Manual Antec P180B Fan

9 pages 0.07 mb
Download

Go to site of 9

Summary
  • Antec P180B Fan - page 1

    P180B User’s Manual Manuel de l’utilisateur Anwenderhandbuch Manuale per l’operatore Manual del usuario পᡅ䂀ᯢ᳌ ...

  • Antec P180B Fan - page 2

    1 At Antec, we continually refine and improve our products to ensure the highest quality. So it’s possible that your new case may differ slightly from the descrip- tions in this manual. This isn’t a problem; it’s simply an improvement. As of the date of publication, all features, descriptions, and illustrations in this manual are correct. P18 ...

  • Antec P180B Fan - page 3

    2 6. Place your motherboard on the brass standoffs. 7. Screw in your motherboard to the standoffs with the provided Philips-head screws. Your motherboard is now installed. Front Bezel Connectors 1. Connect the Reset switch (labeled RESET SW) to your motherboard at the RST connector. The white wire for each connector should be on the ground pin. 2. ...

  • Antec P180B Fan - page 4

    3 Note: Please check your motherboard manual for your IEEE 1394 header pin layout and make sure it matches the attached table. If you intend to connect the front FireWire port to an IEEE 1394 add-on card that comes with an external-type IEEE 1394 connector, please call Antec customer service at (800) 22ANTEC (North America) or +31 (0) 10 462-2060 ( ...

  • Antec P180B Fan - page 5

    4 3. There are two HDD trays inside the cage. Squeeze the metal clips on each side of a tray and slide it out. 4. Mount your hard drive to the drive tray with the special screws provided. Don’t over-tighten the screws since that could decrease the grommets’ ability to absorb vibration and noise. Note: Always mount the hard drive with the thicke ...

  • Antec P180B Fan - page 6

    5 5. Please refer to the power supply installation section, to route the power cables to your devices. Once you’ve done so, connect the appropriate power connec- tors to your device. Installing the power supply 1. With the case upright and both side panels removed (see Setting Up), remove the screws on both sides of the power supply retaining cag ...

  • Antec P180B Fan - page 7

    6 These two fans are mounted so that the air is blowing out of the case. The top fan comes with a spoiler to mount on the top of the case. To install the spoiler: 1. With the spoiler open end facing the rear of the case, carefully align the tabs of the spoiler with the notches on the case. 2. Insert the tabs into the notches and slide the spoiler t ...

  • Antec P180B Fan - page 8

    7 The Optional Fans There are two optional 120mm fan mounts — the front fan (located in front of the upper HDD cage) and the middle fan (located inside the upper HDD cage). These two fans should be installed so that the air is blowing into the case from the front. The Front Fan — The front fan is provided to enhance the HDD cooling of any drive ...

  • Antec P180B Fan - page 9

    Antec, Inc. 47900 Fremont Blvd. Fremont, CA 94538 USA tel: 510-770-1200 fax: 510-770-1288 Antec Europe B.V. Stuttgartstraat 12 3047 AS Rotterdam The Netherlands tel: +31 (0) 10 462-2060 fax: +31 (0) 10 437-1752 Technical Support: US & Canada 1-800-22ANTEC customersupport@antec.com Europe +31 (0) 10 462-2060 europe.techsupport@antec.com www.ante ...

Manufacturer Antec Category Fan

Documents that we receive from a manufacturer of a Antec P180B Fan can be divided into several groups. They are, among others:
- Antec technical drawings
- P180B Fan manuals
- Antec product data sheets
- information booklets
- or energy labels Antec P180B Fan
All of them are important, but the most important information from the point of view of use of the device are in the user manual Antec P180B Fan.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Antec P180B Fan, service manual, brief instructions and user manuals Antec P180B Fan. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Antec P180B Fan.

Similar manuals

A complete manual for the device Antec P180B Fan, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Antec P180B Fan by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Antec P180B Fan.

A complete Antec manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Antec P180B Fan - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Antec P180B Fan, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Antec P180B Fan, that we can find in the current document
3. Tips how to use the basic functions of the device Antec P180B Fan - which should help us in our first steps of using Antec P180B Fan
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Antec P180B Fan
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Antec P180B Fan in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Antec P180B Fan?

Use the form below

If you did not solve your problem by using a manual Antec P180B Fan, ask a question using the form below. If a user had a similar problem with Antec P180B Fan it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)