English dropdown-ico

Manual Axor 10920001

8 pages 3.61 mb
Download

Go to site of 8

Summary
  • Axor 10920001 - page 1

    Starck X 10920001 Installation Instructions / W arranty ...

  • Axor 10920001 - page 2

    2 T echnical Data Flow rates @ 45 psi Showerhead 2.5 gpm Handshower 2.5 gpm Bodysprays 4.3 gpm Maximum water pressure 145 psi Recommended water pressure: 40 - 75 psi Recommended hot water temp.: 120°F - 140°F* A check valve is installed in the handshower outlet. The high temperature limit stop may be reset to comply with local plumbing codes. See ...

  • Axor 10920001 - page 3

    3 Preparation The W ater wall requires 1/2” NPT male nipples, extend- ing 5/8” outside the surface of the finished wall for the hot and cold water supplies. For proper operation of the thermostatic mixer , the hot supply should be on the left and the cold supply should be on the right. Finish and seal the wall prior to installation of the W ate ...

  • Axor 10920001 - page 4

    4 Push the shower arm into place on the W ater wall. T ighten the set screw , using the Allen wrench (included). Hang the shower wall on the top mounting bracket. With a helper holding the panel, attach the hoses to the elbows. Install the bottom retaining screw and tighten with a screwdriver . Carefully install the showerhead on the shower arm. In ...

  • Axor 10920001 - page 5

    5 Remove the thermostatic mixer handle. Carefully remove the retaining clip and the stop ring from the stem. T urn the water on to the handshower . Place a thermom- eter in the water stream. T urn the ther mostatic mixer stem until the water coming out is the maximum allowable output temperature (usually 110° - 112°F). Reinstall the stop ring so ...

  • Axor 10920001 - page 6

    6 User Instructions Using the Thermostatic Mixer : turn the handle clockwise to obtain cooler water and counter- clockwise to obtain warmer water . The handle will stop when the water temperature is 100° - this is the safety stop. T o obtain water than 100°F , push the safety stop override button and continue turning the handle counter-clockwise. ...

  • Axor 10920001 - page 7

    7 Limited Lifetime Consumer W arranty This product has been manufactured and tested to the highest quality standards by Hansgrohe, Inc. (“Hansgrohe”). This warranty is limited to Hansgrohe products which are purchased by a consumer in the United States after March 1, 1996, and installed in either the United States or Canada. WHO IS COVERED BY T ...

  • Axor 10920001 - page 8

    Hansgrohe, Inc. • 1490 Bluegrass Lakes Parkway • Alpharetta, GA 30004 T el. 770-360-9880 • Fax 770-360-9887 www .hansgrohe-usa.com US - Installation Instructions • Part No. 90573703 • Revised 03/2008 the product for use primarily for any other purpose, including, without limitation, a commercial purpose, this warranty extends only (i) for ...

Manufacturer Axor Category Plumbing Product

Documents that we receive from a manufacturer of a Axor 10920001 can be divided into several groups. They are, among others:
- Axor technical drawings
- 10920001 manuals
- Axor product data sheets
- information booklets
- or energy labels Axor 10920001
All of them are important, but the most important information from the point of view of use of the device are in the user manual Axor 10920001.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Axor 10920001, service manual, brief instructions and user manuals Axor 10920001. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Axor 10920001.

Similar manuals

A complete manual for the device Axor 10920001, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Axor 10920001 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Axor 10920001.

A complete Axor manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Axor 10920001 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Axor 10920001, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Axor 10920001, that we can find in the current document
3. Tips how to use the basic functions of the device Axor 10920001 - which should help us in our first steps of using Axor 10920001
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Axor 10920001
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Axor 10920001 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Axor 10920001?

Use the form below

If you did not solve your problem by using a manual Axor 10920001, ask a question using the form below. If a user had a similar problem with Axor 10920001 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)