English dropdown-ico

Manual D-Link DAP-1150

77 pages Not applicable
Download

Go to site of 77

Summary
  • D-Link DAP-1150 - page 1

    ...

  • D-Link DAP-1150 - page 2

    2 D-Link DAP-1150 User Manual Table of Contents Product Overview ........................................................ 4 Package Contents ................................................... 4 System Requirements ............................................. 4 Introduction .............................................................. 5 Features ...

  • D-Link DAP-1150 - page 3

    3 D-Link DAP-1150 User Manual Table of Contents Connect to a Wireless Network Using Windows ® XP .......... 57 Congure WEP/WPA-PSK ............................................... 5 9 Using Windows ® Vista (Secured Network) ....................60 Using Windows ® Vista (Unsecured Network) ........ 63 Troubleshooting ............................ ...

  • D-Link DAP-1150 - page 4

    4 D-Link DAP-1150 User Manual Section 1 - Product Overview • D-Link DAP-1150 Wireless G Access Point • Power Supply • Manual on CD • Quick Installation Guide • Ethernet Cable System Requirements • Compu ters with Windo ws ® , Macintosh ® , or Linu x-bas ed operat ing system s with an insta lled Ether net Adapter • Internet Explorer ...

  • D-Link DAP-1150 - page 5

    5 D-Link DAP-1150 User Manual Section 1 - Product Overview Introduction D-Link, an industry leader in networking, introduces the new D-Link Wireless G Access Point(DAP-1150). With the ability to transfer les with a maximum wireless signal rate of up to 54Mbps 1 , the DAP-1150 gives you high-speed wireless network access for your home or ofce. ...

  • D-Link DAP-1150 - page 6

    6 D-Link DAP-1150 User Manual Section 1 - Product Overview • Multiple operation modes – Can be exibly congured to operate as an Access Point, Wireless Client, Wireless Repeater mode. • Total security – Complete set of security features including WEP encryption and WPA/WPA2 to protect network against outside intruders. • Supports WPS ...

  • D-Link DAP-1150 - page 7

    7 D-Link DAP-1150 User Manual Section 1 - Product Overview Hardware Overview Connections Power: Receptor for the Power Adapter. LAN Port: C o n n e c t e t h e r n e t d e v i c e s u c h a s c o m p u t e r , s w i t c h and hub. RESET: Pre ssi ng the Reset Butto n res tor es t h e a c c e s s p o i n t t o i t s o r i g i n a l factory default se ...

  • D-Link DAP-1150 - page 8

    8 D-Link DAP-1150 User Manual Section 1 - Product Overview Hardware Overview LEDs Power: Solid gree n light ind icat es conn ect ion to a power source WLAN: B l i n k i n g g r e e n l i g h t ind icat es wirel ess acti vity ;sol id green light indicates connection L A N : B l i n k i n g g r e e n l i g h t indicates activity;Solid green light ind ...

  • D-Link DAP-1150 - page 9

    9 D-Link DAP-1150 User Manual The D-Link wireless access point lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind, however, that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limi ...

  • D-Link DAP-1150 - page 10

    10 D-Link DAP-1150 User Manual How you use your DAP-1150 will determine which mode you choose on the DAP-1150. This section will help you gure out which setting works with your setup. AP/Repeater/Wireless Client Mode Access Point Mode In Access Point mode, the DAP-1150 acts as a central connection point for any computer (client) that has a 802.1 ...

  • D-Link DAP-1150 - page 11

    11 D-Link DAP-1150 User Manual Wireless Client Mode In AP Client mode, the DAP-1150 acts as a wireless network adapter for your Ethernet-enabled device (such as a game console or a TV set-top box). Connect your Ethernet-enabled device to the AP using an Ethernet cable. AP Client mode can support multiple wired clients. Ethernet-enabled Gaming Conso ...

  • D-Link DAP-1150 - page 12

    12 D-Link DAP-1150 User Manual Appendix A - Wireless Modes Repeater Mode Repeater mode increases the range of your wireless network by extending the wireless coverage of another AP or wireless router. The APs and wireless router (if used) must be within range of each other. Make sure that all clients, APs, and the wireless router all use the same S ...

  • D-Link DAP-1150 - page 13

    13 D-Link DAP-1150 User Manual Section 3 - Conguration Conguration Web-based Conguration Utility 1. Open the web browser 2. Type in the device name of the DAP-1150.(dlinkap) If you wish to change the default settings or optimize the performance of the DAP-1150 , you may use the configuration utility that D-Link has included a configuration ...

  • D-Link DAP-1150 - page 14

    14 D-Link DAP-1150 User Manual Section 3 - Conguration Click Launch Wireless Setup Wizard t o q u i c k l y congure your access point. To setup your wireless network using WPS, you can click Add Wireless Device With WPS and skip to pag e 37 . Wireless Setup Wizard ...

  • D-Link DAP-1150 - page 15

    15 D-Link DAP-1150 User Manual Section 3 - Conguration This Wizard is designed to assist you in connecting you wireless device to your access point. It will guide you through step-by-step instructions on how to get your wireless device connected. Wireless Setup Wizard For AP Mode Enter the Device Name of the AP and click Next to co nt in ue . I ...

  • D-Link DAP-1150 - page 16

    16 D-Link DAP-1150 User Manual Section 3 - Conguration Click Save to save your network settings. Select Auto as the conguration method only if your wireless device supports Wi-Fi Protected Setup. Skip to next page for Manual conguration. Click Next to continue. If you want to change the admin account password, enter a new password and clic ...

  • D-Link DAP-1150 - page 17

    17 D-Link DAP-1150 User Manual Section 3 - Conguration Select Manual as the conguration method to setup your network manually. Click Next to continue. In order for your network settings to take effect AP will reboot automatically. Click continue to return to the login page. ...

  • D-Link DAP-1150 - page 18

    18 D-Link DAP-1150 User Manual Section 3 - Conguration I f y o u c h o o s e WP A - P S K en c r y p t i o n, t h e f o ll o w i n g screen will show you your Network Key to enter on your wireless clients. Click Save to nish the Setup Wizard. Ent er a netw ork name and choo se Aut oma tic all y assi gn a network key. To Manually assign a netw ...

  • D-Link DAP-1150 - page 19

    19 D-Link DAP-1150 User Manual Section 3 - Conguration Choose Manually assign a network key to create you own key. Click Next to continue. If you choose WEP encryptio n, the following screen will show you your Network Key to enter on your wireless clients. Click Save to nish the Setup Wizard. ...

  • D-Link DAP-1150 - page 20

    20 D-Link DAP-1150 User Manual Section 3 - Conguration If you select WPA encryption, the following screen will show you your network key to enter on your wireless clients. Click Save to nish the Setup Wizard. For WPA encryption, enter a Network Key between 8 and 63 characters long or enter exactly 64 characters using 0-9 and A-F. Click Next t ...

  • D-Link DAP-1150 - page 21

    21 D-Link DAP-1150 User Manual Section 3 - Conguration If you select WEP encryption, the following screen will show you your network key to enter on your wireless clients. Click Save to nish the Setup Wizard. For WEP encryption, enter a Network Key exactly 5 or 13 characters long or exactly 10 or 26 characters using 0-9 and A-F. Click Next to ...

  • D-Link DAP-1150 - page 22

    22 D-Link DAP-1150 User Manual Section 3 - Conguration Th is wi za rd i s de sig ne d to a ssi st y ou i n con g ur in g the w ir el ess s et ti ngs f or y ou r DA P-1 15 0 wi th re pe at er mo de . It wi ll gui de yo u t hro ug h s tep -b y-s te p i nst ru cti on s o n h ow to se tup yo ur wi rel es s n etw or k. Yo u c an cl ick la un ch wi ...

  • D-Link DAP-1150 - page 23

    23 D-Link DAP-1150 User Manual Section 3 - Conguration Select Auto c o nf ig u ra ti o n if y o u w an t t o us e W i- Fi Pr ot ec te d Se tu p. If you want to setup your network manually, skip to page 26. Click Next to continue. If you want to change the admin account password, enter a new password and click Next . ...

  • D-Link DAP-1150 - page 24

    24 D-Link DAP-1150 User Manual Section 3 - Conguration Start WPS on the wireless dev ice you are addi ng to you wireless network to complete the setup. Select PIN t o co nn ec t yo ur w ir el es s de vi ce w it h WP S. For PBC conguration, skip to next page. En te r t he PI N n um be r u se d i nt o y ou ac ce ss po in t and click Connect . ...

  • D-Link DAP-1150 - page 25

    25 D-Link DAP-1150 User Manual Section 3 - Conguration Press down the Push Button on the wire less devic e you are adding to your network to complete the setup. Select PBC to use the Push Button Conguration to connect to your network. Click Connect to continue. ...

  • D-Link DAP-1150 - page 26

    26 D-Link DAP-1150 User Manual Section 3 - Conguration Select Manual c on g u ra ti on to s et u p yo ur ne tw or k manually. Click Next to continue. If you clicked on Site Survey to following screen will be displayed. Find your access point from the list and click Connect to complete the Setup Wizard. ...

  • D-Link DAP-1150 - page 27

    27 D-Link DAP-1150 User Manual Section 3 - Conguration If you choose WEP , e nt er the w ir ele ss sec u r it y pa ssw ord and click Next to complete the Setup Wizard. Choose which Security Mode you want to use and click Next to continue. ...

  • D-Link DAP-1150 - page 28

    28 D-Link DAP-1150 User Manual Section 3 - Conguration The Wireless Setup Wizard is complete. Click Finish to reboot the device. If you choose WPA2 , e nt er th e W PA 2 Per so na l P as sp hra se a nd click Next to complete the Setup Wizard. If you choose WPA , enter the WPA Personal Passphrase and click Next to complete the Setup Wizard. ...

  • D-Link DAP-1150 - page 29

    29 D-Link DAP-1150 User Manual Section 3 - Conguration This wizard is designed to assist you in conguring the wireless settings for your AP with wireless client mode. It wi ll gu id e you t hr oug h st ep- by -s te p i ns tr uct io ns on h ow t o s et up yo ur w ire le ss n etw or k. Click Launch Wireless Setup Wizard to begin. Click Launch W ...

  • D-Link DAP-1150 - page 30

    30 D-Link DAP-1150 User Manual Section 3 - Conguration S el e c t A u t o c o n fi g u r at i o n i f y ou w a nt t o u s e W i - Fi Pr ot ec te d Se tu p. If you want to setup your network manually, skip to page 33. Cl ic k Ne xt t o co nt in ue . If you want to change the admin account password, enter a new password and click Next. ...

  • D-Link DAP-1150 - page 31

    31 D-Link DAP-1150 User Manual Section 3 - Conguration Start WPS on the wireless dev ice you are addi ng to you wireless network to complete the setup. Select PIN to connect your wireless device with WPS. For PBC conguration, skip to next page. En te r t he PI N n um be r u se d i nt o y ou ac ce ss po in t and click Connect. ...

  • D-Link DAP-1150 - page 32

    32 D-Link DAP-1150 User Manual Section 3 - Conguration Press down the Push Button on the wire less devic e you are adding to your network to complete the setup. Select PBC to use the Push Button Conguration to connect to your network. Click Connect to continue. ...

  • D-Link DAP-1150 - page 33

    33 D-Link DAP-1150 User Manual Section 3 - Conguration Enter the Wireless Network Name of the AP or use site survey to nd the AP. Click Next to continue. Se l e ct M an u al c on  g ur a ti o n t o s e t up yo u r n e tw o r k manually. Click Next to continue. ...

  • D-Link DAP-1150 - page 34

    34 D-Link DAP-1150 User Manual Section 3 - Conguration If you clicked on Site Survey to following screen will be displayed. Fi nd yo ur acce ss poin t fr om th e lis t and clic k Co nn ec t to complete the Setup Wizard. ...

  • D-Link DAP-1150 - page 35

    35 D-Link DAP-1150 User Manual Section 3 - Conguration If y ou c ho ose W EP , en t er the w ir ele ss sec uri t y pas swo rd and click Next to complete the Setup Wizard. Choose which Security Mode you want to use and click Next to continue. ...

  • D-Link DAP-1150 - page 36

    36 D-Link DAP-1150 User Manual Section 3 - Conguration The Wireless Setup Wizard is complete. Click Finish to reboot the device. If you choose WPA2, enter the WPA2 Personal Passphrase and click Next to complete the Setup Wizard. If you choose WPA, enter the WPA Personal Passphrase and click Next to complete the Setup Wizard. ...

  • D-Link DAP-1150 - page 37

    37 D-Link DAP-1150 User Manual Section 3 - Conguration This Wizard is designed to assist you in your wireless network setup. It will guide you through step-by-step instructions on how to set up your wireless network and how to make it secure. Select PIN to use your PIN number from your wireless device to connect to your network. For PBC congu ...

  • D-Link DAP-1150 - page 38

    38 D-Link DAP-1150 User Manual Section 3 - Conguration Press down the Push Button on the wire less devic e you are adding to your network to complete the setup. Select PBC to use the Push Button Conguration to connect to your network. Click Connect to continue. ...

  • D-Link DAP-1150 - page 39

    39 D-Link DAP-1150 User Manual Section 3 - Conguration Access Point Wireless Network Name (also called the SSID): The Wireless Network Name is a unique name th at id en ti e s a netw or k. All dev ic es on a ne tw or k must share t he same wirele ss network name in order to communicate on the network. If you decide to chan ge the w ireless ne ...

  • D-Link DAP-1150 - page 40

    40 D-Link DAP-1150 User Manual Section 3 - Conguration Enable or disable the Wi-Fi protected setup feature. Locking the wireless security prevents the settings from being changed by any new external registar using its PIN. Devices can still be added to the wireless network using Wi-Fi Protected Setup. It is still possible to change wireless netw ...

  • D-Link DAP-1150 - page 41

    41 D-Link DAP-1150 User Manual Section 3 - Conguration Repeater Wireless repeater mode extends the wireless coverage of another wireless AP or wireless router. The Wireless Netwo rk Nam e is a unique nam e t ha t i d en t i  es a n et w o r k . A l l d e v i c es o n a net wo rk mu st sha re the sa me wir ele ss ne tw ork name in order to com ...

  • D-Link DAP-1150 - page 42

    42 D-Link DAP-1150 User Manual Section 3 - Conguration Y o u c a n i n p u t t h e w i r e l e ss n e t wo r k name of the root AP or click the Site Survey button to nd the root AP. Click this button to choose the root AP from an available connection list. Wireless Client Wireless Network Name (also called the SSID): Site Survey: Wireless Cha ...

  • D-Link DAP-1150 - page 43

    43 D-Link DAP-1150 User Manual Section 3 - Conguration LAN Setup The LAN (Local Area Network) is your private, internal network. This page allows you to congure the IP settings of the LAN interface for the DAP-1150. The IP address can be changed to your current network IP range. This IP address cannot be seen from the Internet. ...

  • D-Link DAP-1150 - page 44

    44 D-Link DAP-1150 User Manual Section 3 - Conguration The DAP-1150 is set to Dynamic IP by default. . The IP address and subnet mask will fallback t o 1 9 2 . 16 8 . 0 .5 0 a n d 2 5 5 . 2 55 . 2 5 5. 0 , i f d o n ’ t get IP address from DHCP server exceed 30 seconds. Select this option if you are manually assigning an IP Address. LAN Settin ...

  • D-Link DAP-1150 - page 45

    45 D-Link DAP-1150 User Manual Section 3 - Conguration Advanced Wireless Select the transmission rate for the network. Choose 100% , 50% (-3dB), 25% (-6dB), or 12.5% (-9dB). This value should remain at its default setting of 2,346. If you experience a high packet error rate, you may slightly decrease your fragmentation threshold within the value ...

  • D-Link DAP-1150 - page 46

    46 D-Link DAP-1150 User Manual Section 3 - Conguration MAC Filter List: This list will display the MAC addresses that are in the selected lter. Access Control Use MAC Filters to allow or deny wireless clients, by their MAC addresses, from accessing the DAP-1150. You can manually add a MAC address or select the MAC address from the list of cli ...

  • D-Link DAP-1150 - page 47

    47 D-Link DAP-1150 User Manual Section 3 - Conguration Maintenance Device Administration Enter a new password. Re-enter the password to conrm it. New Password: Conrm Password: Save and Restore Click Save to sa ve the curre nt sys tem se t ti ng s a s a  le o n to y ou r l oc a l ha r d drive. Save Settings To Local Hard Drive: Load Sett ...

  • D-Link DAP-1150 - page 48

    48 D-Link DAP-1150 User Manual Section 3 - Conguration Firmware Update This feature is used to update the rmware of the DAP-1150. The current rmware version and rmware date are displayed here. Cli ck this link and you wil l be con nec ted to D-Link’s support website where you can download the latest rmware version to your local har ...

  • D-Link DAP-1150 - page 49

    49 D-Link DAP-1150 User Manual Section 3 - Conguration This screen displays the current rmware version and the current LAN, and Wireless LAN settings on your access point. Status Device Info ...

  • D-Link DAP-1150 - page 50

    50 D-Link DAP-1150 User Manual Section 3 - Conguration Log The DAP-1150 keeps a running log of events and activities occurring on the AP. If the AP is rebooted, the logs are automatically cleared. You can save the log les under Log Setting. This button directs you to the rst page of the log. This button directs you to the last page of the ...

  • D-Link DAP-1150 - page 51

    51 D-Link DAP-1150 User Manual Section 3 - Conguration Statistics The DAP-1150 keeps statistics of the trafc that passes through it. You can view the amount of packets that pass through the LAN and wireless portions of the network. The trafc counter will reset if the access point is rebooted. Wireless This list disp lays the M AC ad dress ...

  • D-Link DAP-1150 - page 52

    52 D-Link DAP-1150 User Manual Section 3 - Conguration Help The Help menu contains an index of links to help topics for each feature of the DAP-1150. ...

  • D-Link DAP-1150 - page 53

    53 D-Link DAP-1150 User Manual Section 4 - Security Wireless Security This section will show you the different levels of security you can use to protect your data from intruders. The DAP-1150 offers the following types of security: • WPA-Personal (Pre-Shared Key) • WPA-Enterprise (Extensible Authentication Protocol) • WPA2-Personal (Pre-Share ...

  • D-Link DAP-1150 - page 54

    54 D-Link DAP-1150 User Manual Section 4 - Security Congure WEP It is recommended to enable encryption on your wireless access point before your wireless network adapters. Please establish wireless connect ivity before enabli ng encryption. Your wireless signal may degrade when enabling encrypt ion due to the added overhead. 1. Lo g i n t o t h ...

  • D-Link DAP-1150 - page 55

    55 D-Link DAP-1150 User Manual Section 4 - Security What is WPA? WPA, or Wi-Fi Protected Access, is a Wi-Fi standard that was designed to improve the security features of WEP (Wired Equivalent Privacy). There are 2 major improvements over WEP: • Improved data encryption through the Temporal Key Integrity Protocol (TKIP). TKIP scrambles the keys u ...

  • D-Link DAP-1150 - page 56

    56 D-Link DAP-1150 User Manual Section 4 - Security Congure WPA-PSK, WPA2-PSK, and WPA2-Auto-PSK (Personal) It is recommended to enable encryption on your wireless access point before your wireless network adapters. Please establish wireless connecti vity before enabling encrypti on. Your wireless signal may degrade when enabling encryption due ...

  • D-Link DAP-1150 - page 57

    57 D-Link DAP-1150 User Manual Section 4 - Security It is recommended to enable encryption on your wireless access point before your wireless network adapters. Please establish wireless connect ivity before enabli ng encryption. Your wireless signal may degrade when enabling encrypt ion due to the added overhead. 1. Log into the web-based congur ...

  • D-Link DAP-1150 - page 58

    58 D-Link DAP-1150 User Manual Section 5 - Connecting to a Wireless Network Connect to a Wireless Network Using Windows ® XP Windows ® XP users can use the built-in wireless utility (Zero Conguration Utility) to connect to a wireless network. The following instructions are for Service Pack 2 users. If you are using another company’s utility ...

  • D-Link DAP-1150 - page 59

    59 D-Link DAP-1150 User Manual Section 5 - Connecting to a Wireless Network Congure WEP/WPA-PSK It is recomme nded to enabl e WEP or WPA-PSK on your wireless access point before conguring your wireless adapt er. If you are joining an existing network, you will need to know the WEP or WPA-PSK key being used. Fol low the step s on the pre vi ou ...

  • D-Link DAP-1150 - page 60

    60 D-Link DAP-1150 User Manual Section 5 - Connecting to a Wireless Network Using Windows ® Vista (Secured Network) The following are step-by-step directions to connect to a secured wireless network using Windows ® Vista. 2. Click the Manage network connections link in the Ne tw ork and Sharing Center window. 1. Right-click on Network and click o ...

  • D-Link DAP-1150 - page 61

    61 D-Link DAP-1150 User Manual Section 5 - Connecting to a Wireless Network 4. Select a network to connect to in the Select a network to connect to window and then click the Connect button. 5. The following window displays connection progress. 3. Right-click the Wireless Network Connection entry and then select Connect/Disconnect from the drop-down ...

  • D-Link DAP-1150 - page 62

    62 D-Link DAP-1150 User Manual Section 5 - Connecting to a Wireless Network 7. The following Successfully connected to [SSID name] window is displayed. Choose to save this network and/or start this new connection automatically. When you are nished, click the Close button. 6. E n te r th e ne two rk sec uri ty key or pas sph ras e fo r th e AP in ...

  • D-Link DAP-1150 - page 63

    63 D-Link DAP-1150 User Manual Section 5 - Connecting to a Wireless Network Using Windows ® Vista (Unsecured Network) The following are step-by-step directions to set up a wireless connection on an unsecured network using Windows ® Vista. 2. Go to the Network and Sharing Center window and click the Manage Network Connections link. 1. Right-click ...

  • D-Link DAP-1150 - page 64

    64 D-Link DAP-1150 User Manual Section 5 - Connecting to a Wireless Network 3. Right-click the Wireless Network Connection ent ry and the n se le ct Connect/Disconnect from the drop-down menu. 4. Select a network to connect to in the Select a network to connect to window and then click the Connect button. 5. Conrm that you still want to connect ...

  • D-Link DAP-1150 - page 65

    65 D-Link DAP-1150 User Manual Section 5 - Connecting to a Wireless Network 6. The following Connect to a network wizard window displays the connection progress. 7. The following Successfully connected to [SSID name] window is d ispla yed. Choo se to save this net work and/ or st art t his n ew connection automatically. When you are nished, clic ...

  • D-Link DAP-1150 - page 66

    66 D-Link DAP-1150 User Manual Section 6 - Troubleshooting Troubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the DAP-1150. Read the following descriptions if you are having problems. The examples below use Windows ® XP. If you have a different operating system, the troubleshooting s ...

  • D-Link DAP-1150 - page 67

    67 D-Link DAP-1150 User Manual Section 6 - Troubleshooting • Congure your Internet settings: • Go to Start > Settings > Control Panel . Double-click the Internet Options Icon. From the Security tab, click the button to restore the settings to their defaults. • Click the Connection tab and set the dial-up option to Never Dial a Connec ...

  • D-Link DAP-1150 - page 68

    68 D-Link DAP-1150 User Manual Appendix B - Wireless Basics D-Link wireless products are based on the latest industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business, or public wireless networks. Strictly adhering to IEEE standards, the D-Link wireless family of products allows you to secu ...

  • D-Link DAP-1150 - page 69

    69 D-Link DAP-1150 User Manual Appendix B - Wireless Basics What is Wireless? Wireless or Wi-Fi technology is another way of connecting your computer to the network without using wires. Wi-Fi uses radio waves to connect wirelessly, so you have the freedom to connect computers anywhere in your home or ofce network. Why D-Link Wireless ? D-Link is ...

  • D-Link DAP-1150 - page 70

    70 D-Link DAP-1150 User Manual Appendix B - Wireless Basics Wireless Personal Area Network (WPAN) Bluetooth is the industry standard wireless technology used for WPANs. Bluetooth devices in WPANs operate in a range up to 30 feet away. The speed and wireless operation range of a WPAN is less than of a WLAN, but it excels in its efcient consumptio ...

  • D-Link DAP-1150 - page 71

    71 D-Link DAP-1150 User Manual Appendix B - Wireless Basics Where is wireless used? Wireless technology is quickly expanding beyond home and ofce use. The freedom of mobility it offers is becoming so popular that more and more public facilities are now providing wireless access to attract people. Public places that offer wireless access is usual ...

  • D-Link DAP-1150 - page 72

    72 D-Link DAP-1150 User Manual Appendix B - Wireless Basics Security Don’t let your next-door neighbors or unwanted intruders connect to your wireless network. Secure your wireless network by turning on the WEP or WPA security feature on the access point. Refer to the section “Wireless Security” in this manual for detailed information on how ...

  • D-Link DAP-1150 - page 73

    73 D-Link DAP-1150 User Manual Appendix C - Networking Basics Networking Basics Check your IP address After you install your network adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below. Click on Start > Run ...

  • D-Link DAP-1150 - page 74

    74 D-Link DAP-1150 User Manual Appendix C - Networking Basics Statically Assign an IP address If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below: Step 1 Windows ® XP - Click on Start > Control Panel > Network Connections . Windows ® 2000 - From the desktop, right-clic ...

  • D-Link DAP-1150 - page 75

    75 D-Link DAP-1150 User Manual Appendix D - Technical Specications Technical Specications NETWORK STANDARDS - 802.11g wireless LAN - 802.11b wireless LAN - 802.3/802.3u 10BASE-T/100BASE-TX Ethernet - ANSI/IEEE 802.3 NWay auto-negotiation DEVICE INTERFACES - 802.11g wireless LAN - One 10/100BASE-TX Ethernet LAN port OPERATING FREQUENCY 2.4 to ...

  • D-Link DAP-1150 - page 76

    76 D-Link DAP-1150 User Manual Appendix D - Technical Specications SECURITY - 64/128-bit WEP data encryption - WPA-PSK, WPA2-PSK - WPA-EAP, WPA2-EAP - TKIP, AES - MAC address ltering - SSID broadcast disable function QUALITY OF SERVICE (QoS) Wi-Fi Multimedia (WMM) DEVICE MANAGEMENT - Web- based manag ement throug h Internet Exp lorer v.6 or l ...

  • D-Link DAP-1150 - page 77

    Version 1.10 2009/04/15 ...

Manufacturer D-Link Category Access Point

Documents that we receive from a manufacturer of a D-Link DAP-1150 can be divided into several groups. They are, among others:
- D-Link technical drawings
- DAP-1150 manuals
- D-Link product data sheets
- information booklets
- or energy labels D-Link DAP-1150
All of them are important, but the most important information from the point of view of use of the device are in the user manual D-Link DAP-1150.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals D-Link DAP-1150, service manual, brief instructions and user manuals D-Link DAP-1150. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product D-Link DAP-1150.

Similar manuals

A complete manual for the device D-Link DAP-1150, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use D-Link DAP-1150 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of D-Link DAP-1150.

A complete D-Link manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual D-Link DAP-1150 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the D-Link DAP-1150, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the D-Link DAP-1150, that we can find in the current document
3. Tips how to use the basic functions of the device D-Link DAP-1150 - which should help us in our first steps of using D-Link DAP-1150
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with D-Link DAP-1150
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of D-Link DAP-1150 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning D-Link DAP-1150?

Use the form below

If you did not solve your problem by using a manual D-Link DAP-1150, ask a question using the form below. If a user had a similar problem with D-Link DAP-1150 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)