English dropdown-ico

Manual Hitachi G13YF

12 pages 0.64 mb
Download

Go to site of 12

Summary
  • Hitachi G13YF - page 1

    Electronic Disc Grinder Model G 12V A • G 13V A • G 13YF Handling instructions Note: Before using this Electric Power Tool, carefully read through these HANDLING INSTRUCTIONS to ensure efficient, safe operation. It is recommended that these INSTRUCTIONS be kept readily available as an important reference when using this power tool. G13VA 001Cov ...

  • Hitachi G13YF - page 2

    1 GENERAL POWER TOOL SAFETY WARNINGS WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains- operated (corded) power tool or ...

  • Hitachi G13YF - page 3

    2 PRECAUTION Keep children and infirm persons away. When not in use, tools should be stored out of reach of children and infirm persons. SAFETY WARNINGS COMMON FOR GRINDING, SANDING OR ABRASIVE CUTTING-OFF OPERATIONS a) This power tool is intended to function as a grinder, sander or cut-off tool. Read all safety warnings, instructions, illustration ...

  • Hitachi G13YF - page 4

    3 c) Do not position your body in the area where power tool will move if kickback occurs. Kickback will propel the tool in direction opposite to the wheel’s movement at the point of snagging. d) Use special care when working corners, sharp edges etc. Avoid bouncing and snagging the accessory. Corners, sharp edges or bouncing have a tendency to sn ...

  • Hitachi G13YF - page 5

    4 SPECIFICATIONS * Be sure to check the nameplate on product as it is subject to change by areas. Electronic Control The grinder has an electronic speed control which provides: 䡬 full speed at all times in the range up to rated load. 䡬 soft-start. 䡬 variable speed (EXCEPT OF G13YF) 䡬 Kickback Protection The kickback protection feature cuts ...

  • Hitachi G13YF - page 6

    5 4. Fitting and adjusting the wheel guard The wheel guard is a protective device to prevent injury should the depressed center wheel be shattered during operation. Ensure that the wheel guard is properly fitted and fastened before commencing grinding operation. [How to attach and adjust the wheel guard] ( Fig. 1 ) 䡬 Set the wheel ass’y to the ...

  • Hitachi G13YF - page 7

    6 CAUTION When using the tool at any value except the full speed (Dial scale 6), the motor cannot be sufficiently cooled due to the decreased number of revolution. This could result in the risk of burning and damaging the motor before an overload protective mechanism starts to function. Make sure that you use the tool by lightly applying it to the ...

  • Hitachi G13YF - page 8

    7 MAINTENANCE AND INSPECTION 1. Inspecting the depressed center wheel Ensure that the depressed center wheel is free of cracks and surface defects. 2. Inspecting the mounting screws Regularly inspect all mounting screws and ensure that they are properly tightened. Should any of the screws be loose, retighten them immediately. Failure to do so could ...

  • Hitachi G13YF - page 9

    8 5. Replacing supply cord If the replacement of the supply cord is necessary, this has to be done by the manufacturer of this agent in order to avoid a safety hazard. 6. Maintenance of the motor The motor unit winding is the very “heart” of the power tool. Exercise due care to ensure the winding does not become damaged and/or wet with oil or w ...

  • Hitachi G13YF - page 10

    9 G1 2V A / G1 3V A ITEM NO. PART NAME Q’TY 1 SEAL LOCK SCREW 2 (W/SP. WASHER) M4 × 10 2 TAPPING SCREW D5 × 25 4 3 PUSHING BUTTON 1 4 GEAR COVER ASS'Y 1 5 NUT M6 1 6 SEAL RING (A) 1 7 WASHER (C) 1 8 BALL BEARING 629T12DDC3PS2-L 1 9 RUBBER RING 1 10 BEARING COVER 1 11 ARMATURE 1 12 FAN GUIDE 1 13 HEX. HD. TAPPING SCREW D4 × 70 2 14 STATOR ...

  • Hitachi G13YF - page 11

    10 502 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 20 21 22 23 24 25 26 27 28 29 31 32 33 35 36 37 34 39 46 47 38 40 41 42 48 49 53 58 59 52 55 56 61 57 62 63 19 60 54 50 41 45 43 40 44 30 51 52 503 64 501 G1 3YF ITEM NO. PART NAME Q’TY 1 SEAL LOCK SCREW 2 (W/SP. WASHER) M4 × 10 2 TAPPING SCREW D5 × 25 4 3 PUSHING BUTTON 1 4 GEAR COVER ASS&apo ...

  • Hitachi G13YF - page 12

    102 Code No. C99179313 M Printed in Malaysia Hitachi Koki Co., Ltd. Shinagawa Intercity Tower A, 15-1, Konan 2-chome, Minato-ku, Tokyo, Japan 02Back_G12VA_Eng 1/12/11, 4:43 PM 11 ...

Manufacturer Hitachi Category Grinder

Documents that we receive from a manufacturer of a Hitachi G13YF can be divided into several groups. They are, among others:
- Hitachi technical drawings
- G13YF manuals
- Hitachi product data sheets
- information booklets
- or energy labels Hitachi G13YF
All of them are important, but the most important information from the point of view of use of the device are in the user manual Hitachi G13YF.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Hitachi G13YF, service manual, brief instructions and user manuals Hitachi G13YF. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Hitachi G13YF.

Similar manuals

A complete manual for the device Hitachi G13YF, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Hitachi G13YF by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Hitachi G13YF.

A complete Hitachi manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Hitachi G13YF - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Hitachi G13YF, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Hitachi G13YF, that we can find in the current document
3. Tips how to use the basic functions of the device Hitachi G13YF - which should help us in our first steps of using Hitachi G13YF
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Hitachi G13YF
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Hitachi G13YF in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Hitachi G13YF?

Use the form below

If you did not solve your problem by using a manual Hitachi G13YF, ask a question using the form below. If a user had a similar problem with Hitachi G13YF it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)