English dropdown-ico

Manual Supermicro X8STE

105 pages Not applicable
Download

Go to site of 105

Summary
  • Supermicro X8STE - page 1

    USER’S MANUAL Revision 1.2b X8ST3-F X8STE ...

  • Supermicro X8STE - page 2

    Manual Revision 1.2b Release Date: June 17, 2010 Unless you request and recei ve written permissio n f rom Super Micro Computer, Inc., you may not copy any part of this document. Information in this document is subject to change without notice. Other products and companies referred to h erein are tra demarks or r egistered trademark s of their resp ...

  • Supermicro X8STE - page 3

    Preface T h i s m a n u a l i s w r i t t e n f o r s y s t e m i n t e g r a t o r s , P C t e c h n i c i a n s a n d knowledgeable PC users. It provides information for the installation and use of the X8ST3-F/X8STE motherboard. About This Motherboard The X8ST3-F/X8STE supports the Intel ® Core™ i7 processor and Intel® Xeon® 5500/3500 series ...

  • Supermicro X8STE - page 4

    X8ST3-F/X8STE User ’s Manual Conventions Used in the Manual: Special attention should be given to the following symbols for proper installation and to prevent damage done to the components or injury to yourself: Danger/Caution: Instructions to be strictly followed to prevent ca tastrophic system failure or to avoid bodily injury W arning: Importa ...

  • Supermicro X8STE - page 5

    Contacting Supermicro v Contacting Supermicro Headquarters Address: Super Micro Computer , Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. T el: +1 (408) 503-8000 Fax: +1 (408) 503-8008 Email: marketing@supermicro.com (General Information) support@supermicro.com (T echnical Support) Web Site: www .supermicro.com Europe Address: Super Micro Computer B. ...

  • Supermicro X8STE - page 6

    vi X8ST3-F/X8STE User ’s Manual T able of Contents Prefac e About This Motherboard ................................................................................................ 3 Manual Organization ..................................................................................................... 3 Conventions Used in the Manual: .......... ...

  • Supermicro X8STE - page 7

    vii T able of Contents Universal Serial Bus (USB) ...................................................................... 2-1 2 Ethernet Ports .......................................................................................... 2-1 3 Serial Ports ............................................................................................... 2- ...

  • Supermicro X8STE - page 8

    X8ST3-F/X8STE User ’s Manual viii IPMI Dedicated LAN LEDs (X8ST3-F Only) ............................................ 2-3 4 SAS Activity LED (X8ST3-F Only) ........................................................... 2-3 5 SAS Heartbeat LED (X8ST3-F Only) ....................................................... 2-3 5 Onboard Power LED ............. ...

  • Supermicro X8STE - page 9

    Chapter 1: Introduction 1-1 Chapter 1 Introduction 1-1 Overview Checklist Congratulat ions on purchasin g yo ur computer mothe rboard from an acknow ledged leader in the industry . Supermicro boards are designed with the utmost attention to detail to provide you with the highest standards in quality and performance. Please check that the following ...

  • Supermicro X8STE - page 10

    1-2 X8ST3-F/X8STE User ’s Manual X8 ST3-F Image Note : All grap hics sh own in this manual were based u pon th e late st PCB Revision available at the time of publishing of the manual. The motherboard you've received may or may not look exac tly t he sa me a s the gra phics shown in this manual. ...

  • Supermicro X8STE - page 11

    Chapter 1: Introduction 1-3 Motherboard Layout Important Notes to the User Jumpers not indicat ed are for testing only . • See Chapter 2 for detailed information on jumpers, I/O ports and JF1 front • panel connectio ns. " " indicates the location of "Pin 1". • When LE 1 (Onbo ard Po wer LED Indica tor) i s on, sys ...

  • Supermicro X8STE - page 12

    1-4 X8ST3-F/X8STE User ’s Manual BMC JT AG 1 SAS1 SAS2 SAS7 SAS3 SAS4 SAS5 SAS6 JWOL Battery JD1 SPKR1 JAR JI2C1 JI2C2 JPS2 JL1 1 JOH 1 JF1 LES1 LE1 COM1 FA N4 FA N3 FA N5 FA N2 FA N1 JPW1 SMBUS_PS1 JPW2 JPG1 JPUSB3 JBMC1 JPS1 JPUSB2 JPL1 JPL2 JLED JWD JPUSB1 IPMI_LAN COM2 Floppy I-Button T-SGPIO1 3-SGPIO2 3-SGPIO1 USB 6/7 USB 4/5 USB3 USB2 Slot6 ...

  • Supermicro X8STE - page 13

    Chapter 1: Introduction 1-5 X8ST3-F/X8STE Jumpers JPUSB3 #19 FP USB 2, 3 Wake-up Pins 1-2 (Enabled) JWD #53 Watch Dog Timer Enable Pins 1-2 (Reset) X8ST3-F/X8STE Headers/Connectors Connector Label Description Battery #45 Onboard battery (B1) COM1/COM2 #3, 1 1 COM1/2 Serial connection headers Fans 1~5 #58, 52, 34, 33, 7 System/CPU fan headers (Fan 1 ...

  • Supermicro X8STE - page 14

    1-6 X8ST3-F/X8STE User ’s Manual Motherboard Features CPU Single Intel® Core™ i7 and Intel® Xeon® 5500/3500 series processors in the • LGA 1366 socket package. Memory Six 240-pin, DDR3 SDRAM DIMM sockets with support for unbuffered ECC or • non ECC 1333/1066/800 MHz memory . Note : Both Unbu ffered ECC and N on-ECC DIM M modules ar ...

  • Supermicro X8STE - page 15

    Chapter 1: Introduction 1-7 Supports RAID 0, 1 , 10 under the Linux OS environment • SAS Connections (for the X8ST3-F only) Eight (8) SAS ports supported by the LSI 1068E Controller • Supports RAID 0, 1, 5*, 10 under the Windo ws OS environment • Supports RAID 0, 1 , 5*, 10 under the Linux OS environment • Notes : 1. RAID 5 is s ...

  • Supermicro X8STE - page 16

    1-8 X8ST3-F/X8STE User ’s Manual Main switch override mechanism • Keyboard Wake-up from Soft-Off • USB Wake-up from Soft-Off • W ake-on-LAN • Power-on mode for AC power recovery • PC Health Monitoring CPU Monitoring Onboard voltage monitors for CPU core, Memory V oltage, Chipset V oltage, • +1.8V , +3.3V , +3.3V stan ...

  • Supermicro X8STE - page 17

    Chapter 1: Introduction 1-9 Notes ...

  • Supermicro X8STE - page 18

    1-10 X8ST3-F/X8STE User ’s Manual X8ST3-F/X8STE System Block Diagram Note: This is a general block di agram and may not exactly repr esent the features on your mothe rboard. See the follow ing pages for the actual specications of each motherboard. W83795AD G H/W Monito r Inte l VRD 11. 1 Inte l ID T Intersi l QPI: Up to 6.40 GT/s PCIE_x 8 PCI_ ...

  • Supermicro X8STE - page 19

    Chapter 1: Introduction 1-1 1 1-2 Chipset Overview Bui lt up on the fun ct i on ali t y an d th e ca pa bil it y o f the Inte l X5 8 E xp re ss c hi ps et, t he X8S T3 - F/ X8 STE mot he r bo ar d pr ovi de s t he pe r f or m anc e a nd fea tur e s et re qu ire d for singl e - p ro c es so r-b ase d high - en d system s with c on g ur ati on opt ...

  • Supermicro X8STE - page 20

    1-12 X8ST3-F/X8STE User ’s Manual 1-3 PC Health Monitoring This section desc ribes the PC health mo nitoring features of the X8ST3-F/X8STE. These features are supported by an onboard System Hardware Monitor chip. Recovery from AC Power Loss BIOS provides a setting for you to determine how the system will respond when AC power is los t and then re ...

  • Supermicro X8STE - page 21

    Chapter 1: Introduction 1-13 key , the CPU will wake-up and the LED indicator will automatically stop blinking and remain on. BIOS Support for USB Keyboard If the USB keyboard is the only keyboard in the system, it will function like a normal keyboard during system boot-up. Main Switch Override Mechanism When an A TX power supply is used, the power ...

  • Supermicro X8STE - page 22

    1-14 X8ST3-F/X8STE User ’s Manual It is strongly recom mended that you use a high qua lity p ower su pply th at meet s A TX12V standard power supply Specication 1.1 or above. It is also required that the 12V 8 -pin power connection (JPW2) be used for adequate power supply . In areas where n oisy p ower transmission is present, you may choose t ...

  • Supermicro X8STE - page 23

    Chapter 1: Introduction 1-15 The WPCM450 also includes the following features: One X-Bus parallel interface for expansion I/O connections • Three ADC inputs, Analog and Digital Video outputs • T wo serial for boundary scan and debug • Note: For more information on IPMI conguration, please refer to the Embedded IPMI User's Gui ...

  • Supermicro X8STE - page 24

    1-16 X8ST3-F/X8STE User ’s Manual Notes ...

  • Supermicro X8STE - page 25

    Chapter 2: Installation 2-1 Chapter 2 Installation 2-1 Static-Sensitive Devices Electrostatic-Discharge (ESD) can damage electronic com ponents. T o prevent dam - age t o yo ur s ystem board, it is i mportant to hand le i t ver y ca refully . The f ollowing measures are generally sufcient to protect your equipment from ESD. Precautions • Use a ...

  • Supermicro X8STE - page 26

    2-2 X8ST3-F/X8STE User's Manual 2-2 Processor and Heatsink Installation When handlin g the proces sor package, avoid placi ng direct pre ssure on the label area of the fan. No te s: Always connect the power cord last and always remove it before adding, re - 1. moving or changing any hardware components. Make sure that you install the processor ...

  • Supermicro X8STE - page 27

    Chapter 2: Installation 2-3 After removing the pla stic cap, using 4. your thumb and the index nger , hold the CPU at the north and south center edges. Align the CPU key , the semi-circle 5. cutout, against t he socket key , the notch below the gold color do t o n the side of the socket. Once both the CPU and the socket 6. are aligned, carefully ...

  • Supermicro X8STE - page 28

    2-4 X8ST3-F/X8STE User's Manual Installing a Passive CPU Heatsink (#SNK-P0037) Heatsink Bracket (BKT -0023L, for screw-type heatsink only .) If you use a s cr ew -ty pe heat si nk, 1. p l e a s e in s t a l l a he a t s i n k b r a c k e t (BKT -0023L) on the reverse side of th e mo t he r b o ar d be f or e in s ta l l i n g the heats ink. (T ...

  • Supermicro X8STE - page 29

    Chapter 2: Installation 2-5 Unplug the power cord from the 1. power supply . Using a screwdriver , loosen and 2. remove the heatsink screws from the motherboard in the sequence as shown in the pic ture on the right. Hold the heatsink as shown and 3. gently loosen it from the CPU by moving i t from side to side . (Do not use excessive force) Once it ...

  • Supermicro X8STE - page 30

    2-6 X8ST3-F/X8STE User's Manual X8ST3-F/X8STE 2-3 Mounting the Motherboard into the Chassis All motherboards have standard mounti ng holes to t di fferent types of chassis. Make sure that the locations of all mounting holes for the motherboard and the chas - sis match. Although a chass is may have both plastic and metal mounting fast eners, ...

  • Supermicro X8STE - page 31

    Chapter 2: Installation 2-7 X8ST3-F/X8STE 2-4 Installing and Removing the Memory Modules Note : Che ck th e S upe r mic ro web si te for re co mm end ed me mor y mod ule s. CAU T I O N Exe rc is e ex tr em e ca re w he n i ns ta lli ng o r rem ovi ng D IM M mo dul es to p reve nt any po ss ib le da ma ge. To I n s t a l l : In se r t m od ul e ve r ...

  • Supermicro X8STE - page 32

    2-8 X8ST3-F/X8STE User's Manual Memory Support The X8ST3-F/X8S TE supports up to 24 GB Unbuffered ECC or Non ECC DDR3 1333/1066/8 00 in 6 DI MM slots. DIMM Module Population Conguration For m em or y to wo rk pr op er ly, f oll ow th e t ab le be low for m emo r y ins ta llat io n: Memory Population (UDIMM Only Routing) DIMM Slots per Chann ...

  • Supermicro X8STE - page 33

    Chapter 2: Installation 2-9 Possible System Memory Allocation & A vailability System Device Size Physical Memory Remaining (-Available) (4 GB T otal System Memory) Firmware Hub ash memory (System BIOS) 1 MB 3.99 GB Local APIC 4 KB 3.99 GB Area Reserved for the chipset 2 MB 3.99 GB I/O APIC (4 Kbytes) 4 KB 3.99 GB PCI Enumeration Area 1 256 M ...

  • Supermicro X8STE - page 34

    2-10 X8ST3-F/X8STE User's Manual X8ST3-F/X8STE 2-5 Connectors/IO Ports The I/O port s are color coded in c onformance with the PC 99 specic ation. See t he gure below for the colors and locations of the various I/O ports. Back Panel Connectors and IO Ports Back Panel Connectors 1. Keyboard (Purple) 2. PS/2 Mouse (Green) 3. USB Port 0 4. ...

  • Supermicro X8STE - page 35

    Chapter 2: Installation 2-1 1 A TX P S/2 Key board an d PS/2 Mouse Ports Th e A TX PS/ 2 key b oa r d an d PS /2 mouse are locat ed next to the Back Panel USB Ports 0/1 on the mother - board. S ee the table a t right for pi n denitions. PS/2 Keyboard/Mouse Pin Denitions PS2 Keyboard PS2 Mouse Pin# Denition Pin# Denition 1 KB Data 1 Mous ...

  • Supermicro X8STE - page 36

    2-12 X8ST3-F/X8STE User's Manual X8ST3-F/X8STE 1. Backplane USB 0 2. Backplane USB 1 3. Front Panel USB 2 4. Front Panel USB 3 5. Front Panel USB 4/5 6. Front Panel USB 6/7 Universal Serial Bus (USB) T wo Universal Serial Bus ports (USB 0/1) are located on the I/O back panel. Additional six USB connections (USB 2, U SB 3 , U SB 4 /5 a nd USB 6 ...

  • Supermicro X8STE - page 37

    Chapter 2: Installation 2-13 Ethernet Ports T wo Ethernet ports are located next to the VG A port on t he IO Bac kplane. In addi tion, an IPMI Dedic ated LA N is located above the USB ports. These ports accept RJ45 type ca bles. Note s: 1. The I PMI Ded icated LAN is for the X8ST3-F only . 2. P lease refer to the LED I n d i c a t o r Se c t i o n ...

  • Supermicro X8STE - page 38

    2-14 X8ST3-F/X8STE User's Manual Serial Ports A CO M Po r t is lo c ated on th e IO Bac kp lan e an d a S er ia l po r t is lo - c a t e d n ex t to th e Fl o p p y D r i ve to pr ovi de fr o nt ac c es s. Se e th e ta bl e on th e r ig ht for p in de  nit io ns . SerialPortPinDenitions (COM1/COM2) Pin # Denition Pin # Den ...

  • Supermicro X8STE - page 39

    Chapter 2: Installation 2-15 1. VGA X8ST3-F/X8STE 1 Video Connector A Video (VGA) connector is lo cated n e x t t o t h e C O M P o r t o n t h e I O ba c k p l a ne . Thi s co n ne c t o r is use d to pr o v id e vi d eo an d CRT di s pl a y. Refer to the board lay out below fo r the location. Note: If you decide use an add-on VGA card instead, yo ...

  • Supermicro X8STE - page 40

    2-16 X8ST3-F/X8STE User's Manual Front Control Panel JF1 contains header pins for various buttons and indicators that are normally lo - cated on a control panel at the front of the chassis. These connectors are designed specically for use with Supermicro server chass is. S ee th e gu re be low f or th e description s of the var ious cont ...

  • Supermicro X8STE - page 41

    Chapter 2: Installation 2-17 Front Control Panel Pin Denitions Power LE D The Power LED connection is located on pins 15 and 16 of JF1. Refer to the table on the right for pin denitions. NMI Button Th e no n -m a s k ab l e in te r r u p t bu t t o n header is located on pins 19 and 20 of JF 1. R efer to th e ta ble o n th e ri gh ...

  • Supermicro X8STE - page 42

    2-18 X8ST3-F/X8STE User's Manual Po we r Bu tt on OH/Fan Fail LE D 1 NIC1 LE D Re se t Butt on 2 HDD LE D Po we r LE D Re se t PWR Vc c Vc c Vc c Vc c Gr ound Gr ound 19 20 Vc c X Gr ound NM I X Vc c PWR Fail LED NIC2 LE D NIC1/NIC2 LED Indicators The NIC (Network Interface Control - ler) LED connection for LAN port 1 is located on pins 1 1 an ...

  • Supermicro X8STE - page 43

    Chapter 2: Installation 2-19 Po we r Bu tt on OH/Fan Fail LE D 1 NIC1 LE D Re se t Butt on 2 HDD LE D Po we r LE D Re se t PWR Vc c Vc c Vc c Vc c Gr ound Gr ound 19 20 Vc c X Gr ound NM I X Vc c PWR Fail LED NIC2 LE D Overheat (OH)/Fan Fail LED Connect an LED cable to the OH/ Fan Fail connection on pins 7 and 8 of JF1 to provide advanced warnings ...

  • Supermicro X8STE - page 44

    2-20 X8ST3-F/X8STE User's Manual Po we r Bu tt on OH/Fan Fail LE D 1 NIC1 LE D Re se t Butt on 2 HDD LE D Po we r LE D Re se t PWR Vc c Vc c Vc c Vc c Gr ound Gr ound 19 20 Vc c X Gr ound NM I X Vc c PWR Fail LED NIC2 LE D Power Bu tton The Power Button connection is located on pins 1 and 2 of JF1. Momentarily contacting both pins will power o ...

  • Supermicro X8STE - page 45

    Chapter 2: Installation 2-21 BMC JTAG 1 SAS1 SAS2 SAS7 SAS3 SAS4 SAS5 SAS6 JWOL Battery JD1 SPKR1 JAR JI2C1 JI2C2 JPS2 JL1 1 JOH 1 JF1 LES1 LE1 COM1 F A N 4 F A N 3 F A N 5 F A N 2 F A N 1 JPW1 SMBUS_PS1 JPW2 JPG1 JPUSB3 JBMC1 JPS1 JPUSB2 JPL1 JPL2 JLED JWD JPUSB1 IPMI_LAN COM2 Floppy I-Button T-SGPIO1 3-SGPIO2 3-SGPIO1 USB 6/7 USB 4/5 USB3 USB2 Sl ...

  • Supermicro X8STE - page 46

    2-22 X8ST3-F/X8STE User's Manual BMC JTAG 1 SAS1 SAS2 SAS7 SAS3 SAS4 SAS5 SAS6 JWOL Battery JD1 SPKR1 JAR JI2C1 JI2C2 JPS2 JL1 1 JOH 1 JF1 LES1 LE1 COM1 FA N 4 FA N 3 FA N 5 FA N 2 FA N 1 JPW1 SMBUS_PS1 JPW2 JPG1 JPUSB3 JBMC1 JPS1 JPUSB2 JPL1 JPL2 JLED JWD JPUSB1 IPMI_LAN COM2 Floppy I-Button T-SGPIO1 3-SGPIO2 3-SGPIO1 USB 6/7 USB 4/5 USB3 USB ...

  • Supermicro X8STE - page 47

    Chapter 2: Installation 2-23 BMC JTAG 1 SAS1 SAS2 SAS7 SAS3 SAS4 SAS5 SAS6 JWOL Battery JD1 SPKR1 JAR JI2C1 JI2C2 JPS2 JL1 1 JOH 1 JF1 LES1 LE1 COM1 FA N 4 FA N 3 FA N 5 FA N 2 FA N 1 JPW1 SMBUS_PS1 JPW2 JPG1 JPUSB3 JBMC1 JPS1 JPUSB2 JPL1 JPL2 JLED JWD JPUSB1 IPMI_LAN COM2 Floppy I-Button T-SGPIO1 3-SGPIO2 3-SGPIO1 USB 6/7 USB 4/5 USB3 USB2 Slot6 P ...

  • Supermicro X8STE - page 48

    2-24 X8ST3-F/X8STE User's Manual Chassis Intrusion A Chassi s Int rusion header is l ocated at JL1 on the mother board. Attach the appropriate cable from the chas sis to inform you of a chassis intrusion when the chassis is opened. Chassis Intrusion PinDenitions(JL1) Pin# Denition 1 Intrusion Input 2 Ground A. Overheat/Fan Fail LED ...

  • Supermicro X8STE - page 49

    Chapter 2: Installation 2-25 A. PWR SMB B. PWR LED Power Supply I 2 C Connector Power Supply (I 2 C) Connector , locat - ed at SMB_PS1 on the mothe rboard. Th is con ne ct o r mon it o rs the sta t us of the power supply , fan and system temperature. See the table on the right for pin denitions. PWR Supply I 2 C PinDenitions Pin# Den ...

  • Supermicro X8STE - page 50

    2-26 X8ST3-F/X8STE User's Manual BMC JTAG 1 SAS1 SAS2 SAS7 SAS3 SAS4 SAS5 SAS6 JWOL Battery JD1 SPKR1 JAR JI2C1 JI2C2 JPS2 JL1 1 JOH 1 JF1 LES1 LE1 COM1 FA N 4 FA N 3 FA N 5 FA N 2 FA N 1 JPW1 SMBUS_PS1 JPW2 JPG1 JPUSB3 JBMC1 JPS1 JPUSB2 JPL1 JPL2 JLED JWD JPUSB1 IPMI_LAN COM2 Floppy I-Button T-SGPIO1 3-SGPIO2 3-SGPIO1 USB 6/7 USB 4/5 USB3 USB ...

  • Supermicro X8STE - page 51

    Chapter 2: Installation 2-27 BMC JTAG 1 SAS1 SAS2 SAS7 SAS3 SAS4 SAS5 SAS6 JWOL Battery JD1 SPKR1 JAR JI2C1 JI2C2 JPS2 JL1 1 JOH 1 JF1 LES1 LE1 COM1 FA N 4 FA N 3 FA N 5 FA N 2 FA N 1 JPW1 SMBUS_PS1 JPW2 JPG1 JPUSB3 JBMC1 JPS1 JPUSB2 JPL1 JPL2 JLED JWD JPUSB1 IPMI_LAN COM2 Floppy I-Button T-SGPIO1 3-SGPIO2 3-SGPIO1 USB 6/7 USB 4/5 USB3 USB2 Slot6 P ...

  • Supermicro X8STE - page 52

    2-28 X8ST3-F/X8STE User's Manual BMC JTAG 1 SAS1 SAS2 SAS7 SAS3 SAS4 SAS5 SAS6 JWOL Battery JD1 SPKR1 JAR JI2C1 JI2C2 JPS2 JL1 1 JOH 1 JF1 LES1 LE1 COM1 FA N 4 FA N 3 FA N 5 FA N 2 FA N 1 JPW1 SMBUS_PS1 JPW2 JPG1 JPUSB3 JBMC1 JPS1 JPUSB2 JPL1 JPL2 JLED JWD JPUSB1 IPMI_LAN COM2 Floppy I-Button T-SGPIO1 3-SGPIO2 3-SGPIO1 USB 6/7 USB 4/5 USB3 USB ...

  • Supermicro X8STE - page 53

    Chapter 2: Installation 2-29 BMC JTAG 1 SAS1 SAS2 SAS7 SAS3 SAS4 SAS5 SAS6 JWOL Battery JD1 SPKR1 JAR JI2C1 JI2C2 JPS2 JL1 1 JOH 1 JF1 LES1 LE1 COM1 FA N 4 FA N 3 FA N 5 FA N 2 FA N 1 JPW1 SMBUS_PS1 JPW2 JPG1 JPUSB3 JBMC1 JPS1 JPUSB2 JPL1 JPL2 JLED JWD JPUSB1 IPMI_LAN COM2 Floppy I-Button T-SGPIO1 3-SGPIO2 3-SGPIO1 USB 6/7 USB 4/5 USB3 USB2 Slot6 P ...

  • Supermicro X8STE - page 54

    2-30 X8ST3-F/X8STE User's Manual BMC JTAG 1 SAS1 SAS2 SAS7 SAS3 SAS4 SAS5 SAS6 JWOL Battery JD1 SPKR1 JAR JI2C1 JI2C2 JPS2 JL1 1 JOH 1 JF1 LES1 LE1 COM1 FA N 4 FA N 3 FA N 5 FA N 2 FA N 1 JPW1 SMBUS_PS1 JPW2 JPG1 JPUSB3 JBMC1 JPS1 JPUSB2 JPL1 JPL2 JLED JWD JPUSB1 IPMI_LAN COM2 Floppy I-Button T-SGPIO1 3-SGPIO2 3-SGPIO1 USB 6/7 USB 4/5 USB3 USB ...

  • Supermicro X8STE - page 55

    Chapter 2: Installation 2-31 BMC JTAG 1 SAS1 SAS2 SAS7 SAS3 SAS4 SAS5 SAS6 JWOL Battery JD1 SPKR1 JAR JI2C1 JI2C2 JPS2 JL1 1 JOH 1 JF1 LES1 LE1 COM1 FA N 4 FA N 3 FA N 5 FA N 2 FA N 1 JPW1 SMBUS_PS1 JPW2 JPG1 JPUSB3 JBMC1 JPS1 JPUSB2 JPL1 JPL2 JLED JWD JPUSB1 IPMI_LAN COM2 Floppy I-Button T-SGPIO1 3-SGPIO2 3-SGPIO1 USB 6/7 USB 4/5 USB3 USB2 Slot6 P ...

  • Supermicro X8STE - page 56

    2-32 X8ST3-F/X8STE User's Manual SAS Enable/Disable Jumper Settings Jumper Settings Denition Pins 1-2 Enabled (Default) Pins 2-3 Disabled SAS Enable/Disable (X8ST3-F Only) JPS1 al low s you to e nab le o r di sa ble SAS C onn ec to r s. The defau lt pos it io n is on pins 1 and 2 to e nab le SAS . S ee the ta bl e on th e ri gh t for j ump ...

  • Supermicro X8STE - page 57

    Chapter 2: Installation 2-33 BMC JTAG 1 SAS1 SAS2 SAS7 SAS3 SAS4 SAS5 SAS6 JWOL Battery JD1 SPKR1 JAR JI2C1 JI2C2 JPS2 JL1 1 JOH 1 JF1 LES1 LE1 COM1 FA N 4 FA N 3 FA N 5 FA N 2 FA N 1 JPW1 SMBUS_PS1 JPW2 JPG1 JPUSB3 JBMC1 JPS1 JPUSB2 JPL1 JPL2 JLED JWD JPUSB1 IPMI_LAN COM2 Floppy I-Button T-SGPIO1 3-SGPIO2 3-SGPIO1 USB 6/7 USB 4/5 USB3 USB2 Slot6 P ...

  • Supermicro X8STE - page 58

    2-34 X8ST3-F/X8STE User's Manual BMC JTAG 1 SAS1 SAS2 SAS7 SAS3 SAS4 SAS5 SAS6 JWOL Battery JD1 SPKR1 JAR JI2C1 JI2C2 JPS2 JL1 1 JOH 1 JF1 LES1 LE1 COM1 FA N 4 FA N 3 FA N 5 FA N 2 FA N 1 JPW1 SMBUS_PS1 JPW2 JPG1 JPUSB3 JBMC1 JPS1 JPUSB2 JPL1 JPL2 JLED JWD JPUSB1 IPMI_LAN COM2 Floppy I-Button T-SGPIO1 3-SGPIO2 3-SGPIO1 USB 6/7 USB 4/5 USB3 USB ...

  • Supermicro X8STE - page 59

    Chapter 2: Installation 2-35 SAS Heartbeat LED (X8ST3-F Only) A SAS He ar tb eat LED is lo c ate d at LES2. Wh en LES2 bl ink s, SAS con ne c tor s are rea dy for u se. Refer t o t he tabl e o n t he ri ght fo r detai ls. Also see the layout bel ow for t he L ED lo c ati o n. SAS Heartbeat LED Indicator (LE5) LED Settings Blinking: Y ellow SAS is r ...

  • Supermicro X8STE - page 60

    2-36 X8ST3-F/X8STE User's Manual Onboard PWR LED Indicator LED Settings LED Color Denition Off System Of f On System on, or System off and PWR Cable Connected Onboard Power LED An Onboard Power LED is located at LE1 on the motherboard. When LE1 i s on, the AC power cable is connected. Make sure to disconnect the p ower cable before removing ...

  • Supermicro X8STE - page 61

    Chapter 2: Installation 2-37 BMC JTAG 1 SAS1 SAS2 SAS7 SAS3 SAS4 SAS5 SAS6 JWOL Battery JD1 SPKR1 JAR JI2C1 JI2C2 JPS2 JL1 1 JOH 1 JF1 LES1 LE1 COM1 FA N 4 FA N 3 FA N 5 FA N 2 FA N 1 JPW1 SMBUS_PS1 JPW2 JPG1 JPUSB3 JBMC1 JPS1 JPUSB2 JPL1 JPL2 JLED JWD JPUSB1 IPMI_LAN COM2 Floppy I-Button T-SGPIO1 3-SGPIO2 3-SGPIO1 USB 6/7 USB 4/5 USB3 USB2 Slot6 P ...

  • Supermicro X8STE - page 62

    2-38 X8ST3-F/X8STE User's Manual BMC JTAG 1 SAS1 SAS2 SAS7 SAS3 SAS4 SAS5 SAS6 JWOL Battery JD1 SPKR1 JAR JI2C1 JI2C2 JPS2 JL1 1 JOH 1 JF1 LES1 LE1 COM1 FA N 4 FA N 3 FA N 5 FA N 2 FA N 1 JPW1 SMBUS_PS1 JPW2 JPG1 JPUSB3 JBMC1 JPS1 JPUSB2 JPL1 JPL2 JLED JWD JPUSB1 IPMI_LAN COM2 Floppy I-Button T-SGPIO1 3-SGPIO2 3-SGPIO1 USB 6/7 USB 4/5 USB3 USB ...

  • Supermicro X8STE - page 63

    3-1 Chapter 3: Troubleshooting Chapter 3 T roubleshooting 3-1 T roubleshooting Procedures Use the fol low ing pro c edu res to trou ble sho ot your system. If you have follo wed all of th e p ro c ed ure s be lo w a nd st il l nee d as si st an ce, r efe r t o th e ‘ T ec hn ic al S upp o r t Pro c ed ure s’ a nd /or ‘ Retu r nin g M e rc ha ...

  • Supermicro X8STE - page 64

    3-2 X8ST3-F/X8STE User's Manual 2. Us e th e spe aker to d eter mi ne i f any be ep c od es exi st . (Refer to App end ix A for det ail s on bee p c o de s. ) 3. Rem ove a ll m em o r y mo dul es an d t ur n on th e sy ste m. (I f t he al ar m is on, c he ck the sp ec s of mem or y m odu le s, res et t he me mor y or tr y a dif fere nt one.) M ...

  • Supermicro X8STE - page 65

    3-3 Chapter 3: Troubleshooting com/support / bios/ ). Note: Not all BIOS can be ashed. Som e cannot be ashe d; it depends on the modications to the boot block code. 3. If yo u' ve fol lowe d th e ins tr uc ti ons above to tr oub le sho ot you r syste m, and still cannot resolve the problem, then c ont a ct Supe rm ic r o's tech n ...

  • Supermicro X8STE - page 66

    3-4 X8ST3-F/X8STE User's Manual BIOS warning message and the information on how to update your BIOS on our web site. Select your mot herboard model and downl oad the B IOS ROM  le to your computer . Also, check the current BIOS revision and make sure that it is newer than your BIOS before downloading. Y ou may choose the zip le or the .e ...

  • Supermicro X8STE - page 67

    3-5 Chapter 3: Troubleshooting Answ er: N o , t h e P C I - E x 1 6 s l o t i s n o t o n l y f o r g r a p h i c c a r d s . I t m a y b e u s e d for PC I - E stor ag e, L A N, and ot her pe r iph era ls. Qu e st i on: D o es X8 se r ie s m ot h er b o ar d s co m e wi t h a sc r ew t y p e CPU h ea t sink brac ket? Answ er: No, it d oes not come ...

  • Supermicro X8STE - page 68

    3-6 X8ST3-F/X8STE User's Manual Notes ...

  • Supermicro X8STE - page 69

    Chapter 4: AMI BIOS 4-1 Chapter 4 BIOS 4-1 Introduction This chapter describes the AMI BIOS Setup Utility for the X8ST3-F/X8STE . The AMI ROM BIOS is s tored in a Fl ash EEPROM an d can be easi ly updated. This ch apter describes the basic navigation of the AMI BIOS Setup Utility setup screens. Starting BIOS Setup Utility T o enter the AMI BIOS Set ...

  • Supermicro X8STE - page 70

    4-2 X8ST3-F/X8STE User ’s Manual How to Start the Setup Utility Normally , the only visible Power-On Self-T est (POST) routine is the memory test. As th e mem ory i s bei ng te sted, press the <D elete> key to ent er th e mai n men u of the AMI BIOS S etup Utilit y . Fr om the main menu, you can acces s the other setup screens. An AMI BIOS ...

  • Supermicro X8STE - page 71

    Chapter 4: AMI BIOS 4-3 System Overview: The following BIOS information will be displayed: System Time/Syste m Date Use this option to change the system time and date. Highlight System Time or Sys - tem Date using the arrow ke ys. Enter new values through the keyboa rd. Press the <T ab> key or the arr ow keys to move between elds. The da t ...

  • Supermicro X8STE - page 72

    4-4 X8ST3-F/X8STE User ’s Manual 4-3  Advanced Setup Congurations Use the arrow keys to select Boot Setup and hit <Enter> to access the submenu items:  BOOT Feature Quick Boot If Enabled, this option will skip certain tests during POST to reduce the time needed for system boot. The options are Enabled and Disabled. Quiet B ...

  • Supermicro X8STE - page 73

    Chapter 4: AMI BIOS 4-5 W ait For 'F1' If Error Thi s fo rc e s t he sy ste m t o wai t u nti l th e ' F 1' key is p re ss ed i f an er r or o c cu rs . T he opti on s a re Di sab le d a nd Enabled . Hit 'Del' Message Display Thi s featu re disp lay s "Pre s s DEL to r un Setu p" duri ng POST . The options a ...

  • Supermicro X8STE - page 74

    4-6 X8ST3-F/X8STE User ’s Manual ting. Se lect Auto fo r the BIOS t o automa tically select t he CPU multipli er setti ng for your system. The options are Auto and Manual. Clock Spread Spectrum Select Enable to use the feature of Clock Spectrum, which will allow the BIOS to monitor and a ttempt to re duce the lev el of Electr omagnetic I nterfere ...

  • Supermicro X8STE - page 75

    Chapter 4: AMI BIOS 4-7 Intel AES-NI (When supported by the CPU) Intel® AES instructions are a new set of instructions available beginning with the the all new 2010 Intel® Core™ processor family based on the 32nm Intel® microarchitecture. These instructions enable fast and secure data encryption and decryption, using the Advanced Encryption St ...

  • Supermicro X8STE - page 76

    4-8 X8ST3-F/X8STE User ’s Manual C3 Auto Demotion When enabled, the CPU will conditionally demote C6 or C7 requests to C3 based on un-core auto-demote information. The options are Disabled and Enabled. ACPI T State This feature E nables the ACPI throttling support for the processor to s ave power . The options are Disabled and Enabled . DCA T ech ...

  • Supermicro X8STE - page 77

    Chapter 4: AMI BIOS 4-9 L0s i s int ended as a powe r sav ing state. It al lows a lin k to quickl y ent er a nd recover form a power saving state without going through recovery . L1 is a power saving s tate that allows an ad ditional power saving o ver L0s, but with additional r esume (wake-up) l atency . Select Enabled to activate Q PI pow er savi ...

  • Supermicro X8STE - page 78

    4-10 X8ST3-F/X8STE User ’s Manual Throttling - Closed Loop Throttling improves reliability and reduces power in the processor by au - tomatic voltage control d uring processor idle stat es. Available options a re Disabled and Enabled. Intel VT -d Select Enabled to enable Intel's Virtualization T echnology support for Direct I/O VT -d by repo ...

  • Supermicro X8STE - page 79

    Chapter 4: AMI BIOS 4-1 1 Legacy USB Support Select Enabled to use Le gacy U SB de vices. If th is ite m is set to Auto, Legacy USB support will be automatically enabled if a legacy USB device is installed on the motherboard, and vise versa. The settings are Disabled, Enabled and Auto .  IDE / Floppy Conguration When this submenu is ...

  • Supermicro X8STE - page 80

    4-12 X8ST3-F/X8STE User ’s Manual activate the following su bmenu screen for detaile d options of t hese items. S et the correct congurations accordingly . The items included in the submenu are: T ype Select the type of device connec ted to the system . The options are Not Installed, Auto , CD/DVD and ARMD. LBA/Large Mode LBA (Logical Block Ad ...

  • Supermicro X8STE - page 81

    Chapter 4: AMI BIOS 4-13 DMA Mode Select Auto to allow the BIOS to automa tically detect IDE DMA mode when the IDE disk drive support cannot be determined. Select SWDMA0 to allow the BIOS to use Single Word DMA mode 0. It has a data transfer rate of 2.1 MB/s. Select SWDMA1 to allow the BIOS to use Single Word DMA mode 1. It has a data transfer rate ...

  • Supermicro X8STE - page 82

    4-14 X8ST3-F/X8STE User ’s Manual the S. M.A.R.T . Sele ct Ena bled t o allo w the AM I BIOS to use the S.M.A.R.T . to support hard drive disk. The options are Disabled, Enabled, and Auto . 32-Bit Data T ransfer Select Enable to ena ble th e funct ion of 32-bit IDE data transfer. The options are Enabled and Disabled.  PC I/Pn P Congu rat ...

  • Supermicro X8STE - page 83

    Chapter 4: AMI BIOS 4-15 Load Onboard LAN1 Option ROM/Load Onboard LAN2 Option ROM This feature is to enable LAN OPROM for PXE. T his is t o b oot computers using a network interface. The options are Disabled and Enabled. Load SAS Option ROM (X8ST3-F Only) This feature is to load the Serial Attached SCSI (SAS) option ROM, if available. The options ...

  • Supermicro X8STE - page 84

    4-16 X8ST3-F/X8STE User ’s Manual ditional optio n, Onboard IPMI is featu red on the X8ST3-F mothe rboard only , and becomes the default. Serial Port Mode This feature allows the user to set the seri al p ort m ode for Console Redirec tion. The options are 115200 8, n 1 ; 57600 8, n, 1; 38400 8, n, 1; 19200 8, n, 1; and 9600 8, n, 1. Flow Control ...

  • Supermicro X8STE - page 85

    Chapter 4: AMI BIOS 4-17 W arning: Any temperature that exceeds the CPU threshold temperature predened by the CPU manufacture r may result in CPU overh eat or system instability . When the CPU temp erature r eaches t his prede ned thre shold, t he CPU and system cooling fans will run at full speed. The options are: The Early Alarm: Select thi ...

  • Supermicro X8STE - page 86

    4-18 X8ST3-F/X8STE User ’s Manual speed to bring the CPU tempe rature down. If the CPU temperature still increases even with the CPU fan running at full speed, the system buzzer will activate and the Overheat LED will turn on. The Earl y Alarm – the Overheat LED an d system buzzer will be activ ated exa ctly when the Hig h level is reached. The ...

  • Supermicro X8STE - page 87

    Chapter 4: AMI BIOS 4-19 system cooling. Selec t Fu ll Sp eed t o all ow th e onb oard fans to r un at full spee d (o f 100% Pulse Width Modulation Duty Cycle) for maximum cooling. The Full S peed setti ng is reco mmen ded for sp ecial s ystem co ngu rati on or debu ggin g. Select Performance fo r th e o nboard fans to run at 70% of the Initia l ...

  • Supermicro X8STE - page 88

    4-20 X8ST3-F/X8STE User ’s Manual APIC ACPI SCI IRQ When this item i s set t o Enable d, APIC ACPI SCI IRQ is su pported b y the s ystem. The options are Enabled and Disabled . Headless Mode This feature is used to e nable syste m to functio n without a k eyboard, mo nitor or mouse attached The options are Enabled and Disabled . ACPI V ersion Fea ...

  • Supermicro X8STE - page 89

    Chapter 4: AMI BIOS 4-21 Channel Number Status - T his f eat ure retur ns the c han nel s tat us for t he Channel Number selected above: "Channel Number is OK" or "Wrong Channel Number". IP Address Source - Thi s f eatu re selects whether the IP a ddres s, Subnet Mask and Gateway Address are automatically assigned by the network ...

  • Supermicro X8STE - page 90

    4-22 X8ST3-F/X8STE User ’s Manual Clear event log This op tion cl ears th e Event Log memory of a ll mess ages. The option s are OK and Cancel. PCIE Error Log Use this option to enable loggi ng of errors enc ountered in th e system's PCI e bus. The options are Y es and No. Memory ECC Error Log Use this opt ion to enabl e logging of errors en ...

  • Supermicro X8STE - page 91

    Chapter 4: AMI BIOS 4-23 4-4 Security Settings The AMI BIOS provides a Supervisor and a User password. If you use both pass - words, the Supervisor password must be set rst. Superv isor Pas sword This item indicates if a supervisor password has been entered for the system. Clear means su ch a password has n ot been used and Set means a sup ervis ...

  • Supermicro X8STE - page 92

    4-24 X8ST3-F/X8STE User ’s Manual Use th is feat ure to co n gur e B oo t S et tin gs:  Boot Device Priority This f eature allows the user t o spe cify t he seq uence of pri ority for t he Boo t Devi ce. The settings are 1st boo t device, 2nd boot devic e, 3rd boot device, 4th boo t device, 5th boot device and Disabl ed. 1st Boot Device - 1 ...

  • Supermicro X8STE - page 93

    Chapter 4: AMI BIOS 4-25 4-6 Exit Options Select the Exit t ab from the AMI BIOS Setup Utility sc reen to enter the Exit BIOS Setup screen. Save Changes and Exit When you have complete d the system congura tion changes, sel ect this option to leave the BIOS Setup Utility and reboot the computer, so the new system con -  Hard Disk Drives This ...

  • Supermicro X8STE - page 94

    4-26 X8ST3-F/X8STE User ’s Manual guration parameters can take effect. Select Save Changes and Exit from the Exit menu and press <Enter>. Discard Changes and Exit Select th is optio n to q uit the BIOS Setup without making any p ermanent changes to the system congurat ion, an d reboot the computer. Select Disca rd Chang es and Exit fr ...

  • Supermicro X8STE - page 95

    Appendix A: POST Error Beep Codes A-1 Appendix A POST Error Beep Codes This secti on lists POST (Pow er On Sel f T est) error beep code s for th e AMI BIOS. POST error beep codes are divided into two categories: recoverable and terminal. This section lists Beep Codes for recoverable POST errors. Recoverable POST Error Beep Codes Wh en a r eco ver a ...

  • Supermicro X8STE - page 96

    A-2 X8ST3-F/X8STE User's Manual Notes ...

  • Supermicro X8STE - page 97

    Appendix B: Installing the Windows OS B-1 Appendix B Installing the W indows OS After all hardware components have been installed, you must rst congure Intel South Bridge RAID Settings before you install the Windows OS and other software drivers. T o congure RAID sett ings, please refer ? ...

  • Supermicro X8STE - page 98

    B-2               X8ST3-F/X8STE User's Manual Guide B-2 I nstal ling the Windows OS for Sys tems without RAI D Functions Insert Microsoft's Windows X P/2003 Setup CD in the CD Driver,and  the system will 1. start booting up from CD. Pr ...

  • Supermicro X8STE - page 99

    Appendix C: Software Installation Instructions C-1 Driver/T ool Installation Display Screen Note : Click the icons show ing a h and writi ng on th e paper to view the readme les for each item. Click a computer icon to the right of an item to insta ll an item (fr om top to the bottom) one at a time . After inst alling e ach item , you must re-boo ...

  • Supermicro X8STE - page 100

    C-2 X8ST3-F/X8STE User's Manual Supero Doctor III Interface Display Screen-I (Health Information) C-2 Conguring Supero Doctor III The Supe ro Doct or III program is a W eb-base management tool that s upports remote management capabili ty . It includes Remote and Local Management tools. The local management is called the SD III C ...

  • Supermicro X8STE - page 101

    Appendix C: Software Installation Instructions C-3 Supero Doctor III Interface Display Screen-II (Remote Control) Note : SD III Software Revisi on 1.0 can be downloaded from our Web site at: ftp:/ /ftp.super micro.com/u tility/Sup ero_Doctor_ III/. Y ou can also download SDIII User's Guide at: http://www .supermicro.com/PRODUCT/ Manuals/SDI II ...

  • Supermicro X8STE - page 102

    C-4 X8ST3-F/X8STE User's Manual Notes ...

  • Supermicro X8STE - page 103

    Appendix D: BIOS Recov ery D-1 Appendix D - BIOS Recovery The recovery procedure described in this section is to be used only when advised by your Su permicro T echnical Sup port repre sentative, or in ca ses of eme rgencies where the system no longer can boot due to a corrupted BIOS. DO NOT re-program (re-ash) the BIOS if your system is running ...

  • Supermicro X8STE - page 104

    D-2 X8ST3-F/X8STE User ’s Manual 5. Wh en the Boot S ector Recove ry Process i s complete, the system w ill reboot automatically and you will see a checksum error on your screen. Part 2 - BIOS Reprogramming (Re-Flashing) After completing the Boot Sector Recovery Process, you will need to reprogram (“re-ash”) the proper BIOS binar y le a ...

  • Supermicro X8STE - page 105

    (Disclaimer Continued) The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment, nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency communication devices or other critical systems whose failure to perform be reasonably expected to result in signicant injury or ...

Manufacturer Supermicro Category Motherboard

Documents that we receive from a manufacturer of a Supermicro X8STE can be divided into several groups. They are, among others:
- Supermicro technical drawings
- X8STE manuals
- Supermicro product data sheets
- information booklets
- or energy labels Supermicro X8STE
All of them are important, but the most important information from the point of view of use of the device are in the user manual Supermicro X8STE.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Supermicro X8STE, service manual, brief instructions and user manuals Supermicro X8STE. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Supermicro X8STE.

Similar manuals

A complete manual for the device Supermicro X8STE, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Supermicro X8STE by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Supermicro X8STE.

A complete Supermicro manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Supermicro X8STE - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Supermicro X8STE, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Supermicro X8STE, that we can find in the current document
3. Tips how to use the basic functions of the device Supermicro X8STE - which should help us in our first steps of using Supermicro X8STE
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Supermicro X8STE
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Supermicro X8STE in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Supermicro X8STE?

Use the form below

If you did not solve your problem by using a manual Supermicro X8STE, ask a question using the form below. If a user had a similar problem with Supermicro X8STE it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)