Manual Mustek LM-3000

12 pages 0.09 mb
Download

Go to site of 12

Summary
  • Mustek LM-3000 - page 1

    LM-3000 LCD MONITOR USER’S MANUAL ...

  • Mustek LM-3000 - page 2

    SOME IMPORTANT NOTES FCC NOTICE This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions manual, may cause interference to radio communications. It has been tested and found to comply with limits for a Class A digital device pursuant to subpart J of Part 15 of FCC Rule ...

  • Mustek LM-3000 - page 3

    LM-3000 USER’S MANUAL - page 1 I. OVERVIEW LM-3000 is a highly luminant with low shadow effect 12.1” LCD monitor. It is economical of pace and provides broad display area almost compatible to that of a 14” CRT monitor for PC application. II. PA CKAGE CONTENTS • LCD PANEL WITH CABLE INSTALLED • VGA ADAPTOR CARD – PST032 • DRIVER UTILIT ...

  • Mustek LM-3000 - page 4

    LM-3000 USER’S MANUAL - page 2 IV. DISPL AY ADAPTOR CARD INS TALL ATION The attached PST032 is a PCI bus SVGA adaptor card which offers a 50 pin SCSI type connector for LM-3000 ( Do not connect any device other than the LM-3000 LCD monitor to this port even if it was using a SCSI connector! ) and a 3 x 5 D sub connector for external SVGA monitor. ...

  • Mustek LM-3000 - page 5

    LM-3000 USER’S MANUAL - page 3 V. CABLE CONNECTION Attention : Never connect the cable while power on! The cable length is 1.5 M, that allows the user to arrange the LM- 3000 at any place within this range from the PC. At one end of the cable attached is a SCSI 50 pin connector, at the other end, the connections are already installed to the rear ...

  • Mustek LM-3000 - page 6

    LM-3000 USER’S MANUAL - page 4 VI. UTILITY INS TALL ATION A. For Windows 3.1 The drivers for Windows 3.1 are delivered in a separate 3.5” floppy diskette with the LCD monitor. To install the drivers for Windows 3.1 with the LCD monitor, the user should make sure that the Windows 3.1 is running properly using standard VGA driver. 1. Select the M ...

  • Mustek LM-3000 - page 7

    LM-3000 USER’S MANUAL - page 5 start with CHIPS followed by either the number 65550 or 6555X then followed by the matrix of resolution and colors. 17. Select Restart Windows to make the selected driver effective. B. For Windows 95 The following describes normal display driver installation procedures for Windows 95. Use these procedures when insta ...

  • Mustek LM-3000 - page 8

    LM-3000 USER’S MANUAL - page 6 C. For Windows NT 3.5x The drivers for Windows NT of versions 3.5x are stored in a subdirectory named NT35 in the diskette. 1. Run Windows NT Setup from Main Group 2. Choose O ption from the menu (Alt-O) 3. Select C hange system setting (Alt-C) 4. Choose " O ther" under display section 5. Insert display dr ...

  • Mustek LM-3000 - page 9

    LM-3000 USER’S MANUAL - page 7 Step 3: Upon restart, select the desired display settings from the Display property dialog box. Click on Test to test the newly selected graphics mode. A color test screen should appear, followed by the Testing Mode window. Click on Yes to continue. The Display Settings Change window will appear. Click on Restart No ...

  • Mustek LM-3000 - page 10

    LM-3000 USER’S MANUAL - page 8 Swivel Tilt Contrast control knob Brightness control knob ...

  • Mustek LM-3000 - page 11

    LM-3000 USER’S MANUAL - page 9 VIII. SPECIFIC ATION MODEL: LM-3000 Panel: 12.1 ” DSTN COLOR Max. Resolution: SVGA 800 x 600 Effective Display Area: 247.02 (W) x 185 .76 (H) mm Response Time: 250 ms Backlight: SIDE-EDGE TYPE CFL x 2 TUBES Polarizer: NON-GLARE TREATMENT Dot Size: 0.0821 (W) x 0 .2863 (H) mm Dot Pitch: 0.2021 (W) x 0 .3063 (H) mm ...

  • Mustek LM-3000 - page 12

    LM-3000 USER’S MANUAL - page 10 DISCLAIMER The manufacturer of the LCD display system makes no representations or warranties, either expressed or implied, by or with respect to anything in this manual, and shall not be liable for any implied warranties of fitness for a particular purpose or for any indirect, special or consequential damages. Info ...

Manufacturer Mustek Category Computer Monitor

Documents that we receive from a manufacturer of a Mustek LM-3000 can be divided into several groups. They are, among others:
- Mustek technical drawings
- LM-3000 manuals
- Mustek product data sheets
- information booklets
- or energy labels Mustek LM-3000
All of them are important, but the most important information from the point of view of use of the device are in the user manual Mustek LM-3000.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Mustek LM-3000, service manual, brief instructions and user manuals Mustek LM-3000. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Mustek LM-3000.

Similar manuals

A complete manual for the device Mustek LM-3000, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Mustek LM-3000 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Mustek LM-3000.

A complete Mustek manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Mustek LM-3000 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Mustek LM-3000, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Mustek LM-3000, that we can find in the current document
3. Tips how to use the basic functions of the device Mustek LM-3000 - which should help us in our first steps of using Mustek LM-3000
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Mustek LM-3000
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Mustek LM-3000 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Mustek LM-3000?

Use the form below

If you did not solve your problem by using a manual Mustek LM-3000, ask a question using the form below. If a user had a similar problem with Mustek LM-3000 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)