English dropdown-ico

Manual D-Link DWL-2200AP

84 pages 7.13 mb
Download

Go to site of 84

Summary
  • D-Link DWL-2200AP - page 1

    1 ...

  • D-Link DWL-2200AP - page 2

    2 T able of Contents Product Contents .................................................................................. 3 Minimum System Requirements........................................................... 3 Introduction ........................................................................................... 4 Features and Benets ........ ...

  • D-Link DWL-2200AP - page 3

    3 Minimum System Requirements Note: Using a power supply with a different voltage than the one included with the DWL-2200AP will cause damage and void the warranty for this product. If any of the above items are missing, please contact your reseller .  Computers with Windows ® , Macintosh ® , or Linux-based operating systems with an installed ...

  • D-Link DWL-2200AP - page 4

    4 At up to ftee n times the speed of previo us wireless devices (maximum wi r el e ss si g na l ra te of up to 10 8 Mb p s* in Su pe r G mo d e) , y o u c an work faster and more efciently , increasing productivity . With the DWL-2200AP , bandwidth-intensive applicat ions like graphics or multimedia will benefit significantly because large fi ...

  • D-Link DWL-2200AP - page 5

    5 802.1x: Authentication which is a first line of defense against intrusion. In the authentication process, the Authentication Server veries the identity of the client attempting to connect to the network. Unfamiliar clients would be denied access. EAP (Extensible Authentication Protocol) is avail abl e thr ough the Windows ® XP operating syste ...

  • D-Link DWL-2200AP - page 6

    6  3 Different Operation modes - Capable of operating in one of three different operation modes to meet your wireless networking requirements: Access Point; WDS with AP , or WDS.  Easy Installation with PoE (Power over Ethernet).  Faster wireless networking with the 802.1 1g standard to provide a maximum wireless signal rate of up to 54Mbp ...

  • D-Link DWL-2200AP - page 7

    7 Wireless Basics D-Link wireless products are based on industr y standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, b usiness or pub lic access wireless networks. D-Link wireless products will allow y ou access to the data you w ant, when and where y ou w ant it. Y ou will be able to enjo y the freed ...

  • D-Link DWL-2200AP - page 8

    8 Standards-Based T echnology The DWL-2200AP Managed Wireless Access Point utilizes the 802.1 1b and the 802.1 1g standards. The IEEE 802.1 1g standard is an extension of the 802.1 1b standard. It in crea ses th e ma xim um wire les s s igna l r ate of up to 54Mb ps* (m axim um wireless signal rate of up to 108Mbps* in Super G mode) within the 2.4G ...

  • D-Link DWL-2200AP - page 9

    9 T h e D - L i n k D W L - 2 2 0 0 A P l e t s y o u a c c e s s y o u r n e t w o r k , u s i n g a wireless connection, from virtually anywhere within its operating range. Keep in mind, however , that the number , thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. T ypica ...

  • D-Link DWL-2200AP - page 10

    10 Operational Modes ...

  • D-Link DWL-2200AP - page 11

    1 1 Getting Started Consult with your Cable or DSL provider for proper installation of the modem. Connect the Cable or DSL modem to a Router . (See the printed Quick Installation Guide included with your router .) If you are connecting a desktop computer to your network, install the D-Link DWL-G550 wireless PCI adapter into an available PCI slot on ...

  • D-Link DWL-2200AP - page 12

    12 Connecting PoE (Power over Ethernet) Connect one end of an Ethernet cable (included with your pack- age) to the LAN port on the DWL-2200AP and the other end of the Ethernet cable to the port labeled P+DA T A OUT on the PoE base unit. Connect another Ethernet cable from the DA T A IN port on the PoE base unit to your router/sw itch, usin g a str ...

  • D-Link DWL-2200AP - page 13

    13         Note: if you have changed the default IP address assigned to the DWL-2200AP , make sure to enter the correct IP address. Using the Conguration Menu Home > Wizard The Home>Wizard screen will appear . P l e a s e r e f e r t o t h e Quick Installation Guide for more infor- mation reg ...

  • D-Link DWL-2200AP - page 14

    14 Using the Conguration Menu (continued) Home > Wireless > AP Mode Channel- All devices on the network must share the . Wireless Band- IEEE 802.1 1g. Mode- Access Point is selected from the pull down menu.. SSID Broadcast- Enable or Disable SSID Broadcast. Enabling this feature broadcasts the SSID across the network. Auto Channel Scan- Se ...

  • D-Link DWL-2200AP - page 15

    15 Using the Conguration Menu (continued) Home > Wireless> AP Mode(continued) Authentication : Open System Shared Key Open System/Shared Key WPA-EAP WPA-PSK WPA2-EAP WPA2-PSK WPA-Auto-EAP WPA-Auto-PSK Select Open System to communicate the key across the network. Select Shared Key to limit communication to only those devices that share the ...

  • D-Link DWL-2200AP - page 16

    16 Cipher T ype: Group Key Update Interval: Select AES , AUTO or TKIP from the pull down menu. Select the interval during which the group key will be valid. 1800 is the recommended value. A lower interval may reduce data transfer rate. Radius Server: Enter the IP address of the Radius server . Radius Port: Enter the Radius port. Radius Secret: Ente ...

  • D-Link DWL-2200AP - page 17

    17 Cipher T ype: Group Key Update Interval: Select the interval during which the group key wll be valid. The default value of 1800 is recommended. Select AES , AUTO or TKIP from the pull down menu. PassPhrase: Enter a PassPhrase in the corresponding eld. Home>Wireless>AP Mode>WP A-PSK, WP A2-PSK, WP A-Auto-PSK Using the Conguration M ...

  • D-Link DWL-2200AP - page 18

    18 Using the Conguration Menu (continued) Home > Wireless > WDS with AP Mode Channel- 6 is the default channel. All devices on the network must share the same channel. Wireless Band- IEEE 802.1 1g. Mode- WDS with AP mode is selected from the pull-down menu. SSID Broadcast- Enable or Disable SSID Broadcast. Enabling this feature broadcasts ...

  • D-Link DWL-2200AP - page 19

    19 Using the Conguration Menu (continued) Home > Wireless> WDS with AP Mode(continued) Enter the MAC address of the APs in your network that will serve as bridges to wirelessly connect multiple networks. Remote AP MAC Address- Authentication : Open System Shared Key Open System/Shared Key WPA-PSK WPA2-PSK WPA-Auto-PSK Select Open System to ...

  • D-Link DWL-2200AP - page 20

    20 Using the Conguration Menu (continued) Home > Wireless >WDS Mode Channel- 6 is the default channel. All devices on the network must share the same channel. Wireless Band- IEEE 802.1 1g. Mode WDS is selected from the pull-down menu. SSID Broadcast- Enable or Disable SSID Broadcast. Enabling this feature broadcasts the SSID across the net ...

  • D-Link DWL-2200AP - page 21

    21 Using the Conguration Menu (continued) Home > Wireless>WDS Mode(continued) R em ot e A P M a c A dd re ss - Enter the MAC address of the APs in your network that will serve as bridges to wirelessly connect multiple networks. Enter a PassPhrase in the corresponding eld. Encryption: Key T ype*: Key Size: V alid Key: First through Fourt ...

  • D-Link DWL-2200AP - page 22

    22 Using the Conguration Menu (continued) Home > LAN LAN is short for Local Area Network. This is considered your internal network. These are the IP settings of the LAN interface for the DWL-2200AP . These settings may be referred to as private settings. Y ou may change the LAN IP address if needed. The LAN IP address is private to your inter ...

  • D-Link DWL-2200AP - page 23

    23 Using the Conguration Menu (continued) Advanced > Performance T ransmit Power- Choose full, half (-3dB), quarter (-6dB), eighth (-9dB), minimum power . Fragment Length- Th e f ra gm en ta t io n th re sh ol d, w hi ch i s s p ec i ed i n by te s, d et er mi ne s w he th er pa c ke ts wi ll be f ra g me nt ed . Pa c ke t s ex ce e di ng ...

  • D-Link DWL-2200AP - page 24

    24 Advanced > Filters > Wireless Access Settings Access Control- Se le ct D is ab le d to d is ab le t he  lt er s f un ct io n. Se le ct Ac ce pt to ac c ep t on ly th os e de vi ce s w it h MA C ad dr es se s in t he Ac ce ss C on t ro l Li st . Se le ct Re je ct to r ej ec t th e de vi ce s wi th MA C ad dr es se s in t he Ac ce ss C on ...

  • D-Link DWL-2200AP - page 25

    25 Using the Conguration Menu (continued) Advanced > Filters > WLAN Partition Wireless Band - Enabling this feature allows wireless clients to communicate with each other . If this feature is disabled, wireless stations of the selected band are not allowed to exchange data through the access point. Enabling this feature allows Ethernet dev ...

  • D-Link DWL-2200AP - page 26

    26 Using the Conguration Menu (continued) Advanced > Grouping The D-Link DWL-2200AP allows you to balance the distribution of wireless client connections across multiple access points. Using load balancing, you can prevent scenarios where a single access point in your network shows performance degradation because it is handling a disproportio ...

  • D-Link DWL-2200AP - page 27

    27 Enter the subnet mask. Using the Conguration Menu (continued) Input the first IP address available for assignment in your network. DHCP Server Control- IP Assigned From- The Range of Pool (1-255)- SubMask- Enter the IP address of the router on the network. Gateway- Enable or Di sab le the DH CP function here. W in do w s In te rn et Na mi ng ...

  • D-Link DWL-2200AP - page 28

    28 Using the Conguration Menu (continued) Advanced > DHCP Server > Static Pool Settings* DHCP Server Control- Enable or Di sab le the DH CP function here. Static P ool Settings Assigned lP- Enter the static IP address of the device here. Assigned MAC Address- Enter the MAC address of the device here. SubMask- Enter the subnet mask here. Ga ...

  • D-Link DWL-2200AP - page 29

    29 Using the Conguration Menu (continued) Advanced > DHCP Server > Current IP Mapping List Current DHCP Dynamic Pools- Binding MAC address- Assigned IP address- Lease Time- Current DHCP Static Pools- These are IP address pools to which the DHCP server function has assigned static IP addresses. Binding MAC address- Assigned IP address- T hi ...

  • D-Link DWL-2200AP - page 30

    30 If you want to configure the Guest and Inter nal networ ks on Vir tual LAN (VLANs), the s witch and DHCP ser ver you are using must supppor t VLANs. As a prerequisite step, configure a por t on the s witch for handling VLAN tagged pack ets as described in the IEEE802.1Q standard. Using the Conguration Menu (continued) Advanced > Multi-SS ...

  • D-Link DWL-2200AP - page 31

    31 Using the Conguration Menu (continued) Advanced > Multi-SSID(continued) Index- The Pri mary SSID and Secu rity cann ot b e ch anged her e.Th ose v alue s fol low the s etti ng in Hom e>Wir eles s. SSID- Wh en y ou E n ab le M ul ti -S SI D y ou c an n am e ea ch Mu lt i- SS ID . Key T ype- Key Size- Key- VLAN Group ID- Select HEX or ASC ...

  • D-Link DWL-2200AP - page 32

    32 Using the Conguration Menu (continued) T ools > Admin Enter a user name; admin is the default setting. User Name- T o change your password, enter your old password here Old Password- Enter your new password here. New Password- Enter your new password again. Conrm New Password- Enter a user name; admin is the default setting. User Name- ...

  • D-Link DWL-2200AP - page 33

    33 Using the Conguration Menu (continued) T ools > System T ools > Firmware Click Restart t o apply the system sett ings and resta rt the DWL-2200AP . Apply Settings and Restart- C l i c k Restore t o return the DW L-2 200 AP to it s factory default settings. R es to re t o Factory Default S et ti ng s- Af te r yo u ha ve do wn lo ad ed t ...

  • D-Link DWL-2200AP - page 34

    34 Using the Conguration Menu (continued) T ools > Cfg File B ro ws e fo r th e co n gu ra ti on settings that you h av e s av ed to yo ur h ar d dr iv e. C li ck OK when you made yo ur s el ec ti on . Update File- Click O K to load the selected settings. Loa d Sett ings to the Local Hard Drive- ...

  • D-Link DWL-2200AP - page 35

    35 Using the Conguration Menu (continued) Status > Device Info This window displays the settings of the DWL-2200AP , as well as the Firmware version and the MAC address. ...

  • D-Link DWL-2200AP - page 36

    36 Using the Conguration Menu (continued) Status > Stats This window displays the statistics of the wireless local area network. ...

  • D-Link DWL-2200AP - page 37

    37 Using the Conguration Menu (continued) Status > Client Info Client Information Se le ct t hi s op ti on t o o bt in e in fo ma ti on o n wi re le ss c li en ts .( A c li en t is a de vi ce o n th e ne tw or k th at i s co mm un ic a ti ng w it h th e DW L- 22 00 AP ) ...

  • D-Link DWL-2200AP - page 38

    38 Using the Conguration Menu (continued) Status > Log The log information will include, but not limited to, the following items: • Upgrade Firmware • Client associate and disassociate with AP • Web loginIf you require If you require more space to hold your logs, please provide the IP address of the Server that will store your logs. The ...

  • D-Link DWL-2200AP - page 39

    39 Using the Conguration Menu (continued) Help At this window you can access the help screens for the topics listed. ...

  • D-Link DWL-2200AP - page 40

    40 Using the AP Manager Discovering Devices The AP Manager is a convenient tool to manage the conguration of your network from a central computer . With AP Manager there is no need to congure devices individually . Click on this button to discover the devices available on the network. T o launch the AP Manager : • Go to the Start Menu • S ...

  • D-Link DWL-2200AP - page 41

    41 Using the AP Manager (continued) Y ou can assign an IP address to an AP or assign IP addresses to multiple AP’s by clicking on this button after selecting the device(s). IP Conguration Select the AP that you want to assign an IP address to and click the IP button. Enter the IP address and IP netmask for the selected device and click OK. Y o ...

  • D-Link DWL-2200AP - page 42

    42 Using the AP Manager (continued) Device Conguration Click on thi s button to acce ss the congu ration properties of the selected device(s). The device conguration window allows you to congure settings but does not actually apply the settings to the device unless you click the Apply button. Y ou can also save and load conguration ? ...

  • D-Link DWL-2200AP - page 43

    43 D ev ic e Co n gu ra ti on >G en er al Wh en s el ec ti ng m ul ti pl e de vi ce s fo r co n g ur at io n, s om e op ti on s ar e un av ai la bl e fo r co n gu ra ti on a s no te d( *) b el ow : • D e vi ce N am e( *) : Th is a l lo ws y ou t o ch an g e th e de vi ce n am e fo r th e s el ec te d a cc es s po in t. Y o u mu st p l ...

  • D-Link DWL-2200AP - page 44

    44 Device Conguration>General (continued) Using the AP Manager (continued) • T elnet Support : This pulldown selection enables or disables the ability to T elnet into the selected device(s). T elnet T imeout : This pulldown selection defines the timeout period during a T elnet session with the selected device(s). Console Protcol : Choose No ...

  • D-Link DWL-2200AP - page 45

    45 Dev ice Con gur ati on>W ire less • S S I D : The Service Set (network) Ide nti er of you r wir eles s net work . • C h a n n e l : A l l o w s y o u t o s e l e c t a cha nnel . 6 i s th e def ault sett ing. • SS ID B ro ad ca st : All ow s you to en ab le or disable the broadcasting of the SSI D to netw ork clien ts. • S u p e ...

  • D-Link DWL-2200AP - page 46

    46 The Security tab contain s the WEP congura tion setting s on the intial page. If you select WP A as the authentica tion type, an additi onal tab will appear with the WP A congurat ion options based on your selection. • Authentication T ype : Select from the pulldown menu the type of authentication to be used on the selected device(s). ? ...

  • D-Link DWL-2200AP - page 47

    47 Using the AP Manager (continued) • Cipher T ype : Select auto, TKIP , or AES from the pulldown menu. • Group Key Update Interval : Select the interval during which the group key will be vaild. 1800 is the recommended setting. A lower interval may reduce transfer rates. • RADIUS Server : Enter the IP address of the RADIUS server . • RADIU ...

  • D-Link DWL-2200AP - page 48

    48 Using the AP Manager (continued) • Cipher T ype : Select auto, TKIP , or AES from the pulldown menu. • Group Key Update Interval : Select the interval during which the group key will be vaild. 1800 is the recommended setting. A lower interval may reduce transfer rates. • PassPhrase : Enter a PassPhrase between 8-63 characters in length . D ...

  • D-Link DWL-2200AP - page 49

    49 Device Conguration>Filters • Internal Station Connection : Enabling this allows wireless clients to communicate with each other . When this option is disabled, wireless stations are not allowed to exchange data through the access point. • Et h er ne t to WL AN Ac ce ss : Enabling this option allows Ethernet devices to communicate with ...

  • D-Link DWL-2200AP - page 50

    50 Using the AP Manager (continued) Device Conguration>AP Mode • Ac ce ss P oi nt : Th e de fa ul t se tt in g us ed t o cr ea te a w ir el es s LA N. • W DS w it h A P : Al lo ws y o u t o co n ne c t m u lt ip l e w i re l es s LA N s t o ge t he r ,w hi l e s t il l fu n ct i on in g as a n AP .I f en ab le , yo u mu st e nt e r th e M ...

  • D-Link DWL-2200AP - page 51

    51 Using the AP Manager (continued) • DH CP S er ve r : E na bl e or d is ab le t he D H CP s er ve r f un ct io n. Device Conguration>DHCP • IP As si gn ed F ro m : E nt e r th e in it ia l IP a dd re ss t o be a ss ig ne d b y th e DH CP s er ve r . • R an ge o f Po ol ( 1~ 2 55 ) : E nt er t he n u mb er o f al lo ca te d IP a dd re ...

  • D-Link DWL-2200AP - page 52

    52 Using the AP Manager (continued) Device Conguration>Client Info Client Info. Mac Address Band Authentication Signal Power Mode Se le ct t he o pt io n to o bt ai n in fo rm at io n o n wi re le ss c li en ts .( A c li en t is a de vi ce o n th e ne tw or k th at i s co mm un ic a ti ng w it h th e DW L- 22 00 AP ) Displays the MAC address ...

  • D-Link DWL-2200AP - page 53

    53 Device Conguration > Log Check this option to enable the log and the Remote Syslog Status Server IP . Select Enable to allow the logging of system actions, such as logging a rmware upgrade. Select Enable to allow the logging of any wireless clients that connect to the AP . Select Enable to allow all other information to be logged. If yo ...

  • D-Link DWL-2200AP - page 54

    54 Device Conguration > Multi-SSID The DWL-3200AP offers conguration using Multiple SSIDs, allowing for a virtually segregated station by sharing the same channel. One primary SSID can be associated with up to 7 guest SSIDs. Because guest SSIDs cannot be scanned by site survey tools, users cannot associate with guest SSIDs unless they know ...

  • D-Link DWL-2200AP - page 55

    55 Using the AP Manager (continued) Conguration Files The DWL-2200AP allows you to save the device settings to a conguration le. T o save a conguration le, follow these steps: • Select a device from the Device List on the main screen of the AP Manager . • Click the device conguration button. • Click the Save button after you ...

  • D-Link DWL-2200AP - page 56

    56 Using the AP Manager (continued) Firmware T o upgrade the rmware: • Download the latest rmware upgrade from http://support.dlink.com to an easy to nd location on your hard drive. • Click on the rmware button as shown above. • A popup window will appear . Locate the rmware upgrade le and click Open . IMPORT ANT! DO NOT DIS ...

  • D-Link DWL-2200AP - page 57

    57 Using the AP Manager (continued) This button will launch the Setup Wizard that will guide you through device conguration. Setup Wizard Click Next E nt er a Pa ss wo rd an d re ty pe i t in t he V er if y Pa ss wo rd  el d. Click Next ...

  • D-Link DWL-2200AP - page 58

    58 Setup Wizard (continued) Using the AP Manager (continued) Click Next Enter the SSID and the C ha nn el f or t he n et wo rk . If yo u w an t t o e na ble En cr yp- t io n, en te r th e En c ry pt io n va l ue s he re . Click Next ...

  • D-Link DWL-2200AP - page 59

    59 Setup Wizard (continued) Using the AP Manager (continued) The DWL-2200AP setup is complete! Click Finish ...

  • D-Link DWL-2200AP - page 60

    60 Refresh Using the AP Manager (continued) Click on this button to refresh the list of devices available on the network. About Clic k on this button to vie w the versi on of AP Manager . Dev ices with a check mark next to them are still available on the network. Devices with an X are no longer available on the network. ...

  • D-Link DWL-2200AP - page 61

    61 Using the Network Setup Wizard in Windows XP In this section you will learn how to establish a network at home or work, using Microsoft Windows XP . Note: Please refer to websites such as http://www .homenethelp.com and http://www .microsoft.com/windows2000 for information about networking computers using Windows 2000,/Me/98SE. Go to Start>Co ...

  • D-Link DWL-2200AP - page 62

    62 Please follow all the instructions in this window: Networking Basics (continued) Click Next . In the following window , select the best description of your computer . If your computer connects to the Internet through a router , select the second option as shown. Click Next . ...

  • D-Link DWL-2200AP - page 63

    63 Enter a Computer description and a Computer name (optional.) Networking Basics (continued) Click Next. Enter a Workgroup name. All computers on your network should have the same Workgroup name. Click Next. ...

  • D-Link DWL-2200AP - page 64

    64 Please wait while the Network Setup Wizard applies the changes. Networking Basics (continued) When the changes are complete, click Next . Please wait while the Network Setup Wizard congures the computer . This may take a few minutes. Format the disk if you wish, and click Next. ...

  • D-Link DWL-2200AP - page 65

    65 Networking Basics (continued) In the window below , select the option that ts your needs. In this example, Create a Network Setup Disk has been selected. Y ou will run this disk on each of the computers on your network. Click Next . Please wait while the Network Setup Wizard copies the les. Click Next . Insert a disk into the Floppy Disk D ...

  • D-Link DWL-2200AP - page 66

    66 Networking Basics (continued) Please read the information under Here’s how in the screen below . After you complete the Network Setup W izard you will use the Network Setup Disk to run the Network Setup Wizard once on each of the computers on your network. Click Next. ...

  • D-Link DWL-2200AP - page 67

    67 Networking Basics (continued) Please read the information on this screen, then click Finish to complete the Network Setup Wizard . The new settings will take effect when you restart the computer . Click Y es to restart the computer . Y ou have completed conguring this computer . Next, you will need to run the Network Setup Disk on all the oth ...

  • D-Link DWL-2200AP - page 68

    68 Networking Basics (continued) Naming your Computer T o name your computer using Windows XP , please follow these directions: Click Start (in the lower left corner of the screen). Right-click on My Computer . Select Properties .            Select the Computer Name T ab in the System Properties window . ...

  • D-Link DWL-2200AP - page 69

    69 Networking Basics (continued) Naming your Computer   In this window , enter the Computer name . Select Workgroup and enter the name of the Workgroup . All computers on your network must have the same Workgroup name. Click OK .        Checking the IP Address in Windows XP The adapter -equipp ed compu ters in your ...

  • D-Link DWL-2200AP - page 70

    70 Networking Basics (continued) Checking the IP Address in Windows XP This window will appear . Cl ic k th e S up po rt ta b . Click Close .     Assigning a Static IP Address in Windows XP/2000 Note: DHCP-capable routers will automatically assign IP addresses to the computers on the network, using DHCP (Dynamic Host Conguration Prot ...

  • D-Link DWL-2200AP - page 71

    71 Click on Internet Protocol (TCP/IP) Click Properties    Select Use the following IP address in the Internet Protocol (TCP/IP) Properties window (shown below) Networking Basics (continued) Assigning a Static IP Address in Windows XP/2000    Double-click on Network Connections .      Double-click on Properties . ...

  • D-Link DWL-2200AP - page 72

    72 Input your IP address and subnet mask. (The IP addresses on your network must be within the same range. For example, if one computer has an IP address of 192.168.0.2, the other computers should have IP addresses that are sequential, like 192.168.0.3 and 192.168.0.4. The subnet mask must be the same for all the computers on the network.) Networki ...

  • D-Link DWL-2200AP - page 73

    73 Networking Basics (continued) Assigning a Static IP Address with Macintosh OSX              G o t o t h e A p p l e M e n u and select System Prefer- ences . Select Built-in Ethernet in the Show pull-down menu. Se lec t M an ua ll y in t he Co n gu re p ul l- do wn m en u. I np ut the Stati c IP Ad ...

  • D-Link DWL-2200AP - page 74

    74 Networking Basics (continued) Selecting a Dynamic IP Address with Macintosh OSX Go to th e Ap pl e M en u an d se le ct Sy st em P re fe re nc es . Click on Network . Select Built-in Ethernet in the Show pull-down menu. Select U s i n g D H C P i n t h e Congure pull-down menu. Click Apply Now . The IP Address, Subnet mask , and the Router ? ...

  • D-Link DWL-2200AP - page 75

    75 Networking Basics (continued) C he c ki ng t he Wi re l es s C o nn e ct io n by Pi n gi n g i n Wi nd ow s X P/ 20 0 0 Checking the Wireless Connection by Pinging in W indows Me/98 Go to Start > Run > type cmd . A window similar to this one will appear . T ype ping xxx.xxx.xxx. xxx , where xxx is the IP address of the wireless router or a ...

  • D-Link DWL-2200AP - page 76

    76 1. Th e co mpu te r u se d t o con g ure t he D WL - 22 0 0A P ca nn ot ac ces s th e con g ura ti on me nu. Ch ec k th at t he E th er ne t LE D on t he D WL - 22 00 AP i s O N . I f th e LE D is n ot O N , c he ck t ha t th e ca bl e fo r th e E th er ne t co nn ec ti on i s se cu re ly in se rt ed . Ch ec k th at t he E th er ne t ad ap ...

  • D-Link DWL-2200AP - page 77

    77 T roubleshooting (continued) • Go to Start • Right-click on My Computer • Click Properties Make sure the wireless client is associated and joined with the correct access point. T o check this connection: Right-click on the local area connection icon in the taskbar> select View A vailable Wireless Networks . The Connect to Wireles s Netw ...

  • D-Link DWL-2200AP - page 78

    78 T roubleshooting (continued) Click Device Manager .    Select the Hardware T ab.       Go to Start > My Computer > Properties. Check to make sure that the router in your network is functioning properly by pinging it. If the router is not functioning properly , it will not connect to the Internet. If you need to ? ...

  • D-Link DWL-2200AP - page 79

    79 T roubleshooting (continued)                Double-click on Net- work Adapters. Right-click on D-Link Air Plus DWL-G650 W i r e l e s s C a r d b u s Adapter (In this example we use the DWL-G650; you may be using other network adapters, but the procedure will remain the same.) Select Properties t o ch ...

  • D-Link DWL-2200AP - page 80

    80 T roubleshooting (continued) 5. Why does my wireless connection keep dropping? An te nn a Or ie nt at io n- T ry d if fe re nt an te nn a or ie nt at io ns fo r th e DW L- 22 00 AP . T ry to ke ep t he a nt en na a t le as t 6 in ch es a wa y f ro m th e wa ll o r ot he r ob j ec ts .    If y ou a re u si ng 2 .4 GH z co rd l es s ph on ...

  • D-Link DWL-2200AP - page 81

    81 T roubleshooting (continued) 6. Why can’t I get a wireless connection? (continued) T urn off your DWL-220 0AP and the clien t. T urn the DWL-220 0AP back on again , and then turn on the client.   Check that the LED indicators are indicating normal activity . If not, check that the AC power and Ethernet cables are rmly connected.  ? ...

  • D-Link DWL-2200AP - page 82

    82 T echnical Specications Standards • IEEE 802.1 1b • IEEE 802.1 1g • IEEE 802.3 • IEEE 802.3u • IEEE 802.3x • IEEE 802.3af Device Management • Web-B ased – Internet Explorer v6 or later; Netscap e Navigator ™ v7 or later; or other Java-enabled browsers. • T elnet • AP Manager • SNMP v .3 Data Rates* For 802.1 1g: • 10 ...

  • D-Link DWL-2200AP - page 83

    83 Operating V oltage • 48VDC +/- 10% for PoE Radio and Modulation T ype For 802.1 1b: DSSS: • DBPSK @ 1Mbps • DQPSK @ 2Mbps • CCK @ 5.5 and 1 1Mbps For 802.1 1g: OFDM: • BPSK @ 6 and 9Mbps • QPSK @ 12 and 18Mbps • 16QAM @ 24 and 36Mbps • 64QAM @ 48 and 54Mbps DSSS: • DBPSK @ 1Mbps • DQPSK @ 2Mbps • CCK @ 5.5 and 1 1Mbps T ran ...

  • D-Link DWL-2200AP - page 84

    84 T echnical Support Y ou can nd software updates and user documentation on the D-Link websites. If you require product support, we encourage you to browse our F AQ section on the Web Site before contacting the Support line. W e have many F AQ’s which we hope will provide you a speedy resolution for your problem. For Customers within The Unit ...

Manufacturer D-Link Category Network Router

Documents that we receive from a manufacturer of a D-Link DWL-2200AP can be divided into several groups. They are, among others:
- D-Link technical drawings
- DWL-2200AP manuals
- D-Link product data sheets
- information booklets
- or energy labels D-Link DWL-2200AP
All of them are important, but the most important information from the point of view of use of the device are in the user manual D-Link DWL-2200AP.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals D-Link DWL-2200AP, service manual, brief instructions and user manuals D-Link DWL-2200AP. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product D-Link DWL-2200AP.

Similar manuals

A complete manual for the device D-Link DWL-2200AP, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use D-Link DWL-2200AP by users. Manuals are usually written by a technical writer, but in a language understandable to all users of D-Link DWL-2200AP.

A complete D-Link manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual D-Link DWL-2200AP - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the D-Link DWL-2200AP, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the D-Link DWL-2200AP, that we can find in the current document
3. Tips how to use the basic functions of the device D-Link DWL-2200AP - which should help us in our first steps of using D-Link DWL-2200AP
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with D-Link DWL-2200AP
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of D-Link DWL-2200AP in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning D-Link DWL-2200AP?

Use the form below

If you did not solve your problem by using a manual D-Link DWL-2200AP, ask a question using the form below. If a user had a similar problem with D-Link DWL-2200AP it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)