English dropdown-ico

Manual Sigma CN-WR0412-S1

28 pages Not applicable
Download

Go to site of 28

Summary
  • Sigma CN-WR0412-S1 - page 1

    1 Wireless-N CardBus Adapter Quick Installation Guide Introducing the Wireless-N CardBus Adapter The Wireless-N CardBus Adapter is designed to add 802.11n wireless network to your notebook computer for fast internet access. Features and Benefits • Compliant with 802.11n draft 2.0, 802.11g and 802.11b standards • Supports QoS-WMM, WMM-PS • Sup ...

  • Sigma CN-WR0412-S1 - page 2

    2 Package Contents • Wireless-N CardBus Adapter • Driver CD • Quick Installation Guide Layout Activity LED Flashing: Transferring/receving data Off: No wireless activity Link LED On: Linked to a wireless access point/transferring data Off: No wireless activity Activity LED Link LED Figure 1: Layout ...

  • Sigma CN-WR0412-S1 - page 3

    3 Safety Information In order to keep the safety of users and your properties, please follow the following safety instructions: 1. This wireless network card is designed for indoor use only. DO NOT expose this network card to direct sun light, rain, or snow. 2. DO NOT put this network card at or near hot or humid places, like kitchen or bathroom. A ...

  • Sigma CN-WR0412-S1 - page 4

    4 3. Power on your notebook computer. Note : In most system it is not necessary to turn off the notebook before inserting the cardbus adapter into the cardbus slot. Driver Installation Windows 2000/XP/2003 Server 1. At the Found New Hardware Wizard , click Cancel . 2. Insert the driver CD, Click Start , Run . Type D:CardBussetup.exe , click OK . ...

  • Sigma CN-WR0412-S1 - page 5

    5 Windows Vista ™ 1. At the Found New Hardware window, click Cancel . 2. Insert the driver CD. Click Start , in the Start Search box, type D:CardBussetup.exe , press Enter . (Change the D: to match your CD-ROM drive letter) 3. Click Allow . 4. Choose I accept the terms of the license agreement , then click Next . 5. Choose Install driver and Ra ...

  • Sigma CN-WR0412-S1 - page 6

    6 If you stopped config utility by Exit function, you will not be able to maintain the wireless link to the access point you wish to use. In this case, you can start config utility again by clicking Start, All Programs, Ralink Wireless , Ralink Wirelss Utility . Connecting to Wireless Access Point After the driver is correctly installed, it will tr ...

  • Sigma CN-WR0412-S1 - page 7

    7 Figure 3 2. Configuration utility will scan for all wireless access points automatically. Scan results will be displayed here, please check if the wireless access point with the SSID (the name of wireless access point) you preferred is shown in Figure 4 . If the wireless access point you wish to connect does not show here, please click Rescan to ...

  • Sigma CN-WR0412-S1 - page 8

    8 3. Click the wireless access point or network device you wish to connect to, then click Connect , shown in Figure 5 below. Figure 5 The non-encrypted access point (The Encryption field indicate None) will connected within one minute. Please jump to step 5 on page 9 if the access point you selected enables encryption, otherwise proceed to next ste ...

  • Sigma CN-WR0412-S1 - page 9

    9 If the wireless access point you selected have SSID, please skip this step, shown in Figure 6 . Figure 6 5. If the wireless access point uses encryption, you have to input WEP passphrase or WPA preshared key. Shown on Figure 7 , please ask the owner of the wireless access point to obtain the correct passphrase/preshared key and enter here, then c ...

  • Sigma CN-WR0412-S1 - page 10

    10 6. You’ll see Connected <-> SSID (SSID is the SSID of the wireless access point or wireless device you connected to) message displayed at lower-left corner of configuration utility, congratulations, you’re successfully connected to the access point or wireless device you selected, shown in Figure 8 . Figure 8 SSID : The Service Set IDe ...

  • Sigma CN-WR0412-S1 - page 11

    11 Signal : Shows the signal strength of access point or wireless device. Larger number means better radio strength. Channel : Shows the channel number that access point or wireless device uses. Encryption : Shows the encryption method that access point or wireless device uses. If the wireless access point does not enable encryption, you’ll see N ...

  • Sigma CN-WR0412-S1 - page 12

    12 Using Windows Zero Configuration Windows XP and Vista has a built-in wireless network configuration utility called Windows Zero Configuration (WZC). You can use WZC to configure your wireless network adapter. 1. Right-click Ralink configuration utility icon and select Use Zero Configuration as Configuration utility, shown in Figure 9. Figure 9 2 ...

  • Sigma CN-WR0412-S1 - page 13

    13 Figure 10 5. All wireless access points in proximity will be displayed here. If the access point you want to use is not displayed here, please move your computer closer to the access point, or you can click Refresh network list to rescan access points. Click the access point you want to use if it’s shown, then click Connect, shown in Figure 11 ...

  • Sigma CN-WR0412-S1 - page 14

    14 7. If you can see Connected message, the connection between your computer and wireless access point is successfully established. Soft-AP Function In addition to being a wireless client of other wireless access points, this wireless card can act as a wireless service provider. You can switch this wireless card’s operating mode to AP mode to sim ...

  • Sigma CN-WR0412-S1 - page 15

    15 After you select Switch to AP Mode , the Ralink utility icon will indicated the wireless card is operating in AP mode now. If you want to switch the wireless card back to station mode (become a client of other wireless access points), click Switch to Station Mode . Config Figure 13 SSID : Please input the SSID (the name used to identify this wir ...

  • Sigma CN-WR0412-S1 - page 16

    16 Channel : Please select the wireless channel you wish to use. The number of channels available here will vary depends on the setting of Country Region Code . Wireless Mode : Please select the wireless operating mode. You can limit the type of wireless client to 802.11b or 802.11g only, or allow 802.11b/g, and 802.11b/g/n clients. It’s safe to ...

  • Sigma CN-WR0412-S1 - page 17

    17 2 : SPAIN 3 : FRANCE 4 : MKK 5 : MKKI (TELEC) 6 : ISRAEL (Channel 3 to 9) 7 : ISRAEL (Channel 5 to 13) Beacon(ms) : You can define the time interval that a beacon signal should be send. Default value is 100. Do not modify this value unless you know what will be affected. Idle Time : Select the idle time of your wireless network card. Default val ...

  • Sigma CN-WR0412-S1 - page 18

    18 Security Settings This wireless card supports wireless encryption in AP mode, which will encrypt the data being transferred over the air to enhance data security level. It’s recommended to enable data encryption unless you wish to open your computer (and its internet connection) to the public. When you click Security Setting in Ralink configur ...

  • Sigma CN-WR0412-S1 - page 19

    19 Encryption Type : Please select an encryption mode. The available options in this setting item will vary depending on the authentication type you select. If you select Not Use , data will not be encrypted and people with some networking knowledge will be able to read the data you transfer with proper tool. Note : WPA encryption is safer than WEP ...

  • Sigma CN-WR0412-S1 - page 20

    20 If you want to use WEP 64 bit encryption, please input 10 characters; if you select HEX, or input 5 characters if you select ASCII; If you want to use WEP 128bit encryption, please input 26 characters if you select HEX, or input 13 characters if you select ASCII. 128 bit encryption is safer then 64 bit, but the data transfer speed will be slight ...

  • Sigma CN-WR0412-S1 - page 21

    21 Figure 15 Access Policy : Select the policy type of your access rule: Disable :Allow any wireless client with proper authentication settings to connect to this access point. Allow All : Only allow wireless clients with MAC address listed here to connect to this access point. Reject All: Reject wireless clients with MAC address listed here to be ...

  • Sigma CN-WR0412-S1 - page 22

    22 Mac Table Show the list all wireless clients connected to this access point, shown in Figure 16. Figure 16 MAC Address : Displays the MAC address of this wireless client. AID : The serial number of this wireless connection. Power Saving Mode : Displays the capability of power saving function of this wireless client. Status : Displays additional ...

  • Sigma CN-WR0412-S1 - page 23

    23 Event Log This software access point will log all wireless-related activities as a log, shown in Figure 17 . Figure 17 You can click Clear to remove all entries in the log. ...

  • Sigma CN-WR0412-S1 - page 24

    24 Statistics This page shows detailed information about how your software access point works, shown in Figure 18 . Figure 18 You can click RESET COUNTERS button to reset all counters to zero. ...

  • Sigma CN-WR0412-S1 - page 25

    25 Blank Page ...

  • Sigma CN-WR0412-S1 - page 26

    26 Blank Page ...

  • Sigma CN-WR0412-S1 - page 27

    27 Technical Support and Warranty QUESTIONS? SIIG ’ s Online Support has answers! Simply visit our web site at www.siig.com and click Support . Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away. You can also submit questions online and a technical support analyst ...

  • Sigma CN-WR0412-S1 - page 28

    About SIIG, Inc. Founded in 1985, SIIG, Inc. is a leading computer upgrade manufacturer of I/O connectivity products, including PCI & ISA serial and parallel ports, USB, Serial ATA & UltraATA controllers, FireWire (1394a/b), networking, sound cards, and other accessories. SIIG is the premier one-stop source of upgrades. SIIG products offer ...

Manufacturer Sigma Category Network card

Documents that we receive from a manufacturer of a Sigma CN-WR0412-S1 can be divided into several groups. They are, among others:
- Sigma technical drawings
- CN-WR0412-S1 manuals
- Sigma product data sheets
- information booklets
- or energy labels Sigma CN-WR0412-S1
All of them are important, but the most important information from the point of view of use of the device are in the user manual Sigma CN-WR0412-S1.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Sigma CN-WR0412-S1, service manual, brief instructions and user manuals Sigma CN-WR0412-S1. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Sigma CN-WR0412-S1.

Similar manuals

A complete manual for the device Sigma CN-WR0412-S1, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Sigma CN-WR0412-S1 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Sigma CN-WR0412-S1.

A complete Sigma manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Sigma CN-WR0412-S1 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Sigma CN-WR0412-S1, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Sigma CN-WR0412-S1, that we can find in the current document
3. Tips how to use the basic functions of the device Sigma CN-WR0412-S1 - which should help us in our first steps of using Sigma CN-WR0412-S1
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Sigma CN-WR0412-S1
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Sigma CN-WR0412-S1 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Sigma CN-WR0412-S1?

Use the form below

If you did not solve your problem by using a manual Sigma CN-WR0412-S1, ask a question using the form below. If a user had a similar problem with Sigma CN-WR0412-S1 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)