English dropdown-ico

Manual CrimeStopper EZ-90

12 pages 1.39 mb
Download

Go to site of 12

Summary
  • CrimeStopper EZ-90 - page 1

    EZ-90 / EZ-91 REMOTE ENGINE STARTING SYSTEM OPERATING INSTRUCTIONS INTRODUCTION **IMPORTANT NOTES:- FOR EZ-91 MODEL ONLY** The EZ-91 model is an add-on (expansion uni t), without remotes or antenna. It must be controlled by an existing alarm or keyless entry system (host system ). The “Infinity Run” feature is not available on an EZ-91 system. ...

  • CrimeStopper EZ-90 - page 2

    TABLE OF CONTENTS Operation Cautions & Warnings…….……………..….…………………………………….…………………………2 Using the Remote Transmitter…………………………………………………………………………………...…….3 Remote Engine Control…………….…..………………… ...

  • CrimeStopper EZ-90 - page 3

    USING THE REMOTE TRANSMITTER The transmitter supplied with the EZ-90 system has six buttons. The button configuration of the EZ-90 is Factory-set and unchangeable. The EZ-91 model does not include remote transmitters, as it is designed for the expansion of a “parent” remote keyless or alarm system. See Page 11 for additional information on how ...

  • CrimeStopper EZ-90 - page 4

    REMOTE ENGINE CONTROL REMOTE ENGINE STARTING - UNSUCCESSFUL START In the event that the engine does not start on the firs t attempt, the system shuts down for a few seconds, then attempts to restart the engine a 2 nd and 3 rd time. For hard starting engines, the unit will allow a starter crank time of up to10 seconds maximum. This should provide am ...

  • CrimeStopper EZ-90 - page 5

    REMOTE ENGINE CONTROL IDLE DOWN MODE - EXITING THE VEHICLE: 1) With vehicle engine running with key, press the Remote Start button for at least one second. (For EZ-91 model activate Green remote start input wire.) 2) Parking Lights will turn ON. 3) Doors will unlock, or if brake pedal is being depressed, doors will unlock when it is released. 4) Tu ...

  • CrimeStopper EZ-90 - page 6

    REMOTE ENGINE CONTROL INFINITY RUN MODE – EXITING THE VEHICLE: 1) With vehicle engine running with the key, press the Remo te Start button for at least 1 second, pause a few seconds, then press and release the remote start button a second time. 2) Parking Lights will start flashing, and doors will unlock. 3) Turn Ignition switch OFF, remove key a ...

  • CrimeStopper EZ-90 - page 7

    TURBO TIMER MODE (OPTIONAL) The optional Turbo Timer mode allows the EZEE system to keep a Turbo or Turbo Diesel vehicle running for 1 to 5 minutes [selectively] after you remove the key, exit t he vehicle, and lock the doors remotely. This is handy for turbo cool-down without the need for expensive turbo timers. This mode requires the use of an ex ...

  • CrimeStopper EZ-90 - page 8

    CONVENIENCE AND SAFETY FEATURES KEYLESS ENTRY (POWER DOOR LOCK CONTROL, Optional) This system enables you to remotely lock and unlock the vehi cle’s doors (if equipped with power locks) via remote control for safety and convenience. Note: This feature may require extra labor and/or parts to install. Press the Lock or Unlock transmitter button as ...

  • CrimeStopper EZ-90 - page 9

    CONVENIENCE AND SAFETY FEATURES VALET MODE / STARTER DISABLE OVERRIDE Before servicing your vehicle or handing the keys over to a Valet we recommend putting the unit into valet mode. The remote start function WILL NOT operate when in Valet m ode. To enter Valet mode, turn the key to the ON position, press and hold Program/Valet sw itch for 5-6 seco ...

  • CrimeStopper EZ-90 - page 10

    TRANSMITTER PROGRAMMING Note: All transmitter codes must be learned at time of programming!! The EZ-90 learns up to 4 different transmitter codes. 1. Open Hood (If no hood pin installed with your system, then you must ground the Gray Hood pin wire). 2. Turn key to the ON position. 3. Press Programming button 4 times, then after a few seconds the un ...

  • CrimeStopper EZ-90 - page 11

    2-VEHICLE OPERATION A single EZ-90 remote can control a second vehicle with an EZEE Start EZ-90 system installed. VEHICLE #2 Press side butto n first, then you have 3 seconds to control v ehicle #2. SETUP: Follow the “Transmitter Progra mming” steps on the second vehicle. Program Car #2’s existing remotes, then quickly press the Car #2 side b ...

  • CrimeStopper EZ-90 - page 12

    TROUBLESHOOTING cont. UNIT CRANKS VEHICLE BUT ENGINE NEVER STARTS: • In extreme cold or severe weather conditions, the unit may take more than the first attempt to start the vehicle. The remote start unit will make up to 3 attempts to start the engine. • In some vehicles, there may be a Factory anti-theft system that will not allow the engine t ...

Manufacturer CrimeStopper Category Remote Starter

Documents that we receive from a manufacturer of a CrimeStopper EZ-90 can be divided into several groups. They are, among others:
- CrimeStopper technical drawings
- EZ-90 manuals
- CrimeStopper product data sheets
- information booklets
- or energy labels CrimeStopper EZ-90
All of them are important, but the most important information from the point of view of use of the device are in the user manual CrimeStopper EZ-90.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals CrimeStopper EZ-90, service manual, brief instructions and user manuals CrimeStopper EZ-90. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product CrimeStopper EZ-90.

Similar manuals

A complete manual for the device CrimeStopper EZ-90, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use CrimeStopper EZ-90 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of CrimeStopper EZ-90.

A complete CrimeStopper manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual CrimeStopper EZ-90 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the CrimeStopper EZ-90, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the CrimeStopper EZ-90, that we can find in the current document
3. Tips how to use the basic functions of the device CrimeStopper EZ-90 - which should help us in our first steps of using CrimeStopper EZ-90
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with CrimeStopper EZ-90
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of CrimeStopper EZ-90 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning CrimeStopper EZ-90?

Use the form below

If you did not solve your problem by using a manual CrimeStopper EZ-90, ask a question using the form below. If a user had a similar problem with CrimeStopper EZ-90 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)