English dropdown-ico

Manual Canon MX300

120 pages 4.28 mb
Download

Go to site of 120

Summary
  • Canon MX300 - page 1

    QT51346V01 series Quick St art Guide QT5-1346-V01 XXXXXXXX © CANON INC. 2007 PRINTED IN THAILAND The following FINE Cartridges are compatible with this product. For information on product specificat ions, please visit our website at www .usa.canon.com Quick S t art Guide Office All-In-One series ...

  • Canon MX300 - page 2

    Ordering Information For additional supplies, use the foll owing descriptions and order number s. Description Order # FINE Cartridges PG-30 Black 1899B002 CL-31 Color 1900B002 PG-40 Black 0615B002 CL-41 Color 0617B002 PG-50 Black 0616B002 CL-51 Color 0618B002 Canon S pecialty Papers All Occasion Photo Cards (4" x 8"/ 50 sheets) 1029A069 G ...

  • Canon MX300 - page 3

    Office All-In-One Quick St art Guide series ...

  • Canon MX300 - page 4

    Canon PIXMA MX300 series Office All-In-One Quick S tart Guide. Copyright This manual is copyrighted by Canon U.S.A., Inc. wi th all rights reserved. Under the copyright laws, this manual may not be reproduced in an y form, in whole or in part, without the prior written consent of Canon U.S.A., Inc. © 2007 Canon U.S.A., Inc. Disclaimer Canon U.S.A. ...

  • Canon MX300 - page 5

    T able of Content s 1 Before Using the Machine ............................. 2 Operation Panel.......................... ................. ... 2 Menu Items .......................... ................. .......... 4 Turning the Machine On and Off .................... 6 Handling the Ori ginal Document ............... ...... 8 Loading Printin g Paper . ...

  • Canon MX300 - page 6

    2 Before Using the Machine Before Using the Machine Operation Panel (1) ON/OFF butto n / Power lamp T urns the machine on and off. Lights or flashes green to indicate the power status. Before turning on the machine, make sure the Document Cover is closed. (2) COPY button Switches the machine to copy mode. (3) In Use /Memory lamp Flashes when the te ...

  • Canon MX300 - page 7

    3 Before Using the Machine (14) Coded Dial button Press this button and a two-digit code to dial a pr e-registered fax/telephone number . (15) T one button Switches temporarily to tone dialing. Also changes the mode when entering characters. (16) OK b utton Finalizes your selection for the menu or setting item. Dismisses the error message and resum ...

  • Canon MX300 - page 8

    4 Before Using the Machine Menu Items Press the Menu button to display the menu items. Y ou can specify the special copy settings, various fax settings, or perform the machine maintenance by using these menu items. Press the Settings button to display the setting items in copy mode or fax mode. Y ou can specify the various print settings in copy mo ...

  • Canon MX300 - page 9

    5 Before Using the Machine z FA X m o d e Menu button F AX SETTINGS RECEIVE MODE SET (p age 45) F AX PRIORITY MODE FA X O N LY M O D E DRPD *3 NETWORK SWITCH *2 TEL PRIORITY MODE MEMORY REFERENCE (page 52) PRINT MEMORY LIST PRINT DOCUMEN T DELETE DOCUMENT PRNT REPORT/LIST (page 55) ACTIVITY REPORT SPEED DIAL LIST USER’S DA T A LIST MEMORY LIST CO ...

  • Canon MX300 - page 10

    6 Before Using the Machine T urning the Machine On and Off T urn on the machine before printing.  T urning on the Mac hine Before turning on the machine, confirm the following. z The FINE Cartridges a re installed properly . If you are using the machine connected to a computer, confirm also the following. z The machine is connected to your compu ...

  • Canon MX300 - page 11

    7 Before Using the Machine z Screen-saver M ode The LCD goes out if the machine is not operated for about five minutes*. Perform a print operation to resto re the display . * Y ou cannot change the wait time before the LCD goes out. Note When you wa nt to restore the d isplay , perform any operation su ch as copying, faxing, or scann ing, or press ...

  • Canon MX300 - page 12

    8 Before Using the Machine Handling the Original Document This section describes how to load t he or iginal document on the Platen Glass.  Original Document Requirements The original documents you load on the Platen Glass for copying, scanning, or faxing must meet these requirements:  Loading Original Document s Load originals to copy , scan, ...

  • Canon MX300 - page 13

    9 Before Using the Machine Loading Printing Paper This section describes how to load printing paper in the Rear Tray . z Using S pecialty Media Canon recommends that you use Canon genuine media to ensure optimal print qua lity . z Photo Quality Media z Glossy Photo Paper z Matte Photo Paper z Photo Paper Plus Double Sided z Photo Paper Plus Glossy ...

  • Canon MX300 - page 14

    10 Before Using the Machine  Paper Handling z Recommended Paper and Requirement s *1 Paper with a Model Number is Canon specialty me dia. Refer to the instruction manua l supplied with the paper for detailed informat ion on the printable side and notes on handling paper . For information on the paper sizes availab le for each Canon genuine paper ...

  • Canon MX300 - page 15

    11 Before Using the Machine *3 Proper feeding of paper may not be possible at the maximum capacity depending on the type of paper or environmental conditions (either ve ry high or low temperature and humidity). In such cases, reduce the sheets of paper you load at a time to around half (aroun d 0.2 inches / 5 mm in paper stack height). *4 Available ...

  • Canon MX300 - page 16

    12 Before Using the Machine  Loading Paper 1 Flatten the four corners of the paper before loading it. Import ant z Load A4, Lett er , or Legal-sized plain paper when rec eiving faxe s. z If you cu t plain paper to 4" x 6" / 101.6 x 1 52.4 mm, 5" x 7" / 127.0 x 177.8 mm, or 2.13" x 3.39" / 54.0 x 86 .0 mm (credit ca ...

  • Canon MX300 - page 17

    13 Before Using the Machine 2 Prepare to load paper . (1) Open the Rear Tr ay . (2) Pull out the Paper Support. Put your finger in the rounded indent of the Paper Support and pull it out until it stops. (3) Open the Paper Output Tr ay . Put your finger in the rounded indent beside the Paper Output Tray and open it gently . (4) Open the Output Tray ...

  • Canon MX300 - page 18

    14 Before Using the Machine  Loading Envelopes Use either European DL or US Comm. Env . #10-sized envelope. 1 Prepare the envelopes. z Press down on all four corners and edges of the envelop es to flatten them. z If the envelopes are curled, hold the opposite cor ner s and gently twist them in the opposite direction. z If the flap of an envelope ...

  • Canon MX300 - page 19

    15 Before Using the Machine 2 Load the envelop es. (1) Load the envelope against the right side of the Rear Tray . Load with the address side facing UP and the rear flaps DOWN on the left. Up to 10 envelopes can be loaded at once. (2) Pinch the Paper Guide and slide it against the left side of the envelope. (3) Set the Paper Thickness Lever to the ...

  • Canon MX300 - page 20

    16 Before Using the Machine  Loading Small-Sized Paper Y ou can use 4" x 6" / 101. 6 x 152.4 mm, 5" x 7 " / 127.0 x 177.8 m m, and Credit card- sized papers. 1 Load the paper . (1) Load the paper against the right side of the Rear Tray with the print side facing UP . (2) Pinch the Paper Guide and slide it against the left sid ...

  • Canon MX300 - page 21

    17 Copying Copying Making Copies This section describes the ba sic procedure to make copies. 1 T urn on the machine. See “T urning the Machine On and Off” on page 6. 2 Press the COPY button. 3 Load paper . See “Loading Printing Paper” on page 9. 4 Load the original on the Platen Glass. See “Loading Original Documents” on page 8. 5 S pec ...

  • Canon MX300 - page 22

    18 Copying  PA G E S I Z E Select the page size of the loaded paper . 8.5"x1 1" / A4 / B5 / A5 / 4"x6" / 5"x7" / CREDIT CARD SIZE  MEDIA TYPE Select the media type of the loaded paper . PLAIN P APER / PHOTO P APER PRO / PHOT O P APER PLUS / MA TTE PHOTO P APR / GLOSSY  INTENSITY Change the intensity . MANUAL A ...

  • Canon MX300 - page 23

    19 Copying Using Useful Copy Functions For details, refer to “Using Useful Copy Functions” in the User ’s Guid e on-screen manual. Reducing or En larging a Copy (ENLARGE/RED UCE) Copying Thick Originals Such as Bo oks (FRAME ERASE) Copying on Stickers (STICKER COPY) Copying w ithout Bord ers (BORDERLESS COPY) Repeating an Image on a Page (IMA ...

  • Canon MX300 - page 24

    20 Printing from Your Computer Printing from Y our Computer This section describes procedure for basic printing. Printing with Windows 1 T urn on the machine and loa d the paper in the machine. See “T urning the Machine On and Off” on page 6 and “Loading Printing Paper” on page 9. 2 Create a document or open a fi le to print using an approp ...

  • Canon MX300 - page 25

    21 Printing from Your Computer Printing with Macintosh 1 T urn on the machine and loa d the paper in the machine. See “T urning the Machine On and Off” on page 6 and “Loading Printing Paper” on page 9. 2 Create a document or open a fi le to print using an approp riate application software. 3 Select Page Setup on the application software’ ...

  • Canon MX300 - page 26

    22 Scanning Images Scanning Images Y ou can scan images from the machine to a com puter without printing them and save them in popular image types such as JPEG , TIFF , bitmaps, or PDF . If you are scanning printe d text, you can use the OCR (Optical Character Recognition) software to convert it to text data. Scanning Methods Y ou can select from t ...

  • Canon MX300 - page 27

    23 Printing Photographs Di rect ly from a Compliant Device Printing Photographs Directly from a Compliant Device Y ou can connect a PictBridge compliant device such as a digital camera, camcorder , or mobile phone using a USB cable recommended by the device’s manufacturer , and print recor ded images directly without using a computer . z Connect ...

  • Canon MX300 - page 28

    24 Printing Phot ographs Direc tl y from a Compliant Device 2 Connect the PictBridge compliant device to the machine. (1) Make sure that the PictBridge compliant device is turned off. (2) Connect the PictBridge compliant device to the machine using a USB cable recommended by the manufacturer of the device. The device turns on automatically . If you ...

  • Canon MX300 - page 29

    25 Printing Photographs Di rect ly from a Compliant Device About PictBridge Print Settings  Settings on a Pic tBridge Compliant Device This section describes the print settings on a PictBridge compliant device. When operating the device, be sure to follow the instruct ions giv en in the instruction manual of your PictBridge compliant devi ce. z ...

  • Canon MX300 - page 30

    26 Printing Phot ographs Direc tl y from a Compliant Device z Layout Setting V arious layout options are available. z Bordered/Borderless: Y ou can select whether or not to print an image with a border . z N-up: Y ou can use this option when printing on sticker paper , or A4- or L etter-sized paper . S ticker paper: When you select 10 x 15 cm/4&quo ...

  • Canon MX300 - page 31

    27 Printing Photographs Di rect ly from a Compliant Device  Setting on the Machine This section describes the PictBr idge print settings on the machine. Set the print settings to Default on the PictBrid ge compliant device when you want to prin t according to the settings on the machine. z Displaying the PictBridge Settings Scr een and Specif yi ...

  • Canon MX300 - page 32

    28 Faxing Faxing Prep aring the Machine for Fax T ypical examp les of connecting the machine are des cribed below . The machine cannot send/receive faxes if the connection is incorrect. Connect the machine correctly .  Methods of Connecting Exte rnal Devices z Connecting to an Analog Line (A) T elepho ne line (analog) z Connecting a T elephone o ...

  • Canon MX300 - page 33

    29 Faxing z Connecting a T elephone or Answe ring Machine via a Computer (A) Computer (B) T elephone or Answer ing machine Users in the UK If the connector of the external de vice cannot be connected to the jack on the machine, you w ill need to purchase a B.T . adapter to co nnect as follows: Connect the external device line to the B.T . adapt er ...

  • Canon MX300 - page 34

    30 Faxing  Methods of Connecting the V arious Lines The following are some basic connection scheme s that apply when you are connecting to a non- analog telephone line. These are examples and are not guaranteed to suit every connecting conditions. For details, refer to the instruction man ual supplied with t he network device (contro l devices s ...

  • Canon MX300 - page 35

    31 Faxing 4 Press the [ or ] button to select the telephone line type, then press the OK button. ROT AR Y PULSE: Suitable for pulse dialin g. TOUCH TONE: Suitable for tone dialing. 5 Press the Stop/Reset butto n. Note Y ou cannot use ROT ARY PULSE depending on the country or region of pur chase. ...

  • Canon MX300 - page 36

    32 Faxing Registering Sender Information A fax you receive may have information, such as the send er ’s name or the company name, the sender ’s phone or fax number , and the date and time of the transmissio n, printed in small type at the top of each page. Such sender information is called Transmit T erminal Identification, or TTI. Y ou can reg ...

  • Canon MX300 - page 37

    33 Faxing  Guidelin es for Enteri ng Number s, Letters, and Symbols The following characters are assigned to the Numeric buttons. * SP indicates a space. Follow the procedure below to enter letters and numbers when you regist er names and fax/ phone numbers for the sender information or a coded speed dial. 1 Press the button to switch to upperca ...

  • Canon MX300 - page 38

    34 Faxing  Entering the Date and T ime 1 Press the FA X button, then press the Menu b utton. 2 Press the [ or ] button to select USER SETTINGS , then press the OK button two times. 3 Press the Numeric buttons to enter the da te and time (in 24-hour forma t), then press the OK button. Enter only the last two digits of the year . 4 Press the Stop/ ...

  • Canon MX300 - page 39

    35 Faxing 5 Press the OK button. 6 Press the Numeric buttons to enter your name (max. 24 characters, inclu ding spaces), then press the OK button. 7 Press the Stop/Reset butto n.  Setting Daylight Saving T ime (Summer T ime) Some countries adopt the daylight saving time (summer time) system that shifts the clock time forward or back at certain p ...

  • Canon MX300 - page 40

    36 Faxing (2) Press the [ or ] button to select the month when summer time starts, then press the OK button two times. (3) Press the [ or ] button to select the week when summer time start s, then press the OK button two times. (4) Press the [ or ] button to select the day of the week when summer time starts, then press the OK button two times. (5) ...

  • Canon MX300 - page 41

    37 Faxing Registering the Destination  Registering Coded S peed Dialing Coded speed dialing allows you to dial fax/te lephone numbers by simply pressing a few buttons. T o dial the number , press the Coded Dial bu tton, enter the two-digit code assigned to that number . Before you can use coded speed dialin g, you need to register the recipient? ...

  • Canon MX300 - page 42

    38 Faxing 6 Press the Stop/Reset butto n.  Changing or Deleting a Regis tered Information z T o Change a Register ed Number or Name: 1 Follow the procedures from step 1 to 3 under “Registeri ng Coded S p eed Dialing” on pa ge 37. 2 Press and hold the [ button to delete the registered number . 3 Press the Numeric buttons to enter the ne w num ...

  • Canon MX300 - page 43

    39 Faxing 5 Press the [ or ] button to select the sorting way , then press the OK button. YES: Prints the list with the destination nam e (DESTINA TION ID) in alphabetical order . NO: Prints the list with the registered entries in numerical order . ...

  • Canon MX300 - page 44

    40 Faxing Sending Faxes  Flow of Sending Faxes The operation flow of sending faxes is as follow s. Step 1 Load the original to send on the Platen Glass. See “Loading Original Documents” on page 8. Step 2 Adjust the fax quality and scan contrast. See “Adjusting the Scan Contrast or the Image Qua lity (Fax Resolution)” on page 41. Step 3 D ...

  • Canon MX300 - page 45

    41 Faxing  Before Sending Faxes z Adjusting the Scan Contrast or th e Image Quality (Fax Resolu tion) z Adjusting the Sc an Contrast Contrast is the degree of difference between light and dark. Increasing the scan con trast setting further blackens dark areas and whit ens bright areas, w hereas decreasing the contrast setting reduces the differe ...

  • Canon MX300 - page 46

    42 Faxing  Sending Fax es This section describes methods of sending faxes and dialing functions of the machine. z Memory sending z Dialing the coded speed dial z Redialing z Sending Faxes (Memory Sending) 1 Prepare for faxing. (1) T urn on t he machi ne. (2) Load the original on the Platen Glass. (3) Press the FA X button. (4) Adjust fax setting ...

  • Canon MX300 - page 47

    43 Faxing z Dialing the Coded S peed Dial 1 Prepare for faxing. See “Prepare for faxing.” on page 42. 2 Press the Coded Dial button. 3 Press the Numeric buttons to enter the tw o-digit code (00 - 19) assigned to th e number you want to dial. 4 Press the Color button for color sendin g, or the Black button for black & white sending. z Redial ...

  • Canon MX300 - page 48

    44 Faxing Using Other Useful Sending Functions  Sending from Y our Computer (Windows Only) If the machine is connected to a computer , you can send faxe s using the fax driver from any application software that has a printing function. For details, refer to the F AX Driver Guide on- screen manual.  Sending/Receiving Using ECM This machine is ...

  • Canon MX300 - page 49

    45 Faxing Receiving Faxes  Flow of Receiving Faxes The operation flow of receiving faxes is as follows: Step 1 Select a receive mode. See “Selecting the Receive Mode” on page 45. Step 2 Load A4, Letter , or Legal-sized paper . See “Loading Paper” on page 12. Step 3 Confirm the paper settings and adjust them as needed. See “Changing the ...

  • Canon MX300 - page 50

    46 Faxing z If Y ou W ant to Receive Only Faxes Automatica lly with the Machine, o r Have a Dedicated T elephone Line for Fax Use Only: Select F AX ONL Y MODE. (A) Incoming call (B) Receives faxes automatically . z If Y ou Are Using a Single T elephone Line for Faxes a nd V oice Calls an d Use V oice Calls More Frequently: Select TEL PRIORITY MODE. ...

  • Canon MX300 - page 51

    47 Faxing z If Y ou Are Using a Single T elephone Line for Faxe s and V oice Calls an d W a nt to Receive Faxes Automati cally: Select F AX PRIORITY MODE. (A) Incoming call (B) V oice call: The ma chine will ri ng. Pick up the handset, then press the Stop/Reset button to answer the call. (C) Fax: The machine receives faxes a utomatically . Note z S ...

  • Canon MX300 - page 52

    48 Faxing z If Y ou Subscribe to a Distinct ive Ring Pattern Detection (DRPD) Service with Y our T elephone Comp any (US and Canada only) : Select DRPD. (A) Incoming call (B) V oice call: The t elephone will ring. Pick up the handse t to answer the call. (C) Fax: The fax is received automatically when the machine detects the registered fax ring pat ...

  • Canon MX300 - page 53

    49 Faxing  Setting the Receive Mode 1 Press the FA X button, then press the Menu b utton. 2 Press the OK button. 3 Press the [ or ] button to select the receive mode. 4 Press the OK button. The receive mode will be displayed on the bottom left of the LCD. (A) Receive mode FA X O N LY : T he receive mode is FA X O N LY M O D E . TEL 1ST : The rec ...

  • Canon MX300 - page 54

    50 Faxing  Changing th e Print Settings Load A4, Letter , or Legal-sized plain paper in the Rear Tray to print the fax. 1 Press the FA X button, then press the Settings button. 2 Press the [ or ] button to select the page size from A4 , 8.5" x 1 1" , or 8.5 x 14 . 3 Press the OK button. 4 Press the [ or ] button to select PLAIN P APER ...

  • Canon MX300 - page 55

    51 Faxing Using Other Useful Receiving Functions  Memory Receiving If the machine receives a fax under one of the foll owing conditions, the mach ine will not be able to print the received fax and will store it in its memory . “ RECEIVED IN MEMOR Y ” is displayed in fax mode. When the problem is resolved as descr ibed, the fax sto red in mem ...

  • Canon MX300 - page 56

    52 Faxing Document S tored in Memory  Printing a List of Docume nts in Memory The machine can print a list of documents stor ed in memory (the memory list) showing the transaction number (TX/RX NO.), transaction m ode, recipient, number of pages, date, and transmission time of each document. When printin g or deleting documents in memory , speci ...

  • Canon MX300 - page 57

    53 Faxing 4 Press the [ or ] button to select PRINT DOCUMENT or DELETE DOCUMENT . z If you select PRINT DOCUMENT : (1) Press the OK button. (2) Press the [ or ] button to select the transaction number (TX/RX NO.) of the document you want to print, or enter the number by pressing the N umeric buttons. If you are unsure of the transaction number , pr ...

  • Canon MX300 - page 58

    54 Faxing  Checking a Document’ s Details in Memory If the machine was not able to print a received fax when the machine is in one of the following situations, the fax is automatically stored in memor y . z If ink is low or has run out while receiving a fax z If the paper size/type setting is incorrect z If the paper run out while receiving a ...

  • Canon MX300 - page 59

    55 Faxing Summary of Report s and Lists The table below shows the reports and list s that can be printed from the machine. Refer to the pages indicated for more details.  Activity Re port Prints the history of sent and received faxes. The ma chine is factory-set to print an Activity report after every 20 transactions. Y ou can also disable autom ...

  • Canon MX300 - page 60

    56 Faxing  User ’ s Dat a List The User ’s data list enables you to confirm the cu rrent settings of the machine as well as the registered sender information. See “R egistering Sender Information” on page 32. z Printing the User ’ s Dat a List 1 Press the FA X button, then press the Menu b utton. 2 Press the [ or ] button to select PRN ...

  • Canon MX300 - page 61

    57 Routine Main tenance Routine Maintenance When Printing Becomes Fain t or Colors Are Incorrect When printing becomes faint or colors are incorre ct, the print head nozzles on FINE Cartridges are probably clogged. Print the nozzle check pattern to confirm the co ndition of the nozzles and then perform Print Head Cleaning. If print results are not ...

  • Canon MX300 - page 62

    58 Routine Maintenance Printing the Nozzle Check Pattern Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzles. 1 Make sure that the machine is turned on, then load a sheet o f A4 or Letter-sized plain paper in the Rear Tray . 2 Open the Paper Output Tray , then set the Pape r Thickness Lever . (1) ...

  • Canon MX300 - page 63

    59 Routine Main tenance Examining the Nozzle Check Pattern Examine the nozzle check pattern, and perform cleaning if necessary . 1 Check the nozzle check pattern you printed. (1) If lines of this pattern are missing, the print head nozzles need cleaning. Example: When lines are missing (Black ink) (2) If these patterns have white streaks, the print ...

  • Canon MX300 - page 64

    60 Routine Maintenance Print Head Cleaning Clean the Print Head if lines are missing or if white streaks appear in the printed nozzle check pattern. Cleaning unclogs the nozzle s and restores the print head condition. Note that cleaning the Print Head causes used ink to be absorbed in t he ink absor ber . Cleaning the Print Head consume s ink, so p ...

  • Canon MX300 - page 65

    61 Routine Main tenance Print Head Deep Cleaning If print quality does not impr ove by standard Print Head Cleaning, try Print Head Deep Cleaning, which is a more powerful process. Note that cl eaning the Print Head causes used ink to be absorbed in the ink absorber . Print Head Deep Cleaning consumes more ink tha n standard Print Head Cleaning, so ...

  • Canon MX300 - page 66

    62 Routine Maintenance Aligning the Print Head If ruled lines are printed misaligned or print result s are otherwise unsatisfactory , adjust the print head position. 1 Make sure that the machine is turned on, th en load two sheets of A4 or Letter-sized plain paper in the Rear Tray . 2 Open the Paper Output Tray , then set the Paper T hickness Lever ...

  • Canon MX300 - page 67

    63 Routine Main tenance (2) Repeat the procedure until you finish inputting the pattern number for column L. (3) Confirm the displayed message and press the OK button. The second pattern is printed. (4) Check the printed patterns and press the [ or ] button to select the numb er of the pattern in column M that has the least noticeable streaks, then ...

  • Canon MX300 - page 68

    64 Routine Maintenance Replacing a FINE Cartridge This section explains the way to confirm the ink status and the procedure to replace FINE Cartridges. When ink runs out or other errors occur , an error message is displayed on the LCD t o inform you of the error . See “An Error Message Is Displayed on the LCD” on page 76 and confirm how to hand ...

  • Canon MX300 - page 69

    65 Routine Main tenance z With the Computer Scr een Y ou can confirm the status of each FINE Cartri dge on the printer status monitor (Windows) and Canon IJ Printer Utility (Macintosh). (A) Confirm whether any sy mbols are displayed here. The function for detecting the remaining ink level is disabled. The statuses of a Color and Black FINE Cartridg ...

  • Canon MX300 - page 70

    66 Routine Maintenance Follow the procedure below to open each of th e confirmation screens. 1 Open the printe r properties dialog box. Refer to “Opening the Printer Propert ies Dialog Box Directly from Cont rol Panel” in “Opening the Printer Properties Dialog Box (Windows)” of the User ’s Guide on-screen manual. 2 Click Vi ew Printer S t ...

  • Canon MX300 - page 71

    67 Routine Main tenance  Replacing FINE Ca rtridges When FINE Cartridges run out of ink, re place them using the followin g steps. 1 Make sure tha t the machine is turne d on, lift the Scanning Uni t (Printer Cover) with bot h hands, then pull th e Scanning Unit Support (A) down into place. The FINE Cartridge Holder moves to the left. Import ant ...

  • Canon MX300 - page 72

    68 Routine Maintenance 2 Remove the empty FINE Cartridge. (1) Push down the FINE Cartridge. (2) Remove the FINE Cartridge. 3 Prepare the replacem ent FINE cartridge. (1) Unpack a new FINE Cartridge and remove the orange protective tape (A) gently . Caution z Do not hold th e FINE Cartridge Ho lder to stop o r move it. z Do not touch t he metallic p ...

  • Canon MX300 - page 73

    69 Routine Main tenance 4 Install the FINE Cartridge. (1) Insert a new FINE Cartridge all the way into the appropriate slot. The Black FINE Cartridge should be installed into the left slot ( ) and the Color FIN E Cartridge should be into the right slot ( ). (2) Push up the FINE Cartridge until it clicks into place. 5 Lift the Scanning Unit (Printer ...

  • Canon MX300 - page 74

    70 Routine Maintenance Keeping the Best Printing Result s T o avoid drying of the Print Head and cl ogging of the nozzles, note the following.  When Y ou T urn Off the Machine Follow the procedure below to turn o ff the machine. (1) Press the ON/OFF button to turn off the machine. (2) Confirm that the Power lamp has gone out. This takes a few se ...

  • Canon MX300 - page 75

    71 Routine Main tenance Cleaning Y our Machine This section describes the cleaning procedure that is needed to maintain your machine.  Cleaning the Exterior of the Machine Be sure to use a soft cloth such as eyeglas ses cleaning cloth and wipe off dirt on the surface with it gently . Smooth out wrinkles on the cloth if necessary before cleanin g ...

  • Canon MX300 - page 76

    72 Routine Maintenance  Cleaning the Paper Feed Roller ( Roller Cleaning) Clean the paper feed roller if paper is not fed pr operly . Cleaning the paper feed roller will wear the roller , so perform this only when necessary . 1 Make sure that the machine is turned on, and then remove an y paper from the Rear T ray . 2 Open the Paper Outpu t T ra ...

  • Canon MX300 - page 77

    73 Routine Main tenance  Cleaning the Inside of the M achine (Bot tom Plate Cleaning) This section describes how to clean the inside of the machine. If th e inside of the machine becomes dirty , printed paper may get dirty , so we recommend performing cleaning regula rly . 1 Make sure that the machine is turned on, and then remove any paper fro ...

  • Canon MX300 - page 78

    74 Routine Maintenance  Cleaning the Protrusions In side the Machine If protrusions inside the machine are stained, wipe off any ink from the protrusions using a cotton swab or the like. Caution Be sure to turn off the power and dis connect the po wer cord befor e cleaning the mac hine. ...

  • Canon MX300 - page 79

    75 Troubleshooting T roubleshooting This section describes troubleshooting tips for problems you ma y encounter when using the machine. z “An Error Message Is Displayed on the LCD” on page 76 z “LCD Cannot Be Seen At All” on page 78 z “An Unintended Language Is Displayed on the LCD” on page 79 z “Cannot Install the MP Drivers” on pa ...

  • Canon MX300 - page 80

    76 Troubleshooting An Error Message Is Displayed on the LCD If an error message is displayed on the LCD, take the corresponding action described below. Message Action CHECK INK U051/U052/U053/U059 The FINE Cartridge may not be installed properly , or the Cartridge m ay not be compatible with this machine. Open the Scanning Unit (Printer Cover) and ...

  • Canon MX300 - page 81

    77 Troubleshooting  Fax Related Mes sages CHECK PRINTER Turn of f the machine, and unplug the power cord of the machine from the power supply . After a while, plug the power cord of the machine back in, and then turn on the machine. If the same error occurs, contact your Canon service representative. SCANNER ERROR Make sure that the protective m ...

  • Canon MX300 - page 82

    78 Troubleshooting LCD Cannot Be Seen At All NO RX P APER The other party’s fax machine is out of paper or its memory is full. Contact the other party and have them load paper in their fax machine or free up space in their fax machine’s memory . NO TEL NUMBER The coded speed dialing code you entered has not been registe red. Register the coded ...

  • Canon MX300 - page 83

    79 Troubleshooting An Unintended Language Is Displayed on the LCD Cause Action The language you want to be displayed is not selected. Select the language according to the following procedure. (1) Press the ON/OFF button to turn on the machine. (2) Press the Menu button three times. (3) Press the ] button twice, then press the OK button. (4) Press t ...

  • Canon MX300 - page 84

    80 Troubleshooting Cannot Inst all the MP Drivers Cause Action Unable to proceed beyond the Printer Connection screen. If you were unable to proceed beyond the Printer Connection screen, f ollow the procedure below to reinstall the MP Drivers. (1) Click Cancel on the Printer Connection screen. (2) Click Start Over on the Inst allation Failure scree ...

  • Canon MX300 - page 85

    81 Troubleshooting Cannot Connect to Computer Properly  Printing Speed Is Slow / USB 2.0 Hi-S peed Connection Does Not Work  “This device can perform fast er” Message Is Displayed Installation procedure not followed correctly . Follow the procedure described in your setup sheet for proper installation. If the MP Drivers were not installed ...

  • Canon MX300 - page 86

    82 Troubleshooting Print Result s Not Satisfactory If the print result is not satisfactory , confirm the paper and print quality settings first. z Do the p age size and media type settings match the size and type of th e loaded p aper? When these settings are incorrect, you cannot obtain a proper print result. If you are printing a photograph or an ...

  • Canon MX300 - page 87

    83 Troubleshooting  Printing Does Not S tart /Printing Is Blurred/Colors Are W rong/St raight Lines Are Misaligned  White Str eaks Cause Action FINE Cartridge is not installed properly . / There is no ink left. Remove the FINE Cartridge, then reinstall it. Small dusts may be stuck between the contact points. In this case, the print result may ...

  • Canon MX300 - page 88

    84 Troubleshooting  Printed Paper Curls or Has Ink Blot s  Printed Surface Is Scratched/Paper Is Smudge d Cause Action Paper is too thin. When printing data with high color saturation such as photographs or imag es in deep color , we recommend using Photo Paper Pro or other Canon sp ecialty paper . See “Media Types Y ou Cannot Use” on pag ...

  • Canon MX300 - page 89

    85 Troubleshooting Paper is curled. For Plain Paper Turn the p aper over and reload it to print on the other side. Leaving the paper loaded in the Rear Tray for a long time may cause the paper to curl. If this happens, load the paper with the other side facing up. It may resolve the problem. We recommend putting unused paper back into the package a ...

  • Canon MX300 - page 90

    86 Troubleshooting  Colors Are Uneven or Str eaked The Print Result Not Sa tisfactory When Copying If these do not resolve the problem, also see “Print Results Not Satisfactory” on page 82. Printing Does Not St art Cause Action Print Head nozzles are clogged. See “When Printing Becomes Faint or Colors Are Incorrect” on page 57 and perfor ...

  • Canon MX300 - page 91

    87 Troubleshooting Paper Does Not Feed Properly The machine is not ready . Check if the Power lamp is lit green. If the Power lamp is off, turn the machine on. While the Power lamp is flashing green, the machine is initializing. Wait until the Power lamp stops flashing and remains lit green. Note When printing large data such as a photo or graphics ...

  • Canon MX300 - page 92

    88 Troubleshooting Paper Jams Cause Action Paper jammed in the Paper Output Slot or the Rear Tray . Remove the paper following the procedure below. (1) Slowly pull the paper out, either from the Rear T ray or from the Paper Output Slot, whichever is easier . z If the paper tears and a piece remains inside the machine, turn the machine off, open the ...

  • Canon MX300 - page 93

    89 Troubleshooting Error Message Appears on the Computer Screen  Writing Error/Output E rror/Communication Error Cause Action The machine is not ready . Confirm that the Power lamp is lit green. If the Power lamp is off, turn the machine on. While the Power lamp is flashing green, the machine is initializing. Wait until the Power lamp stops flas ...

  • Canon MX300 - page 94

    90 Troubleshooting  Error No.: 300 Is Displayed  Error No.: 1700/1710 Is Displayed  Error No.: 2001 Is Displayed Cause Action The machine is not ready . Confirm that the Power lamp is lit green. If the Power lamp is off, turn the machine on. While the Power lamp is flashing green, the machine is initializing. Wait until the Power lamp stop ...

  • Canon MX300 - page 95

    91 Troubleshooting  Error No.: 2002 Is Displayed Error Message Appears on a PictBridge Compliant Device The following are the possible errors that may occur when print ing directly from a PictBridge compliant device and the countermeasures to clear them. Cause Action PictBridge compliant device is connected via a USB hub. See “UNSUPPORTED USB ...

  • Canon MX300 - page 96

    92 Troubleshooting Scanning Problems  ScanGear W on’t St art  Other Scanning T roubles Refer to the Scanning Guide on-screen manual. Problems Receiving Faxes  Cannot Receive a Fax, Cannot Print a Fax “No ink”/ “Ink cassette error” z The FINE Cartridge has or may have run out of ink. z The FINE Cartridge may not be installed prope ...

  • Canon MX300 - page 97

    93 Troubleshooting * Legal may not be available depending on t he country or r egion of purchase.  Machine Does Not Switch Automatically bet ween V oice and Fax Calls *1 This setting is only available in US and Canada. *2 This setting may not be available depending on the country or region of purchase.  Quality of Received Fa x is Poor A pape ...

  • Canon MX300 - page 98

    94 Troubleshooting  Repeated Errors Occur When Y ou Receive a Fax Problems Sending Faxes  Cannot Send a F ax Cause Action The telephone line condition or the connection is poor . Reduce the reception start speed. Refer to “RX ST ART SPEED” in “FAX SETTINGS” of the User ’s Guide on-screen manual. If there is a poor line or connection ...

  • Canon MX300 - page 99

    95 Troubleshooting  Cannot Send a F ax Clearly  Repeated Errors Occur When Y ou Send a Fax T elephone Problems  Cannot Dial  T elepho ne Disconnect s During a Call Cause Action The document is not loaded correctly , or the Platen Glass or the inner side of the Document Cover is dirty . z Remove the document, then reload it on the Platen ...

  • Canon MX300 - page 100

    96 Appendix Appendix How to Use the Document ation Provided Printed Documentatio n Setup Sheet Be sure to read this sheet first. This sheet includes instructions for se tting up your machine and getting it ready for use. Quick St art Guide (This guide) Read this guide when starting to use the mach ine. After following instructions in your setup she ...

  • Canon MX300 - page 101

    97 Appendix Reading the On-screen Manuals For detailed instructions on installing the on-screen manuals, refer to your setup sheet. Y ou can view the on-screen manuals in the following way: T o view the on-screen manual, doub le-click the XXX On-screen Manual shortcut icon on the desktop, or click Start > All Programs (or Programs ) > Canon X ...

  • Canon MX300 - page 102

    98 Appendix S pecifications General Specifications Printing resolution (dpi) 4800 (horizontal)* x 1200 (vertical) * Ink droplets can be placed with a pitch of 1/4800 inch at minimum. Interface USB 2.0 High S peed* * A computer that complies with USB 2.0 Hi-Speed st andard is required. Since the USB 2.0 Hi-Speed interface is fully upwardly compatibl ...

  • Canon MX300 - page 103

    99 Appendix Fax Specifications Applicable line Public Switched T elephone Network (PSTN) Compatibility G3 / Super G3 (Mono & Color Fax) Data compressing system MH, MR, MMR, JPEG Modem type Fax modem Modem speed 33600 / 31200 / 28800 / 26400 / 24000 / 21600 / 19 200 / 16800 / 14400 / 12000 / 9600 / 7200 / 4800 / 2400 bps Automatic fallback T ran ...

  • Canon MX300 - page 104

    100 Appendix Camera Direct Print (PictBridge) Paper size 4" x 6" / 101.6 x 152.4 mm, 5" x 7" / 127 .0 x 177.8 mm*, Credit card, 8" x 10" / 203.2 x 254.0 mm, A4, Letter , Wide* * Can be selected only on certain Canon-brand PictBridge compliant devices. Paper type Default (Selections based on the machine setting), Photo ...

  • Canon MX300 - page 105

    101 Appendix z OmniPage SE: Windows 2000 Professi onal SP2 and SP3 not su pported z MP Navigator EX: QuickTime v6.4 or later is needed (Macintosh only) z Some functions may not be available with Windows Media Center z T o upgrade from Windows XP to Windows Vista, first uninstall sof tware bundled with the Canon inkjet printer . S pecifications are ...

  • Canon MX300 - page 106

    102 Safety Precautions Safety Precautions Please read the safety warnings and cautions prov ided in this manual to ensure that you use the machine safely . Do not attempt to use the mach ine in any way not described in th is manual. Wa r n i n g z This produ ct emits low level magnetic flux. If you use a ca rdiac pacemake r and feel abnormali ties, ...

  • Canon MX300 - page 107

    103 Safety Precautions Cleaning the machine Use a damp cloth to clean the machine. Never use flammable solvents such as alcohol, benzene or thinners. If flammable solvents come in contact with electrical components inside the machine, it could cause a fire or electric shock. Always unplug the machine from the power outlet before cleaning the machin ...

  • Canon MX300 - page 108

    104 Safety Precautions Working around the machine Never put your hands or fingers in the machine while it is printing. When moving the machine, carry the machine at both ends. Do not place any object on the machine. Do not place metal objects (paper clip s, staples, etc.) or containers of flammable solvents (alcohol, thinners, etc.) on top of the m ...

  • Canon MX300 - page 109

    105 Safety Precautions Legal Limit ations on Use of Y our Product and Use of Images It may be unlawful to make copies of, scan, print, or use reproductions of the following documents. The list provided is non-exhau stive. When in doub t, check with a legal repr esentative in your jurisdiction. z Paper money z Money orders z Certif icates of deposit ...

  • Canon MX300 - page 110

    106 Safety Precautions Users in the U.S.A.  Pre-Inst allation Requirement s for MX300 Order Information When ordering service from the telephone compan y for this equipment, the following may be required. Universal Service Order Code (USOC): RJ1 1C The Facility Interface Code (FIC): 02LS2 Service Order Code (SOC): 9.0F  Connection of the Equi ...

  • Canon MX300 - page 111

    107 Safety Precautions Wa r n i n g The T elephone Co nsumer Protec tion Act of 19 91 makes it unla wful for an y person to u se a computer o r other electr onic device t o send any message via a telephone FAX machine unless such mess age clearly contains in a marg in at the top o r bottom of eac h transmit ted page, or on the first page of the tra ...

  • Canon MX300 - page 112

    108 Safety Precautions refurbished Product, as determined by the Canon USA repair facility or the ASF . W ar ranty repair or replacement shall not extend the original warrant y period of the Product. A dated proof of purchase is required at the time of warranty ser vice. A copy of your dated bill of sale will satisfy this requirement. This warranty ...

  • Canon MX300 - page 113

    109 Safety Precautions PROPERTY AND T O OTHERS AND THEIR PROPERTY ARISING OUT OF THE POSSESSION, USE, MISUSE, OR INABILITY TO USE THE PRODUCT SOLD BY CANON USA NOT CAUSED SOLEL Y AND DIRECTL Y BY THE NEGLIGENCE OF CANON USA, OR ITS ASF . (SOME ST A TES DO NOT ALLOW THE EXCLUSION OR LIMIT A TI ON OF INCIDENT AL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE ...

  • Canon MX300 - page 114

    110 Safety Precautions * Support program specifics are s ubject to change without notice . ** InstantExchange warranty service is su bject to th e availability of refurb ished or new replacement units. Canon U.S.A., Inc. One Canon Pla za Lake Success, NY 1 1 042 USA Canon is a registered trademark of Canon Inc. ©2007 Canon U.S.A., Inc. Canon is a ...

  • Canon MX300 - page 115

    111 Safety Precautions Users in Canada  Pre-Inst allation Requirement s for Canon Facsimile Equipment Notice This equipment meets the applicable Indu stry Canada technical specifications. The Ringer Equivalence Number is an indication o f the maximum number of devices allo wed to be connected to a telephone interface. The terminati on on an inte ...

  • Canon MX300 - page 116

    112 Safety Precautions Users in New Zealand The grant of a T elepermit for any item of term inal equipment indicates only that T elecom has accepted that the item complies with minimum conditions for connection to its network. It indicates no endorsement of the product by T elecom, nor does it pr ovide any sort of warranty . Above all, it provides ...

  • Canon MX300 - page 117

    113 Index Index A Appendix 96 B Before Using the Machine 2 C Canon U.S. A., Inc. Limit ed Warranty - U.S. Only 107 Cleaning exterior 71 inside 73 platen glas s and document co ver 71 protrusion s inside the machi ne 74 roller 72 Copying 17 E Error Message 76 F Faxing preparing 28 receivin g 45 sending 40 H Handling Or iginal Documents 8 L Legal Lim ...

  • Canon MX300 - page 118

    114 ...

  • Canon MX300 - page 119

    Ordering Information For additional supplies, use the foll owing descriptions and order number s. Description Order # FINE Cartridges PG-30 Black 1899B002 CL-31 Color 1900B002 PG-40 Black 0615B002 CL-41 Color 0617B002 PG-50 Black 0616B002 CL-51 Color 0618B002 Canon S pecialty Papers All Occasion Photo Cards (4" x 8"/ 50 sheets) 1029A069 G ...

  • Canon MX300 - page 120

    QT51346V01 series Quick St art Guide QT5-1346-V01 XXXXXXXX © CANON INC. 2007 PRINTED IN THAILAND The following FINE Cartridges are compatible with this product. For information on product specificat ions, please visit our website at www .usa.canon.com Quick S t art Guide Office All-In-One series ...

Manufacturer Canon Category All in One Printer

Documents that we receive from a manufacturer of a Canon MX300 can be divided into several groups. They are, among others:
- Canon technical drawings
- MX300 manuals
- Canon product data sheets
- information booklets
- or energy labels Canon MX300
All of them are important, but the most important information from the point of view of use of the device are in the user manual Canon MX300.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Canon MX300, service manual, brief instructions and user manuals Canon MX300. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Canon MX300.

Similar manuals

A complete manual for the device Canon MX300, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Canon MX300 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Canon MX300.

A complete Canon manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Canon MX300 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Canon MX300, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Canon MX300, that we can find in the current document
3. Tips how to use the basic functions of the device Canon MX300 - which should help us in our first steps of using Canon MX300
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Canon MX300
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Canon MX300 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Canon MX300?

Use the form below

If you did not solve your problem by using a manual Canon MX300, ask a question using the form below. If a user had a similar problem with Canon MX300 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)