-
Panasonic D610WA - page 1
P AJ- Operating Instructions Digital Camera/VTR ...
-
Panasonic D610WA - page 2
–2– For your safety The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dan- gerous voltage” within the product’s enclosure that may be of sufficient magnitude to consti- tute a risk of electric shock to persons. The exclamation point within an equilatera ...
-
Panasonic D610WA - page 3
–3– Contents Safety Precautions . . . . . . . . . . . . . . . . 2 General and Features . . . . . . . . . . . . . . 5 Á Features of the Camera Section . . . . . 5 Á Features of the VTR Section . . . . . . . 8 Á System Configuration . . . . . . . . . . . . . 9 Controls and Their Functions Á Power Supply Section . . . . . . . . . . . . . 10 Á ...
-
Panasonic D610WA - page 4
–4– Contents Adjusting the White Balance/Black Balance Á Adjusting the White Balance . . . . . . . . 70 Á Adjusting the Black Balance . . . . . . . . 75 Setting the Electronic Shutter Á Shutter Modes . . . . . . . . . . . . . . . . . . 77 Á Setting the Shutter Mode/Speed . . . . . 78 Á Setting the Synchro Scan Mode . . . . . 79 Á Changing ...
-
Panasonic D610WA - page 5
–5– General and Features This unit combines as a single integrated unit a 3-CCD color video camera which features IT- CCDs and a 520,000-pixel on-chip lens, and a DVCPRO format VTR which incorporates com- pression technology. In particular, the screen aspect ratio can be switched between 16:9 and 4:3 in a single action. The unit in itself is co ...
-
Panasonic D610WA - page 6
–6– Features Automatic adjustment and memory functions for black balance/white balance The black set, black balance and white balance can be automatically adjusted by simple switch operations. Adjustment values are held in the memory even if the power for the unit is turned off, so there is no need to readjust the balance each time the power is ...
-
Panasonic D610WA - page 7
–7– Features Audio functions Á A phantom power supply type super-cardioid microphone (option) can be attached and it can also be detached from the main unit for use in interviews. Á Microphone can also be connected, and can be attached to the main unit using the AJ-MH700P microphone holder (option). Á The audio CH1 recording level can be eas ...
-
Panasonic D610WA - page 8
–8– Features Features of the VTR section Digital system The VTR section features a component digital recording system that employs the latest compres- sion technology and non-compressed PCM recording for audio. This system provides superior S/ N, frequency band and waveform characteristics as well as reproduction of detailed areas, etc., and re ...
-
Panasonic D610WA - page 9
–9– System Configuration Multi connector cable SHAN-C12TCA Carrying case AJ-HT900 Microphone kit AJ-MC700P Shoulder belt Wireless microphone receiver WX-RA700 26P/12P output adaptor AJ-YA900P VTR cable VTR Microphone holder AJ-MH700P Lens (Bayonet type) Fujinon/Canon Camera/VTR AJ-D610WA Battery case SHAN-B220 Battery case AU-M402H Battery case ...
-
Panasonic D610WA - page 10
–1 0– Controls and Their Functions Power Supply Section e Battery holder The battery pack (option) made by Anton Bauer is mounted onto this holder. f DC IN (external power input) connector (XLR, 4P) The AJ-B75 AC adaptor (option) is plugged into this socket when the unit is to be operated by AC power. An external battery is plugged in when an e ...
-
Panasonic D610WA - page 11
–1 1– Accessory Mounting Section i Hook for mounting shoulder belt Attach the accessory shoulder belt to this hook. j Light shoe Mount the video light, etc. onto this shoe. k Lens mount (bayonet type) Mount the lens here. l Lens clamping lever Insert the lens into the lens mount k , and turn the lens mount ring using this lever to clamp the len ...
-
Panasonic D610WA - page 12
–1 2– Controls and Their Functions Audio Function Section (1) r AUDIO LEVEL CH1 (audio channel 1 recording level) control When the AUDIO SELECT CH1/CH2 switch u is set to MAN, the recording level of audio channel 1 can be adjusted by this control in addition to the AUDIO LEVEL CH1 control t on the side panel. s MIC IN (microphone input) jack (X ...
-
Panasonic D610WA - page 13
–1 3– Audio Function Section (2) | ALARM (warning tone volume) control This adjusts the warning tone volume heard from the speaker ~ or the earphone connected to the PHONES jack ¡ . When it is set to the lowest position, the warning tone is not audible. However, by making changes to the inside parts, the tone can be made audible even when the ...
-
Panasonic D610WA - page 14
–1 4– Controls and Their Functions Shooting (Recording)/Playback Function Section (1) ¢ Viewfinder (optional accessory) Black-and-white images can be seen in the viewfinder during recording and playback. Warn- ings and messages relating to the unit’s operating status and settings, zebra pattern, markers (safety zone marker, center marker), e ...
-
Panasonic D610WA - page 15
–1 5– Æ ß ¨ ™ ® ≠ ´ Shooting (Recording)/Playback Function Section (2) ‹ CC/ND FILTER (filter selector) knob This selects the filter to match the light source which is illuminating the subject. If the setting of this knob is changed when the menu display mode has been set to “3” (default setting), the new set ...
-
Panasonic D610WA - page 16
–1 6– Controls and Their Functions Shooting (Recording)/Playback Function Section (3) fl OUTPUT (output signal selector)/AUTO KNEE switch This switch selects the video signals which are to be output from the camera unit to the VTR unit, viewfinder and video monitor. The AUTO KNEE function can be used when the images shot by the camera have bee ...
-
Panasonic D610WA - page 17
–1 7– ‡ ECU REMOTE (remote control) connector (6-pin) Connect the AQ-EC1 extension control unit (option) here. | Note { The POWER switches on unit and extension control unit must be set to OFF before the remote control cable is connected or disconnected. · 26-pin/12-pin output adaptor (See page 104 for mounting method.) The 26-pin/12-pin out ...
-
Panasonic D610WA - page 18
–1 8– Controls and Their Functions Shooting (Recording)/Playback Function Section (4) • VTR START button When this pressed, recording commences; when it is pressed again, recording stops. This button has the same function as the VTR button on the lens side. ‚ VTR SAVE/STBY (tape protection) switch This selects the power supply status while ...
-
Panasonic D610WA - page 19
–1 9– … MARK button This is used when the Picture Link (Pix Link) F 1 function is to be used. Each time it is pressed M1 (MARK1), M2 (MARK2) or no display appears in the viewfinder. F 1 Picture Link adaptor board (AJ-YAP900) is sold as an option. ‰ EJECT (cassette eject) button Press this to insert or eject the cassette. ¾ REW (rewind) but ...
-
Panasonic D610WA - page 20
–2 0– Controls and Their Functions Menu Operation Section ˆ Setup card insertion slot The optional setup cards are inserted into this slot. ˜ MENU SET/OFF switch This displays the setting menu on the viewfinder screen through VIDEO OUT connector. SET: The page on which the previous setting menu operations were completed appears on the viewfin ...
-
Panasonic D610WA - page 21
–2 1– ˚ TC IN connector (BNC): The time code serving as the reference is input when the time code is locked to an external source. ¸ TC OUT connector (BNC): Connect this to the time code TC IN connector on the external VTR when locking the external VTR’s time code to this unit’s time code. Time Code-Related Section (2) Ì HOLD button The ...
-
Panasonic D610WA - page 22
–2 2– ÷ ◊ ÿ — ” “ ‘ ’ Controls and Their Functions Ñ TCG (time code selector) switch This is used to set the running mode of the internal time code generator. F-RUN: This position is used when the time code is to be advanced continuously regardless of the VTR’s operation. Set to this position when aligni ...
-
Panasonic D610WA - page 23
–2 3– ...
-
Panasonic D610WA - page 24
–2 4– Power Supply Using the Panasonic AU-BP402 Battery Pack 1 Detach the battery mounts. 2 Connect the unit’s connectors with the connectors of the AU-M402H battery case. 3 Mount the AU-M402H battery case. Open the battery case cover and lift up the rubber cap to expose the screw holes. Tighten the screws with a screwdriver and mount the cas ...
-
Panasonic D610WA - page 25
–2 5– 4 Connect the battery pack plug to the connector inside the case and insert the battery pack. | Note { The unit’s power must be set to OFF before the plug is inserted or removed. Power Supply ...
-
Panasonic D610WA - page 26
–2 6– Power Supply Using a Sony Battery Pack 1 Remove the battery mounts. See page 24. 2 Mount the accessory battery mounting connector. 3 Mount the Sony battery holder. Mount the battery case with the cover detached first, and then mount the detached cover as shown in the figure. A Tighten the mounting screws. B Tighten the power supply contac ...
-
Panasonic D610WA - page 27
–2 7– Using the Sony BP-90 Battery Pack 1 Mount the accessory battery mounting connector. (See the preceding page.) 2 Mount the BP-90 battery case. A Tighten the mounting screws. B Tichten the power supply contact screws. C Insert the top of the detached cover in the direction of the arrow. D Align the hole at the bottom (metal part) of the cov ...
-
Panasonic D610WA - page 28
–2 8– ...
-
Panasonic D610WA - page 29
–2 9– ¢ |{ GA I N M M M ASTE R G A I I I N : : : : 0d B 9d B dB HH D L 18 O G P CO O W GA I N GA I N BAT T ER Y SE L | ECT { RR | S ELE E CT T { BA BA T T ERY S S EL L CO OR R BA L d : NiC 1 2 Checking and Selecting the Type of Bat ter y To check the type of battery 1 Press the MODE CHECK button. While this button is held down, the type of ...
-
Panasonic D610WA - page 30
–3 0– Mounting the Lens 1 Raise the lens clamping lever and remove the mount cap. 2 Align the indentation at the top center of the lens mount with the center mark of the lens and mount the lens. 3 Lower the lens clamping lever and clamp the lens. 4 Press the cable into the cable clamp and connect it to the LENS connector. Á See the Handling In ...
-
Panasonic D610WA - page 31
–3 1– Adjusting the Lens Flange When images are not clearly focused at both the telephoto and wide-angle positions during zoom operations, adjust the flange back (the distance from the lens mounting surface to the image formation surface). Once adjusted, the flange back does not need to be readjusted as long as the lens is not changed. Adjustme ...
-
Panasonic D610WA - page 32
–3 2– ...
-
Panasonic D610WA - page 33
–3 3– 7 Set the WHITE BAL selector switch to A or B execute AWB. Next, execute ABB and then execute AWB again. 8 Repeat step 6. 9 Set the MENU switch from OFF to SET while holding down the SHIFT/ITEM and UP buttons to open the menu. Press the PAGE button until the MAIN menu screen 4 of 4 appears. Press the SHIFT/ITEM button to move the cursor t ...
-
Panasonic D610WA - page 34
–3 4– Adjusting the View finder Adjusting the Position 1 Lift up the viewfinder forward-backward/left/right position clamp lever to release the lock. 2 Adjust the position of the viewfinder in the forward-backward and left-right directions. 3 Tighten the viewfinder forward-backward/left-right position clamp lever to the locked position. Viewfin ...
-
Panasonic D610WA - page 35
–3 5– -3 -2 -1 0 +1 +2 +3 Adjusting the Viewfinder (The viewfinder shown in the illustration is the optional AJ-VF10P.) Adjusting the Diopter and Screen Adjusting the diopter 1 Set the POWER switch to ON. A picture will appear in the viewfinder. 2 Turn the diopter adjustment ring to adjust the diopter so that the viewfinder picture can be clear ...
-
Panasonic D610WA - page 36
–3 6– 1 2 Adjusting the View finder (The viewfinder shown in the illustration is the optional AJ-VF10P.) Detaching the Eyepiece Detaching the eyepiece allows the entire screen to be seen clearly even when shooting with your eye removed from the viewfinder. This also facilitates the removal of dust which has adhered to the CRT screen and mirror. ...
-
Panasonic D610WA - page 37
–3 7– Adjusting the Viewfinder (The viewfinder shown in the illustration is the optional AJ-VF10P.) Mounting the Viewfinder 1 Press down the viewfinder. 2 Tighten the viewfinder stopper screw firmly. If it is difficult to insert the screw, press down the viewfinder once again. 3 Connect the plug to the viewfinder connector and secure the viewfi ...
-
Panasonic D610WA - page 38
–3 8– Audio Input Preparations (The viewfinder shown in the illustration is the optional AJ-VF10P.) Using the Microphone Mounted to the Main Unit Using the accessory microphone (with holder), the AJ-MC700P microphone kit (option) micro- phone or the AJ-MH770P microphone holder (option) allows a microphone to be mounted to the main unit. Á See ...
-
Panasonic D610WA - page 39
–3 9– Audio Input Preparations (The viewfinder shown in the illustration is the optional AJ-VF10P.) Mounting the AJ-MH700P Microphone Holder (Option) 1 Remove the microphone holder mounting screws. 2 Mount the AJ-MH700P microphone adaptor (option) to the main unit. 3 Mount the microphone to the microphone holder and tighten the screws. 4 Connec ...
-
Panasonic D610WA - page 40
–4 0– ...
-
Panasonic D610WA - page 41
–4 1– ...
-
Panasonic D610WA - page 42
–4 2– Mounting the Unit to a Tripod When mounting the unit to a tripod, use the accessory tripod attachment. 1 Mount the tripod attachment onto the tripod. Select the attachment hole in consideration of the unit’s and tripod attachment’s center of gravity. In addition, check that the diameter of the selected hole matches the diameter of the ...
-
Panasonic D610WA - page 43
–4 3– ...
-
Panasonic D610WA - page 44
–4 4– ...
-
Panasonic D610WA - page 45
–4 5– ...
-
Panasonic D610WA - page 46
–4 6– ECU AQ OUTPUT GAIN WHITE BALANCE AUTO W/B BALANCE 9 0 -3 CAMERA TEST BAR A B PRE AWB ABB MANUAL AUTO (dB) SHUTTER PAINTING ON OFF ON 1/250 1/125 1/100 1/500 1/1000 1/2000 OFF ECU R B R B MASTER PEDESTAL IRIS ON OFF PAGE ITEM UP DWN ON SELECT CONTROL STORE SET UP GAIN BLACK - Connecting the AQ-EC1 Extension Control Unit (Option) Connecting ...
-
Panasonic D610WA - page 47
–4 7– Displaying Menus on the View finder Screen Displaying the Setting Menu Inside the Viewfinder The setting menus are displayed on the viewfinder screen when the MENU SET/OFF switch is set to the SET position. There are two types of setting menus, MAIN menus and SUB menus. Setting menus are displayed in 1-page increments. All the pages conta ...
-
Panasonic D610WA - page 48
–4 8– Checking and Selecting the Master Gain Set tings Checking and selecting the master gain setting 1 The menu shown in the figure below is displayed when the MENU SET ON/OFF switch is set to SET while the HOLD button is held down. 2 The current low, mid and high gain settings are displayed. 3 Press the SHIFT/ITEM button, and move the arrow ( ...
-
Panasonic D610WA - page 49
–4 9– Selecting the Color Bar Set ting Selecting the color bar setting 1 The menu shown in the figure below is displayed when the MENU SET ON/OFF switch is set to SET while the HOLD button is held down. 2 To select the color bar menu item, press the SHIFT/ITEM button, and move the arrow (cur- sor) to COLOR BAR. 3 Select the color bar setting by ...
-
Panasonic D610WA - page 50
–5 0– Checking the DIAGNOSTIC Screen Set ting 1 Set the MENU SET ON/OFF switch to SET while the HOLD button is held down. 2 Press the PAGE button. 3 The menu screen shown in the figure below appears, and it is now possible to check the DIAGNOSTIC screen settings. 4 To close the menu screen, return the MENU SET ON/OFF switch to OFF. DIA G N O S ...
-
Panasonic D610WA - page 51
–5 1– Displaying Menus on the View finder Screen Changing the setting menu configuration The setting menu can be configured by selecting only the pages necessary for the application. Pages are selected using the MENU SELECT page of the engineer menu mode. When using the engineer menu, switch the unit to engineer mode as described below. The uni ...
-
Panasonic D610WA - page 52
–5 2– SHIFT/ ITEM PAGE UP DOWN MENU CH 1 CH 2 TCG SET OFF F-RUN SET R-RUN MIC MIC AUDIO IN LINE ON OFF FRONT REAR CUE CH 1 MIX CH 2 REAR MIC POWER REAR MIC POWER Displaying Menus on the View finder Screen Basic Setting Menu Operations The setting menu is operated using the MENU SET/OFF switch and the SHIFT/ITEM, UP, DOWN and PAGE buttons. To di ...
-
Panasonic D610WA - page 53
–5 3– MA I N ME N U 1 / 4 ROP MA T R I X LO W SET T I N G SET T I N G SET T I N G SET T I N G MI D HIG H A D DITI O N A L D T L DT L SK I N TO NE KNEE / L EV E L F L A R E / GAM MA CA M ERA ¢ | ROP { M ASTE R M ASTE R M ASTE R PED p 003 µ 00 . 04 5 µ 000 µ 000 µ 000 µ 000 µ : : : : : : : : 000 DT L GAM M A RG A I N G ...
-
Panasonic D610WA - page 54
–5 4– ¢ | ROP { MA † STE R M A STER M A STER PED µ 00 . 04 5 µ 000 µ 000 µ 000 µ 000 µ 000 µ : : : : : : : : 000 DT L GAM MA RG A I N GA I N B R PEDE S T A L PEDE S T A L PEDE S T A L G B Displaying Menus on the View finder Screen Operations on SUB menus Selecting the desired item 1 Press the SHIFT/ITEM butt ...
-
Panasonic D610WA - page 55
–5 5– BA T T VTR S A V E ! REC 4 2 1 3 Lamp Displays Inside the View finder The viewfinder displays are as follows. 1. REC (recording) lamp This lamp lights (red) during recording, and flashes when warnings are issued. Á See “Warning System” (page 147, 148) for a detailed description. 2. BATT (battery) lamp When the battery voltage has dro ...
-
Panasonic D610WA - page 56
–5 6– !L E D { GA I N ( 0d B ) GA I N ( 3d B ) : O : OF N F O OF N F O OF N F OF F SHUT T ER : W H I T E PRESET : EXTE N D ER : FIL T E R : SUPER V : ¢ | ∂ Lamp Displays Inside the View finder Setting the ! Lamp display The items subject to the ! lamp display are selected on the “! LED” SUB menu page on the MAIN menu screen 2 of 4. ...
-
Panasonic D610WA - page 57
–5 7– Status Displays Inside the View finder Screen In addition to images, messages indicating the unit’s settings and operating status appear on the viewfinder screen. The center marker and safety zone marker, etc. are also displayed. When the MENU SET/OFF switch is set to OFF, items set to SET at the VF DISPLAY page of the setting menu and ...
-
Panasonic D610WA - page 58
–5 8– Status Displays Inside the View finder Screen 1 Extender display This is displayed when the lens extender is being used. 2 Shutter speed/mode display This displays the shutter speed or shutter mode setting. OFF (OFF is not displayed.): The shutter is not used. 1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000: Shutter speeds (seconds) during sta ...
-
Panasonic D610WA - page 59
–5 9– -40 -30 -25 -20 -15 -10 -5 0 E Status Displays Inside the View finder Screen 8 Audio level display This displays the audio CH1 level. During sine wave input, the audio level display corresponds roughly to the VTR level meter display as follows. 9 Iris value display This displays the approximate iris setting (F number). 10 Warning disp ...
-
Panasonic D610WA - page 60
–6 0– IN DIC A T O R { EXTE N D ER : : : : : : : : : : ON ON ON ON ON ON ON ON SHUT T ER TAPE BA T T ERY FIL T E R WH I T E GA I N LEVEL M ETE R C H1 IRIS S IRIS CA MERA I D VF ¢ | µ Status Displays Inside the View finder Screen Selecting Display Items The items which are to be displayed on the viewfinder screen can be selected by setti ...
-
Panasonic D610WA - page 61
–6 1– Status Displays Inside the View finder Screen Display Mode and Setting Change Message Messages informing of the contents of changed settings and adjustment results can be limited to part of the displayed items or not displayed for all items. The conditions under which messages are displayed and the corresponding display modes are shown in ...
-
Panasonic D610WA - page 62
–6 2– Status Displays Inside the View finder Screen Changing the Display Mode The display mode setting appears on the “VF DISPLAY” SUB menu page of MAIN menu screen 2 of 4. 1 Set the MENU SET/OFF switch to the SET position while the SHIFT/ITEM button and UP button are held down together. 2 Press the PAGE button to display the MAIN menu scre ...
-
Panasonic D610WA - page 63
–6 3– { CA MERA I D ID : ¢ | EEEEEEE E EE Status Displays Inside the View finder Screen Setting the Camera ID The camera ID can be set at the CAMERA ID page of the setting menu. A camera ID of up to ten characters including English letters, symbols and spaces can be used. The camera ID is recorded when the OUTPUT/AUTO KNEE switch is set to ...
-
Panasonic D610WA - page 64
–6 4– WIDE CH1 CH2 20 0 EMPHASIS dB 10 30 40 E TAPE F E BATT F RF SERVO HUMID SLACK DF SLAVE TCG HOLD h min s frm CH1 CH2 20 0 EMPHASIS dB 10 30 40 E TAPE F E BATT F RF SERVO HUMID SLACK DF SLAVE TCG HOLD WIDE h min s frm Display Remaining Battery Level and Audio Level Displays Audio CH level meter VTR Section Operation/Status-Related Displays ...
-
Panasonic D610WA - page 65
–6 5– WIDE CH1 CH2 20 0 EMPHASIS dB 10 30 40 E TAPE F E BATT F RF SERVO HUMID SLACK DF SLAVE TCG HOLD h min s frm Display Time Code-Related Displays Relationship between the TCG and DISPLAY switch setting positions and the time counter display The item displayed in the time counter display is determined by the TCG switch and DISPLAY switch sett ...
-
Panasonic D610WA - page 66
–6 6– Adjusting the Time and Date Adjustment and setup using the setting menu 1 Set the MENU SET/OFF switch to the SET position while the SHIFT/ITEM button and UP button are held down together. 2 Press the PAGE button to display the MAIN menu screen 3 of 4. 3 Press the SHIFT/ITEM button to move the cursor to the “TIME/DATE” position. 4 Pres ...
-
Panasonic D610WA - page 67
–6 7– Adjustments and Setup During Recording Adjustments and Setup Using the Setting Menu Adjustments and setup operations during recording are performed at the setting menu. Setting menu operations are basically performed according to the procedures described on page 52. However, these procedures vary slightly according to the item. Items whic ...
-
Panasonic D610WA - page 68
–6 8– Adjustments and Setup During Recording Setting the Gain Selector Value When shooting in locations without sufficient brightness, bright images can be obtained by raising the gain. However, care should be taken as raising the gain also increases the noise. The gain value for the image amplifier is selected by the GAIN switch. The gain valu ...
-
Panasonic D610WA - page 69
–6 9– Adjustments and Setup During Recording Selecting Functions The VTR’s operation functions can be selected on the “VTR FUNCTION” page of the setting menu. To select the required functions 1 Set the MENU SET/OFF switch to the SET position while the SHIFT/ITEM button and UP button are held down together. 2 Press the PAGE button to displ ...
-
Panasonic D610WA - page 70
–7 0– Adjusting the White Balance/Black Balance Adjusting the White Balance Adjusting the white balance and black balance in the order of AWB (white balance adjustment) > ABB (black balance adjustment) > AWB will provide a better picture. The black balance does not normally need to be readjusted even when the power is turned off and then ...
-
Panasonic D610WA - page 71
–7 1– Adjusting the White Balance/Black Balance 3 Place the white pattern over a location with the same conditions as the light source illuminat- ing the subject and zoom up to project white on the screen. A white object (white cloth, white wall) near the subject can also be used. The white area required is as shown below. 4 Adjust the iris of ...
-
Panasonic D610WA - page 72
–7 2– Adjusting the White Balance/ Black Balance 8 The messages shown in the figures below will be displayed if the color temperature of the subject is lower than 2500K or higher than 5600K. The down [ † ] arrow indicates a color temperature which is lower than the one displayed; conversely, the up [ ü ] arrow indicates a color temperature w ...
-
Panasonic D610WA - page 73
–7 3– Adjusting the White Balance/ Black Balance When the White Balance Cannot be Automatically Adjusted An error message will appear on the viewfinder screen. (The message appears when the display mode is set to “2” or “3”.) The displayed messages are as follows. Error messages related to white balance adjustment Error message COLOR TE ...
-
Panasonic D610WA - page 74
–7 4– Adjusting the White Balance/Black Balance When the ON setting has been selected for FILTER INH When the automatic white balance is adjusted, the color temperature and filter number at the time are displayed. When the filter is now turned, the new color temperature and filter number are displayed. The white balance is almost perfectly adju ...
-
Panasonic D610WA - page 75
–7 5– Adjusting the White Balance/Black Balance The black balance must be adjusted in the following cases. ¡ When the unit is used for the first time ¡ When the unit is first used after an extended period of non-use ¡ When the unit is used under conditions where the ambient temperature has changed by a wide margin ¡ When the gain selector v ...
-
Panasonic D610WA - page 76
–7 6– Adjusting the White Balance/Black Balance 4 Adjustment is completed after a few seconds (the following message appears) and the ad- justment value is automatically stored in the memory. | Notes { ¡ Check that the lens connector is connected and that the iris of the lens is set to CLOSE. ¡ During black balance adjustment, the iris automa ...
-
Panasonic D610WA - page 77
–7 7– Set ting the Electronic Shut ter Shutter Modes The shutter modes which can be used with the unit’s electronic shutter and the shutter speeds which can be selected are as follows. Shutter modes and shutter speeds which can be selected Mode Standard SYNCHRO SCAN SUPER V Shutter speed 1/100, 1/120, 1/250, 1/500, 1/1000 and 1/2000 (seconds) ...
-
Panasonic D610WA - page 78
–7 8– Set ting the Electronic Shut ter Setting the Shutter Mode/Speed ¡ The shutter speed during shutter mode and standard mode is set by the SHUTTER switch. ¡ During SYNCHRO SCAN mode, the shutter speed can be set beforehand at the SYNCHRO SCAN page of the setting menu. In the SYNCHRO SCAN mode, the shutter speed can easily be changed using ...
-
Panasonic D610WA - page 79
–7 9– Set ting the Electronic Shut ter Setting the Synchro Scan Mode 1 Set the MENU SET/OFF switch to the SET position while the SHIFT/ITEM button and UP button are held down together. 2 Press the PAGE button to display the MAIN menu screen 2 of 4. 3 Press the SHIFT/ITEM button to move the cursor to the “SYNCHRO SCAN” position. 4 Press the ...
-
Panasonic D610WA - page 80
–8 0– Set ting the Electronic Shut ter Changing the Shutter Speed/Mode Selection Range The shutter speed selection range can be limited to the required range and whether to use a special operation mode can be selected at the SHUTTER SPEED page of the setting menu. The unit is set so that the SHUTTER SPEED page is not displayed when shipped from ...
-
Panasonic D610WA - page 81
–8 1– Adjusting the Audio Level If the AUDIO SELECT CH1/CH2 selector switch is set to AUTO, the input levels of audio CH1 and CH2 are automatically adjusted. If are the level of audio channels 1 and 2 to be manually adjusted, perform the following operations. Manually Adjusting the Audio Level 1 Set the AUDIO SELECT CH1/CH2 selector switch to M ...
-
Panasonic D610WA - page 82
–8 2– Adjusting the Audio Level 4 Turn the AUDIO LEVEL CH1 control at the bottom of the front panel to adjust the input vol- ume so that the audio level display appears as shown below. ¡ When the input volume is normal, the audio level display turns ON up to the seventh of the eight level display bars from the left. ¡ When the rightmost (0 dB ...
-
Panasonic D610WA - page 83
–8 3– Set ting the Time Data Setting the Time Code When using both the user bit and the time code, set the user bit first. If the time code is set first, the time code generator will stop while the user bit is being set, causing the set time code to become inaccurate. The time code can be set within the range of 00:00:00:00 to 23:59:59:29. 1 Se ...
-
Panasonic D610WA - page 84
–8 4– Set ting the Time Data Setting the User Bit Setting the user bit allows up to 8 digits of hexadecimal data such as memos (date, time), etc. to be recorded in the sub code track. 1 Set the DISPLAY switch to UB. 2 Set the TCG switch to SET. 3 Select UB MODE on the “VTR FUNCTION” SUB menu page of MAIN menu 2 of 4. 4 Set the user bit usin ...
-
Panasonic D610WA - page 85
–8 5– Set ting the Time Data Locking the Time Code to an External Source The time code generator of the VTR section can be locked to an external generator. Example of connections for external locking Example 1: Locking the time code to an external signal Example 2: When a multiple number of AJ-D610WA units are connected with one unit serving as ...
-
Panasonic D610WA - page 86
–8 6– Set ting the Time Data This locks the built-in time code generator to the reference time code. After about 10 seconds have passed since the time code generator was locked, the external lock status is maintained even if the external reference time code is disconnected. However, if the reference time code is disconnected during recording (R ...
-
Panasonic D610WA - page 87
–8 7– Setup Card Operations Setting menu contents can be stored using setup memory cards (SHL-064HSRVS, option). This data can then be used to quickly recreate the appropriate setup conditions. Subject data, etc. can also be stored on setup cards. See the Setup Card Application Instructions for a detailed de- scription. ¡ Optional cards includ ...
-
Panasonic D610WA - page 88
–8 8– Setup Card Operations Setup Card Data Operations Operations to store setting data on setup cards and read out stored data are performed at the “CARD READ/WRITE” SUB menu page of MAIN menu screen 2 of 4. | Note { When operating the unit with a remote controller, the CARD READ/WRITE page cannot be oper- ated from the unit. Formatting se ...
-
Panasonic D610WA - page 89
–8 9– Setup Card Operations When data is not formatted If the following error messages appear when the UP button is pressed in step 7, the data is not formatted. Data format error messages Set the write protect switch on the side of the card to OFF. Insert a card. The card may be defective. Replace the card. Error message WRITE PROTECT NO CARD ...
-
Panasonic D610WA - page 90
–9 0– Setup Card Operations Writing set data to cards 1 Set the MENU SET/OFF switch to the SET position while the SHIFT/ITEM button and UP button are held down together. 2 Press the PAGE button to display the MAIN menu screen 3 of 4. 3 Press the SHIFT/ITEM button to move the cursor to the “CARD READ/WRITE” position. 4 Press the UP or DOWN b ...
-
Panasonic D610WA - page 91
–9 1– Setup Card Operations Protecting stored data If the setup card’s WRITE PROTECT switch is set to ON, data is not rewritten even if the UP button is pressed in step 7. When data is not written If the following error messages appear when the UP button is pressed in step 7, the data is not written. Data writing error messages Set to ON. For ...
-
Panasonic D610WA - page 92
–9 2– Setup Card Operations Reading out data stored on cards 1 Set the MENU SET/OFF switch to the SET position while the SHIFT/ITEM button and UP button are held down together. 2 Press the PAGE button to display the MAIN menu screen 3 of 4. 3 Press the SHIFT/ITEM button to move the cursor to the “CARD READ/WRITE” position. 4 Press the UP or ...
-
Panasonic D610WA - page 93
–9 3– Casset tes Inserting and Ejecting Cassettes Inserting cassettes 1 Check that there are no cables, etc. around the cassette holder and the top panel and then set the POWER switch to ON. If condensation has occurred inside the unit, the HUMID display lights. In these cases, wait until the display goes off before proceeding to step 2. 2 Pres ...
-
Panasonic D610WA - page 94
–9 4– Casset tes Ejecting cassettes With the power turned on, press the EJECT button to open the cassette holder and eject the cassette. If a cassette is not to be inserted immediately after ejecting the cassette, close the cassette holder. Ejecting cassettes when the battery has run out Set the POWER switch to OFF to turn off the power, then t ...
-
Panasonic D610WA - page 95
–9 5– Recording Basic Procedures This section describes the basic operating procedures for shooting and recording. When starting to shoot actual images, inspect the unit beforehand to check that all systems are functioning nor- mally. Á See the “Inspections Before Shooting” (page 151) for a description of inspection procedures. Procedures ...
-
Panasonic D610WA - page 96
–9 6– Recording Procedures from adjusting the white balance and black balance to stopping recording Turn on the power, insert a cassette, and then set the various switches as follows. Iris: AUTO AUDIO SELECT CH1/CH2: AUTO TCG: F-RUN or R-RUN OUTPUT: CAM/AUTO KNEE ON GAIN: Normally, set to 0 dB. When it is too dark, it is set to the appropriate ...
-
Panasonic D610WA - page 97
–9 7– Recording Shooting images 1-1 Select the filter in accordance with the lighting conditions, and when the white balance has already been stored in the memory, set the WHITE BAL switch to “A” or “B”. When the white balance and black balance have not been stored in the memory and there is no time to adjust the white balance: Set the ...
-
Panasonic D610WA - page 98
–9 8– Recording Successive Shooting Successive shooting with an accuracy of within 0 – o 1 frame can be performed simply by pressing the VTR START button of the unit or the VTR button of the lens while recording is paused. While recording is paused The unit automatically searches for the successive shooting point. However, the time until reco ...
-
Panasonic D610WA - page 99
–9 9– Recording Successive Shooting in Other Cases If successive shooting is to be performed after the tape has been run, the cassette has been ejected, or when using a tape which has only been recorded part-way, follow the procedures outlined below. 1 While monitoring the viewfinder screen, press the PLAY/PAUSE button to play back the tape. 2 ...
-
Panasonic D610WA - page 100
– 100 – Playback — Checking Recorded Contents Pressing the PLAY/PAUSE button allows black-and-white images to be viewed on the viewfinder screen. Playback images can also be viewed in two other ways. Á Rec review: When the RET switch has been set to “REC CHECK” on the “REC (ASPECT)/ RET” setting menu, it is possible to view the last ...
-
Panasonic D610WA - page 101
– 101 – Connection With an External VTR The unit is equipped with an interface which enables recording to be performed by an external VTR. Á Mounting the AJ-YA900P 26-pin/12-pin output adaptor (option) and connecting the 26-pin cable (option) to the unit allows recording to be performed by the VTR section (internal VTR) of the unit and an exte ...
-
Panasonic D610WA - page 102
– 102 – Recording Simultaneously with the Internal VTR and an External VTR Connections Mount the AJ-YA900P 26-pin/12-pin output adaptor (option) to the unit, connect the external VTR with the 26-pin cable, and set the audio input level selector switch of the external VTR to “ p 60 dB”. SW201 on the CAM ENC and SW1 (26PIN) on the CAM SYNC Pr ...
-
Panasonic D610WA - page 103
– 103 – Recording Simultaneously with the Internal VTR and an External VTR Functions of the Unit’s VTR SAVE/STBY Switch Tape running mode Pressing the unit’s STOP, REW or FF buttons sets the internal VTR to stop, rewind or fast forward modes, respectively. However, the external VTR is set to recording paused status in all cases. Viewing pla ...
-
Panasonic D610WA - page 104
– 104 – Recording With an External VTR Instead of the Internal VTR Using the 26-pin/12-pin Output Adaptor Connections The method of connecting the external VTR is the same as that described in “Recording Simulta- neously with the Internal VTR and an External VTR”. Á See “Connections” on page 101. Mounting the 26-pin/12-pin output adapt ...
-
Panasonic D610WA - page 105
– 105 – Recording With an External VTR Instead of the Internal VTR 2 Mount the 26-pin/12-pin output adaptor. Controlling the external VTR with the unit’s switches Setting the 26P CONTROL function as indicated below on the “VTR FUNCTION” SUB menu page of the MAIN menu screen 2 of 4 prevents the internal VTR from being operated and enables ...
-
Panasonic D610WA - page 106
– 106 – RET But ton The images recorded on the VTR or the return video signals which have been supplied to the GENLOCK IN/(VIDEO IN) connector can be viewed on the viewfinder screen either when the RET (return) button is pressed or while it is held down. What appears on the viewfinder screen differs as shown in the table below depending on the ...
-
Panasonic D610WA - page 107
– 107 – Replacing the Backup Battery The unit is shipped from the factory with a backup battery already mounted. When the battery runs out, the TCG time code value indicates 00:00:00:00. At this time, the time code value cannot be backed up. In addition, the “BACK UP BATT EMPTY” display appears in the viewfinder for 3 seconds when the POWER ...
-
Panasonic D610WA - page 108
– 108 – Set ting Menu Screens (MAIN menu) The MAIN menu consists of menus on four menu screens, 1 of 4 to 4 of 4. Each of these screens is a page screen for opening the sub menus. To open a SUB menu screen, press the SHIFT/ITEM button to select the SUB menu, and then press the UP or DOWN button. Press the PAGE button to return from a SUB screen ...
-
Panasonic D610WA - page 109
– 109 – Set ting Menu Screens (MAIN menu) MAIN menu screen 2 of 4 This screen displays the sub menu items on MAIN menu 2 of 4. SUB menu item VF DISPLAY VF INDICATOR CAMERA ID SHUTTER SPEED SYNCHRO SCAN !LED CAMERA SW MODE SUPER GAIN VTR FUNCTION BATT/TAPE ALARM VF display USER ENG USER ENG USER ENG USER ENG USER ENG USER ENG USER ENG USER ENG U ...
-
Panasonic D610WA - page 110
– 110 – Set ting Menu Screens (MAIN menu) MAIN menu screen 3 of 4 This screen displays the sub menu items on MAIN menu 3 of 4. SUB menu item CARD READ/ WRITE CARD R/W SELECT REC (ASPECT)/ RET MIC/ AUDIO GENLOCK/IRIS VIDEO OUT TIME/DATE LENS SEL/ADJ VF display USER ENG USER ENG USER ENG USER ENG USER ENG USER ENG USER ENG USER ENG Remarks Index ...
-
Panasonic D610WA - page 111
– 111 – Set ting Menu Screens (MAIN menu) MAIN menu screen 4 of 4 This screen displays the sub menu items on MAIN menu 4 of 4. | Note { It is not possible to open the MAIN menu screen 4 of 4 using the user menu. To open this screen, establish the engineer mode. MA I N ME N U 4 / 4 USER M ENU SE L 1 / 3 USER M ENU SE L 2 / 3 USER M ENU SE L 3 / ...
-
Panasonic D610WA - page 112
– 112 – Menu screen display methods USER menu: The USER menu appears when the MENU switch is set to SET. ENG menu: The ENG menu appears when the MENU switch is set to SET while the SHIFT/ITEM button and UP button are held down together. MAIN Menu Screen 1 of 4 (SUB menus) ROP screen The ROP (remote operation panel) settings are performed on thi ...
-
Panasonic D610WA - page 113
– 113 – | Note { The white balance and black bal- ance remain unchanged even when the MATRIX item settings are changed. The underlining in the variable range column indicates the setting in the preset mode. | Note { Two tables, A and B, can be stored for MATRIX TABLE. “00” is the setting for all the MATRIX TABLE B items in the preset mode. ...
-
Panasonic D610WA - page 114
– 114 – MAIN Menu Screen 1 of 4 (SUB menus) LOW SETTING screen The low level gain settings are performed on this screen. | Note { DARK DTL and LEVEL DEPEND serve opposite purposes: LEVEL DEPEND is automatically set to 0 when DARK DTL is set to a value other than 0 and, conversely, DARK DTL is automatically set to 0 when LEVEL DEPEND is set to a ...
-
Panasonic D610WA - page 115
– 115 – MAIN Menu Screen 1 of 4 (SUB menus) MID SETTING screen The middle level gain settings are performed on this screen. | Note { DARK DTL and LEVEL DEPEND serve opposite purposes: LEVEL DEPEND is automatically set to 0 when DARK DTL is set to a value other than 0 and, conversely, DARK DTL is automatically set to 0 when LEVEL DEPEND is set t ...
-
Panasonic D610WA - page 116
– 116 – MAIN Menu Screen 1 of 4 (SUB menus) HIGH SETTING screen The high level gain settings are performed on this screen. | Note { DARK DTL and LEVEL DEPEND serve opposite purposes: LEVEL DEPEND is automatically set to 0 when DARK DTL is set to a value other than 0 and, conversely, DARK DTL is automatically set to 0 when LEVEL DEPEND is set to ...
-
Panasonic D610WA - page 117
– 117 – MAIN Menu Screen 1 of 4 (SUB menus) ADDITIONAL DTL screen The special detail settings of the camera are performed on this screen. µ 00 µ 16 A D DITI O N A L CC O M P E . : : : : : : : : : OF F OF F O CHRO M A 0 KNEE A P ERT URE O N N SL I M CORN E R GA I N ( µ ) CL I P 0 0 H. L IN E M IX 1 H ¢ | DT L DT L DT L DT L DT L ...
-
Panasonic D610WA - page 118
– 118 – MAIN Menu Screen 1 of 4 (SUB menus) SKIN TONE DTL screen The camera’s skin tone detail settings are performed on this screen. Item SKIN TONE DTL SKIN TONE HUE SKIN TONE LEVEL SKIN TONE WIDTH SKIN TONE CORING SKIN TONE ZEBRA Variable range ON OFF 103 . . . 143 1 . . . 25 . . . 50 1 . . . 15 . . . 30 1 . . . 5 ON OFF Remarks This select ...
-
Panasonic D610WA - page 119
– 119 – MAIN Menu Screen 1 of 4 (SUB menus) KNEE/LEVEL screen The knee level settings of the camera are performed on this screen. The underlining in the variable range column indicates the setting in the preset mode. USER menu: The USER menu appears when the MENU switch is set to SET. ENG menu: The ENG menu appears when the MENU switch is set t ...
-
Panasonic D610WA - page 120
– 120 – Item R FLARE G FLARE B FLARE R GAMMA B GAMMA Variable range 0 . . . 100 0 . . . 100 0 . . . 100 p 15 . . . o 0 . . . o 15 p 15 . . . o 0 . . . o 15 VF display ENG ENG ENG ENG ENG MAIN Menu Screen 1 of 4 (SUB menus) FLARE/GAMMA screen The flare and gamma settings of the camera are performed on this screen. µ 00 µ 00 F L ARE F L A ...
-
Panasonic D610WA - page 121
– 121 – MAIN Menu Screen 2 of 4 (SUB menus) VF DISPLAY screen What information is to be displayed inside the viewfinder is set on this screen. Item DISP CONDITION DISP MODE SAFETY ZONE CENTER MARK VF OUT VF DTL Variable range NORMAL SPECIAL 1-3 OFF- 3-9 ON OFF Y NAM R G B 0 . . . 2 . . . 4 Remarks NORMAL: The statuses are displayed at all times ...
-
Panasonic D610WA - page 122
– 122 – MAIN Menu Screen 2 of 4 (SUB menus) Remarks This sets the ZEBRA1 detection level (IRE value). This sets the ZEBRA2 detection level (IRE value). This selects ON or OFF for ZEBRA2 and for setting SPOT. F The ZEBRA2 DETECT level should be set higher than the ZEBRA1 detect level when the SPOT setting is to be used. If it is set lower, ZEBRA ...
-
Panasonic D610WA - page 123
– 123 – Item EXTENDER SHUTTER TAPE BATTERY FILTER WHITE GAIN LEVEL METER IRIS CAMERA ID Variable range ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF CH1 CH1 Q CH2 OFF IRIS S o IRIS S OFF ON OFF Remarks This selects ON or OFF for the extender display. This selects ON or OFF for the shutter speed display. This selects ON or OFF for the remaini ...
-
Panasonic D610WA - page 124
– 124 – MAIN Menu Screen 2 of 4 (SUB menus) CAMERA ID screen The camera ID settings are performed on this screen. Each time the UP button is pressed, the character display changes in the following order: space ( ≈ ) > english letters (A to Z) > numbers (0 to 9) > symbols (space, >, <, ), (, ’, ‘, ,, – –, _, x , /, !). P ...
-
Panasonic D610WA - page 125
– 125 – Item GAIN (0 dB) GAIN ( p 3 dB) SHUTTER WHITE PRESET EXTENDER FILTER SUPER V Variable range ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF Remarks This selects whether the LED is to light up when the gain has a value other than 0 dB. This selects whether the LED is to light up when the gain has a value other than p 32 dB. This selects ...
-
Panasonic D610WA - page 126
– 126 – Item SUPER V FILTER INH SHOCKLESS AWB COLOR BAR S.GAIN OFF S.IRIS/ S.BLK SW S.BLK LVL ECU DATA SAVE Variable range FRM1 FRM2 ON OFF OFF NORMAL SLOW FAST SMPTE SNG S.GAIN L/M/H S.IRIS S.BLK INH p 10 p 20 p 30 ON OFF Remarks This selects ON or OFF for SUPER V. FRM1: Normal mode FRM2: Residual image reduction mode This switches whether the ...
-
Panasonic D610WA - page 127
– 127 – Item 30 dB 36 dB Variable range ON OFF ON OFF Remarks This selects the gain when the SUPER GAIN switch is pressed. This selects the gain when the SUPER GAIN switch is pressed. VF display ENG ENG MAIN Menu Screen 2 of 4 (SUB menus) SUPER GAIN screen The super gain values to be allocated to the SUPER GAIN switch are set on this screen. | ...
-
Panasonic D610WA - page 128
– 128 – Item HUMID OPE 26P CONTROL REC START TC MODE UB MODE PAUSE TIMER BATTERY SEL Variable range ON OFF OFF BOTH ON ALL NORMAL DF NDF USER DATE TIME EXT GPS F 10 20 30 60 NiCd12 NiCd13 NiCd14 IDXL-40 L-60 L-90 ANTON- D IDX-D Remarks This selects the VTR operation when condensation has formed. ON: Operation continues as usual. OFF: All operat ...
-
Panasonic D610WA - page 129
– 129 – Item TCG VF DISP TCG SET HOLD FIRST REC TC Variable range ON OFF ON OFF REGEN PRESET VF display ENG ENG ENG Remarks This selects ON or OFF for time code display in the viewfinder. ON: The time code is displayed. OFF: The time code is not displayed. This selects the TCG operation when operation is performed in the following sequence: TCG ...
-
Panasonic D610WA - page 130
– 130 – Item BATT NEAR END BATT END TAPE NEAR END TAPE END Variable range ON OFF ON OFF ON OFF ON OFF Remarks This selects ON or OFF for the warning beeps heard when the battery charge is nearly depleted. This selects ON or OFF for the warning beeps heard when the battery charge is depleted. This selects ON or OFF for the warning beeps heard wh ...
-
Panasonic D610WA - page 131
– 131 – Item READ SELECT WRITE SELECT CARD CONFIG READ USER DATA Variable range ...
-
Panasonic D610WA - page 132
– 132 – Item ID READ/WRITE MENU-1/4 LEVEL R/W MENU-1/4 SW ( » ) R/W MENU-2/4 ALL R/W MENU-3/4 ALL R/W Variable range ON OFF ON OFF ON OFF ON OFF ON OFF Remarks This selects ON or OFF for recording and loading the camera ID during setup card read/write operations. (See F ) ON: Recording/loading is enabled. OFF: Recording/loading is disabled. Th ...
-
Panasonic D610WA - page 133
– 133 – MAIN Menu Screen 3 of 4 (SUB menus) REC (ASPECT)/RET screen The recording, playback and return functions are set on this screen. Item REC MODE RET SW Variable range 16 E 9/25M 4 E 3/25M REC CHECK CAM RET MARK F Remarks This selects the mode for recording on the VTR. 16 E 9/25M: (16:9) signals are recorded using the 25 Mbps format. 4 E 3 ...
-
Panasonic D610WA - page 134
– 134 – Item FRONT POWER FRONT MIC REAR MIC CH1 REAR MIC CH2 LINE CH1/CH2 REAR AUDIO MIC LOWCUT CH1 MIC LOWCUT CH2 Variable range ON OFF p 40/ p 50/ 60 dB p 40 / p 50 / p 60 dB p 40 / p 50 / p 60 dB o 4/0/ p 6 dB STEREO MONO FRONT REAR F&R OFF FRONT REAR F&R OFF Remarks ON: The phantom power is supplied to the front microphone. OFF: The ...
-
Panasonic D610WA - page 135
– 135 – | Notes { ¡ The LIMITER item initiates the limiter operation at a level equivalent to 3 dB below the peak ( o 18 dB). ¡ The AUDIO SELECT initiates the limiter operation at the MAN setting and the AGC operation at the AUTO setting. The underlining in the variable range column indicates the setting in the preset mode. USER menu: The USE ...
-
Panasonic D610WA - page 136
– 136 – Item GENLOCK H PHASE COARSE H PHASE FINE SC PHASE COARSE SC PHASE FINE A.IRIS LEVEL A.IRIS PEAK/ AVE A.IRIS MODE S.IRIS LEVEL Variable range EXT INT 0 . . . 7 . . . 15 0 . . . 128 . . . 255 0 . . . 3 0 . . . 128 . . . 255 0 . . . 50 . . . 100 0 . . . 50 . . . 100 NORM1 NORM2 CENTR 0 . . . 100 Remarks This sets the cyclical signal of the ...
-
Panasonic D610WA - page 137
– 137 – : L ENS N O R M L ENS AD J { AD J AD J F 2.8 F16 ¢ | SE L / C S ELE : OF F : OF F T T I M E / D ATE YEAR : : : : : 99 M O NTH 0 1 DAY 0 1 HOUR 0 0 MI N U T E 00 T I M E / D ATE » SET { ¢ | { VID E O VID E O OU T OU T S E L : : ENC CHARACT ER O N ¢ | Item VIDEO OUT SEL CHARACTER Variable range MONI ENC ON OFF Remarks This ...
-
Panasonic D610WA - page 138
– 138 – { USER M ENU SE L 1 / 3 E ROP . . . . . . . . . MA T R I X LO W SET T I N G SET T I N G SET T I N G SET T I N G MI D HIG H A D DITI O N A L D T L DT L S K I N TO NE KNEE / L E V E L F L A R E / G AM MA CA MERA ¢ | MAIN Menu Screen 4 of 4 (SUB menus) USER MENU SEL 1 of 3 screen The menu page displays are set to ON or OFF on this scre ...
-
Panasonic D610WA - page 139
– 139 – CA MERA CA MERA E VF VF D I S PLAY E IN DIC A T O R E ID . SH UT T ER SPEE D E S Y NCHRO SCAN . !L E D . S W MO D E . SUPER G A I N . V T R F UNC T I ON . BAT T / T APE A L AR M { USER M ENU SE L 2 / 3 ¢ | Item VF DISPLAY VF INDICATOR CAMERA ID SHUTTER SPEED SYNCHRO SCAN !LED CAMERA SW MODE SUPER GAIN VTR FUNCTION BATT/TAPE ALARM Va ...
-
Panasonic D610WA - page 140
– 140 – E CARD R CARD R EA D / W / W RI T E . E . . . . . SE L SE L ECT M IC/ A U DI O G E N L O C K/ IRI S VID E O O U T TI M E/ D / ATE L ENS AD J { USER M ENU SE L 3 / 3 ¢ | REC ( ASPECT ) /R E T Item CARD READ/ WRITE CARD R/W SELECT REC (ASPECT)/ RET MIC/AUDIO GENLOCK/IRIS VIDEO OUT TIME/DATE LENS SEL/ADJ Variable range ON OFF ON OFF ON ...
-
Panasonic D610WA - page 141
– 141 – EV A LU AT I O N { S/N O F F OF F OF F OF F MO D U L A T I ON TI O N RE SOL U SENS I T I V I T Y : : : : ¢ | Item BLACK WHITE BLACK COMPE WHITE COMPE Variable range —— —— ON OFF ON OFF Remarks This initiates AUTO BLACK SHADING. This initiates AUTO WHITE SHADING. This selects ON or OFF for the black shading compensation. This ...
-
Panasonic D610WA - page 142
– 142 – S/N D ETA I L : : : : H ∂ FC O M P O F F : : OF F ON OF F OF F GAM MA MA T R I X F L ARE F OF : : M. P E D µ 00 VID E O O U T Y ¢ EV A LU AT I O N |{ MAIN Menu Screen 4 of 4 (SUB menus) S/N measurement screen The settings for the signal-to-noise ratio measurement are performed on this screen. Item S/N DETAIL H-F COMP GAMMA ...
-
Panasonic D610WA - page 143
– 143 – MAIN Menu Screen 4 of 4 (SUB menus) Modulation measurement screen The settings for the modulation measurement are performed on this screen. The underlining in the variable range column indicates the setting in the preset mode. USER menu: The USER menu appears when the MENU switch is set to SET. ENG menu: The ENG menu appears when the ME ...
-
Panasonic D610WA - page 144
– 144 – MAIN Menu Screen 4 of 4 (SUB menus) Resolution measurement screen The settings for the resolution measurement are performed on this screen. Item RESOLUTION DETAIL H-F COMP GAMMA MATRIX FLARE M.PED VIDEO OUT Variable range ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF p 99 . . . o 0 . . . o 99 ENC Y R G B Remarks This selects ON or OFF for t ...
-
Panasonic D610WA - page 145
– 145 – MAIN Menu Screen 4 of 4 (SUB menus) Sensitivity measurement screen The settings for the sensitivity measurement are performed on this screen. Item SENSITIVITY KNEE W.CLIP M.PED VIDEO OUT Variable range ON OFF ON OFF ON OFF p 99 . . . o 0 . . . o 99 ENC Y R G B Remarks This selects ON or OFF for the sensitivity measurement. This selects ...
-
Panasonic D610WA - page 146
– 146 – MAIN Menu Screen 4 of 4 (SUB menus) INITIALIZE screen The MENU display item settings are reset on this screen. Align the arrow ( > ) with the item and press the UP or DOWN button to initiate the corresponding operation. | Note { The camera ID, GENLOCK, CARD R/W SELECT and TIME/DATE are not returned to the factory setting. DIAGNOSTIC ...
-
Panasonic D610WA - page 147
– 147 – Warning System If trouble is detected immediately after the power is turned on or during operation, the display window (LCD), WARNING lamp, lamps inside the viewfinder, and warning tones from the speaker and earphone inform the operator of trouble. Item ...
-
Panasonic D610WA - page 148
– 148 – Warning System Item TAPE END BATTERY END No display Display window (LCD) Warning contents Warning display The tape is nearing its end. The tape has reached its end. The battery has almost run out. The battery has run out. REC status error between SYSCON and DV. Warning display status Remain- ing battery level display Remain- ing tape le ...
-
Panasonic D610WA - page 149
– 149 – ...
-
Panasonic D610WA - page 150
– 150 – Cleaning the Video Heads Use the AJ-CL12MP cleaning cassette when head cleaning is required. Improper use of the cleaning cassette may damage the video heads. Therefore, read the Handling Instructions for the cleaning tape carefully before use. Cleaning the Viewfinder Á Do not use thinner or other solvents to remove dirt from the viewf ...
-
Panasonic D610WA - page 151
– 151 – Inspections Before Shooting Perform the following inspections before shooting to check that all systems are operating prop- erly. Checking the image with a color monitor is recommended. Inspection Preparations 1 Insert a charged battery pack. 2 Set the POWER switch to ON and check that the HUMID display does not appear and that five or ...
-
Panasonic D610WA - page 152
– 152 – Inspections Before Shooting Inspecting the Viewfinder 1 Adjust the position of the viewfinder. 2 Check that the color bar appears on the viewfinder screen, and then adjust the BRIGHT, CONTRAST and PEAKING controls so that the color bar appears clearly on the viewfinder. 3 Check the following items. (1) Press the PAGE button, and check t ...
-
Panasonic D610WA - page 153
– 153 – Inspections Before Shooting Inspecting the Iris and Zoom Functions 1 Set the zoom to electric zoom mode and check the electric zoom operation. Check that the image changes to telephoto and wide angle. 2 Set the zoom to manual zoom mode and check the manual zoom operation. Turn the man- ual zoom lever and check that the image changes to ...
-
Panasonic D610WA - page 154
– 154 – Inspections Before Shooting (2) Inspection of Audio Level Automatic Adjustment Functions 1 Set the AUDIO SELECT CH1/CH2 switch to AUTO. 2 Set the AUDIO IN CH1/CH2 switch to FRONT [MIC]. 3 Aim a microphone connected to the MIC IN jack at an appropriate sound source and check that the level display for both CH1 and CH2 changes in accordan ...
-
Panasonic D610WA - page 155
– 155 – Specifications General Operating temperature: 32 u F to 104 u F (0 u C to 40 u C) Storage temperature: p 4 u F to 140 u F ( p 20 u C to 60 u C) Operating humidity: Less than 85% (relative humidity) Continuous operating time: Approx. 90 min. (using 1 Anton Bauer Trimpac 14 battery) Weight: 14.52 lbs (6.6 kg) (incld. main unit, viewfinder ...
-
Panasonic D610WA - page 156
– 156 – Specifications VTR Section VTR Video System (during playback on a standard playback unit) Bands: Y; 30 Hz to 5.75 MHz o 1.0 dB/ p 3.0 dB S/N ratio: 55 dB K factor (2T pulse): Within 2% Y/C delay: Within 30ns VTR Audio System (during playback on a standard playback unit) Sampling frequency: 48 kHz (synchronized to video) Quantization: 16 ...
-
Panasonic D610WA - page 157
– 157 – Specifications Related Components Power supply related AU-BP220, AU-BP402 battery packs AG-B425 battery charger (for charging AU-BP220, AU-BP402 battery packs) AU-M402H battery case AJ-B75 AC adaptor Viewfinder AJ-VF10P, AJ-VF15P 1.5-inch viewfinders AJ-VF20WP 2.0-inch viewfinder AJ-VF53P 5-inch viewfinder External VTR-related Portable ...
-
Panasonic D610WA - page 158
PANASONIC BROADCAST & DIGITAL SYSTEMS COMPANY DIVISION OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA Executive Office: 3330 Cahuenga Blvd W., Los Angeles, CA 90068 (323) 436-3500 EASTERN ZONE: One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7621 Mid-Atlantic/New England: One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7621 Southeast R ...
Do you have a question concerning Panasonic D610WA?
Use the form below
If you did not solve your problem by using a manual Panasonic D610WA, ask a question using the form below. If a user had a similar problem with Panasonic D610WA it is likely that he will want to share the way to solve it.