-
John Lewis JLDWS1202 - page 1
JLD WS1202 Dishwasher Instruction man ual ...
-
John Lewis JLDWS1202 - page 2
2 Dear Customer , Please r ead this user information car efully and keep it to refer to later . Please pass the user information on to any future owner of the appli- ance. The following symbols ar e used in the text: 1 Safety instructions War n i n g ! Information that affects your personal safety . Important! Informati on that prevents damage to t ...
-
John Lewis JLDWS1202 - page 3
3 Contents Oper ating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Diagra m of Appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Contro ...
-
John Lewis JLDWS1202 - page 4
4 Oper ating Instructions 1 Safety Prior to using for the first time • Follow the ”Instructions for install ation and connect ion” . Corr ect Use • The dishwasher is only intended for washing domestic dishes. • Additions or modifications to the dishwasher ar e not permitted. • Use only special salt, detergent and rinse aid suitable for ...
-
John Lewis JLDWS1202 - page 5
5 Gener al Safety • Repairs to the dishwasher ar e only to be carried out by qualified/au- thorised service engineers. • When the dishwasher is not being used, switch it off and shut off the water tap. • Never unplug the appliance by pullin g on the cable. Always pull the plug. • E n s u re t h a t t h e d o o r o f t h e d i s h w a s h e ...
-
John Lewis JLDWS1202 - page 6
6 Diagr am of Appliance Contr ol P anel To use the appliance, always open the dishwasher door first. The ON/OFF button is used to turn the dishwasher on and off. Top Spr ay Nozzle Upper basket spray arm and lower spray arm Water softener unit. Salt Container Detergent Dispenser Rinse aid dispenser Rating plate Filters ON/OFF button ...
-
John Lewis JLDWS1202 - page 7
7 The Pr ogramme buttons are used to select the desir ed dishwashing cy- cle. Function buttons : In addition to the pre-set dishwashing cycle, the following functions can also be set using these buttons: The multi-display can indicate: – the level of har dness to which the water softener is set. – whether the rinse aid dispenser has been activa ...
-
John Lewis JLDWS1202 - page 8
8 Prior to Using for the First Time 1. Set the water softener 2. Fill up with dishwasher salt 3. Fill up with rinse aid 3 If you wish to use 3in1 detergent, do the following: – First r ead the section “Using 3in1 detergents” . – Switch on the dishwasher , press 3i n1 button. The button indicator lights up: 3in1 function is selected. As a re ...
-
John Lewis JLDWS1202 - page 9
9 3 If the LED indicator of only one pr ogr amme button is illuminated, this wash progr amme has been activated. The wash pr ogramme must be deselected: Press function buttons 2 and 3 simultaneously for approx. 2 seconds. The LED indicators of a ll the buttons tha t can be selected will illumi- nate. Exception: The 3in1 button will only illuminate ...
-
John Lewis JLDWS1202 - page 10
10 Adding Dishwasher Salt To decalcify the water soft ener , it mu st be filled up with dishwasher salt. Use only special salt suitable for domestic dis hwashers. If you do not use 3 in1 detergent, fill up with dishwasher salt: – Before usin g the dishwasher for the first time. – When the contr ol indicator for dishwa sher salt is illuminated o ...
-
John Lewis JLDWS1202 - page 11
11 Filling Up with Rinse Aid Rinse aid causes the rinse water to fl ow easily from the cr ockery leav- ing gleaming dishes and glassware. If you do not use 3in1 detergent, fill up with rinse aid: – Before usin g the dishwasher for the first time. – When the control indicator for rinse aid is illuminated on the contr ol panel. Use only special r ...
-
John Lewis JLDWS1202 - page 12
12 Setting the Amount of Rinse Aid Requir ed 3 Only change the amount dispensed, if smears, milky spots (reduce the amount) or dried on water spots (inc rease the amount) can be seen on glasses and dishes. (See section “If di shwashing results are not satisfac- tory” .) The dosage can be set fr om 1-6. The dosage is pr e-set to “4” in the f ...
-
John Lewis JLDWS1202 - page 13
13 4. Pressing function button 2 activates and deactivates the rinse aid dis- pensing function. 5. Once the multi-display is indicating the requir ed setting, pr ess the ON/ OFF button. The setting is now saved. Activating/Deactivatin g the Acoustic Signal In addition to the optical display (e .g. indicating the end of the cycle, error s) you can a ...
-
John Lewis JLDWS1202 - page 14
14 In Daily Use Loading Cutlery and Dishes 1 Sponges, cleaning cloths and any ot her objects that ca n absorb water must not be washed in the dishwash er . Plastic and Teflon-coated dishes and pans tend to r etain water droplet s. These dishes an d pans therefor e do not dry as well as those made of china and stainless steel. • Before loading the ...
-
John Lewis JLDWS1202 - page 15
15 Loading cutlery 1 War n i n g : Sharp knives and other items of cutlery with sharp edges must be laid in the cutlery r ack or in the upper basket to avoid the risk of injury . To ensur e that all items of cutlery in the cutlery basket can be r eached by the water , you should: For lar ger utensils, such as whisks, leave off one half of the cutle ...
-
John Lewis JLDWS1202 - page 16
16 Po t s, Pa n s, L a rg e P l a te s Load larger and heavily soiled dishes and pans in the lower basket. (Max. diameter for plates 29 cm). To make it easier to load lar ger dish- es, all rear plate r ests in the lower basket can be folded down. Cups , Glasses, Coffe e Service Load smaller , fr agile crockery and long, sharp cutlery in the upper b ...
-
John Lewis JLDWS1202 - page 17
17 • The cup r acks can be folded up out of the way for tall cr ockery items. • Lay or hang wine and b randy glasses in the slots in the cup rac k s . • For glasses with long stems, fold the glass r ack to the right, other- wise fold it away to the left. • The row of spikes on the left of the upper basket is also in two parts and can be fol ...
-
John Lewis JLDWS1202 - page 18
18 Adjusting the Height of the Upper Basket 3 The height of the baskets can also be adjusted when they are loaded. Raising/Lowering the Upper Bas- ket 1. Pull out the upper basket complete- ly . 2. Raise the upper bask et as far as it will go and then lower it vert ically . The upper basket will latch into the lower or the upper position. Maximum h ...
-
John Lewis JLDWS1202 - page 19
19 Adding Deter gent De t e rge n t s re mo v e t h e di r t f ro m dishes and cutlery . The detergent must be added befor e the cycle starts. 1 Only use deter gent intended for do- mestic dishwashers. The detergent compartment is lo- cated on the inside of the door . 1. If the lid is closed: Press the release button. The lid will spring open. 2. P ...
-
John Lewis JLDWS1202 - page 20
20 Concentr ated detergents Today’ s deter gents for dishwashers ar e almost exclusively low-alkaline concentrated deter gents with natu r al enzymes in tablet or powder form. 2 Using 50°C dishwashing cycles in co njunction with these concentrated detergents r educes pollution and is good for your dishes, as these dish- washing cycles are specia ...
-
John Lewis JLDWS1202 - page 21
21 Selecting the Dishwashing Cycle (Cycle Ta ble) Dishwashing- cycle Suitable for: Type of soiling Progr amme sequence Consumption values 1) 1) The consu mption value s were obtained under stand ardised conditions. They depend on how full the baskets for th e dishes are. Variat ions are ther efore possible in practice. Pre-wash Main wash Intermedia ...
-
John Lewis JLDWS1202 - page 22
22 Starting a Dishwashing Cycle 1. Check that the spray arms can turn fr eely . 2. Turn the water tap on fully . 3. Press the ON/OFF button. 4. Select the desired cycle. The pr ogramme indicator comes on. The r emaining time expected for the cycle will be shown in the multi-dis play . 3 During the dishwashing cycle, the remaining time shown in the ...
-
John Lewis JLDWS1202 - page 23
23 Setting the Delay Timer 3 With the delay timer you can delay t he start of a dishwash ing cycle for between 1 and 19 hours. 1. Press the Delay Timer button r epeat edly until th e multi-display shows the desired time delay , for example 12h , if the cycle is to start in 12 hours. The Dela y Timer indicator is illuminated. 2. Select dishwashing c ...
-
John Lewis JLDWS1202 - page 24
24 Switching Off the Dishwasher When the dishwasher cycle has ended, the dot-shaped light signal be- low the door of the appliance goes out. If the acoustic signal has been enabled, a continuous tone will sound for 15 seconds at the end of the dishwashing cycle. If the dishwasher door is not opened, the acoustic signal sounds again after 3 and 6 mi ...
-
John Lewis JLDWS1202 - page 25
25 Cleaning the Filters 3 The filters must be r egularly checked and cleaned. Dirty filters will spoil the wash results. 1. Open the door and remove the lower basket. 2. Turn the handle about ¼ of a turn anticlockwise (A) and remove the fil- ter system (B). 3. Grasp the gr ip hole on the fine filter (1) and remove it fr om the micro-fil- ter (2). ...
-
John Lewis JLDWS1202 - page 26
26 What to do if... Remedying Small Malfunctions In the event of a fault, the ligh t signal at floor level flashes. If the acousti c signal is activate d, warning tones sound if there ar e faults. If one of the following fault codes is displayed in the multi-display dur- ing operation: – Fault code Å1 0 (Pr oblems with water inlet), – Fault co ...
-
John Lewis JLDWS1202 - page 27
27 2 short warning tones continuously repeated can be heard. The cycle indicator for the selected dishwashing cycle is flashing, fault code Å2 0 is dis- played in the multi-d is- play . (Problems with water outflow) The sink spigot connection is blocked. Clean the sink spigot outlet. Wat er dra in h os e has not been co rrectly posi- tioned. Check ...
-
John Lewis JLDWS1202 - page 28
28 If the Dishwashing Results ar e not Satisfactory The dishes are still dirty . • The wrong dishwashing cycle was selected. • The dishes were loaded is such a way that the dishwashing water did not reach all items. The baskets for the dishes must not be overload- ed. • The filters in the base of the washing compartment ar e dirty or incor- r ...
-
John Lewis JLDWS1202 - page 29
29 Disposal 2 Packaging material The packaging materials are envir onmentally friendly and can be r ecy- cled. The plastic components are id entified by markings, e.g. >PE<, >PS<, etc. Please dispose of the pa ckaging materials in the appropriate container at your local waste disposal facilities. 2 Old appliance Please dispose of your o ...
-
John Lewis JLDWS1202 - page 30
30 Notes for T est Institutes Testing in accor dance with EN 60 7 04 must be carried out with the appliance fully loaded and using th e test cycle (see “Cycle T able”). Tests in accor dance with EN 5024 2 must be carried out when the salt dispenser in the water softener and the rinse aid dispenser have been filled with salt and rinse aid respec ...
-
John Lewis JLDWS1202 - page 31
31 Lower basket with cutlery basket *) Cutlery basket *) If there are cup r acks in place on the lefthand side o r if beer glass holders are in place, remove them. ...
-
John Lewis JLDWS1202 - page 32
32 Installation and Connection Instructions 1 Safety Information for the Installation • Only tr ansport the dishwasher in an upright position, otherwise salt water may run out. • Before using th e dishwasher for the first ti me, check for any damage caused in transport. Do not under any circumstances connect an ap- pliance that is damaged. In t ...
-
John Lewis JLDWS1202 - page 33
33 Installing the Dishwasher • The dishwasher must be installed on a firm floor and adjusted to en- sure that it is stable and level in all dir ections. • To over come irr egularities in the floor and to match the height of the appliance to that of surround- ing units, extend the thr eaded feet using a screwdriver . • The drain hose, inlet ho ...
-
John Lewis JLDWS1202 - page 34
34 Fr ee-standing appliances 1 If the dishwasher is installed dir ect ly next to a cooker , a heat-insulat- ing, non-flammable panel (laminated with aluminium foil on the side next to th e cooker) must be fitt ed flush with the top edge of the wo rk surface (depth 57.5 cm). If the appliance is built-in under a kitchen work su rface, the worktop sup ...
-
John Lewis JLDWS1202 - page 35
35 Connecting the Dishwasher Connecting to the water supply • The dishwasher must only be connected to a cold water supply . • The dishwasher must not be connect ed to open hot water appliances or instantaneous water heater s. P ermitted water pressur e Connecting the inlet hose 1 The water inlet hose mus t not be kinked, crushed or entang led ...
-
John Lewis JLDWS1202 - page 36
36 W ater drainage Drain hose 1 The drain hose must not be kinked, crushed or entangled. Connecting the drai n hose: – Maximum permitted height: 1 metre. – Minimum requir ed height: 40 cm above the bottom edge of the ap- pliance. Extension hoses • Extension hoses are available fr om your local Service Force Centr e. T o ensur e that the funct ...
-
John Lewis JLDWS1202 - page 37
37 Electrical Connection Any electrical work required to install this appliance should be car- ried out by a qualified elec trician or competent person. 1 WARNING - This appliance must be earthed. The manufacturer declines any r esp onsibility should these safety measures not be observed. Before switching on make sur e th e electricity supply volta ...
-
John Lewis JLDWS1202 - page 38
38 Connecting systems The water inlet hose, drain hose and the mains cable must all be con- nected to the side of the dishwasher as there is no space for them be- hind the appliance. 2 connection pi eces 45° or straight, outer ø 19 mm, length 30 mm double valve water- drainage water inlet water- inlet mains cable water- drainage mains socket main ...
-
John Lewis JLDWS1202 - page 39
39 Service and Spar e P arts I n the event of your appliance r equi r ing service, or i f you w i sh to pur- chase spare parts, please contact ou r extended warranty administr ator s by telephoning: They will give you details for your local Service Fo rce Centr e. Before calling out an engineer , please ensur e you have read the details under the h ...
-
John Lewis JLDWS1202 - page 40
John Le wis part nership 171 Victoria Street London SW1E 5NN www . johnlewis.com 822 6 1 2 398-00- 0112 04-02 Subject to change w i thout not i ce ...
Do you have a question concerning John Lewis JLDWS1202?
Use the form below
If you did not solve your problem by using a manual John Lewis JLDWS1202, ask a question using the form below. If a user had a similar problem with John Lewis JLDWS1202 it is likely that he will want to share the way to solve it.