English dropdown-ico

Manual SOYO ATX 12V

97 pages 9.38 mb
Download

Go to site of 97

Summary
  • SOYO ATX 12V - page 1

    • Please read the users guide be fore proceeding with your inst allation s. Seriou s damage may occu r if the procedu re is not followed pr operly . • This moth erboard does not support CP Us with a Vcore highe r than 1. 6 volts. P lease make sure the CPU y o u are using 1.6 volts or bel ow . Che ck th e CPU sp ecif icat ion b efore you ins ert ...

  • SOYO ATX 12V - page 2

    SY -P4I865PE Plus DRAGON 2 Motherboard ************************** ************************** mPGA Socket 478 Processor supported Intel 865PE AGP/PCI 400/533/800 MHz Front Si de Bus supported A TX 12V Form Factor ************************** ************************** User's Manual ...

  • SOYO ATX 12V - page 3

    SOYO ™ SY -P4I865PE Plus DRAGON 2 iii Copyright © 2003 by Soyo Co mputer Inc. T rademarks: Soyo is the registered trademark of Soyo Computer Inc. All trademarks are the properties of their owners. Pr oduct Rights: All names of the produ ct and corporate mentioned in this publi cation are used for identification purposes only . The register ed tr ...

  • SOYO ATX 12V - page 4

    T able of Contents SY -P4I865PE Plus DRAGON 2 iv T able of Co ntents CHAPTER 1 MOTHERBOARD DESCRIPTION ......... ............ .......... 1 1-1 INTROD UCTION ......... ................................................... ............ 1 1-2 UNP ACKING THE MOTHERBOARD . ................ ............ .......... 1 1-3 KEY FEA TURES ......... ............ ...

  • SOYO ATX 12V - page 5

    T able of Contents SY -P4I865PE Plus DRAGON 2 v 3-4 ADV ANCED CHIPSET FEA TURES ... .............................. ........ 63 3-5 INTEGRA TED PERIPHERALS ....... ................ ............... .......... 65 3-6 POWE R MANAGEMENT SETUP . ..... .............................. ........ 71 3-7 PNP/ PCI CONFI GURA TION S ETUP. ..................... .. ...

  • SOYO ATX 12V - page 6

    H a rd w a re I n s t a l l a t i o n SY - P4I865PE Plus DRAGON 2 1 Chapter 1 MOTHERBOARD DESCRIPTION 1-1 INTRODUCTION The SY -P4I865PE Plu s DRAGON 2 AGP/PCI Moth erboard is a high-per formance Socke t 478 processor suppor ted A TX 12V form-fact or system board. SY -P4I865PE Pl us DRAGON 2 uses the Intel 865PE Chipset t echnology . This Motherboar ...

  • SOYO ATX 12V - page 7

    H a rd w a re I n s t a l l a t i o n SY - P4I865PE Plus DRAGON 2 2  One Back panel Wa r n i n g : Do not unpack th e Motherboa rd fr om its ant i-st atic packagi ng until you are rea dy to inst all it. Like most el ectronic equipment, your Mother board may be damaged by electrostatic discharge. T o avoid permanent dama ge to components ground y ...

  • SOYO ATX 12V - page 8

    H a rd w a re I n s t a l l a t i o n SY - P4I865PE Plus DRAGON 2 3 1-3 KEY FEA TURES CPU Supports Int el® mPGA S ocket 478 processors :  Pentium® 4 with and without Hyperthr eading, Northwood, Prescott (400/533/ 800MHz FSB)  Pentium® 4 Celeron  SOYO COMBO Setup CMOS setup menu for complete and easy ch anging of you r CPU settings in CM ...

  • SOYO ATX 12V - page 9

    H a rd w a re I n s t a l l a t i o n SY - P4I865PE Plus DRAGON 2 4 S torage  ICH5 integrated Se rial A T A controller supporting up to 2x UDMA 150 hard di sks  ICH5 Integrate d Parallel A T A controller supporting up to 4x UDMA 33/66/ 100 Paralle l A T A dev ices. USB 2.0 8 x USB 2.0 compl iant ports (4 on rear IO pane l, 4 x mother board co ...

  • SOYO ATX 12V - page 10

    H a rd w a re I n s t a l l a t i o n SY - P4I865PE Plus DRAGON 2 5 Wa r n i n g : Do not apply power if the Motherboard appears damaged . If the re is damage to t he board, cont act your dea ler immedi ately . 1-5 ELECTROST A TIC DISCHARGE PRECAUTIONS Make sure t o ground yoursel f befor e handling t he Mother board or other system compon ents. El ...

  • SOYO ATX 12V - page 11

    H a rd w a re I n s t a l l a t i o n SY - P4I865PE Plus DRAGON 2 6 1-6 SY -P4I865PE PLUS DRAGON 2 MOTHERBOARD LA YOUT Back Panel SY -P4I865PE Lite DRAGO N 2 Platform PS/2 K B Connector PS/2 Mou se PS/2 Mou se Connector PRT COM A COM B 13 2 1 SMCARD 14 15 16 2 1 GAM E PORT Aud io out / Fr ont ou t Aud io i n / Rear out MIC IN / Center & Bass ou ...

  • SOYO ATX 12V - page 12

    H a rd w a re I n s t a l l a t i o n SY - P4I865PE Plus DRAGON 2 7 1-7 SY -P4I865PE PLUS DRAGON 2 MOTHERB OARD COMPONENTS A BCDE F G H I J K L M N O P Q R S T U V W X Y Z AA AB AC AD AE ...

  • SOYO ATX 12V - page 13

    H a rd w a re I n s t a l l a t i o n SY - P4I865PE Plus DRAGON 2 8 A +12V Power Connec tor This is where the Power Supply's +12V A TX connector goes. For a lay-out of this connec tor ple ase check the F. A T X 1 2 V P o w e r Supply paragraph on page 3 5. B A TX Power Supply connector This connect or is to connect the A TX c onnector of your ...

  • SOYO ATX 12V - page 14

    H a rd w a re I n s t a l l a t i o n SY - P4I865PE Plus DRAGON 2 9 H CPU Cooling Fan (CPUF AN1) connectors W ith t hese connecto rs you can at t ach the CPU fan or fans to your motherboard. They supply power and (in the case of CPUF AN1) allow you to m onitor the speed of the F AN via the SOYO Hardware Monitor software or vi a CMOS setup. For more ...

  • SOYO ATX 12V - page 15

    H a rd w a re I n s t a l l a t i o n SY - P4I865PE Plus DRAGON 2 10 O Chassis Cooling Fan (CHA F AN1) connector This co nne cto r is to con nec t yo ur ch assis fan to yo ur mo therb oard. This mother board supports up to 2 chassis fans. It allows you to monitor the spee d of CHAF AN1 in CMOS setup or by usi ng the SOYO Hardware Monitor software. ...

  • SOYO ATX 12V - page 16

    H a rd w a re I n s t a l l a t i o n SY - P4I865PE Plus DRAGON 2 11 V GAMEPOR T co nnector This co nn ecto r is to at tach yo ur gameport connec tor t o. Gamepor ts are used to con nect for example joy sticks to. For more details check the par agraph on page 30. W Serial Infrar ed (IrDA) device header This header allows yo u to connect an IrDA rec ...

  • SOYO ATX 12V - page 17

    H a rd w a re I n s t a l l a t i o n SY - P4I865PE Plus DRAGON 2 12 AC AC97 Onboar d Au dio Chip AD Micr opho ne an d LAN S tatus LED Connec tor (J30) This connector allows you to extend your mi crophone conn ector and LAN Status LED to your front panel. Che ck the 6. MIC & LED Connector (J30) paragraph on page 34 fo r a lay- out of this heade ...

  • SOYO ATX 12V - page 18

    H a rd w a re I n s t a l l a t i o n SY - P4I865PE Plus DRAGON 2 13 Chapter 2 HARDW ARE INST ALLA TION Congratul ations on your pur chase of SY -P4I865PE P lus DRAGON 2 Motherboar d. Y ou ar e about to i nstal l and connect your new Motherbo ard. Note: Do not u npack the Mother board from its prot ective anti-s tatic pack aging until you have made ...

  • SOYO ATX 12V - page 19

    H a rd w a re I n s t a l l a t i o n SY - P4I865PE Plus DRAGON 2 14 2-2 IN ST ALLA TION GUIDE W e will now begin th e instal lation of th e Motherboar d. Plea se follow th e step-by-step p rocedure design ed to lead y ou to a co mplete and cor rect install ation. Step1- Install th e Central P rocessing Unit (CPU). Step2- Install memory modules. St ...

  • SOYO ATX 12V - page 20

    H a rd w a re I n s t a l l a t i o n SY - P4I865PE Plus DRAGON 2 15 2. Align th e blunt edge of the CPU wi th the mat ching pi nhole disti nctive edge on the socket. 3. Seat the processo r in the socket com pletely and without forcing . ...

  • SOYO ATX 12V - page 21

    H a rd w a re I n s t a l l a t i o n SY - P4I865PE Plus DRAGON 2 16 4. Th en close the sock et handle to se cure the CPU in p lace. Remember to co nnect the CPU Co oling Fan to the app ropriate power connector on the Motherboard. The fa n is a key component that will ensure syst em stability . The fan pr events overheating, ther efor e prolonging ...

  • SOYO ATX 12V - page 22

    H a rd w a re I n s t a l l a t i o n SY - P4I865PE Plus DRAGON 2 17 S tep 2 Install Memory Module This moth erboard suppor ts one Dual Channel t o your memory , Note that you can use normal DD R memory for D ual Channel to work. Also note that for Dual Channel to work 2 modules o f equal size and sp ecifications hav e to be installed . The largest ...

  • SOYO ATX 12V - page 23

    H a rd w a re I n s t a l l a t i o n SY - P4I865PE Plus DRAGON 2 18 Memory Configuration T able If you want to use the Dual Channel feature, pl ease foll ow the memory configur ation table be low: Instal ling your memor y in a combina tion di fferent from th e tabl e above wil l still a llow you r sy stem to work. The Dua l Ch anne l featu re w il ...

  • SOYO ATX 12V - page 24

    H a rd w a re I n s t a l l a t i o n SY - P4I865PE Plus DRAGON 2 19 S tep 3 Inst allation of Exp ansion Cards The mothe rboar d has 1 AGP sl ot and 5 PCI slots. 1. Re ad the related expa nsio n card’ s instruction document before inserting the expansi on card i nto the computer . 2. Press the expansion card fi rmly in to the expansion slo t in t ...

  • SOYO ATX 12V - page 25

    H a rd w a re I n s t a l l a t i o n SY - P4I865PE Plus DRAGON 2 20 S tep 4 Connect cables, case wire, and power supply A.IDE Device In stallation (HDD, CD-ROM) This Mothe rboard offers 1 primar y (IDE1) IDE device connecto rs, 1 secondary IDE devi ce connect ors ( IDE2) and 2 te rtiary serial A T A ports. IDE1 and I DE2 can support up to fo ur hi ...

  • SOYO ATX 12V - page 26

    H a rd w a re I n s t a l l a t i o n SY - P4I865PE Plus DRAGON 2 21 Note: I DE2 and SA T A2 ar e not boot able, SA T A1 and IDE1 are boot able. Note: Only W indows XP can use SA T A1, SA T A2, IDE1 and IDE2 at the same time. All other operating systems can u se any comb ination from the follo wing tab le: Parallel A T A connectors Connect the blac ...

  • SOYO ATX 12V - page 27

    H a rd w a re I n s t a l l a t i o n SY - P4I865PE Plus DRAGON 2 22 Serial A T A connectors Y ou ca n also plug t he seri al A T A cabl e into the serial A T A connector of the motherboar d. The other end of t he SA T A cable goe s into your SA T A device. Se r i a l AT A Seria l A T A Ca bl e Seria l A T A Conne ctor 1 Pi n 1 ...

  • SOYO ATX 12V - page 28

    H a rd w a re I n s t a l l a t i o n SY - P4I865PE Plus DRAGON 2 23 B. Floppy Drive Installation The system support s 5 possible fl oppy drive t ypes: 720 KB, 1.2 MB, 1. 44 MB, 2.88 MB. In addition, thi s Motherboard sup ports a 3-mode (720KB/1.2MB/ 1.44MB) floppy co mmonly use d in Japan. Connect one si de of the 34-pi n flat cable to th e floppy ...

  • SOYO ATX 12V - page 29

    H a rd w a re I n s t a l l a t i o n SY - P4I865PE Plus DRAGON 2 24 C. Front Pane l Connections Plug the c omputer case's front pa nel devi ces to t he correspondi ng hea ders on the Mothe rboard. 1. Power LED Please i nstall accordi ng to the f ollowi ng pin assi gnment: pi n 1, 3 are f or Power LED. Power LED Pin As signment VCC GND + _ NC ...

  • SOYO ATX 12V - page 30

    H a rd w a re I n s t a l l a t i o n SY - P4I865PE Plus DRAGON 2 25 2. Reset Plug t he Reset push-b utton c able in to the 2-pi n Reset hea der on t he Moth erboard. Push ing the R eset b ut ton o n the front pane l will caus e t he system to restar t the boot-up se quence. 3. Speaker Attach the 4-pin PC speaker cable from the case to the Sp eaker ...

  • SOYO ATX 12V - page 31

    H a rd w a re I n s t a l l a t i o n SY - P4I865PE Plus DRAGON 2 26 5. IDE LED Attach the 2-pin IDE device LED ca ble to the correspondi ng IDE LED header on the Motherboard. This will cause the LED to li ghten when an IDE1 o r IDE2 (HDD , CD-R OM) device is ac tive. 6. A TX Power On/Off Switch Atta ch the 2-pin moment ary type swit ch to the PWRB ...

  • SOYO ATX 12V - page 32

    H a rd w a re I n s t a l l a t i o n SY - P4I865PE Plus DRAGON 2 27 D. Back Panel Connections All external devices such as the PS/2 ke yboard, PS/2 mouse, printer , modem, USB can be plugged di rectl y into the Mot herboard bac k panel. Only af ter you have f ixed and l ocked the Motherboard to the comp uter case can you start conne cting t he ext ...

  • SOYO ATX 12V - page 33

    H a rd w a re I n s t a l l a t i o n SY - P4I865PE Plus DRAGON 2 28 1. Onboar d Serial Port s COMA/COMB External peripherals that use seri al transmission scheme include: - serial (RS232) mice - modem. Plug the se rial devi ce cable s directl y into t he COMA/COMB 9-pi n male connectors located at the rear p anel of the Motherboard . 2. Parallel P ...

  • SOYO ATX 12V - page 34

    H a rd w a re I n s t a l l a t i o n SY - P4I865PE Plus DRAGON 2 29 5. Univer sal Serial Bus (USB1/US B2, USB3/USB4, USB20_1/USB20_2) This Motherboard provides 8 USB 2.0 po r ts for your addit ional devices. Plug the USB device jack into the av ailable USB connector USB1, U SB2, USB3 and USB4. USB20_1 and USB20_2 are available. T o make use of the ...

  • SOYO ATX 12V - page 35

    H a rd w a re I n s t a l l a t i o n SY - P4I865PE Plus DRAGON 2 30 The Gameport has the following lay-out : E. Other Connections 1. S tandard Infrared (SIRCON) Plug the 5- pin inf rared devi ce cable t o the SIRCON header . This will ena ble the infr ared transf er functi on. This Motherboa rd meets bot h the ASKIR and HPSIR speci fications. Plea ...

  • SOYO ATX 12V - page 36

    H a rd w a re I n s t a l l a t i o n SY - P4I865PE Plus DRAGON 2 31 2. Coolin g Fan Install ation (1) CPU C ooling Fan (CPU F AN1) Afte r you have seat ed the CPU pr operly on t he processor , att ach the 3-pi n fan cable to the CPUF AN connector on the Mothe rboard. T o avoid damage t o the system, i nstall accor ding to the following pi n assign ...

  • SOYO ATX 12V - page 37

    H a rd w a re I n s t a l l a t i o n SY - P4I865PE Plus DRAGON 2 32 (2) Chassis Cooling Fan (CHAF AN1, CHAF AN2) Some chassis also feature a cooling fan. This Mother board features a CHAF AN connector to provide 12V powe r to the chassis fan. Connect the cable fr om the chassis f an to th e CHAF AN 3-pin connec tor . In stall accordi ng to the fol ...

  • SOYO ATX 12V - page 38

    H a rd w a re I n s t a l l a t i o n SY - P4I865PE Plus DRAGON 2 33 3. Smart Card Re ader The smart card reader confo rms to the PC/SC W orking gr oup standard, and has the following l ay-out: 4. CD Line-in (CDIN1) This Motherboard prov ides one CD-Line-in co nnectors. Pl ease connect the 4-pin audio c able from your CD- R OM or DVD ROM drive to C ...

  • SOYO ATX 12V - page 39

    H a rd w a re I n s t a l l a t i o n SY - P4I865PE Plus DRAGON 2 34 5. AUX-IN (AUXIN1) This Motherboard p rovides one AUX-IN conn ectors. Please connect the 4-pin audio cable from your second CD-ROM or DVD ROM drive to either AUX-IN. Please i nstall accor ding to the foll owing pin assignment : 6. MIC & LED Connector (J30) Y ou can connect the ...

  • SOYO ATX 12V - page 40

    H a rd w a re I n s t a l l a t i o n SY - P4I865PE Plus DRAGON 2 35 F . A T X12V Power S upply The power supp ly connector is the la st connect ion to be made whi le install ing a mother board. Thi s mother board re quires an A TX 12V power supply (For P4 system), and A T or A TX power suppl y cannot be use d. Note 1: The pr esence of the +12V pow ...

  • SOYO ATX 12V - page 41

    H a rd w a re I n s t a l l a t i o n SY - P4I865PE Plus DRAGON 2 36 3.3V -12V GN D PS -ON GN D GN D GN D -5V 5V 5V 3.3V 3.3V GN D 5V GN D 5V GN D PW- OK 5VS B 12V AT X P o w e r Note 3: The mini mum r ecommended w attage is 400W for a fully load ed syste m or 350W for a minimally loaded syste m, the system might become unstabl e if power supply is ...

  • SOYO ATX 12V - page 42

    H a rd w a re I n s t a l l a t i o n SY - P4I865PE Plus DRAGON 2 37 G . CMOS Cle ar (JP5) In some cases t he CMOS memory may contai n wrong data, f ollow the st eps below to c lear the CM OS memory . 1. Clear the CMOS memory by moment arily short ing pin 2-3 on jumpe r JP5. This jumper can be easily ide ntified by its white colored ca p. 2. Then p ...

  • SOYO ATX 12V - page 43

    H a rd w a re I n s t a l l a t i o n SY - P4I865PE Plus DRAGON 2 38 Onboard LAN LED Definition S tep 5 Power On Y ou have now complet ed the har dware i nstal lation of y our Mother boar d successfully . 1. T ur n the power on 2. T o enter the BIO S Setup Utility , pr ess the <DEL> key while the system is performing the diagnostic checks, No ...

  • SOYO ATX 12V - page 44

    H a rd w a re I n s t a l l a t i o n SY - P4I865PE Plus DRAGON 2 39 Repeat this operati on until you get the f ollowi ng screen. 3. Th e BIOS Setup screen ap pears: Phoenix – A ward BIOS CMOS Setup Utility  SOYO COMB O Featu re  PC Health Status  Standard C MOS Fe atur es Load Fail - Safe Defaults  Advanced BIOS Features Load Opti mi ...

  • SOYO ATX 12V - page 45

    H a rd w a re I n s t a l l a t i o n SY - P4I865PE Plus DRAGON 2 40 Step1. Select [ST AND ARD CMOS S ETUP] Set [Date/T ime] and [Floppy drive type], then set [Hard Disk T ype] to “Auto”. Step2. Select [LO AD OPTIMIZED DEF A UL TS] Select the “LOAD OPTIMIZED DEF AUL TS” menu and type “Y” at the pro mp t to lo ad the B IOS opt im al se t ...

  • SOYO ATX 12V - page 46

    BIOS Setup Utility SY - P4I865PE Plus DRAGON 2 41 Chapter 3 BIOS SETUP UTILITY This Mot herboard's BIOS setup progra m uses t he ROM PCI BI OS program from A ward Software Inc. T o enter the A ward BIOS pro gram 's Main Me nu: 1. Turn on or reboot the syst em. 2. After the diagnostic check s, press the [Del] k ey to enter the A ward BIOS ...

  • SOYO ATX 12V - page 47

    BIOS Setup Utility SY - P4I865PE Plus DRAGON 2 42 Hot Keys: Function keys give you a ccess t o a group of com mands throughout t he BIOS utility . Function Command Description F1 Gener al He lp Gives the list of opti ons available for each item. F5 Previ ous Va l u e s Restore the old values. These are the values that the user started th e current ...

  • SOYO ATX 12V - page 48

    BIOS Setup Utility SY - P4I865PE Plus DRAGON 2 43 SA VE AND EXIT SETUP Select the [SA VE & EXIT SETUP] option fro m th e M ain M enu to save data to CMOS and exit the set up utilit y . Th is opti on saves all your changes a nd causes the system to reboot. Ty p e [ Y ] t o s a v e t h e changes and exit or [N] to retu rn to th e Ma in Menu and k ...

  • SOYO ATX 12V - page 49

    BIOS Setup Utility SY - P4I865PE Plus DRAGON 2 44 3-1 SOYO CO MBO FE A TURE This moth erboard does not use any hardw are ju mper s to s et th e CPU frequency . Instead, CPU settings are soft ware configurable wit h the BIOS [SOYO COMBO Featur e]. After th e hardware ins t allatio n is comp lete, turn the power sw itch on , then press the <DEL> ...

  • SOYO ATX 12V - page 50

    BIOS Setup Utility SY - P4I865PE Plus DRAGON 2 45 System P erf ormance Setting Description Note Normal Default Fast System Performance Tu r b o Adjust your computer ’ s perform ance. SOYO COMBO Feature Setting Description Note CPU Clock Ratio 8X~ 50X The available CPU ra tio you can se lect will depends on your CPU ID. Manual CPU Fr equency Selec ...

  • SOYO ATX 12V - page 51

    BIOS Setup Utility SY - P4I865PE Plus DRAGON 2 46 SOYO C OMBO Fe ature (Contin ue) Setting Description Note Disabled Quick Power On Self T est Enabled P rovide s a fast POST at boot-up. Default Enabled C.I. H. 4 -W A Y Pr otection Dis able d This item allo ws y ou write -protect your BIOS chip. If you want to flash your BIOS , set this opt ion to d ...

  • SOYO ATX 12V - page 52

    BIOS Setup Utility SY - P4I865PE Plus DRAGON 2 47 3-1.1 Adv anced D RAM Control Caution: Change these se ttings on ly if you are already fa miliar with DRAM timi ng parame ters . The [Adv anced DRAM Control] option changes the values of the chip set registers. These registers co ntrol the timings of yo ur memory . Phoenix – A ward BIOS CMOS Setup ...

  • SOYO ATX 12V - page 53

    BIOS Setup Utility SY - P4I865PE Plus DRAGON 2 48 CHIPSET FEA TURES SETUP (Continue) Setting Descript ion Note 2 3 DRAM RAS# to CAS# Delay 4 This item allo ws you to control DRAM RAS to CAS delay time. Default 2 3 DRAM RAS# Precharge 4 This item allo w you to control DRAM RAS percharge time. Default 7.8 us 15.6 us 64 us Refr esh Mode Select Auto Th ...

  • SOYO ATX 12V - page 54

    BIOS Setup Utility SY - P4I865PE Plus DRAGON 2 49 3-1.2 On board Device The [Onboard De vice] opti on changes the values of the chipset regi sters. These registers con trol the system op tions in the co mputer . Phoenix – A ward BIOS CMOS Setup Uti lity Onboard Devic e AC97 Audio Auto LAN Chip Enabled Item He lp Menu Level   :Move Ent ...

  • SOYO ATX 12V - page 55

    BIOS Setup Utility SY - P4I865PE Plus DRAGON 2 50 3-1.3 OnChip IDE Device Caution: Change these set tings only if you are alr eady fami liar with th e IDE sett ings. The [OnChip IDE Devi ce] option changes t he settings of the 82801EB (ICH5) IDE controller . These settings do not influenc e the Hi ghPoint 372N or Sili con Image Sil 31 12 cont rolle ...

  • SOYO ATX 12V - page 56

    BIOS Setup Utility SY - P4I865PE Plus DRAGON 2 51 CHIPSET FEA TURES SETUP Setting Descri ption Note IDE only Only enabled IDE1,2. SA T A1,2 are disabled Defa ult SA T A only Only enable S A T A1,2. IDE1,2 are d isabled. Pri IDE+SA T A IDE1 and SA T A1,2 are enabled. IDE2 is disabled. SA T A+Sec IDE IDE2 and SA T A 1,2 are enable. IDE1 is disabled. ...

  • SOYO ATX 12V - page 57

    BIOS Setup Utility SY - P4I865PE Plus DRAGON 2 52 IDE Device Controls Setting Description Not e Disabled T urn o ff the on-bo ard IDE On-Chip PCI IDE  Primary  Secondar y Enable d Use the on -board ID E Defaul t mode 0-4 0 is the slowest speed 4 is the fastest speed IDE  Primary Master PIO  Primary S lave PIO  Second ary Mast er PIO ...

  • SOYO ATX 12V - page 58

    BIOS Setup Utility SY - P4I865PE Plus DRAGON 2 53 3-1.4 Boo t Device Order The [Boot De vice Or der] opti on allows you t o change t he order in which your system scans for de vices to boot fr om. Note : That SA T A 1 and SA T A 2 are not boot able. Phoenix – A ward BIOS CMOS Setup Uti lity Boot Device Order First Boot D evice Floppy Secon d Boot ...

  • SOYO ATX 12V - page 59

    BIOS Setup Utility SY - P4I865PE Plus DRAGON 2 54 System Boot Control Settings Setting Description Note Floppy LS120 IDE1/SA T A1 CDROM ZIP100 Other Device First /Sec ond/Thi rd Boot Device Dis able d Selects the order in which your system scans for devi ces to boot from (First th e first boot device, t hen the second, etc…). For booting from the ...

  • SOYO ATX 12V - page 60

    BIOS Setup Utility SY - P4I865PE Plus DRAGON 2 55 3-2 ST ANDARD CMOS SETUP Select the [ST ANDARD CMOS SETUP] opt ion fr om the Main Menu and press [Enter ] key . Phoenix – A ward BIOS CMOS Setup Uti lity St an d a r d C M O S F e a tu r e s Date (mm :dd:yy) Mon, Ma y 7 2003 Ti me ( h h : m m : s s ) 2 : 30 : 20 Item Help  IDE Primary Master No ...

  • SOYO ATX 12V - page 61

    BIOS Setup Utility SY - P4I865PE Plus DRAGON 2 56 Hard Disks T ype & Mode Choose the type and mode for the hard disks that you have alr eady install ed. Primar y (Second ary) Master & Slave Setting Description Note IDE HDD Auto-Detectio n Press Enter T o auto-detect t he HDD’ s si ze, head… on thi s channel Auto BIOS detects har d disk ...

  • SOYO ATX 12V - page 62

    BIOS Setup Utility SY - P4I865PE Plus DRAGON 2 57 Others Optional Setting Description Note EGA/VGA Default CGA 40 CGA 80 Vi d e o MONO (Monochr ome) Selec t the vid eo m ode. ALL Error s Default No Errors All, But Keyboard All, But D i skette Halt On All, But Di sk/Key When the BIO S detects system errors, this fun ction w ill stop the syste m. S e ...

  • SOYO ATX 12V - page 63

    BIOS Setup Utility SY - P4I865PE Plus DRAGON 2 58 3-3 ADV ANCED BIOS FEA TURES Select the [Adv anced BIOS Features] option fr om the Main Menu and press [Ente r] key . Phoenix – A ward BIOS CMOS Setup Uti lity Advanced BIOS F eatures Vi r u s Wa r n i n g Disabled CPU L 1 & L2 Ca che Enabled Item Help CPU L 2 Cac he EC C Che cki ng Enabled Bo ...

  • SOYO ATX 12V - page 64

    BIOS Setup Utility SY - P4I865PE Plus DRAGON 2 59 V irus W arning Setting Descriptio n Note Disabled Default V irus W arnin g Enabled Allows you to choose the VIRUS warning featu re for IDE Hard Disk boot s ector protecti on. If thi s functi on is enabled and someon e attempt to wr ite d ata in to this area , BIOS will show a warning message on scr ...

  • SOYO ATX 12V - page 65

    BIOS Setup Utility SY - P4I865PE Plus DRAGON 2 60 Boot Up NumLock St atus Setting Description Note On N umeric keypad in numeric mode at boot -up. Default Boot Up NumLock St a t u s Of f Puts numeric keyp ad in arrow key mode at boot-up. Gate A20 Opti ons Setting Descriptio n Note Normal A pin i n the keyboar d control ler controls G ateA2 0. Gate ...

  • SOYO ATX 12V - page 66

    BIOS Setup Utility SY - P4I865PE Plus DRAGON 2 61 Security Option Use this feature to p rev ent unaut horized syste m b oot-u p or use of BIOS Setup. The following table describes th e security setti ngs. Setting Descriptio n Note Setup If a password is set, the password prompt only appears when you attempt to enter the BI OS Setup p rogram . Defau ...

  • SOYO ATX 12V - page 67

    BIOS Setup Utility SY - P4I865PE Plus DRAGON 2 62 LOGO Show Setting Descriptio n Note Disabled Full Screen LOGO Show Enab led Set Enabled to Show Logo (DRAGON). Defa ult LOG0 Default EP A LOGO SELECT LOG1 Allows user to display SOYO logo or own logo. Logo-0 shows SOYO logo, Logo -1 shows user logo . Disabled Small Logo(EP A) Show Enable d Set Enabl ...

  • SOYO ATX 12V - page 68

    BIOS Setup Utility SY - P4I865PE Plus DRAGON 2 63 3-4 ADV ANCED CHIPSET FEA T URES Caution: Change these se ttings on ly if you are already fa miliar with the Ch ips et. The [Advance d Chipset Fe atures] opt ion changes the values of the chipset registers. These reg isters control the system op tions in the computer . Phoenix – A ward BIOS CMOS S ...

  • SOYO ATX 12V - page 69

    BIOS Setup Utility SY - P4I865PE Plus DRAGON 2 64 CHIPSET FEA TURES SETUP Setting Description Note Disabled Default System BIOS Cacheable Enab led The ROM area F0000H-FFFFFH is cacheable. Disabled Default Vi d e o B I O S Cacheable Enab led The video BIOS area at C0000H-C7FFFH is cach eable. 4Min 8Min 16Min Defa ult Dela y Prior to Thermal 32Min Se ...

  • SOYO ATX 12V - page 70

    BIOS Setup Utility SY - P4I865PE Plus DRAGON 2 65 3-5 INTEGRA TE D PERIPHERALS Caution: Change these se ttings on ly if you are already fa miliar with the Ch ips et. The [INTEGRA TED PERIPHERALS ] opti on changes the values of the chipset registers. These registers contro l the system options in the computer . The following screen show s setup defa ...

  • SOYO ATX 12V - page 71

    BIOS Setup Utility SY - P4I865PE Plus DRAGON 2 66 3-5.1 Onboa rd USB Device This [Onboar d USB Device] opti on chan ges the value s of the onboard USB controll er . The following screen show s setup default setti ng. Phoenix – A ward BIOS CMOS Setup Uti lity Onboard US B Devic e USB Controller Enabled  USB 2.0 Contr oller Enabled Item Help USB ...

  • SOYO ATX 12V - page 72

    BIOS Setup Utility SY - P4I865PE Plus DRAGON 2 67 3-5.2 Supe rIO Device Caution: Change these se ttings on ly if you r are already fa miliar with the Ch ips et. The [Sup erIO Device] option chan ges the values of the Sup er I/O controller . The following screen show s setup default setti ngs. Phoenix – A ward BIOS CMOS Setup Uti lity Super IO De ...

  • SOYO ATX 12V - page 73

    BIOS Setup Utility SY - P4I865PE Plus DRAGON 2 68 Others Optional Setting Descript ion Note Password Enables you to wa ke-up the system by entering a password on the keyboard. Hot KEY Y ou can wake-up the system by pressing t he key combinat ion of your choice ( Ctrl-F1~F12) . Mouse Move Mouse Click Any KEY Enables waking up the syst em by pressi n ...

  • SOYO ATX 12V - page 74

    BIOS Setup Utility SY - P4I865PE Plus DRAGON 2 69 Onb oard Seri al Po rts Setting Descriptio n Note Normal Default IrDA ASKIR UAR T Mode Select SCR The second serial p ort offe rs several special modes. It can either work as an infrared device (IrDA, ASKIR) or as a Smart Card reader (SCR), o r as a normal serial port. If [UAR T Mode Sele ct] is se ...

  • SOYO ATX 12V - page 75

    BIOS Setup Utility SY - P4I865PE Plus DRAGON 2 70 Others Optional Setting D escript ion Note On The system will switch on when power comes back after a power failure. Off The system will remain off when power comes back after a power failure. Defa ult PWRON After PWR-Fail Former -Sts The syste m wi ll retu rn to the state it was in before the power ...

  • SOYO ATX 12V - page 76

    BIOS Setup Utility SY - P4I865PE Plus DRAGON 2 71 3-6 POWER MA NAG EMENT SETUP The [POWER MANAG EMENT SETUP] se ts the system's power saving functions. Phoenix – A ward BIOS CMOS Setup Utility Power Mana gement Se tup ACPI Suspend T y pe S1(POS)  x Ru n VGAB IOS if S 3 R esum e Auto Power Management User Define Item He lp V ideo Off Metho ...

  • SOYO ATX 12V - page 77

    BIOS Setup Utility SY - P4I865PE Plus DRAGON 2 72 Power Management Controls Setting Description Note S1(POS) Default S3(STR) ACPI Su spend Ty p e S1 & S3 This item a llows yo u select suspend mode. Auto Default Ye s Run VGABIOS if S3 Resume No Some OS (win xp/ 2k) re quire to load VGABIOS afte r resume from S3. User Define Lets you defi ne the ...

  • SOYO ATX 12V - page 78

    BIOS Setup Utility SY - P4I865PE Plus DRAGON 2 73 Power Manageme nt Controls (Co ntinue) Setting Descript ion Note Disabled Defa ult HDD Power Down 1- 15Min When the set time has elapsed, BIOS sends a command to the HDD to power down. This turns of f the HDD moto r . Some older model HDDs may not support t his advanced function. Instant-of f T urns ...

  • SOYO ATX 12V - page 79

    BIOS Setup Utility SY - P4I865PE Plus DRAGON 2 74 Reload Global T imer Event s Setting Description Note Disabled Defa ult IDE0, IDE1  Primary  Secondary Enabled In ef fect, t he system remains alert for anything which occurs to a devic e which is c onfigured as Enabled . Disabled Defa ult FDD, COM, LPT Port Enabled In ef fect, t he system rem ...

  • SOYO ATX 12V - page 80

    BIOS Setup Utility SY - P4I865PE Plus DRAGON 2 75 3-7 PNP/PCI CONFIGUR A TION SETUP This option se ts the Mother board's PCI conf igurati on. Phoenix – A ward BIOS CMOS Setup Uti lity PnP/PCI Co nfiguration s Reset Configuration Data Disable d Item He lp Resources Controlled By Auto (ES CD) x IR Q Re source s Press Enter PCI/VGA Palette Snoo ...

  • SOYO ATX 12V - page 81

    BIOS Setup Utility SY - P4I865PE Plus DRAGON 2 76 PNP/PCI Config ur ation Co ntrols Setting Descript ion Note Disabled Retain PnP configuration data in BIOS. Default Rese t Confi gu ratio n Data Enabled Reset PnP c onfigurati on data in BIOS. Manual BIOS does not manage PCI/I SA P nP card IR Q a ssig nment. Required t o assign IRQ-# and DMA- # to P ...

  • SOYO ATX 12V - page 82

    BIOS Setup Utility SY - P4I865PE Plus DRAGON 2 77 PNP/PCI Config uratio n Setup (Continued) Setting Descript ion Note How to set the BIOS to r elease the IRQ to the PnP Interrupt pool: Interrupt Line PnP / PCI configuration Integrated Peripherals IRQ 15 IRQ 15: PCI / ISA PnP On-Chip Secondary PCI IDE: dis abled IRQ 14 IRQ 14: PCI / ISA PnP On-Chip ...

  • SOYO ATX 12V - page 83

    BIOS Setup Utility SY - P4I865PE Plus DRAGON 2 78 3-8 PC HEAL TH ST A TUS This option sets the Mother board's PC Health Status. Phoenix – A ward BIOS CMOS Setup Uti lity PC Health S tatus CPU Vcore 1.72 V Item Help +3.3V 3.21 V +5V 5.02 V +12V 1 1 . 7 7 V DRAM V olta ge 2.59 V AGP V oltage 1.53 V CPU T emperatur e 46° C / 1 14°F CHA T empe ...

  • SOYO ATX 12V - page 84

    BIOS Setup Utility SY - P4I865PE Plus DRAGON 2 79 3-9 LOAD F AIL-SAFE DEF AUL TS Select the [Load Fail-S afe Default s] option fr om the Main Menu t o load a pre-defined safe bios se ttings. This option is recommen ded if you have instability issues. Phoenix – A ward BIOS CMOS Setup Utility  SOYO COMB O Featu re  PC Health Status  Standa ...

  • SOYO ATX 12V - page 85

    BIOS Setup Utility SY - P4I865PE Plus DRAGON 2 80 3-10 LOAD OPT IMIZED DEF AUL TS Selec t the [Loa d Op timiz ed D efaults ] o ptio n from the M ain M enu to loa d the pre- defined opti mized BIOS setti ngs. Phoenix – A ward BIOS CMOS Setup Utility  SOYO COMB O Featu re  PC Health Status  Standard C MOS Fe atur es Loa d Fail - Safe Defa ...

  • SOYO ATX 12V - page 86

    BIOS Setup Utility SY - P4I865PE Plus DRAGON 2 81 3-11 SUPER VISOR P ASSWORD Based on the set ting you have made i n the [Securit y Option] of the [Advan ced BIOS Feature] section, the pa ssword prevents access to the system or the se tup progra m by unauthor ized use rs. Foll ow this procedur e to set a new passwor d or disable the password: 1. Ch ...

  • SOYO ATX 12V - page 87

    BIOS Setup Utility SY - P4I865PE Plus DRAGON 2 82 3. Enter your new pa ssword and press [Ent er]. The following message appears, prompti ng to confirm t he new password: 4. Re-ent er your password and t hen press [En ter] to exit to the Main Menu. This diag ram outlines the passwo rd selection proc edure: 3-12 USER P ASSWORD When the user passwor d ...

  • SOYO ATX 12V - page 88

    BIOS Setup Utility SY - P4I865PE Plus DRAGON 2 83 Boot Men u Boot Me nu enable s user to boot -up on dif fere nt bo ot devi ce wit hou t going into the BIOS setup. T o enable boot M enu, pr ess “ESC” af te r memory and opt ion ROM (li ke the HighPoint 3 72N BIOS) in itialization , the use r will see a device menu, in which he or she can choose ...

  • SOYO ATX 12V - page 89

    Drivers insta llation SY - P4I865PE Plus DRAGON 2 84 Chapter 4 DRIVER S INST ALLA TIO N The S OYO-CD wi ll Aut o Run on ly in Windows Bas ed Ope rating Systems. Y our SY -P4I 865PE Plus DRAGON 2 Mo therboard comes with a CD-ROM label ed “SOYO CD”. The SOYO CD cont ains a. The user ’ s manual for your new motherboard in PDF format, b. Th e dri ...

  • SOYO ATX 12V - page 90

    Drivers insta llation SY - P4I865PE Plus DRAGON 2 85 The user's ma nual f iles i ncluded o n th e SOYO CD are in PDF (Postscript Document Format) . In order t o read a PDF file, th e appropr iate Acrobat Reader software must b e in stalled in your system. Note : The S tart Up prog ram auto matically detec ts if the Acrobat Read er utilit y is ...

  • SOYO ATX 12V - page 91

    Drivers insta llation SY - P4I865PE Plus DRAGON 2 86 Step 2. Install Driver s and Ut ilities Highli ght the dri ver you want t o inst al l and then cl ick ok. The Start Up program di splays th e drivers a vailable for the partic ular model of Motherboar d you own. W e recommend t h at you onl y install those dr ivers Click the Install Drivers butto ...

  • SOYO ATX 12V - page 92

    Drivers insta llation SY - P4I865PE Plus DRAGON 2 87  C-MEDIA Audio Driver for Win 9x/ME/2000/NT/XP The driver support s 2/4/6 sp eake rs 3D positional audio.  P4I865PE DRAGON 2 hardwa re mo nitor for Win 9x/ME/2000/NT/ XP Y our motherboard comes w ith a hard ware mo nitoring IC. By installin g this utility T emperat ures, Fan spe eds and V o ...

  • SOYO ATX 12V - page 93

    Drivers insta llation SY - P4I865PE Plus DRAGON 2 88 After W indows XP install ation, your de vice manager shoul d look l ike th is: ...

  • SOYO ATX 12V - page 94

    Drivers insta llation SY - P4I865PE Plus DRAGON 2 89 After dri ver inst allation, your W indows XP device manager shoul d look like this: N ote: T o install the USB 2.0 drive r , pl ease upd ate t o W i ndows XP service pack 1. Check chapter 5 for more info. ...

  • SOYO ATX 12V - page 95

    Drivers insta llation SY - P4I865PE Plus DRAGON 2 90 Driv ers di rect ory li st i n the CD driv er ...

  • SOYO ATX 12V - page 96

    Inte l USB 2. 0 Dr iver In stalla tion SY - P4I865PE Plus DRAGON 2 91 Chapter 5 INTEL USB 2.0 DR IVER INST ALLA TION For Windows XP USB 2.0 drivers are available for d o wnload using Wi ndows Update for Windows XP. For addition al information reg ardi n g USB 2.0 suppo rt in Windows XP, pleas e visit ht tp://w ww .micro soft.c om/h wdev/b us/USB/de ...

  • SOYO ATX 12V - page 97

    Inte l USB 2. 0 Dr iver In stalla tion SY - P4I865PE Plus DRAGON 2 92 10.Choose [Se arch f or a suitab le driver for my device] . 11.Cli ck [Next]. 12.Choose [Sp ecif y a locati on] un der "Op tiona l searc h lo catio ns". 13.Cli ck [Next]. 14.Click [ Browse] to specify the file path where the dri ver is, e.g. "S OYO Dragon CD:USB2. ...

Manufacturer SOYO Category Power Supply

Documents that we receive from a manufacturer of a SOYO ATX 12V can be divided into several groups. They are, among others:
- SOYO technical drawings
- ATX 12V manuals
- SOYO product data sheets
- information booklets
- or energy labels SOYO ATX 12V
All of them are important, but the most important information from the point of view of use of the device are in the user manual SOYO ATX 12V.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals SOYO ATX 12V, service manual, brief instructions and user manuals SOYO ATX 12V. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product SOYO ATX 12V.

Similar manuals

A complete manual for the device SOYO ATX 12V, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use SOYO ATX 12V by users. Manuals are usually written by a technical writer, but in a language understandable to all users of SOYO ATX 12V.

A complete SOYO manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual SOYO ATX 12V - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the SOYO ATX 12V, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the SOYO ATX 12V, that we can find in the current document
3. Tips how to use the basic functions of the device SOYO ATX 12V - which should help us in our first steps of using SOYO ATX 12V
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with SOYO ATX 12V
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of SOYO ATX 12V in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning SOYO ATX 12V?

Use the form below

If you did not solve your problem by using a manual SOYO ATX 12V, ask a question using the form below. If a user had a similar problem with SOYO ATX 12V it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)