English dropdown-ico

Manual Maytag MGC6536

11 pages 0.8 mb
Download

Go to site of 11

Summary
  • Maytag MGC6536 - page 1

    SEALEDGAS COOKTOPS Models: MGC6430 & MGC6536 IMPORTANT: Dimensions Shown in Both Inches and Centimeters. IMPORTANT: Be sure the appliance being installed is equipped for the gas to be supplied. Refer to serial plate on underside of burner box for this information. Do not attempt to convert this appliance for use with a gas other than the type s ...

  • Maytag MGC6536 - page 2

    Location Of Your Maytag Appliance Locate this appliance away from combustible materials such as window curtains and combustible wall decorations. Minimum horizontal clearance between the edge of the appliance and combustible construction extending from the cooking surface to 18" (45.72 cm) above the cooking surface is: 1.0" (2.54 cm) at r ...

  • Maytag MGC6536 - page 3

    Check the cooktop serial plate to see if the cooktop is approved for installation in mobile homes and/or recreational park trailers. Serial plate is located on the bottom of the unit. If approved, the following items are applicable: Mobile Homes The installation of a range designed for mobile home installation must conform with the Manufactured Hom ...

  • Maytag MGC6536 - page 4

    Connecting Appliance To Gas Supply A QUALIFIED SERVICE TECHNICIAN OR GAS APPLIANCE INSTALLER MUST MAKE THE GAS SUPPLY CONNECTION. Leak testing of the appliance shall be conducted by the installer according to the instructions given. Gas supply piping MUST conform to all local, municipal and state building codes and local utility regulations. 1. IF ...

  • Maytag MGC6536 - page 5

    2. IF THIS UNIT WILL HAVE A MAYTAG MODEL MEW6500 or MEW5500 SERIES ELECTRIC WALL OVEN INSTALLED BELOW THIS COOKTOP. NOTE 1 : This appliance and its gas and electrical supply sources must be installed before the wall oven is installed. See illustration (Electrical Wiring Information - page 7; figure 6) for recommended electrical supply source locati ...

  • Maytag MGC6536 - page 6

    Alternative Piping Methods To Connect Appliance To Gas Supply A TRAINED SERVICE TECHNICIAN OR GAS APPLIANCE INSTALLER MUST MAKE THE GAS SUPPLY CONNECTION. Leak testing of the appliance shall be conducted by the installer according to the instructions given, Unless prohibited by local codes or ordinances, a new A.G.A. - Certified, flexible metal app ...

  • Maytag MGC6536 - page 7

    Electrical Wiring Information This appliance is equipped with a grounded type power cord. A grounded outlet must be provided. It is recommended, for convenience, the outlet be located (with reference to figure 6) as in A or B, below: A. If no other appliance is to be installed below this appliance: within either the shaded area or the cross hatched ...

  • Maytag MGC6536 - page 8

    Converting Appliance For Use With LP Gas WARNING Propane conversion is to be performed by a MAYTAG AUTHORIZED SERVICER (or other qualified agency) in accordance with the manufacturer's instructions and all codes and requirements of the authority having jurisdiction. Failure to follow instructions could result in serious injury or property dama ...

  • Maytag MGC6536 - page 9

    B. INVERT CAP IN APPLIANCE PRESSURE REGULATOR (See figure 11) With the appliance installed, the appliance regulator should be located as shown in figure 3, 4 or 5. CONVERSION OF APPLIANCE PRESSURE REGULATOR CONVERTE_ LP I _lr,A CAP I ND PIN . J NAT I .-"_ FIGURE 11 APPLY DOWNWARD FINGER PRESSURE AT DISC EDGES TO REPLACE PIN INCAR APPLY SIDEWAR ...

  • Maytag MGC6536 - page 10

    To Convert Appliance For Use With Natural Gas WARNING off Electrical power and gas must be turned prior to conversion. If this appliance has been converted for use with LP gas, each of the following modifications must be performed to convert the unit back to natural gas. A. REPLACE ALL ORIFICE SPUDS. 1. Perform Steps 1 and 2 on page 8. 2. Perform S ...

  • Maytag MGC6536 - page 11

    Burner Performance CAUTION: Never cover control knobs or surrounding control surface with utensils, towels, or other objects. Never obstruct free air passage past the control knobs. The knob openings have been sized to properly control air entry to the interior of the appliance during operation. This appliance has no air shutters. Primary air adjus ...

Manufacturer Maytag Category Cooktop

Documents that we receive from a manufacturer of a Maytag MGC6536 can be divided into several groups. They are, among others:
- Maytag technical drawings
- MGC6536 manuals
- Maytag product data sheets
- information booklets
- or energy labels Maytag MGC6536
All of them are important, but the most important information from the point of view of use of the device are in the user manual Maytag MGC6536.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Maytag MGC6536, service manual, brief instructions and user manuals Maytag MGC6536. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Maytag MGC6536.

Similar manuals

A complete manual for the device Maytag MGC6536, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Maytag MGC6536 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Maytag MGC6536.

A complete Maytag manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Maytag MGC6536 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Maytag MGC6536, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Maytag MGC6536, that we can find in the current document
3. Tips how to use the basic functions of the device Maytag MGC6536 - which should help us in our first steps of using Maytag MGC6536
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Maytag MGC6536
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Maytag MGC6536 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Maytag MGC6536?

Use the form below

If you did not solve your problem by using a manual Maytag MGC6536, ask a question using the form below. If a user had a similar problem with Maytag MGC6536 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)