English dropdown-ico

Manual Hoover WindTunnelTM

13 pages 0.98 mb
Download

Go to site of 13

Summary
  • Hoover WindTunnelTM - page 1

    Self-Propelled W indTunnel ™ by HOOVER Congratulations on your purchase! This WindTunnel ™ vacuum cleaner takes HOOVER ® T ype “Y” Allergen Filtration filter bags This product was designed for easy Assembly (See page 3) ...

  • Hoover WindTunnelTM - page 2

    Fill in and retain The model and serial number are located on the back of the handle as shown. For your personal records, please enter the COMPLETE model and serial number in the spaces provided and retain this information. Your cleaner is model___________________________________ and has serial number___________________________________ It is sugges ...

  • Hoover WindTunnelTM - page 3

    3 1. Assembling cleaner Carton contents Remove all parts from carton and identify each item shown. Make sure all parts are located before disposing of packing. A. Handle screws (in bag with owner’ s manual) B. Hose, cleaning tools and wands C. Handle D. Cleaner 1-1 A B C D This cleaner was inspected and packaged carefully before being shipped fro ...

  • Hoover WindTunnelTM - page 4

    Place smaller diameter end of wand, into bottom of rack. Snap wand into clip at the top. Repeat with other wand. STEP II Attach hose 1-5 1-8 1-9 1-6 1-7 Align end of hose with projection (E) over slots (F) in dirt duct on back of handle. Slide hose into (F) and twist hose to lock it into place. Position hose over rack and into hose tube (G). Open t ...

  • Hoover WindTunnelTM - page 5

    14. Brush roll control: slide control to “Carpet” for cleaning with brush r oll ON or to “Hard” for cleaning with brush roll OFF . 15.Carpet height control: slide knob to cor r ect setting for height of carpet being cleaned. 16.Headlight 17.‘Dirt FINDER’display* 18.Embedded Dirt FIND- ER TM sensitivity switch* 19. Check bag indicator* 2 ...

  • Hoover WindTunnelTM - page 6

    2 - 9 Brush roll control Note: When handle is in upright posi- tion, brush roll is automatically OFF. Move the brush roll control only when the handle is in the upright position. Slide control to “Carpet” to turn brush r oll ON for cleaning carpet or rugs. Slide control to “Hard” to turn brush roll OFF when cleaning bare floors. Automatic b ...

  • Hoover WindTunnelTM - page 7

    7 indicator (some models only) When red is in the OFF window, brush r oll is STOPPED. When red is in the ON window brush roll is ROT A TING. Cleaning lightweight 2 - 1 0 2 - 1 1 2 - 1 2 2 - 1 3 flexible rugs St and on one end of rug and move cl eaner to ward other end or edg e. B e f o r e rea ching edge, pu sh down on ha ndle. This will li ft up t ...

  • Hoover WindTunnelTM - page 8

    3 - 1 8 2 - 1 9 Changing filter bag Disconnect cleaner from electrical outlet. H Where to buy Filter bags may be purchased from Authorized Hoover Dealers (Depot), Leading Retailers, from Hoover Factor y Service Centers, or through The Hoover Company on-line at www.hoover.com. What to buy T o assure cleaning effectiveness, use only Genuine HOOVER® ...

  • Hoover WindTunnelTM - page 9

    How to reattach filter door The filter door is designed with a “break-away“ feature which allows it to snap free if it is pushed open too far . T o reattach, align hinges (C) of cover with slots on sides of filter area. Press door back into place. Check brush roll chan - nels Because your WindTunnel cleaner picks up so well, we strongly recom - ...

  • Hoover WindTunnelTM - page 10

    3 - 1 2 3 - 1 3 3 - 1 1 D C 3 - 9 3 - 1 0 Belt replacement The belts are located under the bottom plate of the cleaner and should be checked from time to time to be sur e they are in good condition. The flat (wide) belt is described below; the other is described under “Brush roll r eplacement”. When to replace Disconnect cleaner from electrical ...

  • Hoover WindTunnelTM - page 11

    Installing brush roll Grasp brush roll and fit it into position by first sliding end, opposite the belt, into the rectangular slot (G) on side of clean - er . Push other side of brush roll (H) into place. Belt may fit loosely when proper - ly installed. Reposition flat belt and bottom plate (Figs. 3-12 and 3-13). Replacing brush roll Removing brush ...

  • Hoover WindTunnelTM - page 12

    Possible Cause Possible Solution • Incorrect carpet height setting • Move carpet height control to a higher setting Problem: Cleaner won’t run P ro bl e m : Cleaner / tools won’t pick up Possible Cause Possible Solution • Broken or worn belt(s) • Replace belt(s) • Brush roll worn • Replace brush roll • Filter bag full • Change f ...

  • Hoover WindTunnelTM - page 13

    13 Full One Year W arranty (Domestic Use) Y our HOOVER® appliance is warranted in normal household use, in accordance with the Owner ’ s Manual against original defects in material and workmanship for a period of one full year from date of purchase. This warranty provides, at no cost to you, all labor and parts to place this appliance in cor r e ...

Manufacturer Hoover Category Vacuum Cleaner

Documents that we receive from a manufacturer of a Hoover WindTunnelTM can be divided into several groups. They are, among others:
- Hoover technical drawings
- WindTunnelTM manuals
- Hoover product data sheets
- information booklets
- or energy labels Hoover WindTunnelTM
All of them are important, but the most important information from the point of view of use of the device are in the user manual Hoover WindTunnelTM.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Hoover WindTunnelTM, service manual, brief instructions and user manuals Hoover WindTunnelTM. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Hoover WindTunnelTM.

Similar manuals

A complete manual for the device Hoover WindTunnelTM, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Hoover WindTunnelTM by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Hoover WindTunnelTM.

A complete Hoover manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Hoover WindTunnelTM - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Hoover WindTunnelTM, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Hoover WindTunnelTM, that we can find in the current document
3. Tips how to use the basic functions of the device Hoover WindTunnelTM - which should help us in our first steps of using Hoover WindTunnelTM
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Hoover WindTunnelTM
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Hoover WindTunnelTM in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Hoover WindTunnelTM?

Use the form below

If you did not solve your problem by using a manual Hoover WindTunnelTM, ask a question using the form below. If a user had a similar problem with Hoover WindTunnelTM it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)