English dropdown-ico

Manual Manley Labs 100 WATT STEREO AMPLIFIER

10 pages 0.03 mb
Download

Go to site of 10

Summary
  • Manley Labs 100 WATT STEREO AMPLIFIER - page 1

    MANLEY LABORATORIES, INC. OWNER'S MANUAL MANLEY 100 W ATT STEREO AMPLIFIER MANLEY LABORATORIES, INC. 13880 MAGNOLIA AVE. CHINO, CA. 91710 TEL: (909) 627-4256 FAX: (909)628-2482 ...

  • Manley Labs 100 WATT STEREO AMPLIFIER - page 2

    CONTENTS INTRODUCTION 3 MAINS CONNECTIONS 4 CONNECTING YOUR AMPLIFIER 5 BIAS PROCEDURES 6 OPERATIONAL NOTES 7 SPECIFICATIONS 8 WARRANTY 9 WARRANTY REGISTRATION 10 SECTION PAGE ...

  • Manley Labs 100 WATT STEREO AMPLIFIER - page 3

    INTRODUCTION ! THANK YOU!... for choosing the Manley Euro 100 Stereo Amplifier. Designed by David Manley, the Manley Euro 100 Stereo Amplifier uses only the best available components, with the shortest and cleanest signal path possible, and with the use of our own milling equipment we can provide you with a amplifier that looks as good as it sounds ...

  • Manley Labs 100 WATT STEREO AMPLIFIER - page 4

    MAINS CONNECTIONS Your amplifier has been factory set to the correct mains voltage for your country. The voltage setting is marked on the serial badge, located on the rear panel. Check that this complies with your local supply. Export units for certain markets have a moulded mains plug fitted to comply with local require- ments. If your unit does n ...

  • Manley Labs 100 WATT STEREO AMPLIFIER - page 5

    CONNECTING YOUR AMPLIFIER Setting up your amplifier is rather easy. 1. Connect all source components (turntable, CD, Tuner, Tape DAT, etc.) to your preamplifier. 2. Connect the interconnects from the output of the preamplifier or switching center to the RCA input on the top rear of the amplifier. 3. Connect the hot or "+" speaker cable to ...

  • Manley Labs 100 WATT STEREO AMPLIFIER - page 6

    BIAS PROCEDURES The Manley Euro Stereo 100 is a fixed bias system that requires very little attention. If you wish to adjust or check the bias, follow the following steps. 1. On diagram 2, which depicts the top panel of the amplifier, you can see 4 black tip jacks and 1 green tip jack. To measure the current draw of each output tube place the posit ...

  • Manley Labs 100 WATT STEREO AMPLIFIER - page 7

    OPERATIONAL NOTES SWITCHING ON The power switch is located on the lower left hand corner of the front panel. Push the top of the rocker switch (1) to turn on the amplifier and the bottom of the rocker to turn off the amplifier. The LED on the right side of the front panel will illuminate indicating that the amplifier is operating. RUNNING It is not ...

  • Manley Labs 100 WATT STEREO AMPLIFIER - page 8

    SPECIFICA TIONS Vacuum Tubes: 4 x Γ Y50 (Output), 2 x 6350 (Driver), 2 x 12AT7 (Input) Output Power 88 Watts @1Khz 1.5%THD, into 5 ohms Frequency Response, +/- .5 dB 10 Hz - 35 KHz Input Sensitivity 800 mV Input Impedance 100 KOhm Load Impedance 5 Ohm S/N Ratio @350W -80 dB Power Consumption 220 Watts Quiescent 420 Watts Full Power Mains Fuse 100, ...

  • Manley Labs 100 WATT STEREO AMPLIFIER - page 9

    W ARRANTY All Manley Laboratories equipment is covered by a limited warranty against defects in materials and workmanship for a period of 90 days from date of purchase to the original purchaser only. A further optional limited 5 year warranty is available to the original purchaser upon proper registration of ownership within 30 days of date of firs ...

  • Manley Labs 100 WATT STEREO AMPLIFIER - page 10

    WARRANTY REGISTRATION We ask that you please fill out this registration form and send the bottom half to: MANLEY LABORATORIES REGISTRATION DEPARTMENT 13880 MAGNOLIA AVE. CHINO CA, 91710 Registration entitles you to product support, full warranty benefits, and notice of product enhancements and upgrades. You MUST complete and return the following to ...

Manufacturer Manley Labs Category Stereo Amplifier

Documents that we receive from a manufacturer of a Manley Labs 100 WATT STEREO AMPLIFIER can be divided into several groups. They are, among others:
- Manley Labs technical drawings
- 100 WATT STEREO AMPLIFIER manuals
- Manley Labs product data sheets
- information booklets
- or energy labels Manley Labs 100 WATT STEREO AMPLIFIER
All of them are important, but the most important information from the point of view of use of the device are in the user manual Manley Labs 100 WATT STEREO AMPLIFIER.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Manley Labs 100 WATT STEREO AMPLIFIER, service manual, brief instructions and user manuals Manley Labs 100 WATT STEREO AMPLIFIER. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Manley Labs 100 WATT STEREO AMPLIFIER.

Similar manuals

A complete manual for the device Manley Labs 100 WATT STEREO AMPLIFIER, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Manley Labs 100 WATT STEREO AMPLIFIER by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Manley Labs 100 WATT STEREO AMPLIFIER.

A complete Manley Labs manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Manley Labs 100 WATT STEREO AMPLIFIER - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Manley Labs 100 WATT STEREO AMPLIFIER, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Manley Labs 100 WATT STEREO AMPLIFIER, that we can find in the current document
3. Tips how to use the basic functions of the device Manley Labs 100 WATT STEREO AMPLIFIER - which should help us in our first steps of using Manley Labs 100 WATT STEREO AMPLIFIER
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Manley Labs 100 WATT STEREO AMPLIFIER
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Manley Labs 100 WATT STEREO AMPLIFIER in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Manley Labs 100 WATT STEREO AMPLIFIER?

Use the form below

If you did not solve your problem by using a manual Manley Labs 100 WATT STEREO AMPLIFIER, ask a question using the form below. If a user had a similar problem with Manley Labs 100 WATT STEREO AMPLIFIER it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)