English dropdown-ico

Manual Mitsubishi Electronics FX3S-MT/ES

216 pages 5.28 mb
Download

Go to site of 216

Summary
  • Mitsubishi Electronics FX3S-MT/ES - page 1

    FX 3S SERIES PROGRAMMABLE CONTROLLERS USER'S MANUAL Hardware Edition Main Unit AC Power Type FX 3S -  MR/ES FX 3S -  MT/ES FX 3S -  MT/ESS FX 3S -30MR/ES-2AD FX 3S -30MT/ES-2AD FX 3S -30MT/ESS-2AD DC Power Type FX 3S -  MR/DS FX 3S -  MT/DS FX 3S -  MT/DSS Display Module FX 3S -5DM Memory Cassette FX 3G -EEPROM-32L ...

  • Mitsubishi Electronics FX3S-MT/ES - page 2

    ...

  • Mitsubishi Electronics FX3S-MT/ES - page 3

    Safety Precautions (Read these precautions before use.) (1) Before installation, operation, maintenance or inspection of this product, thoroughly read through and understand this manual and all of the associated manuals. Also, take care to handle the module prope rly and safely. This manual classifies the safety precautions into two categories: and ...

  • Mitsubishi Electronics FX3S-MT/ES - page 4

    Safety Precautions (Read these precautions before use.) (2) 2. INSTALLATION PRECAUTIONS Reference • Make sure to cu t off all phas es of the power supply external ly before att empting inst allation or wi ring work. Failure to do so may ca use electr ic shock or damage to t he product. 51 Reference • Use the produ ct within the generic enviro n ...

  • Mitsubishi Electronics FX3S-MT/ES - page 5

    Safety Precautions (Read these precautions before use.) (3) 3. WIRING PRECAUTIONS Reference • Make sure to cu t off all phas es of the power supply external ly before att empting inst allation or wi ring work. Failure to do so may ca use electr ic shock or damage to t he product. • Make sure to attach the termi nal cover, offe red as an accesso ...

  • Mitsubishi Electronics FX3S-MT/ES - page 6

    (4) Safety Precautions (Read these precautions before use.) 4. STARTUP AND MAINTEN ANCE PRECAUTION S 5. DISPOSAL PRECAUTIONS 6. TRANSPORTATION AND STORA GE PRECAUTION S Reference • Do not touch an y terminal whi le the PLC's powe r is on. Doing so may cause elec tric shock or malfunctio ns. • Before clea ning or retigh tening termi nals, c ...

  • Mitsubishi Electronics FX3S-MT/ES - page 7

    1 FX 3S Series Programmable Controllers User's Manual - Hardware Edition FX 3S Series Programmable Controllers User's Manual [Hardware Edition] Foreword This manual contains text, diagrams and explanations which will guide the reader in the correct installation, safe use and operation of the FX 3S Series Programmable Controllers and shoul ...

  • Mitsubishi Electronics FX3S-MT/ES - page 8

    2 FX 3S Series Programmable Controllers User's Manual - Hardware Edition Outline Precautions • This manual provides information for the use of the FX 3S Series Programmable Controllers. The manual has been written to be used by trained and competent personnel. The definition of such a person o r persons is as follows; a) Any engineer who is ...

  • Mitsubishi Electronics FX3S-MT/ES - page 9

    3 Table of Contents FX 3S Series Programmable Controllers User's Manual - Hardware Edition Table of Contents SAFETY PRECAUTIONS .................................................... .............................................. (1) Standards ................ .............. ........... .............. ........... .............. ............ .... ...

  • Mitsubishi Electronics FX3S-MT/ES - page 10

    4 Table of Contents FX 3S Series Programmable Controllers User's Manual - Hardware Edition 4.7 Terminal Layout ........................................................................................................... ................. 37 4.7.1 Interpretation of terminal block layout........... .............. ................. .............. ...

  • Mitsubishi Electronics FX3S-MT/ES - page 11

    5 Table of Contents FX 3S Series Programmable Controllers User's Manual - Hardware Edition 8. Preparation for Wiring and Power Supply Wiring Procedures 64 8.1 Preparation for Wiring ................................................................................................................... 66 8.1.1 Wiring procedures ................. .. ...

  • Mitsubishi Electronics FX3S-MT/ES - page 12

    6 Table of Contents FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11. Use of Built-in Analog 98 11.1 Outline .................................................................................................................. ....................... 99 11.2 Built-in variable analog potentiometer function ................ ...

  • Mitsubishi Electronics FX3S-MT/ES - page 13

    7 Table of Contents FX 3S Series Programmable Controllers User's Manual - Hardware Edition 14.3.3 Program modification func tion ................. .............. ........... .............. ........... .............. ......... ......... 130 14.4 Maintenance and Periodic Inspection ................................................................ ...

  • Mitsubishi Electronics FX3S-MT/ES - page 14

    8 Table of Contents FX 3S Series Programmable Controllers User's Manual - Hardware Edition 16.5.3 When "Input (X)", "Output (Y )", "Auxiliary relay (M)" or "State (S )" is selected ..... .............. ...... 158 16.5.4 When "Timer (T)" is selected ........... .............. .............. .... ...

  • Mitsubishi Electronics FX3S-MT/ES - page 15

    9 Table of Contents FX 3S Series Programmable Controllers User's Manual - Hardware Edition Appendix B: Instruction L ist 201 Appendix B-1 Basic Instructions ........ ................ ................. ............. ................ ................ ......... 201 Appendix B-2 Step Ladder Instructions ....... ................... ................ ...

  • Mitsubishi Electronics FX3S-MT/ES - page 16

    Standards 10 FX 3S Series Programmable Controllers User's Manual - Hardware Edition Standards Certification of UL, cUL standards FX 3S series main units, FX 3S series interface adapter and FX 3U series special adapters supporting UL, cUL standards are as follows: UL, cUL file number: E95239 Models: MELSEC FX 3S /FX 3U series manufactured Compl ...

  • Mitsubishi Electronics FX3S-MT/ES - page 17

    Standards 11 FX 3S Series Programmable Controllers User's Manual - Hardware Edition Requirement for Complianc e with LVD directive The following products have shown compliance through direct testing (of the identified standards below) and design analysis (through the creation of a technical construction file) to the European Directive for Low ...

  • Mitsubishi Electronics FX3S-MT/ES - page 18

    Standards 12 FX 3S Series Programmable Controllers User's Manual - Hardware Edition Caution for compliance with EC Directive 1. Installation in Enclosure Programmable logic controllers are open-type devices that must be installed and used within conductive control boxes. Please use the FX 3S Series programmable logic contro llers while install ...

  • Mitsubishi Electronics FX3S-MT/ES - page 19

    1 Introduction 1.1 Introduc tion of Manuals 13 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed C ...

  • Mitsubishi Electronics FX3S-MT/ES - page 20

    1 Introduction 1.1 Introduc tion of Manuals 14 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1.1.2 Manual organization a nd position of this manual This manual describes detail on the hardware, including the system configuration, installation and wiring. The instructions, communication control, analog control and posit ...

  • Mitsubishi Electronics FX3S-MT/ES - page 21

    1 Introduction 1.1 Introduc tion of Manuals 15 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed C ...

  • Mitsubishi Electronics FX3S-MT/ES - page 22

    1 Introduction 1.1 Introduc tion of Manuals 16 FX 3S Series Programmable Controllers User's Manual - Hardware Edition  RS-232C/RS- 422/RS-485 When using eac h product, re fer also to the User's Manual - Hardware Edit ion for the PLC m ain unit to be in stalled and FX Series User's Manual - Data Communication E dition. For th e MOD ...

  • Mitsubishi Electronics FX3S-MT/ES - page 23

    1 Introduction 1.1 Introduc tion of Manuals 17 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed C ...

  • Mitsubishi Electronics FX3S-MT/ES - page 24

    1 Introduction 1.2 Generic Names and Abbrevia tions Used in Manuals 18 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1.2 Generic Names and Abbr eviations Used in Manuals Abbreviation/ generic n ame Description PLCs FX 3S Series Generic name for FX 3S Series PLCs FX 3G Series Generic name for FX 3G Series PLCs FX 3U Ser ...

  • Mitsubishi Electronics FX3S-MT/ES - page 25

    2 Features and Part Nam es 2.1 Major Features 19 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed ...

  • Mitsubishi Electronics FX3S-MT/ES - page 26

    2 Features and Part Nam es 2.1 Major Features 20 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 3. Display functions (display module) (Supported in Ver. 1.20 or later) FX 3S -5DM Display Module (option) can be installed on the PLC. [Monitor/test fun ction] Devices can be monitored and tested by operating the buttons on ...

  • Mitsubishi Electronics FX3S-MT/ES - page 27

    2 Features and Part Nam es 2.2 Names and Functions of Parts 21 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring ...

  • Mitsubishi Electronics FX3S-MT/ES - page 28

    2 Features and Part Nam es 2.2 Names and Functions of Parts 22 FX 3S Series Programmable Controllers User's Manual - Hardware Edition When the top covers are open When the terminal block covers are open [1] Optional e quipment connector These holes are designe d to secure the expansi on board, di splay modul e and memory cassette wi th screws. ...

  • Mitsubishi Electronics FX3S-MT/ES - page 29

    2 Features and Part Nam es 2.2 Names and Functions of Parts 23 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring ...

  • Mitsubishi Electronics FX3S-MT/ES - page 30

    3 Introduction of Products 24 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 3.1 List of Products and Interpretat ion of Model Names 3. Introduction of Products 3.1 List of Products and Inte rpretation of Model Names The following system configuration is classified into pr oduct groups A to F in the product introduction ...

  • Mitsubishi Electronics FX3S-MT/ES - page 31

    3 Introduction of Products 25 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 3.1 List ...

  • Mitsubishi Electronics FX3S-MT/ES - page 32

    3 Introduction of Products 26 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 3.1 List of Products and Interpretat ion of Model Names 3.1.2 Expansion boards *1. Supported in FX 3S PLC Ver. 1.10 or later. 3.1.3 Connector conversion adapter 3.1.4 Special adapters *1. The FX 3U -ENET-ADP Ver. 1.20 or later is applicable to ...

  • Mitsubishi Electronics FX3S-MT/ES - page 33

    3 Introduction of Products 27 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 3.2 Conne ...

  • Mitsubishi Electronics FX3S-MT/ES - page 34

    3 Introduction of Products 28 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 3.2 Connector Types and Cables f or Program Communication 3.2.1 Programming tool The following programming tools support FX 3S Series PLCs.  For more information, re fer to 5. Version Inf ormation and Peripheral Eq uipment Connectabilit y ...

  • Mitsubishi Electronics FX3S-MT/ES - page 35

    29 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 4 Specifications, E xternal Dimensio ...

  • Mitsubishi Electronics FX3S-MT/ES - page 36

    30 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 4 Specifications, E xternal Dimensions and Te rminal Layout (Main Units) 4.2 Power Supply Sp ecifications 4.1.1 Dielectric withsta nd voltage test and insu lation resistance test Perform dielectric withstand voltage test and insulation resistance test at the following vo ...

  • Mitsubishi Electronics FX3S-MT/ES - page 37

    31 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 4 Specifications, E xternal Dimensio ...

  • Mitsubishi Electronics FX3S-MT/ES - page 38

    32 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 4 Specifications, E xternal Dimensions and Te rminal Layout (Main Units) 4.4 Output Speci fications 4.4 Output Specifications The output specifications for the main unit are explained below. 4.4.1 Relay output specific ations Item Relay outpu t specifi cation FX 3S -10MR ...

  • Mitsubishi Electronics FX3S-MT/ES - page 39

    33 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 4 Specifications, E xternal Dimensio ...

  • Mitsubishi Electronics FX3S-MT/ES - page 40

    34 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 4 Specifications, E xternal Dimensions and Te rminal Layout (Main Units) 4.5 Performance Specifications 4.5 Performance Specifications The performance specifications for the main unit are explained below. Item Performance Operation control system Stored progr am repetiti ...

  • Mitsubishi Electronics FX3S-MT/ES - page 41

    35 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 4 Specifications, E xternal Dimensio ...

  • Mitsubishi Electronics FX3S-MT/ES - page 42

    36 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 4 Specifications, E xternal Dimensions and Te rminal Layout (Main Units) 4.6 External Dimensions (Wei ght/Accessories/Inst allation) 4.6 External Dimensions (Weight/Accessories/Installation) The external dimensions of the main unit are explained. 4.6.1 Main units 1) Acce ...

  • Mitsubishi Electronics FX3S-MT/ES - page 43

    37 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 4 Specifications, E xternal Dimensio ...

  • Mitsubishi Electronics FX3S-MT/ES - page 44

    38 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 4 Specifications, E xternal Dimensions and Te rminal Layout (Main Units) 4.7 Terminal Layout 4.7.2 FX 3S -10M  • AC power type • DC power type 4.7.3 FX 3S -14M  • AC power type • DC power type S/S N L X1 X2 X3 X4 X5 Y2 Y0 COM 1 COM2 COM0 COM3 Y3 FX 3S -10MR ...

  • Mitsubishi Electronics FX3S-MT/ES - page 45

    39 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 4 Specifications, E xternal Dimensio ...

  • Mitsubishi Electronics FX3S-MT/ES - page 46

    40 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 5 Version Information and Peripheral Eq uipment Connecta bility 5.1 Version Informat ion 5. Version Information and Peripheral Equipment Connectability 5.1 Version Information 5.1.1 Manufacturer's serial number check method The year and month of production of the pr ...

  • Mitsubishi Electronics FX3S-MT/ES - page 47

    41 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 5 Version Information and Peripheral ...

  • Mitsubishi Electronics FX3S-MT/ES - page 48

    42 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 5 Version Information and Peripheral Eq uipment Connecta bility 5.2 Programming Tool Appli cability 5.2.3 Program transfer sp eed and programming tools 1. Built-in USB communication The FX 3S PLC has a built-in USB communication port, and performs program writing, progra ...

  • Mitsubishi Electronics FX3S-MT/ES - page 49

    43 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 5 Version Information and Peripheral ...

  • Mitsubishi Electronics FX3S-MT/ES - page 50

    44 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 5 Version Information and Peripheral Eq uipment Connecta bility 5.2 Programming Tool Appli cability Item Caution Circuit bloc ks which requ ire attentio n on opera tion afte r write during RU N Avoid write during RUN to a circuit block inclu din g the following instr uct ...

  • Mitsubishi Electronics FX3S-MT/ES - page 51

    45 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 5 Version Information and Peripheral ...

  • Mitsubishi Electronics FX3S-MT/ES - page 52

    46 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 5 Version Information and Peripheral Eq uipment Connecta bility 5.4 Cautions on using FA transparent function in GOT1000 Series 5.4 Cautions on using FA transp arent function in GOT1000 Series When monitoring circuits, device monitor, etc. or reading/writing programs in ...

  • Mitsubishi Electronics FX3S-MT/ES - page 53

    47 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 5 Version Information and Peripheral ...

  • Mitsubishi Electronics FX3S-MT/ES - page 54

    48 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 5 Version Information and Peripheral Eq uipment Connecta bility 5.6 Other Peripheral Equipment Appli cability 5.6 Other Peripheral Equipment Applicability 5.6.1 Other peripheral equipment applicability Model name Appl icability Remar ks GOT1000 Seri es Applicable Standar ...

  • Mitsubishi Electronics FX3S-MT/ES - page 55

    6 Examination of System C onfiguration 6.1 Configurati on of a Whole System 49 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng ...

  • Mitsubishi Electronics FX3S-MT/ES - page 56

    6 Examination of System C onfiguration 6.1 Configurati on of a Whole System 50 FX 3S Series Programmable Controllers User's Manual - Hardware Edition Restrictions in the use of the FX 3G -422-BD When connecting a device (such as GOT) which consumes an internal 5 V DC to each of the RS-422 port built in the main unit and the FX 3G -422-BD at th ...

  • Mitsubishi Electronics FX3S-MT/ES - page 57

    7 Installation In Enclosure 51 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 7. Insta ...

  • Mitsubishi Electronics FX3S-MT/ES - page 58

    7 Installation In Enclosure 52 FX 3S Series Programmable Controllers User's Manual - Hardware Edition WIRING PRECAUTIONS • Make sure to cu t off all phas es of the power supply external ly before att empting inst allation or wi ring work. Failure to do so may ca use electr ic shock or damage to t he product. • Make sure to attach the term ...

  • Mitsubishi Electronics FX3S-MT/ES - page 59

    7 Installation In Enclosure 53 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 7.1 Inst ...

  • Mitsubishi Electronics FX3S-MT/ES - page 60

    7 Installation In Enclosure 54 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 7.2 Examination for Installing Method in En closure 7.2 Examination for Installi ng Method in Enclosure Examine the installation location of PLC in consideration of the environmental conditions (generic specifications). The PLC can be installe ...

  • Mitsubishi Electronics FX3S-MT/ES - page 61

    7 Installation In Enclosure 55 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 7.3 Proc ...

  • Mitsubishi Electronics FX3S-MT/ES - page 62

    7 Installation In Enclosure 56 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 7.3 Procedures for Install ing on and Detaching from DIN Rail 7.3.3 Removal of main unit Removal procedure 1 Open the terminal bloc k cover , and remove the lower terminal block cover (A in the right figure). 2 Disconnect the connecting cables ...

  • Mitsubishi Electronics FX3S-MT/ES - page 63

    7 Installation In Enclosure 57 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 7.4 Proc ...

  • Mitsubishi Electronics FX3S-MT/ES - page 64

    7 Installation In Enclosure 58 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 7.5 Connecting Methods for Main Unit and Extensi on Devices 7.4.2 Example of m ounting hole pitches The figure below shows an example when the FX 3S -30MT/ES, FX 3S -CNV-ADP and FX 3U -232ADP(-MB) are used. 7.4.3 Installation of main unit Moun ...

  • Mitsubishi Electronics FX3S-MT/ES - page 65

    7 Installation In Enclosure 59 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 7.5 Conn ...

  • Mitsubishi Electronics FX3S-MT/ES - page 66

    7 Installation In Enclosure 60 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 7.5 Connecting Methods for Main Unit and Extensi on Devices 7.5.3 Connecting method B - connection of connector conversion adapter This subsection explains how to connect the connector conversion adapter to the main unit. Connection procedure ...

  • Mitsubishi Electronics FX3S-MT/ES - page 67

    7 Installation In Enclosure 61 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 7.5 Conn ...

  • Mitsubishi Electronics FX3S-MT/ES - page 68

    7 Installation In Enclosure 62 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 7.6 Application of l abels 7.6 Application of labels The label is packed together with the expansion board (FX 3G -485-BD, FX 3G -485-BD-RJ, FX 3G -8AV- BD). Place it in a position where it can be seen easily for simple reference. 7.6.1 Applic ...

  • Mitsubishi Electronics FX3S-MT/ES - page 69

    7 Installation In Enclosure 63 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 7.6 Appl ...

  • Mitsubishi Electronics FX3S-MT/ES - page 70

    64 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 8 Prepar ation for Wi ring and Po wer Supply Wiring Proc edures 8. Preparation for Wiring and Power Supply Wiring Procedures DESIGN PRECAUTIONS • Make sure to have the followi ng safety circu its outsid e of the PLC to ensure safe system oper ation even dur ing externa ...

  • Mitsubishi Electronics FX3S-MT/ES - page 71

    65 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 8 Prepar ation for Wi ring and Po we ...

  • Mitsubishi Electronics FX3S-MT/ES - page 72

    66 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 8 Prepar ation for Wi ring and Po wer Supply Wiring Proc edures 8.1 Preparation for Wiri ng 8.1 Preparation for Wiring 8.1.1 Wiring procedures Before starting wiring work, make sure that the main power is off. 1 Prep are the p art s for wiring. Prepare the solderless ter ...

  • Mitsubishi Electronics FX3S-MT/ES - page 73

    67 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 8 Prepar ation for Wi ring and Po we ...

  • Mitsubishi Electronics FX3S-MT/ES - page 74

    68 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 8 Prepar ation for Wi ring and Po wer Supply Wiring Proc edures 8.2 Cable Conn ecting Procedures 8.2.2 Terminal block (for European) [e xpansion board and special adapters] The expansion boards and special adapters of a terminal block type have terminal blocks for Europe ...

  • Mitsubishi Electronics FX3S-MT/ES - page 75

    69 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 8 Prepar ation for Wi ring and Po we ...

  • Mitsubishi Electronics FX3S-MT/ES - page 76

    70 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 8 Prepar ation for Wi ring and Po wer Supply Wiring Proc edures 8.2 Cable Conn ecting Procedures 8.2.4 Grounding terminal of the FX 3U -ENET-ADP The grounding terminal of the FX 3U -ENET-ADP is a M2.5 screw. 1. Applicable cables 2. Treatment of electric wire ends • Whe ...

  • Mitsubishi Electronics FX3S-MT/ES - page 77

    71 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 8 Prepar ation for Wi ring and Po we ...

  • Mitsubishi Electronics FX3S-MT/ES - page 78

    72 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 8 Prepar ation for Wi ring and Po wer Supply Wiring Proc edures 8.4 Examples of External Wiring [AC powe r type] 8.4 Examples of External Wiring [AC power type] 24 V DC service power supply of the main unit can be used as a power supply for loads. *1. Connect the AC powe ...

  • Mitsubishi Electronics FX3S-MT/ES - page 79

    73 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 8 Prepar ation for Wi ring and Po we ...

  • Mitsubishi Electronics FX3S-MT/ES - page 80

    9 Input Wiring Procedures 74 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 9. Input Wiring Procedures DESIGN PRECAUTIONS • Make sure to have the followi ng safety circu its outsid e of the PLC to ensure safe system oper ation even dur ing external po wer supply problems or PLC failur e. Otherwise, malfunctions may ca ...

  • Mitsubishi Electronics FX3S-MT/ES - page 81

    9 Input Wiring Procedures 75 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters WIRING PRE ...

  • Mitsubishi Electronics FX3S-MT/ES - page 82

    9 Input Wiring Procedures 9.1 Before Starti ng Input Wiring 76 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 9.1 Before Starti ng Input Wiring 9.1.1 Sink and source input The input terminals (X) of the main unit are common to sink/source input of 24 V DC internal power. 1. Differences between the sink input circuit and ...

  • Mitsubishi Electronics FX3S-MT/ES - page 83

    9 Input Wiring Procedures 9.2 24 V DC input (Sink and source input t ype) 77 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 ...

  • Mitsubishi Electronics FX3S-MT/ES - page 84

    9 Input Wiring Procedures 9.2 24 V DC input (Sink and source input t ype) 78 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 3. Input sensitivity The PLC input current and input sensitivity are shown in the following table. When there is a series diode or resistance at the input contact or there is a parallel resistance ...

  • Mitsubishi Electronics FX3S-MT/ES - page 85

    9 Input Wiring Procedures 9.2 24 V DC input (Sink and source input t ype) 79 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 ...

  • Mitsubishi Electronics FX3S-MT/ES - page 86

    9 Input Wiring Procedures 9.2 24 V DC input (Sink and source input t ype) 80 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 9.2.3 Examples of external wiring [AC power type] 1. Sink input 2. Source input *1. Handle the power supply circuit correctly in a ccordance with Chapter 8 "Preparation for Wiring and Power Su ...

  • Mitsubishi Electronics FX3S-MT/ES - page 87

    9 Input Wiring Procedures 9.2 24 V DC input (Sink and source input t ype) 81 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 ...

  • Mitsubishi Electronics FX3S-MT/ES - page 88

    9 Input Wiring Procedures 9.3 Input Int erruption (I00  to I50  ) 82 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 9.3 Input Interruption (I00  to I50  ) The main unit is provided with an input interruption function and has 6 interruption input points. Make sure that the ON duration or OFF duration of inter ...

  • Mitsubishi Electronics FX3S-MT/ES - page 89

    9 Input Wiring Procedures 9.3 Input Int erruption (I00  to I50  ) 83 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 I ...

  • Mitsubishi Electronics FX3S-MT/ES - page 90

    9 Input Wiring Procedures 9.4 Pulse Catch (M8170 to M8175) 84 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 9.4 Pulse Catch (M8170 to M8175) The main unit is provided with a pulse catch function and has 6 pulse catch input points.  For details on progr amming, refer to the pr ogramming manual. 9.4.1 Allocation of ...

  • Mitsubishi Electronics FX3S-MT/ES - page 91

    9 Input Wiring Procedures 9.4 Pulse Catch (M8170 to M8175) 85 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 1 ...

  • Mitsubishi Electronics FX3S-MT/ES - page 92

    10 Use of Hi gh-speed Coun ters 86 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 10.1 Outline 10. Use of High-speed Counters 10.1 Outline High-speed counters use input terminals (X000 to X007) of the main unit for inputs, and offer counting up to 60 kHz (1-phase). Input terminals not used for high-speed counters are av ...

  • Mitsubishi Electronics FX3S-MT/ES - page 93

    10 Use of Hi gh-speed Coun ters 87 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 10.3 ...

  • Mitsubishi Electronics FX3S-MT/ES - page 94

    10 Use of Hi gh-speed Coun ters 88 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 10.4 Allocation of Device Numbers to Input Numbers 10.4 Allocation of Device Numbers to Input Numbers The high-speed counter numbers are allo cated to the input terminals X000 to X007 as shown in the following table. The input terminals no ...

  • Mitsubishi Electronics FX3S-MT/ES - page 95

    10 Use of Hi gh-speed Coun ters 89 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 10.5 ...

  • Mitsubishi Electronics FX3S-MT/ES - page 96

    10 Use of Hi gh-speed Coun ters 90 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 10.5 Handling of High-speed Co unters • C235 is set to the up-count or down-count mode through interruption by the count input X000. • When the current value increases from -6 to -5, the output contact is set, and when the value decrea ...

  • Mitsubishi Electronics FX3S-MT/ES - page 97

    10 Use of Hi gh-speed Coun ters 91 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 10.5 ...

  • Mitsubishi Electronics FX3S-MT/ES - page 98

    10 Use of Hi gh-speed Coun ters 92 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 10.6 Timing of Updati ng of Current Value and Comparison of Current Value 10.6 Timing of Updating of Current Va lue and Comparison of Current Value 10.6.1 Timing of updating of current value When pulses are input to an input terminal for a ...

  • Mitsubishi Electronics FX3S-MT/ES - page 99

    10 Use of Hi gh-speed Coun ters 93 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 10.7 ...

  • Mitsubishi Electronics FX3S-MT/ES - page 100

    10 Use of Hi gh-speed Coun ters 94 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 10.8 Examples of External Wirin g (Rotary Encoder) 10.8 Examples of External Wiring (Rotary Encoder) 10.8.1 1-phase 1-input [C235 to C245] The following examples of wiring apply to the cases where C235 is used. When another high-speed coun ...

  • Mitsubishi Electronics FX3S-MT/ES - page 101

    10 Use of Hi gh-speed Coun ters 95 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 10.8 ...

  • Mitsubishi Electronics FX3S-MT/ES - page 102

    10 Use of Hi gh-speed Coun ters 96 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 10.9 Related Devices and Func tion Switching Procedures 10.9 Related Devices and Function Switching Procedures 10.9.1 Related devices 1. For switching 1-phase 1-count inpu t counter mode to up-count or down-count 2. For monitoring of up-co ...

  • Mitsubishi Electronics FX3S-MT/ES - page 103

    10 Use of Hi gh-speed Coun ters 97 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 Introduction 2 Features and Part Names 3 Product Introduction 4 S pecificatio ns 5 V ersion and Peripheral Device s 6 System Configuration 7 Insta llation 8 Preparation and Power Supply Wiri ng 9 Input Wiring 10 High-S peed Counters 10.1 ...

  • Mitsubishi Electronics FX3S-MT/ES - page 104

    11 Use o f Built-in An alog 98 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11. Use of Built-in Analog WIRING PRECAUTIONS • Make sure to cu t off all phas es of the power supply external ly before att empting inst allation or wi ring work. Failure to do so may ca use electr ic shock or damage to t he product. WIRING ...

  • Mitsubishi Electronics FX3S-MT/ES - page 105

    11 Use o f Built-in An alog 99 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instruct ...

  • Mitsubishi Electronics FX3S-MT/ES - page 106

    11 Use o f Built-in An alog 100 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11.2 Built-in varia ble analog potentio meter function 11.2.4 Use example of variable analog potentiometer 1. Example 1 The current value of VR1 is used as the set value of a timer (T0). 2. Example 2 The current value of VR2 multiplied by &qu ...

  • Mitsubishi Electronics FX3S-MT/ES - page 107

    11 Use o f Built-in An alog 101 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instruc ...

  • Mitsubishi Electronics FX3S-MT/ES - page 108

    11 Use o f Built-in An alog 102 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11.3 Built-in analog input functi on 11.3.4 Analog input terminal block The analog inputs use a European terminal block. Use the following cables to connect with the counterpart equipment. Termina te the cable ends as shown below. 1. Wire siz ...

  • Mitsubishi Electronics FX3S-MT/ES - page 109

    11 Use o f Built-in An alog 103 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instruc ...

  • Mitsubishi Electronics FX3S-MT/ES - page 110

    11 Use o f Built-in An alog 104 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11.3 Built-in analog input functi on 2. Averaging tim e If the averaging time is set in the PLC, the averaged data will be stored as the input data. The averaging time can be set for each channel. Set the averaging time in the following speci ...

  • Mitsubishi Electronics FX3S-MT/ES - page 111

    11 Use o f Built-in An alog 105 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instruc ...

  • Mitsubishi Electronics FX3S-MT/ES - page 112

    11 Use o f Built-in An alog 106 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11.3 Built-in analog input functi on 11.3.10 Troubleshooting when using built-in analog input This subsection describes troubleshooting methods and error statuses. If the A/D conversion data is not input, or if the proper digital value is not ...

  • Mitsubishi Electronics FX3S-MT/ES - page 113

    11 Use o f Built-in An alog 107 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instruc ...

  • Mitsubishi Electronics FX3S-MT/ES - page 114

    12 Output Wiring P rocedures 108 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 12. Output Wiring Procedures DESIGN PRECAUTIONS • Make sure to have the followi ng safety circu its outsid e of the PLC to ensure safe system oper ation even dur ing external po wer supply problems or PLC failur e. Otherwise, malfunctions ...

  • Mitsubishi Electronics FX3S-MT/ES - page 115

    12 Output Wiring P rocedures 109 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instru ...

  • Mitsubishi Electronics FX3S-MT/ES - page 116

    12 Output Wiring P rocedures 110 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 12.1 External Wiring for Relay Ou tput Type 12.1 External Wiring fo r Relay Output Type This section explains "handling of relay output", "external wiring precautions" and "example of external wiring".  Fo ...

  • Mitsubishi Electronics FX3S-MT/ES - page 117

    12 Output Wiring P rocedures 111 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instru ...

  • Mitsubishi Electronics FX3S-MT/ES - page 118

    12 Output Wiring P rocedures 112 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 12.1 External Wiring for Relay Ou tput Type 12.1.4 Example of external wiring *1. The output circuit of this PLC does not have a built-in fuse. Provide a fuse suit able to each lo ad to prevent b lowout of the wi res on the c ircuit board ca ...

  • Mitsubishi Electronics FX3S-MT/ES - page 119

    12 Output Wiring P rocedures 113 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instru ...

  • Mitsubishi Electronics FX3S-MT/ES - page 120

    12 Output Wiring P rocedures 114 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 2.2 External Wiring of Transistor Output (Sink/Source) Type 2. External power supply For driving the load, use a smoothing power supply of 5 to 30 V DC that can output current two or more times the rated current of the fuse connected to th ...

  • Mitsubishi Electronics FX3S-MT/ES - page 121

    12 Output Wiring P rocedures 115 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instru ...

  • Mitsubishi Electronics FX3S-MT/ES - page 122

    12 Output Wiring P rocedures 116 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 1 2.2 External Wiring of Transistor Output (Sink/Source) Type 12.2.4 Example of external wiring 1. Transistor output (Sink) *1. The output circuit of this PLC does not have a built-in fuse. Provide a fuse suit able to each lo ad to prevent b ...

  • Mitsubishi Electronics FX3S-MT/ES - page 123

    12 Output Wiring P rocedures 117 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instru ...

  • Mitsubishi Electronics FX3S-MT/ES - page 124

    13 Examples of Wiring for Various Uses 118 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 13. Examples of Wiring for Various Uses DESIGN PRECAUTIONS • Make sure to have the followi ng safety circu its outsid e of the PLC to ensure safe system oper ation even dur ing external po wer supply problems or PLC failur e. Oth ...

  • Mitsubishi Electronics FX3S-MT/ES - page 125

    13 Examples of Wiring for Various Uses 119 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000- ...

  • Mitsubishi Electronics FX3S-MT/ES - page 126

    13 Examples of Wiring for Various Uses 120 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 13.2 Digital Switch [DSW Instruction (FNC 72)/BIN Instruct ion (FNC 19)] 13.2 Digital Switch [DSW Instructio n (FNC 72)/BIN Instruction (FNC 19)] 13.2.1 When DSW instruction (FNC 72) is used Examples of wiring for capturing values ...

  • Mitsubishi Electronics FX3S-MT/ES - page 127

    13 Examples of Wiring for Various Uses 121 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000- ...

  • Mitsubishi Electronics FX3S-MT/ES - page 128

    13 Examples of Wiring for Various Uses 122 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 13.3 Input Matrix [MTR I nstruction ( FNC 52)] 13.3 Input Matrix [MTR Instruction (FNC 52)] This section gives examples of wiring for capturing the ON/OFF status of 24 switches to M30 to M37, M40 to M47 and M50 to M57 using MTR ins ...

  • Mitsubishi Electronics FX3S-MT/ES - page 129

    13 Examples of Wiring for Various Uses 123 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000- ...

  • Mitsubishi Electronics FX3S-MT/ES - page 130

    13 Examples of Wiring for Various Uses 124 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 13.4 Seven Segment with Latch [SEGL Instruction (FNC 74)/ BCD Instruction (FNC 18)] 13.4.2 When BCD instruction (FNC 18) is used This subsection gives examples of wiring for displa ying the current value of D100 on the 2-digit 7-se ...

  • Mitsubishi Electronics FX3S-MT/ES - page 131

    125 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instruction List C Discontinued mod ...

  • Mitsubishi Electronics FX3S-MT/ES - page 132

    126 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 14 Test Operation , Adjustment, Maintena nce and Tro ubleshooting 14.1 Preparation for Te st Operation 14.1 Preparation for Test Operation 14.1.1 Preliminary inspection [power OFF] Incorrect connection of the power supply terminal, contact of the DC input wire and power ...

  • Mitsubishi Electronics FX3S-MT/ES - page 133

    127 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instruction List C Discontinued mod ...

  • Mitsubishi Electronics FX3S-MT/ES - page 134

    128 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 14 Test Operation , Adjustment, Maintena nce and Tro ubleshooting 14.2 Running and Sto pping Procedures [ Power ON] 14.2 Running and Stopping Procedures [Power ON] 14.2.1 Methods of running and stopping FX 3S PLCs can be started or stopped by any of the following three ...

  • Mitsubishi Electronics FX3S-MT/ES - page 135

    129 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instruction List C Discontinued mod ...

  • Mitsubishi Electronics FX3S-MT/ES - page 136

    130 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 14 Test Operation , Adjustment, Maintena nce and Tro ubleshooting 14.3 Operation and Test [Power ON and PLC Runni ng] 14.3 Operation and Test [Pow er ON and PLC Running] 14.3.1 Self-diagnostic function When the PLC’s power is turned on, its self-diagnostic f unction s ...

  • Mitsubishi Electronics FX3S-MT/ES - page 137

    131 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instruction List C Discontinued mod ...

  • Mitsubishi Electronics FX3S-MT/ES - page 138

    132 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 14 Test Operation , Adjustment, Maintena nce and Tro ubleshooting 14.5 Troubleshooti ng with LEDs 14.5 Troubleshooting with LEDs When trouble occurs, check the LEDs on the PLC to identify the problem with the PLC. 14.5.1 POW LED [on/flashing/off] 14.5.2 ERR LED [on/flas ...

  • Mitsubishi Electronics FX3S-MT/ES - page 139

    133 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instruction List C Discontinued mod ...

  • Mitsubishi Electronics FX3S-MT/ES - page 140

    134 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 14 Test Operation , Adjustment, Maintena nce and Tro ubleshooting 14.6 Judgment by Error Codes and Representation of Error Codes 14.6.2 Representation of errors Errors are represented in this manual and GX Works2 as shown in the following table. This manu al GX Works2 P ...

  • Mitsubishi Electronics FX3S-MT/ES - page 141

    135 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instruction List C Discontinued mod ...

  • Mitsubishi Electronics FX3S-MT/ES - page 142

    136 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 14 Test Operation , Adjustment, Maintena nce and Tro ubleshooting 14.6 Judgment by Error Codes and Representation of Error Codes Parameter er ror [M80 64 (D8064)] 0000 - No error 6401 Stops operation Program sum c heck erro r STOP the PLC, and co rrectly set the paramet ...

  • Mitsubishi Electronics FX3S-MT/ES - page 143

    137 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instruction List C Discontinued mod ...

  • Mitsubishi Electronics FX3S-MT/ES - page 144

    138 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 14 Test Operation , Adjustment, Maintena nce and Tro ubleshooting 14.6 Judgment by Error Codes and Representation of Error Codes Operation e rror [M8067 (D8067)] 6740 Continues operation Sampling time (T S )  Scan time <Auto tuning is co ntinued.> The operatio ...

  • Mitsubishi Electronics FX3S-MT/ES - page 145

    139 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instruction List C Discontinued mod ...

  • Mitsubishi Electronics FX3S-MT/ES - page 146

    140 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 14 Test Operation , Adjustment, Maintena nce and Tro ubleshooting 14.7 Troubleshooti ng 14.7 Troubleshooting  For the procedure s on running and stopp ing the PLC, refer to Section 14.2.  For the procedures on operating pe ripheral devices, refer to the ma n ...

  • Mitsubishi Electronics FX3S-MT/ES - page 147

    141 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instruction List C Discontinued mod ...

  • Mitsubishi Electronics FX3S-MT/ES - page 148

    15.1 Special Adapt ers 142 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 15 Other Extens ion Devices and Optiona l Units (E xternal Dime nsions and Terminal Arra ngement) 15. Other Extension Devices and Optional Units (External Dimensions and Terminal Arrangement) 15.1 Special Adapters 15.1.1 FX 3U -4AD-ADP External Di ...

  • Mitsubishi Electronics FX3S-MT/ES - page 149

    15.1 Special Adapt ers 143 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instruction ...

  • Mitsubishi Electronics FX3S-MT/ES - page 150

    15.1 Special Adapt ers 144 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 15 Other Extens ion Devices and Optiona l Units (E xternal Dime nsions and Terminal Arra ngement) 15.1.6 FX 3U -4AD-TC-ADP External Dimensions, Terminal Layout • MASS (Weight): Approx. 0.1 kg (0.22 lbs) • Installation: DIN rail of 35 mm (1.38& ...

  • Mitsubishi Electronics FX3S-MT/ES - page 151

    15.1 Special Adapt ers 145 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instruction ...

  • Mitsubishi Electronics FX3S-MT/ES - page 152

    15.2 Expansion Board 146 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 15 Other Extens ion Devices and Optiona l Units (E xternal Dime nsions and Terminal Arra ngement) 15.2 Expansion Board 15.2.1 FX 3G -4EX- BD External Dimensions • MASS(Weight): Approx. 20g (0.05lbs) • Accessories: Two M3×8 tapping screws (for i ...

  • Mitsubishi Electronics FX3S-MT/ES - page 153

    15.2 Expansion Board 147 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instruction Li ...

  • Mitsubishi Electronics FX3S-MT/ES - page 154

    15.2 Expansion Board 148 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 15 Other Extens ion Devices and Optiona l Units (E xternal Dime nsions and Terminal Arra ngement) 15.2.5 FX 3G -485-BD External Dimensions • MASS (Weight): Approx. 20 g (0.05 lbs) • Accessories: Two M3×8 tapping screws (for installation of boar ...

  • Mitsubishi Electronics FX3S-MT/ES - page 155

    15.2 Expansion Board 149 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instruction Li ...

  • Mitsubishi Electronics FX3S-MT/ES - page 156

    15.2 Expansion Board 150 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 15 Other Extens ion Devices and Optiona l Units (E xternal Dime nsions and Terminal Arra ngement) 15.2.9 FX 3G -8AV-BD External Dimensions • MASS (Weight): Approx. 20 g (0.05 lbs) • Accessories: Two M3×8 tapping screws (for installation of boar ...

  • Mitsubishi Electronics FX3S-MT/ES - page 157

    15.3 Connector Conversion Adapt er 151 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B ...

  • Mitsubishi Electronics FX3S-MT/ES - page 158

    16 Display Modu le (FX3S-5DM) 152 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 16.1 Specifi cations 16. Display Module (FX 3S -5DM) 16.1 Specifications 16.1.1 Applicable PLC 16.1.2 Display Specifications STARTUP AND MAINTENANCE PRECAUTIONS • Before modi fying or disrupting t he program in operati on or running the P ...

  • Mitsubishi Electronics FX3S-MT/ES - page 159

    16 Display Modu le (FX3S-5DM) 153 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instr ...

  • Mitsubishi Electronics FX3S-MT/ES - page 160

    16 Display Modu le (FX3S-5DM) 154 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 16.2 Inst allation an d Removal 16.2.2 Installation and Removal (when the expansion board/connector c onversion adapter is used together) The FX 3S -30MT/ES is used as the main unit and the expansion board is used together in this example. ...

  • Mitsubishi Electronics FX3S-MT/ES - page 161

    16 Display Modu le (FX3S-5DM) 155 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instr ...

  • Mitsubishi Electronics FX3S-MT/ES - page 162

    16 Display Modu le (FX3S-5DM) 156 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 16.4 Flowing of the Screen Display 16.4 Flowing of the Screen Display Press the [OK] button Press other button of the display module Error occurrence Time display Selecting a device Monitor/test Time setting  Refer to Section 16.6. Error ...

  • Mitsubishi Electronics FX3S-MT/ES - page 163

    16 Display Modu le (FX3S-5DM) 157 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instr ...

  • Mitsubishi Electronics FX3S-MT/ES - page 164

    16 Display Modu le (FX3S-5DM) 158 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 16.5 Monito r/Test 16.5.3 When "Input (X)", "Output (Y)", "Auxiliary relay (M)" or "State (S)" is selected "Input (X)", "Output (Y)", "Auxiliary relay (M)" and "Stat ...

  • Mitsubishi Electronics FX3S-MT/ES - page 165

    16 Display Modu le (FX3S-5DM) 159 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instr ...

  • Mitsubishi Electronics FX3S-MT/ES - page 166

    16 Display Modu le (FX3S-5DM) 160 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 16.5 Monito r/Test 16.5.4 When "Timer (T)" is selected Monitoring and testing can be performed for the timer (T). 1. Description of display *1. Displayed when a hexadecimal is specified. *2. Displayed while timer (T) is ON. *3. Di ...

  • Mitsubishi Electronics FX3S-MT/ES - page 167

    16 Display Modu le (FX3S-5DM) 161 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instr ...

  • Mitsubishi Electronics FX3S-MT/ES - page 168

    16 Display Modu le (FX3S-5DM) 162 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 16.5 Monito r/Test 16.5.5 When "Counter (C)" is selected Monitoring and testing can be performed for the counter (C). 1. Description of display *1. Displayed when hexadecimal is specified. *2. Displayed while counter (C) is ON. *3 ...

  • Mitsubishi Electronics FX3S-MT/ES - page 169

    16 Display Modu le (FX3S-5DM) 163 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instr ...

  • Mitsubishi Electronics FX3S-MT/ES - page 170

    16 Display Modu le (FX3S-5DM) 164 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 16.5 Monito r/Test 16.5.6 When "Data register (D)" is selected Monitoring and testing can be perfo rmed for the data register (D). 1. Description of display *1. Displayed when hexadecimal is specified. *2. In the case of 16-bit da ...

  • Mitsubishi Electronics FX3S-MT/ES - page 171

    16 Display Modu le (FX3S-5DM) 165 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instr ...

  • Mitsubishi Electronics FX3S-MT/ES - page 172

    16 Display Modu le (FX3S-5DM) 166 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 16.6 Time Dis play and Settin g 16.6 Time Display and Setting Display and setting can be performed for the current time. 1. Time display Year, month, day, hour and minute are displayed when the power is turned ON. 2. Time setting 1) Press a ...

  • Mitsubishi Electronics FX3S-MT/ES - page 173

    16 Display Modu le (FX3S-5DM) 167 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instr ...

  • Mitsubishi Electronics FX3S-MT/ES - page 174

    16 Display Modu le (FX3S-5DM) 168 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 16.9 Specifie d Device Monitor Fu nction 16.8.2 System information setting program example The following is a program example in which the system information has been assigned to D130 to D134 and M400 to M414. 16.9 Specified Devi ce Monitor ...

  • Mitsubishi Electronics FX3S-MT/ES - page 175

    16 Display Modu le (FX3S-5DM) 169 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instr ...

  • Mitsubishi Electronics FX3S-MT/ES - page 176

    16 Display Modu le (FX3S-5DM) 170 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 16.9 Specifie d Device Monitor Fu nction 16.9.3 Program example2 (when monitoring consecutive timers using operation button) In this program example, the device type to be displayed on the specified device monitor screen is set to "tim ...

  • Mitsubishi Electronics FX3S-MT/ES - page 177

    16 Display Modu le (FX3S-5DM) 171 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instr ...

  • Mitsubishi Electronics FX3S-MT/ES - page 178

    16 Display Modu le (FX3S-5DM) 172 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 16.9 Specifie d Device Monitor Fu nction 16.9.5 Specified devi ce editing function Devices displayed in the specified device monitor function can be edited. 1. System signal 1 *1. Maximum or minimum value of the corresponding device if the ...

  • Mitsubishi Electronics FX3S-MT/ES - page 179

    16 Display Modu le (FX3S-5DM) 173 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instr ...

  • Mitsubishi Electronics FX3S-MT/ES - page 180

    16 Display Modu le (FX3S-5DM) 174 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 16.10 Back l ight off functio n 16.10 Back light off function Use this function to turn OFF the backlight after the specified time. The initial value is "10 minutes". The backl ight will turn OFF 10 minutes later if the backlight ...

  • Mitsubishi Electronics FX3S-MT/ES - page 181

    16 Display Modu le (FX3S-5DM) 175 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instr ...

  • Mitsubishi Electronics FX3S-MT/ES - page 182

    16 Display Modu le (FX3S-5DM) 176 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 16.13 Operati on Button ON/OFF Infor mation 16.13 Operation Button ON/OFF Information Operation button ON/OFF information can be monitored at the system information (system signal 2) "M +4 to M +7" while the PLC is running.  ...

  • Mitsubishi Electronics FX3S-MT/ES - page 183

    17 Memory Cassette 177 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instruction List ...

  • Mitsubishi Electronics FX3S-MT/ES - page 184

    17 Memory Cassette 178 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 17.3 Installatio n 17.3 Installation Be sure that the power is OFF when installing the memory cassette. 17.3.1 Installation (when the expansion board/connector conversion adapter is not used together) Installation procedur e 1 Remove the top cover (A ...

  • Mitsubishi Electronics FX3S-MT/ES - page 185

    17 Memory Cassette 179 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instruction List ...

  • Mitsubishi Electronics FX3S-MT/ES - page 186

    17 Memory Cassette 180 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 17.3 Installatio n 6 Fix the memory cassette (F in the right figure) with provided M3 t apping screws (E in the right figure) to the exp ansion board or connector conversion adapter . • Tightening torque: 0.3 to 0.6 N•m Caution • Two types of M3 ...

  • Mitsubishi Electronics FX3S-MT/ES - page 187

    17 Memory Cassette 181 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instruction List ...

  • Mitsubishi Electronics FX3S-MT/ES - page 188

    17 Memory Cassette 182 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 17.4 Removal 17.4.2 Removal (when the expansion board/connector c onversion adapter ar e used together) Removal procedure 1 Raise the memory cassette det achment lever (A in the right figure). 2 Remove the t apping screws (B in the right figure) which ...

  • Mitsubishi Electronics FX3S-MT/ES - page 189

    17 Memory Cassette 183 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instruction List ...

  • Mitsubishi Electronics FX3S-MT/ES - page 190

    17 Memory Cassette 184 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 17.6 PROTECT Switch 17.6 PROTECT Switch 17.6.1 PROTECT switch setting Reading from and writing to memory cassette operations can be performed by using the programming tool. Because sequence programs are written by an electronic format, a special ROM w ...

  • Mitsubishi Electronics FX3S-MT/ES - page 191

    17 Memory Cassette 185 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instruction List ...

  • Mitsubishi Electronics FX3S-MT/ES - page 192

    17 Memory Cassette 186 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 17.8 Memory cass ette precautions for use 17.7.2 Reading (RD: FX 3G -EEPROM-32L <- PLC) Programs are read from the PLC's internal RAM memory to the memory cassette. Required condition: The PLC must be stopp ed, and the PROTECT switch must be O ...

  • Mitsubishi Electronics FX3S-MT/ES - page 193

    Appendix A : Special Device Li st 187 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B I ...

  • Mitsubishi Electronics FX3S-MT/ES - page 194

    Appendix A : Special Device Li st 188 FX 3S Series Programmable Controllers User's Manual - Hardware Edition Appendix A-1 Special Auxiliary Relay (M8 000 to M8511) *1. Cleared when PLC switches from RUN to STOP. *2. Executed at END instruction. *3. Cleared when PLC power supply from OFF to ON. *4. Cleared when PLC switches from STOP to RUN. *5 ...

  • Mitsubishi Electronics FX3S-MT/ES - page 195

    Appendix A : Special Device Li st 189 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B I ...

  • Mitsubishi Electronics FX3S-MT/ES - page 196

    Appendix A : Special Device Li st 190 FX 3S Series Programmable Controllers User's Manual - Hardware Edition Appendix A-1 Special Auxiliary Relay (M8 000 to M8511) *1. Backed up against power interruption, and automatically cleared when M8312 itself is cleared or when the clock data is set again. Number and name Operation and function Correspo ...

  • Mitsubishi Electronics FX3S-MT/ES - page 197

    Appendix A : Special Device Li st 191 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B I ...

  • Mitsubishi Electronics FX3S-MT/ES - page 198

    Appendix A : Special Device Li st 192 FX 3S Series Programmable Controllers User's Manual - Hardware Edition Appendix A-1 Special Auxiliary Relay (M8 000 to M8511) Number and name Operation and function Correspond- ing special device FX 3U -ENET-ADP [ch1] [M]8490 to [M]8 491 Not used - M 8492 IP add ress storag e area write request - [M]8493 I ...

  • Mitsubishi Electronics FX3S-MT/ES - page 199

    Appendix A : Special Device Li st 193 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B I ...

  • Mitsubishi Electronics FX3S-MT/ES - page 200

    Appendix A : Special Device Li st 194 FX 3S Series Programmable Controllers User's Manual - Hardware Edition Appendix A-2 Special Data Register (D8 000 to D8511) *1. Cleared when PLC power supply from OFF to ON. *2. Cleared when PLC switches from STOP to RUN. *3. “4” is displayed even when the memory capacity is set to 16 K steps in the pa ...

  • Mitsubishi Electronics FX3S-MT/ES - page 201

    Appendix A : Special Device Li st 195 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B I ...

  • Mitsubishi Electronics FX3S-MT/ES - page 202

    Appendix A : Special Device Li st 196 FX 3S Series Programmable Controllers User's Manual - Hardware Edition Appendix A-2 Special Data Register (D8 000 to D8511) *1. 1 ms ring counter (D8399, D8398) will operate after M8398 turns ON. *2. Cleared when PLC switches from RUN to STOP. Number and name Content of registe r Correspond- ing special de ...

  • Mitsubishi Electronics FX3S-MT/ES - page 203

    Appendix A : Special Device Li st 197 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B I ...

  • Mitsubishi Electronics FX3S-MT/ES - page 204

    Appendix A : Special Device Li st 198 FX 3S Series Programmable Controllers User's Manual - Hardware Edition Appendix A-3 Analog expansion boards [M8260 to M8269 and D8260 to D8269] Appendix A-3 Analog expansion boards [M 8260 to M8269 and D8260 to D8269] When analog expansion boards are connected, operations and f unctions are assigned to the ...

  • Mitsubishi Electronics FX3S-MT/ES - page 205

    Appendix A : Special Device Li st 199 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B I ...

  • Mitsubishi Electronics FX3S-MT/ES - page 206

    Appendix A : Special Device Li st 200 FX 3S Series Programmable Controllers User's Manual - Hardware Edition Appendix A-4 Analog special adapters [ M8280 to M8289 and D8280 to D8289] Appendix A-4-2 Special data registers (D82 80 to D8289) Number Operation and function FX 3U -4AD-ADP FX 3U -4DA-A DP FX 3U -3A-ADP D 8280 Input data Ch1 Out put d ...

  • Mitsubishi Electronics FX3S-MT/ES - page 207

    Appendix B: In struction Lis t 201 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Inst ...

  • Mitsubishi Electronics FX3S-MT/ES - page 208

    Appendix B: In struction Lis t 202 FX 3S Series Programmable Controllers User's Manual - Hardware Edition Appendi x B-3 Applied Instru ctions ... in Ascending Order of FNC Number Appendix B-3 Applied Instructions .. . in Ascending Order of FNC Number FNC No. Mnemonic Functio n Program Flow 00 CJ Conditional Jump 01 CA LL Call Subrou tine 02 S ...

  • Mitsubishi Electronics FX3S-MT/ES - page 209

    Appendix B: In struction Lis t 203 FX 3S Series Programmable Controllers User's Manual - Hardware Edition 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Inst ...

  • Mitsubishi Electronics FX3S-MT/ES - page 210

    Appendix B: In struction Lis t 204 FX 3S Series Programmable Controllers User's Manual - Hardware Edition Appendi x B-3 Applied Instru ctions ... in Ascending Order of FNC Number MEMO ...

  • Mitsubishi Electronics FX3S-MT/ES - page 211

    205 11 Built-in Analog 12 Output Wiring 13 Wiring for V arious Uses 14 T est Run, Maintenance, T roubleshooting 15 Other Extension Units and Options 16 Display Module (FX 3S -5DM ) 17 Memo ry Cassette A S pecial Devices (M8000-, D8000-) B Instruction List C Discontinued models Appendix C: Di scontinued models FX 3S Series Programmable Controllers U ...

  • Mitsubishi Electronics FX3S-MT/ES - page 212

    206 Appendix C: Di scontinued models FX 3S Series Programmable Controllers User's Manual - Hardware Edition MEMO ...

  • Mitsubishi Electronics FX3S-MT/ES - page 213

    207 Warranty FX 3S Series Programmable Controllers User's Manual - Hardware Edition Warranty Please confirm the following product warranty details before using this product. 1. Gratis Warranty Term and Gratis Warranty Range [Gratis Warranty Term] If any faults or defects (hereinafter "Failure") found to be the responsibility of Mitsu ...

  • Mitsubishi Electronics FX3S-MT/ES - page 214

    208 Revised History FX 3S Series Programmable Controllers User's Manual - Hardware Edition Revised History Date Revision Desc ription 5/2013 A First Edition 9/2013 B • The foll owing products are a dded: - Main unit of the built-in anal og input FX 3S -30MR/ES-2AD, FX 3S -30MT/ES-2 AD, FX 3S -30MT/ES S-2AD - Main unit of DC power supply type ...

  • Mitsubishi Electronics FX3S-MT/ES - page 215

    ...

  • Mitsubishi Electronics FX3S-MT/ES - page 216

    HEAD OFFICE: TOKYO BUILDING, 2 -7-3 MAR UNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN HIMEJI WORKS: 840, CHIYODA MACHI, HIMEJI, JAPAN JY997D48601C (MEE) Effective Oct. 2014 Specifications are subject to change withou t notice. MODEL FX3S-HW-E MODEL CODE 09R535 FX 3S SERIES PROGRAMMABLE CONTROLLERS USER'S MANUAL Hardware Edition ...

Manufacturer Mitsubishi Electronics Category Home Theater Server

Documents that we receive from a manufacturer of a Mitsubishi Electronics FX3S-MT/ES can be divided into several groups. They are, among others:
- Mitsubishi Electronics technical drawings
- FX3S-MT/ES manuals
- Mitsubishi Electronics product data sheets
- information booklets
- or energy labels Mitsubishi Electronics FX3S-MT/ES
All of them are important, but the most important information from the point of view of use of the device are in the user manual Mitsubishi Electronics FX3S-MT/ES.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Mitsubishi Electronics FX3S-MT/ES, service manual, brief instructions and user manuals Mitsubishi Electronics FX3S-MT/ES. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Mitsubishi Electronics FX3S-MT/ES.

Similar manuals

A complete manual for the device Mitsubishi Electronics FX3S-MT/ES, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Mitsubishi Electronics FX3S-MT/ES by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Mitsubishi Electronics FX3S-MT/ES.

A complete Mitsubishi Electronics manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Mitsubishi Electronics FX3S-MT/ES - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Mitsubishi Electronics FX3S-MT/ES, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Mitsubishi Electronics FX3S-MT/ES, that we can find in the current document
3. Tips how to use the basic functions of the device Mitsubishi Electronics FX3S-MT/ES - which should help us in our first steps of using Mitsubishi Electronics FX3S-MT/ES
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Mitsubishi Electronics FX3S-MT/ES
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Mitsubishi Electronics FX3S-MT/ES in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Mitsubishi Electronics FX3S-MT/ES?

Use the form below

If you did not solve your problem by using a manual Mitsubishi Electronics FX3S-MT/ES, ask a question using the form below. If a user had a similar problem with Mitsubishi Electronics FX3S-MT/ES it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)