English dropdown-ico

Manual NHT X2

12 pages 1.27 mb
Download

Go to site of 12

Summary
  • NHT X2 - page 1

    X2 Active Crossover Now Hear This 6400 Goodyear Road Benicia, CA 94510 800-NHT -9993 OWNER’S MANUAL ...

  • NHT X2 - page 2

     Specifications X2 Active Crossover Frequency response: 15Hz - 220Hz +/-3dB through L/R input (continuously variable) 15 - 220Hz +/-3dB through LFE input (fixed) 50, 80, 1 10Hz-100KHz +/-3dB Distortion: < 0.01% subwoofer output @ 100Hz, 1V < 0.001% hi-pass output @ 1KHz, 1V Signal to noise ratio: >105dB at Hi-pass output >100dB at su ...

  • NHT X2 - page 3

     Block Diagram and Schematic Below is a block diagram of the X2 crossover . This may be useful when integrating the X2 into your system. A schematic of the X2 is available on our website at www .nhthifi.com. This may be useful if you wish to modify any of the filter characteristics in the X2. This is only recommended for users with the correct t ...

  • NHT X2 - page 4

    Line Output Line Input Line Input Line Input Line Input Speaker Outputs Speaker Outputs Speaker Outputs Speaker Outputs ++++ ++ + + ---- -- - - (Optional) L R A V Receive r or Surround P rocessor High High T ower L T ower R Low Low X2 Amplifier Amplifier Amplifier Amplifier Subwoofer Output T ower With S tereo Subwoofers ...

  • NHT X2 - page 5

    T ower With Mono Subwoofers Line Output Line Input Line Input Line Input Speaker Outputs Speaker Outputs Speaker Outputs ++ + ++ + + -- - -- - - (Optional) L R A V Receive r or Surround Processor High High T ower L T ower R Low Low X2 Amplifier Amplifier Amplifier Subwoofer Output ...

  • NHT X2 - page 6

     Satellite Subwoofer Systems The X2 can be used to crossover a mono or stereo subwoofer to a stereo satellite system as long as the desired crossover frequency falls into the 50 to 200Hz range. If using a mono subwoofer , three channels of amplification will be needed. If using a stereo subwoofer system, four channels of ampli- fication will be ...

  • NHT X2 - page 7

     X2 Active Crossover  Design The NHT X2 active crossover is designed to provide convenient front-p anel adjustment of the controls necessary to integrate one or two subwoofer(s) with a Left and Right satellite speaker or to biamp a 3-way tower loudspeaker . The unit has unbalanced RCA and balanced XLR inputs and outputs for connection with al ...

  • NHT X2 - page 8

    On the rear panel of the X2 is a 3-position switch that determines the trigger mode: 1) On; the X2 is always on. 2) Audio; the X2 will automatically turn on when it detects an audio signal and turn of f after 20 min- utes with no signal. 3) 12V Ext; the X2 is remotely turned on when it detects a DC control signal from another com- ponent in your sy ...

  • NHT X2 - page 9

    High Pass Filter Switch (Rear Panel) The High Pass Filter determines the range of frequencies that the main speakers ("satellites") will reproduce. For example, a high pass setting of 80Hz means that the main speakers receive a signal containing only frequencies above 80Hz. The 3-positon High Pass Filter is selectable between 50Hz, 80Hz, ...

  • NHT X2 - page 10

    Gain Switch (Rear Panel) The Subwoofer Gain switch allows you to increase the gain of the X2 subwoofer output by 10dB. Normally , the factory default "0" position will give you a wide range of volume adjustment. However , if the sensitivity of your satellite speakers is greater than 93dB, your range of volume adjustment on the X2 may be l ...

  • NHT X2 - page 11

     System S tatus Indicators (Front Panel) Located on the right hand side of the front panel are two LEDs. They are used to indicate the func- tional status of the X2 Crossover . P - Power LED (green) - indicates the X2 is on and in a ready condition. S - S tandby LED (amber) - indicates the X2 crossover is in "standby" mode. 8.5 Fine T ...

  • NHT X2 - page 12

    Limited W arranty V alid Only in the U.S.A. W arranty Period For the period of 5 years for part s and 5 years for labor from date of original purchase (the warranty period) from an author- ized NHT dealer , Now Hear This (NHT) warrants that if our product fails to function properly under normal use due to a man- ufacturing defect when installed and ...

Manufacturer NHT Category Music Mixer

Documents that we receive from a manufacturer of a NHT X2 can be divided into several groups. They are, among others:
- NHT technical drawings
- X2 manuals
- NHT product data sheets
- information booklets
- or energy labels NHT X2
All of them are important, but the most important information from the point of view of use of the device are in the user manual NHT X2.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals NHT X2, service manual, brief instructions and user manuals NHT X2. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product NHT X2.

Similar manuals

A complete manual for the device NHT X2, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use NHT X2 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of NHT X2.

A complete NHT manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual NHT X2 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the NHT X2, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the NHT X2, that we can find in the current document
3. Tips how to use the basic functions of the device NHT X2 - which should help us in our first steps of using NHT X2
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with NHT X2
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of NHT X2 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning NHT X2?

Use the form below

If you did not solve your problem by using a manual NHT X2, ask a question using the form below. If a user had a similar problem with NHT X2 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)