English dropdown-ico

Manual Kenwood KMD-PS970R

44 pages 0.45 mb
Download

Go to site of 44

Summary
  • Kenwood KMD-PS970R - page 1

    KMD-PS970R © B64-1409-00 (E) (MC) 99/12 11 10 9 8 7 6 5 4 3 2 1 MD-RECEIVER INSTR UCTION MANU AL ...

  • Kenwood KMD-PS970R - page 2

    — 2 — English Contents Before use Safety Precautions ........................................................................3 Basic operations Power ............................................................................................6 Switching Modes ..........................................................................7 Volume ... ...

  • Kenwood KMD-PS970R - page 3

    — 3 — To prevent injury and/or fire, take the following precautions: • Insert the unit all the way until it is fully locked in place. Otherwise it may fly out of place during collisions and other jolts. • When extending the ignition, battery or ground cables, make sure to use automotive- grade cables or other cables with an area of 0.75mm 2 ...

  • Kenwood KMD-PS970R - page 4

    — 4 — English Saf ety pr ecautions • If you experience problems during installation, consult your Kenwood dealer. • If the unit fails to operate properly, press the RESET button. When the faceplate is not visible, slide the manual open switch (as illustrated on p.6) for as many times as you have preset to make the faceplate control appear. ...

  • Kenwood KMD-PS970R - page 5

    Basic operations — 5 — MENU DAB EJECT PTY SCAN RDM REP M.RDM NF DISP NAME.S DISC DISC PREOUT T I VOL ADJ LOUD System E's OFF 4V SRC ATT/LOUD MENU u d AM FM 4 ¢ D.SCN 44W 4 KMD-PS970R LOUD indicator ...

  • Kenwood KMD-PS970R - page 6

    • Whilst the control panel is moving, pressing the buttons will not have any effect. Do not try to press the buttons on the control panel as the faceplate is moving, as excessive force may damage the unit. • During the forced closing of the unit (i.e., having the unit left closed whilst ignition is turned on), the faceplate will not open no mat ...

  • Kenwood KMD-PS970R - page 7

    This function amplifies low and high tones when the volume is turned down. The LOUD indicator lights up, when the loudness function is on. Turning Loudness On/Off: Hold down the LOUD button for one second or more to switch the loudness on and off. Loudness This function allows you to turn down the volume quickly. Turning Attenuator On/Off: Press th ...

  • Kenwood KMD-PS970R - page 8

    adjustment(Bright ##) ↔ Dimmer (Dimmer ON / OFF) ↔ Switching Graphic Display(Graphic ON / OFF) ↔ Black Mask(BLK MASK OFF / ON) ↔ Dual zone system* 3 (Zone 2 OFF / ON) ↔ External Amplifier Control (AMP BASS Flat / +6 / +12) ↔ Manual Open Switch Setting (Open SW #) ↔ News Bulletin Function (NEWS OFF / ##MIN) ↔ Local seek* 4 (Local.S O ...

  • Kenwood KMD-PS970R - page 9

    You can choose from three tuning modes: auto seek, preset station seek, and manual. The “AUTO 1” indicator lights up when auto seek tuning is selected, and the “AUTO 2” indicator lights when preset station seek tuning is selected. Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on. ...

  • Kenwood KMD-PS970R - page 10

    Store the frequency of the station currently being listened to. You can then recall that station with a single touch of a button. Station Preset Memory When poor stereo reception is experienced, this function will reduce noise and improve listening conditions. Hold down the MENU button for one second or more. "MENU" is displayed and the m ...

  • Kenwood KMD-PS970R - page 11

    • When the AF function is turned on whilst auto memory entry takes place, only RDS stations (i.e., stations with RDS capability) are stored. RDS stations that have been preset for FM1 cannot also be preset in FM2 or FM3. • When the local seek function is turned whilst auto memory entry takes place, stations with poor reception are not stored. ? ...

  • Kenwood KMD-PS970R - page 12

    When the frequency of another station is too close to that of the station currently being listened to, interfering with proper reception, this function automatically narrows the range of received frequencies to prevent such interference. Kenwood intelligent Twin IF (K2I) The £ indicator lights whilst the clock is displayed. NOTE Turning clock disp ...

  • Kenwood KMD-PS970R - page 13

    When an emergency transmission (announcing disasters, etc.) is sent, all current functions are interrupted to allow the warning to be received. Alarm Stations that offer EON also transmit information about other RDS stations that have traffic information. When you are tuned to a station that is not transmitting traffic information, but another RDS ...

  • Kenwood KMD-PS970R - page 14

    You can listen to traffic information. If you are listening to tapes or discs, they will continue playing until a traffic bulletin is broadcast. Turning TI function On/Off: Press the TI button to turn the function on and off. When the function is on, the TI indicator is turned on. When none is being received, the TI indicator will blink on and off. ...

  • Kenwood KMD-PS970R - page 15

    Preset the volume level to be used for traffic information and news broadcasts. Tune into the station for which you want to set the volume. Adjust the volume to the desired level. Hold down the TI VOL ADJ button for two seconds or more. The volume level blinks once in the display to indicate that the data has been stored. Future traffic information ...

  • Kenwood KMD-PS970R - page 16

    Conduct auto seek tuning only on those stations with selected kinds of programmes. Press the 38 (PTY) button. “PTY” is displayed, and the Programme Type Selection (PTY) Mode entered. If you make no key input in 30 seconds, the mode will automatically turn off. You cannot use this function whilst the traffic information function is turned on. Ch ...

  • Kenwood KMD-PS970R - page 17

    “PTY” blinks in the display for about 30 seconds. If you make no key input in 30 seconds, the PTY selection mode will turn off automatically. If no programme can be found, "NO PTY" is displayed. If you want to select another type of programme, repeat steps 2 and 3 above. Switching to Other Stations with the Same Type of Programme: Whe ...

  • Kenwood KMD-PS970R - page 18

    • This function is only available if the desired station sends PTY- code for news bulletin or belongs to EON-Network sending PTY- code for news bulletin. • If you turn on the news bulletin function in the MW/LW band, the band is switched automatically to the FM band. However, the MW/LW band is not returned to when you turn off the function. NOT ...

  • Kenwood KMD-PS970R - page 19

    ■ When a unit equipped with an O-N switch is to be connected, please also see the instruction manual of this unit. Set the O-N switch to "N". "N"-operation will be set. ■ When a unit that is not equipped with an O-N switch, or the changer switching unit "KCA-S200" is connected, "O"- operation will be set. ...

  • Kenwood KMD-PS970R - page 20

    Switch the display that appears whilst discs are playing. Switching Display for Discs: Each time you press the DISP button, the display during disc play switches as follows. NOTE T rack time Disc name (DNPS) Disc title (Units featuring CD text/MD only) T rack title (Units featuring CD text/MD only) Switching Display for Discs Press the SRC button r ...

  • Kenwood KMD-PS970R - page 21

    Search forwards or backwards through the tracks on the disc until you reach the one that you want to listen to. Making a Reverse Track Search: Press the 4 button to display the desired track number. Press once to search back to the beginning of the current track, twice to search back to the beginning of the previous track, and so forth. Play starts ...

  • Kenwood KMD-PS970R - page 22

    Successively play the beginning of each disc on a changer until you find the one that you want to listen to. Starting the disc scan: Press the D.SCN button. "DSCN ON" is displayed and the first 10 seconds of each disc are played, in the order in which they are loaded on the changer. The disc number currently being heard blinks in the disp ...

  • Kenwood KMD-PS970R - page 23

    Play all the tracks on the current disc in random order. Press the RDM button to switch the random play function on and off. "RDM ON" is displayed when random play is turned on. The display of the track number changes continuously as the next track is being selected. When the track has been selected, play starts. The selected track number ...

  • Kenwood KMD-PS970R - page 24

    The operation and characters that can be entered may change as listed below, depending on the unit that is connected. A press of the 38 button exits the disc name preset mode. Operations can be followed again from Step 2 at a time such as this, and the characters to be input are selected using the procedure described below. Press the DISC + or DISC ...

  • Kenwood KMD-PS970R - page 25

    If you have preset the name of a disc that you want to listen to in the disc changer, you can look for it by name and start playing it. Press the DNPP button on the remote control. "DNPP" will appear in the display, and the disc name preset play mode is entered. The preset names/disc titles of the disc in the disc changer to which you are ...

  • Kenwood KMD-PS970R - page 26

    Adjust various parameters of sound quality. Press the AUD button to enter the control mode. Press either the FM or AM button. Each time the button is pressed, the adjustment mode will change as follows: Pressing the FM button advances the display, and pressing the AM button reverses it. Source tone memory Each source (MD, FM, AM, and disc changer) ...

  • Kenwood KMD-PS970R - page 27

    This function permits the graphic display to be switched to one that is linked with the volume level value or to display various modes. The initial setting is ON (displaying various modes). Turning the Graphic Display On/Off: Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on. Press the ¢ ...

  • Kenwood KMD-PS970R - page 28

    Shut down the audio system temporarily whenever an incoming call is received. The function will not work if a cable is not connected to the car phone. When the telephone rings: When a call is received, "CALL" is displayed and all the unit functions are temporarily interrupted. Restoring Original Unit Source During Phone Call: Press the SR ...

  • Kenwood KMD-PS970R - page 29

    The beep sound is not output from the preout jacks. NOTE This function produces a beep sound that accompanies button operation. It can be switched on or off. Turning the Beep On/Off: Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on. Press the ¢ button repeatedly until the Touch Sensor T ...

  • Kenwood KMD-PS970R - page 30

    If you have transmitted the Mask Key's signal once to the unit in advance, you will have to transmit it once again if the unit has been removed from the battery. This function helps prevent theft. When using the unit for the first time: In order to deactivate the demonstration mode, be sure to press the transmit button to transmit the Mask Key ...

  • Kenwood KMD-PS970R - page 31

    Press the ¢ button repeatedly until the Dual zone system function appears in the display. Press the 4 button to search in the other direction. The function setting is indicated by "Zone 2 ON" or "Zone 2 OFF" in the display, indicating that the Dual zone system function is on or off, respectively. Switching settings Press either ...

  • Kenwood KMD-PS970R - page 32

    This function allows you to turn off the lower part of the display if there is too much information in the display. Turning the Black Mask On/Off: Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on. Press the ¢ button repeatedly until the Black Mask function appears in the display. Pressi ...

  • Kenwood KMD-PS970R - page 33

    BASS +6", or "AMP BASS +12" in the display, indicating that the external amplifier bass boost level is flat, +6dB, or +12dB, respectively. Switching settings Press either the AM or FM button. The display and setting will change. Press the MENU button to end the menu mode. As of December 1998, the power amplifiers controllable by the ...

  • Kenwood KMD-PS970R - page 34

    • SRC button Each time you press the SRC button, the mode switches as follows: • The mode switches to the next mode from any mode which cannot be used. • The external disc control mode will differ depending on the unit that is connected. NOTE ▼ Tuner mode ▼ MD mode ▼ External disc control mode ▼ AUX mode Basic operations To prevent ac ...

  • Kenwood KMD-PS970R - page 35

    Press the 4 button to search through the tracks backwards. Press the ¢ button to search through the tracks forwards. • DISC buttons (for disc changers) Press the AM/DISC – button to search through the discs backwards. Press the FM/DISC + button to search through the discs forwards. • TRACK buttons MD/External disc control features • TUNE b ...

  • Kenwood KMD-PS970R - page 36

    English — 36 — The use of any accessories except for those provided might result in damage to the unit. Make sure only to use the accessories shipped with the unit, as shown above. 2 CAUTION Accessories .........1 1 L R .........1 2 .........1 3 .........1 4 External view ......... Number of items .........1 5 .........1 6 .........1 7 ........ ...

  • Kenwood KMD-PS970R - page 37

    TEL MUTE P.CONT.OUT 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 NON- FADING REAR FRONT EXT.AMP. CONT. — 37 — Connecting Cables to Terminals Front left output (White) Front right output (Red) Rear right output (Red) Rear left output (White) Connector Function Guide Pin Numbers for ISO Connectors Cable Colour Functions External Power Connector A–4 A–5 A? ...

  • Kenwood KMD-PS970R - page 38

    English — 38 — Connecting the ISO Connector (see p.37) The pin arrangement for the ISO connectors depends on the type of vehicle you drive. Make sure to make the proper connections to prevent damage to the unit. The default connection for the wiring harness is described in 1 below. If the ISO connector pins are set as described in 2 or 3 , make ...

  • Kenwood KMD-PS970R - page 39

    — 39 — Removing the hard rubber frame ■ Removing the Unit Insert the removal tool into the indentations in the hard rubber frame, and pull it gently until the lock is released. Accessory 4 Removal tool Removing the Unit ■ Make the faceplate control panel appear. When the control panel of the faceplate is hidden, the unit will be locked by t ...

  • Kenwood KMD-PS970R - page 40

    English — 40 — Attaching Steering Remote Control Attach the operation section and the light emitting section of the Steering Remote Control as shown above. Be sure to attach them to positions that can ensure proper operation. • Clean dirt and oil from the positions where the Steering Remote Control sections are to be attached. • If the atta ...

  • Kenwood KMD-PS970R - page 41

    — 41 — What might appear to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. Troubleshooting Guide SOLUTION POSSIBLE CAUSE PROBLEM A speaker cable may be pinched by a screw in the car. Check the speaker wiring. No sound can be ...

  • Kenwood KMD-PS970R - page 42

    English — 42 — Troubleshooting Guide External disc control mode SOLUTION POSSIBLE CAUSE PROBLEM The computer chip in the unit is not functioning normally. Press the reset button on the unit (see page 4). The disc control mode cannot be selected. No cable has been connected to the disc changer input terminal on the unit. Connect the cable to the ...

  • Kenwood KMD-PS970R - page 43

    — 43 — The following messages are displayed when certain problems are occurring in your system. Take the recommended actions. Nothing has been recorded on the MD. ] The next MD is automatically played back BLANK No disc magazine has been loaded in the changer. The disc magazine is not completely loaded. ] Load the disc magazine properly. No CD ...

  • Kenwood KMD-PS970R - page 44

    English — 44 — FM tuner section Frequency range (50 kHz Space) ...............87.5 MHz – 108.0 MHz Usable sensitivity (S/N=26dB) ...................................0.7 µV/75 Ω Quieting Sensitivity (S/N=46dB) .................................1.6 µV/75 Ω Frequency response (±3.0 dB) ..............................30 Hz – 15 kHz Signal t ...

Manufacturer Kenwood Category Car Stereo System

Documents that we receive from a manufacturer of a Kenwood KMD-PS970R can be divided into several groups. They are, among others:
- Kenwood technical drawings
- KMD-PS970R manuals
- Kenwood product data sheets
- information booklets
- or energy labels Kenwood KMD-PS970R
All of them are important, but the most important information from the point of view of use of the device are in the user manual Kenwood KMD-PS970R.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Kenwood KMD-PS970R, service manual, brief instructions and user manuals Kenwood KMD-PS970R. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Kenwood KMD-PS970R.

Similar manuals

A complete manual for the device Kenwood KMD-PS970R, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Kenwood KMD-PS970R by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Kenwood KMD-PS970R.

A complete Kenwood manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Kenwood KMD-PS970R - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Kenwood KMD-PS970R, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Kenwood KMD-PS970R, that we can find in the current document
3. Tips how to use the basic functions of the device Kenwood KMD-PS970R - which should help us in our first steps of using Kenwood KMD-PS970R
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Kenwood KMD-PS970R
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Kenwood KMD-PS970R in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Kenwood KMD-PS970R?

Use the form below

If you did not solve your problem by using a manual Kenwood KMD-PS970R, ask a question using the form below. If a user had a similar problem with Kenwood KMD-PS970R it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)