English dropdown-ico

Manual Asus P4B266-E

142 pages 7.96 mb
Download

Go to site of 142

Summary
  • Asus P4B266-E - page 1

    Motherboard ® P4B266-E User Guide ...

  • Asus P4B266-E - page 2

    ii Checklist Copyright © 2002 ASUST eK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes ...

  • Asus P4B266-E - page 3

    iii Features Contents FCC/CDC statements ..................................................................... vi Safety information .......................................................................... vi i About this guide ............................................................................ viii How this guide is organized .......... ...

  • Asus P4B266-E - page 4

    iv Safeguards Contents 2.6 Expansion slots ................................................................. 2-13 2.6.1 Installing an expansion card .................................. 2-13 2.6.2 Configuring an expansion card ............................. 2-13 2.6.3 PCI slots ............................................................... 2-15 2.6.4 ...

  • Asus P4B266-E - page 5

    v Contents Chapter 5: Software support ............................................... 5- 1 5.1 Install an operating system .................................................. 5 -1 5.2 Support CD information ....................................................... 5- 1 5.2.1 Running the support CD ......................................... 5-1 5.2.2 M ...

  • Asus P4B266-E - page 6

    vi FCC/CDC st atements Federal Communications Commission Statement This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation. This equipment ...

  • Asus P4B266-E - page 7

    vii Safety information Electrical safety • T o prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect al ...

  • Asus P4B266-E - page 8

    viii About this guide This user guide contains the information you need when installing the ASUS P4B266-E motherboard. How this guide is organized This manual contains the following parts: • Chapter 1: Product introduction This chapter describes the features of the P4B266-E motherboard. It includes brief descriptions of the special attributes of ...

  • Asus P4B266-E - page 9

    ix Conventions used in this guide T o make sure that you perform certain tasks properly , take note of the following symbols used throughout this manual. Where to find more information Refer to the following sources for additional information and for product and software updates. 1 . ASUS W ebsites The ASUS websites worldwide provide updated inform ...

  • Asus P4B266-E - page 10

    x ASUS contact infor mation ASUST eK COMPUTER INC. (Asia-Pacific) Address: 150 Li-T e Road, Peitou, T aipei, T aiwan 1 12 General T el: +886-2-2894-3447 General Fax: +886-2-2894-3449 General Email: info@asus.com.tw T echnical Support MB/Others (T el): +886-2-2890-7121 (English) Notebook (T el): +886-2-2890-7122 (English) Desktop/Server (T el): +886 ...

  • Asus P4B266-E - page 11

    Chapter 1 This chapter describes the features of the P4B266-E motherboard. It includes brief explanations of the special attributes of the motherboard and the new technology it supports. Product introduction ...

  • Asus P4B266-E - page 12

    ASUS P4B266-E motherboard ...

  • Asus P4B266-E - page 13

    ASUS P4B266-E motherboard user guide 1-1 1 . 1 Welcome! Thank you for buying the ASUS ® P4B266-E motherboard! The ASUS P4B266-E motherboard delivers a host of new features and latest technology making it another standout in the long line of ASUS quality motherboards! The P4B266-E incorporates the Intel ® Pentium ® 4 Processor in 478-pin package/ ...

  • Asus P4B266-E - page 14

    1-2 Chapter 1: Product introduction 1 .3 Special features 1.3.1 Product highlights Latest processor technology The P4B266-E motherboard supports the latest Intel Pentium 4 478/ Northwood Processor , also known as P4, via a 478-pin surface mount ZIF socket. The Pentium 4 processor utilizes the advanced 0.18 micron processor core in FC-PGA2 package f ...

  • Asus P4B266-E - page 15

    ASUS P4B266-E motherboard user guide 1-3 USB 2.0 technology (optional) The motherboard implements the new Universal Serial Bus (USB) 2.0 specification, extending the connection speed from 12 Mbps on USB 1.1 to a fast 480 Mbps on USB 2.0. The higher bandwidth of USB 2.0 allows connection of devices such as high resolution video conferencing cameras, ...

  • Asus P4B266-E - page 16

    1-4 Chapter 1: Product introduction Digital audio interface (optional) On audio models, a digital audio connector is onboard to accommodate the Sony/Philips Digital Interface (S/PDIF) In/Out module, which supports coaxial interfaces. Experience 5.1-channel surround sound and enhanced 3D audio while playing DVDs and computer games. See page 2-34. On ...

  • Asus P4B266-E - page 17

    ASUS P4B266-E motherboard user guide 1-5 1.3.2 V alue-added solutions Overclocking The P4B266-E overclocking features: • adjustable CPU frequency multiple in BIOS using the ASUS JumperFree ™ solution • adjustable FSB/PCI frequency ratio • Stepless Frequency Selection (SFS) for fine-tuning system bus frequency from 100MHz up to 200MHz at 1MH ...

  • Asus P4B266-E - page 18

    1-6 Chapter 1: Product introduction 1 .4 Over view Before you install the P4B266-E motherboard, familiarize yourself with its physical configuration and available features to facilitate the motherboard installation and future upgrades. A sufficient knowledge of the motherboard specifications will also help you avoid mistakes that may damage the boa ...

  • Asus P4B266-E - page 19

    ASUS P4B266-E motherboard user guide 1-7 23 4 23 16 18 20 1 5 6 15 22 11 10 9 7 17 8 12 14 13 19 21 24 25 26 34 33 32 31 28 29 30 27 ...

  • Asus P4B266-E - page 20

    1-8 Chapter 1: Product introduction A TX 12V connector . This power connector connects the 4-pin 12V plug from the A TX 12V power supply . CPU socket. A 478-pin surface mount, Zero Insertion Force (ZIF) socket called mPGA478 B. This socket accommodates the Intel ® Pentium ® 4 478/Northwood Processor with 400MHz system bus. North bridge controller ...

  • Asus P4B266-E - page 21

    ASUS P4B266-E motherboard user guide 1-9 Super I/O controller . This Low Pin Count (LPC) interface provides the commonly used Super I/O functionality . The chipset supports a high-performance floppy disk controller for a 360K/720K/1.44M/ 2.88M floppy disk drive, a multi-mode parallel port, two standard compatible UAR T s, a Standard Infrared (SIR), ...

  • Asus P4B266-E - page 22

    1-10 Chapter 1: Product introduction PCI slots. These six 32-bit PCI 2.2 expansion slots support bus master PCI cards like SCSI or LAN cards with 133MB/s maximum throughput. AGP slot. This Accelerated Graphics Port (AGP) slot supports 1.5V AGP4X mode graphics cards for 3D graphical applications. LAN PHY . This Intel 82562ET LAN PHY works with the i ...

  • Asus P4B266-E - page 23

    Chapter 2 Hardware information This chapter describes the hardware setup procedures that you have to perform when installing system components. It includes details on the switches, jumpers, and connectors on the motherboard. ...

  • Asus P4B266-E - page 24

    ASUS P4B266-E motherboard ...

  • Asus P4B266-E - page 25

    ASUS P4B266-E motherboard user guide 2-1 2. 1 Motherboard ins tallation Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it. The P4B266-E uses the A TX form factor that measures 12 inches x 9.6 inches, a standard fit for most chassis. Do not overtighten the screws! Doing so may dam ...

  • Asus P4B266-E - page 26

    2-2 Chapter 2: Hardware information 2.2 Motherboard layout The audio, USB 2.0, RAID, and LAN features are optional. These components are grayed out in the above motherboard layout. For System Integrators: The SD and MS connectors may or may not be mounted depending on required specifications. 24.5cm (9.6in) 30.5cm (12.0in) PWRF AN PCI1 P ANEL FLOPP ...

  • Asus P4B266-E - page 27

    ASUS P4B266-E motherboard user guide 2-3 2.3 Before you proceed T ake note of the following precautions before you install motherboard components or change any motherboard settings. 1. Unplug the power cord from the wall socket before touching any component. 2. Use a grounded wrist strap or touch a safely grounded object or to a metal object, such ...

  • Asus P4B266-E - page 28

    2-4 Chapter 2: Hardware information 2.4 Central Pr ocessing Unit (CPU) 2.4.1 Overview The motherboard comes with a surface mount 478-pin Zero Insertion Force (ZIF) socket. This socket is specifically designed for the Intel ® Pentium ® 4 478/Northwood Processor . The Intel Pentium 4 Processor in the 478-pin package uses the Flip-Chip Pin Grid Arra ...

  • Asus P4B266-E - page 29

    ASUS P4B266-E motherboard user guide 2-5 2.4.2 Installing the CPU Follow these steps to install a CPU. 1. Locate the 478-pin ZIF socket on the motherboard. 2. Unlock the socket by pressing the lever sideways, then lift it up to a 90 ° -100 ° angle. Socket Lever Make sure that the socket lever is lifted up to 90 ° -100 ° angle, otherwise the CPU ...

  • Asus P4B266-E - page 30

    2-6 Chapter 2: Hardware information 3. Position the CPU above the socket such that its marked corner matches the base of the socket lever . 4. Carefully insert the CPU into the socket until it fits in place. The CPU fits only in one correct orientation. DO NOT force the CPU into the socket to prevent bending the pins and damaging the CPU! 5. When t ...

  • Asus P4B266-E - page 31

    ASUS P4B266-E motherboard user guide 2-7 2.4.3 Installing the heatsink and fan The Intel ® Pentium ® 4 478/Northwood Processor requires a specially designed heatsink and fan assembly to ensure optimum thermal condition and performance. The retention module base is already installed on the motherboard upon purchase. Y ou do not have to remove the ...

  • Asus P4B266-E - page 32

    2-8 Chapter 2: Hardware information 2. Position the fan with the retention mechanism on top of the heatsink. Align and snap the four hooks of the retention mechanism to the holes on each corner of the module base. Keep the retention locks lifted upward while fitting the retention mechanism to the module base. Make sure that the fan and retention me ...

  • Asus P4B266-E - page 33

    ASUS P4B266-E motherboard user guide 2-9 2.4.4 Connecting the CPU fan cable When the fan, heatsink, and the retention mechanism are in place, connect the CPU fan cable to the connector on the motherboard labeled CPU_F AN. 3. Push down the locks on the retention mechanism to secure the heatsink and fan to the module base. When secure, the retention ...

  • Asus P4B266-E - page 34

    2-10 Chapter 2: Hardware information 2.5 System memor y 2.5.1 Overview The motherboard comes with three Double Data Rate (DDR) Dual Inline Memory Module (DIMM) sockets. These sockets support up to 2GB system memory using 184-pin unbuffered ECC or non-ECC PC2100/1600 DIMMs. A DDR DIMM is keyed with a notch so that it fits in only one direction. DO N ...

  • Asus P4B266-E - page 35

    ASUS P4B266-E motherboard user guide 2-11 2.5.2 Memory configurations 2.5.3 Installing a DIMM Make sure to unplug the power supply before adding or removing DIMMs or other system components. Failure to do so may cause severe damage to both the motherboard and the components. Follow these steps to install a DIMM. 1. Unlock a DIMM socket by pressing ...

  • Asus P4B266-E - page 36

    2-12 Chapter 2: Hardware information 2.5.4 Removing a DIMM Follow these steps to remove a DIMM. 1. Simultaneously press the retaining clips outward to unlock the DIMM. Support the DIMM lightly with your fingers when pressing the retaining clips. The DIMM might get damaged when it flips out with extra force. 2. Remove the DIMM from the socket. 3. Fi ...

  • Asus P4B266-E - page 37

    ASUS P4B266-E motherboard user guide 2-13 2.6 Expansion slots In the future, you may need to install expansion cards. The motherboard has six PCI slots, one Accelerated Graphics Port (AGP) slot, and a Communications and Networking Riser (CNR) slot. The following sub- sections describe the slots and the expansion cards that they support. 2.6.1 Insta ...

  • Asus P4B266-E - page 38

    2-14 Chapter 2: Hardware information Standard Interrupt Assignments IRQ Priority Standard Function 0 1 System T imer 1 2 Keyboard Controller 2 N/A Programmable Interrupt 3* 1 1 Communications Port (COM2) 4* 12 Communications Port (COM1) 5* 13 Sound Card (sometimes LPT2) 6 14 Floppy Disk Controller 7* 15 Printer Port (LPT1) 8 3 System CMOS/Real T im ...

  • Asus P4B266-E - page 39

    ASUS P4B266-E motherboard user guide 2-15 2.6.3 PCI slots There are six 32-bit PCI slots in this motherboard. The slots support PCI cards such as a LAN card, SCSI card, USB card, and other cards that comply with PCI specifications. The following figure shows a LAN card installed on a PCI slot. 2.6.4 AGP slot This motherboard has an Accelerated Grap ...

  • Asus P4B266-E - page 40

    2-16 Chapter 2: Hardware information 2.6.5 CNR slot The Communications and Networking Riser (CNR) slot supports interface cards that integrates audio, modem, and network functionality . The CNR specification supports interfaces including: • Audio Codec ‘ 97 (AC ’ 97) - for audio and/or modem functions • Local Area Network (LAN) - for networ ...

  • Asus P4B266-E - page 41

    ASUS P4B266-E motherboard user guide 2-17 2.7 Switches and jumper s The motherboard frequency is adjusted through the DIP switches. The white block represents the switch position. The illustration below shows all the switches in the OFF position. The JEN jumper is set in conjunction with the DIP switches. In JumperFree mode, set all the DIP switche ...

  • Asus P4B266-E - page 42

    2-18 Chapter 2: Hardware information 2. CPU Core:Bus frequency multiple (DSWMUL 1-4) This option sets the frequency multiple between the CPU internal and external frequencies. This must be set in conjunction with the CPU Bus Frequency . Make sure that the JEN jumper is set to jumper mode before setting the above switches. The option to set the CPU ...

  • Asus P4B266-E - page 43

    ASUS P4B266-E motherboard user guide 2-19 3. CPU frequency selection (DSWF 1-5) This option tells the clock generator what frequency to send the CPU. This allows the selection of the CPU ’ s external frequency (or Bus Clock). The BUS Clock multiplied by the Frequency Multiple equals the CPU ’ s internal frequency (the advertised CPU speed). Set ...

  • Asus P4B266-E - page 44

    2-20 Chapter 2: Hardware information 5. Keyboard power (3-pin KBPWR) This jumper allows you to enable or disable the keyboard wake-up feature. Set this jumper to pins 2-3 (+5VSB) if you wish to wake up the computer when you press a key on the keyboard (the default is the Space Bar). This feature requires an A TX power supply that can supply at leas ...

  • Asus P4B266-E - page 45

    ASUS P4B266-E motherboard user guide 2-21 7. USB device wake-up (3-pin USBPWR01, USBPWR23) Set these jumpers to +5V to wake up the computer from S1 sleep mode (CPU stopped, DRAM refreshed, system running in low power mode) using the connected USB devices. Set to +5VSB to wake up from S3 sleep mode (no power to CPU, DRAM in slow refresh, power suppl ...

  • Asus P4B266-E - page 46

    2-22 Chapter 2: Hardware information 9. VCORE over-voltage (3-pin OVER_VOL T) When set to Normal, this jumper allows CPU Vcore ranges of 1.75V to 1.85V for Pentium 4 Willamette and 1.5V to 1.7V for Northwood. When set to Over V oltage, Willamette will have a Vcore setting range of +1.75V to +2.1V , and Northwood 1.50V to 1.75V . Y ou may adjust the ...

  • Asus P4B266-E - page 47

    ASUS P4B266-E motherboard user guide 2-23 1 1. Bass/Center setting (3-pin BCS1, BCS2) (on audio models only) These jumpers allow you to select the speaker output for a 6-channel audio system. No audio standard exists for the three pick-up surfaces on male audio ports, so it is necessary to switch the jumpers from the default position CENTER/BASS (p ...

  • Asus P4B266-E - page 48

    2-24 Chapter 2: Hardware information 13. Clear RTC RAM (C219) These solder points allow you to clear the Real T ime Clock (R TC) RAM in CMOS. Y ou can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The RAM data in CMOS, that include system setup information such as system passwords, is powered by ...

  • Asus P4B266-E - page 49

    ASUS P4B266-E motherboard user guide 2-25 2.8 Connectors This section describes and illustrates the internal connectors on the motherboard. Some pins are used for connectors or power sources. These are clearly distinguished from jumpers in the Motherboard Layout. Placing jumper caps over these connector pins will cause damage to your motherboard. A ...

  • Asus P4B266-E - page 50

    2-26 Chapter 2: Hardware information 2. IDE connectors (40-1 pin PRIMAR Y IDE/SECONDAR Y IDE) This connector supports the provided UltraDMA/100/66 IDE hard disk ribbon cable. Connect the cable ’ s blue connector to the primary (recommended) or secondary IDE connector , then connect the gray connector to the UltraDMA/100/66 slave device (hard disk ...

  • Asus P4B266-E - page 51

    ASUS P4B266-E motherboard user guide 2-27 3. RAID A T A/133/100/66/33 connectors (40-1 pin A T AIDE1, A T AIDE2) (on RAID models only) These connectors support either RAID 0 or RAID 1 configuration through the onboard RAID controller chip. Y ou can use the RAID feature to set up a disk array configuration and to support additional IDE devices. Y ou ...

  • Asus P4B266-E - page 52

    2-28 Chapter 2: Hardware information 3. Floppy disk drive connector (34-1 pin FLOPPY) This connector supports the provided floppy drive ribbon cable. After connecting one end to the motherboard, connect the other end to the floppy drive. (Pin 5 is removed to prevent incorrect insertion when using ribbon cables with pin 5 plug). 4. Chassis open alar ...

  • Asus P4B266-E - page 53

    ASUS P4B266-E motherboard user guide 2-29 5. CPU, Chassis, and Power Fan Connectors (3-pin CPU_F AN, PWRF AN, CH_F AN) The three fan connectors support cooling fans of 350mA (4.2 W atts) or a total of 1A (12W) at +12V . Orient the fans so that the heat sink fins allow air flow to go across the onboard heat sinks instead of the expansion slots. The ...

  • Asus P4B266-E - page 54

    2-30 Chapter 2: Hardware information 6. ASUS EZ Plug™ and A TX power connectors (20-pin A TXPWR, 4-pin A TX+12V , 4-pin AUX+12V) These connectors connect to an A TX 12V power supply . The plugs from the power supply are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors ...

  • Asus P4B266-E - page 55

    ASUS P4B266-E motherboard user guide 2-31 7. USB headers (10-1 pin USB1 1_23, USB20_12) If the USB port connectors on the rear panel are inadequate, two USB headers are available for additional USB port connectors. The header labeled USB1 1_23 complies with the Universal Serial Bus (USB) 1.1 specification. Connect the bundled 2-port USB connector s ...

  • Asus P4B266-E - page 56

    2-32 Chapter 2: Hardware information 8. SMBus connector (6-1 pin SMB) This connector allows you to connect SMBus (System Management Bus) devices. Devices communicate with an SMBus host and/or other SMBus devices using the SMBus interface. SMBus is a specific implementation of an I 2 C bus, a multi-device bus that allows multiple chips to connect to ...

  • Asus P4B266-E - page 57

    ASUS P4B266-E motherboard user guide 2-33 10. Line in connector (5-pin LINE_IN) (optional) This connector is for a front panel Line In jack with a return path for automatic signal switching. 1 1. Front panel audio connector (10-1 pin AAP ANEL) (optional) This is an interface for the Intel front panel audio cable that allow convenient connection and ...

  • Asus P4B266-E - page 58

    2-34 Chapter 2: Hardware information 12. ASUS iPanel connector (24-1 pin AFP ANEL) (optional) This connector allows you to connect an optional ASUS iPanel, an easy-to-access drive bay with front I/O ports and status LEDs. If you are not using an ASUS iPanel, you can connect an optional wireless transmitting and receiving infrared module to the SIR ...

  • Asus P4B266-E - page 59

    ASUS P4B266-E motherboard user guide 2-35 15. SD and MS connectors (10-pin SD, MS)* These connectors support the sophisticated memory devices called Secure Digital (SD) memory card and Memory Stick (MS). These devices facilitate fast and secure downloading of all types of digital files such as photos, music, news, and movies. Y ou may also use SD a ...

  • Asus P4B266-E - page 60

    2-36 Chapter 2: Hardware information 17. Power supply thermal connector (2-pin TRPWR) If your power supply has a thermal monitoring feature, connect its thermal sensor cable to this connector . 16. GAME/MIDI connector (16-1 pin GAME) This connector supports a GAME/MIDI module. If your package came with the optional GAME/USB 2.0 module, connect the ...

  • Asus P4B266-E - page 61

    ASUS P4B266-E motherboard user guide 2-37 19. System panel connector (20-pin P ANEL) This connector accommodates several system front panel functions. P4B266-E ® P4B266-E System Panel Connectors * Requires an A TX power supply . PLED Ground MLED PWR +5 V Keylock +5V Speaker Speaker Connector Power LED Ground +5 V Reset SW SMI Lead Message LED ExtS ...

  • Asus P4B266-E - page 62

    2-38 Chapter 2: Hardware information • System Power LED Lead (3-1 pin PLED) This 3-1 pin connector connects to the system power LED. The LED lights up when you turn on the system power , and blinks when the system is in sleep mode. • Keyboard Lock Lead (2-pin KEYLOCK) This 2-pin connector connects to a chassis-mounted switch to allow the use of ...

  • Asus P4B266-E - page 63

    Chapter 3 Powering up This chapter describes the power up sequence and gives information on the BIOS beep codes. ...

  • Asus P4B266-E - page 64

    ASUS P4B266-E motherboard ...

  • Asus P4B266-E - page 65

    ASUS P4B266-E motherboard user guide 3-1 3. 1 St ar ting up for t he firs t time 1. After making all the connections, replace the system case cover . 2. Be sure that all switches are off. 3. Connect the power cord to the power connector at the back of the system chassis. 4. Connect the power cord to a power outlet that is equipped with a surge prot ...

  • Asus P4B266-E - page 66

    3-2 Chapter 3: Powering up 3.2 V ocal POST Messages This motherboard includes the Winbond speech controller to support a special feature called the ASUS POST Reporter ™ . This feature gives you vocal POST messages and alerts to inform you of system events and boot status. In case of a boot failure, you will hear the specific cause of the problem. ...

  • Asus P4B266-E - page 67

    ASUS P4B266-E motherboard user guide 3-3 No keyboard detected • Check your keyboard if properly connected to the purple PS/2 connector on the rear panel. • See section “ 1.4.1 Motherboard components ” for the location of the connector . No floppy disk detected • Make sure you have connected a floppy disk to the floppy disk connector on th ...

  • Asus P4B266-E - page 68

    3-4 Chapter 3: Powering up 3.3 Powering of f the com puter Y ou must first exit the operating system and shut down the system before switching off the power . For A TX power supplies, you can press the A TX power switch after exiting or shutting down the operating system. If you use Windows 95/98/2000/XP , click the Start button, click Shut Down, t ...

  • Asus P4B266-E - page 69

    Chapter 4 BIOS setup This chapter tells how to change system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided. ...

  • Asus P4B266-E - page 70

    ASUS P4B266-E motherboard ...

  • Asus P4B266-E - page 71

    ASUS P4B266-E motherboard user guide 4-1 4. 1 Managing and updating your BIOS 4.1.1 Using the computer system for the first time It is recommended that you save a copy of the original motherboard BIOS along with a Flash Memory Writer utility (AFLASH.EXE) to a bootable floppy disk in case you need to reinstall the BIOS later . AFLASH.EXE is a Flash ...

  • Asus P4B266-E - page 72

    4-2 Chapter 4: BIOS Setup 5. Select 1. Save Current BIOS to File from the Main menu and press <Enter>. The Save Current BIOS T o File screen appears. 6. T ype a filename and the path, for example, A:XXX-XX.XXX, then press <Enter>. ...

  • Asus P4B266-E - page 73

    ASUS P4B266-E motherboard user guide 4-3 1. Download an updated ASUS BIOS file from the Internet (WWW or FTP) (see ASUS CONT ACT INFORMA TION on page x for details) and save to the boot floppy disk you created earlier . 2. Boot from the floppy disk. 3. At the “ A: ” prompt, type AFLASH and then press <Enter>. 4. At the Main Menu, type 2 ...

  • Asus P4B266-E - page 74

    4-4 Chapter 4: BIOS Setup 7. The utility starts to program the new BIOS information into the Flash ROM. The boot block is updated automatically only when necessary . This minimizes the possibility of boot problems in case of update failures. When the programming is done, the message “Flashed Successfully” appears. 8. Follow the onscreen instruc ...

  • Asus P4B266-E - page 75

    ASUS P4B266-E motherboard user guide 4-5 4.2 BIOS Setup progr am This motherboard supports a programmable EEPROM that you can update using the provided utility described in section “ 4.1 Managing and updating your BIOS. ” Use the BIOS Setup program when you are installing a motherboard, reconfiguring your system, or prompted to “ Run Setup ? ...

  • Asus P4B266-E - page 76

    4-6 Chapter 4: BIOS Setup 4.2.1 BIOS menu bar The top of the screen has a menu bar with the following selections: MAIN Use this menu to make changes to the basic system configuration. ADV ANCED Use this menu to enable and make changes to the advanced features. POWER Use this menu to configure and enable Power Management features. BOOT Use this menu ...

  • Asus P4B266-E - page 77

    ASUS P4B266-E motherboard user guide 4-7 General help In addition to the Item Specific Help window , the BIOS setup program also provides a General Help screen. Y ou may launch this screen from any menu by simply pressing <F1> or the <Alt> + <H> combination. The General Help screen lists the legend keys and their corresponding fun ...

  • Asus P4B266-E - page 78

    4-8 Chapter 4: BIOS Setup System Time [XX:XX:XX] Sets the system to the time that you specify (usually the current time). The format is hour , minute, second. V alid values for hour , minute and second are Hour: (00 to 23), Minute: (00 to 59), Second: (00 to 59). Use the <T ab> or <Shift> + <T ab> keys to move between the hour , m ...

  • Asus P4B266-E - page 79

    ASUS P4B266-E motherboard user guide 4-9 4.3.1 Primary and Secondary Master/Slave T ype [Auto] Select [Auto] to automatically detect an IDE hard disk drive. If automatic detection is successful, Setup automatically fills in the correct values for the remaining fields on this sub-menu. If automatic detection fails, this may be because the hard disk ...

  • Asus P4B266-E - page 80

    4-10 Chapter 4: BIOS Setup If no drive is installed or if you are removing a drive and not replacing it, select [None]. Other options for the T ype field are: [CD-ROM] - for IDE CD-ROM drives [LS-120] - for LS-120 compatible floppy disk drives [ZIP] - for ZIP-compatible disk drives [MO] - for IDE magneto optical disk drives [Other A T API Device] - ...

  • Asus P4B266-E - page 81

    ASUS P4B266-E motherboard user guide 4-11 T ranslation Method [LBA] Select the hard disk drive type in this field. When Logical Block Addressing (LBA) is enabled, the 28-bit addressing of the hard drive is used without regard for cylinders, heads, or sectors. Note that LBA Mode is necessary for drives with more than 504MB storage capacity . Configu ...

  • Asus P4B266-E - page 82

    4-12 Chapter 4: BIOS Setup SMART Monitoring [Disabled] This field allows you to enable or disable the S.M.A.R.T . (Self-Monitoring, Analysis and Reporting T echnology) system that utilizes internal hard disk drive monitoring technology . This parameter is normally disabled because the resources used in the SMART monitoring feature may decrease syst ...

  • Asus P4B266-E - page 83

    ASUS P4B266-E motherboard user guide 4-13 4.3.2 Keyboard Features Boot Up NumLock Status [On] This field enables users to activate the Number Lock function upon system boot. Configuration options: [Of f] [On] Keyboard Auto-Repeat Rate [6/Sec] This controls the speed at which the system registers repeated keystrokes. Options range from 6 to 30 chara ...

  • Asus P4B266-E - page 84

    4-14 Chapter 4: BIOS Setup Language [English] This field displays the BIOS language version. Supervisor Password [Disabled] / User Password [Disabled] These fields allow you to set passwords. T o set a password, highlight the appropriate field and press <Enter>. T ype in a password then press <Enter>. Y ou can type up to eight alphanume ...

  • Asus P4B266-E - page 85

    ASUS P4B266-E motherboard user guide 4-15 4.4 Advanced Menu CPU Speed [Manual] When the motherboard is set to JumperFree ™ mode, this field allows you to select the internal frequency of the CPU. Select [Manual] if you want to make changes to the two subsequent fields. Note that selecting a frequency higher than the CPU manufacturer recommends ma ...

  • Asus P4B266-E - page 86

    4-16 Chapter 4: BIOS Setup CPU VCore Setting [Auto] The [Manual] setting allows you to manually select the core voltage supplied to the CPU (see next item). However , it is recommended that you keep the default setting [Auto] to allow the system to automatically determine the appropriate CPU core voltage. CPU VCore [1.750V] (for Willamette) , [1.50 ...

  • Asus P4B266-E - page 87

    ASUS P4B266-E motherboard user guide 4-17 PS/2 Mouse Function Control [Auto] The default setting [Auto] allows the system to detect a PS/2 mouse at startup. If a mouse is detected, the BIOS assigns IRQ12 to the PS/2 mouse. Otherwise, IRQ12 can be used for expansion cards. When you set this field to [Enabled], BIOS reserves IRQ12, whether or not a P ...

  • Asus P4B266-E - page 88

    4-18 Chapter 4: BIOS Setup 4.4.1 Chip Configuration The DDR SDRAM CAS Latency parameter appears only when you set the SDRAM Configuration to [User Defined]. SDRAM RAS to CAS Delay [3T] This item controls the latency between the DDR SDRAM active command and the read/write command. The DDR SDRAM RAS to CAS Delay parameter appears only when you set th ...

  • Asus P4B266-E - page 89

    ASUS P4B266-E motherboard user guide 4-19 SDRAM Idle Timer [Infinite] Configuration options: [Infinite] [0T] [8T] [16T] [64T] Graphics Aperture Size [64MB] This feature allows you to select the size of mapped memory for AGP graphic data. Configuration options: [4MB] [8MB] [16MB] [32MB] [64MB] [128MB] [256MB] AGP Capability [4X Mode] This motherboar ...

  • Asus P4B266-E - page 90

    4-20 Chapter 4: BIOS Setup Delayed T ransaction [Disabled] When set to [Enabled], this feature frees the PCI bus when the CPU is accessing 8-bit ISA cards. This process normally consumes about 50-60 PCI clocks without PCI delayed transaction. Set this field to [Disabled] when using ISA cards that are not PCI 2.1 compliant. Configuration options: [E ...

  • Asus P4B266-E - page 91

    ASUS P4B266-E motherboard user guide 4-21 4.4.2 I/O Device Configuration Floppy Disk Access Control [R/W] When set to [Read Only], this parameter protects files from being copied to floppy disks by allowing reads from, but not writes to, the floppy disk drive. The default setting [R/W] allows both reads and writes. Configuration options: [R/W] [Rea ...

  • Asus P4B266-E - page 92

    4-22 Chapter 4: BIOS Setup Parallel Port Mode [ECP+EPP] This field allows you to set the operation mode of the parallel port. [Normal] allows normal-speed operation but in one direction only; [EPP] allows bidirectional parallel port operation; [ECP] allows the parallel port to operate in bidirectional DMA mode; [ECP+EPP] allows normal speed operati ...

  • Asus P4B266-E - page 93

    ASUS P4B266-E motherboard user guide 4-23 Slot 1/5, Slot 2, Slot 3, Slot 4, Slot 6 IRQ [Auto] These fields automatically assign the IRQ for each PCI slot. The default setting for each field is [Auto], which utilizes auto-routing to determine IRQ assignments. Configuration options: [Auto] [NA] [3] [4] [5] [7] [9] [10] [1 1] [12] [14] [15] PCI/VGA Pa ...

  • Asus P4B266-E - page 94

    4-24 Chapter 4: BIOS Setup IRQ XX Reserved [No/ICU] These fields indicate whether or not the displayed IRQ for each field is being used by a legacy (non-PnP) ISA card. The setting [No/ICU] for an IRQ field indicates that you are using the ISA Configuration Utility (ICU), and that this particular IRQ is NOT required by a legacy ISA card. Set the IRQ ...

  • Asus P4B266-E - page 95

    ASUS P4B266-E motherboard user guide 4-25 4.5 Power Menu The Power menu allows you to reduce power consumption. This feature turns of f the video display and shuts down the hard disk after a period of inactivity . Power Management [User Defined] This field allows you to activate or deactivate the automatic power saving features. When set to [Disabl ...

  • Asus P4B266-E - page 96

    4-26 Chapter 4: BIOS Setup V ideo Off Option [Suspend -> Off ] This field determines when to activate the video off feature for monitor power management. Configuration options: [Always On] [Suspend -> Off] V ideo Off Method [DPMS OFF] This field defines the video of f features. The Display Power Management System (DPMS) feature allows the BIO ...

  • Asus P4B266-E - page 97

    ASUS P4B266-E motherboard user guide 4-27 4.5.1 Power Up Control AC PWR Loss Restart [Disabled] This allows you to set whether or not to reboot the system after power interruptions. [Disabled] leaves your system off while [Enabled] reboots the system. [Previous State] sets the system back to the state it was before the power interruption. Configura ...

  • Asus P4B266-E - page 98

    4-28 Chapter 4: BIOS Setup Power On By PS/2 Keyboard [Space Bar] This parameter allows you to use specific keys on the keyboard to turn on the system. This feature requires an A TX power supply that provides at least 1A on the +5VSB lead. Configuration options: [Disabled] [Space Bar] [Ctrl-Esc] [Power Key] Power On By PS/2 Mouse [Disabled] When set ...

  • Asus P4B266-E - page 99

    ASUS P4B266-E motherboard user guide 4-29 4.5.2 Hardware Monitor MB T emperature [xxxC/xxxF] CPU T emperature [xxxC/xxxF] The onboard hardware monitor automatically detects the motherboard and CPU temperatures and shows the values opposite these items. CPU Fan Speed [xxxxRPM] System Fan Speed [xxxxRPM) PCI Fan Speed [xxxxRPM] The onboard hardware m ...

  • Asus P4B266-E - page 100

    4-30 Chapter 4: BIOS Setup Boot Sequence The Boot menu allows you to select among the four possible types of boot devices listed using the up and down arrow keys. By using the <+> or <Space> key , you can promote devices and by using the <-> key , you can demote devices. Promotion or demotion of devices alters the priority which t ...

  • Asus P4B266-E - page 101

    ASUS P4B266-E motherboard user guide 4-31 Other Boot Device Select [INT18 Device (Network)] Configuration options: [Disabled] [SCSI Boot Device] [INT18 Device (Network)] Plug & Play O/S [No] This field allows you to use a Plug-and-Play (PnP) operating system to configure the PCI bus slots instead of using the BIOS. When [Y es] is selected, inte ...

  • Asus P4B266-E - page 102

    4-32 Chapter 4: BIOS Setup Interrupt Mode [PIC] The Advanced Programmable Interrupt Controller (APIC) setting allows you to distribute interrupt routings other than the 16 IRQs. The Programmable Interrupt Controller (PIC) setting allows you to use the 16 IRQs only . Configuration options: [PIC] [APIC] ...

  • Asus P4B266-E - page 103

    ASUS P4B266-E motherboard user guide 4-33 4.7 Exit Menu When you have made all of your selections from the various menus in the Setup program, save your changes and exit Setup. Select Exit from the menu bar to display the following menu. Exit Saving Changes Once you are finished making your selections, choose this option from the Exit menu to ensur ...

  • Asus P4B266-E - page 104

    4-34 Chapter 4: BIOS Setup Load Setup Defaults This option allows you to load the default values for each of the parameters on the Setup menus. When you select this option or if you press <F5>, a confirmation window appears. Select [Y es] to load default values. Select Exit Saving Changes or make other changes before saving the values to the ...

  • Asus P4B266-E - page 105

    Chapter 5 Software support This chapter describes the contents of the support CD that comes with the motherboard package. ...

  • Asus P4B266-E - page 106

    ASUS P4B266-E motherboard ...

  • Asus P4B266-E - page 107

    ASUS P4B266-E motherboard user guide 5-1 5. 1 Inst all an operating system This motherboard supports Windows 98/ME/NT/2000/XP and OS/2 operating system (OS). Always install the latest OS version and corresponding updates so you can maximize the features of your hardware. Because motherboard settings and hardware options vary , use the setup procedu ...

  • Asus P4B266-E - page 108

    5-2 Chapter 5: Software support 5.2.2 Main menu From the welcome screen, the program takes you directly to the main menu. The main menu displays an image of the motherboard, and the buttons and icons that link you to the software, drivers, utilities, and other information contained in the support CD. If the welcome screen did not appear automatical ...

  • Asus P4B266-E - page 109

    ASUS P4B266-E motherboard user guide 5-3 5.2.3 Software menu The software menu shows the applications and other software that the motherboard supports. The highlighted items indicate that they are available for your motherboard. Simply click on a specific item then follow the installation wizard to install it. The software menu is composed of two s ...

  • Asus P4B266-E - page 110

    5-4 Chapter 5: Software support 5.2.4 Drivers menu The drivers menu shows the available device drivers if the system detects installed devices. Install the necessary drivers to activate the devices. The drivers menu is composed of two screens. Click on the Next button on the lower right corner of the first screen to display the second menu screen. ...

  • Asus P4B266-E - page 111

    ASUS P4B266-E motherboard user guide 5-5 INF Driver This item installs the Intel ® Chipset Software Installation Utility that enables Plug-n-Play INF support for Intel chipset components. This utility installs to the target system the Windows INF files that outline to the operating system how the chipset components will be configured. Y ou may ins ...

  • Asus P4B266-E - page 112

    5-6 Chapter 5: Software support 5.2.6 ASUS Contact Information Clicking the ASUS Contact Information button displays as stated. Y ou may also find this information on page x of this user guide. 5.2.5 DOS Utilities menu The DOS utilities menu includes items that you can run in DOS mode. These items are also present in the software menu. Winbond Memo ...

  • Asus P4B266-E - page 113

    ASUS P4B266-E motherboard user guide 5-7 5.2.7 Other information The icons on the left side of the screen give additional information on the motherboard and the contents of the support CD. This section shows the pop-up windows that appear when you click the icons. Motherboard Info The window displays the general specifications of the P4B266-E mothe ...

  • Asus P4B266-E - page 114

    5-8 Chapter 5: Software support T echnical Support Form The window displays the ASUS T echnical Support Request Form that you have to fill up when requesting technical support. Readme The window displays the contents of the support CD and a brief description of each in text format. ...

  • Asus P4B266-E - page 115

    ASUS P4B266-E motherboard user guide 5-9 5.3 Softwar e information Most of the applications in the support CD have wizards that will conveniently guide you through the installation. View the online help or readme file that came with the software for more information. This section provides details on the new software applications that the motherboar ...

  • Asus P4B266-E - page 116

    5-10 Chapter 5: Software support 4. From the FTP site, select the BIOS version that you wish to download. Click Next. 5. Follow the instructions on the succeeding screens to complete the update process. If you selected the option to update the BIOS from a file, a window pops up prompting you to locate the file. Select the file, click Save, then fol ...

  • Asus P4B266-E - page 117

    ASUS P4B266-E motherboard user guide 5-11 4. From the selection that appears, choose a logo image. Click Next. NOTE: If you wish, you may create your own boot logo image in GIF , JPG, or BMP file formats. 6. The next screen prompts you to flash the original BIOS to update it with the new boot logo. Click Flash to update the BIOS. 7. When finished, ...

  • Asus P4B266-E - page 118

    5-12 Chapter 5: Software support 5.3.3 Winbond V oice Editor The Winbond V oice Editor software allows you to customize the vocal POST messages. Install the software from the software menu in the support CD. See section “ 5.2.3 Software menu ” . Follow these steps to use the Winbond V oice Editor . Launching the program Launch the program eithe ...

  • Asus P4B266-E - page 119

    ASUS P4B266-E motherboard user guide 5-13 Changing the default language 1. Click on the Load button. a window showing the available languages appears. 2. Select your desired language then click Open. The event messages for the language you selected appear on the V oice Editor screen. For some languages, not all events have a corresponding message d ...

  • Asus P4B266-E - page 120

    5-14 Chapter 5: Software support Y ou may want to create a separate folder for your wave files so you can locate them easily in one place. Customizing your POST messages If your language is not in the selection or if you wish to record your own POST messages to replace the pre-installed wave files, you may easily do so. Follow these steps to custom ...

  • Asus P4B266-E - page 121

    ASUS P4B266-E motherboard user guide 5-15 If you receive an error message telling you that the files exceed the total allowable size, do one or all of the following. • T ry to modify your messages to make them shorter • Save the wave files at a lower quality • Skip lesser used events like FDD Detection, IDE HDD Detection, etc. 7. Click a POST ...

  • Asus P4B266-E - page 122

    5-16 Chapter 5: Software support 5.3.4 Multi-channel audio feature The C-Media PCI Audio Driver and Applications are included in the Support CD that came with your motherboard package. Install these programs to enable the multi-channel audio feature. Y ou may also launch the Mixer by clicking on the Start button on your Windows desktop, then select ...

  • Asus P4B266-E - page 123

    ASUS P4B266-E motherboard user guide 5-17 Running the C-Media Audio Demo Program The C-Media audio demo program allows you to test and fine tune your speaker system. T o launch the the multi-channel audio demo program, click on Start from your desktop, then select PCI Audio Applications/ Multi-Channel Audio Demo . From the demo program interface, c ...

  • Asus P4B266-E - page 124

    5-18 Chapter 5: Software support 5.4 RAID 0/RAID 1 configurations The onboard Promise ® PDC20276 RAID controller chipset allows you to create a Redundant Array of Independent Disks (RAID) configuration. Use the MBFastT rak ™ Lite BIOS included into the system BIOS and the FastBuild ™ Utility to configure a disk array . 5.4.1 Install the hard d ...

  • Asus P4B266-E - page 125

    ASUS P4B266-E motherboard user guide 5-19 5.4.2 Enter the MBFastBuild ™ utility 1. Boot the system. If this is the first time you boot the system with the new hard disks installed and connected to the A T AIDE connectors on the motherboard, the MBFastT rak133 Lite ™ BIOS displays the following: 2. Press <Ctrl-F> simultaneously to display ...

  • Asus P4B266-E - page 126

    5-20 Chapter 5: Software support 5.4.3 Creating a RAID 0 array (Performance) 1. In the FastBuild ™ utility main menu, press “ 1 ” to select Auto Setup. The following screen appears. 2. Use the arrow keys to go to the field Optimize Array for and select “ Performance ” with the space bar . The Mode field displays “ Stripe ” . 3. Go to ...

  • Asus P4B266-E - page 127

    ASUS P4B266-E motherboard user guide 5-21 5.4.4 Creating a RAID 1 array (Security) Creating a Security Array with New Drives 1. In the FastBuild ™ utility main menu, press “ 1 ” to select Auto Setup. 2. Use the arrow keys to go to the field Optimize Array for and select “ Security ” with the space bar . The Mode field displays “ Mirror ...

  • Asus P4B266-E - page 128

    5-22 Chapter 5: Software support Creating a Security Array with Existing Data Drive If you would like to use an existing drive that already contains data and/or is the bootable drive in your system, make sure that the new hard drive you will use in the array has the same or larger capacity as the existing drive. Backup all important data before cre ...

  • Asus P4B266-E - page 129

    Glossary This part lists the technical terms that you may encounter when reading this document. ...

  • Asus P4B266-E - page 130

    ASUS P4B266-E motherboard ...

  • Asus P4B266-E - page 131

    ASUS P4B266-E motherboard user guide G-1 AC’97 (Audio Codec '97). AC '97 is the next step in enabling PCs with audio quality comparable to consumer electronics devices. The specification defines new cost-effective options to help integrate the components necessary to support next-generation auto-intensive PC applications such as DVD, 3- ...

  • Asus P4B266-E - page 132

    G-2 Glossary BIOS (Basic Input/Output System). BIOS is a set of routines that control how the computer transfers data between computer components, such as memory , disks, and the display adapter . The BIOS instructions are built into the computer ’s read-only memory . BIOS parameters are configurable through the BIOS Setup program. Y ou can updat ...

  • Asus P4B266-E - page 133

    ASUS P4B266-E motherboard user guide G-3 Device Driver . A software routine that links a peripheral device to the operating system. It acts as a translator between the device and the applications that use it. Each device has its own set of specialized commands known only to its driver while the applications access devices using high-level generic c ...

  • Asus P4B266-E - page 134

    G-4 Glossary IrDA (Infrared Data Association). An internaltional organization that creates and promotes inter-operable, low cost, infrared data interconnection standards that support a walk-up, point-to-point model. The IrDA protocol is designed to support transmission of data between two devices over short-range point-to-point infrared at speeds b ...

  • Asus P4B266-E - page 135

    ASUS P4B266-E motherboard user guide G-5 POST (Power On Self T est). When you turn ON the computer , it will first run through the POST , a series of software-controlled diagnostic tests. The POST checks system memory , the motherboard circuitry , the display , the keyboard, the diskette drive, and other I/O devices. PS/2 Port. PS/2 ports are based ...

  • Asus P4B266-E - page 136

    G-6 Glossary System Disk. A system disk contains the core file of an operating system and is used to boot up the operating system. TCP/IP (T ransmission Control Protocol/Internet Protocol). The communications protocol used by the UNIX system and the Internet. TCP checks for lost packets, puts the data from multiple packets into the correct order , ...

  • Asus P4B266-E - page 137

    Index This part contains an alphabetical list of the topics found in this document. ...

  • Asus P4B266-E - page 138

    ASUS P4B266-E motherboard ...

  • Asus P4B266-E - page 139

    ASUS P4B266-E motherboard user guide I-1 A Accelerated Graphics Port 2-15 Acrobat Reader 5-4 ASUS ASIC 1-9 ASUS EZ Plug ™ 1-3, 1-6 ASUS iPanel 1-4, 2-30 ASUS MyLogo ™ 1-3, 5-10 ASUS PC Probe 5-4 ASUS POST Reporter ™ 1-3, 1-7 ASUS Update 5-9 A T API CD-ROM 4-30 Audio controller 1-9 Automatic Power Up 4- 29 B BIOS Advanced Menu 4-15 Boot Menu 4 ...

  • Asus P4B266-E - page 140

    I-2 Index D DDR SDRAM technology 2-10 Digital audio interfaces S/PDIF 1-4 DIMM installing 2-1 1 removing 2-12 DIMM sockets 1-8 DIP switches 1-7, 2-17 Double Data Rate (DDR) memory 1- 2 E Expansion card installation 2-13 configuration 2-13 Expansion slots 1-10, 2-13 AGP 1-10 CNR 1-9 PCI 1-10 E-Color 3Deep 5-4 F Flash EEPROM 1-8 Floppy 3 Mode 4-8 H H ...

  • Asus P4B266-E - page 141

    ASUS P4B266-E motherboard user guide I-3 O Onboard LED 2-3 Operating system installation 5-1 Overclocking features 1-5 P Parallel Port 1-10, 4-21 Modes 4-21 Password Supervisor 4-14 User 4-14 PC-cillin 5-4 PCI Configuration 4-23 PCI Latency T imer 4-23 PCI/VGA Palette Snoop 4-23 PIO Mode 4-12 Plug & Play O/S 4-31 Power Management 4-25 Power On ...

  • Asus P4B266-E - page 142

    I-4 Index U UART2 4-23 Ultra DMA Mode 4-12 Universal Serial Bus (USB) 2.0 1-3 USB Legacy Support 4-17 USB ports 1-10 USWC 4-19 V Video Memory 4-20 Z ZIF socket 2-5 ...

Manufacturer Asus Category Computer Hardware

Documents that we receive from a manufacturer of a Asus P4B266-E can be divided into several groups. They are, among others:
- Asus technical drawings
- P4B266-E manuals
- Asus product data sheets
- information booklets
- or energy labels Asus P4B266-E
All of them are important, but the most important information from the point of view of use of the device are in the user manual Asus P4B266-E.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Asus P4B266-E, service manual, brief instructions and user manuals Asus P4B266-E. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Asus P4B266-E.

Similar manuals

A complete manual for the device Asus P4B266-E, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Asus P4B266-E by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Asus P4B266-E.

A complete Asus manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Asus P4B266-E - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Asus P4B266-E, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Asus P4B266-E, that we can find in the current document
3. Tips how to use the basic functions of the device Asus P4B266-E - which should help us in our first steps of using Asus P4B266-E
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Asus P4B266-E
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Asus P4B266-E in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Asus P4B266-E?

Use the form below

If you did not solve your problem by using a manual Asus P4B266-E, ask a question using the form below. If a user had a similar problem with Asus P4B266-E it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)