English dropdown-ico

Manual RHINO F-4243C

112 pages 11.5 mb
Download

Go to site of 112

Summary
  • RHINO F-4243C - page 1

    © 201 1 Alamo Group Inc. $0.00 1625 Published 01/1 1 Part No. F-4243C OPERA T OR’S MANUAL RHINO ® 1020 S. Sangamon A ve. Gibson City , IL 60936 800-446-5158 Email: parts@servis-rhino.com LOADER This Operator' s Manual is an integral p art of th e safe operation of this machine an d must be maint ained with the un it at all times. READ, UND ...

  • RHINO F-4243C - page 2

    T o the Owner/Operator/Dealer All implement s with moving part s are potentially ha zardous . There is no subs titute for a c autious , safe-minded operator who recognizes the potential hazards and follows reason able safety practices. The manufa cturer has designed this implement to be used with all its sa fety equipment proper ly attach ed to min ...

  • RHINO F-4243C - page 3

    T ABLE OF CONTENTS SAFETY SECTION ........ ................................................. .......................................... ............. .1 - 1 General Safety Instructions and Practic es .......... ................ ................ ................ ................ ........... ........ ............... 1-2 Operator Safety I nstructions ...

  • RHINO F-4243C - page 4

    Pre-Operation Inspection and Service ................ ................ ............. ................ ................ ............. ......... ............. 4-12 Tractor Pre-Operation Inspection/Service ........... ................ ................ ................... ................ ........ ........ ............. 4-12 Loader Pre-Operation Inspec ...

  • RHINO F-4243C - page 5

    Safety Section 1-1 SAFETY SECTION ...

  • RHINO F-4243C - page 6

    SAFETY 1625 01/11 Safety Section 1-2 © 201 1 Alamo Group Inc. SAFETY General Safety Instruct ions and Practices A careful operator is the best opera tor . Safety is of primary import ance to the manu facturer and should be to the owner/operator . Most accidents ca n be avoided by being aware of yo ur equipment, your surroun dings, and observing c ...

  • RHINO F-4243C - page 7

    SAFETY 1625 01/11 Safety Section 1 -3 © 201 1 Alamo G roup Inc. SAFETY Never allow children to operate, ri de on, or come close to the T ractor or Implement. Usually , 16-17 year- old children who are ma ture and responsible can operate the implement with adult supervision, if they have read and underst and the Operato r ’s Manuals, been tr aine ...

  • RHINO F-4243C - page 8

    SAFETY 1625 01/11 Safety Section 1-4 © 201 1 Alam o Group Inc. SAFETY Operator Safety Inst ructions and Practices Never operate the T ractor or Implement until you h ave read and completely under stand th is Manual, the T ractor Operator ’s Manual, an d each of the Safety Messages found in the Manual or on the T ractor and Implement. Learn ho w ...

  • RHINO F-4243C - page 9

    SAFETY 1625 01/11 Safety Section 1 -5 © 201 1 Alamo G roup Inc. SAFETY Prolonged oper ation may cause ope rator bor edom and fa tigue affe cting safe operation. T ake scheduled work breaks to help prev ent these p otentially impaire d operating conditions. Never operate the Implement and T ractor in a fatigued or bo red menta l state which impairs ...

  • RHINO F-4243C - page 10

    SAFETY 1625 01/11 Safety Section 1-6 © 201 1 Alam o Group Inc. SAFETY Equipment Operation Safety In structions and Practices This Implemen t may be wider than the T ractor . Be care ful when opera ting or transpor ting this equipment to pr event the Impleme nt from runni ng into or striking sign pos ts, guard rails, concrete abutments o r other so ...

  • RHINO F-4243C - page 11

    SAFETY 1625 01/11 Safety Section 1 -7 © 201 1 Alamo G roup Inc. SAFETY DO NOT operate this Implement o n a T ractor that is not properly maint ained. Should a mechanical or Tractor control failu re occur while operating, immediately shut down the T ractor and perform rep airs before resuming operatio n. Serious injury an d possible death could occ ...

  • RHINO F-4243C - page 12

    SAFETY 1625 01/11 Safety Section 1-8 © 201 1 Alam o Group Inc. SAFETY Do not let the lo ader or att achment cont act electrical power line s. Conta ct with electrical power lines can result in serious injur y or electrocution. If the loader attach ment contact s a power line remain in the tractor seat until the power has been shu t off. S tepping ...

  • RHINO F-4243C - page 13

    SAFETY 1625 01/11 Safety Section 1 -9 © 201 1 Alamo G roup Inc. SAFETY Do not use an attachmen t that is not securely atta ched to the quick hitch, The attachment could fall r esu lting in severe crushing injuries or death to the operat or or bystander s. • Rotate both hitc h pin leve rs down to th e locked pos ition. Y ou sho uld feel a f irm r ...

  • RHINO F-4243C - page 14

    SAFETY 1625 01 /11 Safety Section 1-10 © 201 1 Alam o Group Inc. SAFETY Know before you DIG . Call 88 8-258-0808 and reques t that all buried utilities locations be identified before digging in un familiar ground. Do not let the loader or attachment contact buried electrical power lines, ut ilities or gas lines. Contact wit h electrical power line ...

  • RHINO F-4243C - page 15

    SAFETY 1625 01/11 Safety Section 1-11 © 201 1 Alamo G roup Inc. SAFETY Never leave the Implement a nd Power Unit unattended while the Implement is in the raised position. Accidental opera tion of a lifting lever or a hydrau lic failure may cause the implement to suddenly fa ll causing serious in jury or possible death to anyone who mi ght inadvert ...

  • RHINO F-4243C - page 16

    SAFETY 1625 01 /11 Safety Section 1-12 © 201 1 Alam o Group Inc. SAFETY Connecting or Disconnecting Im plement Safety Instructions and Practices Do not stand or allow byst ander or coworkers between the loader and the tractor while installing or disconnecting the loader from the tractor . Keep hands and body clear of the loader and the loader moun ...

  • RHINO F-4243C - page 17

    SAFETY 1625 01/11 Safety Section 1-13 © 201 1 Alamo G roup Inc. SAFETY T ransporting Safety Instructions and Practices T ransport only at speeds where you can maint ain control of the equipment. Seriou s accident s and injuries ca n result from operating this equipment at high sp eeds. Unders t and the T ractor and Implement and how it handles bef ...

  • RHINO F-4243C - page 18

    SAFETY 1625 01 /11 Safety Section 1-14 © 201 1 Alam o Group Inc. SAFETY Maintenance and Service Saf ety Instructions and Practices Lower the loader to th e bed of the truck or tra iler when transporting the tractor and loader with a truck. Measure to ensure the tr ansport height does not exceed the legal limit s. Contact with overhead obstructions ...

  • RHINO F-4243C - page 19

    SAFETY 1625 01/11 Safety Section 1-15 © 201 1 Alamo G roup Inc. SAFETY Never work under the Imp lement, the framework, or an y lifted compo nent unless the Implement is secure ly supported or blocked up to prevent sudden or inad vertent falling which could caus e serious injury or even death. (SL-36) Do not operate this Equ ipment with hy draulic ...

  • RHINO F-4243C - page 20

    SAFETY 1625 01 /11 Safety Section 1-16 © 201 1 Alam o Group Inc. SAFETY S torage and Parking Safety Instructions and Practices Concluding Safety In structions and Practices Avoid contact with hot su rfaces of the engine or muf fler . Use gloves and eye p rotection when servicing hot component s. Contact with a hot surface or fluid can cause seriou ...

  • RHINO F-4243C - page 21

    SAFETY 1625 01/11 Safety Section 1-17 © 201 1 Alamo G roup Inc. SAFETY Decal Location NOTE: Rhino supplies safety deca ls on this product to promote safe operatio n. Damage to the decals may occur while in shipping, us e, or reconditio ning. Rhino c ares about t he safety of its custom ers, operat ors, and bystanders, and will replace th e safety ...

  • RHINO F-4243C - page 22

    SAFETY 1625 01 /11 Safety Section 1-18 © 201 1 Alam o Group Inc. SAFETY ITEM P ART NO. QTY LEVEL DESCRIPTION 1. D469 1 W AR NING Loader Saf ety 2. D468 2 DANGER Crushing, Electrocution, Falling Hazard 3. D471 1 W ARNING Handling Bales 4. 52740 1 W ARNING Oil Leaks 5. D470 1 DANGER Use ROPS, Seatbelt, Rear Ballast 6. 52203 1 W ARNING Lock V alve in ...

  • RHINO F-4243C - page 23

    SAFETY 1625 01/11 Safety Section 1-19 © 201 1 Alamo G roup Inc. SAFETY Decal Description Loader Safety -Read, understand and follow the operation, warning , and safety instruction s in the Operator ’s Manual. -Equip tractor with ROPS (Ro ll Over Protection System) before installing or operati ng the loader . -Operate Loader only from operator ? ...

  • RHINO F-4243C - page 24

    SAFETY 1625 01 /11 Safety Section 1-20 © 201 1 Alam o Group Inc. SAFETY W A RNING! - DO NOT operate with oil leaks. -Inspect hoses regularly . Failure to inspect and replace worn hoses may allow th em to rupture suddenly and violently , resulting in serious bodily inju ry or death from scalding, fire burn injury , or oil penetration. -Frayed, torn ...

  • RHINO F-4243C - page 25

    SAFETY 1625 01/11 Safety Section 1-21 © 201 1 Alamo G roup Inc. SAFETY P/N 55277 NAME - 1625 Rhino, Le ft P/N 49696 Rhino, Right P/N 51448 Slow Moving V ehicle Decal. Keep SMV reflector clean and visible. DO NOT transport or operate without the SM V . P/N 03200347 ...

  • RHINO F-4243C - page 26

    SAFETY 1625 01 /11 Safety Section 1-22 © 201 1 Alam o Group Inc. SAFETY Read Operato r ’s Manual! The operator’s manual is located inside this canister . If the manual is missing order one fr om your dealer . P/N 00776031 W AR NING! - Crushing Hazard. -T o A v oid Serious Injury or Death Make sure attachment is securely attached to the loader ...

  • RHINO F-4243C - page 27

    SAFETY 1625 01/11 Safety Section 1-23 © 201 1 Alamo G roup Inc. SAFETY Federal Laws and Re gulations This section is intended to explain in broad terms the conc ept and effect of federal laws and regulations concern ing employer and employee eq uipment operators. Thi s section is not intend ed as a legal interpretation of the law and should not be ...

  • RHINO F-4243C - page 28

    ...

  • RHINO F-4243C - page 29

    Introduction Section 2-1 INTRODUCTION SECTION ...

  • RHINO F-4243C - page 30

    INTRODUCTION 1625 01/11 Introduction Section 2-2 © 201 1 Alam o Group Inc. INTRODUCTION The 1625 Loader is designed with care and built wit h quality materials by skilled workers. Proper assembly , maintenance, and ope rating practices, as described in this manual, will help t he owner/operator get years of satisfactory service from the machine. T ...

  • RHINO F-4243C - page 31

    INTRODUCTION 1625 01/11 Introduction Section 2-3 © 201 1 Alamo Group Inc. INTRODUCTION DO NOT use drugs or alc ohol immediately befo re or while operating the T ractor and Implement. Drugs and alcohol w ill affect an operator ’s alertness and coordination and theref ore af fect the operator ’s ability to operate the eq uipment safely . Before ...

  • RHINO F-4243C - page 32

    INTRODUCTION 1625 01/11 Introduction Section 2-4 © 201 1 Alam o Group Inc. INTRODUCTION The RHINO 1625 L oader is designed fo r four-wheel drive tractors. They are intended to lif t only loose materials that will fit in the bucket. All cylinders are double-acti ng. Parking st ands supp ort loader so tractor can be “driven in” for quick attach ...

  • RHINO F-4243C - page 33

    INTRODUCTION 1625 01/11 Introduction Section 2-5 © 201 1 Alamo Group Inc. INTRODUCTION Attention Owner/Operator BEFORE OPERA TING THIS MACHINE: 1. Carefully rea d the Operator ’s Ma nual, complete ly underst and the Safety Messages and instructions, and know how to operate correctly both the tractor and implement. 2. Fill out the W arranty Card ...

  • RHINO F-4243C - page 34

    ...

  • RHINO F-4243C - page 35

    Assembly Section 3-1 ASSEMBL Y SECTION ...

  • RHINO F-4243C - page 36

    ASSEMBLY 1625 01/11 Assembly Section 3-2 © 201 1 Alam o Group Inc. ASSEMBL Y Assembly Instructions T o avoid injury during installation of the load er attachment, do not allo w bystanders with in 10 feet of load er or attachment . Always wear safety glasses when removing or installing buckets. Always use a drif t and hammer made of non-sp arking m ...

  • RHINO F-4243C - page 37

    ASSEMBLY 1625 01/11 Assembly Section 3-3 © 201 1 Alam o Group Inc. ASSEMBL Y Do not use an attachmen t that is not securely atta ched to the quick hitch, The attachment could fall r esu lting in severe crushing injuries or death to the operat or or bystander s. • Rotate both hitc h pin leve rs down to th e locked pos ition. Y ou sho uld feel a f ...

  • RHINO F-4243C - page 38

    ASSEMBLY 1625 01/11 Assembly Section 3-4 © 201 1 Alam o Group Inc. ASSEMBL Y Proper Ballasting and Wheel S p acing S pread front wheels to maximum dis tance - 1280MM (50.4”) on 2WD machines (4WD ma chine is not adjustable). S pread rear wheels to maxim um distance. For better stability , set th e rear tread to 1375MM (54.1”) or wider . Add rea ...

  • RHINO F-4243C - page 39

    ASSEMBLY 1625 01/11 Assembly Section 3-5 © 201 1 Alam o Group Inc. ASSEMBL Y T ractor and Loader General Information Mounting kit can be inst alled using tools ordinarily ava ilable, including a hoist capabl e of lifting and supporting the loader for initial mounting, stand ard and metr ic wrenches, torque wrench, and hydraulic oil. T ractor-suppl ...

  • RHINO F-4243C - page 40

    ASSEMBLY 1625 01/11 Assembly Section 3-6 © 201 1 Alam o Group Inc. ASSEMBL Y Prep aring T ractor 1. Shut of f engine, engage brakes, and re move key during inst allation. If tractor is equipped with front weights, remove weight s and weight bracket. 2. Remove plastic thread pr otectors from holes on left and right sid es of tractor clut ch housing ...

  • RHINO F-4243C - page 41

    ASSEMBLY 1625 01/11 Assembly Section 3-7 © 201 1 Alam o Group Inc. ASSEMBL Y Inst alling Grille Guard (Optional) 1. Position grille guard (4) on front of tractor . 2. Secure with HHCS M14 x 50MM ( 18) and M14 Lockwashers (19). 3. T orque bolts after all have been inst alled using General T orque S pecifications. (See Maintenance Section ). Inst al ...

  • RHINO F-4243C - page 42

    ASSEMBLY 1625 01/11 Assembly Section 3-8 © 201 1 Alam o Group Inc. ASSEMBL Y P ARTS LIST 1 - KUBOT A MOUNTING KIT ITEM P ART NO. DESCRIPTION QTY 1. 55042 WDMT , MID MOUNT RH 1 2. 55043 WDMT , MID MOUNT LH 1 3. 55044 BACK AXLE BAR 2 4. 55045 WDMT , GRILLE GUARD 1 5. 55046 GRILLE GUARD BRACKET 1 6. 55047 PIN 1 7. 55048 SPRING 1 8. 54070 BRACKET - C/ ...

  • RHINO F-4243C - page 43

    ASSEMBLY 1625 01/11 Assembly Section 3-9 © 201 1 Alam o Group Inc. ASSEMBL Y Att aching Hydraulic Block 1. Remove cover fr om tractor hydraulic area located under foot rest on right side of tractor . Align attaching holes in tractor with holes in hydraulic block. Insta ll hydraulic block with O- rings in place using (4) bolt s, lockwashers and O-r ...

  • RHINO F-4243C - page 44

    ASSEMBLY 1625 01/11 Assembly Section 3-10 © 201 1 Alam o Group Inc. ASSEMBL Y Inst alling Manual Canister to Boom Assembly Refer to Figure 2. 1. Use two 1/4” x 1-1/2”, 1 /4” washer s, and 1/4- 20 nuts to attach caniste r to bracket. 2. Remove bolt s (26) and washers (27 & 28) from cover (30). 3. Using bolt s that were just removed, at ta ...

  • RHINO F-4243C - page 45

    ASSEMBLY 1625 01/11 Assembly Section 3-11 © 201 1 Alam o Group Inc. ASSEMBL Y P ARTS LIST - LOADER AND BOOM ITEM P ART NO. DESCRIPTION QTY 1. 55030 BOOM 1 2. 55271 COLUMN-RH 1 3. 55032 COLUMN-LH 1 4. 55033 SP ACER 4 5. 55034 ROD BUCKET 2 6. 55035 LINK BUCKET -RH 1 7. 55036 LINK BUCKET -LH 1 8. 54076 COVER 2 9. 54207 INDICA TOR 1 10. 54219 COVER 1 ...

  • RHINO F-4243C - page 46

    ASSEMBLY 1625 01/11 Assembly Section 3-12 © 201 1 Alam o Group Inc. ASSEMBL Y Mounting Loader to T ractor T o avoid injury during inst allation of quick attach loader , an overhead hoist must be used for initial mounting, do not permit byst anders withi n ten feet of loader . Parking st ands are not operational without bucket or heavy attach ment ...

  • RHINO F-4243C - page 47

    ASSEMBLY 1625 01/11 Assembly Section 3-13 © 201 1 Alam o Group Inc. ASSEMBL Y Att aching Bucket to Loader See Figure 3. T o avoid injury during installation of bucket, do not allow bystan ders within 10 feet of loader and bucket. 1. Locate tractor and bucket on level ground. Lower boom to the ground and exte nd the bucket cylinders slightly while ...

  • RHINO F-4243C - page 48

    ASSEMBLY 1625 01/11 Assembly Section 3-14 © 201 1 Alam o Group Inc. ASSEMBL Y Pre-Operation Check 1. Adjust front wh eel tread setting stops, if necessary , to provide a mini mum 3/4” clearance between front tires and any part of the lo ader with lift cylinders fully oscillated. Be sure lift cylinders are fully retracted. Refer to Prep aring T r ...

  • RHINO F-4243C - page 49

    ASSEMBLY 1625 01/11 Assembly Section 3-15 © 201 1 Alam o Group Inc. ASSEMBL Y Hydraulics ITEM P ART NO. DESCRIPTION QTY 1. 55251 TUBE, HYDRAULIC LINE 1 2. 55252 TUBE, HYDRAULIC LINE 1 3. 55253 TUBE, HYDRAULIC LINE 1 4. 55254 TUBE, HYDRAULIC LINE 1 5. 55255 TUBE, HYDRAULIC LINE 1 6. 55256 ASSY , HYDRAULIC HOSE 1 7. 55257 ASSY , HYDRAULIC HOSE 1 8. ...

  • RHINO F-4243C - page 50

    ASSEMBLY 1625 01/11 Assembly Section 3-16 © 201 1 Alam o Group Inc. ASSEMBL Y 1. BLUE, 3 /8” x 26” (T ilt Cylinder Rod End) 2. RED, 3/8” x 26” (T ilt Cylinder Butt End ) 3. YELLOW , 3/8” x 26” (Lif t Cylinder Rod End) 4. WHITE, 3/ 8” x 26” (L ift Cyli nder Butt End ) A B C D E Figure 4: Hydraulics A, B, C, D , E ...

  • RHINO F-4243C - page 51

    ASSEMBLY 1625 01/11 Assembly Section 3-17 © 201 1 Alam o Group Inc. ASSEMBL Y Connecting Quick Att ach Device (Optional) When Connecting an Att achment to the Loader Quick Hitch 1. Be sure both quick hitch pin levers are in the unlocked position, with the levers pointing up. T ilt the loader quick hitch forwa rd, drive the lo ader into the attach ...

  • RHINO F-4243C - page 52

    ASSEMBLY 1625 01/11 Assembly Section 3-18 © 201 1 Alam o Group Inc. ASSEMBL Y 5. On level groun d, tilt the at tachment down 90 degrees and lower it to the groun d. Lower the loader further to slightly raise t he front of th e tractor of the tractor o ff the ground. Drive the tractor in reverse while the atta chment is on the gr ound for 20 -30 fe ...

  • RHINO F-4243C - page 53

    ASSEMBLY 1625 01/11 Assembly Section 3-19 © 201 1 Alam o Group Inc. ASSEMBL Y 8. Extend lift cylinders 6” to 8” to rotate top of loader upright s forward out of the mount, allowing tractor to be pu shed rearward. Retra ct bucket cylinders until lower loader uprigh t pins clear mount pin sadd les and front tires (See Figure Asm- L-0003). 9. Mov ...

  • RHINO F-4243C - page 54

    ...

  • RHINO F-4243C - page 55

    Operation Section 4-1 OPERA TION SECTION ...

  • RHINO F-4243C - page 56

    OPERATION 1625 01/11 Operation Section 4-2 © 201 1 Alam o Group Inc. OPERA TION RHINO 1625 LOADER OPERA TION INSTRUCTIONS Y our 1625 Load er should now be assembled and insp ected for a ny evidence of defective or damaged pa rts before use. Any evidence of damage sh ould be reported to your dealer imme diately . This section of the Operator ’s M ...

  • RHINO F-4243C - page 57

    OPERATION 1625 01/11 Operation Section 4-3 © 201 1 Alam o Group Inc. OPERA TION 1. S t andard Equipment and Specifications • Model 1625 Load ers are compatible with Kub ota MX5100 T ractors. • Each loader package includes the basic loader , mounting brackets, hydr aulic plumbing, grill guard, quick attach device and bucket. 1625 T ractor MX510 ...

  • RHINO F-4243C - page 58

    OPERATION 1625 01/11 Operation Section 4-4 © 201 1 Alam o Group Inc. OPERA TION 2. Operator Requirement s DO NOT use drugs or alc ohol immediately befo re or while operating the T ractor and Implement. Drugs and alcohol w ill affect an operator ’s alertness and coordination and theref ore af fect the operator ’s ability to operate the eq uipme ...

  • RHINO F-4243C - page 59

    OPERATION 1625 01/11 Operation Section 4-5 © 201 1 Alam o Group Inc. OPERA TION Always read carefully and comply fully with the manufacturer ’ s instructions when handling oil, solvents, cleanser s, and any other chemical agent. (SG-22) Never run the T ractor engine in a closed building or without adequate ventilation. The exhaust fumes can be h ...

  • RHINO F-4243C - page 60

    OPERATION 1625 01/11 Operation Section 4-6 © 201 1 Alam o Group Inc. OPERA TION Repeated or subst antial breathing of hazardous dusts, in cluding crystalline silica, could ca use fatal or serious respiratory disease including silicosis. Concrete, maso nry , many types of rock, and various other materials contain silica sand. Californi a lists resp ...

  • RHINO F-4243C - page 61

    OPERATION 1625 01/11 Operation Section 4-7 © 201 1 Alam o Group Inc. OPERA TION 3. T ractor Requirement s T ractor Requirements and Capabilities • ASABE approved Roll-Over Protective S tru cture (ROP S) or RO PS cab and seat belt • T ractor Safety Devices .... ............. Slow Moving V e hicle (SMV) emblem, lighting • Tractor Ballast ..... ...

  • RHINO F-4243C - page 62

    OPERATION 1625 01/11 Operation Section 4-8 © 201 1 Alam o Group Inc. OPERA TION 3.3 T ractor Ballast Before operating tractor an d loader , add sufficient co unterweight so a minimu m of 25% of the total weight is on the rear axle . T otal weight include s weight of: tractor , loader , rated load i n bucket, and counterweigh t. Rated load is lift ...

  • RHINO F-4243C - page 63

    OPERATION 1625 01/11 Operation Section 4-9 © 201 1 Alam o Group Inc. OPERA TION 4. Getting On an d Off the T ractor 4.1 Boarding the T ractor 4.2 Dismounting the T ractor Do not mou nt or dismount the Tractor while the tractor is moving. Mo unt the T ractor only when the T ractor and all moving parts ar e completelystopped. (SG-12) Before gettin g ...

  • RHINO F-4243C - page 64

    OPERATION 1625 01/11 Ope ration Section 4-10 © 201 1 Alam o Group Inc. OPERA TION 5. St arting the T ractor Before dismoun ting the tractor and loader lowe r the loader to the ground or onto solid support blocks. Engage the loader valve travel lock to prevent inadvertent movemen t of the valve cont rols causing the loader to suddenly move and drop ...

  • RHINO F-4243C - page 65

    OPERATION 1625 01/11 Ope ration Section 4-11 © 201 1 Alam o Group Inc. OPERA TION The operator must h ave a complete underst anding of t he placement, function, and opera tional use of all tractor controls before sta rting the tractor . Review the tracto r operator’s manual and consult an authorized dealer for tractor operation instru ctions if ...

  • RHINO F-4243C - page 66

    OPERATION 1625 01/11 Ope ration Section 4-12 © 201 1 Alam o Group Inc. OPERA TION 6. Pre-Operation Inspection and Service Periodically inspect all moving part s for wear and replace whe n necessary with au thorized service part s. Look for loose fasteners, worn or broken p arts, and leaky or loose fittings. Make sure all pins have cotter pins and ...

  • RHINO F-4243C - page 67

    OPERATION 1625 01/11 Ope ration Section 4-13 © 201 1 Alam o Group Inc. OPERA TION 6.2 Loader Pre-Operation Inspection and Service Before operation, a complete inspection and ser vice is required to ensur e the loader is in a good a nd safe working condition. Damaged and/or broken part s should be repa ired and/or replaced imme diately . T o ensure ...

  • RHINO F-4243C - page 68

    OPERATION 1625 01/11 Ope ration Section 4-14 © 201 1 Alam o Group Inc. OPERA TION The operator’s manual and safety signs af fixed on the unit contain important instru ctions on the saf e and proper use of the equi pment. Maint ain these importan t safety features on the implement in good condition to ensure the information is available to the op ...

  • RHINO F-4243C - page 69

    OPERATION 1625 01/11 Ope ration Section 4-15 © 201 1 Alam o Group Inc. OPERA TION HYDRAULIC LINE INSPECTION • Check for hydraulic le aks along hoses, cylinders and fittings. IMPORT ANT : DO NOT use your hands to check for oil leaks. Use a piece of heavy p aper or cardboard to check for hydraulic oil leaks. • Inspect the condition of the valve ...

  • RHINO F-4243C - page 70

    OPERATION 1625 01/11 Ope ration Section 4-16 © 201 1 Alam o Group Inc. OPERA TION T ractor PRE-OPERA TION Inspection T ractor ID#______________________ Make____________________ Date___________________________ Shift_____________________ Before conducting the inspection, make sur e the tractor engine is off, all rotation has stopped and the tractor ...

  • RHINO F-4243C - page 71

    OPERATION 1625 01/11 Ope ration Section 4-17 © 201 1 Alam o Group Inc. OPERA TION FRONT END LOADER PRE- OPERA TION Inspection Front End Loader ID#_______________Make____________________ Date_____________________________Shift____________________ Before conducting the inspection, make sure the tractor en gine is off, all rotation has stopped and the ...

  • RHINO F-4243C - page 72

    OPERATION 1625 01/11 Ope ration Section 4-18 © 201 1 Alam o Group Inc. OPERA TION 7. Driving the T ractor and Loader This Implemen t may be wider than the T ractor . Be care ful when opera ting or transpor ting this equipment to pr event the Impleme nt from runni ng into or striking sign pos ts, guard rails, concrete abutments o r other solid obje ...

  • RHINO F-4243C - page 73

    OPERATION 1625 01/11 Ope ration Section 4-19 © 201 1 Alam o Group Inc. OPERA TION Safe tractor transport requ ires the operator possess a thorough knowledge o f the model being op erated and precautions to t ake while driving with an attached imp lem ent. Ensure the tractor has the cap acity to handle the weight of the implement and the tracto r o ...

  • RHINO F-4243C - page 74

    OPERATION 1625 01/11 Ope ration Section 4-20 © 201 1 Alam o Group Inc. OPERA TION 7.3 Driving the T ractor and Loader 7.4 Operating the T r actor and Loader Do not attempt to lift loa ds in excess of loader capacity . Operating loader on a hillsid e is dangerous. Extr eme care is recomme nded. Keep bucket as low as possible. S tart of f driving at ...

  • RHINO F-4243C - page 75

    OPERATION 1625 01/11 Ope ration Section 4-21 © 201 1 Alam o Group Inc. OPERA TION The Boom is designed only to position and operat e the Bucket which is attached to it. Never attempt to lift, pull, or push ot her solid object s with the boom or bucket. Serious injury could result from a structural failu re when the Boom is used fo r purposes other ...

  • RHINO F-4243C - page 76

    OPERATION 1625 01/11 Ope ration Section 4-22 © 201 1 Alam o Group Inc. OPERA TION Carry the loader and att achment low when transporting to reduce the potential of the tractor tipping ove r . T ransport on slopes only at slow speeds and use grad ual turning angles. T ractor wheel contact with any wash out, drop o ff or grou nd obstruction with a r ...

  • RHINO F-4243C - page 77

    OPERATION 1625 01/11 Ope ration Section 4-23 © 201 1 Alam o Group Inc. OPERA TION Do not operate the loa der from the ground. Ope rate the tractor and load er only while seated in the tractor seat with the seatbelt fastened. Th e loader could fall crushin g a person resulting in serious injury or death. (SL- 16) Use extreme care when piling materi ...

  • RHINO F-4243C - page 78

    OPERATION 1625 01/11 Ope ration Section 4-24 © 201 1 Alam o Group Inc. OPERA TION Operate the tractor and loader only in conditi ons where you have clea r visibility in daylight or with adequate artificial lig hting. Never oper ate in dar kness or foggy conditions where you cannot clearly see at least 100 feet in fr ont and to the sides of the tra ...

  • RHINO F-4243C - page 79

    OPERATION 1625 01/11 Ope ration Section 4-25 © 201 1 Alam o Group Inc. OPERA TION Always have a heavy attachment, su ch as a bucket mounted on loader when it is re moved from tractor . It is important not to put excessive weight on parking stands with lif t cy linder retraction. Damage may result. 7.5 Operating the Loader The following text and il ...

  • RHINO F-4243C - page 80

    OPERATION 1625 01/11 Ope ration Section 4-26 © 201 1 Alam o Group Inc. OPERA TION Ease lever back toward you to lift an d roll back bucket. Lift and roll back of bucket will increase efficiency because... A level bucket throughout the lif ting cycle resists bucket lift and increa ses breakaway ef f ort. NOTE: Do not be concerned if the bucket is n ...

  • RHINO F-4243C - page 81

    OPERATION 1625 01/11 Ope ration Section 4-27 © 201 1 Alam o Group Inc. OPERA TION LIFTING THE LOAD When lifting th e load, keep the bucket positioned to avoid spillage. Attachment can be adjusted by using bucket cylinders. CARR YING THE LOAD Position bucket below tractor hood for maximum stability and visibility , whet her bucket is loaded or empt ...

  • RHINO F-4243C - page 82

    OPERATION 1625 01/11 Ope ration Section 4-28 © 201 1 Alam o Group Inc. OPERA TION Use extreme care when ope rating loader on a slope, keep bucket as low as possible. This keep s center of gravity low and will provide maximum stability . DUMPING THE BUCKET Lift bucket high enough to clear sid e of vehicle. Move tractor in as close as possible to si ...

  • RHINO F-4243C - page 83

    OPERATION 1625 01/11 Ope ration Section 4-29 © 201 1 Alam o Group Inc. OPERA TION OPERA TING WITH FLOA T CONTROL During hard surf ace operation, keep bucket level and put lift contro l in float position to permit bucket to float on workin g surface. If hy draulic down pressure is exerted on bucket, it will wear faster than normal. Float will also ...

  • RHINO F-4243C - page 84

    OPERATION 1625 01/11 Ope ration Section 4-30 © 201 1 Alam o Group Inc. OPERA TION LOADING FROM A BANK Choose a forward gear that pr ovides sufficient ground speed for loading. Exercise caution when un dercutting high ba nks. Dirt slides can be dangerous. Load fro m as low as possible for maximum efficiency . L oader lift and breakaway capacity dim ...

  • RHINO F-4243C - page 85

    OPERATION 1625 01/11 Ope ration Section 4-31 © 201 1 Alam o Group Inc. OPERA TION Another method for large dirt piles is to build a ramp approach to the pile. It is important to keep the bucket level when approaching a bank or pile. This will help prevent gouging the work ar ea. ...

  • RHINO F-4243C - page 86

    OPERATION 1625 01/11 Ope ration Section 4-32 © 201 1 Alam o Group Inc. OPERA TION PEELING AND SCRAPING Use a slight bucket angle, travel forward and hold lift control forwar d to start th e cut. Make a short angle cut and break out clean ly . With bucket level, st art a cut at notch approximately 2 inches deep. Hold dep th by feathering bucket con ...

  • RHINO F-4243C - page 87

    OPERATION 1625 01/11 Ope ration Section 4-33 © 201 1 Alam o Group Inc. OPERA TION LOADING LOW TRUCKS OR SPREADE RS FROM A PILE For faster load ing, minimize angle of turn and length of run between pile and spreader . Back grade occasionally with a loaded bucket to keep working surface free of rut s and holes. Also, hold lift control forward so ful ...

  • RHINO F-4243C - page 88

    OPERATION 1625 01/11 Ope ration Section 4-34 © 201 1 Alam o Group Inc. OPERA TION BACKFILLING Poor methods actually move no more dirt and make it more diff icult to hold a level grade. Do not use bucket in dumped position for bulldozing. This method , shown above, will impose severe shock loadings on dump linkage, bu cket cylinder and tractor . ...

  • RHINO F-4243C - page 89

    OPERATION 1625 01/11 Ope ration Section 4-35 © 201 1 Alam o Group Inc. OPERA TION Leave dirt in bucket. Dumping o n each pass wastes time. Operate tractor at righ t angles to ditch. T ake as big a bite as tractor can ha ndle without lugging down. ...

  • RHINO F-4243C - page 90

    OPERATION 1625 01/11 Ope ration Section 4-36 © 201 1 Alam o Group Inc. OPERA TION Leave dirt which drif ts over side of bucket for final cleanup. Pile dirt on high side for easier backfilling on a slope. HANDLING LARGE HEA VY OBJE CTS 1. Using front end load ers for handling la rge heavy objects such as larg e round or rectangular ba les, logs and ...

  • RHINO F-4243C - page 91

    OPERATION 1625 01/11 Ope ration Section 4-37 © 201 1 Alam o Group Inc. OPERA TION 7.6 Operating Bale Spear Operate the bale spear using extreme caution. Sharp point s on bale spear can cause serious injur y or death. Because of size and we ight of large bales, e xtreme care must be t aken in handling them. Be aware of forces actin g on stacked bal ...

  • RHINO F-4243C - page 92

    OPERATION 1625 01/11 Ope ration Section 4-38 © 201 1 Alam o Group Inc. OPERA TION Carry bales as low to th e ground as possible to allow maximum visibility and avoid tipping. 8. Loader Storage Always have a heavy att achment, such as a bu cket mounted on loader when it is removed from tractor . It is importan t not to put excessive weig ht on park ...

  • RHINO F-4243C - page 93

    OPERATION 1625 01/11 Ope ration Section 4-39 © 201 1 Alam o Group Inc. OPERA TION 9. T ransporting the T ractor and Implement Never allow children or other persons to ride on the T ractor or Implement. Falling off can result in serious injury or death. (SG-1 0) T ransport only at speeds where you can maint ain control of the equipment. Seriou s ac ...

  • RHINO F-4243C - page 94

    OPERATION 1625 01/11 Ope ration Section 4-40 © 201 1 Alam o Group Inc. OPERA TION T ransporting on Public Roadways Lower the loader to th e bed of the truck or tra iler when transporting the tractor and loader with a truck. Measure to ensure the tr ansport height does not exceed the legal limit s. Contact with overhead obstructions or power lines ...

  • RHINO F-4243C - page 95

    OPERATION 1625 01/11 Ope ration Section 4-41 © 201 1 Alam o Group Inc. OPERA TION Make cert ain that the “Slow Moving V ehicle” (SMV) sign is inst alled in such a wa y as to be clearly vis ible and leg ible. When transport ing the Equipment use the T ractor flashing warning light s and follow all local traf fic regulations. (S G-6 ) Extreme ca ...

  • RHINO F-4243C - page 96

    OPERATION 1625 01/11 Ope ration Section 4-42 © 201 1 Alam o Group Inc. OPERA TION 9.1 Hauling the T ractor and Implement Before transporting a loade d tractor and imple ment, measure the height and width dimensions and gross weight of the complete loaded unit. Ensure that the load will be in compliance wit h the legal limits set for the areas that ...

  • RHINO F-4243C - page 97

    OPERATION 1625 01/11 Ope ration Section 4-43 © 201 1 Alam o Group Inc. OPERA TION 10. T roubleshooting Guide TROUBLE POSSIBLE CAUSE POSSIBLE REMEDY Loader slow or will not lif t Hydraulic oil too heav y . Change to proper oil. and/or dump Oil filter plugged. Clean or replace filter . Hydraulic pump worn. Repai r or replace pump. Oil line restricte ...

  • RHINO F-4243C - page 98

    ...

  • RHINO F-4243C - page 99

    Maintenanc e Section 5-1 MAINTENANCE SECTION ...

  • RHINO F-4243C - page 100

    MAINTENANCE 1625 01 /11 Mainten ance Section 5-2 © 201 1 Alam o Group Inc. MAINTENANCE READ, UNDERST AND, and FOLLOW the following Safety Messag es. Serious injury or death may occur unless care is t aken to follow the warnings and instructions st ated in the Safety Messages. Always use good common sense to avoid hazards. (SG-2) Never interfere wi ...

  • RHINO F-4243C - page 101

    MAINTENANCE 1625 01 /11 Mainten ance Section 5-3 © 201 1 Alam o Group Inc. MAINTENANCE NEVER perform maintenance benea th a raised loader unless lo ader is properly supported to prevent accident al lowering. Do Not fill fuel tank while engine is running. Refuel only after engi ne has cooled down. If fuel is spilled, move machine away from the area ...

  • RHINO F-4243C - page 102

    MAINTENANCE 1625 01 /11 Mainten ance Section 5-4 © 201 1 Alam o Group Inc. MAINTENANCE Lubrication Schedule Before operating your Loader , take the time to inspect a nd re pair any damag e to the machine or tractor . Only a minimum of time and ef fort is required to regularly main tain this machine to pr ovide long life and trouble fre e operation ...

  • RHINO F-4243C - page 103

    MAINTENANCE 1625 01 /11 Mainten ance Section 5-5 © 201 1 Alam o Group Inc. MAINTENANCE Daily Maintenance Regular maintenance of your loader and hydraulic system will insure maximum load er efficiency and long life. 1. Check fluid level of tractor hydr aulic system befo re starting each day’s operation. If nece ssary , add hydraulic oil as recomm ...

  • RHINO F-4243C - page 104

    MAINTENANCE 1625 01 /11 Mainten ance Section 5-6 © 201 1 Alam o Group Inc. MAINTENANCE St o r a ge NOTE: When loader hydraulics are di sconnected from tractor , the tractor hydraulic circuit must be completed. Failure to do so will result in tractor hy draulic pump damage. 1. S tore loader with attachment securely attached. 2. Place dust caps on h ...

  • RHINO F-4243C - page 105

    MAINTENANCE 1625 01 /11 Mainten ance Section 5-7 © 201 1 Alam o Group Inc. MAINTENANCE 3. Do not remove att achment from stored loader . 4. Do not allow children to play on or around loader . ...

  • RHINO F-4243C - page 106

    MAINTENANCE 1625 01 /11 Mainten ance Section 5-8 © 201 1 Alam o Group Inc. MAINTENANCE Proper T orque for Fasteners The chart lists the corre ct tightening torque for fa stener s. When bolt s are to be tightened or replace d, refer to this chart to determine the grade o f bolts and the prop e r torque except when specific torque values ar e assign ...

  • RHINO F-4243C - page 107

    MAINTENANCE 1625 01 /11 Mainten ance Section 5-9 © 201 1 Alam o Group Inc. MAINTENANCE ...

  • RHINO F-4243C - page 108

    MAINTENANCE 1625 01/11 Maintenance Section 5-10 © 201 1 Alam o Group Inc. MAINTENANCE ...

  • RHINO F-4243C - page 109

    ...

  • RHINO F-4243C - page 110

    RHINO LIMITED W ARRANTY 1. LIMITED W ARRANTIES 1.01. Rhino warrants for one year from the purchase date to the original non-commercial, governmental, or municipal purchaser (“Purchaser”) and warrants for six months to the original co mmercial or industrial purchaser (“Purchaser”) that the goods purchased are free from defects in material or ...

  • RHINO F-4243C - page 111

    T O THE OWNER/OPERA T OR/DEALER T o keep your implement running ef ficiently and safely , read your manual thor oughly and follow these dire ctions and the Safety Messages in this Manual. T he T able of Contents clearly ident ifies each sect ion where you ca n easily find the informa tion you need. The OCCUP A TIONAL SAFETY AND HEAL TH ACT (1928.5 ...

  • RHINO F-4243C - page 112

    1625 -SOM-1/1 1 P/N F-4243C Printed U.S.A 1625 LOADER ...

Manufacturer RHINO Category Compact Loader

Documents that we receive from a manufacturer of a RHINO F-4243C can be divided into several groups. They are, among others:
- RHINO technical drawings
- F-4243C manuals
- RHINO product data sheets
- information booklets
- or energy labels RHINO F-4243C
All of them are important, but the most important information from the point of view of use of the device are in the user manual RHINO F-4243C.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals RHINO F-4243C, service manual, brief instructions and user manuals RHINO F-4243C. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product RHINO F-4243C.

Similar manuals

A complete manual for the device RHINO F-4243C, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use RHINO F-4243C by users. Manuals are usually written by a technical writer, but in a language understandable to all users of RHINO F-4243C.

A complete RHINO manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual RHINO F-4243C - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the RHINO F-4243C, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the RHINO F-4243C, that we can find in the current document
3. Tips how to use the basic functions of the device RHINO F-4243C - which should help us in our first steps of using RHINO F-4243C
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with RHINO F-4243C
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of RHINO F-4243C in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning RHINO F-4243C?

Use the form below

If you did not solve your problem by using a manual RHINO F-4243C, ask a question using the form below. If a user had a similar problem with RHINO F-4243C it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)