English dropdown-ico

Manual Citizen CH-437C

30 pages 0.89 mb
Download

Go to site of 30

Summary
  • Citizen CH-437C - page 1

    - Eng 1- - Eng 1 - REF CH-437C INSTR UCTION MANU AL FOR DIGIT AL BLOOD PRESSURE MONITOR English Español Português Deutsch ...

  • Citizen CH-437C - page 2

    - Eng 2- - Eng 2 - General remarks on blood pressure and blood pressure measurement 1. If the cuff is to be deflated quickly, depress “POWER” switch. 2. The attached cuff is suited for an arm circumstance of 22 cm to 32 cm. 3. When attaching the cuff, the air hose should be placed on the inside of your arm on top of the arterial. 4. Self measur ...

  • Citizen CH-437C - page 3

    - Eng 3- English - Eng 3 - English GENERAL REMARKS 7. DO NOT try to measure blood pressure immediately after drinking coffee or tea or smoking. 8. Measure blood pressure with a relaxed and quiet posture. Keep the center of the cuff at the level of your heart, and DO NOT move your arm or talk. 9. DO NOT measure blood pressure after the cuff has been ...

  • Citizen CH-437C - page 4

    - Eng 4- - Eng 4 - Precaution for use 1. If you suffer from heart disease, high blood pressure or other circulatory disease, please consult your doctor first. 2. If you feel abnormal pressure of the cuff during use or any other irregularity, reduce the pressure by immediately switching off the power or remove the batteries and consult the sales out ...

  • Citizen CH-437C - page 5

    - Eng 5- English PRECAUTIONS FOR USE AND MAINTENANCE 14. If you use a cardiac pacemaker , consult your physician befor e using the monitor . 15. Be sure to use this unit only for measuring blood pr essure. DO NOT use it for any other purpose. 16. Be sure to use only our authorized parts and accessories. Parts and accessories not approved for use wi ...

  • Citizen CH-437C - page 6

    - Eng 6- PRECAUTIONS FOR USE AND MAINTENANCE Intended Use • This device is noninvasive blood pressur e monitor by oscillometric method. This device can measure the systolic blood pr essure (SYS), the diastolic blood pressur e (DIA) and the pulse rate automatically . • This device is intended to be used for checking personal health condition at ...

  • Citizen CH-437C - page 7

    - Eng 7- English PRECAUTIONS FOR USE AND MAINTENANCE Nature and fr equency of maintenance: This product is designed for use over an extended period of time; however , it is generally recommended that it be inspected every two years to ensure proper function and performance. Protect the natur e environment: Please help to protect natural environment ...

  • Citizen CH-437C - page 8

    - Eng 8- - Eng 8 - Air Hose sock et MEMOR Y switch POWER s witch Stand-by Battery compartment cover AC adapter socket Pocket (for storing arm cuff) Systolic blood pressure display section Diastolic blood pressure display section Pulse display section SYS DIA PULS /min. Arm cuff Air hose plug Air hose IDENTIFICATION OF PARTS ...

  • Citizen CH-437C - page 9

    - Eng 9 - English HOW TO LOAD BATTERIES Air hose plug AC adapter plug lock section draw push 1 Remove the plugs. Remove the air hose plug and AC adapter plug. 2 Remove the Pocket. While pressing the lock section on the bottom of the pocket, pull the pocket in the direction of the arrow. 3 Open the battery compartment cover. While pressing the lock ...

  • Citizen CH-437C - page 10

    - Eng 10 - HOW TO LOAD BATTERIES 4 Place the batteries in the compartment. Fit the batteries paying attention to the positive + and negative – terminals. * If the blood pressure monitor is left unused for an extended period of time, the batteries should be removed from the compartment. 5 Close the battery compartment cover. Fit the lugs of the co ...

  • Citizen CH-437C - page 11

    - Eng 11 - English HOW TO LOAD BATTERIES 6 Re-attach the pocket. Match the guides at the right and left sides of the pocket with those on the monitor body and slide the pocket till it clicks. 1 Remove the plug, pocket and battery compartment cover. ( See page 9 "HOW TO LOAD BATTERIES".) HOW TO UNLOAD THE BATTERIES ...

  • Citizen CH-437C - page 12

    - Eng 12 - 2 Remove each battery from top to bottom by lifting up its end, rotating it in the direction of the arrow with your fingertip. 3 Re-attach the battery compartment cover and the pocket. ( See page 9 "HOW TO LOAD BATTERIES".) • Replace the batteries with four new "AA" alkaline batteries when appears on the display, or ...

  • Citizen CH-437C - page 13

    - Eng 13- English USING AC ADAPTER (OPTION) 2 Plug the AC adapter into a mains power outlet. • If you plan to use the AC adapter for an extended period of time, remove the batteries. If the batteries are left in the compartment, electr olyte may leak from the batteries and cause a fault in the blood pressur e monitor . • When only batteries are ...

  • Citizen CH-437C - page 14

    - Eng 14- - Eng 14 - POINTS FOR ACCURATE MEASUREMENT Blood pressure varies with posture, the time of day or numerous other factors. It is recommended to measure blood pressure at the same time each day in the same posture. N Measurement in sitting posture 1 Place your arm on a table or similar surface stretching out the portion from the elbow to th ...

  • Citizen CH-437C - page 15

    - Eng 15 - English HOW TO WRAP THE ARM CUFF 1 Unroll the arm cuff. • When the arm cuff comes off, pass it through metal bar, directing the Velcro-attached side to the outer surface. 2 Put the arm cuff around your arm so that the air hose comes to the left palm side. • The arm cuff should be put on the bare arm or over a light-weight clothing. I ...

  • Citizen CH-437C - page 16

    - Eng 16 - 4 Draw the end of the arm cuff to fit it on the arm and secure with Velcro. • Carefully place the arm taking care to obtain adequate tightness, not too tight or loose. Adequate tightness is obtained when you can place a finger between the cuff and your arm. You may measure your blood pressure on your right arm. Adjust the arm cuff posi ...

  • Citizen CH-437C - page 17

    - Eng 17 - English HOW TO MEASURE YOUR BLOOD PRESSURE To get an accurate blood pressure measurement, you need to start by setting the pressure cuff on your arm to the correct starting pressure. The correct starting pressure level for you is your systolic blood pressure (the higher of your two blood pressure readings) plus 40 mmHg. You can select be ...

  • Citizen CH-437C - page 18

    - Eng 18 - HOW TO MEASURE YOU BLOOD PRESSURE 2 Insert the air hose plug into the case of the unit. 3 Sit in the recommended position. ( See page 14 "POINTS FOR ACCURATE MEASUREMENTS".) 4 Measure your blood pressure. Press to start inflating the cuff. You can select either the "AUTO" or "MANUAL" mode to set the correct ...

  • Citizen CH-437C - page 19

    - Eng 19 - English About 3 minutes after the last measurement was obtained, the power will be turned off, automatically. Automatic Power Off Function 5 After a measurement is obtained, press . The power will be turned off. 6 Store the arm cuff in the pocket. Wind the air hose around the arm cuff and store the cuff in the pocket. HOW TO MEASURE YOUR ...

  • Citizen CH-437C - page 20

    - Eng 20 - In this mode, the pressure in the cuff is raised to the correct level automatically, according to the previous measurement stored in memory, and your blood pressure is measured. 1 Press . The cuff is inflated immediately after the mark is turned on and then off. The starting pressure is set automatically, based on the last measurement ta ...

  • Citizen CH-437C - page 21

    - Eng 21 - English When your pulse is detected, the mark will blink and pressure will be shown in the Diastolic Blood Pressure readout. (Diastolic blood pressure is the lower number of your two blood pressure readings). After the measurement has been taken and recorded, the air inside the arm cuff will be released and the measurement results (Systo ...

  • Citizen CH-437C - page 22

    - Eng 22 - You can change the starting pressure setting by pressing the . 1 Press . The cuff starts to inflate. The pressure will continue to increase while the is pressed. 2 When the pressure indicator reaches the correct starting pressure for you, stop pressing the . Raise the pressure in the cuff manually to roughly your systolic blood pressure ...

  • Citizen CH-437C - page 23

    English - Eng 23 - The cuff pressure will be set the pressure value you decided when you stop pressing the , and the monitor will start measuring your blood pressure. • The starting pressure can be set between 160 and 280 mmHg manually. • If the level of the pressure is not enough, the pressure is automatically heightened to the level for measu ...

  • Citizen CH-437C - page 24

    - Eng 24 - * The data stored in memory cannot be called up during measurement. L Measurements stored in memory are assigned "a memory number" in the order of measurement and up to 7 measurements can be stored in the memory. When more than 7 measurements have been taken, the oldest measurement will be erased to make room for the recent ...

  • Citizen CH-437C - page 25

    - Eng 25 - English DISPLAY MARK CONDITION/CASE CORRECTIVE ACTION Pressure was insufficient. Appears when the blood pressure could not be measured accurately. Re-wrap the arm cuff snugly. Take another reading, making sure you remain still. ( See page 15 "HOW TO WRAP THE ARM CUFF". ) Appears when the pulse could not be measured accurately. ...

  • Citizen CH-437C - page 26

    - Eng 26 - The heart is a pump that circulates blood throughout your body. Blood is pumped from the heart at a constant pressure into arteries. This pressure is called the arterial blood pressure, which represents, in general, blood pressure. Blood pressure is indicated by several kinds of pressures such as: systolic pressure that occurs when the h ...

  • Citizen CH-437C - page 27

    - Eng 27 - English QUESTIONS AND ANSWERS ON BLOOD PRESSURE Q Why is the blood pressure measured at home different from that measured at the doctor or a hospital? A Blood pressure may vary with exercising, ambient temperature or me n t al s t at es . W he n yo u h ave a d o c to r o r nu r se m e a su re y ou r b lo o d pressure, the pressure value ...

  • Citizen CH-437C - page 28

    - Eng 28 - BEFORE ASKING FOR REPAIR/INSPECTION Be sure to check the following before sending your blood pressure monitor for repair/inspection. Calibration: The blood pressure measuring device is generally recommended to have the monitor inspected every two years to ensure correct functioning and accuracy. Please contact a distributor. ...

  • Citizen CH-437C - page 29

    - Eng 29- English Measurement system: Oscillometric method Display Digital Display Measuring Range Pr essure 0 to 280 mmHg (in 1 mmHg increments) Pulse 40 to 180 beats/min. Accuracy Pressure ±3 mmHg Pulse ±5% of reading In fl ation Automatic In fl ation by Internal Pump In fl ation setting Auto in fl ation setting (140 to 250 mmHg) Manual in ...

  • Citizen CH-437C - page 30

    CITIZEN is a registered trade mark o f Citiz en Holdings Co . , Ltd ., Japan Design and Spe ci fi cat ion a re su bje ct to c ha ng e wi tho ut n oti ce. 1202 ...

Manufacturer Citizen Category Blood Pressure Monitor

Documents that we receive from a manufacturer of a Citizen CH-437C can be divided into several groups. They are, among others:
- Citizen technical drawings
- CH-437C manuals
- Citizen product data sheets
- information booklets
- or energy labels Citizen CH-437C
All of them are important, but the most important information from the point of view of use of the device are in the user manual Citizen CH-437C.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Citizen CH-437C, service manual, brief instructions and user manuals Citizen CH-437C. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Citizen CH-437C.

Similar manuals

A complete manual for the device Citizen CH-437C, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Citizen CH-437C by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Citizen CH-437C.

A complete Citizen manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Citizen CH-437C - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Citizen CH-437C, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Citizen CH-437C, that we can find in the current document
3. Tips how to use the basic functions of the device Citizen CH-437C - which should help us in our first steps of using Citizen CH-437C
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Citizen CH-437C
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Citizen CH-437C in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Citizen CH-437C?

Use the form below

If you did not solve your problem by using a manual Citizen CH-437C, ask a question using the form below. If a user had a similar problem with Citizen CH-437C it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)