English dropdown-ico

Manual TOA Electronics C-CC714 NT

32 pages 2.7 mb
Download

Go to site of 32

Summary
  • TOA Electronics C-CC714 NT - page 1

    Thank you for purchasing TOA’s Outdoor Combination Camera. Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment. OUTDOOR COMBINA TION CAMERA C-CC714 NT C-CC714 PL C-CC764 NT C-CC764 PL INST ALLA TION MANUAL ...

  • TOA Electronics C-CC714 NT - page 2

    2 T ABLE OF CONTENTS 1. SAFETY PRECAUTIONS ............................................................................... 3 2. GENERAL DESCRIPTION ............................................................................. 5 3. FEA TURES .......................................................................................................... 5 ...

  • TOA Electronics C-CC714 NT - page 3

    3 1. SAFETY PRECAUTIONS • Be sure to read the instructions in this section carefully before use. • Make sure to observe the instructions in this manual as the conventions of safety symbols and messages regarded as very important precautions are included. • We also recommend you keep this instruction manual handy for future reference. Safety S ...

  • TOA Electronics C-CC714 NT - page 4

    4 When Installing the Unit • Avoid installing the unit in locations exposed to sea breeze or corrosive gas. Mounts may become corroded, eventually causing the unit to fall off, which could result in personal injury. • Do not mount the unit in locations exposed to constant vibration. The mounting screws and/or bolts may be loosened by excessive ...

  • TOA Electronics C-CC714 NT - page 5

    5 2. GENERAL DESCRIPTION TOA’s dome-type color cameras combine with a high-speed camera drive that permits one 360-degree horizontal rotation per second and a 22 times (C-CC714) or a 23 times (C-CC764) optical zoom lens. Up to 255 arbitrary positions can be preset and such preset positions can be instantaneously repeated. The systems also feature ...

  • TOA Electronics C-CC714 NT - page 6

    6 4. HANDLING PRECAUTIONS • Noise may appear on the monitor or preset camera positions may deviate with prolonged camera use. In such cases, use the camera’s refresh function to automatically refresh settings and reestablish the home position once a day or week, thus allowing any position deviation to be corrected. When correcting manually, ini ...

  • TOA Electronics C-CC714 NT - page 7

    7 • The dome camera features built-in heat generating circuitry. Take care not to touch the internal parts marked “Caution! High Temperature” when working inside the camera during dome cleaning or maintenance . • Avoid directly touching the dome surface, since camera picture quality could deteriorate if the dome cover becomes smudged and di ...

  • TOA Electronics C-CC714 NT - page 8

    8 1 2 3 4 5 6 [ Housing Appearance ] 13 14 15 16 18 19 17 20 19 10 12 9 9 9 9 11 11 7 8 9 9 [ Housing Bottom ] [ Camera Unit Top ] [ Camera Unit Bottom ] 5. NOMENCLA TURE [ Appearance ] [ Camera Unit Appearance ] ...

  • TOA Electronics C-CC714 NT - page 9

    (1) Top cover (2) Safety wire for housing (3) Housing adaptor (4) Safety screw (5) Dome cover (6) Decorative frame (7) Sunshade (Outside) (8) Case (Inside) (9) Hexagon sleeve (10) Safety wire for dome cover (11) Camera unit fixing screw (12) Surge protector GND (13) COM SW* (14) COM LED* (15) COM PORT* (16) DIP switch (SW1) (17) DIP switch (SW2) (1 ...

  • TOA Electronics C-CC714 NT - page 10

    10 6.1. Precautions When Installing the Camera • Insulate the joint of the camera video output cable and the coaxial cable from other equipment by wrapping the (vinyl) insulating tape around it. Also, install such cables taking care that they do not contact metal stuff close to them. • Avoid install the camera cable in close proximity to other ...

  • TOA Electronics C-CC714 NT - page 11

    11 GND GND Connect to the next cameraʼs terminal Camera control cable Camera control cable Shield twisted pair cable Connect to remote controller ʼs camera control terminal 6.2. Camera Control Connector Connection (RS-485) • Connect terminals (+) and (–) of the C-RM500 Remote Controller or the C-IF500 Interface Unit to the camera's termi ...

  • TOA Electronics C-CC714 NT - page 12

    7.3.1. Camera Address Setting Switch (DIP Switch 1: No. 1 – 8) Used to set camera address when using the camera in connection with the C-RM500 Remote Controller. Set the DIP switch so that the address is equal to the connected switcher's channel number. The relationship between switch settings and camera addresses are shown on page 14. (Fact ...

  • TOA Electronics C-CC714 NT - page 13

    13 7.3.5. Termination Switch (DIP switch 2: No. 8) Set the switch of the camera last connected to the RS-485 communications line to ON. (Factory setting: OFF) 7.3.2. Communication Speed Setting Switch (DIP switch 2: No. 1 – 2) Check to be sure that the communication speed set here is the same as that of the Remote Controller. When changing the sp ...

  • TOA Electronics C-CC714 NT - page 14

    14 ON 12345678 11 7 3 3 4 9 ON 12345678 ON 12345678 ON 12345678 ON 12345678 21 8 3 4 5 0 ON 12345678 ON 12345678 ON 12345678 ON 12345678 31 9 3 5 5 1 ON 12345678 ON 12345678 ON 12345678 ON 12345678 42 0 3 6 5 2 ON 12345678 ON 12345678 ON 12345678 ON 12345678 52 1 3 7 5 3 ON 12345678 ON 12345678 ON 12345678 ON 12345678 62 2 3 8 5 4 ON 12345678 ON 12 ...

  • TOA Electronics C-CC714 NT - page 15

    15 ON 12345678 65 81 97 1 13 ON 12345678 ON 12345678 ON 12345678 ON 12345678 66 82 98 1 14 ON 12345678 ON 12345678 ON 12345678 ON 12345678 67 83 99 1 15 ON 12345678 ON 12345678 ON 12345678 ON 12345678 68 84 100 1 16 ON 12345678 ON 12345678 ON 12345678 ON 12345678 69 85 101 1 17 ON 12345678 ON 12345678 ON 12345678 ON 12345678 70 86 102 1 18 ON 12345 ...

  • TOA Electronics C-CC714 NT - page 16

    16 ON 12345678 129 145 161 177 ON 12345678 ON 12345678 ON 12345678 ON 12345678 130 146 162 178 ON 12345678 ON 12345678 ON 12345678 ON 12345678 131 147 163 179 ON 12345678 ON 12345678 ON 12345678 ON 12345678 132 148 164 180 ON 12345678 ON 12345678 ON 12345678 ON 12345678 133 149 165 181 ON 12345678 ON 12345678 ON 12345678 ON 12345678 134 150 166 182 ...

  • TOA Electronics C-CC714 NT - page 17

    17 ON 12345678 193 209 225 241 ON 12345678 ON 12345678 ON 12345678 ON 12345678 194 210 226 242 ON 12345678 ON 12345678 ON 12345678 ON 12345678 195 21 1 227 243 ON 12345678 ON 12345678 ON 12345678 ON 12345678 196 212 228 244 ON 12345678 ON 12345678 ON 12345678 ON 12345678 197 213 229 245 ON 12345678 ON 12345678 ON 12345678 ON 12345678 198 214 230 24 ...

  • TOA Electronics C-CC714 NT - page 18

    18 8.1. About Installation • Mount the camera to a heavy-duty wall surface using the optional C-BC711W Wall Mounting Bracket. • When installing the camera on a pole, use the optional C-BC711W Wall Mounting Bracket, C-BC711PM Pole Mounting Bracket and 2 YS-60B Mounting Bands in combination. • Mount the camera to a heavy-duty ceiling surface us ...

  • TOA Electronics C-CC714 NT - page 19

    19 8.3. W all Mounting Bracket Installation Use the optional C-BC711W Wall Mounting Bracket. Notes • Check to be sure that wall surface can structurally support the weight of the camera and mounting bracket • Bolts, nuts and washers are not supplied with the bracket. Use bolts, nuts and washers that are appropriate for the wall's structure ...

  • TOA Electronics C-CC714 NT - page 20

    20 8.4. Attaching Housing and Camera Unit to W all Mounting Bracket 1. Loosen 2 safety screws. 2. Run the safety wire through the top cover, then hang the hook to the mounting bracket. 3. Run the top cover through the pipe, then connect cables. T op cover W all surface Safety wire Housing Insulate the terminals by wrapping the (vinyl) insulating ta ...

  • TOA Electronics C-CC714 NT - page 21

    21 5. Using the 3 supplied camera mounting screws M5 x 12, attach the housing unit to pipe. Tighten 3 screws equally and ensure that no parts rattle. Note: In this event, tighten screws while pressing the housing against the pipe. 4. After confirming the housing direction, push the housing up, then tighten 2 safety screws. T op cover Safety screw S ...

  • TOA Electronics C-CC714 NT - page 22

    22 7. Connect the safety wire to the housing projection, then attach the camera unit. Note: Align mark of the camera unit with that of the housing when attaching the camera unit to the housing. Hang the safety wire. Safety wire mark 6. Using the supplied 3 hexagon socket screws, attach the top cover 1 to the housing. Hexagon socket screw M4 x 8 (su ...

  • TOA Electronics C-CC714 NT - page 23

    23 8. Make the camera unit in horizontal position and push it straight up closely to the housing. Cross sectional view of the housing Camera unit 1 2 mark Duct Note Insert the camera unit in an oblique direction in the order of 1 to 2 keeping away from the duct of the housing. Push the camera unit straight up closely to the housing. Screw section i ...

  • TOA Electronics C-CC714 NT - page 24

    24 Safety wire protrudes from the compartment. Safety wire does not protrude from the compartment. Note When mounting the camera unit to the housing, mount it straight till it is attached to the housing correctly. Mounting it at an angle may cause damage to the camera unit. Cross sectional view of the housing Camera unit Mount straight Cross sectio ...

  • TOA Electronics C-CC714 NT - page 25

    25 10. Tighten 2 camera unit mounting screws to attach the camera unit to the base unit. Camera unit mounting screw Camera unit mounting screw 11. Attach the dome cover. Slide down the dome cover’s screw head through the housing suspension fitting’s slot. Hang 9. Rotate the camera unit until it locks into place. ...

  • TOA Electronics C-CC714 NT - page 26

    26 13. Tighten 4 screws equally to attach the dome cover to the housing and ensure that the dome cover does not rattle. 12. Align the dome cover’s 4 screws with the hexagon head sleeves inside the housing. Note Be sure to attach the dome cover after sliding down its screw head through the housing suspension fitting’s slot so that the dome cover ...

  • TOA Electronics C-CC714 NT - page 27

    27 8.5. Pole Mounting Bracket Installation The optional C-BC711PM Pole Mounting Bracket, C-BC711W Wall Mounting Bracket and YS-60B Mounting Band are required to mount the camera on a pole. Note Those mounting brackets and band can be installed on a pole having a mounting pipe diameter of 90 - 340 mm. Be sure to use 2 mounting bands. If mounting ban ...

  • TOA Electronics C-CC714 NT - page 28

    28 8.6. Suspension Bracket Installation The C-BC711P Suspension Bracket is required to suspend the camera from a ceiling. Note Mount the bracket to a concrete wall or robustly constructed wall surface that can sufficiently withstand the weight of the units. 1. Make a cable entry hole of ø 50 – 100mm on a ceiling. Hole diameter: ø 50 – 100mm C ...

  • TOA Electronics C-CC714 NT - page 29

    29 [ RS-485 Communications line control ] Combination camera Multi-switcher Monitor TV Outdoor combination camera Dedicated Remote controller Note Combination cameras and outdoor combination cameras can be used in free combinations. When a camera (fixed installation* 1 ) is used in combinations, the corresponding camera screens can be controlled by ...

  • TOA Electronics C-CC714 NT - page 30

    30 C-CC764 NT C-CC764 PL 24 V AC, 50/ 60 Hz (2P loose end) 10 W (normal operation), 80 W max. RS-485 communications system (new protocol compatible) VBS 1.0 V(p-p), 75 Ω , BNC-R jack RS-485 camera control connector, multi-pair cable 8P loose end (3P out of 8P) 3-channels, no-voltage make contact input, open voltage: 18 V DC, short-circuit current ...

  • TOA Electronics C-CC714 NT - page 31

    31 C-CC714 NT C-CC714 PL 24 V AC, 50/ 60 Hz (2P loose end) 10 W (normal operation), 80 W max. RS-485 communications system (new protocol compatible) VBS 1.0 V(p-p), 75 Ω , BNC-R jack RS-485 camera control connector, multi-pair cable 8P loose end (3P out of 8P) 3-channels, no-voltage make contact input, open voltage: 18 V DC, short-circuit current ...

  • TOA Electronics C-CC714 NT - page 32

    • Accessories CD-R (CAMARA CONTROLLER Software, installation manual) ...... 1 Hexagon socket screw M4 x 8 ............................................................ 3 • Optional Products Wall Mounting Bracket: C-BC711W Suspension Bracket: C-BC711P Pole Mounting Bracket: C-BC711PM Mounting Band: YS-60B Smoked dome cover: C-A711DM Printed in Ja ...

Manufacturer TOA Electronics Category Film Camera

Documents that we receive from a manufacturer of a TOA Electronics C-CC714 NT can be divided into several groups. They are, among others:
- TOA Electronics technical drawings
- C-CC714 NT manuals
- TOA Electronics product data sheets
- information booklets
- or energy labels TOA Electronics C-CC714 NT
All of them are important, but the most important information from the point of view of use of the device are in the user manual TOA Electronics C-CC714 NT.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals TOA Electronics C-CC714 NT, service manual, brief instructions and user manuals TOA Electronics C-CC714 NT. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product TOA Electronics C-CC714 NT.

Similar manuals

A complete manual for the device TOA Electronics C-CC714 NT, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use TOA Electronics C-CC714 NT by users. Manuals are usually written by a technical writer, but in a language understandable to all users of TOA Electronics C-CC714 NT.

A complete TOA Electronics manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual TOA Electronics C-CC714 NT - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the TOA Electronics C-CC714 NT, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the TOA Electronics C-CC714 NT, that we can find in the current document
3. Tips how to use the basic functions of the device TOA Electronics C-CC714 NT - which should help us in our first steps of using TOA Electronics C-CC714 NT
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with TOA Electronics C-CC714 NT
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of TOA Electronics C-CC714 NT in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning TOA Electronics C-CC714 NT?

Use the form below

If you did not solve your problem by using a manual TOA Electronics C-CC714 NT, ask a question using the form below. If a user had a similar problem with TOA Electronics C-CC714 NT it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)