English dropdown-ico

Manual Miele KM2335

60 pages Not applicable
Download

Go to site of 60

Summary
  • Miele KM2335 - page 1

    Operating and installation instructions Gas hobs To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time. M.-Nr. 09 697 380 e n-G B ...

  • Miele KM2335 - page 2

    G This appliance can be used in countries other than those specified on the appliance. It is, however, set up for connection to the gas and electricity supplies in the countries specified. For use in other countries please contact the Miele spare parts or customer service department in your country. D Das Gerät ist auch für den Gebrauch in andere ...

  • Miele KM2335 - page 3

    Gas-heated appliances Safety precautions to take if you smell gas ß Turn off the gas emergency control valve immediately. This is usually located near the gas meter. ß Eliminate all sources of ignition in a safe manner. Do not smoke, light cigarette lighters or matches. ß Do not operate electrical lights or switches, i.e. do not switch them &quo ...

  • Miele KM2335 - page 4

    Guide to the appliance .............................................6 KM 2312 ..........................................................6 KM 2334 / KM 2335 .................................................7 Accessories supplied ...............................................9 Warning and Safety instructions ....................................1 0 C ...

  • Miele KM2335 - page 5

    Conversion to another type of gas ...................................5 2 Jet table .........................................................5 2 To change the main jets ............................................5 3 To change the small jets ............................................5 5 Function test ............................................... ...

  • Miele KM2335 - page 6

    KM 2312 a Wok burner b Large burner c Small burner d Pan support (two-part) Controls: e Left f Back right g Front right Guide to the appliance 6 ...

  • Miele KM2335 - page 7

    KM 2334 / KM 2335 a Small burner b Medium burner c Wok burner d Medium burner e Medium burner f Pan support (in three sections) Controls: g Front left h Back left i Middle j Back right k Front right Guide to the appliance 7 ...

  • Miele KM2335 - page 8

    Burner Wok burner a Outer burner cap b Inner burner cap c Burner head d Burner base e Ignition safety device f Ignitor Small, medium and large burners a Burner cap b Burner head c Ignition safety device d Ignitor e Burner base Guide to the appliance 8 ...

  • Miele KM2335 - page 9

    Accessories supplied The accessories supplied with your appliance as well as a range of optional ones are available to order from Miele (see "Optional accessories"). Wok ring The Wok ring supplied with your appliance can be used in instances where extra stability is required. It is particularly suitable for Woks with a rounded base. Combi ...

  • Miele KM2335 - page 10

    This appliance complies with all relevant local and national safety requirements. Improper use of the appliance can, however, present a risk of both personal injury and material damage. To avoid the risk of accidents and damage to the appliance, please read these instructions carefully before installation and using it for the first time. They conta ...

  • Miele KM2335 - page 11

    Safety with children ~ This appliance is not a toy! To prevent the risk of injury, do not allow children to play with it or use the controls. Please supervise children whilst you are using the appliance. ~ Children under 8 years of age must be kept away from the hob unless they are constantly supervised. ~ Children 8 years and older may only use, c ...

  • Miele KM2335 - page 12

    Technical safety ~ Before installation, check the appliance for visible signs of damage. Do not install and use a damaged appliance. It could be dangerous. ~ The electrical safety of this appliance can only be guaranteed if correctly earthed. It is most important that this basic safety requirement is observed and tested regularly, and where there i ...

  • Miele KM2335 - page 13

    ~ Never open the outer casing of the appliance. Tampering with electrical connections or components and mechanical parts is highly dangerous to the user and can cause operational faults. ~ Installation, maintenance and repairs may only be carried out by a suitably qualified and competent person in strict accordance with current national and local s ...

  • Miele KM2335 - page 14

    ~ In areas which may be subject to infestation by cockroaches or other vermin, pay particular attention to keeping the appliance and its surroundings in a clean condition at all times. Any damage which may be caused by cockroaches or other vermin will not be covered by the guarantee. Correct use ~ The appliance gets hot when in use and remains hot ...

  • Miele KM2335 - page 15

    ~ Do not use the appliance as a resting place for anything else. The article could melt or catch fire if residual heat is still present or if the appliance is switched on by mistake. ~ Do not cover the hob with, e. g. with a hob cover, a cloth or protective foil. This could present a fire hazard if the appliance is switched on by mistake or if it i ...

  • Miele KM2335 - page 16

    ~ Remove splashes of fat and other food debris from the surface as soon as possible. These are a fire hazard. ~ Replace the pan supports carefully to avoid scratching the surface of the hob. ~ Using a gas hob results in the build-up of heat, moisture and combustion products in the room in which it is installed. To ensure that there is adequate vent ...

  • Miele KM2335 - page 17

    ~ If the appliance is installed behind a kitchen furniture door, it may only be used with the furniture door open. Only close the door if the appliance is switched off. ~ If the appliance has not been used for a long period of time it should be thoroughly cleaned before it is used again. It is also advisable to have the appliance tested for safety. ...

  • Miele KM2335 - page 18

    Disposal of the packing material The packaging is designed to protect the appliance from damage during transportation. The packaging materials used are selected from materials which are environmentally friendly for disposal and should be recycled. Recycling the packaging reduces the use of raw materials in the manufacturing process and also reduces ...

  • Miele KM2335 - page 19

    Please stick the extra data plate for the appliance supplied with this documentation in the space provided in the "After sales service, data plate" section of this booklet. Cleaning for the first time ^ Remove any protective foil. ^ Clean all removable parts of the burners with a solution of warm water and a little washing-up liquid appli ...

  • Miele KM2335 - page 20

    The control is used to ignite the burner and to regulate the strength of the flame. The burners can only be switched on by pressing in the appropriate control and turning it anti-clockwise, and switched off by turning the control clockwise. The outer flame ring on the wok burner can only be switched on and off by pressing the control in and turning ...

  • Miele KM2335 - page 21

    Controls The control is used to ignite the burner and to regulate the strength of the flame. ß The gas supply is turned off & Strongest flame / Weakest flame Switching on ^ The control for the burner required must be pressed in and turned anti-clockwise to the largest flame symbol to switch on. When a control is operated, a spark is produced o ...

  • Miele KM2335 - page 22

    Regulating the flame Regulate the flame so that it does not spread out beyond the sides of the pan. As the outer part of the flame is much hotter than the centre, the tips of the flames should stay beneath the pan base. Flame tips which extend beyond the sides of the pan merely warm up the air in the room and can also damage pan handles and increas ...

  • Miele KM2335 - page 23

    Burner Min. pan base diameter in cm Small Medium Large Wok 10 10 12 15 Max. diameter at top of pan in cm Without With Combi insert Small Medium Large Wok 22 22 24 26 - - - 30 – Refer to the chart above and ensure that the pan diameter falls within the minimum and maximum diameters given for the burner you are using. A pan which is too small will ...

  • Miele KM2335 - page 24

    Wok ring The Wok ring supplied with your appliance can be used in instances where extra stability is required. It is particularly suitable for Woks with a rounded base. Make sure that the wok ring is located securely in its correct position. Combi insert The combi insert must be used if you wish to use – a pan with a smaller diameter base than th ...

  • Miele KM2335 - page 25

    – Use a pan lid whenever possible to minimise heat loss. – Cook with as little water as possible. – Cooking times are greatly reduced when using a pressure cooker. – Turn the flame down promptly to a lower setting when the pan has come to the boil. – Wide, shallow pans are preferable to tall, narrow ones. They will heat up faster. Energy ...

  • Miele KM2335 - page 26

    Thermo-electric ignition safety device This appliance is has a thermo-electric ignition safety device which cuts off the supply of gas to a burner if the flame goes out, for example if food has boiled over, or if there was a sudden draught. ^ To use the burner again, turn the control clockwise to the " ß " position, and then switch it ba ...

  • Miele KM2335 - page 27

    , Do not use a steam cleaning appliance to clean this appliance. The steam could reach electrical components and cause a short circuit. – The appliance should be cleaned after each use. Allow the appliance to cool down to a safe temperature before cleaning. – To avoid water marks and limescale deposits, use a soft cloth to dry surfaces that hav ...

  • Miele KM2335 - page 28

    Cleaning Notes Stainless steel surfaces Clean stainless steel surfaces using an E-Cloth (see "Optional accessories") or with a solution of warm water and a little washing-up liquid applied with a soft sponge. If necessary, you could use Miele ceramic and stainless steel hob cleaner (see "Optional accessories") and the scouring p ...

  • Miele KM2335 - page 29

    To assemble the small, medium and large burners ^ Place the burner head b on to the burner base e so that the ignition safety device d and the ignitor c extend through their respective holes in the burner head. The burner head must click into place correctly. ^ Place burner cap a flat over burner head b . When correctly positioned it will not slide ...

  • Miele KM2335 - page 30

    To assemble the wok burner ^ Place burner head c onto burner base d so that the ignition safety device e and the ignitor f extend through their respective holes in the burner head. The burner head must click into place correctly. ^ Place the burner caps a and b in position. ^ Important: replace parts in the correct order after cleaning. Cleaning an ...

  • Miele KM2335 - page 31

    With the help of the following notes, minor faults in the performance of the appliance, some of which may result from incorrect operation can be put right without contacting the Service Department saving you both time and money. The following guide may help you to find the reason for a fault, and to correct it. You should, however, note the followi ...

  • Miele KM2335 - page 32

    Problem Possible cause Remedy The gas flame goes out after ignition The flames are not touching the ignition safety device, it is not hot enough: - The burner is not correctly assembled. - There is dirt on the ignition safety device. Assemble the burner correctly. Remove any soiling. The flame pattern has changed The burner is not correctly assembl ...

  • Miele KM2335 - page 33

    Miele offer a comprehensive range of useful accessories as well as cleaning and conditioning products for your Miele appliances. These can be ordered online at: or from Miele (see back of manual for contact details). Cleaning products Ceramic and stainless steel hob cleaner 250 ml Removes heavy soiling, limescale deposits and light discolouration S ...

  • Miele KM2335 - page 34

    Fit the wall units and extractor hood before fitting the appliance to avoid damaging the surface. ~ The room in which the gas hob is installed must be at least 20 m 3 in size with a door or window in it which can be opened to the outside air. ~ The veneer or laminate coatings of worktops (or adjacent kitchen units) must be treated with 100 °C heat ...

  • Miele KM2335 - page 35

    Safety distance above the hob A minimum safety distance must be maintained between the hob and the cooker hood above it. See the cooker hood manufacturer's operating and installation instructions for details. If the manufacturer's instructions are not available for the cooker hood, a minimum safety distance of at least 760 mm must be main ...

  • Miele KM2335 - page 36

    Safety distances to the sides and back of the hob Ideally the hob should be installed with plenty of space on either side. There may be a wall at the rear or a tall unit or wall on one side (right or left) (see illustrations). a Minimum distance of 50 mm between the back of the worktop cut-out and the rear edge of the worktop. b Minimum distance of ...

  • Miele KM2335 - page 37

    Building-in dimensions KM 2312 a Front b Casing depth c Gas connection R 1/2 - ISO 7-1 (DIN 10226) d Mains connection box with mains connection cable, L = 2000 mm Hobs with frame 37 ...

  • Miele KM2335 - page 38

    KM 2334 a Front b Casing depth c Gas connection R 1/2 - ISO 7-1 (DIN 10226) d Mains connection box with mains connection cable, L = 2000 mm Hobs with frame 38 ...

  • Miele KM2335 - page 39

    Installation ^ Make the worktop cut-out as shown in "Building-in dimensions". Remember to maintain the minimum safety distances (see "Safety instructions for installation"). ^ Seal the cut surfaces on wood/laminated worktops with a suitable heat-resistant sealant to avoid swelling caused by moisture. Make sure that the sealant d ...

  • Miele KM2335 - page 40

    Seal between appliance and worktop The sealing strip under the edge of the top part of the appliance provides a sufficient seal for the worktop. The appliance must not be sealed with sealant (e.g. silicone). This could result in damage to the appliance or the worktop if the appliance ever needs to be removed for servicing. Tiled worktop Grout lines ...

  • Miele KM2335 - page 41

    Building-in dimensions KM 2335 a Front b Casing depth c Gas connection R 1/2 - ISO 7-1 (DIN EN 10226) d Mains connection box with mains connection cable, L = 2000 mm e Stepped cut-out for granite or marble worktops Please take careful note of the detailed diagrams for the cut-out dimensions in granite and marble worktops. Flush fit hob 41 ...

  • Miele KM2335 - page 42

    Flush fit gas hobs are only suitable for installation in granite, marble, tiled or solid wood worktops. When using a worktop made from any other material, please check first with the worktop manufacturer that it is suitable for installing a flush fit hob. This appliance requires a 900 mm wide base unit for installation. The hob must be accessible f ...

  • Miele KM2335 - page 43

    Installation Granite and marble worktops a Worktop b Hob c Gap As the ceramic glass and the worktop cut-out have a certain dimensional tolerance, the size of gap c can vary. ^ Make the worktop cut-out as shown in "Building-in dimensions". Remember to maintain the minimum safety distances (see "Safety instructions for installation&quo ...

  • Miele KM2335 - page 44

    Solid wood and tiled worktops a Worktop b Hob c Gap d Wooden frame 7 mm (to be provided on site) As the ceramic glass and the worktop cut-out have a certain dimensional tolerance, the size of gap c can vary. ^ Make the worktop cut-out as shown in "Building-in dimensions". Remember to maintain the minimum safety distances (see "Safety ...

  • Miele KM2335 - page 45

    Building into a stainless steel worktop This appliance can be welded into a stainless steel worktop. It is essential that after being welded, it is still recognisable as a Miele appliance. , Welding must be carried out by a trained, Miele-approved person. a Stainless steel worktop b Lasered edge c Welded edge Flush fit hob 45 ...

  • Miele KM2335 - page 46

    Secure the appliance as shown, using the fixings supplied. 20 mm worktop 30 mm worktop 40 mm worktop After installation Check that all the burners are operating correctly. The flame must not go out on the lowest setting, or when the control is turned quickly from a high to a low setting. On the highest setting, the flame must have a distinctive and ...

  • Miele KM2335 - page 47

    All electrical work should be carried out by a suitably qualified and competent person, in strict accordance with current local and national safety regulations (BS 7671 in the UK). Installation, repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work. Ensure power is not supplie ...

  • Miele KM2335 - page 48

    Important The electrical safety of this appliance can only be guaranteed if correctly earthed. It is most important that this basic safety requirement is observed and regularly tested and where there is any doubt, the electrical wiring in the home should be tested by a qualified electrician. The manufacturer cannot be held liable for the consequenc ...

  • Miele KM2335 - page 49

    , Connection to the gas supply, or conversion from one type of gas to another, should only be undertaken by an approved and registered gas installer in strict accordance with local and national safety and building regulations (e.g. Gas Safe registered in the UK). Every appliance should have its own easily accessible isolating valve and test point. ...

  • Miele KM2335 - page 50

    Connection The gas connection must be installed so that connection can be made either from inside or outside the kitchen unit, and the isolating valve must be easily accessible and visible (by opening one of the kitchen doors, if necessary). After installing the appliance the gas burners have to be set for local conditions. When the gas hob has bee ...

  • Miele KM2335 - page 51

    Nominal rating KM 2312 Burner Gas type High setting Low setting kW g/h kW Small burner Natural gas H Liquid gas 1.0 1.0 - 73 0.25 0.25 Large burner Natural gas H Liquid gas 2.7 2.7 - 196 0.50 0.50 Wok Natural gas H Liquid gas 4.0 4.0 - 291 1.10 1.10 Gesamt Natural gas H Liquid gas 7.7 7.7 - 560 KM 2334 / KM 2335 Burner Gas type High setting Low set ...

  • Miele KM2335 - page 52

    , Connection to the gas supply, or conversion from one type of gas to another, should only be undertaken by an approved and registered gas installer in strict accordance with local and national safety and building regulations (e.g. Gas Safe registered in the UK). When converting to a different type of gas, the main burner jets and the small burner ...

  • Miele KM2335 - page 53

    Changing the jets Disconnect the gas hob from the mains electricity supply. Turn off the gas supply. To change the main jets Small, medium and large burners ^ Remove the pan support, burner cap a and burner head b . ^ Using an M7 socket spanner, unscrew main jet c . ^ Change the main jet. Conversion to another type of gas 53 ...

  • Miele KM2335 - page 54

    Wok burner ^ Remove burner cap ab and burner head c . ^ Using an M7 socket spanner, unscrew the main jet d ^ Fit the correct jets securely (see jet table). ^ Finally, secure the jets against inadvertent loosening with sealing wax. Conversion to another type of gas 54 ...

  • Miele KM2335 - page 55

    To change the small jets To change the small jets, the burner securing screws must first be loosened and the upper section of the appliance removed. ^ Pull the control knobs off. ^ Remove the cover (see illustration). ^ Loosen the screws. ^ Lift the top of the appliance off. ^ Using a small screwdriver, unscrew small jet a in the gas fitting. ^ Pul ...

  • Miele KM2335 - page 56

    Function test Check all gas fittings for leaks. ^ Reassemble the appliance. ^ Check the burner flame by operating the burner. The flame must not go out on the lowest setting, or when the control is turned quickly from a high to a low setting. On the highest setting, the flame must have a distinctive and visible core. ^ Stick the label supplied with ...

  • Miele KM2335 - page 57

    In the event of any faults which you cannot remedy yourself, please contact: – your Miele dealer, or – Miele (see back of manual for contact details). Please note that telephone calls may be monitored and recorded for training purposes (UK only). When contacting your Dealer or Miele, please quote the model and serial number of your appliance. T ...

  • Miele KM2335 - page 58

    58 ...

  • Miele KM2335 - page 59

    59 8QLWHG.LQJGRP -IELE#O,TD &AIRACRES-ARCHAM2OAD !BINGDON/XON/847 4EL #USTOMER#ONTACT#ENTRE4EL %MAILINFO MIELECOUK )NTERNETWWWMIELECOUK $XVWUDOLD -IELE!USTRALIA0TY ...

  • Miele KM2335 - page 60

    M.-Nr. 09 697 380 / 02 e n-G B KM 2312 / KM 2334 / KM 2335 ...

Manufacturer Miele Category Stove

Documents that we receive from a manufacturer of a Miele KM2335 can be divided into several groups. They are, among others:
- Miele technical drawings
- KM2335 manuals
- Miele product data sheets
- information booklets
- or energy labels Miele KM2335
All of them are important, but the most important information from the point of view of use of the device are in the user manual Miele KM2335.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Miele KM2335, service manual, brief instructions and user manuals Miele KM2335. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Miele KM2335.

Similar manuals

A complete manual for the device Miele KM2335, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Miele KM2335 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Miele KM2335.

A complete Miele manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Miele KM2335 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Miele KM2335, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Miele KM2335, that we can find in the current document
3. Tips how to use the basic functions of the device Miele KM2335 - which should help us in our first steps of using Miele KM2335
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Miele KM2335
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Miele KM2335 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Miele KM2335?

Use the form below

If you did not solve your problem by using a manual Miele KM2335, ask a question using the form below. If a user had a similar problem with Miele KM2335 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)