English dropdown-ico

Manual FARGO electronic HDP5000

366 pages 7.29 mb
Download

Go to site of 366

Summary
  • FARGO electronic HDP5000 - page 1

    HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) • HDP5000 single-side • HDP5000 dual-side • HDP5000 single-side (with single-side lamination) • HDP5000 dual-side (with single-side lamination) • HDP5000 single-side (with dual-side lamination) • HDP5000 dual-side (with dual-side lamination) Part Number: L000950 Fich e T ...

  • FARGO electronic HDP5000 - page 2

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) ii HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2), property of Fargo Electronics, Incorporated Copyright © 2007 by Fargo Electronics, Incorporated. All rights reserved. Printed in th e United States of America. Exclusi ...

  • FARGO electronic HDP5000 - page 3

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) iii Table of Contents Section 1: Printer Overview _________________________________________________ 1-1 How to use t he guide _________________________________________________________________ 1-1 Safety Messages (r evie w carefully )______ ...

  • FARGO electronic HDP5000 - page 4

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) iv Installation Pr ocedures ______________________________________________________________ 3-23 Installing the HDP500 0 Printer Driver ________________________________________________ 3- 23 Printing a Test Print Im age ____________________ ...

  • FARGO electronic HDP5000 - page 5

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) v Changing to the St a t ic IP Address M ode ______________________________________________ 6-20 Using the Clear C ha nges button _____________________________________________________ 6-22 Using the Medi a In formati on page ______________ ...

  • FARGO electronic HDP5000 - page 6

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) vi Adjustin g the Card Flatte ner __________________________________________________________ 7-10 Section 8: Printer Adjustments _______________________________________________ 8-1 Safety Messages (r evie w carefully )_____________________ ...

  • FARGO electronic HDP5000 - page 7

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) vii Using the E ncoding M ode dropd own list ______________________________________________ 8-74 Reviewing t he ISO Track Loc ations__________________________________________________ 8-75 Sending the Track Info rmation ____________________ ...

  • FARGO electronic HDP5000 - page 8

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) viii Cleaning o utside the Printer ________________________________________________________ 10-5 Cleaning t he Printhea d ____________________________________________________________ 10-6 Replacing t he Card Clea ning Roll er _____________ ...

  • FARGO electronic HDP5000 - page 9

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 1-1 Section 1: Printer Overview How to use the guide The HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) is designed to provide installers and technicians with quick, efficient loo kup of related procedures, components a ...

  • FARGO electronic HDP5000 - page 10

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 1-2 Safety Messages (review carefully) Symbol Critical Instructions for Safety purposes Danger: Failure to follow these installation guidelines can result in death or serious injury. Information that raises potential safety issues is indic ...

  • FARGO electronic HDP5000 - page 11

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 1-3 HDP5000 Process Flow (in table format) Reviewing the HDP5000 Boot-up Sequence Step Process 1 The Card feed stepper turns ON (to check for a card in the card path). 2 The Lam Headlift turns until the head up position is returned from th ...

  • FARGO electronic HDP5000 - page 12

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 1-4 Reviewing the HDP5000 Sequence of Operations The following sequence describes a dual-sided, full color print job with magnetic encoding. Step Process 1 The File information is received from the PC. 2 The Heater warms up and/or maintain ...

  • FARGO electronic HDP5000 - page 13

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 1-5 Reviewing HDP5000 Card Printer Seque nce of Operations (continued) Step Process 13 The Ribbon Drives, Film Drive and Print Platen Stepper turn ON and the Printhead burns the image data until the image data is depleted. All stop. ( Note ...

  • FARGO electronic HDP5000 - page 14

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 1-6 Reviewing the Lamination Module Boot-up Sequence Step Process 1 The Lam Headlift turns until the head up position is returned fr om Headlift Sensor. 2 The Lamination Ribbon Motor activates. ( Note: The RFID determine the presence of a ...

  • FARGO electronic HDP5000 - page 15

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 1-7 Reviewing the Lamination Module Sequence of Operations The LAM sequence of operations begins after printing has occurred with the Card Printer. Step Process 1 The card is fed onto the Lamination Module. 2 The card is fed to the Card Po ...

  • FARGO electronic HDP5000 - page 16

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 2-1 Section 2: S pecifications The purpose of this section is to provide the User with specific information on the Regulatory Compliances, Agency Listings, Technical Specif ications and Functional Specifications for the HDP5000 and HDP5000 ...

  • FARGO electronic HDP5000 - page 17

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 2-2 Introduction The purpose of this section is to provide the User with specific information on the Regulatory Compliances, Agency Listings, Technical Specif ications and Functional Specifications for the HDP5000 Card Printer/Encoder. Rev ...

  • FARGO electronic HDP5000 - page 18

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 2-3 Reviewing the HDP5000 Package These items are included with your HDP5000: • Unpacking Instructions • Software Installation CD (includes Printer Driver) • Cleaning Roller • One (1) power supply with Printer; one (1) power supply ...

  • FARGO electronic HDP5000 - page 19

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 2-4 Reviewing the HDP5000 Card Printer Display - HDP5000 Printer with attached Output Hopper ...

  • FARGO electronic HDP5000 - page 20

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 2-5 Regulatory Compliances Term Description CSA (cUL) The Printer manufacturer has been authorized by UL to represent the Card Printer as CSA Certified under CSA Standard C22.2 No. 60950-1-03. File Number: E145118 FCC The Card Printer comp ...

  • FARGO electronic HDP5000 - page 21

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 2-6 FCC Rules This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including in ...

  • FARGO electronic HDP5000 - page 22

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 2-7 Technical Specifications Term Description Accepted Card Thickness • Print only: .030" (30 mil) to .050" (50 mil) / .762mm to 1.27mm • Print/Lamination: .030" (30 mil) to .040" (40 mil) / .762mm to 1.02mm Accepte ...

  • FARGO electronic HDP5000 - page 23

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 2-8 Technical Specifications (continued) Term Description Card Sizes (Accepted Standard sizes) HDP5000 and HDP5000-LC (See Card tab under Printer Adjustments): • CR-80: This selection is the default form size for the HDP5000. This will p ...

  • FARGO electronic HDP5000 - page 24

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 2-9 Technical Specifications (continued) Term Description Card Size (Custom selection) Sets Custom Card Size when closing dialog box. • Print Width default = 2.440, upper limit = 2.440, lower limit = 1.000, cannot be null • Print Lengt ...

  • FARGO electronic HDP5000 - page 25

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 2-10 Technical Specifications (continued) Term Description Colors (dpi) 300 dpi (11.8 dots/mm) Dimensions • HDP5000: 11.50"H x 12.25"W x 9.25"D / 292mmH x 313mmW x 235mmD • HDP5000 + Dual-Sided Module: 11.50"H x 17. ...

  • FARGO electronic HDP5000 - page 26

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 2-11 Technical Specifications (continued) Term Description Fargo Certified Supplies Fargo Card Printer/Encoder requires highly specialized media to function properly. To maximize printed card quality and durability, Printhead life and Prin ...

  • FARGO electronic HDP5000 - page 27

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 2-12 Technical Specifications (continued) Term Description Memory 16MB RAM Operating Temperature 65º F to 90º F (18º C to 32º C). Options • Card Lamination Module – single-sided or double sided • Magnetic stripe encoding dual-sid ...

  • FARGO electronic HDP5000 - page 28

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 2-13 Technical Specifications (continued) Term Description Print Ribbon Options HDP5000 and HDP5000-LC (prints or images): • Full color, YMC*, 750 prints • Full color with resin black, YMCK*, 500 prints • Full color with two resin bl ...

  • FARGO electronic HDP5000 - page 29

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 2-14 Technical Specifications (continued) Term Description Single Wire USB 2.0 Encoding Options • ISO Magnetic Stripe Encoding, dual high- and low-coercivity, Tracks 1, 2 and 3 • Contactless Smart Card Encoder (HID iClass and MIFARE) ? ...

  • FARGO electronic HDP5000 - page 30

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 2-15 Technical Specifications Term Description System Requirements • x86 based PC or compatible • Windows 2000, Windows XP, Windows 2003 • 500MHz computer with 256MB of RAM or higher • 500MB free hard disk space or higher Warranty ...

  • FARGO electronic HDP5000 - page 31

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 2-16 Functional Specifications The Card Printer utilizes two different, yet closely related printing technologies to achieve its remarkable print quality for dye-sublimation and resin thermal transfer. See previous section as needed. The f ...

  • FARGO electronic HDP5000 - page 32

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 2-17 Printer Components: Resin Thermal Transfer to USB Interface Port Component Description Resin Thermal Transfer Resin Thermal Transfer is the print method the Printer uses to print sharp black text and crisp bar codes that can be read b ...

  • FARGO electronic HDP5000 - page 33

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 2-18 Printer Components: LCD and Softkey Control Pad The Printer provides a two line, thirty-two (32) character LCD Display that can communicate helpful information about the Printer's operation. The bottom line of the LCD Display wil ...

  • FARGO electronic HDP5000 - page 34

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 2-19 Printer Components: LCD and Softkey Control Pad (continued) Component Description Print Status Screen During operation, the LCD will indicate the current Print Status by showing you the area of the Printer that is active. It does this ...

  • FARGO electronic HDP5000 - page 35

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 2-20 Printer Components: Print Ribbons The Card Printer utilizes both dye-sublimation and/or resin thermal transfer methods to print images (print to film and transfer film to card). Since the dye-sublimation and the resin thermal transfer ...

  • FARGO electronic HDP5000 - page 36

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 2-21 Printer Components: Blank Cards Caution: Never run cards with a contaminated, dull or uneven surface through the Printer. Printing onto such cards will ultimately lead to poor print quality. Always store the card stock in its original ...

  • FARGO electronic HDP5000 - page 37

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 2-22 Printer Components: Blank Cards (continued) Type Description UltraCard stock Due to the importance of using high-quality blank cards, a factory-approved card stock called UltraCard™ is available and recommended for best results. • ...

  • FARGO electronic HDP5000 - page 38

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 2-23 Printer Components: Card Input and Output Hoppers Type Description Card Cartridge The Card Cartridge will hold a maximum of 100 cards (based on a standard 30 mil card thickness). Printer Components: Card Output Hopper and Reject Hoppe ...

  • FARGO electronic HDP5000 - page 39

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 2-24 Printer Unit: Reviewing the Card Lamination Module Danger: The Printer’s Transfer Roller can reach temperatures exceeding 350° F (175° C). Use extreme caution when operating the Laminator. Never touch the Transfer Roller unless th ...

  • FARGO electronic HDP5000 - page 40

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 2-25 Printer Components: Transfer Roller Danger: The Printer’s Transfer Roller can reach temperatures exceeding 350 degree F (175 C). Use extreme caution when operating the Transfer Roller. Never touch the Transfer Roller unless the Prin ...

  • FARGO electronic HDP5000 - page 41

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 2-26 Reviewing the Overlaminates Important! Fargo Card Printers require highly specialized overlaminates to function properly. To maximize Printer life, reliability, printed card quality and durability, you must use only Fargo Certified Su ...

  • FARGO electronic HDP5000 - page 42

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 2-27 Reviewing the CR-80 Patch Size Term Description Cross Reference CR-80 PolyGuard Overlaminate is available in a standard CR-80 patch size. ( Note: Thermal Transfer Film overlaminate will accommodate the CR-80 size.) See the Loading the ...

  • FARGO electronic HDP5000 - page 43

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 3-1 Section 3: Inst allation Procedures Safety Messages (review carefully) Symbol Critical Procedures for Safety purposes Danger: Failure to follow these installation guidelines can result in death or serious injury. Information that raise ...

  • FARGO electronic HDP5000 - page 44

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 3-2 Introduction The following guide will walk you through the installation of the Fargo HDP5000 Driver. Time Requirement This software installation process will require approximately 2 to 6 minutes (depending on the speed of your PC). Sys ...

  • FARGO electronic HDP5000 - page 45

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 3-3 Unpacking the Printer (continued) Display A – See the HDP5000 Printer Installation Guide ...

  • FARGO electronic HDP5000 - page 46

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 3-4 Unpacking the Printer Display B – See the HDP5000 Printer Installation Guide ...

  • FARGO electronic HDP5000 - page 47

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 3-5 Choosing a Good Location Follow these guidelines: • Place the unit in a location with adequate air circulation to prevent internal heat build -up. • Use the Printer's dimensions as a guideline for the minimum clearances to the ...

  • FARGO electronic HDP5000 - page 48

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 3-6 Printer Loading Procedures Loading the Print Ribbon Note: Fargo Card Printers require highly specialized supplies to function properly. • To maximize Printer life, reliability, printed card quality and durability, you must use only F ...

  • FARGO electronic HDP5000 - page 49

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 3-7 Loading the Print Ribbon (continued) Step Procedure 2 Tighten the Print Ribbon. ...

  • FARGO electronic HDP5000 - page 50

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 3-8 Loading the Print Ribbon (continued) Step Procedure 3 Insert the Print Ribbon Cartridge into the Printer until it clicks. ...

  • FARGO electronic HDP5000 - page 51

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 3-9 Loading the Clear HDP Transfer Film Step Procedure 1 Load the HDP Film into the HDP Film Cartridge until the rolls click. ...

  • FARGO electronic HDP5000 - page 52

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 3-10 Loading the Clear HDP Transfer Film (continued) Step Procedure 2 Tighten the HDP Film. ...

  • FARGO electronic HDP5000 - page 53

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 3-11 Loading the Clear HDP Transfer Film (continued) Step Procedure 3 Insert the HDP Film Cartridge into the Printer until it clicks. ...

  • FARGO electronic HDP5000 - page 54

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 3-12 Inserting the Card Cleaning Roller Step Procedure 1 Remove the Card Cleaning Roller from the Print Ribbon packaging and insert the Cleaning Roller onto the black spindle from the supply pack. ...

  • FARGO electronic HDP5000 - page 55

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 3-13 Inserting the Card Cleaning Roller (continued) Step Procedure 2 Remove the protective sleeve from the Card Cleaning Roller. ...

  • FARGO electronic HDP5000 - page 56

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 3-14 Inserting the Card Cleaning Roller (continued) Step Procedure 3 Insert the Card Cleaning Roller into the card input area. ...

  • FARGO electronic HDP5000 - page 57

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 3-15 Loading the Overlaminate ( Note: This procedure only applies to the HDP5000-LC.) The loading process for both the Thermal Transfer Overlaminate and the PolyGuard™ Overlaminate material is the same. Refer to the following steps to lo ...

  • FARGO electronic HDP5000 - page 58

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 3-16 Loading the Overlaminate (continued) Step Procedure 3 Tighten the Lamination Rolls. 4 Insert the Overlaminate Cartridges into the Lamination Module until they click. ...

  • FARGO electronic HDP5000 - page 59

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 3-17 Loading the Overlaminate (continued) Step Procedure 5 Close the Lamination Module Front Cover. ...

  • FARGO electronic HDP5000 - page 60

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 3-18 Loading the Blank Cards Step Procedure 1 Load the blank cards into the Card Cartridge, as shown below. Important: The front of the card must face DOWN. The back of the card or the magnetic stripe on the card must face UP. The Smart Ch ...

  • FARGO electronic HDP5000 - page 61

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 3-19 Loading the Blank Cards (continued) Step Procedure 2 Place the Card Input Cartridge onto the Printer until it clicks. ...

  • FARGO electronic HDP5000 - page 62

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 3-20 Connecting Power to HDP5000 Printer and Lamination Module Caution: Do not remove the red Warning sticker across the USB connection. Do not plug in the USB cable until prompted to do so during the installation of the HDP5000 Printer Dr ...

  • FARGO electronic HDP5000 - page 63

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 3-21 Connecting Power to HDP5000 Printer and Lamination Module (continued) Display B - Connecting the other end of the AC power cable to a Surge Protector. See both notes below. Note No. 1: Instead of connecting the AC power cable directly ...

  • FARGO electronic HDP5000 - page 64

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 3-22 Connecting Power to HDP5000 Printer and Lamination Module (continued) Display C - Connecting the plug from the power supply to the Printer, as shown below. Display D - Connecting the plug from the power supply to the Lamination Module ...

  • FARGO electronic HDP5000 - page 65

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 3-23 Printer Driver Installation Procedures Installation Procedures Installing the HDP5000 Printer Driver Step Procedure 1 Close down all programs and insert the Software Installation CD into your computer’s CD drive. After a few seconds ...

  • FARGO electronic HDP5000 - page 66

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 3-24 Installing the HDP5000 Prin ter Driver (continued) Step Procedure 2 Click on the Next button to continue with the installation. ...

  • FARGO electronic HDP5000 - page 67

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 3-25 Installing the HDP5000 Prin ter Driver (continued) Step Procedure 3 a. Read the License Agreement. Select the I accept the terms of the license agreement option. b. Click on the Next button to continue with the installation. ...

  • FARGO electronic HDP5000 - page 68

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 3-26 Installing the HDP5000 Prin ter Driver (continued) Step Procedure 4 a. Select Local to install a USB Printer. OR b. Select Network and enter an IP Address for the Printer. ...

  • FARGO electronic HDP5000 - page 69

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 3-27 Installing the HDP5000 Prin ter Driver (continued) Step Procedure 5 Click on the Next button to begin the installation. ...

  • FARGO electronic HDP5000 - page 70

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 3-28 Installing the HDP5000 Prin ter Driver (continued) Step Procedure 6 Wait during the installation. ...

  • FARGO electronic HDP5000 - page 71

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 3-29 Installing the HDP5000 Prin ter Driver (continued) Step Procedure 7 Applies to USB Printer installation: Connect the USB cable to both the PC and the Printer. ...

  • FARGO electronic HDP5000 - page 72

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 3-30 Installing the HDP5000 Prin ter Driver (continued) Step Procedure 8 Applies to USB Printer installation: a. Select the Printer Port. ( Note: You have the option of selecting the port only IF you click the BACK button from the previous ...

  • FARGO electronic HDP5000 - page 73

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 3-31 Installing the HDP5000 Prin ter Driver (continued) Step Procedure 9 Click the Finish button. 10 Reboot your computer. 11 You have completed this procedure. ...

  • FARGO electronic HDP5000 - page 74

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 3-32 Printing a Test Print Image Step Procedure 1 Install the YMCK or YMCKK Ribbon in the Printer for the Test Print. 2 Open the Driver settings. a. From your computer’s startup menu, select Settings > Printers and Faxes (Windows XP) ...

  • FARGO electronic HDP5000 - page 75

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 3-33 Printing a Test Print Image (continued) Step Procedure 4 This completes the HDP5000 High Definition Card Printer/Encoder Installation Guide. ...

  • FARGO electronic HDP5000 - page 76

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 4-1 Section 4: Accessory Procedures Safety Messages (review carefully) Symbol Critical Instructions for Safety purposes Danger: Failure to follow these installation guidelines can result in death or serious injury. Information that raises ...

  • FARGO electronic HDP5000 - page 77

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 4-2 Using the Security Lock Slot on the HDP5000 Important: Compatible locks are not sold by Far go Electronics; however, they are readily available from computer stores. ...

  • FARGO electronic HDP5000 - page 78

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 4-3 Using the Security Lock Slot on the HDP5000 (continued) The HDP5000 Printer has a Security Lock Slot located in the back lip of the metal chassis to accommodate a standard laptop security lock. • To prevent unauthorized removal of th ...

  • FARGO electronic HDP5000 - page 79

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 4-4 Installation and Removal Procedures Flipper and Lamination Modules Removing the Output Side Upgrade Cover Tools needed: Press the Release tab with a flat blade. Use the Snap and Clip process. Estimated Repair Time: 1 minute Step Proced ...

  • FARGO electronic HDP5000 - page 80

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 4-5 Installing the Flipper Module Accessory Parts included: Flipper Module Accessory Kit, PCB-INTF Board, Torx tool and screws Tools needed: Torx Tool (included in kit) Estimated Repair Time: 20 minutes Step Procedure 1 Caution: Power off ...

  • FARGO electronic HDP5000 - page 81

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 4-6 Flipper Module Accessory (continued) Display A - Slide the Flipper Module attachment tabs and the PCB-INTF Board into the appropriate slots at the base of Printer Module. This picture shows the Printer and the Flipper Module. ...

  • FARGO electronic HDP5000 - page 82

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 4-7 Installing the Lamination Module Accessory Parts included: Lamination Module Accessory Kit, PCB-INTF Board, Torx Tool and screws Tools needed: Torx Tool (included in kit) Estimated Repair Time: 10 minutes Step Procedure 1 Caution: Powe ...

  • FARGO electronic HDP5000 - page 83

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 4-8 Installing the Lamination M odule Accessory (continued) Display - Slide the Lamination Module attachment tabs and the PCB-INTF Board into the appropriate slots at the base of Printer or Flippe r Module. This picture shows the Printer, ...

  • FARGO electronic HDP5000 - page 84

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 5-1 Section 5: General T roubleshooting The purpose of this section is to provide the User with specific procedures relating to the LCD Messages, Communication Errors, Card Feeding Errors, Encoding Errors, Printing Process Errors, Transfer ...

  • FARGO electronic HDP5000 - page 85

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 5-2 Safety Messages (review carefully) Symbol Critical Instructions for Safety purposes Danger: Failure to follow these installation guidelines can result in death or serious injury. Information that raises potential safety issues is indic ...

  • FARGO electronic HDP5000 - page 86

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 5-3 Troubleshooting - LCD and Printer Error Message Tables This section provides two troubleshooting tables for the LCD error messages and the Printer error messages. Each table uses a 3-column presentation to present a specific LCD o r Pr ...

  • FARGO electronic HDP5000 - page 87

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 5-4 How to use the LCD Error Message Table (example provided) The PC Error Message in Column 1 (LCD Error Message) provides the Lower Left Corner Number. This number identifies the PC Error Message screenshot with its respective LCD Error ...

  • FARGO electronic HDP5000 - page 88

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 5-5 Troubleshooting with the LCD Error Message Table LCD Error Message Cause Solution Calibrate Failed (PC Error Message No. 155 and 170) Film or Ribbon calibration has failed. Verify the film is installed correctly and there is not a Ribb ...

  • FARGO electronic HDP5000 - page 89

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 5-6 Troubleshooting with the LCD E rror Message Table (continued) LCD Error Message Cause Solution Card Jam: Smart (PC Error Message No. 85) A card is jammed in the smart card encoding area of the Printer. Clear the jam. Card Jam: Trans (P ...

  • FARGO electronic HDP5000 - page 90

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 5-7 Troubleshooting with the LCD E rror Message Table (continued) LCD Error Message Cause Solution Cover is Open (PC Error Message No. 46) The Cover was left open. Ensure that the Cover is properly closed. E-Card Encoder Startup Error (PC ...

  • FARGO electronic HDP5000 - page 91

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 5-8 Troubleshooting with the LCD E rror Message Table (continued) LCD Error Message Cause Solution Empty Reject Bin (PC Error Message No. 265) The reject bin is full. Remove the large number of rejected cards from the reject bin. Click OK ...

  • FARGO electronic HDP5000 - page 92

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 5-9 Troubleshooting with the LCD E rror Message Table (continued) LCD Error Message Cause Solution Film: Wrong Material (PC Error Message No. 173) The HDP Film is not installed properly or has been damaged. Verify the correct film is insta ...

  • FARGO electronic HDP5000 - page 93

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 5-10 Troubleshooting with the LCD E rror Message Table (continued) LCD Error Message Cause Solution Head Resistance (PC Error Message No. 6) The EE setting in Driver for head resistance is out of range. Enter a value for head resistance in ...

  • FARGO electronic HDP5000 - page 94

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 5-11 Troubleshooting with the LCD E rror Message Table (continued) LCD Error Message Cause Solution Invalid Film (PC Error Message Nos. 94, 95, 96, 164, 165, and 166) An unauthorized film is installed in the Printer. Get the correct Film f ...

  • FARGO electronic HDP5000 - page 95

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 5-12 Troubleshooting with the LCD E rror Message Table (continued) LCD Error Message Cause Solution Lam Card Jam (PC Error Message No. 53, 212, 214, and 215) A jam occurred somewhere between the Printer and the Laminator. Open covers and c ...

  • FARGO electronic HDP5000 - page 96

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 5-13 Troubleshooting with the LCD E rror Message Table (continued) LCD Error Message Cause Solution Lam Handler Startup Error (PC Error Message No. 141) After powering up the Printer, the Laminator was detected, but an error occurred which ...

  • FARGO electronic HDP5000 - page 97

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 5-14 Troubleshooting with the LCD E rror Message Table (continued) LCD Error Message Cause Solution Laminate 1 Jam (PC Error Message No. 229) A Jam occurred with the Laminator material in Cartridge 1. Open Lam cover and clear the obstructi ...

  • FARGO electronic HDP5000 - page 98

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 5-15 Troubleshooting with the LCD E rror Message Table (continued) LCD Error Message Cause Solution Lm1 Headlift Err (PC Error Message No. 217) The Laminator failed to move or sense the lower (Lam module 1) head. Check head connections and ...

  • FARGO electronic HDP5000 - page 99

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 5-16 Troubleshooting with the LCD E rror Message Table (continued) LCD Error Message Cause Solution No E-card Encoder (PC Error Message No. 202) You are trying to send encoding data, but the Printer is not configured with this Encoder type ...

  • FARGO electronic HDP5000 - page 100

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 5-17 Troubleshooting with the LCD E rror Message Table (continued) LCD Error Message Cause Solution No iClass Encoder (PC Error Message No. 177) You are trying to send encoding data, but the Printer is not configured with this Encoder type ...

  • FARGO electronic HDP5000 - page 101

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 5-18 Troubleshooting with the LCD E rror Message Table (continued) LCD Error Message Cause Solution No Smart Encoder (PC Error Message No. 33) You are trying to send encoding data, but the Printer is not configured with this Encoder type. ...

  • FARGO electronic HDP5000 - page 102

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 5-19 Troubleshooting with the LCD E rror Message Table (continued) LCD Error Message Cause Solution Remove Lam Mtl (PC Error Message No. 210) Single Sided Lam job specified but the material is loaded in both Modules. Remove either Laminati ...

  • FARGO electronic HDP5000 - page 103

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 5-20 Troubleshooting with the LCD E rror Message Table (continued) LCD Error Message Cause Solution Ribbon Miscue (PC Error Message No. 97) The Ribbon is not able to find the next panel correctly. Check for jams/breaks. If jammed, clear th ...

  • FARGO electronic HDP5000 - page 104

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 5-21 Troubleshooting with the LCD E rror Message Table (continued) LCD Error Message Cause Solution Unable to Feed (PC Error Message Nos. 14 and 81) The Printer is unable to feed a card from the Card Cartridge Verify there are cards in the ...

  • FARGO electronic HDP5000 - page 105

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 5-22 Troubleshooting with the Prin ter Error Message Table Printer Error Message Cause Solution General Error A general Printer error has occurred. Press Cancel on the printer or click on Cancel Print . Card Not Found The Printer is unable ...

  • FARGO electronic HDP5000 - page 106

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 5-23 Troubleshooting with the Printer E rror Message Table (continued) Printer Error Message Cause Solution Card Jam A Card has become jammed in the Printer. a. Open the Printer's Front Cover and remove the Print Ribbon and Film Cartr ...

  • FARGO electronic HDP5000 - page 107

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 5-24 Troubleshooting with the Printer E rror Message Table (continued) Printer Error Message Cause Solution Card Jam (Flipper) A Card has become jammed in the Printer's Flipper Table. a. Open the Printer’s Front Cover and the Flippe ...

  • FARGO electronic HDP5000 - page 108

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 5-25 Troubleshooting with the Printer E rror Message Table (continued) Printer Error Message Cause Solution Card Eject Error The Printer is unable to eject a card. Please check Printer for a card jam or other obstruction and press the Resu ...

  • FARGO electronic HDP5000 - page 109

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 5-26 Troubleshooting with the Printer E rror Message Table (continued) Printer Error Message Cause Solution No Flipper The Printer does not ha ve flipping capabilities. a. Verify the Printer has flipper capabilities via the LCD Menu. b. If ...

  • FARGO electronic HDP5000 - page 110

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 5-27 Troubleshooting with the Printer E rror Message Table (continued) Printer Error Message Cause Solution No Ribbon Installed No Print Ribbon is installed in the Printer. Install the correct Ribbon and press Resume on the LCD display. Ri ...

  • FARGO electronic HDP5000 - page 111

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 5-28 Troubleshooting with the Printer E rror Message Table (continued) Printer Error Message Cause Solution Ribbon Break/Jam A Ribbon break/jam has been detected inside the Printer. The printer has determined that the installed ribbon has ...

  • FARGO electronic HDP5000 - page 112

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 5-29 Troubleshooting with the Printer E rror Message Table (continued) Printer Error Message Cause Solution Invalid Ribbon An incorrect Print Ribbon has been installed in the Printer. (This is if you are using a SecureMark Ribbon). A non-S ...

  • FARGO electronic HDP5000 - page 113

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 5-30 Troubleshooting with the Printer E rror Message Table (continued) Printer Error Message Cause Solution Invalid Ribbon The ribbon installed doe s not match the SecureMark configuration of the printer. Install a Certified Print Ribbon a ...

  • FARGO electronic HDP5000 - page 114

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 5-31 Troubleshooting with the Printer E rror Message Table (continued) Printer Error Message Cause Solution No Magnetic Encoder Installed A print job with Magnetic encoding was sent with no Magnetic encoder installed in the printer. Ensure ...

  • FARGO electronic HDP5000 - page 115

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 5-32 Troubleshooting with the Printer E rror Message Table (continued) Printer Error Message Cause Solution Laminator (General Error) The Laminator has reported a general fault. Press the Resume button located on the Printer to continue. T ...

  • FARGO electronic HDP5000 - page 116

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 5-33 Troubleshooting with the Printer E rror Message Table (continued) Printer Error Message Cause Solution No Laminator Film Installed No laminator Film is installed in the laminator unit. Ensure that the appropriate Laminator Film is ins ...

  • FARGO electronic HDP5000 - page 117

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 5-34 Troubleshooting with the Printer E rror Message Table (continued) Printer Error Message Cause Solution Laminator Film Break/Jam A Film break/jam has been detected inside the Laminator. The printer has determined that one or both overl ...

  • FARGO electronic HDP5000 - page 118

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 5-35 Troubleshooting with the Printer E rror Message Table (continued) Printer Error Message Cause Solution Print Film Out The Print Film installed in the printer is empty. Install new Film and press the Resume button to continue printing. ...

  • FARGO electronic HDP5000 - page 119

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 5-36 Troubleshooting with the Pr inter Error Message Table Printer Error Message Cause Solution Invalid Print Film Installed The Print Film installed does not match the SecureMark configuration of the printer. A non-SecureMark Film is inst ...

  • FARGO electronic HDP5000 - page 120

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 5-37 Communications Errors Resolving the Communication Errors Symptom(s): Incorrect output, communications error on PC or Printer, stalling, no re sponse from Printer, no job printed, “paper out” error. Step Procedure 1 Confirm that th ...

  • FARGO electronic HDP5000 - page 121

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 5-38 Resolving the Communicati on Errors (continued) Step Procedure 4 Determine t he problem with printing from the application. a. Print a self-test from the Printer by pressing Options -> Menu-> Select - > Print on the printer? ...

  • FARGO electronic HDP5000 - page 122

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 5-39 Printing a Test Image Step Procedure 1 Open the Diagnostic Tool from the Driver. Choose Run Tests to select a preset test image. Select Self Tests ( Note: These images help to determine if the Printer is functioning properly.) 2 Scrol ...

  • FARGO electronic HDP5000 - page 123

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 5-40 Reviewing the Alignment Self Test Card Step Procedure 1 Use this card to determine Image Placement and confirm that the Printer is working properly. ( Note: The image consists of sixteen (16) gray scale boxes and alignment arrows. The ...

  • FARGO electronic HDP5000 - page 124

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 5-41 Reviewing the Color Bars Self Test Step Procedure 1 Use this card to confirm that image colors are properly reproduced. Image consists of sixteen graduated steps of RGB and YMCK. ( Note: This print will provide maximum image size, giv ...

  • FARGO electronic HDP5000 - page 125

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 5-42 Reviewing the Device Settings Self Test Step Procedure 1 Use this card to view the Printer settings and counts for Card Count (CC), Card Cleaning Count (TC) and others. The Card Count is the total number of cards the Printer has produ ...

  • FARGO electronic HDP5000 - page 126

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 5-43 Reviewing the YMCK Self Test Step Procedure 1 Use this card to confirm that image colors are properly reproduced. Image consists of sixteen graduated steps of RGB and YMCK. ( Note: This print will provide maximum image size, giving co ...

  • FARGO electronic HDP5000 - page 127

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 5-44 Reviewing the Magnetic Self Test Step Procedure 1 This option only applies if a Magnetic Encoding Module is in stalled in the Printer. ( Note: The Printer will feed, encode and eject a card. Be sure to have high coercivity cards insta ...

  • FARGO electronic HDP5000 - page 128

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 5-45 Reviewing the Resin Self Test Step Procedure 1 Use this card to determine that the Resin Panel is printing pr operly. ...

  • FARGO electronic HDP5000 - page 129

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-1 Section 6: Ethernet Option Section Introduction The Ethernet option includes the Ethernet port and the internal Printer Server. • Printer Management: The Printer Driver provides bi-directional status information so you can monitor an ...

  • FARGO electronic HDP5000 - page 130

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-2 Technical Specification - Ethernet Option Here are the system requirements for Ethernet. Caution: For safety purposes, Ethernet is not intended for a direct con nection outside of the building. Function Requirement Network An IEEE 802. ...

  • FARGO electronic HDP5000 - page 131

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-3 Functional Specification - Ethernet Option The Fargo Ethernet option includes these features. Feature Description Simultaneous Printing Provides the ability to simultaneously print from multiple PCs to the network Printer. Printer Feed ...

  • FARGO electronic HDP5000 - page 132

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-4 Network Services - Overview The Ethernet option provides the services described in this section. ( Note: Other additional services include a Ping client, address assi gnment and Printer discovery functions.) Reviewing the Print Server ...

  • FARGO electronic HDP5000 - page 133

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-5 Network Management Interface The SNMP interface is described below. Interface Description SNMP • The Ethernet interface is a fully-manageable SNMP agent that supports MIB-II. • The Ethernet interface is MIB II compliant, allowing S ...

  • FARGO electronic HDP5000 - page 134

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-6 Reviewing the Telnet Command Table The following table describes available Telnet commands. ( Note: You can enter partial full- word commands: the Printer will respond with additional help. For example, you can enter “list”, and th ...

  • FARGO electronic HDP5000 - page 135

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-7 Reviewing the Telnet Command Table (continued) Telnet Command Command Purpose Command Format all Display all information about this Printer. list all diff Display all differences b etween current and stored network settings. list diff ...

  • FARGO electronic HDP5000 - page 136

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-8 Reviewing the Telnet Command Table (continued) Telnet Command Command Purpose Command Format lpq Display information about print jobs and their settings. list lpq Printer Display information about the Printer (i.e., model number, Firmw ...

  • FARGO electronic HDP5000 - page 137

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-9 Reviewing the Telnet Command Table (continued) Telnet Command Command Purpose Command Format contact Set the contact string. set sysinfo label [<STRING>] location Set the location string. set sysinfo location [<STRING>] lab ...

  • FARGO electronic HDP5000 - page 138

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-10 Reviewing the Telnet Command Table (continued) Telnet Command Command Purpose Command Format add Add a new User definition. The HDP5000 allows only two (2) User definitions. set user add <NAME> del Delete a User definition. set ...

  • FARGO electronic HDP5000 - page 139

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-11 Reviewing the Telnet Command Table (continued) Telnet Command Command Purpose Command Format addr Store a new IP address. store net addr <ADDRESS> mask Store a new address mask. store net mask <MASK> gateway Store a new de ...

  • FARGO electronic HDP5000 - page 140

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-12 Reviewing the Telnet Command Table (continued) Telnet Command Command Purpose Command Format save Save all current settings as the stored settings in the permanent memory. save load Take the settings from the stored memory and make th ...

  • FARGO electronic HDP5000 - page 141

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-13 Logging In When a User attempts to change any setting, they are asked for a User name and password. ( Note: The Guest Users can only view settings.) Step Procedure 1 Enter the correct User name: • The default administrative User nam ...

  • FARGO electronic HDP5000 - page 142

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-14 Accessing the Home page Step Procedure 1 Open a window for your network browser application on your local PC. 2 Find the IP address of the Printer. ( Note: See Accessing the HDP5000 IP Address as needed to get this from the LCD of the ...

  • FARGO electronic HDP5000 - page 143

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-15 Reviewing the Home Page This section provides a display of the HDP5000 Home Page. ...

  • FARGO electronic HDP5000 - page 144

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-16 Reviewing the Home Page Categories and Fields (table) You can view these categories and fields in the following table. Category Field Purpose Serial Number Displays the unique fixed serial number of the Printer. Fixed for Printer Hard ...

  • FARGO electronic HDP5000 - page 145

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-17 Configuring the Network Settings The procedures needed to configure the network settings are presented in this se ction. Accessing the Network Settings page The Network page displays the current network settings and allows the User to ...

  • FARGO electronic HDP5000 - page 146

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-18 Reviewing the Interface The Interface display indicates the network speed supported by the Printer. Reviewing the Current Settings The Current Settings page section displays the current active network settings for the Printer. • The ...

  • FARGO electronic HDP5000 - page 147

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-19 Switching to the Automatic IP Address Mode Step Procedure 1 Select the Network link from any web page of the Printer. 2 Select the Obtain an IP address automatically radio button to enable the DHCP/BOOTP, which automatically assigns t ...

  • FARGO electronic HDP5000 - page 148

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-20 Changing to the Static IP Address Mode Step Procedure 1 Select the Network link from any web page of the Printer. 2 Select the Use the following IP address radio button, which prepares the Printer to use network settings (that the Use ...

  • FARGO electronic HDP5000 - page 149

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-21 Changing to the static IP address mode (continued) Step Procedure 7 Login as a root User if you are so prompted. ( Note: Any change of setting will only be accepted after you have successfully logged in.) 8 Reboot the Printer to effec ...

  • FARGO electronic HDP5000 - page 150

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-22 Using the Clear Changes button Step Procedure 1 Click on the Clear Changes button to delete the information in the textboxes in Stored Settings area. See the lower left corner of this display. ...

  • FARGO electronic HDP5000 - page 151

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-23 Using the Media Information page This page displays Media information about the Ribbon and Film (currently installed in the Printer). Step Procedure 1 Select the Status link from any web page of the Printer. 2 Select the Media page li ...

  • FARGO electronic HDP5000 - page 152

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-24 Using the TCP/IP page The TCP/IP page displays the TCP/IP Status of each Printer connection, which are not configurable. See the next two pages for displays. Step Procedure 1 Select the Status link from any web page of the Printer. 2 ...

  • FARGO electronic HDP5000 - page 153

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-25 Using the TCP/IP page See the Using the TCP/IP page procedure. ...

  • FARGO electronic HDP5000 - page 154

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-26 Using the Printer page You can use the Printer page to review current information about the Printer device settings and print jobs. Device settings include the following: • The status which displays information about the current pri ...

  • FARGO electronic HDP5000 - page 155

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-27 Reviewing the Printer page (continued) See the previous page for descriptions of the fields. ...

  • FARGO electronic HDP5000 - page 156

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-28 Using the System Log page The System Log page displays the current system log settings and allows the User to change the settings. ( Note: These settings configure how system logging occurs. There are two logs.) ...

  • FARGO electronic HDP5000 - page 157

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-29 Changing the Log Name By default the names are log1 and log2. However, you can rename them from this page. ( Note: This also updates the link to the correspo nding web page.) Step Procedure 1 Select the System Log link. 2 Select the l ...

  • FARGO electronic HDP5000 - page 158

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-30 Selecting the Log Type Step Procedure 1 Select the System Log link. See the next page. 2 Select the link for the log name you want to view or configure (the default choices are log1 or log2 ). 3 Select the Print Job Started checkbox t ...

  • FARGO electronic HDP5000 - page 159

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-31 Selecting the Log Destination Specify one destination for the log. Step Procedure – No event logging. 1 Select the System Log link. 2 Select the link for the log name you want to view or configure (the default choices are log1 or lo ...

  • FARGO electronic HDP5000 - page 160

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-32 Setting up Email Event logging Follow this procedure to enable logging using email notification: Step Procedure – Specify email logging. 1 Select the System Log link. 2 Select the link for the log name you want to view or configure ...

  • FARGO electronic HDP5000 - page 161

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-33 Specifying UDP Event logging Follow this procedure to enable logging to a UDP Syslog program. Step Procedure 1 Select the System Log link. • The messages will be sent via UDP packets to the Syslog port (514) of the specified host. ? ...

  • FARGO electronic HDP5000 - page 162

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-34 Specifying UDP Event logging Step Procedure 5 Select Submit . 6 Login as a root User if you are so prompted. ( Note: Any change of setting will only be accepted after you have successfully logged in.) ...

  • FARGO electronic HDP5000 - page 163

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-35 Specifying TCP Event logging Follow this procedure to send logging messages to a pre-existing IP connection made on the TCP port. Step Procedure 1 Select the System Log link. 2 Select the link for the log name you want to view or conf ...

  • FARGO electronic HDP5000 - page 164

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-36 Specifying TCP Event logging (continued) Step Procedure 6 Use a host program such as Telnet to receive these TCP logging messages ( Note: Other programs such as HyperTerminal are also used to monitor TCP connections). See below. • T ...

  • FARGO electronic HDP5000 - page 165

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-37 Using the Administration pages The purpose of the Administration pages is to allow the User to upgrade, reboot, modify passwords and enter User-specified system information strings. Using the System Information page The System Informa ...

  • FARGO electronic HDP5000 - page 166

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-38 Using the System Information page (continued) Step Procedure 3 To change an attribute, type the new entry in one of these boxes: • Label textbox • Location textbox • Contact textbox 4 Select the Submit button. 5 Login as a root ...

  • FARGO electronic HDP5000 - page 167

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-39 Changing the Root Password The Passwords page allows the User to change the passwords needed to login as a User. Changes to all settings require a login. ( Note: However, these changes are only protected by password after the password ...

  • FARGO electronic HDP5000 - page 168

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-40 Using the Reboot pages Rebooting the HDP5000 restarts the complete Printer, which includes the Print Server. Rebooting the Printer The Reboot page allows the HDP5000 User to reboot or reset the Printer and/or enter the upgrade mode. S ...

  • FARGO electronic HDP5000 - page 169

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-41 Upgrading the Main Firmware The Upgrade page allows the User to upload new Firmware to the Printer. For the HDP5000 Printer/encoder, this Upgrade page provides for upgrading the main Printer Firmware which includes the Print Server Fi ...

  • FARGO electronic HDP5000 - page 170

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-42 Upgrading the Main Firmware (HDP5000 onl y ) (continued) Step Procedure 4 Select the Upgrade button to get Printer into the upgrade mode. 5 Select the Yes button and wait for reboot, as shown below in Displays A and B. Display A – R ...

  • FARGO electronic HDP5000 - page 171

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-43 Upgrading the Main Firmware (HDP5000 onl y ) (continued) Step Procedure 6 Select Administration when the Home page appears. See Display A below. 7 Select Upgrade to get to the upgrade page. See Display B below. Display A – Selecting ...

  • FARGO electronic HDP5000 - page 172

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-44 Upgrading the Main Firmware (HDP5000 only) (continued) Step Procedure 8 Select the Browse button. See Display A below. 9 Navigate to and select the appropriate file to upload. 10 Select the Upgrade button to start the Firmware upload. ...

  • FARGO electronic HDP5000 - page 173

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-45 Using the Print Path page The purpose of the Print Path page is to allow the User to view or change the TCP port numbers used to communicate to the printer. • If these settings are left to the default entry of 0 then the defau lt po ...

  • FARGO electronic HDP5000 - page 174

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-46 Using the Print Path page (continued) Step Procedure 4 Select the Submit button to save these changes to stored settings in the memory of the Printer. ( Note: These settings will not be lost if the power is removed from the Printer.) ...

  • FARGO electronic HDP5000 - page 175

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-47 Using the Help page The Help page displays the Help information. Step Procedure 1 Open this web page at the appropriate location by clicking on the Help book icon at the top of each page. See previous page. 2 Review the web interface ...

  • FARGO electronic HDP5000 - page 176

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-48 Upgrading the Main Firmware with the Fargo Workbench Printer Utility The Main Printer Firmware upgrades are done with the same procedure as the USB- connected Printer. • The PC doing the upgrade must have a Driver installed for the ...

  • FARGO electronic HDP5000 - page 177

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-49 Upgrading the Main Firmware with the Fargo Workbench Printer Utility (continued) Step Procedure 3 Access the Upgrade Firmware window from the Actions Menu, as shown below. 4 Select the New Firmware File by clicking Browse and selectin ...

  • FARGO electronic HDP5000 - page 178

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-50 Restoring the Factory Settings for Ethernet There may be times when you are unable to use the current configuration of the Ethernet interface. ( Note: This could be because you have lost t he password for your Printer or you just cann ...

  • FARGO electronic HDP5000 - page 179

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-51 Changing the DHCP Setting Step Procedure 1 See the Accessing the Network Setup Menu procedure to access the Network Settings menu : Options -> MENU -> Next -> Network Settings 2 Select Next on the LCD to view the DHCP menu en ...

  • FARGO electronic HDP5000 - page 180

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-52 Saving addresses Step Procedure. 1 See the Accessing the Network Setup Menu procedure to access the Network Settings menu: Options -> MENU -> Next -> Network Settings 2 Select Next on the LCD to view the Save Addresses menu e ...

  • FARGO electronic HDP5000 - page 181

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-53 Accessing the HDP5000 IP Address Follow this procedure: Step Process 1 Press Info in Display A (below) to continue with the procedure. 2 Press Next several times to access Display C (IP:). 3 Press Next one more time, and the IP: addre ...

  • FARGO electronic HDP5000 - page 182

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-54 Ethernet Printer Troubleshooting Pr ocedures Troubleshooting procedures If you are having trouble connecting to your Ethernet Printer or printing to it, you should go through each of the following procedures. Step Procedure 1 Follow t ...

  • FARGO electronic HDP5000 - page 183

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-55 Verifying the Printer Connection Step Procedure 1 Ensure that your Printer has a valid network connection. 2 Verify that the HDP5000 has the green LED on solidly and the amber LED is flashing with network activity. 3 If the LEDs do no ...

  • FARGO electronic HDP5000 - page 184

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-56 Verifying that y our PC can access the Printer using the ping command Step Procedure 1 Follow these instructions to issue a ping command to the Printer: At a DOS prompt, enter ping [IP Address] Example: C:>ping 210.1.10.240 • If ...

  • FARGO electronic HDP5000 - page 185

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-57 Verifying that your PC can access the Printer using the ping command (continued) Step Procedure 2 Verify that the PC and the Printer are connected to the same network. 3 You may be on different subnets of your network and some of the ...

  • FARGO electronic HDP5000 - page 186

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-58 Reviewing Frequently-asked Questions Question Answer How do I know if my Printer has the Ethernet option installed? All HDP5000 models come with Ethernet installed as standard equipment. What PC operating systems work with my Ethernet ...

  • FARGO electronic HDP5000 - page 187

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-59 Reviewing Frequently-asked Questions (continued) Question Answer How can I find the IP address of my Ethernet Printer? You can find it in the LCD of the Printer if the Ethernet option is functioning properly. Select Info , then select ...

  • FARGO electronic HDP5000 - page 188

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-60 Reviewing Frequently-asked Questions (continued) Question Answer How do I upgrade the Printer Firmware in my Ethernet-enabled Printer? This is done in the same manner as a USB-connected Printer. The PC doing the upgrade must have a Dr ...

  • FARGO electronic HDP5000 - page 189

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-61 Reviewing Frequently-asked Questions (continued) Question Answer What if I lose the password for my Printer or it is not accepted? The HDP5000 has a menu selection that allows the User names and passwords to revert to default: Options ...

  • FARGO electronic HDP5000 - page 190

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-62 Reviewing Frequently-asked Questions (continued) Question Answer How do I reconfigure my PC Printer Driver to connect to a different Printer or different IP address? Use the Windows “Add Printer Wizard” to create a printer instanc ...

  • FARGO electronic HDP5000 - page 191

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-63 Reviewing Frequently-asked Questions (continued) Question Answer How do I configure my Printer’s IP settings? • By default, the Printer is configured for dynamic IP address assignment. That is, it will try to get its IP address an ...

  • FARGO electronic HDP5000 - page 192

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-64 Reviewing Frequently-asked Questions Question Answer What do the LEDs by the Ethernet connection on the back of the Printer indicate? • On the HDP5000 Printer: The green LED indicates a valid Ethernet connection. The amber LED indic ...

  • FARGO electronic HDP5000 - page 193

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-65 Glossary of Terms Term Purpose MAC (Media Access Control) The unique numeric value address associated with a network device that gives the device a unique identity. This address is assigned by the device manufacturer to ensure its uni ...

  • FARGO electronic HDP5000 - page 194

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 6-66 Glossary of Terms (continued) Term Purpose SNMP (Simple Network Management Protocol) This is protocol for the network management services. This protocol provides a means for network compliant devices, called agents, to store data abou ...

  • FARGO electronic HDP5000 - page 195

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 7-1 Section 7: Card Lamination Module The HDP5000 supports the attachment of an optional Card Lamination Module. This Module can be ordered pre-installed on the Printer from the factory or can be ordered separa tely as a field upgradeable ...

  • FARGO electronic HDP5000 - page 196

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 7-2 Safety Messages (review carefully) Symbol Critical Instructions for Safety purposes Danger: Failure to follow these installation guidelines can result in death or serious injury. Information that raises potential safety issues is indic ...

  • FARGO electronic HDP5000 - page 197

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 7-3 Reviewing the Card Lamination Module ...

  • FARGO electronic HDP5000 - page 198

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 7-4 Installing the Card Lamination Module Introduction The following guide provides a step-by-step installation procedure for the HDP5000 Lamination Module and Printer Driver Accessory . Refer to the HDP5000 High Definition Card Printer/En ...

  • FARGO electronic HDP5000 - page 199

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 7-5 Inspecting the Card Lamination Module While unpacking your Lamination Module, inspect the carton to ensure that no damage has occurred during shipping. ( Note: Make sure that all supplied accessories are included with your unit.) Your ...

  • FARGO electronic HDP5000 - page 200

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 7-6 Installing the Lamination Module Accessory Parts included: Lamination Module Accessory Kit, PCB-INTF Board, Torx Tool and screws. Tools needed: Torx Tool included in kit. Estimated Repair Time: 10 minutes. Step Procedure 1 Caution: Pow ...

  • FARGO electronic HDP5000 - page 201

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 7-7 Installing the Lamination M odule Accessory (continued) Display A - Shows the Printer, the Flipper Module and the Lamination Module. Slide the Lamination Module attachment tabs and the PCB-INTF Board into the appropriate slots at the b ...

  • FARGO electronic HDP5000 - page 202

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 7-8 Adjusting the Lamination Placement on the Card The Card Lamination Module provides an adjustable Lamination Placement knob that allows you to fine-tune where the lamination is being placed on the card. Step Procedure 1 See Display A (b ...

  • FARGO electronic HDP5000 - page 203

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 7-9 Adjusting the Lamination Placement on the Card Display B – See Procedural Step 2 (on the previous page) ...

  • FARGO electronic HDP5000 - page 204

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 7-10 Adjusting the Card Flattener The Card Lamination Module provides an adjustable Card Flattener that allows you to fine- tune the flatness of laminated cards. This flattener works by reverse bending cards as they travel through the Lami ...

  • FARGO electronic HDP5000 - page 205

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-1 Section 8: Printer Adjustment s The purpose of this section is to provide the User with specific information on Printer adjustment procedures. Safety Messages (review carefully) Symbol Critical Instructions for Safety purposes Danger: ...

  • FARGO electronic HDP5000 - page 206

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-2 Important! Fargo Card Printers require highly specialized Print Ribbons to function properly. To maximize Printer life, reliability, printed card quality and durability, you must use only Fargo Certified Supplies. For this reason, your ...

  • FARGO electronic HDP5000 - page 207

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-3 Selecting the Appropriate HDP Printer Driver settings You have these card selections (to choose from): • Fargo UltraCard III (Default Card Type) • Fargo Ultracard • HID ISO Prox – Standard (13xx) • HID ISO Prox – Composite ...

  • FARGO electronic HDP5000 - page 208

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-4 Selecting the Appropriate HDP Printer Driver settings For the cases where custom settings are required, the Printer Driver's Card Type option also includes Custom 1 and Custom 2 options. • Settings: These settings allow designat ...

  • FARGO electronic HDP5000 - page 209

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-5 Conducting the Tape Adhesion Test It is important to conduct tape adhesion tests because Fargo cannot be certain which transfer temperature and Dwell Time will work best (when printing cards other than UltraCard III). ( Note: The optim ...

  • FARGO electronic HDP5000 - page 210

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-6 Conducting the Tape adhesion Test (continued) See the previous page. ...

  • FARGO electronic HDP5000 - page 211

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-7 Conducting the Tape adhesion Test (continued) Step Procedure 4 Visually examine the card and the strip of tape pulled from the card, to see if any portion of the HDP Film was removed from the card. • If any residue (e.g., oil or grea ...

  • FARGO electronic HDP5000 - page 212

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-8 Printer Driver Options Installing Printer Driver Updates Occasionally, new Printer Driver versions ar e released which have new or updated features. • Before installing an updated Printer Driver version, always delete the existing Pr ...

  • FARGO electronic HDP5000 - page 213

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-9 Installing Printer Driver Updates Step Procedure 5 Follow the on-screen instructions to begin installation. See Printer Driver Installation . ( Note: When prompted, click on the Have Disk button; the Install From Disk window will appea ...

  • FARGO electronic HDP5000 - page 214

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-10 Setting Up the Printer Driver Once the appropriate Printer Driver for the computer has been installed, you will need to set the Driver up with the proper print options. To open the Printer Driver setup window, please refer to the foll ...

  • FARGO electronic HDP5000 - page 215

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-11 Using the Card tab Use this option to control specific Printer functions. ...

  • FARGO electronic HDP5000 - page 216

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-12 Selecting the Card Size Step Procedure 1 Select the appropriate card option: • CR-80: This selection is the default form size fo r the HDP5000. This will print a 2.125 X 3.374 image including a .04 over-bleed on each of the 4 sides ...

  • FARGO electronic HDP5000 - page 217

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-13 Selecting the Card Type Select the appropriate card type according to the composition of the card stock. Step Procedure 1 You have these selections (to choose from): • Fargo UltraCard III (Default Card Type) • Fargo Ultracard • ...

  • FARGO electronic HDP5000 - page 218

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-14 Selecting the Card Type See the previous page. ...

  • FARGO electronic HDP5000 - page 219

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-15 Selecting the Card Type (continued) Step Procedure 2 If using a card stock other than listed, use the Custom 1 options to save custom Dwell Time and dwell temperature controls on the Image Transfer tab. a. Click on the Custom options ...

  • FARGO electronic HDP5000 - page 220

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-16 Selecting the Card Type (continued) Please see Step 2b on the previous page. ...

  • FARGO electronic HDP5000 - page 221

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-17 Setting the Orientation Select either the Portrait or Landscape radio buttons for Orientation. Step Procedure 1 Select Portrait to cause the card to print in a vertical orientation. OR Select Landscape to cause the card to print in a ...

  • FARGO electronic HDP5000 - page 222

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-18 Specifying the number of Copies Specifies the number of copies to be printed. • The upper limit is 10000 and the lower limit is 1. ...

  • FARGO electronic HDP5000 - page 223

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-19 Selecting the Diagnostics button This will launch the Diagnostic too l (if installed). ...

  • FARGO electronic HDP5000 - page 224

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-20 Selecting the Test Print button When selected, a test PRN file will be sent to the Printer. See below. This file will print a Full Color plus Resin print on the front side of the card and a Resin or black only image on the backside. T ...

  • FARGO electronic HDP5000 - page 225

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-21 Selecting the About button Select the About button to open a dialog box containing the copyright information as well as the Driver’s version number and date code. ...

  • FARGO electronic HDP5000 - page 226

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-22 Selecting the Toolbox button Select the Toolbox button. See the Toolbox section for more information and procedures. ...

  • FARGO electronic HDP5000 - page 227

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-23 Using the Device Options tab This section describes the use of the Device Options tab. ...

  • FARGO electronic HDP5000 - page 228

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-24 Detecting Supplies at Print Time Function Step Procedure 1 Use the Supplies checkbox for auto detection of the consumables, which are the Ribbon, Film and Laminate. See below. • In the Firmware, the values (representing the installe ...

  • FARGO electronic HDP5000 - page 229

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-25 Detecting Supplies at Prin t Time Function (continued) Step Procedure 3 When the Supplies checkbox is checked, the following takes place: • Ribbon and Film Type dropdown boxes are inactive and populated with values of installed supp ...

  • FARGO electronic HDP5000 - page 230

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-26 Detecting Supplies at Prin t Time Function (continued) Step Procedure 4 When the Supplies checkbox is not checked or it is de-select ed (cleared) from a selected state, the Ribbon and Film dropdown boxes become active and auto selecte ...

  • FARGO electronic HDP5000 - page 231

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-27 Adjusting the Ribbon Type Use the Ribbon Type dropdown menu to match Ribbon type. Step Procedure 1 Adjust to match the Ribbon Type selection with the Ribbon type that is loaded in the Printer. • YMC (Full Color): Yellow, Magenta, Cy ...

  • FARGO electronic HDP5000 - page 232

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-28 Adjusting the Film Type Step Procedure 1 Allows you to select the film type option that is appropriate for the type of HDP film currently loaded in the Printer. • Select the Clear option to automatically adjust the appropriate trans ...

  • FARGO electronic HDP5000 - page 233

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-29 Using the Dual Sided Group Functions The Dual Sided group checkboxes (shown below ) are grayed out if no Flipper is automatically found or if the Dual Sided is m anually turned off. See the procedures in this section for more instruct ...

  • FARGO electronic HDP5000 - page 234

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-30 Using the Dual Sided - Print Both Sides option Use this option to automatically print on both the front and backside of a card. Step Procedure 1 Select this option in conjunction with any application program that support s a multiple- ...

  • FARGO electronic HDP5000 - page 235

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-31 Using the Print Both Sides - Split 1 Set of Ribbon Panels option Use this option to provide the most economical means of printing a dual-sided card since a single set of Ribbon Panels will be split to print both the front and backside ...

  • FARGO electronic HDP5000 - page 236

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-32 Using the Print Both Sides - Pr int Back Image on Front of Card option This option becomes active when Print Both Sides is checked. The Default is active and unchecked. Step Procedure 1 Select this option: • If you need to print the ...

  • FARGO electronic HDP5000 - page 237

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-33 Using the Dual Sided - Print Back Side Only option Use this option to print only onto the backside of cards. ( Note: The Print Back Side Only checkbox default is active and unchecked.) Step Procedure 1 Select this option to print only ...

  • FARGO electronic HDP5000 - page 238

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-34 Using the Options Group The functions under the Options Group are described in this section. ...

  • FARGO electronic HDP5000 - page 239

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-35 Using the Rotate Front 180 Degrees or Rotate Back 180 Degrees options Use this option to change the position of the printed image in relation to the set locat ion of a card's Magnetic Stripe or smart chip. Step Procedure 1 Select ...

  • FARGO electronic HDP5000 - page 240

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-36 Using the Disable Printing option Use this option to disable the printing capabilitie s of the Printer while still allowing the Printer to encode cards. ( Note: This option is useful to encode or r e-encode preprinted cards without wa ...

  • FARGO electronic HDP5000 - page 241

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-37 Using the Image Color tab Use this tab to adjust color properties. ( Note: The HDP5000 Printing Preferences window has the same Image Color tab functionality as the HDP5000-LC Printing Preferences window.) Step Procedure 1 Select the ...

  • FARGO electronic HDP5000 - page 242

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-38 Using the Image Color tab (HDP5000) Display B – Image Color tab > Advanced Image Color window ...

  • FARGO electronic HDP5000 - page 243

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-39 Using the Quality – Color Matching dropdown Step Procedure 1 Select None (a) if interested in print speed rather than print color, (b) if color correcting the image for printing has already been done or (c) if using third party colo ...

  • FARGO electronic HDP5000 - page 244

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-40 Using the Quality – Color Ma tching dropdown (continued) Step Procedure 2 Control the overall darkness and lightness of the dye-sub printed image by adjusting the Dye-Sub Intensity slide by clicking and dragging the slide's box ...

  • FARGO electronic HDP5000 - page 245

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-41 Using the Quality – Color Ma tching dropdown (continued) Step Procedure 3 Control the amount of heat the Printer uses when printing with the resin black Panel by adjusting the Resin Heat slide. • Move the slide to the left to caus ...

  • FARGO electronic HDP5000 - page 246

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-42 Using the Quality – Color Ma tching dropdown (continued) Step Procedure 4 As needed, return all options to their factory settings by clicking on the Default button. ...

  • FARGO electronic HDP5000 - page 247

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-43 Adjusting for the Resin Dither Select the appropriate dither method according to the type of image to be printed. ( Note: This option only affects those objects printed on the backside of a card with the resin black Panel of a YMCK or ...

  • FARGO electronic HDP5000 - page 248

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-44 Using the Advanced Image Color window Step Procedure 1 Click on the Advanced Settings button to bring up the Advanced Image Color window. See below. ...

  • FARGO electronic HDP5000 - page 249

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-45 Using the Advanced Image Color window (continued) Step Procedure 2 For the Image Quality slider bar controls, see below. • Click OK to accept any variance from the default (for this specific slider bar) and return to the Image Color ...

  • FARGO electronic HDP5000 - page 250

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-46 Using the Advanced Image Color window (continued) See the previous page. ...

  • FARGO electronic HDP5000 - page 251

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-47 Using the Advanced Image Color window (continued) Step Procedure 3 For the Balance slider bar controls, see below. • Click OK to accept any variance from the default (for this specific slider bar) and return to the Image Color tab w ...

  • FARGO electronic HDP5000 - page 252

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-48 Using the Advanced Image Color window (continued) See the previous page. ...

  • FARGO electronic HDP5000 - page 253

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-49 Using the Advanced Image Color window Step Procedure 4 Click on the Default button to clear changes back to the default settings f or this window only. See below. ...

  • FARGO electronic HDP5000 - page 254

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-50 Using the Default button on the Image Color tab Step Procedure 1 Click on the Default button to clear changes back to default setting for Im age Color tab only and NOT for the Advanced Image Color dialog box. See below. ...

  • FARGO electronic HDP5000 - page 255

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-51 Using the Image Transfer tab Use this tab to adjust the Image Position , Transfer Dwell Time and Transfer Temperature . ( Note: The HDP5000 Printing Preferences window has the same Image Color tab functionality as the HDP5000-LC Print ...

  • FARGO electronic HDP5000 - page 256

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-52 Adjusting the Image Position controls Use the Image Position controls to position the image on a card (to be adjusted). Step Procedure 1 Adjust the Image Position values by clicking on the Vertical and Horizontal adjustment arrows. ? ...

  • FARGO electronic HDP5000 - page 257

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-53 Adjusting the Image Positi on controls (continued) The display (below) represents how the printed image will move in relati on to the fixed card position as positive and negative image placement values are entered. Step Procedure 2 Fo ...

  • FARGO electronic HDP5000 - page 258

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-54 Adjusting the Transfer Dwell Time and Temperature Use the Image Transfer option to control of the Transfer Dwell Time and Transfer Temperature . • These settings control the speed and temperature at which printed images are transfer ...

  • FARGO electronic HDP5000 - page 259

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-55 Adjusting the Transfer Dwell Time and Temperature (continued) Step Procedure 2 Transfer Temperature Sets temperature for InTM transfer in Celsius Lower limit = 150.0 Celsius, Upper limit = 190.0 Celsius • UltraCard III - Composite: ...

  • FARGO electronic HDP5000 - page 260

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-56 Adjusting the Transfer Dwell Time and Temperature (continued) ...

  • FARGO electronic HDP5000 - page 261

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-57 Adjusting the Transfer Dwell Time and Temperature Step Procedure 3 Return to the factory default settings for the selected Card Type by clicking on the Default button. If using cards (that differ from the Card Type Glossy- PVC or Matt ...

  • FARGO electronic HDP5000 - page 262

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-58 Using the Default button Step Procedure 1 Use the Default button to reset the Transfer Dwell Time and Transfer Temperature to defaults for current Card Type choice. See below. ...

  • FARGO electronic HDP5000 - page 263

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-59 Using the Magnetic Encoding tab Use these options only if the Printer has an optional Magnetic Stripe Encoding Module installed. ( Note: If no Encoder is detected, the tab is act ive but all functions are grayed out.) Step Procedure 1 ...

  • FARGO electronic HDP5000 - page 264

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-60 Using the Encoding Mode dropdown list Use the Encoding Mode option to specify which magnetic encoding standard to use. Category Description Installation The HDP Card Printer can be installed with one of two types of factory-installed ...

  • FARGO electronic HDP5000 - page 265

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-61 Using the Encoding Mode dropdown list (continued) Category Description Custom Encoding selection (active and inactive functions) If you select Custom Encoding , all options are active. The Default is ISO Encoding. ( Note: The defaults ...

  • FARGO electronic HDP5000 - page 266

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-62 Using the Encoding Mode dropdown list (continued) Category Description Raw Binary Encoding selection (active and inactive functions) If you select Raw Binary Encoding , you send down a raw binary string rather than a formatted set of ...

  • FARGO electronic HDP5000 - page 267

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-63 Using the Encoding Mode dropdown list Category Description JIS II Encoding selection (active and inactive functions) If you select JIS II Encoding , specific standards are used. ( Note: This selection disables all the Magnetic Track O ...

  • FARGO electronic HDP5000 - page 268

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-64 Selecting the Coercivity/Magnetic Track Use the ISO option for encoding capability for either high- or low-coercivit y cards on tracks 1, 2 and 3 and is the industry's standard mode of magnetic encoding. Step Procedure 1 Select t ...

  • FARGO electronic HDP5000 - page 269

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-65 Reviewing the Shift Data Left Function Use the Shift Data Left option, which applies to all tracks when selected. ( Note: When this option is unchecked, it is the default.) Step Procedure 1 Select this option to shift the recorded mag ...

  • FARGO electronic HDP5000 - page 270

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-66 Reviewing the Magnetic Track Options Use these options to customize the ISO encoded data format for each of the Magnetic Stripe's three tracks. ( Note: Click Default to reset the defaults for the cur rent Magnetic Track Options t ...

  • FARGO electronic HDP5000 - page 271

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-67 Reviewing the Magnetic Track Options ...

  • FARGO electronic HDP5000 - page 272

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-68 Using the Magnetic Track Options Use the Magnetic Track options for these purposes: • Customize the ISO-encoded data format for each of the Magnetic Stripe's three tracks. • Customize each track independently of the other two ...

  • FARGO electronic HDP5000 - page 273

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-69 Using the Magnetic Track Options See the previous page. ...

  • FARGO electronic HDP5000 - page 274

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-70 Using the Character Size buttons Use this option to customize the Character Data Size (Bits per Character) used to encode the magnetic data on the currently selected track. ( Note: This character size includ es the parity bit (if enab ...

  • FARGO electronic HDP5000 - page 275

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-71 Using the ASCII Offset dropdown list Use this option to customize the Character ASCII Offset used to encode the magnetic data on the currently selected track. ( Note: This character-offset value is subtracted from the ASCII value of e ...

  • FARGO electronic HDP5000 - page 276

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-72 Using the Bit Density dropdown list Use this option to customize the Bit Recording Density (Bits per Inch) used to encode the magnetic data on the currently selected track. The default ISO Standard selections for this option are as fo ...

  • FARGO electronic HDP5000 - page 277

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-73 Using the LRC Generation dropdown list Use this option to customize the LRC Generation Mode (used to encode the magnetic data on the currently selected track). Step Procedure 1 • Select No LRC to change the LRC Generation to none. O ...

  • FARGO electronic HDP5000 - page 278

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-74 Using the Encoding Mode dropdown list Use this option to customize the Encoding Mode (used to encode the magnetic data on the currently selected track). Step Procedure 1 • Select No Parity to change the Character Parity to none. OR ...

  • FARGO electronic HDP5000 - page 279

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-75 Reviewing the ISO Track Locations The magnetic Encoding Module encodes onto tracks in acco rdance with an ISO 7811-2 Magnetic Stripe. For track locations, review the display below . TRACK1 0. 1 10" TRACK2 0. 1 10" TRACK3 0. ...

  • FARGO electronic HDP5000 - page 280

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-76 Sending the Track Information Magnetic track data is sent in the form of text strings from the application software to the Printer Driver. • In order for the Printer Driver to differentiate between Magnetic Track data and the rest o ...

  • FARGO electronic HDP5000 - page 281

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-77 Reviewing the Sample String • Track 1: ~1%JULIEANDERSON^1234567890? • Track 2: ~2;1234567890987654321? • Track 3: ~3;1234567890987654321? Track Start Sentinel End Sentinel Field Separator Valid Characters Maximum Number of Chara ...

  • FARGO electronic HDP5000 - page 282

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-78 Reviewing the ASCII Code and Character Table ASCII Code Character A SCII Code Char acter ASCII Code Character 32 space 56 8 80 P 33 ! 57 9 81 Q 34 58 : 82 R 35 # 59 ; 83 S 36 $ 60 < 84 T 37 % 61 = 85 U 38 and 62 > 86 V 39 ' ...

  • FARGO electronic HDP5000 - page 283

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-79 Using the Default button (Image Transfer tab) Step Procedure 1 Use the Default button to reset defaults for the current Track tab only. See below. ...

  • FARGO electronic HDP5000 - page 284

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-80 Using the Lamination tab (HDP5000-LC) Use this option to control specific Printer f unctions. These options allow you to control the Printer's Lamination process. ( Note: When no Laminator is detected, the Lamination tab is activ ...

  • FARGO electronic HDP5000 - page 285

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-81 Selecting the Lamination Position Step Procedure 1 Use the Lamination Position control to adjust the horizontal position of the PolyGuard Overlaminate. ( Note: This control functions in the same manner as the Image Position controls, ...

  • FARGO electronic HDP5000 - page 286

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-82 Adjusting the Lamination Sp eed - Transfer Dwell Time Step Procedure 1 Adjust the Transfer Dwell Time to control the Lamination Dwell Time or through-put speed of a card in seconds per inch and the Lamination Temperature. • Default ...

  • FARGO electronic HDP5000 - page 287

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-83 Selecting the Lamination Side dropdown menu Step Procedure 1 a. Select the No Lamination option if you do not want to use the Printer's built-in Laminator. b. Select Laminate Front Side , Laminate Back Side , Laminate Both Sides ...

  • FARGO electronic HDP5000 - page 288

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-84 Reviewing the Card Lamination Module Unit table (No Flipper versus Flipper) No Flipper Flipper Single Side Card Lamination Unit (Lower) No Supplies None None Lam Supply in Lower Only None Front Side of Card None Front Side of Card Bac ...

  • FARGO electronic HDP5000 - page 289

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-85 Selecting the Lamination Type Step Procedure 1 Select one of the Lamination Type options, according to which type of Lamination media is currently install ed. Two types of overlaminates are supported by the Driver: Film Lamination and ...

  • FARGO electronic HDP5000 - page 290

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-86 Selecting the Lamination Type (continued) See previous page. ...

  • FARGO electronic HDP5000 - page 291

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-87 Adjusting the Lamination Temperature Step Procedure 1 Adjust the Transfer Temperature to control the Lamination Temperature . • Default = 145.4 Celsius • Upper Limit = 170.0 Celsius • Lower Limit = 50.0 Celsius ...

  • FARGO electronic HDP5000 - page 292

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-88 Selecting the Defaults button Step Procedure 1 Click on the Default button to return the Transfer Dwell Time and Transfer Temperature to the Default settings for the Lamination Type (being used). ...

  • FARGO electronic HDP5000 - page 293

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-89 Using the K Panel Resin tab Use this tab to adjust the Card Size, the Direction the Card Travels through the Printer, the Print All Black with K Panel (options) and the Defined Areas. Use this tab to control w here the resin black (K) ...

  • FARGO electronic HDP5000 - page 294

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-90 Using the Scroll controls Controls Description Horizontal changes the size of the area from left to right • Default = 0.200 inches (5.1 mm) • Upper Limit = 3.450 inches (87.6 mm) • Lower Limit = 0.200 (cannot be null) Vertical c ...

  • FARGO electronic HDP5000 - page 295

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-91 Using the Click and Drag capability Click and drag the corners and the sides of an area to chang e size and location of area. • The Horizontal, Vertical size and X, Y coordinates update a ccordingly. Click and drag the area to chang ...

  • FARGO electronic HDP5000 - page 296

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-92 Selecting the Full Card Step Procedure 1 Select the Full Card option to print the resin black (K) Panel for all black found within all areas of the image, as shown below. • The Card image becomes fully black. • The resin prints an ...

  • FARGO electronic HDP5000 - page 297

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-93 Selecting the Defined Area(s) Step Procedure 1 Select the Defined Area(s) option to print the resin black (K) Panel for all black found only in an area or areas defined, as shown belo w. • The card image becomes white with the grid ...

  • FARGO electronic HDP5000 - page 298

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-94 Selecting the Undefined Area(s) Step Procedure 1 Select the Undefined Area(s) option to print the resin black (K) Panel for all black found only in the space outside the areas defined, as shown below. • The card image becomes black ...

  • FARGO electronic HDP5000 - page 299

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-95 Defining the Area to acti vate the Card Grid Step Procedure 1 Select on the appropriate Defined Area (see below) to activate the card grid in the upper half of the window. • It is through this card grid that up to five areas can be ...

  • FARGO electronic HDP5000 - page 300

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-96 Measuring the Total Card area Step Procedure 1 Determine the area of the card to define. ( Note: This area is indicated by the dashed outline, as shown below. The easiest way to determine the size of this area is to actually print a c ...

  • FARGO electronic HDP5000 - page 301

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-97 Measuring the Area to be positioned on the Card Step Procedure 1 Once the area is sized properly, measure the location where this area is to be positioned on the card. a. Measure from the lower left corner of the card up and over to t ...

  • FARGO electronic HDP5000 - page 302

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-98 Selecting the Print YMC under th e K and Print K Only options Step Procedure 1 Use the Defined Area function. a. Define another area by clicking on the Defined Area. ( Note: Another .2 x .2 (5mm x 5mm) area will appear in the lower le ...

  • FARGO electronic HDP5000 - page 303

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-99 Selecting the Print YMC under the K and Print K Only options ...

  • FARGO electronic HDP5000 - page 304

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-100 Using the Printer Supplies tab Use the options on this tab to view information about the Ribbon, HDP Film, Laminate (Cartridge 1) and Laminate (Cartridge 2) installed in the Printer. ( Note: The gauges are horizontal.) ...

  • FARGO electronic HDP5000 - page 305

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-101 Reviewing Information on the Supplies tab Here are the guidelines for automatic positioning on the Supplies tab. Step Procedure 1 Use this tab to determine the following information (see below): • Ribbon Level: Type, Reorder Number ...

  • FARGO electronic HDP5000 - page 306

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 8-102 Reviewing Information on the Supplies tab Relates to the procedure on the previous page. ...

  • FARGO electronic HDP5000 - page 307

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 9-1 Section 9: T oolbox This section describes the Toolbox function. Accessing the Toolbox Step Procedure 1 Select Toolbox to access the Toolbox window and its tabs, as shown throughout this section. • OK button: Closes the dialog box an ...

  • FARGO electronic HDP5000 - page 308

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 9-2 Selecting the Configuration tab Step Procedure 1 Select the Configuration tab. • Under Printer Features, select featur es by clicking on a check box or by clicking on the Auto Select button. See instructions provided under that headi ...

  • FARGO electronic HDP5000 - page 309

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 9-3 Using the Configuration Tab Using the Optional Printer Features Group Box The Default setting is checked. • If checked, upon Configuration tab activation, the Driver retrieves the installed Printer features information from the Firmw ...

  • FARGO electronic HDP5000 - page 310

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 9-4 Using the Event Monitoring Group Box This Event Monitoring group box displays t he Low Supplies (Ribbon, Laminate and Film). • The default setting is checked. If checked, the Ribbon Low message box is displayed with every print job w ...

  • FARGO electronic HDP5000 - page 311

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 9-5 Reviewing the Laminate Low Message The default setting is checked. • If checked, Lamination Low message box is displayed with every print job when Printer reports low Ribbon to the Driver. • Do not show this message again. The chec ...

  • FARGO electronic HDP5000 - page 312

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 9-6 Using the Film Low message The default setting is checked. • If checked, Film Low message box is displayed with every print job when Printer reports low Ribbon to the Driver. • Do not show this message again. The check box allows t ...

  • FARGO electronic HDP5000 - page 313

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 9-7 Selecting the Calibrate Laminator tab The Calibrate Laminator tab is active when the Laminator is automatically detected or when the Laminator is manually checked (as a Printer Feature on the Configuration tab). If the Laminator is not ...

  • FARGO electronic HDP5000 - page 314

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 9-8 Selecting the Calibrate Film tab The two buttons for the Calibrate Film tab are described below. • Calibrate button: Sends calibrate film command to Printer. Follow the instruction o n the page for setting up the Printer. • Help bu ...

  • FARGO electronic HDP5000 - page 315

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 9-9 Selecting the Calibrate Ribbon tab The two buttons for the Calibrate Ribbon tab are described below. • Calibrate button: Sends the Calibrate Ribbon Command to Printer. Follow the instructions below to set up the Printer. • Help but ...

  • FARGO electronic HDP5000 - page 316

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 9-10 Selecting the Clean Printer tab The button for the Clean Printer tab is described below. • Clean Button: Launches cleaning routine. Follow the instr uction on the page for setting up the Printer. • Help button: Launches help that ...

  • FARGO electronic HDP5000 - page 317

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 9-11 Selecting the Clean Pr inter tab (continued) See the procedure on the previous page. ...

  • FARGO electronic HDP5000 - page 318

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 9-12 Using the Clean Printer Group Box The default setting is checked. If checked, Printer Cleaning Notification dialog box is displayed when Firmware EE setting changes after 3000 cards. ( Note: Firmware EE setting resets upon clean comma ...

  • FARGO electronic HDP5000 - page 319

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 9-13 Selecting the Advanced Settings tab Use the Advanced Settings tab for adjusting the internal Printer settings, which are customized for every Printer at the factory and saved directly within the Printer's memory. ( Note: You can ...

  • FARGO electronic HDP5000 - page 320

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 9-14 Selecting the Advanced Settings tab (continued) These change values for Firmware settings. See below. • Setting Column: Displays label for setting • Default Column: Displays default value for setting • Current Column: Displays c ...

  • FARGO electronic HDP5000 - page 321

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 9-15 Reviewing the No Printer Connected error message If there is no Printer connected or if the Driver is unable to communicate with the Printer, the following error will be displayed and the grid will be blank. Reviewing the Value outsid ...

  • FARGO electronic HDP5000 - page 322

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 10-1 Section 10: Cleaning HDP5000 Cleaning Kit part number is 089200. For more detailed instruction, please refer to the Cleaning Kit Instruction Sheet in the kit. Important: The Printer should be cleaned on a regular basis to ensure that ...

  • FARGO electronic HDP5000 - page 323

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 10-2 Safety Messages (review carefully) Symbol Critical Instructions for Safety purposes Danger: Failure to follow these installation guidelines can result in death or serious injury. Information that raises potential safety issues is indi ...

  • FARGO electronic HDP5000 - page 324

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 10-3 Accessing the Clean Printer tab Cleaning the Printer Platen Ro ller and Card Feed Rollers Perform this procedure approximately every 1,000 prints to maintain a consistent print quality. ( Note: The Card Feed Rollers move the card thro ...

  • FARGO electronic HDP5000 - page 325

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 10-4 Cleaning the Printer Platen Rolle r and Card Feed Rollers (cont) Display A – Clean Printer window Display B - Cleaning Card setup for Magnetic Encoder ...

  • FARGO electronic HDP5000 - page 326

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 10-5 Cleaning Procedures Cleaning inside the Printer Step Procedure 1 Open the Front Cover. 2 Remove the Print Ribbon and HDP transfer Film from the Printer. 3 If you have a can of compressed air, blow out all visible areas of the Printer ...

  • FARGO electronic HDP5000 - page 327

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 10-6 Cleaning the Printhead Clean the Printhead (every time the Print Ribbon is changed) to maintain consistent print quality, as instructed below. This procedure s hould also be performed approximately every 1000 prints in order to mainta ...

  • FARGO electronic HDP5000 - page 328

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 10-7 Replacing the Card Cleaning Roller Caution: Replace the Card Cleaning Tape approximately every time the Print Ribbon is changed. Steps Procedure 1 Remo ve the Card Cartridge to access the Cleaning Roller. 2 Remo ve the cleaning roller ...

  • FARGO electronic HDP5000 - page 329

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 10-8 Cleaning the Magnetic Encoder Step Procedure 1 Open the front cover and remove the Film Cartridge. 2 Remo ve the Magnetic Cover to access the Magnetic Head. 3 Remo ve the Magnetic Head. See Display A below. 3 Use an alcohol wipe from ...

  • FARGO electronic HDP5000 - page 330

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 11-1 Section 11: Fargo W orkbench Printer Utility Click on Diagnostics to bring up the Fargo Workbench Printer Utility. See the Fargo Workbench Printer Utility Help File for further instructions on each option. Reviewing the Card tab and D ...

  • FARGO electronic HDP5000 - page 331

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 11-2 Reviewing the Card tab and Diagnostic button (continued) Display B – Fargo Workbench Printer Utility (see the appropriate User Guide located on your CD) ...

  • FARGO electronic HDP5000 - page 332

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 12-1 Section 12: Packing the Card Printer The purpose of this section is to provide the User with a specific pa cking procedure for the HDP5000. ( Note: Do not install the Lamination Module to the Printer before shipping. The Lamination Mo ...

  • FARGO electronic HDP5000 - page 333

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 13-1 Section 13: Firmware Up dates The purpose of this section is to provide the User with information on the internal soft ware or Firmware, which controls all aspects of the Pr inter's operation. New Firmware versions may be release ...

  • FARGO electronic HDP5000 - page 334

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 13-2 Performing the Firmware Updates (continued) Display B – Fargo Workbench Printer Utility (Printer Information tab) ...

  • FARGO electronic HDP5000 - page 335

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 13-3 Performing the Firmware Updates (continued) Step Procedure 2 This will launch the Fargo Support page. • Click on the Firmware selection box. • Using the drop down menu, select the Printer. • Click on the Go button, as shown belo ...

  • FARGO electronic HDP5000 - page 336

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 13-4 Performing the Firmware Updates (continued) Step Procedure 4 Click on the Printer name under Printer Firmware to begin the download. 5 Click on the Save button to save the file. 6 Click on the Save button to save the file to the compu ...

  • FARGO electronic HDP5000 - page 337

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 13-5 Performing the Firmware Updates (continued) Step Procedure 12 Select Upgrade Firmware in the Actions dropdown menu, as shown below. This brings up the Upgrade Firmware window, as shown below. See the Fargo Workbench Printer Utility Us ...

  • FARGO electronic HDP5000 - page 338

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 13-6 Performing the Firmware Updates Step Procedure 13 • Select the Desktop from the Browse menu. • Click on the .frm file. • Click on the Open button. • Click on Upgrade to send the Firmware to the Printer. 14 This completes the F ...

  • FARGO electronic HDP5000 - page 339

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 14-1 Section 14: Fargo T echnical Support The purpose of this section to provide the User with an efficient, step-by-step procedure to be used when contacting Fargo Technical Support as needed for the HDP5000. Contacting Fargo Technical Su ...

  • FARGO electronic HDP5000 - page 340

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 14-2 Reading the Serial Numbers on a Fargo Printer The purpose of this section is to provide updated instructions for reading serial numbers on a Fargo Printer. Finding out when a Fargo Ca rd Printer was manufactured You can determine when ...

  • FARGO electronic HDP5000 - page 341

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 15-1 Section 15: Reviewing S p are Part s List s Reviewing Spare Parts List for HDP5000 and HDP5000-LC HDP5000 Series Recommended Spare Parts List Effective Date: To be added at a later date For current pricing see http://www.fargopartner. ...

  • FARGO electronic HDP5000 - page 342

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 16-1 Section 16: Glossary of T erms Term Definition 24-bit color A color depth for an image that uses 8 bits for each color (red, blue, green) combining the possible 256 shades to provide a color depth of 16.7 million colors. AC - Alternat ...

  • FARGO electronic HDP5000 - page 343

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 16-2 Glossary of Terms (continued) Term Definition Barcodes A series of alternating black and white stripes, of varying widths (each character denoted by a set number and width of black stripes) that allows characters to be optically read ...

  • FARGO electronic HDP5000 - page 344

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 16-3 Glossary of Terms (continued) Term Definition Cache A type of memory Buffer to store data temporarily, used to hold information that is most often exchanged between controller and peripheral, to expedite data transfer. Calibrating A p ...

  • FARGO electronic HDP5000 - page 345

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 16-4 Glossary of Terms (continued) Term Definition CR-79 A card dimension standard of 2.0625 L X 3.3125 W (+/-0.002 W, +/-0.005 L) or 52.400 X 84.150 mm. CR-80 A card dimension standard of 2.125 X 3.370 (+/-0.002 W, +/- 0.005 L) or 53.975 ...

  • FARGO electronic HDP5000 - page 346

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 16-5 Glossary of Terms (continued) Term Definition Direct-to-Card (DTC) Printing The Direct-to-Card printing process prints digital images directly onto any plastic card with a smooth, clean, glossy PVC surface. Dither A system of distribu ...

  • FARGO electronic HDP5000 - page 347

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 16-6 Glossary of Terms (continued) Term Definition Dwell Time The speed at which the card moves across the Transfer and Lamination Roller, measured in seconds/inch (sec/in). This can be adjusted in the Driver to ensure adhesion and card fl ...

  • FARGO electronic HDP5000 - page 348

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 16-7 Glossary of Terms (continued) Term Definition Encoder (wheel) An electromechanical device, attached to a shaft that detects the change in rotational position, incremented to count ticks per revolution. The Printer's Encoder wheel ...

  • FARGO electronic HDP5000 - page 349

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 16-8 Glossary of Terms (continued) Term Definition Flash Memory A microchip based non-volatile memory device that holds its data when power is removed. This allows for field reprogramming of the Printer commands, such as Printer Firmware u ...

  • FARGO electronic HDP5000 - page 350

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 16-9 Glossary of Terms (continued) Term Definition Hard Drive A high capacity storage device in a PC consisting of non- removable magnetically encodable platters. Hardware Physical components of a system such as the Printer, the PC, the po ...

  • FARGO electronic HDP5000 - page 351

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 16-10 Glossary of Terms (continued) Term Definition IEEE 1284 (Institute of Electrical and Electronics Engineers 1284) A standard method of signaling for a bi-directional parallel interface on personal computers. To ensure proper Printer c ...

  • FARGO electronic HDP5000 - page 352

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 16-11 Glossary of Terms (continued) Term Definition Landscape A document layout that is viewed with the document's long axis in a horizontal orientation. LCD (Liquid Crystal Display) A device that contains a liquid crystal between two ...

  • FARGO electronic HDP5000 - page 353

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 16-12 Glossary of Terms (continued) Term Definition MB (Megabyte) A unit of sto rage that equals 1,048,576 bytes. Memory A generic term for any device that stores digital information using magnetic media or digital chip storage device. Men ...

  • FARGO electronic HDP5000 - page 354

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 16-13 Glossary of Terms (continued) Term Definition Oversized Cards Oversized cards are used for more efficient visual identification and are available in many non-standard sizes. The most popular sizes are CR-90 (3.63 x 2.37/92mm x 60mm) ...

  • FARGO electronic HDP5000 - page 355

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 16-14 Glossary of Terms (continued) Term Definition Pinch Roller A free spinning (non-driven) Roller that presses the card against the drive Roller, on the opposite side, to ensure an adequate normal force for proper traction. Pixel Short ...

  • FARGO electronic HDP5000 - page 356

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 16-15 Glossary of Terms (continued) Term Definition Printhead The device on a Printer that produces the image on the media. PVC Abbreviation for polyvinyl chloride, often called vinyl. PVC is the component of the 0.002 thick clear, dye rec ...

  • FARGO electronic HDP5000 - page 357

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 16-16 Glossary of Terms (continued) Term Definition Resolution The number of individual pixels in a graphic, taken over a given length, used to indicate the sharpness of the picture and the level of detail. The number of elements in the Pr ...

  • FARGO electronic HDP5000 - page 358

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 16-17 Glossary of Terms (continued) Term Definition Saturation A measure of the degree of color, from gray, with the same brightness. Self-test A pre-determined print file used to confirm Printer operation typically sent from the Driver or ...

  • FARGO electronic HDP5000 - page 359

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 16-18 Glossary of Terms (continued) Term Definition Spooling Rather than moving a print job directly to the Printer, the job is written to the disk so that the user can access the application faster while Windows takes care of printing in ...

  • FARGO electronic HDP5000 - page 360

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 16-19 Glossary of Terms (continued) Term Definition Thermocouple A device for measuring temperature using a junction of two wires of dissimilar metals that produce a voltage when heated that varies proportionally with the temperature. Thin ...

  • FARGO electronic HDP5000 - page 361

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 16-20 Glossary of Terms (continued) Term Definition UPS (Un-interruptible Power Supply) An AC powe r supply, typically powered by batteries, which provides temporary power to the PC or Printer during an interruption of the supply voltage. ...

  • FARGO electronic HDP5000 - page 362

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 17-1 Section 17: Index A About button, 8-21 absolute failure, 8-7 AC - Alternating Current, 16-1 accelerated wear /dye migration, 8-5 Accepted Card Compositions, 8 -3, 8-13 Accepted Card Thicknes s, 2-7 Accepted Card Types or Compos itions ...

  • FARGO electronic HDP5000 - page 363

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 17-2 Dither, 16-5 dither method, 8-43 DMA (Direct Memory Access), 16-3 Dongle, 16-5 Dot, 16-5 Dot pitch, 16-5 Download, 16-5 DPI (Dot Per Inch), 16-5 DRAM (Dynamic Random Access Memory), 16-5 Driver, 16-5 Duplex Printing, 16-5 dwell temper ...

  • FARGO electronic HDP5000 - page 364

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 17-3 IPC, 8-7 ISO, 16-10 ISO 7811-2 Magnetic Stripe, 8-75 ISO encoded data format, 8-67 ISO option, 8-64 ISO Track Locations, 8-75 J JIS C 6220 Type II cards, 8-60 JIS II (Japanese Industrial Standard), 16-10 K K Panel, 16-10 K Panel Resin ...

  • FARGO electronic HDP5000 - page 365

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 17-4 Print Server, 16-14 Print Speed, 2-13 Print Speed-Batch Mode, 2-13 Print Station, 10-6 Print Status Screen, 2-19 Print Test Image , 5-39 print the first page of a two-page document, 8-32 Print Width, 2-8, 8-12 Print YMC Under K and Pr ...

  • FARGO electronic HDP5000 - page 366

    RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.2) 17-5 total card area, 8 -96 Track, 16-19 Track Information, 8-76 track number (1, 2 or 3), 8-76 Transfer Count, 5-42 Transfer Dwell Time/Tem perature, 8-54 transferred HDP Film, 8-5 troubleshoot the Printer, 14-1 Troubleshooting, 5-1, 16-1 ...

Manufacturer FARGO electronic Category Printer

Documents that we receive from a manufacturer of a FARGO electronic HDP5000 can be divided into several groups. They are, among others:
- FARGO electronic technical drawings
- HDP5000 manuals
- FARGO electronic product data sheets
- information booklets
- or energy labels FARGO electronic HDP5000
All of them are important, but the most important information from the point of view of use of the device are in the user manual FARGO electronic HDP5000.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals FARGO electronic HDP5000, service manual, brief instructions and user manuals FARGO electronic HDP5000. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product FARGO electronic HDP5000.

Similar manuals

A complete manual for the device FARGO electronic HDP5000, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use FARGO electronic HDP5000 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of FARGO electronic HDP5000.

A complete FARGO electronic manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual FARGO electronic HDP5000 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the FARGO electronic HDP5000, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the FARGO electronic HDP5000, that we can find in the current document
3. Tips how to use the basic functions of the device FARGO electronic HDP5000 - which should help us in our first steps of using FARGO electronic HDP5000
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with FARGO electronic HDP5000
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of FARGO electronic HDP5000 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning FARGO electronic HDP5000?

Use the form below

If you did not solve your problem by using a manual FARGO electronic HDP5000, ask a question using the form below. If a user had a similar problem with FARGO electronic HDP5000 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)