz/ µ S) T2 - T1 T3 = SCAN V 22 > 6.7 V and strong signal 1 1.3 7.6 weak signal 1.3 1.3 1 < V 22 < 5.7 V ...

  • Philips TDA8303 - page 19

    July 1992 19 Philips Semiconductors Preliminary specification Small signal combination IC for black/white TV TDA8303 TDA8303A Fig.12 Application diagram. ...

  • Philips TDA8303 - page 20

    July 1992 20 Philips Semiconductors Preliminary specification Small signal combination IC for black/white TV TDA8303 TDA8303A P ACKAGE OUTLINE UNIT A max. 1 2 b 1 (1) (1) (1) cD E w eM H L REFERENCES OUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC EIAJ mm inches DIMENSIONS (inch dimensions are derived from the original mm dimensions) SOT1 ...

  • Philips TDA8303 - page 21

    July 1992 21 Philips Semiconductors Preliminary specification Small signal combination IC for black/white TV TDA8303 TDA8303A SOLDERING Introduction There is no soldering method that is ideal for all IC packages. Wave soldering is often preferred when through-hole and surface mounted components are mixed on one printed-circuit board. However, wave ...

Manufacturer Philips Category Handheld TV

Documents that we receive from a manufacturer of a Philips TDA8303 can be divided into several groups. They are, among others:
- Philips technical drawings
- TDA8303 manuals
- Philips product data sheets
- information booklets
- or energy labels Philips TDA8303
All of them are important, but the most important information from the point of view of use of the device are in the user manual Philips TDA8303.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Philips TDA8303, service manual, brief instructions and user manuals Philips TDA8303. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Philips TDA8303.

Similar manuals

A complete manual for the device Philips TDA8303, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Philips TDA8303 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Philips TDA8303.

A complete Philips manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Philips TDA8303 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Philips TDA8303, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Philips TDA8303, that we can find in the current document
3. Tips how to use the basic functions of the device Philips TDA8303 - which should help us in our first steps of using Philips TDA8303
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Philips TDA8303
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Philips TDA8303 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Philips TDA8303?

Use the form below

If you did not solve your problem by using a manual Philips TDA8303, ask a question using the form below. If a user had a similar problem with Philips TDA8303 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)