-
Element Electronics Flat Panel Television - page 1
This TV incorporates High-Denition Multimedia Interface (HDMI TM ) technology . HDMI, the HDMI logo and High-Denition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Condential un ...
-
Element Electronics Flat Panel Television - page 2
ENGLISH ENGLISH 1 FCC F eder al Communications Commission Statement This equipment has been tested and found to comply with the limits of a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, use ...
-
Element Electronics Flat Panel Television - page 3
2 Warnings and Pr ecautions War nings and Precautions Important Safety Instructions T o prevent any injuries, the following safety precautions should be observed in the installation, use, servicing and maintenance of this equipment. Before operating this equipment, please read this manual completely , and keep it nearby for future reference. ▪ Do ...
-
Element Electronics Flat Panel Television - page 4
ENGLISH ENGLISH 3 Warnings and Pr ecautions ▪ If you can not t the plug into the electrical outlet, contact an electrician to install a grounding outlet. ▪ Always operate this equipment from the type of power source indicated on the rear of the serial/model plate. ▪ Never overload wall outlets and extensions. ▪ Use and handle the power c ...
-
Element Electronics Flat Panel Television - page 5
4 Warnings and Pr ecautions Outdoor Antenna Safety Instr uctions Antenna lead-in wire Antenna discharge unit (NEC section 810-20) Grounding conductors (NEC section 810-20) Gr ound clamps Power service grounding (NEC Art250 part H) Ground clamps Electric service equipment NEC : National Electrical code If an outdoor antenna is connected, follow the ...
-
Element Electronics Flat Panel Television - page 6
ENGLISH ENGLISH 5 T ABLE OF CONTENTS Feder al Communi cati ons Comm ission St atem ent .......................... 1 W arnings and Precautions Important Safety Instructions ....................................................................................... 2 Antenna Safety Instructions ............................................................ ...
-
Element Electronics Flat Panel Television - page 7
6 Chapter 1 Intr oducing the TV Chapter 1 Introducing the TV Multiple Audio/Video Inputs and Outputs for Easy , User-Friendly Connections ▪ 1 composite VIDEO input terminal ▪ 1 component Video input terminal ▪ 1 VGA and VGA Audio input terminal ▪ 1 HDMI input terminal (with built-in Audio) ▪ 1 Audio(L/R) input terminal for S-VIDEO ▪ 1 C ...
-
Element Electronics Flat Panel Television - page 8
ENGLISH 7 Chapter 1 Intr oducing the TV TV Make sure all of the following contents are included. Power Cord Package Contents Remote Control/ AAA Batteries x 2 User ’ s Manual Quick Start Guide W arranty Card AC-DC Adapter The photos of the accessories are for reference only , the color of the remote control, the type o ...
-
Element Electronics Flat Panel Television - page 9
8 Chapter 1 Intr oducing the TV Setting Up Y our TV Follow the instructions below to install the TV stand: Open the box, and make sure all necessary parts are in the box. The package contains: How to install the TV Stand Cover an even and stable surface with a soft cloth. Place the TV unit face-down on the cloth. Fit the stand onto the bott ...
-
Element Electronics Flat Panel Television - page 10
If you prefer to mount your new TV on a wall instead of attaching it to the stand, please reference the instructions included in the wall mounting kit (sold separately). Afx the VESA standard mount to the back of the TV using the four screws provided in the wall-mount kit. When installing the TV on the wall, allow some space between the TV a ...
-
Element Electronics Flat Panel Television - page 11
10 Chapter 1 Intr oducing the TV How to setup the TV Do not use caustic cleaner s (porcelain, stainless steel, toilet, or ov en cleaner etc .) on the remote , as it may cause damag e . Use a supplied antenna cable to connect the VHF/UHF signal to the TV’ s ANT . terminal (refer to page14-18). Connect the AC power cord to the back of the T ...
-
Element Electronics Flat Panel Television - page 12
ENGLISH 11 Chapter 1 Intr oducing the TV Y our TV Front/Left /Right Side View and Controls MENU Press once to display the OSD (on screen display), press again to turn the OSD off. VOL+- Adjusts the volume up and down. Selects the main menu item and change values for items when in the OSD mode. T urns the TV on and into standby mode. CH ▲▼ Scans ...
-
Element Electronics Flat Panel Television - page 13
Rear View and Jacks CABlE/AIR 12 Chapter 1 Intr oducing the TV HDMI IN Connects the all digital A V equipment with HDMI connector . DC IN Connect the power cord to the AC-DC adapter and wall outlet. VG A IN/AUDIO IN Connects the PC, or other A V equipment with VGA and line in jacks. VHF/UHF IN Connects RF input from VHF/UHF antenna or cable to rece ...
-
Element Electronics Flat Panel Television - page 14
ENGLISH 13 Chapter 1 Intr oducing the TV POWER P .MODE S.MODE CAPTION MTS SLEEP P .SIZE 1 2 3 4 5 6 7 8 9 JUMP 0 VOL. CH. MUTE INPUT OK GUIDE EXIT INFO LIST FA V.CH TIMER FREEZE MENU Y our Remote Control 3 9 2 1 8 12 T urns the TV on and off. MT S Cycles through the multi-channels TV sound (MTS) options: SAP/MONO/ STEREO S.M ODE Selects sound effec ...
-
Element Electronics Flat Panel Television - page 15
14 Chapter 2 Installing the TV Ef f ective rang e: The r emote can control the TV fr om up to 197 inch a way , if pointed directly a t the receiv er . POWER P .MODE S.MODE CAPTION MTS SLEEP P .SIZE 1 2 3 4 5 6 7 8 9 JUMP 0 VOL. CH. MUTE INPUT OK GUIDE EXIT INFO LIST FA V.CH TIMER FREEZE MENU 13 14 15 16 17 18 19 20 21 22 23 GUI DE Displays the Prog ...
-
Element Electronics Flat Panel Television - page 16
ENGLISH 15 Chapter 2 Installing the TV Chapter 2 Installing the TV Refer to the owner ’ s manual of any external equipment to be connected. When connecting any external equipment, do not connect any AC power cords to wall outlets until all other connections are completed. Antenna Connection The antenna requirements for good color TV reception are ...
-
Element Electronics Flat Panel Television - page 17
O UT I N 300-ohm twin- lead cable 300-ohm twin- lead cable 75-ohm coaxial cable UHF Antenna VHF Antenna Combiner (not included) A . Co mbin ati on VHF/U HF ant enn a 300-ohm twin- lead cable 75-ohm coaxial cable VHF/UHF Antenna VHF/UHF Antenna 300/75-ohm adapter (not included) B. Se para te VHF a nd/o r UHF a nten nas Use one of the following two d ...
-
Element Electronics Flat Panel Television - page 18
ENGLISH 17 Chapter 2 Installing the TV This reminder is provided to call the CA TV system installer ’s attention to Article 820-40 of the National Electrical Code (NEC) that provides guidelines for proper grounding and, in particular , species that the cable ground shall be connected to the grounding system of the building accurately , or as c ...
-
Element Electronics Flat Panel Television - page 19
18 Chapter 2 Installing the TV Use a supplied antenna cable to connect the TV signal to the TV’ s TV CABLE terminal. Connect the DC plug of the AC-DC adapter to the DC 12V port at the back of the TV . Connect the AC-DC adapter and its power cord. Connect the power cord to wall outlet. VHF/UHF IN Press the button on the remote to t ...
-
Element Electronics Flat Panel Television - page 20
ENGLISH 19 Chapter 2 Installing the TV Press the M ENU button on the remote control to display the Main menu, and use the ◄ ► buttons to select T V . The Channel Scan will cr eate a list of r eceivable c hannels for the curr ent input (antenna or cable). Y ou will be requir ed to run a Channel Scan for eac h RF input to crea te a list of av ...
-
Element Electronics Flat Panel Television - page 21
CABlE/AIR 20 Chapter 2 Installing the TV Connecting an A/V Device with Composite Connector Rear of TV AUDIO Cable A V Cable L R VIDEO OUT Use a composite cable to connect the external A/V device’ s composite audio/video jacks to the TV’ s VIDEO IN jacks. Connect all AC power sources, before turning on the power switch of the TV or other ...
-
Element Electronics Flat Panel Television - page 22
CABlE/AIR ENGLISH 21 Chapter 2 Installing the TV Rear of TV GAME CONSOLE D VD P L AY ER Connecting an A/V Device with Component(YPbPr) Connector Pr Cr Pb Cb COMPONENT Cable Use a component cable to connect the external A/V device’ s component output jacks to the TV’s YPbPr IN input jacks. Use an audio cable to connect the external A/V devic ...
-
Element Electronics Flat Panel Television - page 23
CABlE/AIR 22 Chapter 2 Installing the TV Rear of TV Use a HDMI cable to connect the A V equipment’s HDMI output jack to the TV’s HDMI IN jacks. Connect all AC power sources, before turning on the power switch of the TV or other connected equipment. Press the button on the remote to turn on the TV . Pre ss t he Inp ut button on t ...
-
Element Electronics Flat Panel Television - page 24
CABlE/AIR ENGLISH 23 Chapter 2 Installing the TV Rear of TV Use a HDMI-to-DVI cable to connect the A V equipment’s DVI output jack to the TV’s HDMI IN jacks. Use an audio cable to connect the A V equipment’s audio output jacks to TV’s HDMI AUDIO jacks. Connect all AC power sources, before turning on the power switch of the TV or oth ...
-
Element Electronics Flat Panel Television - page 25
CABlE/AIR 24 Chapter 2 Installing the TV Use a VGA cable to connect the PC’s VGA output jack to the TV’s VGA input jack. Use an audio cable to connect the PC’s audio output jacks to the TV . Connect all AC power sources, before turning on the power switch of the TV or other connected equipment. Press the button on the remote to tu ...
-
Element Electronics Flat Panel Television - page 26
ENGLISH 25 Chapter 2 Installing the TV Audio Receiver Use an audio cable to connect the audio receiver ’ s audio LINE IN jacks to TV’s COAXIAL OUT jacks. Connect all AC power sources, before turning on the power switch of the TV or other connected equipment. Press the button on the remote to turn on the TV . Connecting an Audio Rece ...
-
Element Electronics Flat Panel Television - page 27
26 Chapter 3 Using the TV Chapter 3 USING THE FEA TURES Wide Screen function allows viewing of 4:3/16:9 images in wide screen mode, cycling through the following wide screen settings. Press the P-Size button repeatedly to select the screen format you want. Wide Screen V iewing WIDE Stretches the image vertically and horizontally to ll the sc ...
-
Element Electronics Flat Panel Television - page 28
ENGLISH 27 Chapter 3 Using the TV The Program Guide feature brings all sorts of information to your screen, such as program title, program duration, time remaining, rating information, closed caption, availability , etc. With the TV connected to a television programming source, p re ss th e IN PUT button on t he re mo te , the n us in g th e ? ...
-
Element Electronics Flat Panel Television - page 29
28 Chapter 3 Using the TV Press the button to turn the TV on. Press the ME NU button on the remote control, the on-screen menu will appear on the screen. Use the ◄ ► buttons to select your main menu option. VIDEO MENU: A UDIO MENU: Operating the Menu ▪ If the signal source is VIDEO/YPbPr/HDMI/VGA, the AUDIO MENU appears as: ▪ If the ...
-
Element Electronics Flat Panel Television - page 30
ENGLISH 29 Chapter 3 Using the TV Use the ▲▼ buttons to highlight the option of the sub-menu, and press the OK button. While in adjustment mode, and use the ◄ ► buttons to change the value of the item. Press the EXIT button to exit the menu. SETUP MENU: Allows you to set up a variety of features: Language, Closed Caption, factory re ...
-
Element Electronics Flat Panel Television - page 31
30 Chapter 3 Using the TV Press the button to turn the TV on. Press the ME NU button on the remote control to display the Main menu, and use the ◄ ► buttons to select VI DEO . Use the ▲▼ buttons to highlight an individual VIDEO option, use the ◄► buttons to change the setting, and press the ME NU button to exit the menu. ...
-
Element Electronics Flat Panel Television - page 32
ENGLISH 31 Chapter 3 Using the TV Color tempera ture Adjusts color components independently to achieve a warm or cool effect: Cool/Natural/W arm/User ▪ Warm: Increases red tint ▪ Na ture: Increases green tint ▪ Cool : Increases blue tint ▪ User : Allows the user to adjust red, green and blue color component levels independently . Noise Redu ...
-
Element Electronics Flat Panel Television - page 33
32 Chapter 3 Using the TV Press the button to turn the TV on. Press the ME NU button on the remote control to display the Main menu, and use the ◄ ► buttons to select AUDIO . Use the ▲▼ buttons to highlight an individual AUDIO option, use the ◄► buttons to change the setting, and press the ME NU button to exit the menu T ...
-
Element Electronics Flat Panel Television - page 34
ENGLISH 33 Chapter 3 Using the TV MTS Allows you to listen to high-delity stereo sound while watching TV ▪ Stereo : Use separate audio tracks for left and right speakers, if available ▪ SAP: Y ou can enjoy a second audio program from the speakers while watching a scene in the original program ▪ Mono: Allows mono output (useful when stereo ...
-
Element Electronics Flat Panel Television - page 35
34 Chapter 3 Using the TV Press the button to turn the TV on. Press the ME NU button on the remote control to display the Main menu, and use the ◄ ► buttons to select T V . Use the ▲▼ buttons to highlight an individual TV option, use the ◄► buttons changes the setting, and press the ME NU button to exit the menu. The TV ...
-
Element Electronics Flat Panel Television - page 36
ENGLISH 35 Chapter 3 Using the TV Press the ▼ button to select the desired channel, and press the OK button repeatedly to select show ( ) or hide( ) F avorite List Select Fa vorite List from the TV options and press the OK button. The Favorite List menu appears: Press the ▼ button to select the desired channel, and press the ...
-
Element Electronics Flat Panel Television - page 37
36 Chapter 3 Using the TV Press the button to turn the TV on. Press the ME NU button on the remote control to display the Main menu, and use the ◄ ► buttons to select SE TU P . Use the ▲▼ buttons to highlight an individual SETUP option, use the ◄► buttons to change the setting, and press the ME NU button to exit the menu. Cu ...
-
Element Electronics Flat Panel Television - page 38
ENGLISH 37 Chapter 3 Using the TV Closed Caption Allows you to select from analog or digital closed caption modes and press the OK button. The Closed Caption list appears: Analog Closed Caption : Press the ◄ ► buttons to select the basic analog closed caption options:Off/CC1/CC2/CC3/CC4/T1/T2/T3/T4 ▪ CC1 /CC2 /CC3 /CC4: Display a printed ...
-
Element Electronics Flat Panel Television - page 39
38 Chapter 3 Using the TV Input Edit Allows you to assign a label (maximun of 8 characters) to the input source. Use the ▼ button to select the Inp ut Edi t , and press OK to display the Input Edit menu Press the ▲▼ ◄► buttons to select Input source, and press the OK button to enter editing mode. Use the ▲▼ buttons to chan ...
-
Element Electronics Flat Panel Television - page 40
ENGLISH 39 Chapter 3 Using the TV Press the ME NU button on the remote control to display the Main menu, and use the ◄ ► buttons to select SE TU P . Use the ▼ button to highlight Parental , and press the OK button. Using the Program Block Settings T o use the Parental function, you must enter a four-digit password. The factory pas ...
-
Element Electronics Flat Panel Television - page 41
40 Chapter 3 Using the TV The P arental bloc k menu includes the following options: U .S. TV Ra tings Select to activate the TV Rating programs. U .S. Movie R atings Select to activate the MP AA Rating programs Canadian English Ra tings Select to activate the English Rating programs of Canada. Canadian Fr ench Ra tings Select to activate the Fr ...
-
Element Electronics Flat Panel Television - page 42
ENGLISH 41 Chapter 3 Using the TV CONTENT -BASED FV D L S V AGE-B ASED TV -Y TV -Y7 TV -G TV -PG TV -14 TV -MA : T o block programs by both content and age. The U.S . T V Rat ing has 2 r ating me thods: C ontent- Ba sed Rat ing and A ge- Bas ed Rati ng. The U.S. T V Rati ng includes the following ...
-
Element Electronics Flat Panel Television - page 43
42 Chapter 3 Using the TV The Canadian Englsh Ratings includes the following options: RATING D ESCRI PTI ON G All children C 8+ Children 8 years and older G General programming PG Parental guidance 14+ Viewers 14 and older 18+ Adult programming Canadian English Ratings Use the ◄► ▲ ▼ buttons to select the rating you want and press the OK bu ...
-
Element Electronics Flat Panel Television - page 44
ENGLISH ENGLISH ENGLISH 43 Specifications The U.S. Movie Ratings is used for original movies rated by the Motion Picture Association of America(MP AA) as broadcasted on cable TV and not edited for television. The U.S. Movie Ratings includes the following options: RATING D ESCRI PTI ON G General Audiences. Movie is appropriate for all ages P G Paren ...
-
Element Electronics Flat Panel Television - page 45
44 Specifications Befor e consulting service personnel, c heck the following c hart for a possible cause of the tr ouble and for a possible solution. P oor picture , sound OK Check the interface cable between TV and antenna/cable TV . Try another channel, the station may have broadcast difculties. Adjust the Brightness/Contrast optio ...
-
Element Electronics Flat Panel Television - page 46
ENGLISH ENGLISH ENGLISH 45 Specifications SPECIFICA TIONS MODEL ELETT241 Panel Panel Size 23.6” TFT Brightness 250 Contrast Ratio 1000:1 Max. Resolution 1920x1080 Input Connector C-VIDEO 1 YPbPr 1 AUDIO IN(L/R) 2 VGA 1 HDMI 1 VGA LINE IN 1 COAXIAL OUT 1 EARPHONE 1 VHF/UHF IN 1 Speakers 3Wx2 AC power adapter 100~240V AC, 50/60HZ TV Input 12V DC, 5 ...
-
Element Electronics Flat Panel Television - page 47
46 Specifications DISPLA Y MODE The screen resolution has been optimized during manufacture for the display modes listed below . If the signal from the system equals the standard signal mode, the screen is adjusted automatically . If the signal from the system does not equal the standard signal mode, adjusting the screen resolution by referring to ...
Do you have a question concerning Element Electronics Flat Panel Television?
Use the form below
If you did not solve your problem by using a manual Element Electronics Flat Panel Television, ask a question using the form below. If a user had a similar problem with Element Electronics Flat Panel Television it is likely that he will want to share the way to solve it.