English dropdown-ico

Manual Ranger RCI-2950DX

11 pages 0.19 mb
Download

Go to site of 11

Summary
  • Ranger RCI-2950DX - page 1

    AM/FM/SSB/CW Dual Band Amateur Mobile Transceiver Owner's Manual RCI-2950 DX RCI-2970 DX -150 - 1 - Table of Contents PAGE Chapter 1 Specifications ....................................................... 2 Chapter 2 Introduction .......................................................... 3 Unpacking ............................................. ...

  • Ranger RCI-2950DX - page 2

    - 2 - Chapter 1 Specifications GENERAL Model RCI-2950DX RCI-2970DX-150 Frequency Range: 12 meter : 10 meter 24.8900 ~24.9900 MHz 28.0000 ~29.6999 MHz 24.8900 ~24.9900 MHz 28.0000 ~29.6999 MHz Tuning Steps 100 Hz, 1 KHz, 10 KHz, 100 KHz, 1 MHz 100 Hz, 1 KHz, 10 KHz, 100 KHz, 1 MHz Emission USB, LSB, CW, AM, FM USB, LSB, CW, AM, FM Frequency Control ...

  • Ranger RCI-2950DX - page 3

    - 4 - Chapter 3 Installation The RCI-2950DX/2970DX-150 is easy to install. All necessary parts (less the antenna and coax cable) have been included to facilitate installation. Transceiver Mounting Choose a suitable location for the transceiver that will allow easy access to the front panel as well as proper air circulation to the back of the unit. ...

  • Ranger RCI-2950DX - page 4

    - 6 - Operation (Continued) 5. SQUELCH CONTROL : This control is used to control or eliminate receiver background noise in the ab sence of an incoming signal. For maximum receiver sensitivity, it is necessary that the control be adjusted only to the point where the receiver background noise is eliminated. Turn fully counterclockwis e and then slowl ...

  • Ranger RCI-2950DX - page 5

    - 8 - Operation (Continued) 20. LOCK BUTTON (LOCK) : Disables the Frequency Selector Control, UP/DOWN buttons on the front co ntrol panel and remote UP/DOWN buttons on the microphone. Pressing this switch again will re-enable the frequency selectors. 21. UP/DOWN SELECTOR : These buttons are used to increase or decrease the frequency digit above the ...

  • Ranger RCI-2950DX - page 6

    - 10 - Operation (Continued) Microphone 1. PTT SWITCH: The Push-To-Talk (PTT) switch controls the transmit and receive function of the radio. Push to transmit and release to receive. 2. REMOTE UP/DOWN SWITCH: The digit on the frequency display above the SHF “cursor” can be stepped up or down by pushing either of these buttons. For best results, ...

  • Ranger RCI-2950DX - page 7

    - 12 - Operation (Continued) Mode Selection To Select an operating mode, rotate the MODE selector, and place it in the desired operating mode position. RF Power Control This feature allows the adjustment of the RF output power continuously over the range of 1W through 25W. - 13 - Chapter 5 Programming Receive Scanning The receive scanning feature a ...

  • Ranger RCI-2950DX - page 8

    - 14 - Programming (Continued) 4. Set the desired frequency you wish to store in memory. 5. Press the ENT button. 6. Repeat the procedure to program other memory channels. Memory Channel Scanning You can scan the 10 pre-programmed memory locations by following the procedure described below: 1. Press MAN button. 2. Press the MEM button. 3. Slowly tu ...

  • Ranger RCI-2950DX - page 9

    - 16 - Frequency Scanning (Continued) Memory Scanning The RCI-2950DX/2970DX-150 has 10 non- volatile memory locations which can be programmed with any frequency within the operating range of the radio. The scan function of th e unit can scan the frequencies in the 10 memory locations. The first step in utilizing the memory scan function is programm ...

  • Ranger RCI-2950DX - page 10

    - 18 - Memo - 19 - Ranger Communications Limited Warranty Ranger Communication, Inc. (Ranger) warrant s to the original purchaser only this product against defects in material or workmanship, as noted below. Effective December 1, 2001, the following Ranger Communications, Inc.'s products are covered by a two (2) year limited warranty: 1. Amate ...

  • Ranger RCI-2950DX - page 11

    - 20 - 401 W. 35 th Street, Sui te B National Cit y, CA 91950 (800) 446-5778 • FAX (619) 426-3788 Email: rci@rangerusa.com http: //www.rangerusa.com PRINTED IN TAIWAN AT2950011I ...

Manufacturer Ranger Category Marine Radio

Documents that we receive from a manufacturer of a Ranger RCI-2950DX can be divided into several groups. They are, among others:
- Ranger technical drawings
- RCI-2950DX manuals
- Ranger product data sheets
- information booklets
- or energy labels Ranger RCI-2950DX
All of them are important, but the most important information from the point of view of use of the device are in the user manual Ranger RCI-2950DX.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Ranger RCI-2950DX, service manual, brief instructions and user manuals Ranger RCI-2950DX. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Ranger RCI-2950DX.

Similar manuals

A complete manual for the device Ranger RCI-2950DX, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Ranger RCI-2950DX by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Ranger RCI-2950DX.

A complete Ranger manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Ranger RCI-2950DX - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Ranger RCI-2950DX, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Ranger RCI-2950DX, that we can find in the current document
3. Tips how to use the basic functions of the device Ranger RCI-2950DX - which should help us in our first steps of using Ranger RCI-2950DX
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Ranger RCI-2950DX
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Ranger RCI-2950DX in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Ranger RCI-2950DX?

Use the form below

If you did not solve your problem by using a manual Ranger RCI-2950DX, ask a question using the form below. If a user had a similar problem with Ranger RCI-2950DX it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)