English dropdown-ico

Manual SIIG 04-0621A

8 pages 0.56 mb
Download

Go to site of 8

Summary
  • SIIG 04-0621A - page 1

    04-0621A Max load capacity:100 lbs Tilt angle: 0-12 degrees Installation and Operating Instructions Wall distance: 3.75" / 95mm Built-in bubble level Universal Mounting Pattern Full Motion TV Mount - 23" to 42" IMPORTANT : If you have difficulty following or understanding these installation instructions, please consult a qualified se ...

  • SIIG 04-0621A - page 2

    AG BH CI DJ EK FL M (x2) cable ties (30cm) Do not install on a structure that is prone to vibration, movement or chance of impact. Failure to do so could result in damage to the display and/or damage to the mounting surface. Recommended mounting surfaces: wood stud and solid-flat concrete. If the mount is to be installed on any surface other than w ...

  • SIIG 04-0621A - page 3

    1 2 3 4 a) Wood Stud Installation 3 4 5 Figure 1 6 7 8 Phillips head screw driver Place the wall plate against the wall and line up the mounting slots with the drilled holes. Check the bubble level to verify that the wall plate is level. CAUTION : Do not release the wall plate until it is properly mounted and secured to the wall. Use a high-quality ...

  • SIIG 04-0621A - page 4

    1 2 3 4 5 6 7 Figure 2 1 2 3 4 Figure 3 Figure 4 Figure 4-1 Place your TV screen down on a soft, flat surface, and locate the threaded mounting points that are located on the back of the display (Figure 3). Note: The concrete anchors must be used for concrete and brick installation. Determine which screw (A/B/C/D/E/F) is of the correct length by ca ...

  • SIIG 04-0621A - page 5

    1 2 3 4 5 Figure 5 Figure 8 Figure 7 Figure 6 Figure 9 Swivel Adjustment Figure 10 Maintenance Check the mounting screws every two months for tightness. Step 3 Final Installation & Adjustment Hang the display plate onto the top of the wall plate and slip onto the wall plate as shown (Figure 5). Tilt the display to the desired angle (Figure 6). ...

  • SIIG 04-0621A - page 6

    Blank Page 6 ...

  • SIIG 04-0621A - page 7

    A) If it is within the store's return policy period, please return the product to the store where you purchased from. B) If your purchase has passed the store's return policy period, please follow these steps to have the product repaired or replaced. Step 2 : After obtaining an RMA number, ship the product. SIIG, Inc. 6078 Stewart Avenue ...

  • SIIG 04-0621A - page 8

    April, 2010 Copyright © 2010 by SIIG, Inc. All rights reserved. Full Motion TV Mount - 23" to 42" PRODUCT NAME Full Motion TV Mount - 23" to 42" is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. All other names used in this publication are for identification only and may be trademarks o ...

Manufacturer SIIG Category TV Mount

Documents that we receive from a manufacturer of a SIIG 04-0621A can be divided into several groups. They are, among others:
- SIIG technical drawings
- 04-0621A manuals
- SIIG product data sheets
- information booklets
- or energy labels SIIG 04-0621A
All of them are important, but the most important information from the point of view of use of the device are in the user manual SIIG 04-0621A.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals SIIG 04-0621A, service manual, brief instructions and user manuals SIIG 04-0621A. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product SIIG 04-0621A.

Similar manuals

A complete manual for the device SIIG 04-0621A, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use SIIG 04-0621A by users. Manuals are usually written by a technical writer, but in a language understandable to all users of SIIG 04-0621A.

A complete SIIG manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual SIIG 04-0621A - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the SIIG 04-0621A, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the SIIG 04-0621A, that we can find in the current document
3. Tips how to use the basic functions of the device SIIG 04-0621A - which should help us in our first steps of using SIIG 04-0621A
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with SIIG 04-0621A
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of SIIG 04-0621A in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning SIIG 04-0621A?

Use the form below

If you did not solve your problem by using a manual SIIG 04-0621A, ask a question using the form below. If a user had a similar problem with SIIG 04-0621A it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)