-
Konica Minolta Q-M200 - page 1
...
-
Konica Minolta Q-M200 - page 2
Chapter 1 Preparations Names of Parts 察 Mode select dial 拶 Power button 撮 Shutter button 擦 Lens 札 Selftimer LED 殺 Active AF sensor 薩 Viewfinder window 雑 Flash 皐 Flash adjustment sensor 鯖 Mode setup buttons 捌 Image quality mode button (QUALITY) 錆 Selftimer button 鮫 Flash mode button 皿 Photo mode button (MODE) 晒 Data dis ...
-
Konica Minolta Q-M200 - page 3
○ * If foreign matter adhere s to the active AF sensor or the eye sen sor, this may lead to malfunction of the sensor. 桟 Eye sensor 燦 Viewfinder LED 珊 Card access LED 産 Viewfinder eyepiece 算 LCD monitor 纂 LCD monitor power button (LCD POWER) 蚕 Menu button (MENU) 讃 Set/Zoom button (SET/ZOOM) 賛 Select button 酸 Card cover 餐 Str ...
-
Konica Minolta Q-M200 - page 4
Data display panel 察 Photo mode indicator Press the photo mode bu tton (MODE) of the mode setup buttons to switch be tween the following 5 preset st ates of subjects: (No icon: initial) Sports ( ): Quick action Infinity ( ): Long distance Macro ( ): Extremely short distance Text ( ): Characters (black & white) 拶 Battery indicator The remain ...
-
Konica Minolta Q-M200 - page 5
撮 Image quality mode indicator Press the image quality mode button (OUALITY) of the mode setup butto ns to sw itch the mode among the follow ing 4 choices of image quality: FINE (Initial setting) SUPER FINE BASIC ECONOMY 擦 Sandglass indicator Flashes to indicate an ongoing access to the CompactFlash card (for writing shot images to the card or ...
-
Konica Minolta Q-M200 - page 6
雑 Flash mode indicator Press th e flash button ( ), a mod e setup b utto n, to switch it among (1) Auto Flash ( AUTO ) (default), (2) Red eye Reduction/Au to Flash ( AUT O ), (3) Flash On ( ), (4) Red eye Reduction/Flash On ( ) and (5) Flash Off ( ). As the flash button is switch ed from one setting to another, a correspondin g mark will appea r ...
-
Konica Minolta Q-M200 - page 7
Installing the Batteries/Special Lithium-ion Battery and the Spe cial Adapter for Q-M200 (Option) * Use of the lithium-ion battery is recommended. First, press the camera power button and the LCD monitor button to turn both off. 1. Open the battery cover on the bottom by pushing the battery cover lock button in the direction of the arrow mark. Warn ...
-
Konica Minolta Q-M200 - page 8
• Lithium-ion battery (PX-LB1) Load the battery with the label facing upw ard and with the plus and minus electrodes positio ned as shown in the diagram. 3. After making sure that the batteries ar e correctly loaded, close the b attery cov er positively until it clicks into position. Note: Battery replacement is indicated whe n only the right hal ...
-
Konica Minolta Q-M200 - page 9
Inserting/Ejecting Compact F lash (CF) card CF card applications and handli ng ● CF cards can be used to store photographic images and to transfer da ta to a personal computer (see T ransfe rring Image Files to a Personal Computer). Refer to CompactFlash (CF) cards concerning handling. Preparation ● Make sure that the lens cover is closed and t ...
-
Konica Minolta Q-M200 - page 10
(At Insertion) * In serting t he CF card in th e wrong direct ion would cause damage to the connector. (At Ejection) * If the CF card won't eject easily when you press the eject lock button and slide the card e ject button, push in the CF card on ce again and then slide the card eje ct button while pressing the eject lock button strongly. * If ...
-
Konica Minolta Q-M200 - page 11
Installing the Strap 1. Pass the narrow shor t end of the strap through the strap eyelet on the right side of the camera. Use a shar p pointed ob - ject as an aid for passing the strap when thi s is difficult. 2. Pass the long end of the strap through the loop formed by the sho rt end and pull the long end to tighten. Warning: When carrying the cam ...
-
Konica Minolta Q-M200 - page 12
Setting the Date and Time Set the date and time when using the camera for the first time after purchase. Setting is possible from January 1, 1970 to December 31, 2037. In this example, set the date and time from Janu- ary 1, 1999 (0:00) to September 3, 2000 (10:30). Note: * The date and time settings are powered by the backup battery and are not lo ...
-
Konica Minolta Q-M200 - page 13
3. Press the select button ( ) once and select “Set Date & Time”. If any item other th an “Set Date & Tim e” has al- ready been selected, either pre ss the select button ( ) again to re-select or press the select button ( ) and return to the previous item. (*2) 4. Press the Set/Zoom button. “Year” is selecte d, so pres s the sel ...
-
Konica Minolta Q-M200 - page 14
6. Press the select button ( ) and select “Date”. Now press the select buttons ( , ) and select the “Date”. 7. Press the select button ( ) and select “Time”. Now press the select buttons ( , ) and select the hour and minute. 8. Press the Set/Zoom button to switch to the setting item check screen. ...
-
Konica Minolta Q-M200 - page 15
9. Press the select buttons ( , ) and select either “YES” or “NO”. Select “YES” and press the Set/Zoom button to save the settings and return to the screen in step 3 . Select “NO” and p ress the Set/Zoom button to return to the setup screen in step 3 without saving the settings. *1: If the menu bu tton is pressed before selecting th ...
-
Konica Minolta Q-M200 - page 16
Chapter 2 Basic Photography Basic Photography Holding the camera ● Hold the camera firmly in both hands and pr ess the elbows against the body for added stability. ● When taking v ertical shots while using the flash , hold the camera so that the flash is at the top. ○ Be careful to avoid placing the fingers or strap, etc., in front of the fla ...
-
Konica Minolta Q-M200 - page 17
The meaning of the viewfinder LED/Card access LED located on the left side of the viewfinder is shown in the table below . Us e this as reference for all operations. *1 W hen the camera is in the macro mode, the parallax warning will appear when looking through the view finder with the LCD m onitor set to off and eye start set to ON. ...
-
Konica Minolta Q-M200 - page 18
Shooting a picture Normally , photographs are taken w ith the subject at distances of 0.3 m or more. When the distan ce to the subjec t is 0.1 m to 0.3 m , please refer to Macro (Close-up) Photography . 1. Make sure the CF card has been inserted. 2. Set the mode select dial on the t op of t he camera to Photo ( ). Notes: * When the power is already ...
-
Konica Minolta Q-M200 - page 19
Reference: * See Release Lock. Note: When looking through the viewfinder, the sound of starting the e ye start will be heard. However, this is not malfunction. (When the eye start is set to ON.) 5. Gently press the shutter button farther. When the beep sounds, taking of the photograph ha s been completed. Then, w riting of the image to the CF card ...
-
Konica Minolta Q-M200 - page 20
Focus lock photography Follow the following procedures w hen the subject being focused on is not po sitioned in the center of the viewfinder . 1. Position the subject w ithin the focus frame and lightly press the shutter button halfway. The v iew- finder will light green and the focus position will be locked. Note: * After the focus position is lo ...
-
Konica Minolta Q-M200 - page 21
* When there is no av ailable space remaining on the CF card (when “0” (r emaining frame count) appears on the d ata display panel) (warning beep). * While writing to the CF card is in progress (in- cluding compression). * While the photographic mode ( ) setting i s being changed. * Before exposure and focu s have been dete r- mined. * While an ...
-
Konica Minolta Q-M200 - page 22
Remaining frame count The number of the remaini ng frames may not decrease depending on the subject photographed. Note: * The auto power-off function operates even when the AC adapter is used. ...
-
Konica Minolta Q-M200 - page 23
Chapter 3 Advanced Photography Using the Mode Setup Buttons The 4 buttons (Photo mod e, Flash mode, Selftimer and Image quality mode) on the top o f the camera can be used to change t he photographic settings. These settings can be che cked using the icons displayed on the data display panel. Photo Mode button (MODE) Subjects are classified into fo ...
-
Konica Minolta Q-M200 - page 24
Sports: Use to photograph rapidly moving subjects. Infinity: Focus is fixed at infini ty. Use to photogra ph scenery. Macro: Used to focus at di stances betw een 0.1 m and 0.3 m. Check the image on the LCD monito r before taking the photograph. Text: Images are recorded in monochrome. Use to photograph text, etc. 4. Look through the viewfinder, com ...
-
Konica Minolta Q-M200 - page 25
Flash Mode Button It is possible to preset the flash for situation s where it is anticipa ted that sometimes the re may be insufficient light for normal photography . The flash range is 1.0 m-3 .0 m. If the flash is used with subjects clo ser than this dista nce the photo- graph will be too light; if used beyond thi s range, the photograph will be ...
-
Konica Minolta Q-M200 - page 26
Flash On [ ] The flash fires for ea ch photograph. ↓ Redeye Reduction/ Flash On [ ] Pre-flashes are alw ays fired first to reduce th e redeye effect, followed by the main flash to reduce the redeye effect. ↓ Flash Off [ ] The flash does not fir e, regardless of the lighting conditions. Notes: * Set for places where flash photography is for- bid ...
-
Konica Minolta Q-M200 - page 27
* The viewfinder LED lights red after a flash photograph is take n to indicate that the fl ash is charging. Wait until th e viewfinder LED turns off before taking the next flash photograph. Selftimer Button This button enables the camera to release the shutter automatically and is used when the pho- tographer wishes to be included in the photograph ...
-
Konica Minolta Q-M200 - page 28
* The selftimer is cancelled each time a photo- graph is taken; ther efore, to continue u sing the selftimer, it i s necessary to press the selftimer button again. * The timer operating time can be set to either 10 sec. (initial se tting) or 3 sec. in the se tup mode. Image Quality Mode (QUA LITY) The image quality mode button is used to select any ...
-
Konica Minolta Q-M200 - page 29
4. Look through the viewfinder, compose the scene and lightly press the shutter bu tton half- way. The viewfinder LED w ill light green, and ex po- sure and focus will be locked. 5. Press the shutter button further. A beep w ill sound when the photogr aph has been taken. Note: * The selected mode will remain in effect even when the power is turned ...
-
Konica Minolta Q-M200 - page 30
Image quality mode and displays When images photographed in the above modes are played back, th e four modes w ill be displayed in the center of the L CD monitor as follows. [SUPER FINE] → [SFI] [FINE] → [FIN] [BASIC] → [BSC] [ECONOMY] → [ECM ] ...
-
Konica Minolta Q-M200 - page 31
Macro (Close-up) Photography * Use of a dedicated lithium-ion battery (supplied) is recommended. * With Size AA alkaline batteries, the camera can shoot about 10 pictures (if the LCD monitor is turned on) or about 15 0 pictures (if the LCD monitor is turned off) and plays record ed pictures continuously for about 20 minute s (all under our defined ...
-
Konica Minolta Q-M200 - page 32
4. Press the LCD monitor power button ( LCD POWER ) to display the image (through image) through the lens. 5. Use the LCD monitor to compo se the scene and then lightly press the shutter button halfway . The viewfinder LED w ill light green and both exposure and focus will be locked. Caution: In macro (close-up ) photography, the shooting range doe ...
-
Konica Minolta Q-M200 - page 33
* You may experience difficulty focusi ng in the following instances. • In an e xcessively dark place wher e the sub- ject becomes overly dark. • O bjects wit h little or no contras t (such as skies, white walls, and car hoods) ...
-
Konica Minolta Q-M200 - page 34
Using the Digital 2 × Zoom Function * Use of a dedicated lithium-ion battery (supplied) is recommended. * With Size AA alkaline batteries, the camera can shoot about 10 pictures (if the LCD monitor is turned on) or about 15 0 pictures (if the LCD monitor is turned off) and plays record ed pictures continuously for about 20 minute s (all under our ...
-
Konica Minolta Q-M200 - page 35
5. Press the Set/Zoom button once. The image will be enlarged two times. Pr ess the Set/Zoom button again to return the image to the stan- dard size. While zo om is set, the periphery of th e monitor will be displayed in blue. 6. Look through the viewfinder, compose the scene and lightly press the shutter button half- way. The viewfinder LED w ill ...
-
Konica Minolta Q-M200 - page 36
Setting the Photographic Conditions (Entering the Menu Mode) * Use of a dedicated lithium-ion battery (supplied) is recommended. * W ith Size AA alkaline batteries, the camera can shoot about 10 pi ctures (if the LCD monitor is turned on) or about 150 pi ctures (if the LCD monitor is turned o ff) and p lays recorded pi ctures continuously for ab ou ...
-
Konica Minolta Q-M200 - page 37
Adjusting the Exposure (Set Camera Exposure Menu) Using the 4-frame Cont inuous Shooting Mode Adjusting the Brightness of the LCD Monitor 5. Press the select ( / ) buttons to change the mode. The Basic Keys ● T o enter the menu mode (within th e broken lines) to change the mode. → Press the menu button. ● T o exit the menu mode (within the br ...
-
Konica Minolta Q-M200 - page 38
* When t he men u button is pressed from the through image to activate the menu select mode (within the broken lines), the icon indi- cating the menu area will appear at the top of the monitor and the selected menu will b e highlighted. In this Photo menu, “Set Camera Exposure” menu (left si de) → “Continuous shooting” menu (c enter) → ...
-
Konica Minolta Q-M200 - page 39
A djusting the Exposure (Set Camera Exposure Menu) Exposure adjustment i s used to consciously brighten or darken images. When the LCD monitor is on, th e exposure can be adjusted ± 1.5EV in 0.3EV steps. 1. Set the mode select dial to Photo ( ). Note: * When the power is already turned on with Playback ( ) or set up ( SET UP ), set the mode select ...
-
Konica Minolta Q-M200 - page 40
4. Press the menu button once to enable mode selection (“Set Camera Exposur e” setting screen). The “Set Camera Exposure” icon i s highlighted in the upper left corner of the LCD monitor screen, with the through image appearing still. 5. Press the Se t/Zoom button once . The exposure adjustment bar will appe ar at the bottom o f the screen. ...
-
Konica Minolta Q-M200 - page 41
Using the 4-frame Continuous Shooting Mode (Continuous shoot- ing menu) * ECONOMY mode only. In the 4-frame continuous shooti ng mode, 4 con- secutive photographs can be taken w ith 3 differen t intervals (L: Low , N: Normal, H: High) between them. When played back, all four photographs are displayed on the LCD monitor at the same time. “Continuo ...
-
Konica Minolta Q-M200 - page 42
Display duri ng play back 1. Set the mode select dial to Photo ( ). Note: * When the power is already turned on with Playback ( ) or set up ( SET UP ), set the mode select dial to Photo ( ) to cancel these two modes and open th e lens cover automati- cally. 2. Press the power button. The lens cover will open automatically . 3. Press the LCD monitor ...
-
Konica Minolta Q-M200 - page 43
medium-speed (N;3 frame s/sec.) a nd high- speed (H;4 frames/sec.). 7. Press the select button s ( , ) and change to the 4-frame continuous shooting mode. 8. Press the Set/Zoom butto n to return to the through image. The through image frame will be di splayed in yellow, ex cept in the standard mode. To change the setting mode again, repeat steps 4 ...
-
Konica Minolta Q-M200 - page 44
A djusting the Brightn ess of the LCD Monitor The brightness of the LCD monitor can b e ad- juste d in accorda nce with the brightne ss of the surroundings. 1. Set the mode select dial to Photo ( ). Note: * When the power is already turned on with Playback ( ) or set up ( SET UP ), set the mode select dial to Photo ( ) to cancel these two modes and ...
-
Konica Minolta Q-M200 - page 45
4. Press the menu button once to enable menu selection (“Set Camera Exposur e” setting screen). The thr ough image will beco me a still image. 5. Press the select button s ( , ) and change to the “Set Screen Co ntrast” menu. The brightness adjustment menu icon w ill be display ed high- lighted in the top rig ht corner of the LC D monitor sc ...
-
Konica Minolta Q-M200 - page 46
Chapter 4 Basic Playback Setting to the Playback Mode The following explains display of photographed images on the LCD monitor , frame advance, v iewing the monitor display and zoom playback. 1. 2. 3. 4. 5. ...
-
Konica Minolta Q-M200 - page 47
1. 察 Set the mode sele ct button to playback ( ) and press the power button. 2. * The frame number of the displayed image (“No.25” in the example) is di splayed in the lower right corner of the monitor screen. The frame number is given in serial order to the images that can be played back with this camera. If the image is erased, e tc. , the ...
-
Konica Minolta Q-M200 - page 48
will appear in th e upper right corner of the screen. 撮 -1 The image number and da te photographed will disappear if the button s are not pressed within 2-3 sec. Playback with zoom 撮 -2 Each time the Set/Zoom button is pressed, the image will be enlarged con secutively in the sequence 2 × → 4 × → 1 × → 2 × ... 擦 The display positi o ...
-
Konica Minolta Q-M200 - page 49
Note 2: The image number is usuall y displayed in yellow . The image number of basic image files recorded with the produ cts of other companies is displayed in red. If the im- age numbers appeared, it mean s that some functions (su ch as erasure and ro- tation) are disabled. Note 3: A maximum of 1,000 image files can be played back with this camera ...
-
Konica Minolta Q-M200 - page 50
Displaying Images on a TV Set The video output cord provided can be used to display images on a TV set; howev er , images cannot be display ed on a TV set a nd the LCD monitor at the same time. Preparations Make s ure that t he CF car d conta ining th e images is inserted into the came ra and that a ba t- tery/batteries is/are loaded or the AC adap ...
-
Konica Minolta Q-M200 - page 51
Icon display on the TV screen ● The following function restriction s apply during TV screen displays. * Dates photographed and image num bers are not displayed. * Only 4 functions can be selected: erase , pro- tect setting, index play back and slide show playback. Select all other functions afte r returnin g to LCD monitor display . ○ Caution * ...
-
Konica Minolta Q-M200 - page 52
● Time may be requ ired for sw itching the play - back on the TV screen or on the LCD monitor when the video output cord i s connected or disconnected during index playback. ...
-
Konica Minolta Q-M200 - page 53
Chapter 5 Application Playback The Playback Menus There are eight playback mode menus, as shown below . Refer to the respectiv e pages concerning the settings. The following ex plains how to access the various menus. ...
-
Konica Minolta Q-M200 - page 54
1. Set the mode select dial to Playback ( ). 2. With the LCD monitor off, press the pow er button. * The playback image will appear. * The frame number of the image will appear in the lower right part of the monitor (No.25 in this example). * 2-3 sec. later the image number (directory number, file number) w ill appear in the u pper left corner of t ...
-
Konica Minolta Q-M200 - page 55
Displaying Multi Images at the Same Time (Index Playback) This function is use d to display nine images a t the same time on the L CD monitor , and also it is used to access the desired image rapidly . Press the select buttons ( , )from the menu display screen to select the index play back menu screen ( ). 1 . Press the Set/Zoom bu tton to displ ay ...
-
Konica Minolta Q-M200 - page 56
2 . Use the select buttons ( , , , ) to select an image to be displayed. * Press the menu button to can cel index screen selections. 3. Press the Set/Zoom butto n to return to the standard playback screen. * 2-3 sec. later the image number (directory number, file number) w ill appear in the u pper left corner of the monitor and the date and time ph ...
-
Konica Minolta Q-M200 - page 57
1. Press the Set/Zoom button. * The images will be displayed consecutiv ely at intervals of approximately 3 sec. (the slide show will start). * The frame numbers will be display ed consecu- tively in the low er right corner of the screen. * The menu will again appear 2-3 sec. a fter all of the images have been displayed. * Pressing the menu button ...
-
Konica Minolta Q-M200 - page 58
Protect Setting for Important Images Images can be prote cted to prevent them being deleted. Protected image s are not deleted acci- dentally even if an attempt i s made to delete all images. Press the se lect bu ttons ( , ) from the menu display screen to select the image protect menu screen ( ). ● T o protect an image for the first time 1. Pres ...
-
Konica Minolta Q-M200 - page 59
A djusting the Brightn ess of the LCD Monitor press the select b uttons ( , ) from menu dis- play screen to select the brightness adjustment mode menu screen ( ). 1. Press the Set/Zoom button to display the brightness adjustment menu screen. * An adjustment bar appears at th e bottom of the LCD monitor screen. 2. Press the select buttons ( , ) to a ...
-
Konica Minolta Q-M200 - page 60
Chapter 6 Advanced Operations Image Editing Erasing images (1) Images can be erased singly or collectivelly . T o use this erase function, press the select buttons ( , ) from the menu display screen to select the erase menu screen ( ). ● When the image to be erased is not pro- tected (Erasing an unprotected image) 1. Press the Set/Zoom button. 2. ...
-
Konica Minolta Q-M200 - page 61
3. Press the Set/Zoom button to execute. * When “This” is selected, a message will be displayed during erasure and then , when im- ages remain on the CF card , the standard playback screen will return. If no images other than those erase d still re- main, the message “No Picture in camera” w ill be displayed. * When “NO” is selected, th ...
-
Konica Minolta Q-M200 - page 62
Erasing images (2) ● When the image to be erased is protected (Erasing a protected image) Remove the protection befo re attempting to era se the image. ● Erasing al l unprotected images 1. Press the Set/Zoom button. * “NO” is selected. 2. Press the select button ( ) once. * “ALL” is selected. 3. Again press the Set/Zoom button. * The er ...
-
Konica Minolta Q-M200 - page 63
If all of the images to be era sed are protected, the message “All Pictur e s Protected” w ill ap- pear and the normal play back screen w ill re- turn. * If the CF card includes images photographed with a digital camera other than the Q-M200 and the erasure of all fr ames is executed, im- ages photographed only with this cam era will be erased. ...
-
Konica Minolta Q-M200 - page 64
1. Press the Set/Zoom button. * The image rotation mode is activated. * The message “Not applicable to this i mage” will appear in the case of image s recorded with the products other than Q-M200 and the standard playback screen will return 2-3 sec. later. * If an attempt is ma de to rotate a prot ected im- age, the message “Prote cted” wil ...
-
Konica Minolta Q-M200 - page 65
3. After selecting the rotation, pres s the Set/Zoom button. * The rotated image will be played back. * Once an image rotation is se t, the setting information is stored and th e image is dis- played rotated automat ically next time. Selecting images to be printed (Creating A utomatic image print file) Note: Images cannot be printed with this camer ...
-
Konica Minolta Q-M200 - page 66
If you wish to print images on your own printer using DPOF , check with the printer manufacturer to see if your printer is DPOF compatible or not. Note: Images cannot be printed from the created Automatic image print file if your printer is not DPOF compatib le. Press the select buttons ( , ) from th e menu display screen a nd select t he print sel ...
-
Konica Minolta Q-M200 - page 67
Once these specifi cations have been comp leted, verify them on the Print List menu de scribed in th e following section. *1 DPOF: This is the abbreviation for Digital Pri nt Order Format. Notes: * From 1 to 99 print copie s can be sp ecified as “Number”. * If the number of images specified in steps 3 ( ① and ③ ) is too many a message “ T ...
-
Konica Minolta Q-M200 - page 68
Press the select buttons ( , ) from th e menu display screen to select the print ima ge list menu screen ( ). 1. Press the Set/Zoom button. * The print list will be displayed ( left: image num- bers (directory number) - (fi le number), right: number of copies). * When a print list is too large to fit within the current display, press the select but ...
-
Konica Minolta Q-M200 - page 69
If “YES” is sele cted and the Set/Zoom button is pressed, the prin t will be deleted from the print list and the print list screen will return. If “NO” is selected and the Set/Zoom button is pressed, deletion will be canceled and the print list screen will return. * When “Cancel All” is selected, all of the print data in the list will b ...
-
Konica Minolta Q-M200 - page 70
1. Set the mode select dial to SET UP ( SET UP ). 2. With the LCD mo nitor off, turn on the power button. The setup screen will appear. 3. Press the select buttons ( , ) to select the necessary item. 4. The values o f the v arious settings ar e changed with the Set/Zoom button. CF card format Press the Set/Z oom button to dis- play the format scree ...
-
Konica Minolta Q-M200 - page 71
* Depending on the printer specifica - tions, the settings may not ha ve any effect on the prints in some cases. * W hen photogr aphs are taken with a shutter speed of fr om 2 sec. to 1/8 sec., the quality may deteriorate in some cases due t o the characteri s- tics of the video element; howe ver, this company wi ll not pay compensa- tion for any p ...
-
Konica Minolta Q-M200 - page 72
Setting the date printing Each time the Se t/Zoom button is p ressed, the setting alternates between ON (initial setting) and OFF. When ON is set, the date is recorded in image data registe red in the Au tomatic image print file for use by the date prin ting. This se tting is effective only for the images recorded in the automatic image print file ...
-
Konica Minolta Q-M200 - page 73
● Changing the auto shut off (auto power-off) time (*) Each time the Set/Zoom button i s pressed, the se tting alternate s in se- quence between “3 min” (initial setting), “10 min” and OFF . ● Changing the w hite balance set- ting (*) Each time the Set/Zoom button i s pressed, the se tting alternate s in se- quence between “ Auto” ( ...
-
Konica Minolta Q-M200 - page 74
Formatting the CF card W hen a CF card is form a tted, all protected, as well as unprotected, images stored on it will be lost. 1. Press the Set/Zoom button. 2. Press the select b uttons ( , ) to sele ct YES to format or NO to cancel formatting. 3. Press the Set/Zoom button. * When Yes is selected, forma tting will be exe- cuted. During formatting, ...
-
Konica Minolta Q-M200 - page 75
Transferring Image Files to a Personal Computer 1. IBM PC/AT compatible • Microsoft Windows 95, Windows 98, Win- dows NT 4.0 installed • RS-232C interface (D-SUB 9-pin connector) • Display with 32,000 or more color s and 640 × 480 pixels or better. • 16 MB or more of available RAM (at least 32 MB of RAM recommended) • 60 MB or more of av ...
-
Konica Minolta Q-M200 - page 76
Preparation * Turn off the personal computer power supply. * Turn off the camera power supp ly and make sur e the CF card con taining the images h as been in- serted. Make sure that either batteries have been loaded or that the AC adapter for Q-M200 (option) has been connected to a power outlet. 1. Use the connecting (interface) cable to connect th ...
-
Konica Minolta Q-M200 - page 77
1. Remove the CF card from t he came ra and load it into the Ko n- ica CompactFlash Card Adapter. * The specifications and appearance of the Kon- ica CompactFlash Card Adapter are subject to change without notice. 2. Insert the a dapter into the PCMCIA Type II card slot of a personal computer that can read ATA cards. * Refer to the instru ction man ...
-
Konica Minolta Q-M200 - page 78
* Imagse files can be copied to other storage media, such as hard di sks, or erased as needed. Consult the instr uction manual for your OS. We are not responsible for damage or failure that may r esult from these opera - tions. * Keep backup copies of any valuable data. * The protection se tting con figured with the camera is a read- only file attr ...
-
Konica Minolta Q-M200 - page 79
Chapter 7 Appendix When Carrying the Camera wi th You on Overseas Trips Using the Custom AC A dapter (Optional) <Overseas> • Do not operate the AC adapter from supply voltages outside the spe cified range of 100 to 240 VAC. • The AC cable that comes with the PX-AC1 ca n be used only in di stricts where a sup ply voltage of 125 VAC or low ...
-
Konica Minolta Q-M200 - page 80
Using a Local TV Receiver to Play Recorded Images • This came ra can be use d with a TV receiver (or monitor) operating on an NTSC or PAL ba sis, with a video input terminal. • The included video output cable is required. • This camera is factory-set for NTSC. When using it i n a country where the PAL sys- tem is used, switch its video output ...
-
Konica Minolta Q-M200 - page 81
Maintaining and Keeping the Ca mera Cleaning the camera Never use solvents such as benzine and thinner to clean this camera. • Before cleaning, first remove the batteries or disconnect the plug of the AC adapter from the power outlet. • The surfa ce of the outer cover is ma de of metal but is specially processed and printed. Wip ing with a solv ...
-
Konica Minolta Q-M200 - page 82
CF card Handling • Do not bend the card or apply excessive force. • Do not store the card where the humidity is high, where there is ex cessive dust and near sources of static elec tricity or magnetism. • Do not allow dust, moisture or foreign ma tter to accumulate on the termi nals of the CF card. Image data • The recorded images are store ...
-
Konica Minolta Q-M200 - page 83
Before Calling for Service ● If inspection in accordance with the chart below does not produce a solution, please consult your dealer. ...
-
Konica Minolta Q-M200 - page 84
...
-
Konica Minolta Q-M200 - page 85
Error messages ● When “Err” appears on the remaining number of frames display on the Data displ ay panel on the top of the camera and all of the Data display panel marks blink, an error has occurred. In such cases, follow the instructions given below . 1. Press the power button to tur n the camera off. Now press the power button again to turn ...
-
Konica Minolta Q-M200 - page 86
Main Specifications ● Main Specifications Type Recording medium Resolution*1 : Digital still camera : CompactFlash TM card : Super fine 1600 × 1200 pixels: approx. 11 frames at 8MB. Fine 1600 × 1200 pixels: approx. 20 frames at 8MB. Basic 1152 × 872 pixels: approx. 40 frames at 8MB. Economy 640 × 480 pixels: approx. 80 frames at 8MB. File for ...
-
Konica Minolta Q-M200 - page 87
Exposure control Aperture Light measurement Eye start Flash Flash range : Programmed AE (4.7EV - 16.7EV) Shutter speeds: 1/8 sec. - 1/1000 sec. : Two-step type (F3.2/F9) : Multi area light measurem ent, opposite light auto detect : Built-in type : Built-in automatic flash : approx. 1.0 m-3.0 m Redeye reduction/Auto/On/Off mode selective White balan ...
-
Konica Minolta Q-M200 - page 88
Operating temperature range : 5-45 degrees C Operating humidity range : 20% - 80% RH PC interface : RS-232C serial interface (max. 115.2kbps) LCD monitor : 1.8-inch TFT c olor LCD monitor Playback : Single frame/zoom playback ( × 1, × 2, × 4)/Index playback/Slid e show playback Video output : NTSC/PAL (usable only for pl ayback, canno t be used ...
-
Konica Minolta Q-M200 - page 89
* All values are based on company test c onditions (50% flash use ratio, continuous op- eration, temperature; 23 degrees C). * Battery life will vary depending on the battery brand and grade. *1 The number of images may also vary depending on the type of subject photographed. *2 Economy mode only. *3 Equivalent to 76mm on a 35mm camera. *4 Black &a ...
Do you have a question concerning Konica Minolta Q-M200?
Use the form below
If you did not solve your problem by using a manual Konica Minolta Q-M200, ask a question using the form below. If a user had a similar problem with Konica Minolta Q-M200 it is likely that he will want to share the way to solve it.