English dropdown-ico

Manual Henny Penny OE 301

8 pages 0.65 mb
Download

Go to site of 8

Summary
  • Henny Penny OE 301 - page 1

    enny This section provides the installation instructions for the Henny Penny Fry Station. Installation of the unit should be performed only by a qualified service technician. Do not puncture the unit with any objects such as drills or screws as component damage or electrical shock could result. The Henny Penny Fry Station has been tested, inspected ...

  • Henny Penny OE 301 - page 2

    The proper location of the Fry Station is very important for operation, speed, and convenience. The location of the fiy station should allow clearances for servicing and proper operation. Choose a location which will provide easy loading and unloading without interfering with the final assembly of food orders. Operators have found that frying from ...

  • Henny Penny OE 301 - page 3

    When installing the gas fry station do not attach an exten- sion to the gas flue exhaust stack. This may impair proper operation of the burner, causing malfunctions and possible negative back draft. The gas fry station is factory available for either natural or propane gas. Check the data plate inside the front door of the cabinet to determine the ...

  • Henny Penny OE 301 - page 4

    T INIMU~I PULL of equip- ment away from wall permissible for accessi- bility to Quick Disconnect Device. AVOID SHARP BENDS AND KINKS when pulling equipment away from wall. (Max- imum pull will kink ends, even if installed properly, and reduce Connector life.) ~ QUICK DISCON. NECT DEVICE while extended at MAXIMUM PULL NOT ADVISED WHILE CONNECTED Cou ...

  • Henny Penny OE 301 - page 5

    A standard one inch, black steel pipe and malleable fittings should be used for gas service connections. Do not use cast iron fittings. Although one inch size pipe is‘reconunended, piping should be of adequate size and installed to provide a supply of gas sufficient to meet the maximum demand without undue loss of pressure between the meter and t ...

  • Henny Penny OE 301 - page 6

    The following steps provide the pilot PROCEDURE lighting procedure: 1. Open doors and open gas shut-off valve. (see illustrations) 2. The gas cock dial has a dual function: a. Complete control of gas to the pilot and main burner. b. When in the pilot position, it is the reset mechanism for the automatic pilot. 3. Partially depress and turn the cont ...

  • Henny Penny OE 301 - page 7

    Depress lightly and turn manual lever on gas valve to the OFF position. The gas pressure regulator on the automatic gas valve is factory set as follows: @ Natural: 3.5 inches water column. * Propane 10 0 inches water column. e 120 V, 50/60 Hz., 12 A, 1 PH 0 230 V, 50/60 HZ., 6 A, 1 PH The gas fry station requires a 3 wire grounded service. I W ING ...

  • Henny Penny OE 301 - page 8

    I The OE-301/302/303 is available from the factory wired 208, or 220/240 volts, 50 or 60 hertz source. Refer to the table below for supply wiring and fusing. Volts Phase KW Amps 208 3 11.25 31 208 3 13.50 38 220/240 3 11.25 30132 2201240 3 13.50 33135 400 3 11.25 16 400 3 13.50 20 This fry station must be adequately and safely grounded. Refer to lo ...

Manufacturer Henny Penny Category Fryer

Documents that we receive from a manufacturer of a Henny Penny OE 301 can be divided into several groups. They are, among others:
- Henny Penny technical drawings
- OE 301 manuals
- Henny Penny product data sheets
- information booklets
- or energy labels Henny Penny OE 301
All of them are important, but the most important information from the point of view of use of the device are in the user manual Henny Penny OE 301.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Henny Penny OE 301, service manual, brief instructions and user manuals Henny Penny OE 301. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Henny Penny OE 301.

Similar manuals

A complete manual for the device Henny Penny OE 301, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Henny Penny OE 301 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Henny Penny OE 301.

A complete Henny Penny manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Henny Penny OE 301 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Henny Penny OE 301, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Henny Penny OE 301, that we can find in the current document
3. Tips how to use the basic functions of the device Henny Penny OE 301 - which should help us in our first steps of using Henny Penny OE 301
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Henny Penny OE 301
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Henny Penny OE 301 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Henny Penny OE 301?

Use the form below

If you did not solve your problem by using a manual Henny Penny OE 301, ask a question using the form below. If a user had a similar problem with Henny Penny OE 301 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)