English dropdown-ico

Manual PSC 1400I

180 pages 5.1 mb
Download

Go to site of 180

Summary
  • PSC 1400I - page 1

    Magellan ® 1400i Omni-Directional Imaging Scanner Product Reference Guide ...

  • PSC 1400I - page 2

    PSC Inc 959 T erry Street Eugene, Oregon 97402 T elephone: (541) 683-5700 F ax: (541) 345-7140 An Unpublished W ork - All r ights reserved. No par t of the content s of this documentation or the procedures described therein ma y be reproduced or transmitted in any f orm or by any means without prior writt en per mission of PSC Inc. or its wholly ow ...

  • PSC 1400I - page 3

    Product Reference Guide i Table of Contents About This Manual ............................................................................................................. .. 1-1 Manual Convention s ....................................................................................................... 1-1 Connecting the Scanner .................... ...

  • PSC 1400I - page 4

    ii Magellan ® 1400i Minimum Reads ... .......................................................................................................... 5-7 GTIN .......................................................................................................................... .. 5-8 Expand UPC/EAN to GT IN ......................................... ...

  • PSC 1400I - page 5

    Product Reference Guide iii Interleaved 2 of 5 Length 1, Length 2 Programming Instructions .........................................5-43 Interleaved 2 of 5 Stitching ............................................................................................ 5-44 Minimum Reads ........................................................................ ...

  • PSC 1400I - page 6

    iv Magellan ® 1400i Keyboard Wedge .. .......................................................................................................... B-2 Standard Feature Defa ults ................................................................................................... D- 1 Keyboard Model Cross Re ference .................................... ...

  • PSC 1400I - page 7

    Product Reference Guide 1-1 Chapter 1 Getting Started The Magellan ® 1400i Omni-D irectional Imaging Scanner offers hands-fr ee scanning for small, easily handled items and handheld scanning for bulkier items. I ts aggressive imaging perfor- mance and intuitive operation reduces user training and speeds checkout for better customer service. About ...

  • PSC 1400I - page 8

    Getting Started 1-2 Magellan ® 1400i Connecting the Scanner The scanner kit you order ed to match your interf ace should provide a compatible cable for your installation. U se the appropriate instructions be low to connect the scanner to the terminal, PC or other host device. U pon completing the connection via the appropri ate interface instr uct ...

  • PSC 1400I - page 9

    Programming Product Reference Guide 1-3 Wand Emulation Connection — Connect the scanner to the appropriate port on the termi- nal/PC via a decoder 1 using the correct cable for the inte rfac e t ype you o rdere d. Refe ren ce Figure 2 . IBM Connection — Connect the scanner to the IBM port on the terminal/PC using the cor- rect IBM cable. Refer ...

  • PSC 1400I - page 10

    Getting Started 1-4 Magellan ® 1400i LED and Beeper Indicators The scanner ’ s beeper sounds and its green LED illuminates to indicate various functions or errors on the scanner . The tables below list these indications. One exception to the behaviors listed in the tables is that the scanner’ s functions are programmable, and may or may not be ...

  • PSC 1400I - page 11

    Error Codes Product Reference Guide 1-5 Error Codes U pon startup, if the scanner flashes its indicato r LED or sounds an unexpected series of beep tones (other than normal power-up indications) , this means the scanner has not passed its auto- matic Selftest and has enter ed FRU 1 isolation mode. If the scanner is reset or the button is pressed, t ...

  • PSC 1400I - page 12

    Getting Started 1-6 Magellan ® 1400i NOTES ...

  • PSC 1400I - page 13

    Product Reference Guide 2-1 Chapter 2 General Features Double Read Timeout The Double R ead T imeout feature sets a time li mit that determines how much time must pass before reading the same label again (e .g. two identical items in succession). ST ART / END PROGRAMMING BAR CODES 0.1 Second 0.2 Second 0.3 Second 0.4 Second 0.5 Second 0.6 Second DE ...

  • PSC 1400I - page 14

    General Features 2-2 Magellan ® 1400i Double Read Timeout — cont. PDF Double Read Timeout The PDF Double R ead T imeout feature sets a time limit that determines how much time must pass before reading the same PDF417 label again (e.g. two identical PDF417 bar codes in suc- cession). ST ART / END PROGRAMMING BAR CODES 0.7 Second 0.8 Second 0.9 Se ...

  • PSC 1400I - page 15

    PDF Double Read Timeout Product Reference Guide 2-3 PDF Double Read Timeout — cont. ST ART / END PROGRAMMING BAR CODES 1.6 Seconds 1.8 Seconds DEF A UL T 1.9 Seconds 2 Seconds 2.1 Seconds 2.2 Seconds 2.3 Seconds 2.4 Seconds 2.55 Seconds ...

  • PSC 1400I - page 16

    General Features 2-4 Magellan ® 1400i Label Gone Timeout This feature sets the time after the last label se gment is seen before the scanner pr epares for a new label. PDF Label Gone Timeout This setting specifies how long the Label Gone Timeout timer runs when specifically collecting PDF label segments prior to discarding data. ST ART / END PROGR ...

  • PSC 1400I - page 17

    Sleep Mode Product Reference Guide 2-5 Sleep Mode This feature specifies the amount of time with no bar code reads bef ore the scanner enters sleep mode. ST ART / END PROGRAMMING BAR CODES 15 Seconds DEF A UL T 30 Seconds 1 Minute 2 Minutes 3 Minutes 4 Minutes 5 Minutes ...

  • PSC 1400I - page 18

    General Features 2-6 Magellan ® 1400i Sleep Mode — cont. ST ART / END PROGRAMMING BAR CODES 6 Minutes 7 Minutes 8 Minutes 9 Minutes 10 Minutes DEF A UL T 12 Minutes 15 Minutes 30 Minutes 1 Hour ...

  • PSC 1400I - page 19

    LED and Beeper Indicators Product Reference Guide 2-7 LED and Beeper Indicators Power On Alert Disables or enables the indication (a single beep ) that the scanner has finished all its pow er up tests and is now ready for operation. ST ART / END PROGRAMMING BAR CODES Disable Enable DEF A UL T ...

  • PSC 1400I - page 20

    General Features 2-8 Magellan ® 1400i Good Read: When to Indicate This feature specifies when the scanner will pro vid e indication (beep and/or flash its green LED) upon successfully reading a bar code. Choices are: • Good Read = I ndicate after decode • Good Read = I ndicate after transmit • Good Read = I ndicate after CT S goes inactive, ...

  • PSC 1400I - page 21

    LED and Beeper Indicators Product Reference Guide 2-9 Good Read Beep Control This feature enables/disables the scanner ’ s ability to beep upon a successful decode of a bar code. Good Read Beep Frequency Adjusts the good read beep to sound at a selectab le low , medium or high frequency , selectable from the list below . (Controls the beeper’ s ...

  • PSC 1400I - page 22

    General Features 2-10 Magellan ® 1400i Good Read Beep Length S pecifies the duration of a good read beep. ST ART / END PROGRAMMING BAR CODES 60msec DEF A UL T 80msec 100msec 120msec 140msec 160msec 180msec 200msec ...

  • PSC 1400I - page 23

    Productivi- ty Index Reporting (PIR) Product Reference Guide 2-11 Good Read Beep Volume Selects the beeper volume (loudness) upon a good read beep . There are thr ee selectable volume levels. Productivity Index Reporting (PIR) When PIR is enabled, label quality data is appe nded to decoded data befor e being presented to the POS. The PIR featur e a ...

  • PSC 1400I - page 24

    General Features 2-12 Magellan ® 1400i Scanning Features Aiming Pointer This feature enables/disables the Aiming P ointer for all symbologies. Targeted Scanning Mode U pon pressing the button, the scanner will project an aiming pattern to assist in centering o ver the bar code. Scanning then takes place as soon as the button is released. Configura ...

  • PSC 1400I - page 25

    Scanning Features Product Reference Guide 2-13 Target Mode: Active Time S pecifies the time duration the scanner attempts to decode labels while in the targeted mode of operation. ST ART / END PROGRAMMING BAR CODES Extra Short Duration Shor t Duration Medium Duration DEF A UL T Long Duration ...

  • PSC 1400I - page 26

    General Features 2-14 Magellan ® 1400i Target Mode: Linger Time S pecifies the time duration the scanner remains in the targeted mode of operation after reading a bar code or after T arget Mode: Active Time ha s ex pire d, b efo re re vert in g to Om ni- di rect ion al M ode. The linger timer starts upon a good read or upon timeout of T arget Mode ...

  • PSC 1400I - page 27

    Scanning Features Product Reference Guide 2-15 Wake Up Intensity This feature indicates the percentage of ambient light change which will trigger the scanner to wake up from Sleep M o de. Lower settings pro vide greater sensitivity . ST ART / END PROGRAMMING BAR CODES 5% 8% 10% DEF A UL T 15% 20% 25% 30% 35% ³ 03 B819 ...

  • PSC 1400I - page 28

    General Features 2-16 Magellan ® 1400i Wake Up Intensity — cont. ST ART / END PROGRAMMING BAR CODES 40% 50% 60% 70% 80% ...

  • PSC 1400I - page 29

    Product Reference Guide 3-1 Chapter 3 Interface Related Features At the time of this writing, the Scan ner supports the interfaces listed in Ta b l e 3 - 1 . Select the desired interface type from the table, then refer ence the page number given for the customizable features section associated with each interface. See Ta b l e 3 - 2 for a descripti ...

  • PSC 1400I - page 30

    Interface Related Features 3-2 Magellan ® 1400i Table 3-2. Keyboard Wedge Interface Reference I/F T ype PCs Supported A PC/XT w/Alternate Key Encoding B A T , PS/2 25-286, 30-286, 50, 50Z, 60, 70, 80, 90 & 95 w/Alternate Ke y Encoding C PS/2 25 and 30 w/Alternate Key Encoding D PC/XT w/Standard Ke y Encoding E A T , PS/2 25-286, 30-286, 50, 50 ...

  • PSC 1400I - page 31

    Interface Selection Product Reference Guide 3-3 Interface Selection ST ART / END PROGRAMMING BAR CODES RS-232 Standard RS-232 Wincor-Nixdorf IBM 4683 P or t 5B IBM 4683 P or t 9B IBM 4683 P or t 17 IBM USB USB K eyboard W and Emulation K eyboard W edge A ...

  • PSC 1400I - page 32

    Interface Related Features 3-4 Magellan ® 1400i Interface Selection — cont. ST ART / END PROGRAMMING BAR CODES K eyboard W edge B K eyboard W edge C K eyboard W edge D K eyboard W edge E K eyboard W edge F K eyboard W edge G K eyboard W edge H K eyboard W edge I K eyboard W edge J ...

  • PSC 1400I - page 33

    Interface Selection Product Reference Guide 3-5 Interface Selection — cont. ST ART / END PROGRAMMING BAR CODES K eyboard W edge K K eyboard W edge L K eyboard W edge M K eyboard W edge N K eyboard W edge O K eyboard W edge P K eyboard W edge Q K eyboard W edge R K eyboard W edge S ...

  • PSC 1400I - page 34

    Interface Related Features 3-6 Magellan ® 1400i Interface Selection — cont. ST ART / END PROGRAMMING BAR CODES K eyboard W edge T K eyboard W edge U K eyboard W edge V K eyboard W edge W K eyboard W edge X K eyboard W edge Y ...

  • PSC 1400I - page 35

    Interface Features Product Reference Guide 3-7 Interface Features Obey/Ignore Host Commands When set to ignore host commands, the scanner will ignore all host commands ex cept for the minimum set necessary to keep the inter face active and transmit labels F or normal operation of the interface, select Obey Host Commands. ST ART / END PROGRAMMING BA ...

  • PSC 1400I - page 36

    Interface Related Features 3-8 Magellan ® 1400i Interface Features — cont. Host Transmission Buffers S pecifies the number of host transmission(s) that may be buffered. By buffering data from a bar code, the scanner can continue to read a new bar code while the old one is being transmitted to the host. Selecting BUFFERS = 1 means that the first ...

  • PSC 1400I - page 37

    Interface Features Product Reference Guide 3-9 RS-232 Interface Features ST ART / END PROGRAMMING BAR CODES 1200 Baud 2400 Baud 4800 Baud 9600 Baud DEF A UL T 19200 Baud 38400 Baud 57600 Baud 115200 Baud ...

  • PSC 1400I - page 38

    Interface Related Features 3-10 Magellan ® 1400i RS-232 Interface Features — cont. ST ART / END PROGRAMMING BAR CODES 7 Data Bits 8 Data Bits DEF A UL T 1 Stop Bit DEF A UL T 2 Stop Bits Parity = None DEF A UL T P arity = Even P arity = Odd ...

  • PSC 1400I - page 39

    Interface Features Product Reference Guide 3-11 RS-232 Interface Features — cont. Hardware Flow Control Disable Hardware Control— The scanner transmits to the host regar dless of any activity on the CTS line. Enable CTS Flow Control— The CTS signal controls transm ission of data to the host. Enable CTS Scan Control— The CTS line must be act ...

  • PSC 1400I - page 40

    Interface Related Features 3-12 Magellan ® 1400i RS-232 Interface Features — cont. Intercharacter Delay This delay is inserted after each data character tr ansmitted. If the transmission speed is too high, the system may not be able to receive all charac ters. Y ou may need to adjust the delay to make the system work properly . ST ART / END PROG ...

  • PSC 1400I - page 41

    Interface Features Product Reference Guide 3-13 Intercharacter Delay — cont. Software Flow Control Disables/Enables softwar e control using XON/X OFF characters. ST ART / END PROGRAMMING BAR CODES Interchar Delay = 80 msec Interchar Dela y = 90 msec ST ART / END PROGRAMMING BAR CODES Disable Software Flow Contr ol DEF A UL T Enable Softw are Flow ...

  • PSC 1400I - page 42

    Interface Related Features 3-14 Magellan ® 1400i RS-232 Interface Features — cont. Host Echo When enabled, this feature passes all data throug h the scanner to the host as it comes in. This feature is used for applications where “ daisy ch aining” of RS-232 devices onto the same cable is necessary . If, for example, one of the devices in th ...

  • PSC 1400I - page 43

    Interface Features Product Reference Guide 3-15 RS-232 Interface Features — cont. Host Echo Quiet Interval This setting specifies the time interval of RS- 232 channel inactivity which must transpire before the scanner will break the host echo loop to tr ansmit the bar code data that has just been scanned to the host. ST ART / END PROGRAMMING BAR ...

  • PSC 1400I - page 44

    Interface Related Features 3-16 Magellan ® 1400i Host Echo Quiet Interval — cont. Signal Voltage: Normal/TTL S pecifies whether the RS-232 inter face pro vides T TL levels on the output pins TxD and R TS. ST ART / END PROGRAMMING BAR CODES Host Echo Quiet Interval = 80msec Host Echo Quiet Inter val = 90msec Host Echo Quiet Interval = 100msec ST ...

  • PSC 1400I - page 45

    Interface Features Product Reference Guide 3-17 RS-232 Interface Features — cont. RS-232 Invert Enables/disables inversion of RS-232 TXD and RXD signals. Beep on ASCII BEL Enables/disables ability of scanner to beep (sou nd a good read tone) on r eceiving an ASCII BEL (07 hex). ST ART / END PROGRAMMING BAR CODES Disable RS-232 In vert DEF A UL T ...

  • PSC 1400I - page 46

    Interface Related Features 3-18 Magellan ® 1400i RS-232 Interface Features — cont. Beep on Not on File Select for the host to beep (or not) when a no t-on-file (host command) condition is detected by the host. ST ART / END PROGRAMMING BAR CODES Disable Beep on Not On File Enable Beep on Not On File DEF A UL T ...

  • PSC 1400I - page 47

    Interface Features Product Reference Guide 3-19 RS-232 Interface Features — cont. ACK NAK Options This enables/disables the ability of the sc anner to support the RS-232 ACK/NAK protocol. When configured, the scanner and/or host sends an “ A CK” when it receives data properly , and sends “NAK” when the data is in error . Selections for th ...

  • PSC 1400I - page 48

    Interface Related Features 3-20 Magellan ® 1400i RS-232 Interface Features — cont. ACK Character NAK Character ST ART / END PROGRAMMING BAR CODES Sets the ACK char acter from the set of ASCII characters or any decimal v alue from 000 to 255. Pad entries of less than three di gits with zeros, as in “005”. T o configure this feature, scan the ...

  • PSC 1400I - page 49

    Interface Features Product Reference Guide 3-21 RS-232 Interface Features — cont. Retry on ACK NAK Timeout Enables/disables retry after the configurable ACK NAK T imeout V alue (set in the following fea- ture ) h as e xp ired . ACK NAK Timeout Value ST ART / END PROGRAMMING BAR CODES Disable Retry on ACK NAK Timeout Enable Retry on A CK NAK Timeo ...

  • PSC 1400I - page 50

    Interface Related Features 3-22 Magellan ® 1400i RS-232 Interface Features — cont. ACK NAK Retry Count ST ART / END PROGRAMMING BAR CODES This feature sets the n umber of times for the scanner to retry a label transmission under a retr y condition. 000 = No retry 001 - 254 = Retry for the specified number of times 255 = Retr y fore ver T o confi ...

  • PSC 1400I - page 51

    Interface Features Product Reference Guide 3-23 RS-232 Interface Features — cont. ACK NAK Error Handling This item specifies the method the scanner will use to handle errors detected while waiting to receive the A CK character from the host. Errors include unrecognized host commands and com- munication errors such as parity or framing errors. Cho ...

  • PSC 1400I - page 52

    Interface Related Features 3-24 Magellan ® 1400i RS-232 Interface Features — cont. Transmission Failure Indication Enables/disables bad-label indication upon transmission failure. IBM-USB Interface Features IBM-USB Device usage The IBM-USB protocol allows for the scanner to be identified as one of two differ ent types of bar code scanners. Depen ...

  • PSC 1400I - page 53

    Interface Features Product Reference Guide 3-25 IBM IBM Transmit Labels in Code 39 Format This feature enables/disables scanner's ability to set a symbology identifier for a specified label to Code 39 before transmitting that label data to an IBM host. This applies to: Code 128, Coda- bar and Code 93 for IBM USB; Code 128, Codabar and Code 93 ...

  • PSC 1400I - page 54

    Interface Related Features 3-26 Magellan ® 1400i Wand Emulation Supported Symbologies The W and Emulation interface will transmit bar co de data as a wand device would. This inter- face will transmit the following bar code symbologies: •U P C / E A N • UPC/EAN with addons •C o d e 3 9 • F ull ASCII Code 39 • Interleaved 2 of 5 • Codaba ...

  • PSC 1400I - page 55

    Interface Features Product Reference Guide 3-27 Wand Emulation — cont. Bar/Space Polarity Low/H igh — Black will be transmitted as a low voltage lev el (0 to +0.7V ) and space as high level (+2.4 to +5.25V). High/Lo w — Black will be transmitted as a high voltage level (+2.4 to +5.25V) and space as low level (0 to +0.7V). Wand Idle State This ...

  • PSC 1400I - page 56

    Interface Related Features 3-28 Magellan ® 1400i Wand Emulation — cont. Signal Speed The speed of the transmission can be set. Th is selects the width of the minimum narrow bar . 330 microseconds 660 microseconds Transmit Trailing Noise The transmission of noise pulses after the label may be enabled or disabled. ST ART / END PROGRAMMING BAR CODE ...

  • PSC 1400I - page 57

    Interface Features Product Reference Guide 3-29 Wand Emulation — cont. Transmit Leading Noise The transmission of noise pulses before the bar code may be enabled or disabled. Symbology Conversion W and Emulation can convert all bar code s to a single symbology . Choices are: No C o n v e r s i o n Convert to Code 39 Convert to Code 128 ST ART / E ...

  • PSC 1400I - page 58

    Interface Related Features 3-30 Magellan ® 1400i Keyboard Wedge and USB Keyboard As a keyboard interface, the scanner supports most popular PCs and IBM terminals. The instal- lation of the wedge is a fairly simple process that doesn ’ t require any changes of software or hard- ware. Keyboard Layout The Keyboard Lay out option supports many co un ...

  • PSC 1400I - page 59

    Interface Features Product Reference Guide 3-31 Keyboard Wedge — cont. ST ART / END PROGRAMMING BAR CODES Italy Norwa y P or tugal Spain Sweden Switzerland Japan 106 K ey Hungar y Czech ...

  • PSC 1400I - page 60

    Interface Related Features 3-32 Magellan ® 1400i Keyboard Wedge — cont. Caps Lock State S pecifies the format in which the scanner sends character data. ST ART / END PROGRAMMING BAR CODES Slov akia Romania Croatia P oland ST ART / END PROGRAMMING BAR CODES Disable Caps Lock DEF A UL T Caps Lock “ON” Shift Lock “ON” ...

  • PSC 1400I - page 61

    Interface Features Product Reference Guide 3-33 Keyboard Wedge — cont. Power-On Simulation All PCs check the keyboard status during the po wer-on Selftest. I t is recommended that you enable this function if you are working without a keyboar d installation. It simulates keyboar d timing and passes the keyboard status to the PC during po wer-on. N ...

  • PSC 1400I - page 62

    Interface Related Features 3-34 Magellan ® 1400i Keyboard Wedge — cont. Control Characters S pecifies how the scanner transmits ASCII co ntrol characters to the host. Choices are: • Disable Control Characters • Enable transmission of control characters to host • Send characters between 00H and 1FH accor ding to a special function-key mappi ...

  • PSC 1400I - page 63

    Interface Features Product Reference Guide 3-35 Keyboard Wedge — cont. Wedge Quiet Interval Quiet Interval is the amount of time to look fo r keyboard activity before the scanner breaks the keyboard connection in or der to transmit data to the host. NO TE This feature does not apply to the USB K eyboard interface. ST ART / END PROGRAMMING BAR COD ...

  • PSC 1400I - page 64

    Interface Related Features 3-36 Magellan ® 1400i Keyboard Wedge — cont. Intercharacter Delay NO TE This feature does not apply to the USB K eyboard interface. ST ART / END PROGRAMMING BAR CODES One-half of the delay specified below is inser ted between scancodes within each character . If the transmission speed is too hig h, the system may not b ...

  • PSC 1400I - page 65

    Product Reference Guide 4-1 Chapter 4 Data Editing Data Editing Overview When a bar code is scanned, additional inform ation can be sent to the host computer along with the bar code data. This combination of bar code data and supplementary user-defined data is called a “ message string.” The features in this chapter can be used to build specifi ...

  • PSC 1400I - page 66

    Data Editing 4-2 Magellan ® 1400i • Enter prefix es and suffixes in the order in which you want them to appear on the output. Global Prefix/Suffix U p to 20 ASCII characters may be added as a prefix (in a position before the bar code data) and/ or as a suffix (in a position following the bar code data) as indicated in Figure 4-2 . Figure 4-2. Pr ...

  • PSC 1400I - page 67

    Global Pre- fix/Suffix Product Reference Guide 4-3 Global Prefix/Suffix — cont. ST ART / END PROGRAMMING BARCODES Sets up to 20 characters each from the set of ASCII characters or an y hex v alue from 0 to FF . T o configure this f eature, scan t he “ST ART/END” bar code abo ve to place the unit in Progra mming Mode, then the “Set Prefix” ...

  • PSC 1400I - page 68

    Data Editing 4-4 Magellan ® 1400i AIM ID AIM (Automatic I dentification Manufacturers) label identifiers ar e assigned from a globally standardized list — as opposed to custom label ID characters y ou select yourself — and can be included with scanned bar code data. AIM label id entifiers consist of three characters as follows: • A close bra ...

  • PSC 1400I - page 69

    Label ID Product Reference Guide 4-5 Label ID A L a b e l ID i s a c u s t om i z a b l e c o d e o f up t o t w o A SC I I c h a ra c t e r s ( 00 - F F h e x ), u s e d t o i d e n t i fy a bar code (symbology) type. See Appendix D , Default Settings , for a listing for common symbolo- gies. I t can be appended previous to or follow ing the trans ...

  • PSC 1400I - page 70

    Data Editing 4-6 Magellan ® 1400i Label ID — cont. ST ART / END PROGRAMMING BARCODES Label ID T ransmission: Disable Label ID P osition: Before Bar Code Data DEF A UL T Label ID P osition: After Bar Code Data Set UPC-A Label ID Character(s) DEF A UL T SETTING FOR THIS FEA TURE: A (41 hex) DEF A UL T SETTING FOR THIS FEA TURE: A (41 hex) Set UPC- ...

  • PSC 1400I - page 71

    Label ID Product Reference Guide 4-7 Label ID — cont. ST ART / END PROGRAMMING BARCODES DEF A UL T SETTING FOR THIS FEA TURE: E (45 hex) Set UPC-E w/P2 Addon Label ID Character(s) Set UPC-E w/P5 Addon Label ID Character(s) DEF A UL T SETTING FOR THIS FEA TURE: E (45 hex) DEF A UL T SETTING FOR THIS FEA TURE: E (45 hex) Set UPC-E w/C128 Addon Labe ...

  • PSC 1400I - page 72

    Data Editing 4-8 Magellan ® 1400i Label ID — cont. ST ART / END PROGRAMMING BARCODES DEF A UL T SETTING FOR THIS FEA TURE: F (46 hex) Set EAN-13 w/P2 Addon Label ID Character(s) Set EAN-13 w/P5 Addon Label ID Character(s) DEF A UL T SETTING FOR THIS FEA TURE: F (46 hex) DEF A UL T SETTING FOR THIS FEA TURE: F (46 hex) Set EAN-13 w/C128 Addon Lab ...

  • PSC 1400I - page 73

    Label ID P ro d u ct R e fe re n ce G u id e 4-9 Label ID — cont. ST ART / END PROGRAMMING BARCODES DEF A UL T SETTING FOR THIS FEA TURE: G8 (4738 hex) Set GTIN w/C128 addon Label ID Character(s) Set RSS-14 Label ID Character(s) DEF A UL T SETTING FOR THIS FEA TURE: R4 (5234 hex) DEF A UL T SETTING FOR THIS FEA TURE: RX (5258 hex) Set RSS Expande ...

  • PSC 1400I - page 74

    Data Editing 4-10 Magellan ® 1400i Label ID — cont. ST ART / END PROGRAMMING BARCODES DEF A UL T SETTING FOR THIS FEA TURE: % (25 hex) Set Codabar Label ID Character(s) Set Code 93 Label ID Character(s) DEF A UL T SETTING FOR THIS FEA TURE: & (26 hex) DEF A UL T SETTING FOR THIS FEA TURE: @ (40 hex) Set Code 11 Label ID Character(s) Set MSI/ ...

  • PSC 1400I - page 75

    Case Con- version Product Reference Guide 4-11 Case Conversion This feature can convert scanned bar code data to either all lo wer case (a through z) or all upper case (A through Z) characters. NO TE Case con version affects ONL Y scanned bar code data, and does not affect Label ID , Prefix, Suffix, or other appended data. ST ART / END PROGRAMMING ...

  • PSC 1400I - page 76

    Data Editing 4-12 Magellan ® 1400i Character Conversion Character conversion is an eight byte configuration item. The eight bytes ar e 4 character pairs represented in hexadecimal ASCII v alues. The firs t character in the pair is the character that will be converted. The second character in the pa ir is the character to convert to. If the charac- ...

  • PSC 1400I - page 77

    Product Reference Guide 5-1 Chapter 5 Symbologies The scanner supports the following symbologies (bar code types). Options for each symbology are included in this chapter . Factory Defaults— for the standard RS-232 interface are indicated in bold text throughout this section. Reference Appendix D , Def ault Settings for default exceptions for you ...

  • PSC 1400I - page 78

    Symbologies 5-2 Magellan ® 1400i UPC-A — continued Check Digit Transmission Enable this option to transmit the check digit along with UPC-A bar code data. Expand UPC-A to EAN-13 Expands UPC-A data to the EAN-13 data format. Selecting this featur e also changes the sym- bology ID to match those required for EAN-13. ST ART / END PROGRAMMING BAR CO ...

  • PSC 1400I - page 79

    UPC-A Product Reference Guide 5-3 UPC-A — continued Number System Transmission This feature enables/disables transmission of UPC-A System N umber . UPC-A Minimum Reads This feature specifies the minimum number of consecutive times a UPC-A label must be decoded before it is accepted as a good read. ST ART / END PROGRAMMING BAR CODES Disable Number ...

  • PSC 1400I - page 80

    Symbologies 5-4 Magellan ® 1400i UPC-A — continued UPC-A In-store Minimum Reads This feature specifies the minimum number of co nsecutive times an in-store printed label must be decoded before it is accepted as a good read. ST ART / END PROGRAMMING BAR CODES Minimum = 1 Read DEF A UL T Minimum = 2 Reads Minimum = 3 Reads Minimum = 4 Reads ...

  • PSC 1400I - page 81

    UPC-E Product Reference Guide 5-5 UPC-E The following options apply to the UPC-E symbology . Disable/Enable UPC-E When disabled, the scanner will not read UPC-E bar codes. Check Digit Transmission Enable this option to transmit the check digit along with UPC-E bar code data. ST ART / END PROGRAMMING BAR CODES Disable UPC-E Enable UPC-E DEF A UL T S ...

  • PSC 1400I - page 82

    Symbologies 5-6 Magellan ® 1400i UPC-E — continued Number System Digit The N umber System Digit (NSD) which is always a zero (0) in the leading position can be optionally included (or not) with scanned bar code data. Expand UPC-E to UPC-A Enables/disables expansion of UPC-E labels to UPC-A. Selecting this featur e also changes the symbology ID t ...

  • PSC 1400I - page 83

    UPC-E Product Reference Guide 5-7 UPC-E — continued Expand UPC-E to EAN13 Enables/disables expansion of UPC-E labels to EAN-13. Selecting this featur e also changes the symbology ID to match those required for EAN-13. Minimum Reads This feature specifies the minimum number of consecutive times a UPC-E label must be decoded before it is accepted a ...

  • PSC 1400I - page 84

    Symbologies 5-8 Magellan ® 1400i GTIN The following options apply to the GTIN label data format. Expand UPC/EAN to GTIN When this feature is enabled, the scanner will translate UPC/EAN labels to the 14 digit GTIN format. ST ART / END PROGRAMMING BAR CODES Don’t Expand to GTIN DEF A UL T Expand to GTIN ...

  • PSC 1400I - page 85

    EAN-13 Product Reference Guide 5-9 EAN-13 The following options apply to the EAN-13 symbology . Disable/Enable EAN-13 When disabled, the scanner will not read EAN-13 bar codes. Check Digit Transmission Enable this option to transmit the chec k digit along with EAN-13 bar code data. ST ART / END PROGRAMMING BAR CODES Disable EAN-13 Enable EAN-13 DEF ...

  • PSC 1400I - page 86

    Symbologies 5-10 Magellan ® 1400i EAN-13 — continued EAN-13 Flag 1 Character Enables/disables transmission of an EAN/JAN13 Fl ag1 character . ISBN When enabled, this feature truncates the leadin g three digits from labels that contain ISBN (International S tandard Book N umber) and append s an ISBN check character to the end of the label. These ...

  • PSC 1400I - page 87

    EAN-13 Product Reference Guide 5-11 EAN-13 — continued Minimum Reads This feature specifies the minimum number of consecutive times an EAN-13 label must be decoded before it is accepted as a good read. ST ART / END PROGRAMMING BAR CODES Minimum = 1 Read DEF A UL T Minimum = 2 Reads Minimum = 3 Reads Minimum = 4 Reads ...

  • PSC 1400I - page 88

    Symbologies 5-12 Magellan ® 1400i EAN-8 The following options apply to the EAN-8 symbology . Disable/Enable EAN-8 When disabled, the scanner will not read EAN-8 bar codes. Check Digit Transmission Enable this option to transmit the check Digit along with EAN-8 bar code data. ST ART / END PROGRAMMING BAR CODES Disable EAN-8 Enable EAN-8 DEF A UL T ...

  • PSC 1400I - page 89

    EAN-8 Product Reference Guide 5-13 EAN-8 — continued Expand EAN-8 to EAN-13— Expands EAN-8 data to the EAN-13 data format. Selecting this feature also changes the symbology ID to match those requir ed for EAN-13. Minimum Reads This feature specifies the minimum number of consecutive times an EAN-8 label must be decoded before it is accepted as ...

  • PSC 1400I - page 90

    Symbologies 5-14 Magellan ® 1400i Enable EAN Two-Label Enables/disables the ability of the scanner to decode EAN two-label pairs. Enable EAN Two-Label Combined Enables/disables the transmitting of an EAN two label pair as one label. ST ART / END PROGRAMMING BAR CODES Disable EAN T wo-Label Enable EAN T wo-Label ST ART / END PROGRAMMING BAR CODES D ...

  • PSC 1400I - page 91

    Add-ons Product Reference Guide 5-15 Add-ons Add-ons (or supplemental characters) are commonly added to the end of UPC/EAN bar codes. The scanner will read the add-ons if they are enabled and in the field of view . Three add-on types are supported: 2-digit, 5-digit an d Code 128 add-ons. S upported options are: None— This option directs the scann ...

  • PSC 1400I - page 92

    Symbologies 5-16 Magellan ® 1400i Add-ons — continued ST ART / END PROGRAMMING BAR CODES Disable Optional 2-Digit Add-ons DEF A UL T Enable Optional 2-Digit Add-ons Disable Optional 5-Digit Add-ons DEF A UL T Enable Optional 5-Digit Add-ons Disable Optional Code 128 Add-ons DEF A UL T Enable Optional Code 128 Add-ons ...

  • PSC 1400I - page 93

    RSS-14 Product Reference Guide 5-17 RSS-14 The following options apply to the RSS-14 symbology . Disable/Enable RSS-14 When this feature is disabled, the scanner will not read RSS-14 bar codes. RSS-14 UCC/EAN 128 Emulation When enabled, RSS-14 bar codes will be translated to the UCC/EAN 128 label data format. ST ART / END PROGRAMMING BAR CODES Disa ...

  • PSC 1400I - page 94

    Symbologies 5-18 Magellan ® 1400i RSS-14 — continued Minimum Reads This feature specifies the minimum number of consecutive times an RSS-14 label must be decoded before it is accepted as a good read. ST ART / END PROGRAMMING BAR CODES Minimum = 1 Read DEF A UL T Minimum = 2 Reads Minimum = 3 Reads Minimum = 4 Reads ...

  • PSC 1400I - page 95

    RSS-14 Product Reference Guide 5-19 RSS-14 — continued RSS-14 2D Component This setting enables/disables RSS-14/Micro PDF417 composite labels. NO TE Both RSS-14 and Micro PDF417 must be enab led to read these composite labels. ST ART / END PROGRAMMING BAR CODES Disable RSS-14 2D Component DEF A UL T Enable alw ays on RSS-14 2D Component ...

  • PSC 1400I - page 96

    Symbologies 5-20 Magellan ® 1400i RSS Expanded The following options apply to the RSS Expanded symbology . Disable/Enable RSS Expanded When this feature is disabled, the scanner will not read RSS Expanded bar codes. RSS Expanded UCC/EAN 128 Emulation When enabled, RSS Expanded bar codes will be translated to the UCC/EAN 128 label data for- mat. ST ...

  • PSC 1400I - page 97

    RSS Expanded Product Reference Guide 5-21 RSS Expanded — continued Length Control Fixed Length Decoding— Wh en fi xed le ng th de co di n g i s e na bl ed , t he sc an ne r w il l d e co de a bar code if the label length matches one of the configurable fixed lengths. Variable Length Decoding— When variable length decoding is enabled, the scan ...

  • PSC 1400I - page 98

    Symbologies 5-22 Magellan ® 1400i RSS Expanded — continued RSS Expanded Length 1, Length 2 Programming Instructions 1. Scan the ST AR T/END bar code. 2. Scan either the Set Length 1 or S et Length 2 bar code. 3. T urn to Appendix C , Alpha-Numer ic P ad and scan the three digits (zero padded) r epresent- ing the length in decimal notation. 4. Sc ...

  • PSC 1400I - page 99

    RSS Expanded Product Reference Guide 5-23 RSS Expanded — continued Minimum Reads This feature specifies the minimum number of consecutive times an RSS Expanded label must be decoded before it is accepted as a good read. ST ART / END PROGRAMMING BAR CODES Minimum = 1 Read DEF A UL T Minimum = 2 Reads Minimum = 3 Reads Minimum = 4 Reads ...

  • PSC 1400I - page 100

    Symbologies 5-24 Magellan ® 1400i RSS Expanded — continued RSS Expanded 2D Component This setting enables/disables RSS Expanded/Micro PDF417 composite labels. RSS Limited The following options apply to the RSS Limited symbology . Disable/Enable RSS Limited When this feature is disabled, the sca nner will not r ead RSS Limited bar codes. NO TE Bo ...

  • PSC 1400I - page 101

    RSS Limited Product Reference Guide 5-25 RSS Limited — continued RSS Limited UCC/EAN 128 Emulation When enabled, RSS Limited bar codes will be translated to the UCC/EAN 128 label data for- mat. Minimum Reads This feature specifies the minimum number of co nsecutive times an RSS Limited label must be decoded before it is accepted as a good read. S ...

  • PSC 1400I - page 102

    Symbologies 5-26 Magellan ® 1400i RSS Limited — continued RSS Limited 2D Component This setting enables/disables RSS Limited/Micro PDF417 composite labels. NO TE Both RSS Limited and Micro PDF417 must be enabled to read these composite labels. ST ART / END PROGRAMMING BAR CODES Disable RSS Limited 2D Component DEF A UL T Enable alw ays on RSS Li ...

  • PSC 1400I - page 103

    Code 39 Product Reference Guide 5-27 Code 39 The following options apply to the Code 39 symbology . Disable/Enable Code 39 When this feature is disabled, the scanner will not read Code 39 bar codes. Check Character Calculation When enabled, the scanner will calculate the check character of the labels. T urn this option on only when a checksum is pr ...

  • PSC 1400I - page 104

    Symbologies 5-28 Magellan ® 1400i Code 39 — continued Check Character Transmit Enable this option to transmit the check character with scanned bar code data. Start/Stop Characters Enables/disables transmission of Code39 start and stop characters. ST ART / END PROGRAMMING BAR CODES Disable Chec k Char T ransmission Enable Check Char T ransmission ...

  • PSC 1400I - page 105

    Code 39 Product Reference Guide 5-29 Code 39 — continued Code 39 Full ASCII Enables/disables the translation of Code 39 characters to Code 39 full-ASCII characters . ST ART / END PROGRAMMING BAR CODES Disable Code 39 Full ASCII DEF A UL T Enable Code 39 Full ASCII ...

  • PSC 1400I - page 106

    Symbologies 5-30 Magellan ® 1400i Code 39 — continued Length Control Fixed Length Decoding— When fixed length decoding is enabled, the scanner will decode a bar code if the label length matches one of the configurable fixed lengths. Variable Length Decoding— When variable length decoding is enabled, the scanner will decode a bar code if the ...

  • PSC 1400I - page 107

    Code 39 Product Reference Guide 5-31 Code 39 — continued Code 39 Length 1, Length 2 Programming Instructions 1. Scan the ST AR T/END bar code. 2. Scan either the Set Length 1 or S et Length 2 bar code. 3. T urn to Appendix C , Alpha-Numer ic P ad and scan the three digits (zero padded) r epresent- ing the length in decimal notation. 4. Scan the S ...

  • PSC 1400I - page 108

    Symbologies 5-32 Magellan ® 1400i Code 39 — continued Code 39 Stitching Enables/disables stitching for Code 39 labels. Wh en parts of a Code 39 bar code are presented to the scanner with this feature enabled, the ba r code parts will be assembled by the scanner ’ s software, and the data will be decoded if all bar code proofing r equirements a ...

  • PSC 1400I - page 109

    Pharmacode 39 Product Reference Guide 5-33 Pharmacode 39 The following options apply to the Pharmacode 39 symbology . Disable/Enable Pharmacode 39 When this feature is disabled, the scanner will not read P harmacode 39 bar codes. Start/Stop Characters Enables or disables transmission of Pharmacode 39 start/stop characters. ST ART / END PROGRAMMING ...

  • PSC 1400I - page 110

    Symbologies 5-34 Magellan ® 1400i Pharmacode 39 — continued Check Character Transmit Enable this option to transmit the check character with scanned bar code data. ST ART / END PROGRAMMING BAR CODES Disable Chec k Char T ransmission Enable Check Char T ransmission DEF A UL T ...

  • PSC 1400I - page 111

    Code 128 and UCC/EAN 128 Product Reference Guide 5-35 Code 128 and UCC/EAN 128 The following options apply to the Code 128 and EAN 128 symbologies. Code 128— When this feature is disabled, the scan ner will not read Code 128 bar codes. UCC/EAN 128— Enables/disables ability of scanner to translate UCC/EAN 128 labels to the EAN 128 data format. S ...

  • PSC 1400I - page 112

    Symbologies 5-36 Magellan ® 1400i Code 128 and UCC/EAN 128 — continued Transmit Function Characters Enables/disables transmission of Code128 function characters 1, 2, 3, and 4. F unction codes are transmitted as follows: • FNC1 = 80 hex • FNC2 = 81 hex • FNC3 = 82 hex • FNC4 = 83 hex ST ART / END PROGRAMMING BAR CODES Don’t T ransmit F ...

  • PSC 1400I - page 113

    Code 128 and UCC/EAN 128 Product Reference Guide 5-37 Code 128 and UCC/EAN 128 — continued Length Control Fixed Length Decoding— Wh en fi xed le ng th de co di n g i s e na bl ed , t he sc an ne r w il l d e co de a bar code if the label length matches one of the configurable fixed lengths. Variable Length Decoding— When variable length decod ...

  • PSC 1400I - page 114

    Symbologies 5-38 Magellan ® 1400i Code 128 and UCC/EAN 128 — continued Code 128 Length 1, Length 2 Programming Instructions 1. Scan the ST AR T bar code. 2. Scan either the Set Length 1 or S et Length 2 bar code. 3. T urn to Appendix C , Alpha-Numer ic P ad and scan the three digits (zero padded) r epresent- ing the length in decimal notation. 4 ...

  • PSC 1400I - page 115

    Code 128 and UCC/EAN 128 Product Reference Guide 5-39 Code 128 and UCC/EAN 128 — continued Code 128 Stitching Enables/disables stitching for Code 128 labels. When parts of a Code 128 bar code are pre- sented to the scanner with this feature enabled, the bar code parts will be assembled by the scan- ner’ s software, and the data will be decoded ...

  • PSC 1400I - page 116

    Symbologies 5-40 Magellan ® 1400i Interleaved 2 of 5 The following options apply to the Inte rleav ed 2 of 5 (I 2 of 5) symbology . Disable/Enable Interleaved 2 of 5 When this feature is disabled, the scanner will not re ad Interleaved 2 of 5 bar codes. Check Digit Calculation When enabled, the scanner will calc ulate the check digit of the labels ...

  • PSC 1400I - page 117

    Interleaved 2 of 5 Product Reference Guide 5-41 Interleaved 2 of 5 — continued Check Digit Transmit Enable this option to transmit the check digit with scanned bar code data. ST ART / END PROGRAMMING BAR CODES Disable Check Digit Calculation DEF A UL T Enable Chec k Digit Calculation ...

  • PSC 1400I - page 118

    Symbologies 5-42 Magellan ® 1400i Interleaved 2 of 5 — continued Length Control Fixed Length Decoding— When fixed length decoding is enabled, the scanner will decode a bar code if the label length matches one of the configurable fixed lengths. Variable Length Decoding— When variable length decoding is enabled, the scanner will decode a bar c ...

  • PSC 1400I - page 119

    Interleaved 2 of 5 Product Reference Guide 5-43 Interleaved 2 of 5 — continued Interleaved 2 of 5 Length 1, Length 2 Programming Instructions 1. Scan the ST AR T bar code. 2. Scan either the Set Length 1 or S et Length 2 bar code. 3. T urn to Appendix C , Alpha-Numer ic P ad and scan the three digits (zero padded) r epresent- ing the length in de ...

  • PSC 1400I - page 120

    Symbologies 5-44 Magellan ® 1400i Interleaved 2 of 5 — continued Interleaved 2 of 5 Stitching Enables/disables stitching for Interleaved 2 of 5 labels. When parts of an Interleav ed 2 of 5 bar code are presented to the scanner with this featur e enabled, the bar code parts will be assembled by the scanner’ s software, and the data will be deco ...

  • PSC 1400I - page 121

    Interleaved 2 of 5 Product Reference Guide 5-45 Interleaved 2 of 5 — continued Minimum Reads This feature specifies the minimum number of consecutive times an I nterleaved 2 of 5 label must be decoded before it is accepted as a good read. ST ART / END PROGRAMMING BAR CODES Minimum = 1 Read DEF A UL T Minimum = 2 Reads Minimum = 3 Reads Minimum = ...

  • PSC 1400I - page 122

    Symbologies 5-46 Magellan ® 1400i Codabar The following options apply to the Codabar symbology . Disable/Enable Codabar When this feature is disabled, the scanner will not read Codabar bar codes. Check Character Verification When enabled, the scanner will verify the check character of the labels. ST ART / END PROGRAMMING BAR CODES Disable Codabar ...

  • PSC 1400I - page 123

    Codabar Product Reference Guide 5-47 Codabar — continued Check Character Transmit Enable this option to transmit the check character with scanned bar code data. ST ART / END PROGRAMMING BAR CODES Disable Chec k Char T ransmission Enable Check Char T ransmission DEF A UL T ...

  • PSC 1400I - page 124

    Symbologies 5-48 Magellan ® 1400i Codabar — continued Length Control Fixed Length Decoding— When fixed length decoding is enabled, the scanner will decode a bar code if the label length matches one of the configurable fixed lengths. Variable Length Decoding— When variable length decoding is enabled, the scanner will decode a bar code if the ...

  • PSC 1400I - page 125

    Codabar Product Reference Guide 5-49 Codabar — continued Codabar Length 1, Length 2 Programming Instructions 1. Scan the ST AR T bar code. 2. Scan either the Set Length 1 or S et Length 2 bar code. 3. T urn to Appendix C , Alpha-Numer ic P ad and scan the three digits (zero padded) r epresent- ing the length in decimal notation. 4. Scan the END b ...

  • PSC 1400I - page 126

    Symbologies 5-50 Magellan ® 1400i Codabar — continued Start/Stop Character Type Codabar has four pairs of S tart/Stop patterns. S elect one pair to match your application. Start/Stop Character Transmission The transmission of start and end char acters of Codabar is selected below . ST ART / END PROGRAMMING BAR CODES Star t/Stop T ype: ABCD/TN*E ...

  • PSC 1400I - page 127

    Codabar Product Reference Guide 5-51 Codabar — continued Start/Stop Character Match This feature enables/disables the requir ement that start and stop characters match . Codabar Stitching Enables/disables stitching for Codabar labels. When parts of a Codabar label are presented to the scanner with this feature enabled, the bar code parts will be ...

  • PSC 1400I - page 128

    Symbologies 5-52 Magellan ® 1400i Codabar — continued Minimum Reads This feature specifies the minimum number of consecutive times a Codabar label must be decoded before it is accepted as a good read. ST ART / END PROGRAMMING BAR CODES Minimum = 1 Read DEF A UL T Minimum = 2 Reads Minimum = 3 Reads Minimum = 4 Reads ...

  • PSC 1400I - page 129

    Code 93 Product Reference Guide 5-53 Code 93 The following options apply to the Code 93 symbology . Disable/Enable Code 93 When this feature is disabled, the scanner will not read Code 93 bar codes. ST ART / END PROGRAMMING BAR CODES Disable Code 93 DEF A UL T Enable Code 93 ...

  • PSC 1400I - page 130

    Symbologies 5-54 Magellan ® 1400i Code 93 — continued Length Control Fixed Length Decoding— When fixed length decoding is enabled, the scanner will decode a bar code if the label length matches one of the configurable fixed lengths. Variable Length Decoding— When variable length decoding is enabled, the scanner will decode a bar code if the ...

  • PSC 1400I - page 131

    Code 93 Product Reference Guide 5-55 Code 93 — continued Code 93 Length 1, Length 2 Programming Instructions 1. Scan the ST AR T bar code. 2. Scan either the Set Length 1 or S et Length 2 bar code. 3. T urn to Appendix C , Alpha-Numer ic P ad and scan the three digits (zero padded) r epresent- ing the length in decimal notation. 4. Scan the END b ...

  • PSC 1400I - page 132

    Symbologies 5-56 Magellan ® 1400i Code 93 — continued Code 93 Stitching Enables/disables stitching for Code 93 bar codes. When parts of a Code 93 label are presented to the scanner with this feature enabled, the ba r code parts will be assembled by the scanner ’ s software, and the data will be decoded if all bar code proofing r equirements ar ...

  • PSC 1400I - page 133

    MSI/Plessey Product Reference Guide 5-57 MSI/Plessey The following options apply to the MSI/Plessey symbology . Disable/Enable MSI/Plessey When this feature is disabled, the scanner will not read MSI/P lessey bar codes. Check Digit Verification This feature specifies whether one or two chec k digits are to be calculated and v erified. ST ART / END ...

  • PSC 1400I - page 134

    Symbologies 5-58 Magellan ® 1400i MSI/Plessey — continued Check Digit Transmit When this option is enabled, the scanner will transmit one-digit or two-digit check digits, depending upon the setting for check digit verification. Number of Check Characters S pecifies number of MSI/Plessey check characters to be calculated and verified ST ART / END ...

  • PSC 1400I - page 135

    MSI/Plessey Product Reference Guide 5-59 MSI/Plessey — continued Length Control Fixed Length Decoding— Wh en fi xed le ng th de co di n g i s e na bl ed , t he sc an ne r w il l d e co de a bar code if the label length matches one of the configurable fixed lengths. Variable Length Decoding— When variable length decoding is enabled, the scanne ...

  • PSC 1400I - page 136

    Symbologies 5-60 Magellan ® 1400i MSI/Plessey — continued MSI/Plessey Length 1, Length 2 Programming Instructions 1. Scan the ST AR T bar code. 2. Scan either the Set Length 1 or S et Length 2 bar code. 3. T urn to Appendix C , Alpha-Numer ic P ad and scan the three digits (zero padded) r epresent- ing the length in decimal notation. 4. Scan the ...

  • PSC 1400I - page 137

    MSI/Plessey Product Reference Guide 5-61 MSI/Plessey — continued MSI/Plessey Stitching Enables/disables stitching for MSI/Plessey bar co des. When parts of an MSI/Plessey label are presented to the scanner with this feature enable d, the bar code par ts will be assembled by the scanner’ s software, and the data will be decoded if all bar code p ...

  • PSC 1400I - page 138

    Symbologies 5-62 Magellan ® 1400i MSI/Plessey — continued Minimum Reads This feature specifies the minimum number of co nsecutive times an MSI/Plessey label must be decoded before it is accepted as a good read. ST ART / END PROGRAMMING BAR CODES Minimum = 1 Read DEF A UL T Minimum = 2 Reads Minimum = 3 Reads Minimum = 4 Reads ...

  • PSC 1400I - page 139

    Standard 2 of 5 Product Reference Guide 5-63 Standard 2 of 5 The following options apply to the S tandard 2 of 5 symbology . Disable/Enable Standard 2 of 5 When this feature is disabled, the scanner will not read S t andard 2 of 5 bar codes. Check Digit Verification When enabled, the scanner will verify the check digit of the labels. ST ART / END P ...

  • PSC 1400I - page 140

    Symbologies 5-64 Magellan ® 1400i Standard 2 of 5 — continued Check Digit Transmit When this option is enabled, the scanner will transmit the check digit. ST ART / END PROGRAMMING BAR CODES Disable Chec k Digit T ransmission Enable Check Digit T ransmission DEF A UL T ...

  • PSC 1400I - page 141

    Standard 2 of 5 Product Reference Guide 5-65 Standard 2 of 5 — continued Length Control Fixed Length Decoding— Wh en fi xed le ng th de co di n g i s e na bl ed , t he sc an ne r w il l d e co de a bar code if the label length matches one of the configurable fixed lengths. Variable Length Decoding— When variable length decoding is enabled, th ...

  • PSC 1400I - page 142

    Symbologies 5-66 Magellan ® 1400i Standard 2 of 5 — continued Standard 2 of 5 Length 1, Length 2 Programming Instructions 1. Scan the ST AR T bar code. 2. Scan either the Set Length 1 or S et Length 2 bar code. 3. T urn to Appendix C , Alpha-Numer ic P ad and scan the three digits (zero padded) r epresent- ing the length in decimal notation. 4. ...

  • PSC 1400I - page 143

    Standard 2 of 5 Product Reference Guide 5-67 Standard 2 of 5 — continued Standard 2 of 5 Stitching Enables/disables stitching for S tandard 2 of 5 ba r codes. When parts of a Standar d 2 of 5 label are presented to the scanner with this featur e en abled, the bar code parts will be assembled by the scanner’ s software, and the data will be de c ...

  • PSC 1400I - page 144

    Symbologies 5-68 Magellan ® 1400i Standard 2 of 5 — continued Minimum Reads This feature specifies the minimum number of cons ecutive times a S tandard 2 of 5 label must be decoded before it is accepted as a good read. ST ART / END PROGRAMMING BAR CODES Minimum = 1 Read DEF A UL T Minimum = 2 Reads Minimum = 3 Reads Minimum = 4 Reads ...

  • PSC 1400I - page 145

    PDF417 Product Reference Guide 5-69 PDF417 The following options apply to the PDF417 symbology . Disable/Enable PDF417 When this feature is disabled, the scanner will not read PDF417 bar codes. PDF417 Minimum Reads This feature specifies the minimum number of consecutive times a PDF417 label must be decoded before it is accepted as a good read. ST ...

  • PSC 1400I - page 146

    Symbologies 5-70 Magellan ® 1400i PDF417 — continued Length Control Fixed Length Decoding— When fixed length decoding is enabled, the scanner will decode a bar code if the label length matches one of the configurable fixed lengths. Variable Length Decoding— When variable length decoding is enabled, the scanner will decode a bar code if the l ...

  • PSC 1400I - page 147

    PDF417 Product Reference Guide 5-71 PDF417 — continued PDF417 Length 1, Length 2 Programming Instructions 1. Scan the ST AR T bar code. 2. Scan either the Set Length 1 or S et Length 2 bar code. 3. T urn to Appendix C , Alpha-Numer ic P ad and scan the three digits (zero padded) r epresent- ing the length in decimal notation. 4. Scan the END bar ...

  • PSC 1400I - page 148

    Symbologies 5-72 Magellan ® 1400i Micro PDF417 The following options apply to the Micro PDF417 symbology . Disable/Enable Micro PDF417 When this feature is disabled, the scanner will not read M icro PDF417 bar codes. ST ART / END PROGRAMMING BAR CODES Disable Micro PDF417 DEF A UL T Enable Micro PDF417 ...

  • PSC 1400I - page 149

    Micro PDF417 Product Reference Guide 5-73 Micro PDF417 — continued Micro PDF 128 Emulation S pecifies which Label I.D. to use for Micro PDF labels when Code 128 or EAN128 emulation is active. •I f Micro PDF 128 Emulation is disabled, and AIM ID is enabled, and the scanner is perform- ing EAN128 or Code 128 emulation; the MicroP DF AIM I.D. type ...

  • PSC 1400I - page 150

    Symbologies 5-74 Magellan ® 1400i Micro PDF417 — continued Micro PDF417 Minimum Reads This feature specifies the minimum number of consecutive times a M icro PDF417 label must be decoded before it is accepted as a good read. ST ART / END PROGRAMMING BAR CODES Minimum = 1 Read DEF A UL T Minimum = 2 Reads Minimum = 3 Reads Minimum = 4 Reads ...

  • PSC 1400I - page 151

    Micro PDF417 Product Reference Guide 5-75 Micro PDF417 — continued Length Control Fixed Length Decoding— Wh en fi xed le ng th de co di n g i s e na bl ed , t he sc an ne r w il l d e co de a bar code if the label length matches one of the configurable fixed lengths. Variable Length Decoding— When variable length decoding is enabled, the scan ...

  • PSC 1400I - page 152

    Symbologies 5-76 Magellan ® 1400i Micro PDF417 — continued Micro PDF417 Length 1, Leng th 2 Programming Instructions 1. Scan the ST AR T bar code. 2. Scan either the Set Length 1 or S et Length 2 bar code. 3. T urn to Appendix C , Alpha-Numer ic P ad and scan the three digits (zero padded) r epresent- ing the length in decimal notation. 4. Scan ...

  • PSC 1400I - page 153

    Product Reference Guide A-1 Chapter A Product Specifications Optical and Read Performance Parameters Scanner Dimensions Parameter S pecification Scan V olume 80 cubic inches Scan P atter n 100 lines Scan Rate 1170 Digital Scan Lines/second Minimum Resolution 5 mil Depth of Field (100% UPC Labels) 0 ~ 8” Minimum Print Contrast Ratio 25% Skew (Y aw ...

  • PSC 1400I - page 154

    A-2 Magellan ® 1400i Physical Properties Electrical Parameters Environmental Parameters Other Parameters Parameter S pecification Dimensions (Scanner only): 66mm x 82mm x 154mm ( 2.6” x 3.23” x 6”) Dimensions (Scanner w/ Stand): 97mmx 82mm x 181mm (3.82” x 3.23” x 7.13”) Weight (Scanner) 9 oz. Weight (Base Station) 15.7 oz. Parameter S ...

  • PSC 1400I - page 155

    Product Reference Guide B-1 Chapter B Cable Pinouts Standard Cable Pinouts (Primary Interface Cables) RS-232 IBM Port 5B/9B/17 1 2C T S 3 4R T S 5R X D 6T X D 7 8 VCC IN 9G N D 10 1 2 3 4D A T A - 5 6D A T A + 7 8V C C _ I N 9G N D 10 Pin 1 10 Position RJ (Scanner End) Pin 1 10 Position RJ (Scanner End) ...

  • PSC 1400I - page 156

    Cable Pinouts B-2 Magellan ® 1400i IBM USB USB & USB Keyboard Wand Emulation Keyboard Wedge 1 2 3 4D - 5 6D + 7 8V I N 9G N D 10 1 2 3 4D - 5 6D + 7 8V B U S _ V I N 9G N D 10 1 2 3 W AND~ 4 5 6 7 8V C C _ I N 9G N D 10 1 2K B _ D A T A 3 A T_CLK 4K B _ C L K 5 6 A T_D A T A 7 8V C C _ I N 9G N D 10 Pin 1 10 Position RJ (Scanner End) Pin 1 10 ...

  • PSC 1400I - page 157

    Product Reference Guide C-1 Chapter C Alpha-Numeric Pad A B C D E F ...

  • PSC 1400I - page 158

    C-2 Magellan ® 1400i Alpha-Numeric Pad 1 2 3 0 9 8 7 6 5 4 ...

  • PSC 1400I - page 159

    Product Reference Guide D-1 Appendix D Default Settings Standard Feature Defaults The table immediately below lists the defaul t settings for the standar d RS-232 interface. Feature Std. RS-232 Setting Interface-Specific Exceptions Pag e # Double Read Timeout 0.6 Second 2-1 Label Gone Timeout 200 msec 2-4 Sleep Mode 10 minutes 2-5 Po w e r O n A l ...

  • PSC 1400I - page 160

    D-2 Magellan ® 1400i Obey/Ignore Host Commands Obey Host Commands 3-7 Host T ransmission Buff ers Buffers=2 IBM: Buffers=1 Wincor/Nixdorf: Buffers=1 3-8 Baud Rate 9600 Baud 3-9 Data Bits 8 Data Bits 3-10 Stop Bits 1 Stop Bit 3-10 Pa r i t y Parity=None Wincor/Nixdorf: Pa r i t y = O d d 3-10 Hardware Flo w Control Disable Wincor/Nixdorf: CTS Flow ...

  • PSC 1400I - page 161

    Standard Feature Defaults Product Reference Guide D-3 IBM T ransmit Labels in Code 39 F or mat —I B M : D i s a b l e 3-25 W and Emulation: Bar/Space P olar ity — W and Emulation: Bar/ Space = High/Low 3-27 W and Emulation: W and Idle State — W and Emulation: Low 3-27 W and Emulation: Signal Speed — W and Emulation: 660 msec 3-28 W and Emul ...

  • PSC 1400I - page 162

    D-4 Magellan ® 1400i Label ID Label ID P osition: Before Bar Code Data IBM: Disable K eyboard W edge: Disable 4-5 UPC-A Label ID A 4-6 UPC-A w/P2 Addon Label ID A 4-6 UPC-A w/P5 Addon Label ID A 4-6 UPC-A w/C128 Addon Label ID A 4-6 UPC-E Label ID E Wincor/Nixdorf: ‘C’ 4-6 UPC-E w/P2 Addon Label ID E 4-7 UPC-E w/P5 Addon Label ID E 4-7 UPC-E w ...

  • PSC 1400I - page 163

    Standard Feature Defaults Product Reference Guide D-5 GTIN w/P5 addon Label ID G5 4-8 GTIN w/C128 addon Label ID G6 4-9 RSS-14 Label ID R4 Wincor/Nixdorf: ‘E’ 4-9 RSS Expanded Label ID RX Wincor/Nixdorf: ‘E’ 4-9 Code 39 Label ID * 4-9 Pharmacode 39 Label ID A 4-9 Code 128 Label ID # Wincor/Nixdorf: ‘K’ 4-9 I 2 of 5 Label ID i Wincor/Nix ...

  • PSC 1400I - page 164

    D-6 Magellan ® 1400i In-store Minimum Reads 1 5-4 Disable/Enab le UPC-E Enable 5-5 Check Digit T ransmission Send Check Digit 5-5 Number System Digit Exclude Sys- tem Number 5-6 Expand to UPC-E to UPC-A Don’t Expand 5-6 Expand UPC-E to EAN13 Don’t Expand 5-7 UPC-E Minimum Reads 2 5-7 Disable/Enab le GTIN Disable 5-8 Expand UPC/EAN to GTIN Don? ...

  • PSC 1400I - page 165

    Standard Feature Defaults Product Reference Guide D-7 Optional 5-Digit Addons Disable 5-16 Optional Code 128 Add-ons Disable 5-16 Disable/Enab le RSS-14 Disable 5-17 RSS-14 UCC/EAN 128 Emulation Disable 5-17 RSS-14 Minimum Reads 1 5-18 Disable/Enab le RSS Expanded Disable 5-20 RSS ExpandedUCC/ EAN 128 Emulation Disable 5-20 RSS Expanded Length Cont ...

  • PSC 1400I - page 166

    D-8 Magellan ® 1400i Code 39 Minimum Reads 1 5-32 Disable/Enab le Phar- macode 39 Disable 5-33 Phar macode 39 Star t/ Stop Characters Don’t T ransmit 5-33 Phar macode 39 Check Char acter T ransmit Enable 5-34 Disable/Enab le Code 128 Enable 5-35 T ransmit UCC/ EAN128 labels in EAN 128 data f or mat Disable 5-35 Code 128 T ransmit Function Charac ...

  • PSC 1400I - page 167

    Standard Feature Defaults Product Reference Guide D-9 Disable/Enab le Coda- bar Disable 5-46 Codabar Check Char- acter V er ification Disable 5-46 Codabar Check Char- acter T ransmit Enable 5-47 Codabar Length Control Va r i a b l e Length 5-48 Codabar Length 1 3 5-49 Codabar Length 2 50 5-49 Codabar Quiet Zones Don’t Require 5-49 Codabar Star t/ ...

  • PSC 1400I - page 168

    D-10 Magellan ® 1400i Number of Check Characters 1 Check Character 5-58 MSI/Plessey Length Control Va r i a b l e Length 5-65 MSI/Plessey Length 1 4 5-60 MSI/Plessey Length 2 16 5-60 MSI/Plessey Stitching Disable 5-61 MSI/Plessey Minimum Reads 1 5-62 Disable/Enab le Standard 2 of 5 Disable 5-63 Std 2 of 5 Check Digit V er ification Disable 5-63 St ...

  • PSC 1400I - page 169

    Product Reference Guide E-1 Appendix E Keyboard Function Key Mappings Keyboard Model Cross Reference Ta b l e E - 1 summarizes the keyboard models, their defined protoc ol, scancode set, and some unique features. The remaining tables in this chapter pro vide the function key maps associated with each of the scancode sets. Table E-1. Keyboard Model ...

  • PSC 1400I - page 170

    E-2 Magellan ® 1400i Table E-2. Scanset 1 Function Key Map Table E-3. Scanset 2 Function Key Map ASCII (hex) ASCII code Key Scancode 00 NUL AL T ri ght Make E0h 38h 01 SOH AL T r ight Break E0h B8h 02 STX AL T left Make 38h 03 ETX AL T left Break B8h 04 EOT CTRL left Make 1Dh 05 ENQ CTRL left Break 9Dh 06 ACK CTRL right Make E0h 1Dh 07 BEL CTRL ri ...

  • PSC 1400I - page 171

    Keyboard Model Cross Reference Product Reference Guide E-3 Table E-4 . Scanset 3, 102-Key Function Key Map 18 CAN F3 04h 19 EM F4 0Ch 1A SUB F5 03h 1B ESC ESC 76h 1C FS F7 83h 1D GS F8 0Ah 1E RS F9 01h 1F US F10 09h ASCII (hex) ASCII code Key Scancode 00 NUL AL T right Make 39h 01 SOH AL T r ight Break F0h 39h 02 STX AL T left Make 19h 03 ETX AL T ...

  • PSC 1400I - page 172

    E-4 Magellan ® 1400i Table E-5. Scanset 3 122-Key Function Key Map ASCII (hex) ASCII code Ke y Scancode 00 NUL AL T Right Make 39h 01 SOH AL T Right Break F0h 39h 02 STX AL T left Mak e 19h 03 ETX AL T left Break F0h 19h 04 EO T CTRL left (RESET) Make only 11h 05 ENQ CTRL left (RESET) Mak e/Break 11h F0h 11h 06 A C K ONLINE Enter Make only 58h 07 ...

  • PSC 1400I - page 173

    Keyboard Model Cross Reference Product Reference Guide E-5 Table E-6. Japanese DOS Function Key Map ASCII value ASCII code Key Scancode 00h NUL AL T right Make 31h 01h SOH AL T r ight Break B1h 02h STX AL T left Make 31h 03h ETX AL T left Break B1h 04h EO T CTRL left Make 41h 05h ENQ CTRL left Break C1h 06h A CK CTRL right Make 41h 07h BEL CTRL rig ...

  • PSC 1400I - page 174

    E-6 Magellan ® 1400i Table E-7. NEC 9801-Key Function Key Map ASCII value ASCII code Key Scancode 00h NUL un used n/a 01h SOH CR 1Ch 02h STX CAPS LOCK ON (make) 71h 03h ETX CAPS LOCK OFF (break) F1h 04h EOT CTRL left Make 74h 05h ENQ CTRL left Break F4h 06h ACK CTRL-C 60h 07h BEL n/a n/a 08h BS BS 0Eh 09h HT T AB r ight 0Fh 0Ah LF RIGHT arrow (inn ...

  • PSC 1400I - page 175

    Product Reference Guide F-1 Chapter F Host Commands Accepting RS-232 Commands The scanner responds to the following RS-232 commands: If one of the abov e commands is received, the scanner will perform the steps indicated for the command. Host commands for other interfaces are also available. Contact T ech S upport for more details. COMMAND ASCII HE ...

  • PSC 1400I - page 176

    F-2 Magellan ® 1400i NOTES ...

  • PSC 1400I - page 177

    Product Reference Guide G-1 Chapter G Sample Symbols 0 1234567890 1234567890 Code 128 9 780330 290951 BC321 123456-9$ 123456 UPC-A Code 128 Code 39 Code 93 Interleav ed 2 of 5 EAN-13 Code 2 of 5 A13579B Codabar 05 ...

  • PSC 1400I - page 178

    G-2 Magellan ® 1400i Sample Symbols (01)00123456789012 RSS-14 0100123456789050 RSS Expanded ...

  • PSC 1400I - page 179

    ASCII Char t ASCII Char . Hex No . ASCII Char . Hex No . ASCII Char . He x No. ASCII Char . Hex No . NUL SOH STX ETX EO T ENQ ACK BEL BS HT LF VT FF CR SO SI DLE DC1 DC2 DC3 DC4 NAK SYN ETB CAN EM SUB ESC FS GS RS US 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F SP ! “ # $ % & ’ ( ) * + , - ...

  • PSC 1400I - page 180

    Asia P acific PSC Hong K ong Hong K ong T elephone: [852]-2-584-6210 F ax: [852]-2-521-0291 Au s t r a l i a PSC Asia P acific Pty Ltd. Nor th Ryde, A ustralia T elephone: [61] (2) 9870 3200 F ax: [61] (2) 9878 8688 France PSC S.A.R.L. LES ULIS Cedex, F rance T elephone: [33].01.64.86.71.00 F ax: [33].01.64 46.72.44 Germany PSC GmbH Darmstadt, Ger ...

Manufacturer PSC Category Scanner

Documents that we receive from a manufacturer of a PSC 1400I can be divided into several groups. They are, among others:
- PSC technical drawings
- 1400I manuals
- PSC product data sheets
- information booklets
- or energy labels PSC 1400I
All of them are important, but the most important information from the point of view of use of the device are in the user manual PSC 1400I.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals PSC 1400I, service manual, brief instructions and user manuals PSC 1400I. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product PSC 1400I.

Similar manuals

A complete manual for the device PSC 1400I, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use PSC 1400I by users. Manuals are usually written by a technical writer, but in a language understandable to all users of PSC 1400I.

A complete PSC manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual PSC 1400I - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the PSC 1400I, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the PSC 1400I, that we can find in the current document
3. Tips how to use the basic functions of the device PSC 1400I - which should help us in our first steps of using PSC 1400I
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with PSC 1400I
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of PSC 1400I in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning PSC 1400I?

Use the form below

If you did not solve your problem by using a manual PSC 1400I, ask a question using the form below. If a user had a similar problem with PSC 1400I it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)