English dropdown-ico

Manual Elitegroup P55H-CM

64 pages Not applicable
Download

Go to site of 64

Summary
  • Elitegroup P55H-CM - page 1

    Preface Preface Copyright This publication, including all photographs, illustrations and software, is protected under international copyright laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may be reproduced without written consent of the author . V ersion 1.0 Disclaimer The information in this documen ...

  • Elitegroup P55H-CM - page 2

    ii Preface Declaration of Conformity This device complies with part 15 of the FCC rules. Operation is subject to the following conditions: • This device may not cause harmful interference, and • This device must accept any interference received, including interfer- ence that may cause undesired operation Canadian Department of Communications Th ...

  • Elitegroup P55H-CM - page 3

    iii Chapter 2 7 7 7 7 7 Installing the Motherboard 7 Safety Precautions............................................................................7 Choosing a Computer Case.............................................................7 Installing the Motherboard in a Case............................................7 Checking Jumper Settings........ ...

  • Elitegroup P55H-CM - page 4

    iv PC Health Status...................................................................39 Fr equency/V oltage Contr ol....................................................42 Load Default Settings............................................................43 Supervisor Password............................................................43 User Passwor ...

  • Elitegroup P55H-CM - page 5

    1 Introducing the Motherboard Chapter 1 Introducing the Motherboard Introduction Thank you for choosing the P55H-CM motherboard. This motherboard is a high performance, enhanced function motherboard designed to support the LGA1156 socket for Intel ® L ynnfield processor for high-end business or personal desktop markets. This motherboard is based o ...

  • Elitegroup P55H-CM - page 6

    2 Introducing the Motherboard Feature • Accommodates Intel ® Lynnfield processor • Supports “Hyper-Threading” technology CPU “Hyper-Threading” technology enables the operating system into thinking it’s hooked up to two processors, allowing two threads to be run in parallel, both on separate “logical” processors within the same ph ...

  • Elitegroup P55H-CM - page 7

    3 Introducing the Motherboard The motherboard comes with the following expansion options: • One PCI Express x16 slot for Graphic Interface • T wo PCI Express x1 slots • One 32-bit PCI v2.3 compliant slot • Six 7-pin SA T A connectors • One floppy disk drive interface Expansion Options The motherboard has a full set of I/O ports and connec ...

  • Elitegroup P55H-CM - page 8

    4 Introducing the Motherboard • Intel P55 Express Chipset • LGA1 156 socket for latest Intel ® Lynnfield processor • Supports “Hyper-Threading” technology CPU • Dual-channel DDR3 memory architecture • 4 x 240-pin DDR3 DIMM sockets support up to 8 GB • Supports DDR3 1333/1066/800 DDR3 SDRAM • 1 x PCI Express Gen2 x16 slot • 2 x ...

  • Elitegroup P55H-CM - page 9

    5 Introducing the Motherboard Motherboard Components T able of Motherboard Components LABE L COM PO NENT S 1. CPU Socket LG A1156 s ocket f or I nte l ® Lynnfi el d proces sor 2. CPU_F AN CPU cool i ng f an connector 3. D IM M1~4 240-pi n D D R3 S D RA M sl ot s 4. PWR_F AN Power cool ing fan connector 5. FD D 1 Fl oppy di sk dri ve connector 6. A ...

  • Elitegroup P55H-CM - page 10

    6 Introducing the Motherboard Memo ...

  • Elitegroup P55H-CM - page 11

    7 Installing the Motherboard Chapter 2 Installing the Motherboard Safety Precautions • Follow these safety precautions when installing the motherboard • Wear a grounding strap attached to a grounded device to avoid dam- age from static electricity • Discharge static electricity by touching the metal case of a safely grounded object before wor ...

  • Elitegroup P55H-CM - page 12

    8 Installing the Motherboard Checking Jumper Settings This section explains how to set jumpers for correct configuration of the motherboard. Setting Jumpers Use the motherboard jumpers to set system configuration options. Jumpers with more than one pin are numbered. When setting the jumpers, ensure that the jumper caps are placed on the correct pin ...

  • Elitegroup P55H-CM - page 13

    9 Installing the Motherboard Checking Jumper Settings The following illustration shows the location of the motherboard jumpers. Pin 1 is labeled. Jumper Settings Jumper T ype Description Setting (default) CLR_CMOS 3-pin Clear CMOS 1-2: NORMAL 2-3: CLEAR CMOS Before clearing the CMOS, make sure to turn off the system. 1 CLR_CMOS T o avoid the system ...

  • Elitegroup P55H-CM - page 14

    10 Installing the Motherboard Installing Hardware Installing the Processor Caution: When installing a CPU heatsink and cooling fan make sur e that you DO NOT scratch the motherboar d or any of the surface-mount r esis- tors with the clip of the cooling fan. If the clip of the cooling fan scrapes across the motherboar d, you may cause serious damage ...

  • Elitegroup P55H-CM - page 15

    11 Installing the Motherboard A. Opening of the Load Plate · Put your thumb on the tail of the load plate and press the tail down. · Rotate the load plate to fully open position. B. Disengaging of the Load Lever · Hold the hook of lever and pull it to the left side to clear retention tab. · Rotate the load lever to fully open position. C. Remov ...

  • Elitegroup P55H-CM - page 16

    12 Installing the Motherboard Installing Memory Modules This motherboard accommodates four memory modules. It can support four 240-pin DDR3 1333/1066. The total memory capacity is 8 GB. Y ou must install at least one module in any of the four slots. T otal memory capacity is 8 GB. DDR3 SDRAM memory module table Memory module Memory Bus DDR3 1066 53 ...

  • Elitegroup P55H-CM - page 17

    13 Installing the Motherboard Do not remove any memory module fr om its antistatic packaging until you are ready to install it on the motherboard. Handle the modules only by their edges. Do not touch the components or metal parts. Always wear a grounding strap when you handle the modules. Installation Procedure Refer to the following to install the ...

  • Elitegroup P55H-CM - page 18

    14 Installing the Motherboard T able A: DDR3 (memory module) QVL (Qualified V endor List) The following DDR3 1800/1600/1333/1066 memory modules have been tested and qualified for use with this motherboard. Ty p e S ize Vendo r M o dule Na me ELPI D A PC 3-8500U -7- 00-AP H y nix H YMT 164U 64ZNF8-G8 AA 512M B M icron M T 4JTF6464A Y- 1G1B1 A -data ...

  • Elitegroup P55H-CM - page 19

    15 Installing the Motherboard User please be noted that DDR3 1800/1600 MHz is validated to run at 1333Mhz only . Ty p e Si ze Ven do r Modu le N am e D D R 3 1600 1GB Kings t on KH X1 2800D 3K3/ 3GX D D R 3 1800 1 GB KingM ax KH X1 4400D 3K3/ 3GX ...

  • Elitegroup P55H-CM - page 20

    16 Installing the Motherboard Installing Add-on Cards The slots on this motherboard are designed to hold expansion cards and connect them to the system bus. Expansion slots are a means of adding or enhancing the motherboard’s features and capabilities. W ith these ef ficient facilities, you can in- crease the motherboard’s capabilities by addin ...

  • Elitegroup P55H-CM - page 21

    17 Installing the Motherboard Follow these instructions to install an add-on card: 1 Remove a blanking plate from the system case corresponding to the slot you are going to use. 2 Install the edge connector of the add-on card into the expansion slot. Ensure that the edge connector is correctly seated in the slot. 3 Secure the metal bracket of the c ...

  • Elitegroup P55H-CM - page 22

    18 Installing the Motherboard Connecting Optional Devices Refer to the following for information on connecting the motherboard’s optional devices: SA T A1~6: Serial A T A connectors These connectors are used to support the Serial A T A devices for the highest data transfer rates (3.0 Gb/s), simpler disk drive cabling and easier PC assembly . It e ...

  • Elitegroup P55H-CM - page 23

    19 Installing the Motherboard F_USB1~3: Front Panel USB headers The motherboard has eight USB ports installed on the rear edge I/O port array . Additionally , some computer cases have USB ports at the front of the case. If you have this kind of case, use auxiliary USB connector to connect the front-mounted ports to the motherboard. Please make sure ...

  • Elitegroup P55H-CM - page 24

    20 Installing the Motherboard COM1~2: Onboard serial port headers Connect a serial port extension bracket to this header to add a second serial port to your system. 1 DCDB Data carry detect 2 NSINB S e r i a l Da t a I n 3 NSOUTB Serial Data Out 4 DTRB Data terminal ready 5 GN D Ground 6 DSRB Date set ready 7 RTSB Request to send 8 CTSB Clear to se ...

  • Elitegroup P55H-CM - page 25

    21 Installing the Motherboard Installing a Hard Disk Drive/CD-ROM/SA T A Hard Drive This section describes how to install IDE devices such as a hard disk drive and a CD- ROM drive. SA T A cable (optional) SA T A power cable (optional) About SA T A Connectors Y our motherboard features six SA T A connectors supporting a total of six drives. SA T A r ...

  • Elitegroup P55H-CM - page 26

    22 Installing the Motherboard Connecting I/O Devices The backplane of the motherboard has the following I/O ports: Use the upper PS/2 port to connect a PS/2 pointing device. Use the lower PS/2 port to connect a PS/2 keyboard. Use the USB ports to connect USB devices. Audio Ports LAN Port USB Ports PS2 Mouse PS2 Keyboard Connect an RJ-45 jack to the ...

  • Elitegroup P55H-CM - page 27

    23 Installing the Motherboard Connecting Case Components After you have installed the motherboard into a case, you can begin connecting the motherboard components. Refer to the following: 1 Connect the CPU cooling fan cable to CPU_F AN . 2 Connect the system cooling fan connector to SYS_F AN . 3 Connect the power cooling fan connector to PWR_F AN . ...

  • Elitegroup P55H-CM - page 28

    24 Installing the Motherboard Users please note that the fan connector supports the CPU cooling fan of 1.1A ~ 2.2A (26.4W max) at +12V . CPU_F AN: CPU cooling F AN Power Connector 1 GND System Ground 3 Sense Sensor 4 PWM PWM Pi n Signal Name Function 2 +12V Power +12V SYS_F AN/PWR_F AN: F AN Power Connectors 1 GND System Ground 3 Sense Sensor Pi n ...

  • Elitegroup P55H-CM - page 29

    25 Installing the Motherboard A TX_12V : A TX 12V Power Connector Pin Signal Name 4 Ground 3 Ground 2 Ground 1 Ground Pin Signal Name 5 +12V 6 +12V 7 +12V 8 +12V ...

  • Elitegroup P55H-CM - page 30

    26 Installing the Motherboard Hard Drive Activity LED Connecting pins 1 and 3 to a front panel mounted LED provides visual indication that data is being read from or written to the hard drive. For the LED to function properly , an IDE drive should be connected to the onboard IDE interface. The LED will also show activity for devices connected to th ...

  • Elitegroup P55H-CM - page 31

    27 Using BIOS About the Setup Utility The computer uses the latest “American Megatrends Inc. ” BIOS with support for Windows Plug and Play . The CMOS chip on the motherboard contains the ROM setup instructions for configuring the motherboard BIOS. The BIOS (Basic Input and Output System) Setup Utility displays the system’s configuration statu ...

  • Elitegroup P55H-CM - page 32

    28 Using BIOS Press the delete key to access the BIOS Setup Utility . CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.     v02.67 (C)Copyright 1985-2009, American Megatrends, Inc.  : Move F10: Save ESC: Exit +/-/: V alue Enter : Select F9: Optimized Defaults F1:General Help    Standard CMOS Setup Advan ...

  • Elitegroup P55H-CM - page 33

    29 Using BIOS For the purpose of better product maintenance, we reserve the right to change the BIOS items presented in the manual. The BIOS setup screens shown in this chapter ar e for refer ence only. Please visit our website for updated manual. Using BIOS When you start the Setup Utility , the main menu appears. The main menu of the Setup Utilit ...

  • Elitegroup P55H-CM - page 34

    30 Using BIOS Standard CMOS Setup This option displays basic information about your system. Help Item CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc. Use [ENTER], [T AB] or [SHIFT-T AB] to select a field. Use [+] or [-] to configure system Date. Standard CMOS Setup Date & Time The Date and T ime items show the current da ...

  • Elitegroup P55H-CM - page 35

    31 Using BIOS Press <Esc> to return to the Standard CMOS Setup page. IDE BusMaster (Enabled) This item enables or disables the DMA under DOS mode. W e recommend you to leave this item at the default value. Press <Esc> to return to the main menu setting page. Drive A (1 ..44 MB 3 1 / 2 ”) This item defines the characteristics of any di ...

  • Elitegroup P55H-CM - page 36

    32 Using BIOS Advanced Setup This page sets up more advanced information about your system. Handle this page with caution. Any changes can affect the operation of your computer . Thermal Management (Enabled) This item displays CPU’s temperature and enables you to set a safe temperature to Prescott CPU. TM Status (TM1/TM2) This item shows TM funct ...

  • Elitegroup P55H-CM - page 37

    33 Using BIOS 1st/2nd/3rd Boot Device ( Hard Drive/CD/DVD/Removable Drive) Use this item to determine the device order the computer used to look for an operating system to load at start-up time. The devices showed here will be different depending on the exact devices installed on your motherboard. APIC Mode (Enabled) This item allows you to enable ...

  • Elitegroup P55H-CM - page 38

    34 Using BIOS  Removable Drives (Press Enter) Scroll to this item and press <Enter> to view the following screen: Boot Other Device (Y es) When enabled, the system searches all other possible locations for an operating system if it fails to find one in the devices specified under the First, Second and Third boot devices. Press <Esc> ...

  • Elitegroup P55H-CM - page 39

    35 Using BIOS Advanced Chipset Setup This page sets up more advanced information about your system. Handle this page with caution. Any changes can affect the operation of your computer . CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc. Advanced Chipset Setup Memory Remap Feature Enabled Help Item ENABLE: Allow remapping of ov ...

  • Elitegroup P55H-CM - page 40

    36 Using BIOS Integrated Peripherals This page sets up some parameters for peripheral devices connected to the system. CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc. Integrated Peripherals SA T A Configuration IDE Onboard SA T A Mode Enhanced Onboard Audio Function Enabled Onboard LAN Function Enabled Onboard LAN Boot ROM D ...

  • Elitegroup P55H-CM - page 41

    37 Using BIOS Press <Esc> to return to the main menu setting page. Power Management Setup This page sets up some parameters for system power management operation. Select the ACPI state used for System Suspend. CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc. Power Management Setup ACPI Suspend T ype (S3) Use this item t ...

  • Elitegroup P55H-CM - page 42

    38 Using BIOS Press <Esc> to return to the main menu setting page. Resume By USB (S3) (Disabled) This item allows you to enable/disable the USB device wakeup function from S3/S4 mode. Resume By PS2 KB (S3) (Disabled) This item enables or disables you to allow keyboard activity to awaken the system from power saving mode. Resume By PS2 MS (S3) ...

  • Elitegroup P55H-CM - page 43

    39 Using BIOS Init Display First (PCI) Use this item to select which graphics controller to use as the primary boot devices. PCI/PnP Setup This page sets up some parameters for devices installed on the PCI bus and those utilizing the system plug and play capability . Help Item Init Display First PCI CMOS Setup Utility - Copyright (C) 1985-2009, Ame ...

  • Elitegroup P55H-CM - page 44

    40 Using BIOS Smart Fan Function (Press Enter)  Scroll to this item and press <Enter> to view the following screen: CPU SMART F AN Control (Enabled) This item allows you to enable/disable the control of the CPU fan speed by changing the fan voltage. CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc. Smart Fan Function ...

  • Elitegroup P55H-CM - page 45

    41 Using BIOS System Component Characteristics These items display the monitoring of the overall inboard hardware health events, such as System & CPU temperature, CPU & DIMM voltage, CPU & system fan speed,...etc. • System T emperature • CPU Fan Speed • System Fan Speed • CPU Vcore • VDIMM Press <Esc> to return to the ma ...

  • Elitegroup P55H-CM - page 46

    42 Using BIOS Frequency/V oltage Control This page enables you to set the clock speed and system bus for your system. The clock speed and system bus are determined by the kind of processor you have in- stalled in your system. CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc. Frequency/Voltage Control Help Item Manufacturer: In ...

  • Elitegroup P55H-CM - page 47

    43 Using BIOS Supervisor Password (Not Installed) This item indicates whether a supervisor password has been set. If the password has been installed, Installed displays. If not, Not Installed displays. Press <Esc> to return to the main menu setting page. Supervisor Password This page helps you install or change a password. CMOS Setup Utility ...

  • Elitegroup P55H-CM - page 48

    44 Using BIOS Save & Exit Setup Highlight this item and press <Enter> to save the changes that you have made in the Setup Utility and exit the Setup Utility . When the Save and Exit dialog box appears, select [OK] to save and exit, or select [Cancel] to return to the main menu. Exit Without Saving Highlight this item and press <Enter&g ...

  • Elitegroup P55H-CM - page 49

    45 Using BIOS Updating the BIOS Y ou can download and install updated BIOS for this motherboard from the manufacturer’s W eb site. New BIOS provides support for new peripherals, improve- ments in performance, or fixes for known bugs. Install new BIOS as follows: This concludes Chapter 3. Refer to the next chapter for information on the software s ...

  • Elitegroup P55H-CM - page 50

    46 Using BIOS Memo ...

  • Elitegroup P55H-CM - page 51

    47 Using the Motherboard Software Chapter 4 Using the Motherboard Software Auto-installing under Windows XP/V ista/7 The support software DVD-ROM/CD-ROM disc loads automatically under Windows XP/V ista/7. When you insert the DVD-ROM/CD-ROM disc in the DVD-ROM/CD- ROM drive, the autorun feature will automatically bring up the install screen. The scr ...

  • Elitegroup P55H-CM - page 52

    48 Using the Motherboard Software Application T ab Lists the software utilities that are available on the disk. Read Me T ab Displays the path for all software and drivers available on the disk. Running Setup Follow these instructions to install device drivers and software for the motherboard: 1. Click Setup. The installation program begins: The fo ...

  • Elitegroup P55H-CM - page 53

    49 Using the Motherboard Software 2. Click Next. The following screen appears: 3. Check the box next to the items you want to install. The default options are recom- mended. 4. Click Next run the Installation Wizard. An item installation screen appears: 5. Follow the instructions on the screen to install the items. 1. Drivers and software are autom ...

  • Elitegroup P55H-CM - page 54

    50 Using the Motherboard Software Manual Installation Insert the disk in the DVD-ROM/CD-ROM drive and locate the P A TH.DOC file in the root directory . This file contains the information needed to locate the drivers for your motherboard. Look for the chipset and motherboard model; then browse to the directory and path to begin installing the drive ...

  • Elitegroup P55H-CM - page 55

    51 Intel ® Matrix Storage Manager RAID Configurations The Intel ® Matrix Storage Manager allows you to configure RAID 0, and 1 sets on the external Serial A T A hard disk drives. Complete the following steps before you create a RAID set: 1 . Install the external Serial A T A hard disk drive (HDD) on your system. 2 . Set the Onboar d SA T A Mode i ...

  • Elitegroup P55H-CM - page 56

    52 Intel ® Matrix Storage Manager RAID Configurations 2 . The main Intel ® Matrix Storage Manager RAID BIOS menu appears. Entering Intel ® Matrix Storage Manager RAID BIOS util- ity 1 . During POST , press <Ctrl-I> to enter the Intel ® Matrix Storage Manager RAID BIOS menu. 3 . Use the arrow keys to move the color bar and navigate through ...

  • Elitegroup P55H-CM - page 57

    53 Intel ® Matrix Storage Manager RAID Configurations 2 . When the RAID Level item is highlighted, use the up/down arrow key to select the RAID set that you want to create. Creating a RAID set 1 . In the main Intel ® Matrix Storage Manager RAID BIOS menu, highlight Cr eate RAID V olume using the up/down arrow key then press <Enter>. 3 . Key ...

  • Elitegroup P55H-CM - page 58

    54 Intel ® Matrix Storage Manager RAID Configurations Pressing <Y> deletes all the data in the HDDs. 5 . The following screen appears, displaying the relevant information about the RAID set you created. Users please be noted that RAID 0 (Stripe) is set to accelerate the data access, and RAID 1 (Mirror) is set to provide the data backup. If y ...

  • Elitegroup P55H-CM - page 59

    55 Intel ® Matrix Storage Manager RAID Configurations Deleting a RAID set 1 . In the main Intel ® Matrix Storage Manager RAID BIOS menu, highlight Delete RAID V olume using the up/down arrow key then press <Enter>. 2 . Use the space bar to select the RAID set you want to delete. Press the <Del> key to delete the set. 3 . A dialogue bo ...

  • Elitegroup P55H-CM - page 60

    56 Intel ® Matrix Storage Manager RAID Configurations Resetting disks to Non-RAID An HDD that has been previously configured as part of another RAID set in another platform is called a broken RAID HDD. When you install a broken RAID HDD, you cannot select this disk when configuring a RAID set through the Intel ® Matrix Storage Manager option. If ...

  • Elitegroup P55H-CM - page 61

    57 Trouble Shooting Chapter 6 Trouble Shooting Start up problems during assembly After assembling the PC for the first time you may experience some start up problems. Before calling for technical support or returning for warranty , this chapter may help to address some of the common questions using some basic troubleshooting tips. a) System does no ...

  • Elitegroup P55H-CM - page 62

    58 Trouble Shooting c) The PC suddenly shuts down while booting up. 1. The CPU may experience overheating so it will shutdown to protect itself. Ensure the CPU fan is working properly . 2. From the BIOS setting, try to disable the Smartfan function to let the fan run at default speed. Doing a Load Optimised Default will also disable the Smartfan. M ...

  • Elitegroup P55H-CM - page 63

    u B r e w o P d e s s e r p s i n o i a f C P t u b . t r a t s o t s l s e Y y l p p u S r e w o P f i k c e h C t i n U ( U S P ) n i k r o w s i g o N o N d n u o s p e e B y n A ？ o N k c e h c d n a S O M C R L C V 2 1 U P C f i r e w o p d e t c e n n o c s i e R t s C P e h t t r a i w m e l b o r P ? d r a o b r o U S P h t A M R t c a t ...

  • Elitegroup P55H-CM - page 64

    60 Trouble Shooting Memo ...

Manufacturer Elitegroup Category Motherboard

Documents that we receive from a manufacturer of a Elitegroup P55H-CM can be divided into several groups. They are, among others:
- Elitegroup technical drawings
- P55H-CM manuals
- Elitegroup product data sheets
- information booklets
- or energy labels Elitegroup P55H-CM
All of them are important, but the most important information from the point of view of use of the device are in the user manual Elitegroup P55H-CM.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Elitegroup P55H-CM, service manual, brief instructions and user manuals Elitegroup P55H-CM. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Elitegroup P55H-CM.

Similar manuals

A complete manual for the device Elitegroup P55H-CM, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Elitegroup P55H-CM by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Elitegroup P55H-CM.

A complete Elitegroup manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Elitegroup P55H-CM - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Elitegroup P55H-CM, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Elitegroup P55H-CM, that we can find in the current document
3. Tips how to use the basic functions of the device Elitegroup P55H-CM - which should help us in our first steps of using Elitegroup P55H-CM
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Elitegroup P55H-CM
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Elitegroup P55H-CM in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Elitegroup P55H-CM?

Use the form below

If you did not solve your problem by using a manual Elitegroup P55H-CM, ask a question using the form below. If a user had a similar problem with Elitegroup P55H-CM it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)