English dropdown-ico

Manual Renesas HS1653ECN61H

36 pages 0.35 mb
Download

Go to site of 36

Summary
  • Renesas HS1653ECN61H - page 1

    H8SX/1653 Group E6000 H TFP-120 User System Interface Board HS1653ECN61 H User’s Manual Renesas Micro computer Develo pment Enviro nment Syst em HS1653ECN61 HE Revision Date: Dec. 09, 2005 Rev.2.00 REJ10B0200- 0200 ...

  • Renesas HS1653ECN61H - page 2

    ...

  • Renesas HS1653ECN61H - page 3

    1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party. 2. Renesas Technology Corp ...

  • Renesas HS1653ECN61H - page 4

    ...

  • Renesas HS1653ECN61H - page 5

    I IMPORTANT INFORMATION READ FIRST • READ this user's manual before using this user system interface board. • KEEP the user's manual handy for future reference. Do not atte mpt to use the user syste m interfa ce board until yo u fully understand its mec ha ni s m. User Syst em Interf ace Board : Thro ughout t his d o cume nt , the t e ...

  • Renesas HS1653ECN61H - page 6

    II LIMITED WARRANTY Renesas warrants its user s ystem interface boar ds to be manufactured in accordance with published specific ations and free from defects in material and/or workmanship. Renesas will repair or replace any user system inter face boards determine d to be defective in mater ial and/or workmanship. Us er system interf ace boards are ...

  • Renesas HS1653ECN61H - page 7

    III State Law : Some states do not allo w the exclusion or li mitation of implied warran ties or liab ilit y for incidental or consequential da mages, so the above limitation o r exclusion may not apply to you. Thi s warr an t y give s yo u spec i fic le gal ri ght s, and you ma y ha ve ot her rig hts wh ic h ma y var y fro m state to state. The Wa ...

  • Renesas HS1653ECN61H - page 8

    IV SAFETY PAGE READ FIRST • READ this user's manual before using this user system interface board. • KEEP the user's manual handy for future reference. Do not atte mpt to use the user syste m interfa ce board until yo u fully understand its mec ha ni s m. DEFINITION OF SI GNAL WORDS This is the safety ale rt symbo l. It is used t o al ...

  • Renesas HS1653ECN61H - page 9

    V W ARNING Observe the pr ecautions listed b elow. Failure t o do so will result in a FIRE H AZARD and will damage the us er system and the emul ator product or will r esult in PERSONAL INJURY. The USER PROGRA M will be LOST. 1. Do not repair or remodel the emul ator product by yourself for elect ric shock pre vention and quality assurance. 2. Alwa ...

  • Renesas HS1653ECN61H - page 10

    i Preface The HS1653ECN61H is a us er system interface board that connects a us er system for the H8SX/1653 TFP -120 package to the H8SX/ 1650 E6000H emulator (HS 1650EPH60H). Emulation of the H8SX/1653 group is only poss ible when this user sys tem interface board is connected to the HS1650EP H60H. ...

  • Renesas HS1653ECN61H - page 11

    ii Contents Section 1 Configuration ..................................................................................... 1 Section 2 Connection Procedures ...................................................................... 3 2.1 Connecting User System Interface B oard to User System ................................................ 3 2.1.1 Insta ...

  • Renesas HS1653ECN61H - page 12

    1 Section 1 Configuration Figure 1 and table 1 show the configuration and components of the us er system interface board for the TFP-120 package. Pleas e make sure you have all of thes e components when unpacking. Evaluation chip board Spacer User system interface board User system IC socket Screws (M2 × 12 mm) with flat washers (for fastening cab ...

  • Renesas HS1653ECN61H - page 13

    2 CAUTION Use an IC149-120- 043-B51 socket (m anufactured by YAMAICH I ELECTRONICS Co., Lt d.) for th e TFP-120 package IC socket on the user syst em. Table 1 HS1653ECN61H C omponents No. Component Quantity Remarks 1 User system interface board 1 2 IC socket 1 For the TFP-120 package (to be mounted on the user system) 3 Socket cover 1 For installin ...

  • Renesas HS1653ECN61H - page 14

    3 Section 2 Connection Procedures 2.1 Connecting User System Interface Board to User System W ARNING Always switch OFF the user syst em and the emulator product before the USER SYSTEM INTERFACE BOARD is connected to or removed from any part . Before connecting, make sure that pin 1 on bot h sides are correctly aligned. Failure to do so will result ...

  • Renesas HS1653ECN61H - page 15

    4 To connect the cable head to the user system, follow the ins tructions below. 2.1.1 Installing IC So cket After checking the l ocation of pin 1 on the IC s ocket, apply epoxy resin adhes ive to the bott om of the IC socket for a TF P-120 package, and fasten it t o the user system before s oldering. 2.1.2 Soldering IC Socket After fastening, s old ...

  • Renesas HS1653ECN61H - page 16

    5 2.1.4 Fastening I C Socket Connector CAUTION 1. Use the screwdriver provided for t ightening screws. 2. The tightening torque must be 0.294 N•m or less. If the applied torque cannot be accurately measured, stop tightening when the f orce required to turn t he screw becomes significantly greater th an that needed when first tightening. If a scre ...

  • Renesas HS1653ECN61H - page 17

    6 User system interface board User system Pin 1 Screws (M2 × 12 mm) with flat washers (for fastening cable head) IC socket (IC149-120-043-B51 manufactured by YAMAICHI ELECTRONICS Co., Ltd.) Figure 2 Connecting User System Interface B oard to User System ...

  • Renesas HS1653ECN61H - page 18

    7 2.2 Exchanging th e Spacer of the Evaluation Ch ip Board While the user system interface board is connected to the user system, be careful not to apply load. Exchange the spacer (2.6MP × 10 mm) of the evaluation chip board with another spacer (2.6MP × 25 mm) provided for the user system interface board. Evaluation chip board Spacer (2.6MP × 25 ...

  • Renesas HS1653ECN61H - page 19

    8 2.3 Connecting User System Interface Board to Evaluation Chip Board W ARNING Observe the precautions listed below. Failure to do so will result in a FIRE HAZARD and will damage the user system and the emulator product or will result in PERSONAL INJURY. The USER PROGRAM will be LOST. 1. Always switch OFF the user syst em and the emulator product b ...

  • Renesas HS1653ECN61H - page 20

    9 Connector No. UCN1 UCN1 UCN2 UCN2 User system interface board Evaluation Chip Board Connector No. Board Connector No. Evaluation chip board Figure 4 Connecti ng User System Interface Board to Evaluation C hip Board ...

  • Renesas HS1653ECN61H - page 21

    10 2.4 Recommended Dimensions for User System Mount Pad (Footprint) Figure 5 shows the recommended dimensions for the mount pad (footprint ) for the user sys tem with an IC s ocket for a TFP-120 package (IC149-120-043-B 51: manufactured by YAMA ICHI ELECTRONICS Co., Ltd). Note that the dimensions in figure 5 are somewhat different from those of the ...

  • Renesas HS1653ECN61H - page 22

    11 2.5 Dimensions for Evaluation Chip Board and User System Interface Board The dimensions for the evaluation chip board and the user s ystem interface board are shown in figure 6. Unit: mm Tolerance: ± 0.5 mm 140.0 Evaluation chip board User system interface board 102.5 16.0 118.5 100.0 84.5 69.0 78.5 34.5 Figure 6 Dime nsions for E valuation Ch ...

  • Renesas HS1653ECN61H - page 23

    12 2.6 Resulting Dimensions after Connecting User System Interface Board The resulting dimensions, after connecting the user s ystem interface board to the user sys tem, are shown in figure 7. Unit: mm Tolerance: ±1.0 mm 35.6 16.0 57.6 User system Evaluation chip board IC socket (IC149-120-043-B51 manufactured by YAMAICHI ELECTRONICS Co., Ltd.) 56 ...

  • Renesas HS1653ECN61H - page 24

    13 2.7 Using the Emulator without Connecting User System W ARNING Always switch OFF the user syst em and the emulator product before the USER SYSTEM INTERFACE BOARD is connected to or removed from any part . Before connecting, make sure that pin 1 on bot h sides are correctly aligned. Failure to do so will result in a FIRE HAZARD and will damage th ...

  • Renesas HS1653ECN61H - page 25

    14 P1 SW1 ON USER OFF Figure 8 SW1 Jumper Socket Spacer (2.6MQ x 16 mm) Figure 9 Attaching Spacers ...

  • Renesas HS1653ECN61H - page 26

    15 Section 3 User System Interface Circuits The following user interface circuits are required for the emulator when the user s ystem interface board is in use. Sub-MCU MD control circuit Monitoring circuit LPT16244 MD_CLK Vcc 47 k Ω PM0-PM4 User system VBUS MD_CLK DrVss DrVss PM0-PM4 VBUS DrVcc DrVcc USD- USD- USD+ USD+ Power-supply circuit EPM7 ...

  • Renesas HS1653ECN61H - page 27

    16 P23 P27 P23 P27 SN74CB3Q3306A SN74CB3Q3306A MCU User system Figure 11 User System Interface Circuit (2) MCU User system Sub-MCU P14 P14 SN74CB3Q3306A TXD SN74CB3Q3306A Figure 12 User System Interface Circuit (3) ...

  • Renesas HS1653ECN61H - page 28

    17 MCU VHC244 UHC14 _RES Vcc User system EPM7128 EPM7128 _RES 47 k Ω Figure 13 User System Interface Circuit (4) ...

  • Renesas HS1653ECN61H - page 29

    18 Section 4 Verifying Operation 1. Turn on the emulator according to the procedures described in the H8SX/1650 E6000H Emulator User' s Manual (HS1650EPH 60HE). 2. Verify the user system interface cable connections by checking the pin st ates with the CHECK command (emulator command) and checking the bus states with the FILL command (emulator ...

  • Renesas HS1653ECN61H - page 30

    19  To use the crystal oscillator mounted on the evaluation chip board Install the cry stal o scillato r in to the crystal oscillator terminals on th e evaluation ch ip board. Evaluation chip board Crystal oscillator terminals Crystal oscillator Enlarged view X1 X2 Figure 15 Insta lling the Clock Oscillator ...

  • Renesas HS1653ECN61H - page 31

    20 Section 5 Notice 1. Before connecting any parts or cables, make sure that pin 1 on the both s ides are correctl y aligned. 2. Do not apply excessive force to the user system interface board while it is connected to the user sy stem. 3. The dimensions of the recommended mount pad for the IC socket for this user sys tem interface board are differe ...

  • Renesas HS1653ECN61H - page 32

    21 8. When this emulator is used without connecting to the user s ystem, ensure that t he SW1 jumper pin is inserted to [OFF]. Failure to do so will damage the emulator product, user s ystem interface cable, and user system. 9. To connect the emulator to the user system, ensure that the SW1 jumper pin is ins erted to [ON]. Failure to do so will dam ...

  • Renesas HS1653ECN61H - page 33

    22 Section 6 Restrictions There are the following res trictions on emulation of the H8S X/1653 group when the user s ystem interface board is connected to the emulator. 1. The USB clock frequency is fixed to 48 MHz regardl ess of the EXTA L input. 2. P14 cannot be used as a port if t he serial output function has already been s elected. The port pi ...

  • Renesas HS1653ECN61H - page 34

    Renesas Microcomputer Development Environment System User's Manual H8SX/1653 Group E6000H TFP-120 User System Interface Board HS1653ECN61H Publication Date: Rev.1.00, November 11, 2004 Rev.2.00, December 9, 2005 Published by: Sales Strategic Planning Div. Renesas Technology Corp. Edited by: Customer Support Department Global Strategic Communic ...

  • Renesas HS1653ECN61H - page 35

    Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan http://www.renesas.com Refer to " http://www.renesas.com/en/network " for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500, Fax: <1> (408) ...

  • Renesas HS1653ECN61H - page 36

    2- 6 -2, Ote-machi, Chiyoda-ku, Tokyo, 100-0004, Japan H8SX/1653 Group E6000H TFP-120 User Syste m In terface Board HS1653ECN61H User’s Manual ...

Manufacturer Renesas Category Computer Hardware

Documents that we receive from a manufacturer of a Renesas HS1653ECN61H can be divided into several groups. They are, among others:
- Renesas technical drawings
- HS1653ECN61H manuals
- Renesas product data sheets
- information booklets
- or energy labels Renesas HS1653ECN61H
All of them are important, but the most important information from the point of view of use of the device are in the user manual Renesas HS1653ECN61H.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Renesas HS1653ECN61H, service manual, brief instructions and user manuals Renesas HS1653ECN61H. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Renesas HS1653ECN61H.

Similar manuals

A complete manual for the device Renesas HS1653ECN61H, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Renesas HS1653ECN61H by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Renesas HS1653ECN61H.

A complete Renesas manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Renesas HS1653ECN61H - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Renesas HS1653ECN61H, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Renesas HS1653ECN61H, that we can find in the current document
3. Tips how to use the basic functions of the device Renesas HS1653ECN61H - which should help us in our first steps of using Renesas HS1653ECN61H
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Renesas HS1653ECN61H
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Renesas HS1653ECN61H in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Renesas HS1653ECN61H?

Use the form below

If you did not solve your problem by using a manual Renesas HS1653ECN61H, ask a question using the form below. If a user had a similar problem with Renesas HS1653ECN61H it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)