English dropdown-ico

Manual Dukane 8065

114 pages 7.37 mb
Download

Go to site of 114

Summary
  • Dukane 8065 - page 1

    Portable LCD Pr ojector Models 8755D, 8755D-RJ & 8065 USER’S MANUAL 401-8755D-01 ...

  • Dukane 8065 - page 2

    ...

  • Dukane 8065 - page 3

    1 Projector CP-S24 / , 8755D-RJ, & 8065 P-X250 User's Manual – Operating Guide Thank you for purchasing this projector . About this manual V arious symbols are used in this manual. The meanings of these symbols are described below . WARNING This symbol indicates information that, if ignored, could possibly result in personal injury or ev ...

  • Dukane 8065 - page 4

    2 About this manual . . . . . . . . . . 1 Content . . . . . . . . . . . . . . . . . . 2 Projector features . . . . . . . . . . 3 Prepar ations . . . . . . . . . . . . . . 3 About contents of package . . . . . . . 3 Fastening the lens cover . . . . . . . . . 3 Par t names . . . . . . . . . . . . . . . 4 Projector . . . . . . . . . . . . . . . . . . ...

  • Dukane 8065 - page 5

    3 F astening the lens co ver T o avoid losing the lens cover , please fasten it the lens cap to the projector using the strap. 1. Fix the strap to the strap ring of the lens cover . 2. Put the strap into the groove on the rivet. 3. Push the rivet into the strap hole. Projector features / Prepar ations Projector features This projector is used to pr ...

  • Dukane 8065 - page 6

    4 Par t names Part names Lens (  17 ) Filter cover (  42 ) (Air filter and intake vent are inside.) Elevator button (  9 ) Elevator foot (  9 ) Remote sensor (  16 ) Zoom knob (  19 ) Focus ring (  19 ) V ent (  7 ) Projector Lamp cover (  41 ) (Lamp unit is inside.) Bottom side Speaker Lens cover (  3 ) Security bar ...

  • Dukane 8065 - page 7

    5 Y R L AUDIO IN 2 AUDIO OU T CONTROL RGB IN 1 RGB IN 2 USB RGB OU T AUDIO IN 1 VIDE O S-VIDEO C B / P B C R / P R K AC inlet (  14 ) Power switch (  17 ) Elevator button (  9 ) COMPONENT VIDEO ports (  13 ) Y C B /P B C R /P R S-VIDEO port (  13 ) VIDEO port (  13 ) CONTROL port (  12) Elevator foot (  9 ) Rear-Left side Po ...

  • Dukane 8065 - page 8

    6 SEARCH button (  19 ) RGB button (  18 ) VIDEO button (  19 ) ASPECT button (  19 ) HOME button (  23 ) MAGNIFY ON button (  21 ) OFF button (  21 ) END button (  23 ) FREEZE button (  22 ) POSITION button (  20 ) ESC button (  24 ) Par t names R emote contr ol Battery cover (  15 ) (on the back) ST ANDBY/ON bu ...

  • Dukane 8065 - page 9

    7 Setting up Setting up WARNING ►Place the projector in a stable position horizontally . A fall or a turnover could cause an injury and/or damage to the projector . U sing a damaged projector could result in a fire and/or an electric shock. • Do not place the projector on an unstable, slant or vibrant surface such as a wobbly or inclined stand ...

  • Dukane 8065 - page 10

    8 Ar r angement Refer to the illustrations a nd tables below to determine the screen size and projection d istance. The values shown in the table are calculated for a full size screen: TBD : 800×600, 8755D : 1024×768 (a) The screen size (diagonal) (b) Distance from the projector to the screen (±10%) (c) The height of the screen (±10%) Setting u ...

  • Dukane 8065 - page 11

    9 Adjusting the projector's eleva tor CA UTION ►If you press the elevator button without holding the projector , the projector might crash down, overturn, smash your fingers and possibly result in malfunction. T o prevent damaging the projector and injuring yourself, always hold the projector whenever using the elevator buttons to adjust th ...

  • Dukane 8065 - page 12

    10 Setting up Using the Security Bar WARNING ►Do not use the security bar to prevent the projector from falling. Dropping or knocking over the projector may cause damage or injury . A commercial anti-theft chain or wire can be attached to the security bar on the projector . 1. How to attach An anti-theft chain or wire can be attached as shown in ...

  • Dukane 8065 - page 13

    1 1 Setting up Connecting your de vices CA UTION ►T urn off all devices prior to connecting them to the projector . Attempting to connect a live device to the projector may generate extremely loud noises o r other abnormalities that may result in ma lfunction and/or damag e to the device and/or projector. ►Use the accessory cable or a designate ...

  • Dukane 8065 - page 14

    12 Setting up Examples of connection with a computer * In the default setting, the AUDIO IN1 port is the audio port for the RGB IN1 and RGB IN2 ports. T o change the settings, refer to the AUDIO item in the SETUP menu. (  34 ) Y R L AUDIO IN 2 AUDIO OU T CONTROL RGB IN 1 RGB IN 2 USB RGB OU T AUDIO IN 1 VIDE O S-VIDEO C B / P B C R / P R K Y R L ...

  • Dukane 8065 - page 15

    13 Y R L AUDIO IN 2 AUDIO OUT CONTROL RGB IN 1 RGB IN 2 USB RGB OU T AUDIO IN 1 VIDE O S-VIDEO C B / P B C R / P R K Y R L AUDIO IN 2 AUDIO OUT CONTROL RGB IN 1 RGB IN 2 USB RGB OU T AUDIO IN 1 VIDE O S-VIDEO C B / P B C R / P R K Y R L AUDIO IN 2 AUDIO OUT CONTROL RGB IN 1 RGB IN 2 USB RGB OU T AUDIO IN 1 VIDE O S-VIDEO C B / P B C R / P R K Y R L ...

  • Dukane 8065 - page 16

    14 Setting up Connecting pow er suppl y WARNING ►Please use extra caution when connecting the power cord, as incorrect or faulty connections may result in fire and/or electrical shock. • Only use the power cord that came with the projector . If it is damaged, contact your dealer to newly get correct one. • Only plug the power cord into an ou ...

  • Dukane 8065 - page 17

    15 Putting batteries WARNING ►Always handle the batteries with care and use them only as directed. Improper use may result in battery explosion, cracking or leakage, which could result in fire, injury and/or pollution of the surrounding environment. • Be sure to use only the batteries specified. Do not use batteries of different types at the ...

  • Dukane 8065 - page 18

    16 Using the remote contr ol CA UTION ►Be careful in handling the remote control. • Do not drop or expose the remote control to physical impact. • Do not get the remote control wet or place it on wet objects. It may result in malfunction. • Re mo ve t he ba tt er ie s fro m th e re mo te co nt ro l an d sto re t he m in a sa fe p la ce if y ...

  • Dukane 8065 - page 19

    17 Po wer on/off Power on/off WARNING ► When the power is on, a strong light is emitted. Do not look into the lens of projector . Also do not peep at the inside of projector through a hole. NO TE • T urn t he p ow er on /o f f in r igh t or de r . Pl eas e po we r on t he pr oj ec to r pri or to t he c on nec te d de vi ce s. Po we r of f t he ...

  • Dukane 8065 - page 20

    18 Operating Operating Adjusting the v olume 1. Press the VOLUME button on the remote control. A dialog will appear on the screen to aid you in adjusting the volume. 2. Use the cursor buttons ▲/▼ to adjust the volume. T o close the dialog and complete the operation, press the VOLUME button again. Even if you don’t do anything, the dialog will ...

  • Dukane 8065 - page 21

    19 Operating Adjusting the zoom and f ocus 1. Use the zoom knob to adjust the screen size. 2. Use the focus ring to focus the picture. Selecting an aspect ratio 1. Press the ASPECT button on the remote control. Each time you press the button, the projector switches the mode for aspect ratio in turn.  For an RGB signal NORMAL  4:3  16:9  ...

  • Dukane 8065 - page 22

    20 Operating Using the automatic adjustment f eature 1. Press the AUTO button on the remote control.  For an RGB signal The vertical position, the horizontal position, the clock phase and the horizontal size will be automatically adjusted. And the aspect ratio will be automatically selected. Make sure that the application window is set to its ma ...

  • Dukane 8065 - page 23

    21 Using the magnify feature 1. Press the ON button of MAGNIFY on the remote control. The “MAGNIFY” indication will appear on the screen (although the indication will disappear in several seconds with no operation), and the projector will enter the MAGNIFY mode. 2. Use the cursor buttons ▲/▼ to adjust the zoom level. T o move the zoom area ...

  • Dukane 8065 - page 24

    22 F reezing the scr een 1. Press the FREEZE button on the remote control. The “FREEZE” indication will appear on the screen, and the projector will enter the FREEZE mode. T o exit the FREEZE mode and restore the screen to normal, press the FREEZE button again. ● The projector automatically exits the FREEZE mode when the input signal changes, ...

  • Dukane 8065 - page 25

    23 Operating Operating the computer screen CA UTION ►Mistaken use of the mouse/keyboard control could damage your equipment. • While using this function, please connect only with a computer . • Before connecting, read the manuals of the computer you will connect. NOTE • It may not be possible to control notebook PC, and other computers with ...

  • Dukane 8065 - page 26

    24 Multifunctional settings Multifunctional settings Using the menu function This projector has the following menus: PICTURE, IMAGE, INPUT , SETUP , SCREEN, OPTION, and EASY MENU. EASY MENU cosists of functions often used, and the other menus are classified into each purpose. Each of these menus is operated using the same methods. The basic operat ...

  • Dukane 8065 - page 27

    25 Multifunctional settings EASY Menu Item Description ASPECT Using the buttons ◄/► switches the mode for aspect ratio. See the ASPECT item in the IMAGE menu (  30 ). KEYSTONE Using the buttons ◄/► corrects the keystone distortion. See the item KEYSTONE of section SETUP menu. (  21 ) MODE Using the buttons ◄/► switches the mode of ...

  • Dukane 8065 - page 28

    26 Multifunctional settings Item Description MIRROR Using the buttons ◄/► switches the mode for mirror status. See the MIRROR item in the SETUP menu (  34 ). RESET Performing this item resets all of the items of EASY MENU except FIL TER TIME and LANGUAGE. A dialog is displayed for confi rmation. Selecting RESET using the button ▲ performs ...

  • Dukane 8065 - page 29

    27 Multifunctional settings PICTURE Menu Item Description BRIGHTNESS Using the buttons ▲/▼ adjusts the brightness. : Light  Dark CONTRAST Using the buttons ▲/▼ adjusts the contrast. : Strong  Weak GAMMA Using the buttons ▲/▼ switches the GAMMA mode. #1 DEF AUL T  #1 CUST OM  #2 DEF AUL T #3 CUSTOM  #3 DEF AUL T  #2 CUS ...

  • Dukane 8065 - page 30

    28 Multifunctional settings Item Description COLOR TEMP Using the buttons ▲/▼ switches the mode of color temperature. HIGH  MIDDLE  LOW  CUSTOM T o adjust CUSTOM Selecting the CUSTOM and then pressing the button ► or the ENTER button displays a dialog to aid you in adjusting the OFFSET and/or GAIN of the CUSTOM mode. OFFSET adjustmen ...

  • Dukane 8065 - page 31

    29 Multifunctional settings Item Description PROGRESSIVE Using the buttons ▲/▼ switches the progress mode. TV  FILM  TURN OFF • This function is performed only for an interlaced signal of a VIDEO input, an S-VIDEO input or CONPONENT VODEO input of 525i (480i) or 625i (576i) signal. • When TV or FILM is selected, the screen image will ...

  • Dukane 8065 - page 32

    30 Multifunctional settings IMAGE Menu Item Description ASPECT Using the buttons ▲/▼ switches the mode for aspect ratio. For an RGB signal 4:3  16:9  NORMAL For a video signal / no signal 4:3  16:9  SMALL • The NORMAL mode keeps the original aspect ratio of the signal. • For an HDTV signal of 1 125i (1080i) or 750p (720p) as the ...

  • Dukane 8065 - page 33

    31 Multifunctional settings Item Description H SIZE Using the buttons ▲/▼ adjusts the horizontal size. Large  Small • This item can be selected only for an RGB signal. • When this adjustment is excessive, the picture may not be displayed correctly . In such a case, please reset the adjustment by pressing the RESET button on the remote co ...

  • Dukane 8065 - page 34

    32 Multifunctional settings INPUT Menu Item Description COLOR SP ACE Using the buttons ▲/▼ switches the mode for color space. AUTO  RGB  SMPTE240  REC709  REC601 • This item can be selected only for an RGB signal or a component video signal (except signals of 525i(480i)/625i(576i)/SCART RGB from the component video port). • The ...

  • Dukane 8065 - page 35

    33 Multifunctional settings INPUT Menu (continued) Item Description INFORMA TION Selecting this item displays a dialog titled “INPUT INFORMA TION”. It shows the information about the current input. INPUT-INFORMA TION RGB 1024x768 @60.0 FRAME LOCK INPUT-INFORMA TION S-VIDEO SECAM AUTO INPUT-INFORMA TION COMPONENT 576i @50 SCART RGB • The “FR ...

  • Dukane 8065 - page 36

    34 Multifunctional settings SETUP Menu Item Description KEYSTONE Using the buttons ▲/▼ corrects the keystone distortion. Upper in the data  Lower in the data • The adjustable range of this function will vary with the type of input signal. At some signals, this function may not work well. • When the V :INVERT or the H&V :INVERT is sel ...

  • Dukane 8065 - page 37

    35 Multifunctional settings SCREEN Menu Item Description LANGUAGE Using the buttons ▲/▼ switches the OSD (On Screen Display) language. SUOMI  POLSKI  TÜRKÇE ENGLISH  FRANÇAIS  DEUTSCH  ESP AÑOL  IT ALIANO NORSK  NEDERLANDS  PORTUGUÊS  日本語    SVENSKA  MENU POSITION Using the buttons ◄/►/▲/? ...

  • Dukane 8065 - page 38

    36 Multifunctional settings Item Description ST ART UP Using the buttons ▲/▼ switches the mode for the start-up screen. The start-up screen is a screen displayed when no signal or an unsuitable signal is detected. MyScreen  ORIGINAL  TURN OFF MyScreen is a screen you can register as a desired screen.The ORIGINAL screen is the existing sta ...

  • Dukane 8065 - page 39

    37 Multifunctional settings Item Description MESSAGE Using the buttons ▲/▼ turns on/off the message function. TURN ON  TURN OFF When the TURN ON is selected, the following message function works. “AUTO IN PROGRESS” while automatically adjusting ”NO INPUT IS DETECTED” ”SYNC IS OUT OF RANGE” "Searching….” while searching f ...

  • Dukane 8065 - page 40

    38 Multifunctional settings OPTION Menu Item Description AUTO SEARCH Using the bu ttons ▲/▼ turns on/ off the auto matic signal search function. TURN ON  TURN OFF This function works with INPUT , RGB, and VIDEO buttons. When the TURN ON is selected, detecting no signal automatically cycles through input ports in the following order . The sea ...

  • Dukane 8065 - page 41

    39 Multifunctional settings Item Description SERVICE Selecting this item displays the SERVICE menu. Select an item using the buttons ▲/▼, and press the button ► or the ENTER button on the remote control to execute the item. F AN SPEED  AUTO ADJUST  GHOST  KEY LOCK  FIL TER MESSAG  F ACTOR Y RESET F AN SPEED Using the buttons ? ...

  • Dukane 8065 - page 42

    40 Maintenance Maintenance Lamp WARNING HIGH VOL T AGE HIGH TEMPERA TURE HIGH PRESSURE ►The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetime, and some may burst or burn out soon after you s ...

  • Dukane 8065 - page 43

    41 Lamp (continued) A lamp has a finite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor . Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. Preparation of a new lamp and early replacement are recommended. T o prepare a new lamp, ...

  • Dukane 8065 - page 44

    42 If the air filter becomes clogged by dust or the like, internal temperatures rise and could cause a fire, a burn and/or malfunction to the projector . When the indicators or a message prompts you to clean the air filter , clean the air filter as soon as possible. Please check and clean the air filter periodically , even if there is no message. ...

  • Dukane 8065 - page 45

    43 Maintenance 4. Apply a vacuum cleaner to the air filter and the filter cover . Please replace the air filter when it is damaged or too soiled. 5. Replace the air filter in its original position. Secure the air filter in place by pressing each of the six locations. Make sure there is no dust or dirt remaining after the cover is in place. If ...

  • Dukane 8065 - page 46

    44 Maintenance WARNING ►Before caring, make sure the power switch is off and the power cable is not plugged in, and then allow the projector to cool sufficiently . The care in a high temperature state of the projector could cause a burn and/or malfunction to the projector . ►Never try to care for the inside of the projector personally . Doing ...

  • Dukane 8065 - page 47

    4 5 1. T urn the projector off, and unplug the power cord. Allow the projector to cool sufficiently . 2. After making sure that the projector has cooled adequately , slowly turn over the projector , so that the bottom is facing. 3. Remove the battery cover . T urn the battery cover in the direction indicated “OPEN” using such as coins. Then th ...

  • Dukane 8065 - page 48

    4 6 ...

  • Dukane 8065 - page 49

    4 7 T roubleshooting R elated messages When the unit's power is on, messages such as those shown below may be displayed. When any such message is displayed on the screen, please follow the instructions described below . If the same message is displayed after the remedy , or if a message other than the following appears, please contact your dea ...

  • Dukane 8065 - page 50

    4 8 T roubleshooting R e gar ding the indicator lamps Lighting and flashing of the POWER indicator , the LAMP indicator , and the TEMP indicator have the meanings as described in the table below . Please follow the instructions within the table. If the same indication is displayed after the remedy , or if an indication other than the following is ...

  • Dukane 8065 - page 51

    4 9 T roubleshooting Regarding the indicator lamps (continued) POWER indicator LAMP indicator TEMP indicator Description Blinking In Red or Lighting In Red T urned off Blinking In Red The cooling fan is not operating. Please turn the power off, and allow the projector to cool down at least 20 minutes. After the projector has sufficiently cooled do ...

  • Dukane 8065 - page 52

    50 T roubleshooting Phenomena that may be easy to be mistak en for mac hine defects WARNING ►Never use the projector if abnormal operations such as smoke, strange odor , excessive sound, damaged casing or elements or cables, penetration of liquids or foreign matter , etc. should occur . In such cases, immediately turn off the power switch and the ...

  • Dukane 8065 - page 53

    5 1 Pheno mena th at may be easy to be mistaken for ma chine d efects (cont inued) Phenomenon Cases not involving a machine defect Reference page Sound does not come out. The signal cables are not correctly connected. Correctly connect the audio cables. 12,13 The MUTE function is working. Restore the sound pressing the MUTE or VOLUME button on the ...

  • Dukane 8065 - page 54

    5 2 Pheno mena th at may be easy to be mistaken for ma chine d efects (cont inued) Phenomenon Cases not involving a machine defect Reference page Pictures appear dark. The brightness and/or contrast are adjusted to an extremely low level. Adjust BRIGHTNESS and/or CONTRAST settings to a higher level using the menu function. 25 The WHISPER function i ...

  • Dukane 8065 - page 55

    5 3 Warr anty And After-Ser vice W arranty and after-service If a problem occurs with the equipment, first refer to the “T roubleshooting” and run through the suggested checks. If this does not resolve the problem, please contact your dealer or service company . They will tell you what warranty condition is applied. Specifications Specificat ...

  • Dukane 8065 - page 56

    5 4 Specifications Specifications (continued) Y R L AUDIO IN2 AUDIO OUT CONTROL RGB IN1 RGB IN 2 US B RGB OU T AUDIO IN1 VIDEO S-VIDEO C B / P B C R / P R K 306 mm 249 mm 100 mm 86 mm ...

  • Dukane 8065 - page 57

    5 5 Projector 8755D-RJ onl y Network Functions This section is only intended to explain Network Functions. Contents Network Functions ............................................................... 59 Settings ................................................................................ 64 Projector Contr ol ..................................... ...

  • Dukane 8065 - page 58

    5 6 NETWORK Menu  MENU [RGB]  IMAGE  SETUP  PICTURE  INPUT  OPTION  EASY MENU  SCREEN :SELECT  NETWORK   IP ADDRESS   SUBNET MASK   DATE AND TIME   DHCP   TURN OFF  DEFAULT GATEWAY  TIME DIFFERENCE  e‑SHOT   INFORMATION Multifunctional settings Item Operation DHCP (Dynamic Host Configuration ...

  • Dukane 8065 - page 59

    5 7 Multifunctional settings Item Operation DEF AUL T GA TEW A Y Entering the DEF AUL T GA TEW A Y : Use the ▲/▼/◄/► buttons to en ter the DEF AUL T GA TEW A Y (therouter or PC that forwardstraffic to a destination outside of the subnet of the transmitting device) address.This function can only be used when DHCP is set to “TURN OFF”. D ...

  • Dukane 8065 - page 60

    5 8 Multifunctional settings Item Operation INFORMA TION INFORMA TION display : Use the ► or ENTER buttons to view network information and confirm settings. ~Note~ • Only the first 16 characters of the projector name are displayed. • The battery for the built in clock may be dead if the clock loses time even when the DA TE AND TIME have bee ...

  • Dukane 8065 - page 61

    59 Network Functions Network Functions Configuring and Controlling the Pr ojector via a W eb Browser Y ou can change the settings of or control the projector via a network by using a web browser from a PC that is connected to the same network. (  4 ) F ailur e & War ning Aler ts via E-mail The projector can automatically send an alert to sp ...

  • Dukane 8065 - page 62

    60 Network Functions Notes: ...

  • Dukane 8065 - page 63

    6 1 Network Functions Before using the network functions… T o use the network functions of this projector , the projector must be configured to suit your network. Consult with your network administrator before connecting the projector to your network. Incorrect network configuration of this projector may cause problems on your network. Connect ...

  • Dukane 8065 - page 64

    62 Configuring and controlling the projector via a web browser ...

  • Dukane 8065 - page 65

    63 Network Functions When configuring or controlling the projector via a web browser , an ID and password are required. There are two types of IDs, Administrator IDs and User IDs. The following chart describes the dif ferences between user and administrator IDs. Below are the factory default settings for administrator IDs, user IDs and passwords. ...

  • Dukane 8065 - page 66

    64 Settings Settings Refer to the follo wing for configuring or control ling the projector via a web br owser . Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter [https://192.168.1.10] into the address bar of the web browser and the screen in Fig. 1 will be displayed. 2) Enter your ID and password and click [Logon] . If ...

  • Dukane 8065 - page 67

    65 Settings Network Infor ma tion All screen images displayed in this manual are screens of a logon using an administrator ID. Any administrator only functions will not be displayed when using a user ID. Refer to the descriptions in each table. Displays the projector ’s current network configuration settings. Item Description DHCP Displays the D ...

  • Dukane 8065 - page 68

    6 6 Settings Network Settings Displays and configures network settings. Click the [Apply] button to save the settings. • The new configuration settings are activated after restarting the network connection. When the configuration settings are changed, you must restart the network connection. Y ou can restart the network connection by clicking ...

  • Dukane 8065 - page 69

    6 7 Settings P or t Settings Displays and configures communication port settings. Click the [Apply] button to save the settings. • The new configuration settings are activated after restarting the network connection. The network connection must be restarted when the configuration settings are changed. The network connection can be restarted us ...

  • Dukane 8065 - page 70

    6 8 Settings Mail Settings Displays and configures e-mail addressing settings. Click the [Apply] button to save the settings. • Y ou can confirm whether the mail settings work correctly using the [Send T est Mail] button. • If you connect the projector to an existing network, consult a network administrator before setting server addresses. NO ...

  • Dukane 8065 - page 71

    6 9 Settings Aler t Settings Displays and configures failure & warning alerts. Item Description Cover Error Configures Cover Error alert settings. SNMP T rap Click the [Enable] check box to enable SNMP T rap alerts for this item. Send Mail Click the [Enable] check box to enable e-mail alerts for this item. Mail Subject Configures the subject ...

  • Dukane 8065 - page 72

    70 Settings Alert Settings (Continued) Item Description Lamp Error Configures Lamp Error alert settings. SNMP T rap Click the [Enable] check box to enable SNMP T rap alerts for this item. Send Mail Click the [Enable] check box to enable e-mail alerts for this item. Mail Subject Configures the subject line of the e-mail to be sent. The length of t ...

  • Dukane 8065 - page 73

    71 Settings Alert Settings (Continued) Item Description Lamp Time Error Configures Lamp T ime Error alert settings. SNMP T rap Click the [Enable] check box to enable SNMP T rap alerts for this item. Send Mail Click the [Enable] check box to enable e-mail alerts for this item. Mail Subject Configures the subject line of the e-mail to be sent. The ...

  • Dukane 8065 - page 74

    72 Settings Alert Settings (Continued) Item Description Other Error Configures Other Error alert settings. SNMP T rap Click the [Enable] check box to enable SNMP T rap alerts for this item. Send Mail Click the [Enable] check box to enable e-mail alerts for this item. Mail Subject Configures the subject line of the e-mail to be sent. The length of ...

  • Dukane 8065 - page 75

    73 Settings Alert Settings (Continued) Item Description Filter Time Alarm Configures Filter T ime Alarm alert settings. SNMP T rap Click the [Enable] check box to enable SNMP T rap alerts for this item. Send Mail Click the [Enable] check box to enable e-mail alerts for this item. Mail Subject Configures the subject line of the e-mail to be sent. ...

  • Dukane 8065 - page 76

    74 Settings Schedule Settings Displays and configures schedule settings. Item Description Daily Configures the daily schedule. Schedule Click the [Enable] check box to enable daily scheduling. Schedule List Displays the current daily schedule. Sunday Configures the Sunday schedule. Schedule Click the [Enable] check box to enable Sunday schedulin ...

  • Dukane 8065 - page 77

    75 Settings Schedule Setting (Continued) Item Description Specific date No1 Configures the specific date (No.1) schedule. Schedule Click the [Enable] check box to enable specific date (No.1) scheduling. Month/Day Configures the Month and date. Schedule List Displays the current specific date (No.1) schedule. Specific date No.2 Configures th ...

  • Dukane 8065 - page 78

    7 6 Settings T o add additional functions and events click the [Add] button and set the following items. Item Description Time Configures the time to execute commands. Command Configures the commands to be executed. Power Parameter Configures the parameters for power control. Input Source Parameter Configures the parameters for input switching. ...

  • Dukane 8065 - page 79

    7 7 Settings Date/Time Settings (Continued) Click the [Apply] button to save the settings. Item Description Daylight Savings Time Click the [ON] check box to enable daylight savings time and set the following items. SNTP Server IP Ad dress Configures the SNTP server address in IP format. Cycle Configures the interval at which to retrieve Date and ...

  • Dukane 8065 - page 80

    7 8 Settings Security Settings Item Description Administrator authority Configures the Administrator ID and Password. Administrator ID Configures the Administrator ID. The length of the text can be up to 32 alphanumeric characters. Administrator Password Configures the Administrator Password. The length of the text can be up to 255 alphanumeric ...

  • Dukane 8065 - page 81

    7 9 Projector Contr ol Projector Control Projector Contr ol The items shown in the table below can be performed using the [Projector Control] menu. Select an item using the up and down arrow keys on the PC. Most of the items have a submenu. Refer to the table below for details. Controls the projector . Item Description Main Power T urns the power O ...

  • Dukane 8065 - page 82

    80 Projector Contr ol Projector Control (Continued) Item Description Image Aspect Selects the Aspect setting. Over Scan Selects the Over Scan setting. V Position Adjusts the V Position. H Position Adjusts the H Position. H Phase Adjusts the H Phase. H Size Adjusts the H Size. Auto Adjust Performs Auto Adjustment. Input Color Space Selects the Color ...

  • Dukane 8065 - page 83

    81 Auto Search T urns the Automatic signal search function On/Off. Auto Power off Configures the timer to shut off the projector when no signal is detected. Auto Adjust Enable Enables/Disables Auto Adjustment. Projector Contr ol Projector Status Displays and configures the current projector status. Item Description Error Status Displays the curre ...

  • Dukane 8065 - page 84

    82 Projector Contr ol Network Restar t Restarts the projector ’s network connection. Item Description Restart Restarts the projector ’s network connection in order to activate new configuration settings. • Restarting requires you to re-log on in order to further control or configure the projector via a web browser . NO TE Logof f When logof ...

  • Dukane 8065 - page 85

    83 Failure & Warning Aler ts via E-mail Failure & W arning Alerts via E-mail The projector can automatically send an alert to specified e-mail addresses when the projector requires maintenance or has encountered an error . • Up to five e-mail addresses can be specified. • The projector may be not able to send e-mail if the projector ...

  • Dukane 8065 - page 86

    84 Failure & Warning Aler ts via E-mail 8) Configure the Failure/W arning Alerts via E-mail settings. Click [Alert Settings] on the main menu. 9) Select and configure each alert item. Refer to [Alert Settings] in [Configuring and Controlling the Projector via a Web Browser] for further information. 10) Click the [Apply] button to save the se ...

  • Dukane 8065 - page 87

    85 Projector mana gement via SNMP Projector management via SNMP When SNMP is enabled, the projector is able to send Failure/W arning Alerts to a specified PC. • It is recommended that SNMP functions be carried out by a network administrator . • SNMP management software must be installed on the computer to monitor the projector via SNMP . NO TE ...

  • Dukane 8065 - page 88

    8 6 Controlling the Pr ojector via Scheduling Controlling the Projector via Scheduling The projector can be automatically controlled via scheduling. • Y ou can schedule the following control events: Power ON/OFF , Input Source and T ransferred Image Display . • There are 3 types of Scheduling, 1) daily 2) day of the week 3) specific date. • ...

  • Dukane 8065 - page 89

    87 Controlling the Pr ojector via Scheduling Date/Time Settings The Date/T ime setting can be adjusted via a web browser . Example: If the IP address of the projector is set to 192.168.1.10: • A Network Restart is required after the Daylight Savings T ime or SNTP configuration settings have been changed. • The battery for the built in clock ma ...

  • Dukane 8065 - page 90

    88 Controlling the Pr ojector via Scheduling Schedule Settings Schedule settings can be configured from a web browser . Example: If the IP address of the projector is set to 192.168.1.10: (  16 ) There are three types of scheduling. 1) Daily: Perform the specified operation at a specified time every day . 2) Sunday ~ Saturday: Perform the spe ...

  • Dukane 8065 - page 91

    89 e-Shot (Still Image Transfer) Display e-Shot (Still Image T ransfer) Display The projector can display a still image that is transferred via the network. Communication P or t The following port is used for e-Shot. TCP #9716 (  9 ) e-Shot (Still Image T r ansfer) Settings Configure the following items from a web browser when e-Shot is used. E ...

  • Dukane 8065 - page 92

    90 e-Shot (Still Image Transfer) Display e-Shot (Still Image Transfer) Settings (Continued) When the authentication setting is enabled, the following settings are required. 6) Click [Security Settings] on the main menu. 7) Select [Network Control] and enter the desired authentication password. * see Note1 8) Click the [Apply] button to save the set ...

  • Dukane 8065 - page 93

    91 Command Control via the Networ k Command Control via the Network Y ou can configure and control the projector via the network using RS-232C commands. Communication P or t The following two ports are assigned for the command control. TCP #23 TCP #9715 Command Control Settings Configure the following items from a web browser when command control ...

  • Dukane 8065 - page 94

    92 Command Control via the Networ k Command Control Settings (Continued) When the authentication setting is enabled, the following settings are required. (  20 ) 7) Click [Security Settings] on the main menu. 8) Click [Network Control] and enter the desired authentication password. * See Note1. 9) Click the [Apply] button to save the settings. * ...

  • Dukane 8065 - page 95

    93 Command Control via the Networ k Command for mat Command formats differ among the dif ferent communication ports. TCP #23 Y ou can use the RS-232C commands without any changes. The reply data format is the same as the RS-232C commands. However , the following reply will be sent back in the event of authentication failure when authentication is e ...

  • Dukane 8065 - page 96

    94 Command Control via the Networ k R epl y Data f or ma t The connection ID (the data is same as the connection ID data on the sending data format) is attached to the RS-232C commands reply data. <ACK reply> Reply Connection ID 0x06 1 byte <NAK reply> Reply Connection ID 0x15 1 byte <Error reply> Reply Error code Connection ID 0x ...

  • Dukane 8065 - page 97

    Command Control via the Networ k Automa tic Connection Br eak The TCP connection will be automatically disconnected after there is no communication for 30 seconds after being established. Authentication The projector does not accept commands without authentication success when authentication is enabled. The projector uses a challenge response type ...

  • Dukane 8065 - page 98

    9 6 Notes: ...

  • Dukane 8065 - page 99

    1 Projector CP-S24/ , 8755D-RJ, & 8065 User's Manual – Oper a ting Guide T ec hnical Example of computer signal Resolution (H x V) H. frequency (kHz) V . frequency (Hz) Rating Signal mode 720 x 400 37.9 85.0 VESA TEXT 640 x 480 31.5 59.9 VESA VGA (60Hz) 640 x 480 37.9 72.8 VESA VGA (72Hz) 640 x 480 37.5 75.0 VESA VGA (75Hz) 640 x 480 43. ...

  • Dukane 8065 - page 100

    9 8 Example of computer signal Initial set signals The following signals are used for the initial settings. The signal timing of some computer models may be different. In such case, adjust the items V POSITION and H POSITION in the IMAGE menu. Back porch (B) Front porch (D) Back porch (b) Front porch (d) Di sp lay i nt erv al (C ) D isp la y int er ...

  • Dukane 8065 - page 101

    9 9 Connection to the ports A RGB IN1, B RGB IN2, RGB OUT D-sub 15pin mini shrink jack • Video signal: RGB separate, Analog, 0.7Vp-p, 75Ω terminated (positive) • H/V . sync. Signal: TTL level (positive/negative) • Composite sync. Signal: TTL level At RGB signal At component video signal Pin Signal 1 Video Red 2 Video Green 3 Video Blue 4 (No ...

  • Dukane 8065 - page 102

    100 Connection to the por ts 4 3 2 1 G VIDEO RCA jack • System: NTSC, P AL, SECAM, P AL-M, P AL-N, NTSC4.43, P AL60 • 1.0±0.1Vp-p, 75Ω terminator F S-VIDEO Mini DIN 4pin jack Pin Signal 1 Color signal 0.286Vp-p (NTSC, burst), 75Ω terminator Color signal 0.300Vp-p (P AL/SECAM, burst) 75Ω terminator 2 Brightness signal, 1.0Vp-p, 75Ω terminat ...

  • Dukane 8065 - page 103

    101 Connection to the por ts Y R L AUDIO IN 2 AUDIO OU T CONTROL RGB IN 1 RGB IN 2 USB RGB OU T AUDIO IN 1 VIDE O S-VIDEO C B / P B C R / P R K H M H AUDIO 1-IN ( Ø3.5 stereo mini jack), I J AUDIO 2 L/R (RCA jack) • 200mV rms(max.) 35kΩ termination K AUDIO OUT ( Ø3.5 stereo mini jack) • 200mV rms(max.) 1k Ω output impedance L USB USB B type ...

  • Dukane 8065 - page 104

    102 RS-232C Communication RS-232C Communication 6 7 8 9 1 2 3 4 5 6 7 8 9 1 2 3 4 5 CONTROL port RS-232C cable (Cross) RS-232C port of the projector of the computer - (1) (1) CD RD (2) (2) RD TD (3) (3) TD - (4) (4) DTR GND (5) (5) GND - (6) (6) DSR RTS (7) (7) RTS CTS (8) (8) DTS - (9) (9) RI Connecting the cable 1. T urn off the projector and the ...

  • Dukane 8065 - page 105

    103 RS-232C Communication (continued) Requesting projector status (Get command) (1) Send the request code Header + Command data (‘02H’+‘00H’+ type (2 bytes)+ ‘00H’ +‘00H’) from the computer to the projector . (2) The projector returns the response code ‘1DH’ + data (2 bytes) to t he computer . Changing the projector settings (Se ...

  • Dukane 8065 - page 106

    104 Names Operation Type Header Command Data CRC Action Type Setting Code Power Set Turn off BE EF 03 06 00 2A D3 01 00 00 60 00 00 Turn on BE EF 03 06 00 BA D2 01 00 00 60 01 00 Get BE EF 03 06 00 19 D3 02 00 00 60 00 00 (Example return) 00 00 01 00 02 00 (Off) (On) (Cool down) RGB2 Status Get BE EF 03 06 00 F1 D8 02 00 21 20 00 00 00 00 01 00 (RG ...

  • Dukane 8065 - page 107

    105 Names Operation Type Header Command Data CRC Action Type Setting Code User Gamma Pattern Set Off BE EF 03 06 00 FB F A 01 00 80 30 00 00 9 step gray scale BE EF 03 06 00 6B FB 01 00 80 30 01 00 15 steps gray scale BE EF 03 06 00 9B FB 01 00 80 30 02 00 Ramp BE EF 03 06 00 0B F A 01 00 80 30 03 00 Get BE EF 03 06 00 C8 FA 02 00 80 30 00 00 User ...

  • Dukane 8065 - page 108

    106 Names Operation Type Header Command Data CRC Action Type Setting Code COLOR TEMP GAIN G Get BE EF 03 06 00 70 F4 02 00 B2 30 00 00 Increment BE EF 03 06 00 16 F4 04 00 B2 30 00 00 Decrement BE EF 03 06 00 C7 F5 05 00 B2 30 00 00 COLOR TEMP GAIN B Get BE EF 03 06 00 8C F5 02 00 B3 30 00 00 Increment BE EF 03 06 00 EA F5 04 00 B3 30 00 00 Decreme ...

  • Dukane 8065 - page 109

    1 0 7 Names Operation Type Header Command Data CRC Action Type Setting Code ASPECT Set 4:3 BE EF 03 06 00 9E D0 01 00 08 20 00 00 16:9 BE EF 03 06 00 0E D1 01 00 08 20 01 00 SMALL BE EF 03 06 00 FE D1 01 00 08 20 02 00 NORMAL BE EF 03 06 00 5E DD 01 00 08 20 10 00 Get BE EF 03 06 00 AD D0 02 00 08 20 00 00 OVER SCAN Get BE EF 03 06 00 91 70 02 00 0 ...

  • Dukane 8065 - page 110

    1 0 8 Names Operation Type Header Command Data CRC Action Type Setting Code KEYSTONE V Get BE EF 03 06 00 B9 D3 02 00 07 20 00 00 Increment BE EF 03 06 00 DF D3 04 00 07 20 00 00 Decrement BE EF 03 06 00 0E D2 05 00 07 20 00 00 KEYSTONE V Reset Execute BE EF 03 06 00 08 D0 06 00 0C 70 00 00 WHISPER Set NORMAL BE EF 03 06 00 3B 23 01 00 00 33 00 00 ...

  • Dukane 8065 - page 111

    1 0 9 Names Operation Type Header Command Data CRC Action Type Setting Code MUTE Set TURN OFF BE EF 03 06 00 46 D3 01 00 02 20 00 00 TURN ON BE EF 03 06 00 D6 D2 01 00 02 20 01 00 Get BE EF 03 06 00 75 D3 02 00 02 20 00 00 LANGUAGE Set ENGLISH BE EF 03 06 00 F7 D3 01 00 05 30 00 00 FRANÇAIS BE EF 03 06 00 67 D2 01 00 05 30 01 00 DEUTSCH BE EF 03 0 ...

  • Dukane 8065 - page 112

    1 10 Names Operation Type Header Command Data CRC Action Type Setting Code OSD BRIGHT . Get BE EF 03 06 00 A8 D5 02 00 18 30 00 00 Increment BE EF 03 06 00 CE D5 04 00 18 30 00 00 Decrement BE EF 03 06 00 1F D4 05 00 18 30 00 00 BLANK Set My Screen BE EF 03 06 00 FB CA 01 00 00 30 20 00 ORIGINAL BE EF 03 06 00 FB E2 01 00 00 30 40 00 BLUE BE EF 03 ...

  • Dukane 8065 - page 113

    ...

  • Dukane 8065 - page 114

    2900 Dukane Drive St. Charles, Illinois 60174 www .dukcorp.com/av T oll-fr ee: 800-676-2487 Fax: 630-584-5156 e-mail: avsales@dukcorp.com Audio Visual Products #401-8755D-0 1 ...

Manufacturer Dukane Category Projector

Documents that we receive from a manufacturer of a Dukane 8065 can be divided into several groups. They are, among others:
- Dukane technical drawings
- 8065 manuals
- Dukane product data sheets
- information booklets
- or energy labels Dukane 8065
All of them are important, but the most important information from the point of view of use of the device are in the user manual Dukane 8065.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Dukane 8065, service manual, brief instructions and user manuals Dukane 8065. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Dukane 8065.

Similar manuals

A complete manual for the device Dukane 8065, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Dukane 8065 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Dukane 8065.

A complete Dukane manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Dukane 8065 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Dukane 8065, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Dukane 8065, that we can find in the current document
3. Tips how to use the basic functions of the device Dukane 8065 - which should help us in our first steps of using Dukane 8065
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Dukane 8065
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Dukane 8065 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Dukane 8065?

Use the form below

If you did not solve your problem by using a manual Dukane 8065, ask a question using the form below. If a user had a similar problem with Dukane 8065 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)