English dropdown-ico

Manual Whirlpool WWDC 6400

13 pages Not applicable
Download

Go to site of 13

Summary
  • Whirlpool WWDC 6400 - page 1

    DEFINITION OF USE • Keep these Instructions for Use and the Programme Chart; if you pass on the washing machine to another person, also give him/her Instructions for Use and Programme Chart. This washing machine is exclusively destined to wash and spin machine washable laundry in quantities which are usual for private households. • Observe the ...

  • Whirlpool WWDC 6400 - page 2

    PRECAUTIONS AND RECOMMEND A TIONS 1. Safety instructions • The washing machine is appropriate for indoor use only . • Do not store flammable fluids near the appliance. • Children must not be allowed to play with the washing machine or to climb into the drum. • This appliance is not intended for use by persons (including children) with reduc ...

  • Whirlpool WWDC 6400 - page 3

    T o open the door , hold the door handle and pull the door . Close the door by pressing it without excessive force until it clicks shut. 1. W orktop 2. Control panel 3. Detergent dispenser 4. Service plate (inside the door) 5. Door 6. Pump access with filter and emergency drain hose (if available) behind the plinth 7. Adjustable feet DESCRIPTION OF ...

  • Whirlpool WWDC 6400 - page 4

    GB 4 PREP ARA TION OF THE W ASHING 1. Sort the laundry according to... • T ype of fabric / care label symbol Cottons, mixed fibres, easy care/synthetics, wool, handwash items. • Colour Separate coloured and white items. W ash new coloured articles separately . • Size W ash items of different sizes in the same load to improve washing efficienc ...

  • Whirlpool WWDC 6400 - page 5

    Where to put detergent and additives The detergent drawer has three chambers (picture “ A ” ). Prewash Chamber • Detergent for the prewash Main W ash Chamber • Detergent for the main wash • Stain remover • W ater softener Softener Chamber • Fabric softener • Liquid starch P our additives only up to the “ MAX ” mark. If you use l ...

  • Whirlpool WWDC 6400 - page 6

    W e recommend that you check and clean the filter regularly , at least two or three times a year , especially: • If the “Clean pump” indication lights up: • If the appliance is not draining properly or if it fails to perform spin cycles. If t he wash ing mac hine sta nds in a ro om p ron e to fro st, you have to dra in r esi dual wat er a f ...

  • Whirlpool WWDC 6400 - page 7

    Door seal • Dry the door seal after each washing with an absorbent cotton cloth; make sure that the door seal is completely dry before closing the door of the empty washing machine. • Check the condition of the door seal periodically . Filter • Check and clean the filter regularly , at least two or three times a year (see “Draining Residual ...

  • Whirlpool WWDC 6400 - page 8

    GB 8 TROUBLESHOOTING GUIDE Y our washing machine is equipped with various automatic safety functions. These enable faults to be detected in good time and the safety system can react appropriately . These faults are frequently so minor that they can be removed within a few minutes. Problem Causes - Solutions - Tips Appliance does not start, no indic ...

  • Whirlpool WWDC 6400 - page 9

    GB 9 Failure indication lights up Description - Causes - Solutions “W ater tap closed” Appliance has no or insufficient water supply . The “ Start(P ause) ” light blinks. Check whether: • W ater tap is fully open and water supply pressure is sufficient. • Kinks are present in the water inlet hose. • Mesh filter of water inlet hose is ...

  • Whirlpool WWDC 6400 - page 10

    GB 10 Failure indication lights up Indication on display (if available) Description - Causes - Solutions “Service” from “F03” to “F43” (except “F18” and “F24”) “F24” “F02” or “F A ” “F18” or “Fod” “Electrical module fault” Push the “Reset” button for at least 3 seconds. May appear for very water -soak ...

  • Whirlpool WWDC 6400 - page 11

    GB 11 AFTER -SALES SERVICE Never lift the appliance by the worktop when transporting. 1. Pull out the mains plug. 2. T urn off the tap. 3. Check that machine door and detergent dispenser are properly closed. 4. Disconnect the inlet and drain hoses. 5. Eliminate all water from the hoses and from the appliance (see “Draining Residual W ater/ Cleani ...

  • Whirlpool WWDC 6400 - page 12

    GB 12 For Great Britain only W arning - this appliance must be earthed Fuse replacement If the mains lead of this appliance is fitted with a BS 1363A 13amp fused plug, to change a fuse in this type of plug use an A.S.T .A. approved fuse to BS 1362 type and proceed as follows: 1. Remove the fuse cover ( A ) and fuse ( B ). 2. Fit replacement 13A fus ...

  • Whirlpool WWDC 6400 - page 13

    Noise, ex cessive vibrations and water leakages can be caus ed b y i ncor rect ins tal lati on o f w ashi ng machine. If your washing machine is NOT a built-in model NEVER move the appliance by carrying it at the worktop. REMOVE TRANSPORT BOL TS! (pict.1) Important: - Not removed transport bolts cause damages to the appliance! - Keep the transport ...

Manufacturer Whirlpool Category Washing Machine

Documents that we receive from a manufacturer of a Whirlpool WWDC 6400 can be divided into several groups. They are, among others:
- Whirlpool technical drawings
- WWDC 6400 manuals
- Whirlpool product data sheets
- information booklets
- or energy labels Whirlpool WWDC 6400
All of them are important, but the most important information from the point of view of use of the device are in the user manual Whirlpool WWDC 6400.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Whirlpool WWDC 6400, service manual, brief instructions and user manuals Whirlpool WWDC 6400. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Whirlpool WWDC 6400.

Similar manuals

A complete manual for the device Whirlpool WWDC 6400, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Whirlpool WWDC 6400 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Whirlpool WWDC 6400.

A complete Whirlpool manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Whirlpool WWDC 6400 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Whirlpool WWDC 6400, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Whirlpool WWDC 6400, that we can find in the current document
3. Tips how to use the basic functions of the device Whirlpool WWDC 6400 - which should help us in our first steps of using Whirlpool WWDC 6400
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Whirlpool WWDC 6400
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Whirlpool WWDC 6400 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Whirlpool WWDC 6400?

Use the form below

If you did not solve your problem by using a manual Whirlpool WWDC 6400, ask a question using the form below. If a user had a similar problem with Whirlpool WWDC 6400 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)