English dropdown-ico

Manual Allen & Heath dLive DX32

12 pages Not applicable
Download

Go to site of 12

Summary
  • Allen & Heath dLive DX32 - page 1

    DX Expander G etting Started Guide DX32  Before starting please check www.allen-heath.com for the latest dLive firmware and documentation. AP 10242 ...

  • Allen & Heath dLive DX32 - page 2

    DX Expander Getting Started Guide 2 AP 10242 Issue 1 dLive products comply with t he European Electromagnetic Compatibility directive 2004/108/EC and the European Low V oltage directive 2006/95/EC. Any changes or modifications to the p roduct not approved by Allen & Heath could void the compliance o f the product and therefore the user’s auth ...

  • Allen & Heath dLive DX32 - page 3

    DX Expander Getting Started Guide 3 AP 10242 Issue 1 IMPORT ANT - Read b efore starting Safety instructions Before starting, read the Important Safety Instructions printed on the sheet supplied with the equipment. For your own safety and that of the op erator, technical crew and performers, follow all instructions and heed all warnings printed on t ...

  • Allen & Heath dLive DX32 - page 4

    DX Expander Getting Started Guide 4 AP 10242 Issue 1 P acked items Check you have received the following:  DX 32 expander  Getting Started Guide AP 10242  Safety Sheet  IEC mains lead  4x M6 screws and washers for rack mounting Contents IMPORTANT - Read before starting ................................................................. ...

  • Allen & Heath dLive DX32 - page 5

    DX Expander Getting Started Guide 5 AP 10242 Issue 1 1. Introduction dLive is a distributed digital mixing system providing a uniquely flexible solution for any live sou nd application. It se parates the mi x engine from the contr ol surface, putting the audio and processing where it is needed, and offering a host of control and audio networking po ...

  • Allen & Heath dLive DX32 - page 6

    DX Expander Getting Started Guide 6 AP 10242 Issue 1 2. Installing the Ex pander 2.1 Free standing The Expander can be operated as a freestanding unit for shelf or floor use. It can be operated horizontally with the c onnectors facing upward or sideward. C heck that its plastic feet are fitted in the intended position.  Ensure adequate air flow ...

  • Allen & Heath dLive DX32 - page 7

    DX Expander Getting Started Guide 7 AP 10242 Issue 1 3. Front P anel I/O modules – 4x slots for fitting 8ch analogue or digital I/O modules. To fit a module, switch the expander off, remove the bl ank panel by loosening the 2 thumb screws, slide th e module into the slot a nd press it fi rmly into the mating connector, then secure it by tightenin ...

  • Allen & Heath dLive DX32 - page 8

    DX Expander Getting Started Guide 8 AP 10242 Issue 1 4. Rear P anel Plastic feet – Remova ble plastic feet. Use a flat-head screwdriver to remove or reposition the plastic feet. Kensington Lock - A slo t for fitting standard Kensington anti-theft sec urity devices. Fan – Ultra-quiet fan. Make sure the ventilation opening is not obstructed. 1 2 ...

  • Allen & Heath dLive DX32 - page 9

    DX Expander Getting Started Guide 9 AP 10242 Issue 1 5. I/O Modules M-AIN - Recalla ble preamps for balanced or unbalanced microphone and line level signals. Gain, Pad and 48V are digitally co ntrolled wit hin the preamp. The PP indicator l ights up whe n p hantom power volta ge is detected at the socket, whether internally or externally sourced. M ...

  • Allen & Heath dLive DX32 - page 10

    DX Expander Getting Started Guide 10 AP 10242 Issue 1 6. Connect and po wer up 6.1 MixRack connection Plug a touring grade CAT5e (or hi gher specification) ca ble up to 100m long between t he DX Expander and Mi xRack DX ports. Use two cables for redundancy if required. Use ports DX1-2 on the MixRack for the first Expander, ports DX3-4 for a second ...

  • Allen & Heath dLive DX32 - page 11

    DX Expander Getting Started Guide 11 AP 10242 Issue 1 7. Dimensions 481.60 433.00 311.00 289.00 24.30 465.10 101.60 177.00 ...

  • Allen & Heath dLive DX32 - page 12

    DX Expander Getting Started Guide 12 AP 10242 Issue 1 8. T echnical specs Inputs System Mic/Line XLR In puts Balanced XLR, +48V phantom po wer Sampling Rate 96kHz +/- 20 PPM Mic/Line Preamp Fully recallable ADC 24 -bit Delta-Sigma Input Sensitivit y -60 to +15dBu DAC 24 -bit Delta-Sigma Analogue Gain +5 to +60dB, 1dB ste ps Pad -20dB Active PAD Lat ...

Manufacturer Allen & Heath Category Mixer

Documents that we receive from a manufacturer of a Allen & Heath dLive DX32 can be divided into several groups. They are, among others:
- Allen & Heath technical drawings
- dLive DX32 manuals
- Allen & Heath product data sheets
- information booklets
- or energy labels Allen & Heath dLive DX32
All of them are important, but the most important information from the point of view of use of the device are in the user manual Allen & Heath dLive DX32.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Allen & Heath dLive DX32, service manual, brief instructions and user manuals Allen & Heath dLive DX32. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Allen & Heath dLive DX32.

Similar manuals

A complete manual for the device Allen & Heath dLive DX32, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Allen & Heath dLive DX32 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Allen & Heath dLive DX32.

A complete Allen & Heath manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Allen & Heath dLive DX32 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Allen & Heath dLive DX32, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Allen & Heath dLive DX32, that we can find in the current document
3. Tips how to use the basic functions of the device Allen & Heath dLive DX32 - which should help us in our first steps of using Allen & Heath dLive DX32
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Allen & Heath dLive DX32
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Allen & Heath dLive DX32 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Allen & Heath dLive DX32?

Use the form below

If you did not solve your problem by using a manual Allen & Heath dLive DX32, ask a question using the form below. If a user had a similar problem with Allen & Heath dLive DX32 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)