Manual Ariens 911413

30 pages 4.21 mb
Download

Go to site of 30

Summary
  • Ariens 911413 - page 1

    Owner/Operat or Manual Manuel du Propriétai re/Utilisateur Model 91 1413 – W A W 34 (Serial No. 013000 and up) Wide Area W alk Mower 04081400B 4/12 Printed in USA ENGLIS H FRENCH Gasoline containing up to 10% ethanol (E10) or up to 10% MTBE (methyl tertiary butyl ether) is acceptable for use in this machine. The use of any gasoline exceeding 10% ...

  • Ariens 911413 - page 2

    GB - 2 Safet y . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Assembly . . . . . . . . . . . . . . . . . . . . . . . 10 Controls and Feature s . . . . . . . . . . . . . 1 2 Opera tion . . . . . . . . . . . . . . . . . . . . . . . 1 3 Mainte nance . . . . . . . . . . . . . . . . . . . . . 17 Service and Adjustment s . . . . . . . . . . 20 S ...

  • Ariens 911413 - page 3

    GB - 3 • Record Unit Model and Serial numbers here: • Record Engine Model & Serial numbers here: PRODUCT REGISTRA TION The Ariens d ealer must register the product at the time of purchase. Registering the product will help the comp any process warranty claims or contact you with the latest service information. All c laims meeting requiremen ...

  • Ariens 911413 - page 4

    GB - 4 SAFETY ALERTS Look for these symbols to point out important safety precautions. They mean: Attention! Personal Safety Is Invo lved! Become Al ert! Obey T he Messag e! The safety alert symbols above an d signal words below are used on decals and in this manual. Read and understand all safety messages. NOT A TIONS NOTE: General referenc e info ...

  • Ariens 911413 - page 5

    GB - 5 SAFETY DECALS AND LOCA TIONS AL WA YS replace missing or damaged safety decals. Refer to Figure 2 for safety decal locations. KEEP HANDS and FEET A W A Y 02988100 07800404 05365900 + 1 Figure 2 1 2 3 4 1 2 1. DANGER! DANGER! Read and understand the operator ’ s manual bef ore operating unit. 1.1 Dis memberm ent Haza rd T o avoid dismemberm ...

  • Ariens 911413 - page 6

    GB - 6 1.2 Dis charge H azard Discharge Hazard – NEVER direc t discharge toward people, pets or property . T hrown objects can cause injury or damage. Keep children and others away from unit while unit is in operation. Do not operate mower unless guards are in operating position or entire bagger is attached. 1.3 T ipping Ha zard SERIOUS I NJURY O ...

  • Ariens 911413 - page 7

    GB - 7 EMISSION CONTROL SYST EM This equipment and/or its engine may include exhaust and evaporat ive emissions control system components required to meet U.S. Environmental Protection Agenc y (EP A) and/or California Air Resources Board (CARB) regulations. T ampering with emission controls and components by unauthorized personnel may result in sev ...

  • Ariens 911413 - page 8

    GB - 8 NEVER allow children to use or service mower . AL WA YS keep hands and feet away from rotating part s. Rotating parts can cut off body part s. AL WA YS keep hands away from pinch points. Fumes from engine exhaust can cause death or serious injury . DO NOT run engine in an enclosed area. AL WA YS protect eyes, face, and body with adequate saf ...

  • Ariens 911413 - page 9

    GB - 9 • NO Smoking! • NO S parks! • NO Flames! • Allow engine to cool befo re filling fuel tank. Properly remove fuel before tipping unit . Never fill containers inside a vehicle or on a truck or trailer bed with a plastic liner . Always place containers on the gr ound away from your vehicle before filling. When practical, remov e gas-powe ...

  • Ariens 911413 - page 10

    GB - 10 CARTON CONTENTS ASSEMB L Y 1. Remove all packing materials and straps from unit. 2. Remove lower pair of nut s and bolts from the handlebars. 3. Rotate t he handlebar into the operating position. 4. Replace the nut s removed in step 2 and then tighten. 5. Rotate emission component s helf to horizontal position. T ighten upper handlebar bolt ...

  • Ariens 911413 - page 11

    GB - 11 6. Check engine crankcase oil level. S ee engine manual. 7. Connect the battery ground cable (–) to the negative battery terminal. 8. Fill fuel t ank. DO NOT OVERFILL! (See FILLIN G THE FUEL T A NK on page 15). NOTE: After the first twent y-five hours of operation, belt wear m ay require the PTO clutch cable and the drive control c ables ...

  • Ariens 911413 - page 12

    GB - 12 1. PTO Clutch Lever 2. P arking Brake Release Lever 3. Forwa rd Drive Control 4. R everse Drive Cont rol 5. Handlebars 6. Fuel T ank and Cap 7. Height Adjustment S pacers 8. Muffler 9. Oil Fill/Dipstick 10. Air Filter 1 1. Fuel Filter 12. Belt Cov er 13. Ignition Key 14. Safety S tart Switch 15. Throttle/Choke Control CONTROLS AND FEA TURES ...

  • Ariens 911413 - page 13

    GB - 13 CONTROLS AND FEA TURES See Figure 6 for locations. Park ing Br ake L ever ( Rig ht Han d Lever) Hold the parking brake l ever against the handlebar to release the wheel lock pin and operate the unit. Release the parking brake lever to engage wheel lock pin and pr event the unit from rolling forward or backward. IMPORT ANT : The wheel lock p ...

  • Ariens 911413 - page 14

    GB - 14 Align the open ends of the spacers with the flats on the caster s pindle and remove t he spacers one at a time until enough are left at the bottom for the desired cutting height. Remove the lock pin while supporting the caster arm. Lower the arm on top of the remaining spacers. Put the spacers that were removed in the caster spindle above t ...

  • Ariens 911413 - page 15

    GB - 15 Forward Drive Control (Lower Right Hand Control) NOTE: Engine must be running for wheel drive to propel unit. T o drive forward: Hold the parking brake l ever against the handlebar and slowly sq ueeze and hold the forward drive contro l. Hold the forward drive control against the handlebar for f astest speed. T o sto p: Release forward dr i ...

  • Ariens 911413 - page 16

    GB - 16 GASOLINE IMPORT ANT : AL WA YS use gasoline that meets the following guidel ines: • Clean, fresh gasoline. • A minimum o f 87 octane/87 AKI (91 RON). High altitude use may require a diff erent octane. Consult your engine manual. • Gasoline with up to 10% et hanol (gasohol) or up t o 10% MTBE (methyl tertiary butyl ether) is acceptable ...

  • Ariens 911413 - page 17

    GB - 17 Ariens Dealers will provide any service, parts or adjustments which may be required to keep your unit operating at peak ef ficiency . Should engine require se rvice, contact an Ariens Dealer or an authorized engine manufacturer's service center. MAINTENANC E SCHEDULE NOTE: Some work ing conditions (heavy loads, high ambient t e mperatu ...

  • Ariens 911413 - page 18

    GB - 18 T o install blade: 1. Install mower b lades on mower dec k with mounting hardwa re. 2. T orque 5/8-inch nut to 92 to 130 lbf-ft (125 to 176 N•m ). 3. C onnect spark plug wire. Sharpen the Mower Blades 1. R emove mower blade from unit. Discard mower blade if: • More than 1/2 in. (1.27 cm) of metal is removed. • Air lift s become eroded ...

  • Ariens 911413 - page 19

    GB - 19 CHECK DRIVE BEL T S Check drive belts and replace if worn or damaged. See Wheel Drive Belts on page 21. CHECK F A STENERS Check all fasteners for proper tightnes s. Pay special attention to blade hardware and all guards, shields and safety devices. CHECK AIR CLEANE R See engine manual f or specific informa tion. CHANGE ENGINE OIL IMPORT ANT ...

  • Ariens 911413 - page 20

    GB - 20 PTO CLUTCH 1. T est the PTO clutch adjustme nt. With the clutch disengaged, the blade brake pad should touch the upper pulley . With the clutch engaged, the blade brake pad should not touch the upper pulley and the deck belt should be under tension. 2. Loosen the lock nut on the cable adjuster under the dash panel. 3. Turn the adjuster body ...

  • Ariens 911413 - page 21

    GB - 21 BELT REPLACEM ENT Wheel Drive Belt s 1. St op engine, remove key , wait for all moving parts to stop and hot p arts to cool. 2. Raise and support the rear of the unit. 3. R emove the rear cover and disc onnect the neutral return springs from the spring anchors. 4. Remove the idler arm f rom the transmission plate. S ee Figure 15. 5. R emove ...

  • Ariens 911413 - page 22

    GB - 22 PTO Belt 1. St op engine, remove key , wait for all moving parts to stop and hot p arts to cool. 2. R emove the two dr ive belts from engine pulley . See Wheel Drive Belts on page 21. 3. R emove the belt cov er from the d eck. 4. D isconnect the t wo idler springs from the spring anchors. NOTE: Do not remov e the bolt holding the engine pul ...

  • Ariens 911413 - page 23

    GB - 23 SERVICING TH E BA TTERY NOTE: Unit comes equipped with a maintenance-free battery that requires no regular maintenance except cleaning the terminals. NOTE: Unit may be equipped with a U1 style battery and cover or a sealed glass mat battery with boot terminal. U1 Battery Removal and Ins tall ation (Figure 18) Remove 1. R emove the battery c ...

  • Ariens 911413 - page 24

    GB - 24 Sealed G lass Mat Ba ttery Remov al and Inst allation (Figure 19) NOTE: If same size replacement battery is not available a U1-s ize battery can be installed (see Figure 21). Remove 1. Disconnect negative (–) cable first, then positive (+) cable. 2. R emove battery from unit. Inst all 1. Install battery ont o unit. 2. C onnect positive (+ ...

  • Ariens 911413 - page 25

    GB - 25 Cleaning Battery a nd Battery Cables (Figure 18 or Figure 19) 1. R emove the battery c over (if equipped). 2. Disconnect negative (–) cable first, then positive (+) cable. 3. Clean battery cable ends, negative (–) t erminal, and posit ive (+) t erminal with a wire brush and rinse with a weak baking soda solution. 4. C onnect positive (+ ...

  • Ariens 911413 - page 26

    GB - 26 IMPORT ANT : NEVER spray unit with high- pressure water or store unit outdoors. S tor e mower in a coo l, dry , protected loc ation. Cleaning NOTE: Allow unit to c ool before cleaning. Clean unit thoroughly with mild soap and low pressure water . Brush off dirt and debris from all surfaces. T ouch up all scratched surfaces to prevent rust. ...

  • Ariens 911413 - page 27

    GB - 27 Cut is poor 1. Deck is clogged with grass. 2. Blades are dull. 3. Cutting wet grass. 4. Cutting too low . 5. PTO belt is slipping. 1. Clean the deck cutting chamber . 2. Sharpen o r replace blades. 3. Wait for grass to dry . 4. Raise cutting height and cut grass in two or more passes. 5. Adjust or replace PTO belt. Gras s does not disperse ...

  • Ariens 911413 - page 28

    GB - 28 SPECIFICA TIONS Model Number 91 1413 Description WA W 34 Length – in. (c m) 68.5 (174) Height – in. (cm) 38 (96.5) Width – in. (cm) 36 (91.4) Actual Weight – lbs (k g) 276 (125.2) Cutting Width – in. (cm) 34 (86.3) Cutting Height – in. (cm) 1.75 – 3.5 (4.4 – 8. 9) Engine, 4 cycle Briggs & Stratton Model I/C Governed RPM ...

  • Ariens 911413 - page 29

    Consumer _2012_Rev .A 29 Consumer Mow ing Equip ment Limited W arranty Ariens C ompany (Arie ns) warran ts to the ori ginal pu rchaser that A riens, Grav ely and C ountax brand lawn and garden cons umer products purchased o n or after 1/1/2012 will be fr ee from defects in material an d workma nship for th e time per iod noted in the chart below. E ...

  • Ariens 911413 - page 30

    Consumer _2012_Rev .A 30 • Promp tly notify Arie ns or an auth orized Arie ns, Gravely or Countax servi ce represen tative of the nee d for warranty service. • Transport the product to and from the place o f warranty service a t owner's exp ense. • Have the warranty service performed by an authorized Ariens, Gravely or Countax service re ...

Manufacturer Ariens Category Lawn Mower

Documents that we receive from a manufacturer of a Ariens 911413 can be divided into several groups. They are, among others:
- Ariens technical drawings
- 911413 manuals
- Ariens product data sheets
- information booklets
- or energy labels Ariens 911413
All of them are important, but the most important information from the point of view of use of the device are in the user manual Ariens 911413.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Ariens 911413, service manual, brief instructions and user manuals Ariens 911413. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Ariens 911413.

A complete manual for the device Ariens 911413, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Ariens 911413 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Ariens 911413.

A complete Ariens manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Ariens 911413 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Ariens 911413, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Ariens 911413, that we can find in the current document
3. Tips how to use the basic functions of the device Ariens 911413 - which should help us in our first steps of using Ariens 911413
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Ariens 911413
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Ariens 911413 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Ariens 911413?

Use the form below

If you did not solve your problem by using a manual Ariens 911413, ask a question using the form below. If a user had a similar problem with Ariens 911413 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)