English dropdown-ico

Manual Siemens HIPATH HIPATH 1190

127 pages 3.96 mb
Download

Go to site of 127

Summary
  • Siemens HIPATH HIPATH 1190 - page 1

    HiPath 1100 HiPath 1120 HiPath 1150 HiPath 1190 System T elephones optiP oint 500 econom y optiPoint 500 basic optiPoint 500 standard optiPoint 500 advance User Manual oi.book Seite 1 M ittwoch, 16. August 2006 8:41 0 8 ...

  • Siemens HIPATH HIPATH 1190 - page 2

    Introduction 2 Intr oduction T he HiP ath 1 1 00 family consists of the f ollowing s y stems: HiP ath 1 1 20, HiP ath 1 1 50 and HiP ath 1 1 90. The f eat ures and operation of these s ystems ar e very similar . Their dif f erenc- es stem from t heir capability regarding the number of e xtensions, external lines and op- tional modules a v ailable. ...

  • Siemens HIPATH HIPATH 1190 - page 3

    Introduction 3 Important Notes The inf ormation in this document pro vides only general descriptio ns of the f eatures. The act ual feat ures ma y not correspond e xactly to the descriptions herein and, furthermore, they are subject to c hanges to the extent that products continue to be dev eloped. The selection of f eatur es to be pro vided is not ...

  • Siemens HIPATH HIPATH 1190 - page 4

    4 Introduction Introduction Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 About This User Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Important Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Trademarks . . . . . . . . . . . . ...

  • Siemens HIPATH HIPATH 1190 - page 5

    5 Introduction Switching to Handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Switching to a Head set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Speaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Ending a Ca ll . . . . . ...

  • Siemens HIPATH HIPATH 1190 - page 6

    6 Introduction Functions used for Receiving Calls . . . . . . . . . . . . . 51 Answering Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Answering a Call on Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Pickup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Siemens HIPATH HIPATH 1190 - page 7

    7 Introduction Miscellaneous Functions . . . . . . . . . . . . . . . . . . . . . . 77 Changing the Password for the Electronic Lock . . . . . . . . . . . . . . . . . . 77 Electronic Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 Music on Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Siemens HIPATH HIPATH 1190 - page 8

    8 Introduction Special functions for ISDN lines . . . . . . . . . . . . . . . 106 Call Forwarding on a Digital Line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 Deactivation of Cal l Forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 Anonymous Caller ID (Call Trace) . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Siemens HIPATH HIPATH 1190 - page 9

    Telephone Reference Information 9 T elephone Ref ere nce Information Front panel: optiP oint 50 0/basic/standard/eco nomy Keys for configuring the telephone Displa y , 2 lines, 24 c haracters per line Keyp a d Handset Enter k e y f or selecting a function Speak er fo r S p e a k e r - phone and ring tones Pr eset F unction ke y: End Microphone f or ...

  • Siemens HIPATH HIPATH 1190 - page 10

    Telephone Reference Information 10 Front P anel: optiP oint 50 0 ad vance optiP oint key module Keys for configuring the telephone Lighted displa y , 2 lines, 24 c haracters per line Key pa d Handset Enter k e y f or selecting a function Speak er f or Speaker- phone and ring tones Pr eset F unction ke y: End Microphone f or speakerphone K e y s f o ...

  • Siemens HIPATH HIPATH 1190 - page 11

    Telephone Reference Information 11 Bac k panel: optiP oint 50 0 F or connections/accessories av ailability in f ormation f or each optiP oint 500 model see Chapter ” o ptiP oint 50 0 P roperties and Connection Options” Æ page 1 6 and Chapter ”T erminals, Ad apters and A c cessories ” Æ page 1 1 7 PC (USB) HiP ath 1 1 00 Heads et Handset o ...

  • Siemens HIPATH HIPATH 1190 - page 12

    Passo a passo Telephone Reference Information 12 How to use this manual T he steps f or programming the s ystem are pr esented sequentially in gr aphic f ormat under the column "Step b y Step" on the lef t side of eac h page. S ymbol Explanations: Lif t the handset. R eplace the handset. Initiate con ver sation. , ... Enter number s, ke y ...

  • Siemens HIPATH HIPATH 1190 - page 13

    Telephone Reference Information 13 Passo a pa sso Display Message/P rompts Line 1 displa ys time, date, r equests, er ror messages and confirmation messages, as appr opriate. Line 2 displa ys the internal number , the s ystem’ s name, and av ailable options that can be selected b y pressing : . If the ">" appear s on the right, it me ...

  • Siemens HIPATH HIPATH 1190 - page 14

    Passo a passo Telephone Reference Information 14 P ress this ke y . > : Select using < > then confirm by pr essing : . > : Select using < > then confirm by pr essing : . ... Using a progr ammable key When a k e y has been progr ammed f or a cert ain f eat ure, simply press the k ey to activa te the f eatur e. F or exam- ple: P res ...

  • Siemens HIPATH HIPATH 1190 - page 15

    Using the HiPath 1 100 Features 15 Using the HiP ath 1 1 0 0 Featur es Consider ations F eature descri ptions and e xamples av ailable f or HiPath 1 1 0 0ar e based on a standard opti- P oint 50 0 sy stem telephone model. Chec k specific pr ocedure to be f ollow ed f or the dif f erent s ystem telephone models. F or inf ormation on how to configure ...

  • Siemens HIPATH HIPATH 1190 - page 16

    Using the HiPath 1100 Feat ures 16 Note: T he number of e xternal lines and e xtensions a vailable depends on the s y stem’ s configur a- tion. optiP oint 50 0 Pr opert ies and Connection Options optiP oint 50 0 1 [1] The name and type are pr inted on the bottom of the optiPoint 500 tel ephone set. econom y basic standard adv ance F unction ke ys ...

  • Siemens HIPATH HIPATH 1190 - page 17

    Using the HiPath 1 100 Features 17 S ystem signaling t ones During f eatur e configuration the s ystem uses the f ollowing signaling tones: To n e M e a n i n g Internal dialing tone Th e sy stem is read y to re ceive and send call infor mation. Signaling tone Connection established. Ring signal is being applied to phone number . Dial tone Network ...

  • Siemens HIPATH HIPATH 1190 - page 18

    Step by step Functions us ed for making calls 18 Funct ions used for making calls Making Calls Considerations • When authoriz ed, it allow s you to call external num- bers 1 on a public network. • T he HiPath 1 1 00 can also be programmed to req uire pressing the "Internal" k ey bef ore an internal number can be dialed. When this is t ...

  • Siemens HIPATH HIPATH 1190 - page 19

    Functions us ed for making calls 19 Step by step ... Using the Speak erphone Handset on the hook. Pr ess this ke y . • F or an int ernal call : Enter an ex tension number (e.g., 1 1/1 0 1). or • F or an external call : Enter the access code f or an external line (e.g., 0) the external number y ou w ant to call. W ait f or the call to be ans wer ...

  • Siemens HIPATH HIPATH 1190 - page 20

    Step by step Functions us ed for making calls 20 ... Using Automat ic S eizure of an Active External Line • Internal call P ress the "INTERNAL" k ey . Enter an e xtension number (e.g., 1 1/1 0 1). • External calls : Enter the external number y ou want to call. W ait f or the call to be answ ered. Initiate con ver sation. ... Using a G ...

  • Siemens HIPATH HIPATH 1190 - page 21

    Functions us ed for making calls 21 Step by step S witc hing t o Speake rphone Conv ersation using the Handset and P ress and hold this k ey while placing the handset on the hook. T hen release the k ey and r esume the conv ersa- tion. Conv ersation using a Headset Pr ess the ke y and resume the con versation. S witc hing t o Handset Conv ersation ...

  • Siemens HIPATH HIPATH 1190 - page 22

    Step by step Functions us ed for making calls 22 Speaker T his f eat ure turns the speaker temporarily on to allo w other people in the same room to participate in the con- v ersation. Inf orm the per son on the other end that the speak er is on. Required: Conv ersation using th e handset. A ctiv ation P ress this ke y . T he speak er LED t urns on ...

  • Siemens HIPATH HIPATH 1190 - page 23

    Functions us ed for making calls 23 Step by step S eizure of a Specific Line Seizing a specific line selects that line f or generating an external call or a call to another P ABX. Enter the number of an external line (e.g ., 80 1). Seizing a specific line selects that line f or generating an external call or a call to another P ABX. Enter the numbe ...

  • Siemens HIPATH HIPATH 1190 - page 24

    Step by step Functions us ed for making calls 24 Using Speed Dialing Required: Individual Speed Dialing numbers are stor ed b y the user . S ystem Speed Dialing numbers ar e stored b y the Support T echnician. P ress this ke y . > : Select and pr ess to confirm. or Enter the code f or accessing Speed Dialing. Enter the desired abbreviated number ...

  • Siemens HIPATH HIPATH 1190 - page 25

    Functions us ed for making calls 25 Step by step If a number has alread y been stored, the name (if en - tered) or the telephone number associated will be dis- pla y . > : Select and press to confirm. Enter the external number to be stored in this position in the Individual Speed Dialing dir ectory . Optional Y ou can also ent er a name associat ...

  • Siemens HIPATH HIPATH 1190 - page 26

    Step by step Functions us ed for making calls 26 : P ress to confirm. or If y ou mak e a mist ak e: > : Select and press to confirm. All inf ormation is deleted. or If a name is displa yed, y ou can vie w the number asso- ciated to it. > : Select and p ress to confirm. or If a number is displa yed, y ou can vie w the name asso- ciated to it. ...

  • Siemens HIPATH HIPATH 1190 - page 27

    Functions us ed for making calls 27 Step by step Phonebook S earc h A Phonebook Searc h or and alphanumeric searc h allows an e x tension to lookup a per son ’ s number by the per- son ’ s name when making a call. Required: Names wer e assigned to the speed dialing numbers r ecorded. Lif t the handset. or Pr ess this ke y . The Speak er LED tur ...

  • Siemens HIPATH HIPATH 1190 - page 28

    Step by step Functions us ed for making calls 28 Entering Lett ers 1x Le t t e r A 2x Le t t e r B 3x Le t t e r C 4x Number 2 1x L et ter D , and so on. If no matc h is f ound f or the let ters enter ed or if it is not possible to enter let ters at the moment, y ou will hear a short beeping sound. Optional > : Select and press t o confirm. It d ...

  • Siemens HIPATH HIPATH 1190 - page 29

    Functions us ed for making calls 29 Step by step Caller Lists 1 If so configured, the last calls not answ ered identified by the e xtension are stor ed in three caller lists. T hese caller lists can be progr ammed to sav e only external calls or both e xternal and internal calls. Using a Sy stem T elephone with a display y ou can view and select li ...

  • Siemens HIPATH HIPATH 1190 - page 30

    Step by step Functions us ed for making calls 30 End consultation. > : Select and pr ess to confirm. or P ress this ke y . or R eplace the handset. or P ress this ke y . T he speak er LED turns of f . Consultation about time of call and additional cal l- er inf ormation Required: The r ecord wanted is sho w n in the caller list during the consul ...

  • Siemens HIPATH HIPATH 1190 - page 31

    Functions us ed for making calls 31 Step by step External Line Reservation 1 When there is no line av ailable f or making an external call, use the line reservation f eatur e. Required: T he user tried to access an e xternal line and receiv ed a busy signal. W ait 7 seconds W ait 7 seconds until you hear a distintive tone (if config - ured, R eserv ...

  • Siemens HIPATH HIPATH 1190 - page 32

    Step by step Functions us ed for making calls 32 For Internet Access An e x ternal line reservation f or Internet access allows an ex tension to bloc k a specified e xternal line. The r e - maining ex tensions will not be able to use this line while this f eatur e is active. T his, how ev er , does not pre- v ent the line from receiving incoming ca ...

  • Siemens HIPATH HIPATH 1190 - page 33

    Functions us ed for making calls 33 Step by step Recall due to No Answer/Busy : Pr ess to confirm. or Enter the code f or confirming the recall. or W ait 7 seconds W ait 7 seconds until you hear a distintive tone (if config- ured, R ecall will be automatical ly activated). W ait f or a confirmation tone. Replace the handset. or Pr ess this ke y . T ...

  • Siemens HIPATH HIPATH 1190 - page 34

    Step by step Functions us ed for making calls 34 Recall V erification/Deactiv ation > : Select and c onfirm. or Enter the code f or canceling a r ecall. Delete sele cted record. : P ress to confirm. End consultation > : Select and pr ess to confirm. or P ress this ke y . T he LED t urns of f . or P ress this ke y . T he LED t urns of f . Over ...

  • Siemens HIPATH HIPATH 1190 - page 35

    Functions us ed for making calls 35 Step by step Silent Monitoring 1 Silent Monitoring allows a user to o verride a call without sending a beep (f or cer tain countries only). Required: T here is a con v ersation in progr ess at the call destination. > : Select and press to confirm. or Enter the code f or Silent Monitoring . Enter the e xtension ...

  • Siemens HIPATH HIPATH 1190 - page 36

    Step by step Functions us ed for making calls 36 Hotline 1 T he Hotline f eat ure allows an e xtension to automatically generate a call to a pre-pr ogrammed number in the Sy s- tem Speed Dialing as s oon as the handset is lif ted. Lif t the handset. or P ress this ke y . T he LED t urns on. W ait f or the call to be answ ered. Initiate con ver sati ...

  • Siemens HIPATH HIPATH 1190 - page 37

    Functions us ed for making calls 37 Step by step Calling an Attendant Console (AC) 1 An At tendant Console can be called at an y time f or mak- ing a call or simply f or consult ation. Enter the code f or calling the At tendant Console. W ait f or the call to be ans wer ed. Initiate con versation. Dir ect Communication Call Thi s f eatur es enables ...

  • Siemens HIPATH HIPATH 1190 - page 38

    Step by step Functions us ed for making calls 38 Speakerphone Auto-Answ ering Mode 1 T he called e xtension receiv es an Alert tone. The call us- ing the speak erphone is established immediately af ter this tone is r eceived. Required: A S ys tem T elephone with a Speakerphone at the destination number . > : Select and pr ess to confirm. or > ...

  • Siemens HIPATH HIPATH 1190 - page 39

    Functions us ed for making calls 39 Step by step Y ou can configure the HiP ath 1 1 0 0 to send a w arning tone in the ev ent that no e xternal line is a vailable f or LCR (see Pr ogramming Manual - Main Configurations - W arning T one when LCR is not av ailable). This will alert the user to the f act that the call is being completed by a standard ...

  • Siemens HIPATH HIPATH 1190 - page 40

    Step by step Functions us ed for making calls 40 T he s ystem dials the number 341XXXX using 80 1 as a destination. If this line is bus y , the o v erflo w option route/destination will be 803. Con ver sion R ules may in- clude interdigit pauses (ref er to the Help file in HiPath 1 1 0 0 Manager). Required: This f eatur e must be configured f or th ...

  • Siemens HIPATH HIPATH 1190 - page 41

    Functions us ed for making calls 41 Step by step T imer for Outgoing External Calls 1 Thi s set ting specifies a maximum time f or the duration of an outgoing e x ternal call f or each extens ion. The time count starts upon connection of a call and it nev er restarts while the call is in progr ess (e.g ., when there is a tr ansf er). Once the speci ...

  • Siemens HIPATH HIPATH 1190 - page 42

    Step by step Functions us ed for making calls 42 • ”Suf fix Dialing” Æ page 49 • ”Door Opener” Æ page 91 • ”Electr onic L ock” Æ page 7 7 • ”Speed Dialing” Æ page 23 (S ystem and Individual) • ”R elay” Æ page 81 • ”Do Not Dist urb” Æ page 60 Required: The telephone us ed cannot be par t of the s ystem, that ...

  • Siemens HIPATH HIPATH 1190 - page 43

    Functions us ed for making calls 43 Step by step Using a T emporary MSN t o mak e a call Thi s f eatur e allo ws y ou to use a temporary MSN fr om your o wn directory to mak e an e xternal call. Or use the "”Pr ogramming the Ke ys” Æ page 96" f eat ure to assign a k e y to a MSN f or monitoring incoming and outgoing calls. Required: ...

  • Siemens HIPATH HIPATH 1190 - page 44

    Step by step Features used during Call 44 Featur es used during Call Consultation 1 T he Consultation f eature allo ws the extension to mak e a consultation to a third part y when a call is in progress. At the same time, it prev ents the first caller fr om listen- ing to the con ver sation. Required: A call is in pr ogress. : P ress to confirm. or ...

  • Siemens HIPATH HIPATH 1190 - page 45

    Features used during Call 45 Step by step Tr a n s f e r 1 The T ransf er f eatur e allo ws an e xtension to transf er a call (incoming or outgoing) to another extension or to an external number . Required: A call is in progr ess. > : Select and press to confirm. Enter the e xtension or external number . Optional ( ) Let the caller kno w that th ...

  • Siemens HIPATH HIPATH 1190 - page 46

    Step by step Features used during Call 46 If the consultation ext ension is busy or does not an- swer , or if you w ant to ret urn to the first call bef ore answ ering... : P ress to confirm. or Enter the code f or ret urning to the fir st call. W ait to ret urn. P roceed with the conv ersation. RETURN TO HELD CALL? 0 * oi.book Seite 46 Mittwoch, 1 ...

  • Siemens HIPATH HIPATH 1190 - page 47

    Features used during Call 47 Step by step T oggle The toggle f eature allo ws switc hing conv ersations be- tween tw o calls. Required : A consul t ation is in progr ess. > : Select and press to confirm. or Pr ess this ke y . Enter the code f or switching betw een t w o calls. or Pr ess the "T O GG LE" k ey . W ait to ret urn. Pr oceed ...

  • Siemens HIPATH HIPATH 1190 - page 48

    Step by step Features used during Call 48 Pa r k i n g 1 T he P arking f eatur e can place up to 1 0 internal or e x ter- nal calls on hold and answ er these at any e xtension. Required: A call is in pr ogress. P ress this ke y . > : Select and pr ess to confirm. or Enter the code f or answ ering a call. or P ress the "P ARK" k ey . .. ...

  • Siemens HIPATH HIPATH 1190 - page 49

    Features used during Call 49 Step by step Suffix Dialing 1 Suf fix Dialing allows an e xtension to send inf ormation or MF commands during a call (e.g ., f or telebanking).). Required: T here is a call in progr ess and the s ystem ac- cessed is read y to receiv e inf ormation/ codes. Enter the inf ormation requested b y the ans wering ser- vice. W ...

  • Siemens HIPATH HIPATH 1190 - page 50

    Step by step Features used during Call 50 Reco vering a Call on Hold T his f eatur e allo ws to reco ver a call that was placed on hold f or consultation when the consultation destination is bus y or there is no ans wer . Once the call is resumed the destination is disconnect- ed. Required: A consultation or transf er was completed and the destinat ...

  • Siemens HIPATH HIPATH 1190 - page 51

    Functions u sed for Rece iving Calls 51 Step by step Fu nct ions used for Receiving Calls Answ ering Calls Extensions receiv e dif f erent ringing signals and tones depending on the type of call being receiv ed and the specified country set ting . F or example, some types of ringing signals are: • When receiving an internal call or callbac k, the ...

  • Siemens HIPATH HIPATH 1190 - page 52

    Step by step Functions used for Receiving Calls 52 ... with a Headset Required: A headset must be connected. A ke y has been programmed f or the "Headset" f eatur e or the headset has an electr onic control button that acts as t he hook (see Headset f eatur e) . T he e x tension r eceiv es a call ringing signal. A headset does not receiv ...

  • Siemens HIPATH HIPATH 1190 - page 53

    Functions u sed for Rece iving Calls 53 Step by step T o switch betw een calls ( Æ page 47)... > : Select and press to confirm. or Pr ess this ke y . Enter the code f or switching betw een t w o calls. or Pr ess the "T O GG LE" k ey . W ait to ret urn. Pr oceed with the conv ersation. Pic kup Group 1 The Group Pic kup f eature allo ws ...

  • Siemens HIPATH HIPATH 1190 - page 54

    Step by step Functions used for Receiving Calls 54 Individual T he Individual Pic kup f eature allo ws a sy stem extension to answ er a call that rings in a dif f erent kno wn e x tension number . Required: A known e xtension is ringing. P ress this ke y . > : Select and pr ess to confirm. or P ress this ke y . Enter the code f or Individual Pic ...

  • Siemens HIPATH HIPATH 1190 - page 55

    Functions u sed for Rece iving Calls 55 Step by step Call Forwar ding 1 It allow s rer outing an incoming call to a specified e xten- sion, group or external number . Internal Internal Call F orwarding r eroutes calls made to an e x- tension to another specified e xtension or to a V oice Mail Server , Call Group (CG) or F ax/DID . > : Select and ...

  • Siemens HIPATH HIPATH 1190 - page 56

    Step by step Functions used for Receiving Calls 56 W ait f or a dial tone. Enter the number you w ant to call. : P ress to confirm. When there is no ans wer 1 T he Call F orwarding - No Answ er f eature allo ws rerout- ing a call made to a specific extension to another e xten- sion, a V oice Mail Subscriber Gr oup or an e x ternal num- ber , af ter ...

  • Siemens HIPATH HIPATH 1190 - page 57

    Functions u sed for Rece iving Calls 57 Step by step For Fax/DID 1 When a F ax/DID module is installed, calls can be f or- war ded to A uto-Answ ering Mode. Enter the type of Call F orw arding wanted: 1 . - Immediate Call F orwarding 2. - Call F orwar ding - No Answ er Enter the Call F orwar ding destination number . 1 . - F ax Call f orward to F A ...

  • Siemens HIPATH HIPATH 1190 - page 58

    Step by step Functions used for Receiving Calls 58 Conditional 1 Incoming calls can be f orwarded to a specified destina- tion, as configured in an y TSP -t ype (T API Service P ro vid- ers) application, suc h as W indo w s T API Br owser: P re vi- ous list or Unconditional Call F orwarding set tings will be ov erwrit ten by the ne w list set tings ...

  • Siemens HIPATH HIPATH 1190 - page 59

    Functions u sed for Rece iving Calls 59 Step by step D eactivating Call Forwarding Thi s f eatur e allo ws an e xtension to resume answ ering incoming calls. Internal/External Pr ess this ke y . > : Select and press to confirm. > : or Enter the code f or deactivating Call F orwar ding . Conditional Pr ess this ke y . > : Select and press t ...

  • Siemens HIPATH HIPATH 1190 - page 60

    Step by step Functions used for Receiving Calls 60 Do N o t D i st u r b 1 T he Do Not Dist urb f eature prev ents internal and exter- nal calls from being directed to an e xtension while al- lo wing it to make calls. When the handset is lif ted there is a distinctiv e dial tone to remind the user that the f ea- t ure is activated. P ress this ke y ...

  • Siemens HIPATH HIPATH 1190 - page 61

    Functions u sed for Rece iving Calls 61 Step by step V oice Mail 1 V oice Mail is an inf ormation tool designed to facilitate communications within and outside of organizations. It is similar to electronic mailing, f axing , etc. T he char ac- teristic f eatur e of V oice Mail is that communications are carried out b y means of voice. Mor e specifi ...

  • Siemens HIPATH HIPATH 1190 - page 62

    Step by step Functions used for Receiving Calls 62 External Serv er A V oice Mail Serv er outsourced to a local carrier w orks f or specified ex tensions grouped as a "External MWI Group" during the configur ation of the sy stem. When there is a message in the mailbox, the e xtensions that belong to this group r eceive a MWI (Message W ai ...

  • Siemens HIPATH HIPATH 1190 - page 63

    Functions u sed for Rece iving Calls 63 Step by step or Enter the code f or programming a ke y . Select a progr ammable k ey . : Pr ess to confirm. > : Select and press to confirm. : Pr ess to confirm. or > : Select and press to confirm. Programmi ng a Ke y as a MWI for the Ext ernal S erver 1 A programmable telephone k ey is assigned as an i ...

  • Siemens HIPATH HIPATH 1190 - page 64

    Step by step Functions used for Receiving Calls 64 Activating the Recept ion of an Internal MWI 1 When a Subscriber Gr oup is prog rammed as a VMIe Group Interf ace, it becomes a V oice Mail Subscriber Group that can be enabled f or signaling the moment a new message is waiting (see P rogramming an Exten- sion - VMIe Group Interf ace in the P rogra ...

  • Siemens HIPATH HIPATH 1190 - page 65

    Functions u sed for Rece iving Calls 65 Step by step Lif t the handset. or Pr ess this ke y . The LED t urns on. or Select this k e y . Enter the dir ect access code ( V oice Mail Subscriber Group) f or the V oice Mail sy stem (e.g ., 790). W ait f or the V oice Mail to ans w er the call. Pr oceed with what you w ant to do by f ollowing the in - st ...

  • Siemens HIPATH HIPATH 1190 - page 66

    Step by step Functions used for Receiving Calls 66 Entry V oice Mail (EVM) T he HiP ath 1 1 00 can be equipped with an integr ated v oice recording capability f or Entry V oice Mail . Y our local Suppor t T echnician can configur e up to 24 standard mailbox es, 2 of which can be f or f orwar ding (Da y/Night Service message). T w o parallel actions ...

  • Siemens HIPATH HIPATH 1190 - page 67

    Functions u sed for Rece iving Calls 67 Step by step Configuring a P ersonal Mailbox If the Support T ec hnician has not already configur ed your per sonal mailbox. Required: A utomatic mailbox configur ation has been authoriz ed by the s ystem’ s Support T echnician. Enter the code f or "Entry V oice Mail" (def ault = 790). Enter the p ...

  • Siemens HIPATH HIPATH 1190 - page 68

    Step by step Functions used for Receiving Calls 68 Chec king your P ersonal V oice Mailbox Messages stored in y our mailbox ar e indicated on y our telephone as f ollo ws: • An audible tone is heard when y ou lif t the handset. • T he "Mailbox" ke y blinks, if appropriately configured f or this f eatur e Æ page 62. • T he number of ...

  • Siemens HIPATH HIPATH 1190 - page 69

    Functions u sed for Rece iving Calls 69 Step by step Fr om an external telephone Connect to y our HiPath 1 1 0 0. Enter the MSN designated to your EVM b y the sy stem’ s Support T ec hnician (c heck with the Support T echnician). or If Call F orwarding to Entry V oice Mail is activ ated: + Enter y our external number (MSN) and press the Star (*) ...

  • Siemens HIPATH HIPATH 1190 - page 70

    Step by step Functions used for Receiving Calls 70 Groups 1 A Group consists of e xtensions joined by type or pr o x- imity . Its goal is to pre vent calls fr om going unans we red when an e xtension is busy or absent. Call Groups (CG) When a call to a Call Gr oup (CG) is receiv ed, it rings at all the extensions f or that group. The first user (te ...

  • Siemens HIPATH HIPATH 1190 - page 71

    Functions u sed for Rece iving Calls 71 Step by step Hunt Group (HG) and Call Gr oup (CG) Login and Logout 1 Hunt Group (HG) and Call Gr oup (CG) login and logout allow an extension to join or e xit one or more of it s groups at an ytime. Group Login/Log out > : Select and press to confirm. or > : or or Enter your group login (ON) or logout ( ...

  • Siemens HIPATH HIPATH 1190 - page 72

    Step by step Functions used for Receiving Calls 72 If a name has been stor ed for this group, it will be dis- play ed (if configured b y the sy stem’ s Suppor t T echni- cian). or If an X does not appear , it means that the ringing signal is disabled. or Enter the Call Group number . • to = Call Group (CG); or Enter the Hunt Group number . • ...

  • Siemens HIPATH HIPATH 1190 - page 73

    Functions u sed for Rece iving Calls 73 Step by step UCD Subscriber Groups 1 Eac h UCD (Uniform Call Distribution) Subscriber Group is f ormed by a maxi mum of 32 extensions. T hese exten- sions are assigned to answ er calls destined to a specific number that identifies the group. The users of thes e extensions are called A gents. Calling a UCD Gro ...

  • Siemens HIPATH HIPATH 1190 - page 74

    Step by step Functions used for Receiving Calls 74 In the ev ent that the extension bel ongs to mor e than one Group > : Select and pr ess to confirm. or > : or or Enter the code to login or logout of the UCD group. or P ress the "UCD GP L OGON/L O GOF" key . or If an X ap pears next to the gr oup number (e.g., 790) it means that th ...

  • Siemens HIPATH HIPATH 1190 - page 75

    Functions u sed for Rece iving Calls 75 Step by step > : Select and press to confirm. The ringing signal f or all groups is enabled/disabl ed. A v ailable/Unavailable Ag ent for a UCD Gr oup Enables an A gent to star t receiv ing calls within a group or to stay a wa y from the group, f or example, in the ev ent of a meeting . A vailable/Una vail ...

  • Siemens HIPATH HIPATH 1190 - page 76

    Step by step Functions used for Receiving Calls 76 Collect Call Barring When this f eature is activ ated, the s y stem automatically rejects all incoming collect calls ov er a digital line. Calls rece ived o ver an analog line ar e r ejected only at the mo- ment the y are answ ered. T ypes of Collect Call B arring: • Collect Call B arring b y Ext ...

  • Siemens HIPATH HIPATH 1190 - page 77

    Miscellaneous Fu nction s 77 Step by step Miscellaneous F unctions Changing the P assw ord for the Elec- tronic Loc k Thi s is a security f eature that pr otects against unautho- rized use b y setting a per sonal passw ord. Pr ess this ke y . > : Select and press to confirm. or Enter the code f or changing the pass w ord. Enter the curr ent 5-di ...

  • Siemens HIPATH HIPATH 1190 - page 78

    Step by step Miscellaneou s Functions 78 > : Select and pr ess to confirm. or > : or or Enter the code f or deactivating the elect ronic lock. Enter your 5-digit passw ord (the def ault is: 00 00 0). T he displa y sho ws that this f eatur e is enabled. or T he displa y sho ws that this f eatures is disabled. Music on Hold T his f eat ure play ...

  • Siemens HIPATH HIPATH 1190 - page 79

    Miscellaneous Fu nction s 79 Step by step Busy Signal when extension is busy Thi s f eatur es allo ws all telephones in the "Busy Signal" Group to automatically s witch to a busy signal when a member of the group has a call in progress (see P ro- gramming a Digital T runk - Bus y Signal, in the Pr ogram- ming Manual). External calls do no ...

  • Siemens HIPATH HIPATH 1190 - page 80

    Step by step Miscellaneou s Functions 80 or Enter the code f or selecting a country . Enter the country code (up to 8 digits). T he code is stor ed and the sy stem is restarted. 4 * 9 1 2 Country Code Brazil 1 4463075 Chile 30259680 P or t ugal 37 496521 V ietnam 48220818 T hailand 50692539 Ukraine 50889647 M e x i c o 5 1 9 11111 P akistan 51 951 ...

  • Siemens HIPATH HIPATH 1190 - page 81

    Miscellaneous Fu nction s 81 Step by step Relay 1 The rela y on the HiPa th 1 1 20 music module is used to control all peripher al equipment, suc h as the Door Opener , etc. Pr ess this ke y . > : Select and press to confirm. or > : or or Enter the code f or deactiv a ting the rela y . T urkey 53951 509 Latvia 23730903 Lithuania 5436990 1 Ita ...

  • Siemens HIPATH HIPATH 1190 - page 82

    Step by step Miscellaneou s Functions 82 If a F ax/DID facility w as configured... T he rela y can be controlled by a r emote MF telephone Required: T he remote te lephone must ha ve a con ver- sation in pr ogress wi th the s ystem’ s progr amming e x - tension. P ress this ke y . > : Select and pr ess to confirm. or > : or or Enter the cod ...

  • Siemens HIPATH HIPATH 1190 - page 83

    Miscellaneous Fu nction s 83 Step by step Ac knowledging/deact iv ating a Gener- al Alarm If the Support T ec hnician configured the alarm f eatur e f or your e xtension, it will ring whene ver ther e is an alarm condition on the HiP ath 1 1 0 0. Answ er the call to ackno wledge that the alarm was de - tected. If the ala rm call is not ac kno wledg ...

  • Siemens HIPATH HIPATH 1190 - page 84

    Step by step Miscellaneou s Functions 84 S chedu ling T ime Reminders P ress this ke y . > : Select and pr ess to confirm. or Enter the code f or canceling the alarm cloc k. : Select and press to confirm the type of sc heduled time reminder y ou want. or > : or > : or > : or or or or Enter an option. For T ype 4 timed reminder only Ente ...

  • Siemens HIPATH HIPATH 1190 - page 85

    Miscellaneous Fu nction s 85 Step by step D eleting/Chec king a S chedu led Time Re- minder Pr ess this ke y . > : Select and press to confirm. or Enter the code f or [DELETE?][DELETE?] a T i me R e- minder . : Pr ess to confirm. or > : Select and press to confirm. S cheduled T ime Reminder Call Required: A time reminder w as scheduled. The t ...

  • Siemens HIPATH HIPATH 1190 - page 86

    Step by step Miscellaneou s Functions 86 COS (Class of S ervice) Changeo ver 1 T he COS Changeov er f eature author izes the user to use a dif f erent sy stem extension temporarily to mak e calls as if he w a s at his o wn e xtension but with a lo wer class of service. P ress this ke y . > : Select and pr ess to confirm. > : or Enter the code ...

  • Siemens HIPATH HIPATH 1190 - page 87

    Miscellaneous Fu nction s 87 Step by step > : Select and press to confirm. or > : or or Enter the code f or deactiv a ting D a ta Pr otection. Call W aiting Signaling T one Thi s f eatur e allo ws y ou to activate/deactiv ate the auto- matic sending of a signal (call waiting) f or a second call when a conv ersation is in progr ess. Required: ...

  • Siemens HIPATH HIPATH 1190 - page 88

    Step by step Miscellaneou s Functions 88 Room Monit or 1 A R oom Monitor (Bab yphone) uses a telephone hand- set as a microphone to capt ure au dio signals in a room. To a c t i v a t e P ress this ke y . > : Select and pr ess to confirm. or Enter the code f or activating the R oom Monitor feat ure. Lif t the handset and position it tow ards the ...

  • Siemens HIPATH HIPATH 1190 - page 89

    Miscellaneous Fu nction s 89 Step by step W ait f or a continuous tone (if necessary , switc h to DT- MF) then enter y our internal number and the loc k’ s passw ord. Enter the number f or the e xtension to be monitored. W ait. T he user calls the e xtension assigned to the f ea- t ure to hear the audio signals pr esent. Night S ervice 1 The Nigh ...

  • Siemens HIPATH HIPATH 1190 - page 90

    Step by step Miscellaneou s Functions 90 Call Forwar ding when there is no an- sw er on a for digit al lines In some circumstances incoming calls o ver an digital line are f orwar ded to an Ov erflo w ex tension af ter a specified timeout. 1 . When no MSN number is assigned to an extension number . 2. When a MSN number is assigned to an e xtension ...

  • Siemens HIPATH HIPATH 1190 - page 91

    Miscellaneous Fu nction s 91 Step by step D oor Opener 1 The Door Opener f eat ure al lows a pr ogrammed e xten- sion to open a specified door . Required: T he call is made to the Entrance T elephone. Lif t the handset. or Pr ess this ke y . The LED t urns on. : Pr ess to confirm. or Pr ess this ke y . > : Select and press to confirm. or Enter t ...

  • Siemens HIPATH HIPATH 1190 - page 92

    Step by step Miscellaneou s Functions 92 Remote Configur ation 1 T he R emote Configuration f eatur e allows f or the remote configuration of the HiP ath 1 1 00. Using a MF T elephone Required: The pr ogramming extension must have a conv ersation in pr ogress wit h the remote pr ogrammer . P ress this ke y . > : Select and pr ess to confirm. > ...

  • Siemens HIPATH HIPATH 1190 - page 93

    Miscellaneous Fu nction s 93 Step by step Using the HiP ath 1 1 00 Manager application 1 Required: • Analog line: The system’s serial port as well as the remote PC must be connected to a modem with ac- cess to the telephone network. • Digital line: The S 0 Option Module must be connect - ed to a ISDN-type digital line, and the remote PC must ...

  • Siemens HIPATH HIPATH 1190 - page 94

    Step by step Miscellaneou s Functions 94 Associated Group 1 T he Executiv e/Secretary pro vides quic k access to ex- tensions that must communicate continually . With this f eat ure you can assign many non-Ex ecutive e xtensions (Secretaries) to a single telephone (Ex ecutive . Required: The A ssociated Group f eatur e must be con- figured (see P r ...

  • Siemens HIPATH HIPATH 1190 - page 95

    Miscellaneous Fu nction s 95 Step by step Call Charg e Consultation 1 If call char ges f or calls made hav e been established, the sy stem will ha v e the ability to sho w the totals f or the calls on the displa ys of s ystem telephones. For the current call: The call c harge is shown on the displa y at the end of the call (Standard ) If y ou would ...

  • Siemens HIPATH HIPATH 1190 - page 96

    Step by step Miscellaneou s Functions 96 Pro g r am m i n g t h e K e ys 1 T he K e y P rogramming f eature allo ws an ex tension to assign functions to a s ystem telephone ’ s programma- ble k e ys. This can also be accomplished using the Hi- P ath 1 1 00 Manager application. P rocedure for pr ogr amming the key s P ress this ke y . > : Selec ...

  • Siemens HIPATH HIPATH 1190 - page 97

    Miscellaneous Fu nction s 97 Step by step Features for P rogrammable Key s Pr ogrammable ke ys can be set to enable the f ollowing f eat ures: The f eatur e can now be activ ated by pr essing the ke y . F or f eatur es that can be activ ated or deacti- vated, suc h as "DO NO T DIS TURB", simply press the appropriate k ey once to activ ate ...

  • Siemens HIPATH HIPATH 1190 - page 98

    Step by step Miscellaneou s Functions 98 ” Anon ymous Caller ID (Call T race)” Æ page 1 08 ”Message W aiting Indicator (MWI)” Æ page 62 ”O v e r r i d e” Æ page 34 ”Caller Lists” Æ page 29 ”Hunt Group (HG) and Call Group (CG) Login and L o- gout” Æ page 7 1 ”UCD Group L ogin/Logout” Æ page 73 ”Storing a phone number ...

  • Siemens HIPATH HIPATH 1190 - page 99

    Miscellaneous Fu nction s 99 Step by step P rogramming th e Pr ocedur e Key Y ou can store numbers and functions that incl ude more than one action, that is, you can assign multiple com- mands to a single telephone k ey . Thus it is possible, f or inst ance, to stor e a ”Cost Code ” Æ page 50 function with all its required data (cost code + ex ...

  • Siemens HIPATH HIPATH 1190 - page 100

    Step by step Miscellaneou s Functions 10 0 P rint ing Key Labels T his f eatur e allows you to print labels f or programmable k e ys accor ding to the functions f or which the y are con- figured, including Operator T erminal functions. T his service is av ailable on HiPath 1 1 00 Manager (A d- v a nced Configur ation -> Pr ogramming the K e ys - ...

  • Siemens HIPATH HIPATH 1190 - page 101

    Miscellaneous Fu nction s 101 Step by step > : Select and press to confirm. : Pr ess to confirm. or If y ou make a mistak e: > : Select and press to confirm. All digits that wer e entered will be deleted. : Pr ess to exit. Deleting Ke y Assignment Pr ess this ke y . > : Select and press to confirm. or Enter the code f or programming a ke y ...

  • Siemens HIPATH HIPATH 1190 - page 102

    Step by step Miscellaneou s Functions 102 Headset 1 It is an accessory that can be installed on terminals to replace the use of the handset and pro vide the user with more comf or t and with hand-fr ee operation. Models with electronic hook control (suc h as Siemens Elipse 1 .8 EHS and GN Netcom 91 20) f or answering calls using a headset must use ...

  • Siemens HIPATH HIPATH 1190 - page 103

    Miscellaneous Fu nction s 103 Step by step Required: A headset must be connect ed. A k ey must be progr ammed f or the Headset f eat ure b y”Progr am- ming the K e y s” Æ page 96 selecting HEADSET ON on the menu, unless the headset has an electronic hook switc h. For m ak in g a ca l l Pr ess the HEADSE T ON k e y or the electr onic hook con- ...

  • Siemens HIPATH HIPATH 1190 - page 104

    Step by step Miscellaneou s Functions 104 Storing a phone numb er in a program- mable ke y F or each k ey on the telephone set or additional terminal that has not been pr ogrammed y ou can store a tele- phone number that y ou dial frequently . S ystem T elephone with a display . P ress this ke y . > : Select and pr ess to confirm. or Enter the c ...

  • Siemens HIPATH HIPATH 1190 - page 105

    Miscellaneous Fu nction s 105 Step by step D ate and T ime Settings If authoriz ed, you can set the HiP ath 1 1 00 date and time. The date and time can be sho wn on your s y stem telephone displa y . Pr ess this ke y . > : Select and press to confirm. > : Enter the date (da y , month and year) in a 6- digit f ormat. F or example, 1 1 0903 f o ...

  • Siemens HIPATH HIPATH 1190 - page 106

    Step by step Special funct ion s for IS DN lines 106 Special functions for ISDN lines Call Forwar ding on a Digit al Line T he Call F orwarding on a Digit al Line f eature allo ws re- routing call s to an external number . > : Select and pr ess to confirm. or Enter the code f or activ a ting Call F orwar ding . : Enter the type of Call F orwar d ...

  • Siemens HIPATH HIPATH 1190 - page 107

    Special functions for ISDN lines 107 Step by step D eactivation of Call Forwar ding > : Select and press to confirm. or Enter the code f or deactivating Call F orwar ding . : Enter the type of Call F orw arding wanted. or > : or > : or or or Enter an option. Enter the Call F orwarding MSN. : Pr ess to confirm. or If y ou make a mistak e: & ...

  • Siemens HIPATH HIPATH 1190 - page 108

    Step by step Special funct ion s for IS DN lines 108 Anonymous Caller ID (Call T race) 1 Allo ws a local carrier to identify e xternal and malicious anonymous caller s. The caller ID can be determined during a call or up to 30 seconds af ter the call. How e v er , it is critical that the handset r emains of f the hook. Required: An e xternal call i ...

  • Siemens HIPATH HIPATH 1190 - page 109

    Special functions for ISDN lines 109 Step by step Using Features pro vided by a Carrier ov er an ISDN Network In some countries y ou may access f eatur es of fer ed by a local carrier f or ISDN lines (ask your s ystem’ s tec hnical support personnel f or more inf ormation). Pr ess this ke y . > : Select and press to confirm. > : or Enter th ...

  • Siemens HIPATH HIPATH 1190 - page 110

    Step by step Practical Guide 110 P ractical Guide Care of the T elephone • T o clean the telephone use a slightly damp cloth or an antistatic cloth. Nev er wipe the phone with a dry cloth! • If necessary , you may use a diluted mild detergent (commercially a vailable). Af ter cleaning , thoroughly remo ve the detergent using a cloth dampened wi ...

  • Siemens HIPATH HIPATH 1190 - page 111

    Practical Guide 111 Step by step S ystem Error Messages Thi s function pro vides indication that an err or occurred in the s ystem. T he err or is signaled on the ke ys and on the displa y s of s ystem telephones. Required: S ystem T elephone with a display . Select the ke y programmed f or indicating system er ror messages. > : Navigate thr oug ...

  • Siemens HIPATH HIPATH 1190 - page 112

    Step by step Practical Guide 112 Display Messages T his f eature sho ws on the telephone dis play inf orma- tion about actions perf ormed by the user . P ossible cause: T his message confirms that an error has occurr ed. P ossible cause: Memory space a v ailable f or tick ets is full. T ick ets will be ov erwrit ten. P ossible cause: DIS A passw or ...

  • Siemens HIPATH HIPATH 1190 - page 113

    113 Index Index A Acknowledging/Deactivating a General Alarm Deactivating a General Alarm ............... 83 ACS ............................................................... 39 Alarm clock .................................................. 83 deleting/checking a scheduled time ... 85 schedule timed reminders .................... 84 scheduled tim ...

  • Siemens HIPATH HIPATH 1190 - page 114

    114 Index Functions for making calls using a specific line ............................. ... 23 Functions used during Calls ..................... 44 Functions used during calls conference ........................................... ... 47 consultation ............................................. 44 cost code ....................................... ...

  • Siemens HIPATH HIPATH 1190 - page 115

    115 Index Miscellaneous functions acknowledging/deactivating a General Alarm ........................................................ 83 alarm clock .............................................. 83 Associated Group ................................... 94 busy signal when extension is busy ... 79 call waiting signaling tone ..................... 87 ...

  • Siemens HIPATH HIPATH 1190 - page 116

    116 Index U UCD Agent in Service/Out of Service .... 75 Urgent call/recall when busy .................... 35 Using ............................................................ 13 Using a specific lin e ................................... 23 Using a temporary MSN for making a call ..................................... ........................ 43 V V ...

  • Siemens HIPATH HIPATH 1190 - page 117

    Terminals, Adapters and Accessories 117 T erminals, Adapt ers and Accessories Using options impro ves perf ormance and provides mor e comf ort to the user during wor k. A dditional optiP oint T erminals: Ad ditonal terminals pr ovide increased conf or t, ef ficiency and saf ety . T he f ollowing terminals ar e supported: optiP oint ke y module, opt ...

  • Siemens HIPATH HIPATH 1190 - page 118

    Feature Codes 118 Feature Codes Sy m b o l s Numbering Plan Sy m b o l s Explanation , , ... Enter number s, ke ys, pass w ord, internal or e xternal numbers, etc. Signaling with a short beep / Lif t/Repl ace the handset Initiate con versation X and Y Numeric v ariables Service Menu Pr ogrammable k ey LED ON Pr ogrammable ke y LED OFF Pr ogrammable ...

  • Siemens HIPATH HIPATH 1190 - page 119

    Feature Codes 119 Feat ur es F eatur es can be selected as f ollo ws: 1 . Using the Navig ation ke ys in the Main Menu 2. Using the Service Menu ke y then browsing the f eature option list 3. Using the Service Menu ke y and the appropriate F eature Code 4. Using a programmable k ey 5. Using a Fe atur e Code F eatur e Code S ystem T elephone Feat ur ...

  • Siemens HIPATH HIPATH 1190 - page 120

    Feature Codes 120 Internet A ccess Ac tiv ation external line Internet A ccess Deactiva tion external line External Line Reser vation Busy 1) W ai t f or Phone rin gs external or 2) Phone rings external Functions Used for Making Calls S ystem Speed Dial + ... Individual Speed Dial + (“X” is from 4 to 9) Individual Speed Dialing P rogramming + : ...

  • Siemens HIPATH HIPATH 1190 - page 121

    Feature Codes 121 W armline (If progr ammed) Wa i t fo r Override busy e xtension bus y extension Silent Monitoring busy e xtension bus y extension Callback T o activate (Extension does not answ er or is busy) 1º) no ans wer : or . W ait f or . Phone rings or 2) W a it f or . W ait f or . The telephone rings. Callback Deactiva tion Carrier Using a ...

  • Siemens HIPATH HIPATH 1190 - page 122

    Feature Codes 122 Tr a n s f e r (When an ext ernal analog line programmed as “T ype of An- sw ering Signal ” or a digital line is being used, you must w ait f or an ans w er bef ore tr ansf er- ring the call. F or transf ers with- out consultation, there is no need to wait bef ore answ ering) Internal extension External < > : number ( ) ...

  • Siemens HIPATH HIPATH 1190 - page 123

    Feature Codes 123 Consultation fr om another extension VM Group passwor d ex tension Consultation fr om an exter - nal extension your e xternal number + passw ord e x- tension Miscellaneous functions Door opening and closing (Af ter answer b y the Entr ance T elephone) General Alarm Deactiva ting password Electronic Loc k P asswor d Change current ...

  • Siemens HIPATH HIPATH 1190 - page 124

    Feature Codes 124 Music o n Hold Deactiva tion Remote Configuration HiP ath 1 1 00 Manager Remote configur ation using a standard MF tele- phone 1) Progr amming extension must ha v e a con ver sation in progress with the remot e progr ammer: Remote programmer must pr o vide: passw ord progr amming codes. or 2) Remote pr ogrammer dials into the sy s ...

  • Siemens HIPATH HIPATH 1190 - page 125

    Feature Codes 125 Alarm C lock Daily , ex cept w eek ends time (e.g ., 1 230) : Alarm C lock Af ter a specified time period time (e.g ., 1 230) : Alarm cl ock F or a specified date and time date/time (e. g., 241 21 830) : Alarm cl oc k Deactiva ting : UCD Subscriber Group Functions Ag ent A v ailable Ag ent Unav ailable Calling a UCD Subscriber Gro ...

  • Siemens HIPATH HIPATH 1190 - page 126

    Feature Codes 126 Call F orw arding for MSN when the line is busy Act i vat io n external MSN Call F orwar ding - Busy , for MSN De activa tion Anon ymous Caller ID (T race) Restriction for sending MSN Act i vat io n Restriction for sending MSN Deactiva tion Using Feat ures pro vided by a Carrier on ISDN Lines external line I SDN cod e Notes: • F ...

  • Siemens HIPATH HIPATH 1190 - page 127

    © Siemens Ltda. Siemens Communications Rua Pedro Gus so, 2635 • Curitiba-PR/BR Ref. No.: A310 03-K1160-B801-7 -7619 Subject t o availability . Right of modification reserved. 16.08.06 V6 .0 www .siemens.com/hipath The information in this document provide s only general descriptions of the features. The actual features may not correspond exactly ...

Manufacturer Siemens Category Telephone

Documents that we receive from a manufacturer of a Siemens HIPATH HIPATH 1190 can be divided into several groups. They are, among others:
- Siemens technical drawings
- HIPATH HIPATH 1190 manuals
- Siemens product data sheets
- information booklets
- or energy labels Siemens HIPATH HIPATH 1190
All of them are important, but the most important information from the point of view of use of the device are in the user manual Siemens HIPATH HIPATH 1190.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Siemens HIPATH HIPATH 1190, service manual, brief instructions and user manuals Siemens HIPATH HIPATH 1190. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Siemens HIPATH HIPATH 1190.

Similar manuals

A complete manual for the device Siemens HIPATH HIPATH 1190, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Siemens HIPATH HIPATH 1190 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Siemens HIPATH HIPATH 1190.

A complete Siemens manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Siemens HIPATH HIPATH 1190 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Siemens HIPATH HIPATH 1190, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Siemens HIPATH HIPATH 1190, that we can find in the current document
3. Tips how to use the basic functions of the device Siemens HIPATH HIPATH 1190 - which should help us in our first steps of using Siemens HIPATH HIPATH 1190
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Siemens HIPATH HIPATH 1190
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Siemens HIPATH HIPATH 1190 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Siemens HIPATH HIPATH 1190?

Use the form below

If you did not solve your problem by using a manual Siemens HIPATH HIPATH 1190, ask a question using the form below. If a user had a similar problem with Siemens HIPATH HIPATH 1190 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)