English dropdown-ico

Manual JBL SCS160

12 pages 0.12 mb
Download

Go to site of 12

Summary
  • JBL SCS160 - page 1

    SCS1 60 SURROUND CINEMA SPEAKERS OWNER’S GUIDE ...

  • JBL SCS160 - page 2

    2 READ FIRST! Important Safety Precautions! 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with a dry cloth. 7. Do not block any ventilation open- ings. Install in accordance with the manufacturer’ s instructions. 8. Do not install n ...

  • JBL SCS160 - page 3

    3 INCLUDED THANK Y OU FOR CHOOSING JBL For more than 50 years, JBL has been involved in every aspect of music and film recording and reproduction, from live performances to the recordings you play in your home, car or office. W e’re confident that the JBL system you have chosen will provide every note of enjoy- ment that you expected – and that ...

  • JBL SCS160 - page 4

    4 SPEAKER PLACEMENT SUBWOOFER SURROUND SPEAKERS 5 – 6 ft FRONT SPEAKERS 0-2 ft The front speakers should be placed the same distance from each other as they are from the listening position. They should be placed at about the same height from the floor as the listeners’ ears will be, or they may be angled toward the listeners. The center channel ...

  • JBL SCS160 - page 5

    5 MOUNTING OPTIONS On shelves. W ALL-MOUNTING On the wall. W all brackets are included. Slide speaker onto support. On optional stands (FS400). Place speaker and support on wall plate. Attach plate to wall. The brackets should be placed, if possible, so that the screws will fasten into a wooden wall stud. If that is not possible, use properly selec ...

  • JBL SCS160 - page 6

    6 CONNECTION TIPS SPEAKER CONNECTIONS Separate and strip the ends of the speaker wire as shown. Speakers and electronics terminals have corresponding (+) and (–) terminals. Most manufac- turers of speakers and elec- tronics, including JBL, use red to denote the (+) terminal and black for the (–) terminal. The (+) lead of the speaker wire is not ...

  • JBL SCS160 - page 7

    7 DOLBY* PRO LOGIC* (NON-DIGIT AL) – SPEAKER LEVEL Use this installation method for Dolby Pro Logic applica- tions (not Dolby Digital, DTS ® or other digital processing), where the receiver/processor does not have a subwoofer output, or a volume-controlled preamp (line-) level output: Connect your receiver or amplifier’ s front left and right ...

  • JBL SCS160 - page 8

    8 DOLBY PRO LOGIC (NON-DIGIT AL) – LINE LEVEL Use this installation method for Dolby Pro Logic appli- cations (not Dolby Digital, DTS or other digital process- ing), where the receiver/ processor is equipped with a subwoofer output, or a volume-controlled preamp (line-) level output: Use RCA-type patch cords to connect the line-level sub- woofer ...

  • JBL SCS160 - page 9

    9 OPERA TION MIN MAX Sub woofer Level MIN MAX Sub woofer Level Move the Master Power switch (marked “Power” ¡ ) to the “•” (On) position to use the subwoofer . The SCS160 subwoofer will auto- matic ally turn on or go into standby (sleep) mode when left in the auto mode (“Auto/ On” switch ™ in the “Auto” position). When your rec ...

  • JBL SCS160 - page 10

    10 If there is no sound from any of the speakers: • Check that receiver/ampli- fier is on and a source is playing. • Check that the powered subwoofer is plugged in, and its Power switch ¡ is switched on (“ • ” position). • Check all wires and con- nections between receiver/ amplifier and speakers. Make sure all wires are con- nected. M ...

  • JBL SCS160 - page 11

    11 If there is no sound from the surround speakers: • Check all wires and con- nections between receiver/ amplifier and speakers. Make sure all wires are con- nected. Make sure none of the speaker wires are frayed, cut or punctured, or touching each other . • Review proper operation of your receiver/amplifier and its surround sound features. ? ...

  • JBL SCS160 - page 12

    12 SCS1 60 System Frequency Response 30Hz – 20kHz (–6dB) Satellites Recommended Power 10 – 100 W atts Impedance 8 Ohms nominal Sensitivity 88dB @ 1 W att/1 meter Tw eeter One 1/2" (13mm) titanium-laminate dome, video-shielded Midrange Dual 3" (75mm) drivers, video-shielded Dimensions (H x W x D) 8-1/8" x 3-1/2" x 3-7/8&quo ...

Manufacturer JBL Category Home Theater System

Documents that we receive from a manufacturer of a JBL SCS160 can be divided into several groups. They are, among others:
- JBL technical drawings
- SCS160 manuals
- JBL product data sheets
- information booklets
- or energy labels JBL SCS160
All of them are important, but the most important information from the point of view of use of the device are in the user manual JBL SCS160.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals JBL SCS160, service manual, brief instructions and user manuals JBL SCS160. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product JBL SCS160.

Similar manuals

A complete manual for the device JBL SCS160, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use JBL SCS160 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of JBL SCS160.

A complete JBL manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual JBL SCS160 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the JBL SCS160, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the JBL SCS160, that we can find in the current document
3. Tips how to use the basic functions of the device JBL SCS160 - which should help us in our first steps of using JBL SCS160
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with JBL SCS160
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of JBL SCS160 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning JBL SCS160?

Use the form below

If you did not solve your problem by using a manual JBL SCS160, ask a question using the form below. If a user had a similar problem with JBL SCS160 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)