Manual DeVillbiss Air Power Company MG7-OFTWIN

16 pages 0.12 mb
Download

Go to site of 16

Summary
  • DeVillbiss Air Power Company MG7-OFTWIN - page 1

    DeVilbiss Air Power Company • 213 Industrial Drive • Jackson, TN 38301-9615 MG7-OFTWIN REV. 11/5/98 SAFETY GUIDELINES ....................................................... 1 WARRANTY STATEMENT ................................................. 2 WARNING CHART ......................................................... 3-4 GLOSSARY .............. ...

  • DeVillbiss Air Power Company MG7-OFTWIN - page 2

    2 — ENG ❏ Retain original cash register sales receipt as proof of purchase for warranty work. ❏ Use reasonable care in the operation and maintenance of the product as described in the Owners Manual(s). ❏ Deliver or ship the product to the nearest DeVilbiss Air Power Authorized Warranty Service Center. Freight costs, if any, must be paid by ...

  • DeVillbiss Air Power Company MG7-OFTWIN - page 3

    3 — ENG RISK OF BURSTING RISK OF EXPLOSION OR FIRE RISK OF ELECTRICAL SHOCK AIR TANK THE FOLLOWING CONDITIONS COULD LEAD TO A WEAKENING OF THE TANK, AND RESULT IN A VIOLENT TANK EXPLOSION: 1. FAILURE TO PROPERLY DRAIN CONDENSED WATER FROM THE TANK, CAUSING RUST AND THINNING OF THE STEEL TANK. 2. MODIFICATIONS OR ATTEMPTED REPAIRS TO THE TANK. 3. ...

  • DeVillbiss Air Power Company MG7-OFTWIN - page 4

    4 — ENG HAZARD RISK OF ELECTRICAL SHOCK (cont’d) RISK FROM FLYING OBJECTS RISK TO BREATHING RISK OF FALLING RISK FROM MOVING PARTS RISK OF BURNS WHAT CAN HAPPEN REPAIRS ATTEMPTED BY UNQUALIFIED PER- SONNEL CAN RESULT IN SERIOUS INJURY OR DEATH BY ELECTROCUTION. ELECTRICAL GROUNDING: FAILURE TO PROVIDE ADEQUATE GROUNDING TO THIS PRODUCT COULD RE ...

  • DeVillbiss Air Power Company MG7-OFTWIN - page 5

    5 — ENG DAMAGE : Each air compressor outfit is carefully tested and checked before shipment. With improper handling, damage may result in transit and cause problems in compressor operation. Immediately upon arrival, check equipment for both concealed and visible damages to avoid expenses being incurred to correct such problems. This should be don ...

  • DeVillbiss Air Power Company MG7-OFTWIN - page 6

    6 — ENG DESCRIPTION OF OPERA TION It may be necessary to brace or support one end of the outfit when attaching the wheels and the rubber foot strip because the air compressor will have a tendency to tip. TOOLS NEEDED FOR ASSEMBL Y • a 3/8" open end wrench or socket to tighten handle screws • a 9/16" socket or open end wrench for att ...

  • DeVillbiss Air Power Company MG7-OFTWIN - page 7

    7 — ENG It may be necessary to brace or support one side of the outfit when removing the shipping boards be- cause the air compressor will have a tendency to tip. 1. Remove all packaging such that only the compressor on the pallet remains. Remove and discard the (4) screws and washers that hold the compressor to the pallet. 2. Stationary air comp ...

  • DeVillbiss Air Power Company MG7-OFTWIN - page 8

    8 — ENG Additional Regulators and Controls Since the air tank pressure is usually greater than that which is needed, a separate regulator is usually employed to control the air pressure ahead of any individual air driven device. Break-in Procedures Serious damage may result if the following break- in instructions are not closely followed. This pr ...

  • DeVillbiss Air Power Company MG7-OFTWIN - page 9

    9 — ENG INSTALLATION AND BREAK-IN PROCEDURES (cont'd) RISK OF ELECTRICAL SHOCK. IMPROPER ELECTRICAL GROUNDING CAN RESULT IN ELECTRICAL SHOCK. WIRING FOR THIS UNIT SHOULD BE DONE BY A LICENSED ELECTRI- CIAN IN ACCORDANCE WITH NATIONAL AND LOCAL CODES AND ORDINANCES. This unit was not designed to operate on 208 volts. Install the compressor as ...

  • DeVillbiss Air Power Company MG7-OFTWIN - page 10

    10 — ENG Air Filter - Inspection and Replacement Keep the air filter clean at all times. Do not operate the compressor with the air filter removed. A dirty air filter will not allow the compressor to operate at full capacity. Before you use the compressor, check the air filter to be sure it is clean. If it is dirty, simply pull it out. You may wa ...

  • DeVillbiss Air Power Company MG7-OFTWIN - page 11

    11 — ENG 2. Protect the electrical cord and air hose from damage (such as being stepped on or run over). Wind them loosely around the compressor handle. 3. Store the air compressor in a clean and dry location. Before you store the air compressor, make sure you do the following: 1. Review the “Maintenance” and "Operating Procedures" ...

  • DeVillbiss Air Power Company MG7-OFTWIN - page 12

    12 — ENG PROBLEM CAUSE Move the pressure switch lever to the “OFF” posi- tion. If the outfit doesn’t shut off, unplug. If the electrical contacts are welded together, replace the pressure switch. Contact an authorized service center to check and replace pressure switch. Tighten fittings where air can be heard escaping. Check fittings with s ...

  • DeVillbiss Air Power Company MG7-OFTWIN - page 13

    13 — ENG PROBLEM CAUSE CORRECTION Motor overload protection switch has tripped. Tank pressure exceeds pressure switch “cut-in” pressure. Wrong gauge wire or length of exten- sion cord. Check valve stuck open. Loose electrical connections. Possible defective motor or capacitor. Paint spray on internal motor parts. Fuse blown, circuit breaker t ...

  • DeVillbiss Air Power Company MG7-OFTWIN - page 14

    14 — ENG SERVICE NOTES NOT AS DE SER VICIO NOTES SUR LE SERVICE ...

  • DeVillbiss Air Power Company MG7-OFTWIN - page 15

    15 — ENG SERVICE NOTES NOT AS DE SER VICIO NOTES SUR LE SERVICE ...

  • DeVillbiss Air Power Company MG7-OFTWIN - page 16

    DeVilbiss Air Power Company • 213 Industrial Drive • Jackson, TN 38301-9615 GENERAL MANUAL FOR PERMANENTL Y LUBRICA TED TWIN CYLINDER AIR COMPRESSORS SERVICE NOTES ...

Manufacturer DeVillbiss Air Power Company Category Air Compressor

Documents that we receive from a manufacturer of a DeVillbiss Air Power Company MG7-OFTWIN can be divided into several groups. They are, among others:
- DeVillbiss Air Power Company technical drawings
- MG7-OFTWIN manuals
- DeVillbiss Air Power Company product data sheets
- information booklets
- or energy labels DeVillbiss Air Power Company MG7-OFTWIN
All of them are important, but the most important information from the point of view of use of the device are in the user manual DeVillbiss Air Power Company MG7-OFTWIN.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals DeVillbiss Air Power Company MG7-OFTWIN, service manual, brief instructions and user manuals DeVillbiss Air Power Company MG7-OFTWIN. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product DeVillbiss Air Power Company MG7-OFTWIN.

A complete manual for the device DeVillbiss Air Power Company MG7-OFTWIN, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use DeVillbiss Air Power Company MG7-OFTWIN by users. Manuals are usually written by a technical writer, but in a language understandable to all users of DeVillbiss Air Power Company MG7-OFTWIN.

A complete DeVillbiss Air Power Company manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual DeVillbiss Air Power Company MG7-OFTWIN - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the DeVillbiss Air Power Company MG7-OFTWIN, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the DeVillbiss Air Power Company MG7-OFTWIN, that we can find in the current document
3. Tips how to use the basic functions of the device DeVillbiss Air Power Company MG7-OFTWIN - which should help us in our first steps of using DeVillbiss Air Power Company MG7-OFTWIN
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with DeVillbiss Air Power Company MG7-OFTWIN
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of DeVillbiss Air Power Company MG7-OFTWIN in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning DeVillbiss Air Power Company MG7-OFTWIN?

Use the form below

If you did not solve your problem by using a manual DeVillbiss Air Power Company MG7-OFTWIN, ask a question using the form below. If a user had a similar problem with DeVillbiss Air Power Company MG7-OFTWIN it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)