-
Ericsson RX8000 - page 1
RX8000 Series Receivers Software Version 4.3.2 REFERENCE GUIDE EN/LZT 790 0005 R1A ...
-
Ericsson RX8000 - page 2
RX8000 Series Receivers ENGLISH (UK) - READ THIS FIR ST! If you do not under stand the co ntents of this man ual. DO NOT OPERATE THIS EQUIPMENT . Also , translation into any EC official language of thi s manual can be made av ailable, at your cost. ITALIANO - LEGGERE QUESTO AVVISO PER PRIMO! Se non si capisce il contenuto del pre sente manuale. NON ...
-
Ericsson RX8000 - page 3
Contents EN/LZT 790 0005 R1A 2011-03- 30 iii Contents Chapter 1: Introduction This chapter identifies the equipment versions covered by this manual, describes the purpose of the equipment and provides a summary of features, controls and indicators. Chapter 2: Installing the Equipment This chapter provides a guide to the installation r equirements, ...
-
Ericsson RX8000 - page 4
Preliminary Pages Introduction This Reference Guide provides instructions and information for the installation and operation of the RX8000 Receiver range. This Reference Guide should be kept in a safe place for reference for t he life of the equipment. It is not intended that this Reference Guide will be amended by the issue of individual pages. An ...
-
Ericsson RX8000 - page 5
Preliminary Pages Registered trademarks and trademarks used are acknowledged below and marked with their respective symbols. However, t hey are not marked within the text of this Reference Guide. Registered Trademarks Ethernet ® Registered trademark of Xerox Corporation. Dolby ® / AC-3 ® Registered trademarks of Dolby Laboratories Licensing Corp ...
-
Ericsson RX8000 - page 6
Preliminary Pages Warning! Warnings give information which, if strict ly observed, will prevent personal injury or death, or damage to property or the environment. They are highlighted for emphasis, as in this example, and are placed immediately preceding the point at which the reader requires them. Caution! Cautions give information which, if stri ...
-
Ericsson RX8000 - page 7
Preliminary Pages For systems support you can choose either Gold Business Critical support or Silver Business Advantage . These packages are designed to save you costs and protect your income through enlisting the help of Ericsson support specialists. Call Ericsson Customer Services for more details. Customer Services Europe, Middle East and Africa ...
-
Ericsson RX8000 - page 8
Preliminary Pages EN/LZT 790 0005 R1A 2011-03- 30 viii Return of Equipment If you need to return equipment for repair please contact your local Ericsson Customer Services Department. Please refer to the Customer Services contact information on page vii. You will then be directed to return the faulty equipment to a repair centre with the appropriate ...
-
Ericsson RX8000 - page 9
1 Introduction Chapter 1 Contents 1.1 Introduction ........................................................................................... 1-3 1.1.1 Who Should Use this Reference Guide ................................................ 1-3 1.1.2 What Equipment is Covered by this Reference Guide ......................... 1-3 1.2 Summary of Feature ...
-
Ericsson RX8000 - page 10
Chapter 1 EN/LZT 790 0005 R1A 1-2 List of Figures Figure 1.1 Typical Satellite Compression System ............................................... 1-17 Figure 1.2 What the Satellite Receiver Does....................................................... 1-18 Figure 1.3 Typical Compression System ......................................................... ...
-
Ericsson RX8000 - page 11
Chapter 1 1.1 Introduction 1.1.1 Who Should Use this Reference Guide This Reference Guide is written for operators / users of the RX8000 Series Receivers. It describes the units’ functions and operation. The Reference Guide is written to assist in the installation and day-to-day care and op eration of the unit. Maintenance information requiring t ...
-
Ericsson RX8000 - page 12
Chapter 1 This Reference Guide covers the functions of software version 4.3.2 and later . To verify the installed version either: • Access the front panel System Menu (Menu 1.2.1). The front panel menus are described in Chapter 3, Front Panel Control. • Access the Web Browser screens and select the About button. The Web Browser screens are desc ...
-
Ericsson RX8000 - page 13
Chapter 1 T able 1.3 RX8200 Software Options Marketing Code Price Object Number Supply Object Number Description RX8200/SWO/DVBS2/QPSK FAZ 101 0113/32 FAT 102 0151 DVB-S2 QPSK License key RX8200/SWO/DVBS2/8PSK FAZ 101 0113/30 FAT 102 0152 DVB-S2 8PSK License key RX8200/SWO/DVBS2/LSYM FAZ 101 0113/31 FAT 102 0153 DVB-S2 Low Symbol Rate Lice nse Key ...
-
Ericsson RX8000 - page 14
Chapter 1 Marketing Code Price Object Number Supply Object Number Description RX8200/SWO/HDSDI/3G FAZ 101 0113/34 FAT 102 0176 MPEG-4 HD 4:2:2 1080p 50/60 Decoding RX8200/SWO/MP2/422/SD FAZ 101 0113/59 FAT 102 0387 MPEG-2 SD 4:2:2 Decodi ng RX8200/SWO/MP2/HD/ 422 FAZ 101 0113/39 FAT 102 0172 MPEG-2 HD and SD 4:2:2 Decode RX8200/SWO/MP4/422/SD FAZ 1 ...
-
Ericsson RX8000 - page 15
Chapter 1 Marketing Code Price Object Number Supply Object Number Description RX83XX/SWO/PW FAZ 101 0108/29 FAT 102 0110 Passwo rd Protection for Web Browser RX83XX/SWO/AAC FAZ 101 0108/2 FAT 102 0370 AAC De code RX83XX/SWO/SING/SERVFILT FAZ 101 0108/15 FAT 102 0138 Single Service Filtering RX83XX/SWO/MULT/SERVFILT FAZ 101 0108/14 FAT 102 0137 Mult ...
-
Ericsson RX8000 - page 16
Chapter 1 Marketing Code Price Object Number Supply Object Number Description RX83XX/SWO/SING/SERVFILT FAZ 101 0108/15 FAT 102 0138 Single Service Filtering RX83XX/SWO/MULT/SERVFILT FAZ 101 0108/14 FAT 102 0137 Multi-Service Filtering RX83XX/SWO/IP/DATA FAZ 101 0108/7 FAT 102 0113 High Speed Data Output RX83XX/SWO/MP2/MP4/SD FAZ 101 0108/12 FAT 102 ...
-
Ericsson RX8000 - page 17
Chapter 1 Marketing Code Price Object Number Supply Object Number Description RX83XX/SWO/NULL FAZ 101 0108/17 FAT 102 0114 Null Packet TS License RX8320/SWO/IP/OUT FAZ 101 0108/25 FAT 102 0134 IP Transport Stream Out License Key RX8320/UPG/IP/OUT FAZ 101 0108/26 FAT 102 0135 IP Transport Stream Output T able 1.10 RX8330 Hardware Options Marketing C ...
-
Ericsson RX8000 - page 18
Chapter 1 Marketing Code Price Object Number Supply Object Number Description RX83XX/SWO/MP2/MP4/SD FAZ 101 0108/12 FAT 102 0111 MPEG-2/4 SD 4:2:0 Decoding RX83XX/SWO/MP2/MP4/ SD/HD FAZ 101 0108/11 FAT 102 0112 MPEG-2/4 HD 4:2:0 Decoding RX83XX/SWO/NULL FAZ 101 0108/17 FAT 102 0114 Null Packet TS License RX83XX/SWO/MSD FAZ 101 0108/13 FAT 102 0125 ...
-
Ericsson RX8000 - page 19
Chapter 1 • Status LED indicates input feed lock and general alarm conditions. • Alarm handling via single configurable alarm relay and a date and time stamped alarm log. • 1 x ASI input with 75 Ω connector. • 2 x ASI Transport Stream outputs with 75 Ω connectors. • Simple local and remote unit software upgrade in the field. • Service ...
-
Ericsson RX8000 - page 20
Chapter 1 • Dolby Digital ® decoding / downmixing. • Director 5 control and de-scrambling. 1.2.2 RX8310 Distribut ion Receiver The RX8310 combines a DVB-S2 demodulator with Ericsson’s Director secure content delivery and over-air receiver control solution as a standard feature. The RX8310 provides the option to decrypt multiple services, all ...
-
Ericsson RX8000 - page 21
Chapter 1 • MPE IP data de-encapsulation. • Single service filtering and PID remapping. • Multi-service filtering and stream splitting. 1.2.3 RX8315 Distribut ion Receiver The RX8315 enables video distribution for both analog and digital networks. The RX8315 provides compatibility with DVB Common Interface CA systems, offering both single ser ...
-
Ericsson RX8000 - page 22
Chapter 1 • MPEG-4 AVC HD down-conversion through CVBS output. • 2 x stereo pair Dolby® Digital audio decoding with 5.1 to 2.0 down-mixing. • AAC audio decoding with 5.1 to 2.0 down-mixing. • MPE IP data de-encapsulation. • Single service filtering and PID remapping. • Multi-service filtering and stream splitting. 1.2.4 RX8320 ATSC Bro ...
-
Ericsson RX8000 - page 23
Chapter 1 • 2 x stereo pairs balanced analog audio output. • Front panel and web browser control, with alarm relay. 1.2.4.2 RX8320 Factory Fit Optional Hardware Features • Dual Gigabit IP data / feed output on dual redundant RJ-45 output connectors. 1.2.4.3 RX8320 Optional Software Features The following optional features are available: • T ...
-
Ericsson RX8000 - page 24
Chapter 1 • Front panel and Web browser control, with alarm relay. • SCTE 35 controlled contact closures for ad-insertion signaling. 1.2.5.2 RX8330 Factory Fit Optional Hardware Features • Dual Gigabit IP data / feed output on dual redundant RJ-45 output connectors. • Russian SECAM compo site video output. 1.2.5.3 RX8330 Optional Software F ...
-
Ericsson RX8000 - page 25
Chapter 1 1.3 The Satellite Receiver 1.3.1 Typical Satellite System The RX8000 Series Receiver is a component of the MPEG-4 AVC/ MPEG-2/DVB compliant range of Ericsson equipment. They are designed for use by broadcasters and distributors of video, audio and data Services over satellite. Figure 1.1 Typical Satellite Compression System 1.3.2 Input Co ...
-
Ericsson RX8000 - page 26
Chapter 1 1.3.3 What the Satellite Receiver Does The Receiver can be tuned to a specified satellite channel fr equency and polarization. The input is down-converted via a Low-Noise Block (LNB) to provide an L-band input to the Receiver. The front-end tuning is microprocessor controlled with a frequency synthesized local oscillator. A software tunin ...
-
Ericsson RX8000 - page 27
Chapter 1 1.4 The T elco Receiver/Decoder 1.4.1 Typical Decoder System The Decoder is a component of Ericsson range of equipment. It is designed for use by broadcasters and distributors of video and audio Services. It can be used as a Transport Stream monitor or to decode si gnals received over a telecommunications network. Figure 1.3 Typical Compr ...
-
Ericsson RX8000 - page 28
Chapter 1 The Decoder is configured to select a single video Service and other audio/data components from the multiple Services on the incoming Transport Stream and present them at the output. Figure 1.4 Role of the Decoder Note: G.703 input may also be used to interface to telco infrastructure. 1.5 Construction The RX8000 Receiver is constructed u ...
-
Ericsson RX8000 - page 29
Chapter 1 EDIT SAV E DOW N RI GHT LE FT U P LCD USB Co nn ecto r ( Se rv ic i ng Onl y ) S tat us LE D CA SLO T Figure 1.5 Front Panel Controls (RX8200) Table 1.12 Front Panel Controls Item Color Description CA Slot - Conditional Access Slot. Located on front panel of RX8200 and rear panel of RX831 0, RX8315 and RX8330. USB Connector - This connect ...
-
Ericsson RX8000 - page 30
Chapter 1 1.7 Rear Panels All inputs, outputs and control connections are taken via the rear panel. Due to the modular nature of these units, factory fitted hardware modules with different connections can be fitted to any unit and therefore only a typical (sample) rear panel images are shown below. Full details of the connectors for ALL base models ...
-
Ericsson RX8000 - page 31
Chapter 1 Table 1.13 Rear Panels Item Type Description RF IN 1-4 F-type 75 Ω Radio Freque ncy (L-band) input. ASI OUT 1-2 ASI/SDI OUT ASI/HD-SDI/SD-SDI OUT BNC 75 Ω ASI = Asynchronous Serial Interface. SDI = Synchronous Data Interface. SD-SDI = Standard Definition SDI. HS- SDI = High Definition SDI. CVBS BNC 75 Ω Composite Video output. ASI INPU ...
-
Ericsson RX8000 - page 32
Chapter 1 EN/LZT 790 0005 R1A 1-24 BLANK ...
-
Ericsson RX8000 - page 33
2 Inst alling the Equipment Chapter 2 Contents 2.1 Read This First! .................................................................................... 2-3 2.1.1 Handling ............................................................................................... 2-3 2.1.2 Installing the Equipment ............................................... ...
-
Ericsson RX8000 - page 34
Chapter 2 EN/LZT 790 0005 R1A 2-2 2.7.9 ASI IN Connector ............................................................................... 2-14 2.7.10 COMPONENT VIDEO Connector (RX8200 only) .............................. 2-14 2.7.11 DATA OUT Connector........................................................................ 2-15 2.7.12 ALARM Connector ...
-
Ericsson RX8000 - page 35
Chapter 2 2.1 Read This First! 2.1.1 Handling The equipment must be handled and installed carefully and thoughtfully to prevent safety hazards and damage. 2.1.2 Installing the Equipment Ensure the personnel designated to fit the unit have the appropriate skills and knowledge. If in any doubt, contact Ericsson Customer Services (see Prelim inary Pag ...
-
Ericsson RX8000 - page 36
Chapter 2 Where appropriate, ensure this product has an adequate level of lightning protection. Alternatively, during a lightning storm or when it is left unattended and unused for long periods of time, unplug it from the supply outlet and disconnect the output equipment. This prevents damage to the product due to lightning a nd power line surges. ...
-
Ericsson RX8000 - page 37
Chapter 2 2.3.2 Ventilation 2.3.2.1 Openings in the Covers Si de openings in the unit, as well as side-mount ed cooling fans, are pr ovided for ventilation. The y ensure reliable opera tion of the product and protect it fro m overheatin g. The openings of th e fans must no t be blocked or co vered. Figure 2.1 Air-Flow Through the Equipment Air is r ...
-
Ericsson RX8000 - page 38
Chapter 2 2.3.3 Installing Cables - Safety Power supply cables should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to cables at plugs, convenience receptacles, and the point where they exit from the appliance. Do not run AC power cables in the same duct as signal lea ...
-
Ericsson RX8000 - page 39
Chapter 2 Warnings! The RX8000 series receivers should only be oper ated from the type of power source indicated on the marking label. If you are not sure of the type to your business, consult your appliance dealer or local pow er company. Do not overload wall outlets and extension cords as this can result in a risk of fire or electric sho ck. The ...
-
Ericsson RX8000 - page 40
Chapter 2 T able 2.1 Supply Cord Wiring Colors UK (BS 1363) EUROPE (CEE 7/7) USA (NEMA 5-15P) Earth: Green-and-yellow Green-and-yellow Green Neutral: Blue Blue White Live: Brown Brown Black If the colors do not correspond with the colored markings identifying the terminals in a locally supplied plug, proceed as in Annex B. The inclusion of Table 2. ...
-
Ericsson RX8000 - page 41
Chapter 2 2. Eliminate the migration of stray charges when connecting between equipment. To do this, connect a wire between the Technical Earth terminal and a suitable point on the rack. The Technical Earth provides a suitable connection between the equipment and the installation to give a low impedance path at normal operating frequencies. Figure ...
-
Ericsson RX8000 - page 42
Chapter 2 All signal connections are made via the rear panel. A typical rear panel is shown in Figure 2.5 . Full technical specifications for the connections are given in Annex B . The Receiver provides a flexible Transport Stream input interface. The status information appropriate to each input type is available to the User via the User Interface, ...
-
Ericsson RX8000 - page 43
Chapter 2 Cautions! The receiver provides DC power (see Chapter 3, Front Panel Control for details of menu option) via the active L-band input connector to drive an LNB. Do not connect equipment other than an LNB to this connector. Failure to do this may result in damage to the external equipment. The F-type connector is not suitable for repeated c ...
-
Ericsson RX8000 - page 44
Chapter 2 2.7.4 ASI/SDI OUT Connector (RX8200 and RX8330 only) The unit provides two coaxial ASI/SDI outputs depending on the user selectable configuration. T able 2.5 ASI/SDI OUT Connector Item Specification Connector type BN C 75 Ω female s ocket Connector designation ASI OUT 1 ASI OUT 2 Pin-outs Centre Shield Output Ground/Chassis ASI/SDI OUT 2 ...
-
Ericsson RX8000 - page 45
Chapter 2 2.7.7 AUDIO/AUDIO OUT Connector All units provide a pair of connectors supplying two stereo channels. Each carries a single channel stereo pair in both analogue and balanced digital form. Table 2.8 AUDIO/AUDIO OUT Connectors AUDIO/AUDIO OUT Item Specification Connector type 9-way, D-type, male Connector designation s AUDIO OUT 1 AUDIO OUT ...
-
Ericsson RX8000 - page 46
Chapter 2 2.7.9 ASI IN Connector All units provide an ASI input socket for detection of the transport stream lock on the ASI input. Table 2.10 ASI IN Conn ector Item Specification Connector type BN C 75 Ω female s ocket Connector designation AS I IN Pin-outs Centre Shield Input Ground/Chassis ASI IN 2.7.10 COMPONENT VIDEO Connector (RX8200 only) T ...
-
Ericsson RX8000 - page 47
Chapter 2 2.7.11 DATA OUT Connector A data output interface may be used with either RS232 or RS422 connector, as described below. Table 2.12 DATA OUT Connector Item Specification Connector type 9- wa y, D- t ype , f e ma le Connector designation D A TA OU T Pin RS232 RS422 Pin-outs Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 Pin 7 Pin 8 Pin 9 NC TxD RxD NC ...
-
Ericsson RX8000 - page 48
Chapter 2 EN/LZT 790 0005 R1A 2-16 2.7.13 RS232/RS485 REMOTE Connector A remote control interface may be used with either RS232 or RS485 connector, as detailed below. Table 2.14 RS232/RS4 85 REMOTE Connector Item Specification Connector type 9- wa y, D- t ype , m a le Connector designation R S 23 2/R S4 85 REM OT E Pin RS232 RS485 Pin-outs Pin 1 Pi ...
-
Ericsson RX8000 - page 49
3 Front Panel Control Chapter 3 Contents 3.1 Introduction ........................................................................................... 3-3 3.2 Powering the Equipment ...................................................................... 3-3 3.2.1 Switching On ........................................................................... ...
-
Ericsson RX8000 - page 50
Chapter 3 EN/LZT 790 0005 R1A 3-2 3.5.7.1 4.1 Service Table ............................................................................... 3-52 3.5.7.2 4.2 Director ......................................................................................... 3-53 3.5.8 5 Output .......................................................................... ...
-
Ericsson RX8000 - page 51
Chapter 3 3.1 Introduction This chapter describes the features and opt ions provided by the Front Panel menus for controlling the RX8000 Series Receivers locally. 3.2 Powering the Equipment 3.2.1 Switching On Caution! This equipment should not be operated unless the cooling fans are working and there is free-air flow around the unit. 1. Connect all ...
-
Ericsson RX8000 - page 52
Chapter 3 Figure 3.1 Power Up Operating Mode 3.3 Using the Front Panel Controls The user interface for the Front Panel consists of an alphanumeric Liquid Crystal Display, pushbuttons, and a status LED that are used to set-up, control and monitor the unit. Various menu screens can be navigated on the LCD using the pushbuttons, which allow you to sel ...
-
Ericsson RX8000 - page 53
Chapter 3 EDIT SAV E DOW N RI GHT LE FT U P LCD USB Co nn ecto r ( Se rv ic i ng Onl y ) S tat us LE D CA SLO T Figure 3.2 Front Panel Controls (RX8200) 3.3.1 USB Connector This connector is for factory / service use only. 3.3.2 Status LED This multi-coloured LED provides a visual indication of the summary status of the unit. The LED can be any one ...
-
Ericsson RX8000 - page 54
Chapter 3 3. Service : This menu includes user settings for the currently selected service for decode from the incoming feed. 4. CA Systems : This menu includes user settings for: the currently selecte d services for decryption from the incoming feed, Director parameters and status. 5. Output : This menu includes user settings for: Output selection ...
-
Ericsson RX8000 - page 55
Chapter 3 2. To ignore any changes that have been made and to return to the original setting, press the Edit pushbutton. 3.4 Example Configuration The following example configuration uses the Front Panel menus to set up the DVB-S2 Satellite Receiver (not available for RX8320) using Menu 2. T able 3.1 Setting Up the DVB-S2 Satellite Receiver Step Ac ...
-
Ericsson RX8000 - page 56
Chapter 3 3.5 Front Panel Menus An overview of the available Front Panel menus is shown in Figure 3.3 . The menus and settings available will vary depending on which receiver model is being used and which options have been enabled through the purchase of a suitable license. Boot Screen — 1.1.1 IP1 — 1.1.2 MA C1 — 1.1.3 IP2 — 1.1.4 MA C2 — ...
-
Ericsson RX8000 - page 57
Chapter 3 — 2.2.1 St atus 2.2.1.1 Lock Statu s 2.2.1.2 Error Rati o/ S ignal Level 2.2.1.3 Modulation/ F E C Rate 2.2.1.4 Standard/Spectral Sense 2.2.1.5 Pilot Symbol s /Frame Size — 2.2.2 Sour ce 1 Conf igur e 2.2.2.1 LNB Lo Freque ncy 2.2. 2.2 Satell ite Fr equency 2.2.2.3 Symbol Rate 2.2.2.4 Modulation 2.2.2.5 Rolloff 2.2.2.6 Spectru m Sens ...
-
Ericsson RX8000 - page 58
Chapter 3 3.5.1 1 System Shortly after switch-on, the Status LED will turn green and arrow keys will be lit depending on which further menus are available. The following System menu screen is displayed: SYSTEM |SYSTEM 1 | > The functions within the System menu are used to set various network parameters, IP and MAC addresses and to view Build, Un ...
-
Ericsson RX8000 - page 59
Chapter 3 4. Press Save to save the new settings or Edit to abandon the operation and return to the current setting. 3.5.1.1.2 1.1.2 MAC1 To access the MAC1 menu, press the T (Down) key. The following screen is displayed: MAC1 |MAC#1 1.1.2 |00:20 :AA:55:05:9C To edit the MAC1 address: 1. Press the Edit key. The cursor appears below the first charac ...
-
Ericsson RX8000 - page 60
Chapter 3 To edit the Gateway address: 1. Press the Edit key. The cursor appears below the first character of the Gateway address. 2. Edit the address as required using the W (Back) and X (Forward) key s to select each digit in turn, and then using the S (Up) and T (Down) keys to increment or decrement the digit. 3. Press Save to save the new setti ...
-
Ericsson RX8000 - page 61
Chapter 3 3.5.1.2.3 1.2.3 SD FPGA Ve rsion To view the Standard Definition (SD) Field Programmable Gate Array (FPGA) version, press the T (Down) key. The following screen (or a similar screen) is displayed: VERSIONS |SD FP GA VERSION 1.2.3 |0.2.5 [Bui lt: Thu Apr 8 16:25:22 2010] The bottom line scrolls to display the version details. 3.5.1.2.4 1.2 ...
-
Ericsson RX8000 - page 62
Chapter 3 3.5.1.2.8 1.2.8 422 FW (Option Card) To view the 4:2:2 Firmware (FW) version (dependent on model and option licences obtained), press the T (Down) key. The following screen is displayed: VERSIONS |422 FW :--- 1.2.8 | 3.5.1.2.9 1.2.9 422 SW (Option Card) To view the 4:2:2 Software (SW) version (dependent on model and option licenses obtain ...
-
Ericsson RX8000 - page 63
Chapter 3 3. Press Save to save the new settings or Edit to abandon the operation and return to the current setting. 4. If YES is saved, inputs will be reset and the unit rebooted immediately. 3.5.1.4.2 1.4.2 Reset All Incl IP & Reboot To access this function, press the T (Down) key. The following screen is displayed and the Edit key is lit: FA ...
-
Ericsson RX8000 - page 64
Chapter 3 2. Use the S (Up) and T (Down) keys to toggle between OFF and ON. 3. Press Save to save the new settings or Edit to abandon the operation and return to the current setting. To return to the System menu, press the W (Back) key twice. 3.5.2 2 Input (Satellite Input Card RX8200/HWO/DVBS2) The Input menu is used to select the various inputs t ...
-
Ericsson RX8000 - page 65
Chapter 3 3.5.2.2 2.2 Select Satellite Input This menu allows the choice of up to four RF Inputs. To access this menu, press the T (Down) key. The following screen is displayed: S2 |SELECT SAT ELLITE INPUT 2.2 |RF Input 01 > To select the relevant RF Input: 1. Press the Edit key. The cursor appears below the input number. 2. Use the S (Up) and T ...
-
Ericsson RX8000 - page 66
Chapter 3 3.5.2.2.1.4 2.2.1.4 Standard/Spectral Sense To view the status of these parameters, press the T (Down) key. The following screen is displayed: STATUS |STANDARD --- 2.2.1.4 |SPECTRAL SENSE --- 3.5.2.2.1.5 2.2.1.5 Pilot Sy mbols/Frame Size To view the status of these parameters, press the T (Down) key. The following screen is displayed: STA ...
-
Ericsson RX8000 - page 67
Chapter 3 SOURCE 1 |SATELLI TE FREQUENCY 2.2.2.2 |01550.000 MHz (UNLOCKED) To edit the frequency setting: 1. Press the Edit key. The cursor appears below the first number. 2. Edit the parameter value as required using the W (Back) and X (Forward) keys to select each digit in turn, and then using the S (Up) and T (Down) keys to increment or decremen ...
-
Ericsson RX8000 - page 68
Chapter 3 3.5.2.2.2.5 2.2.2.5 Rolloff To view and edit the current Source 1 Rolloff settings, press the T (Down) key. The following screen is displayed and the Edit key is lit: SOURCE 1 |ROLLOFF 2.2.2.5 |20% (UNLOCKED) To edit the Rolloff setting: 1. Press the Edit key. The cursor appears below the first character of the current setting. 2. Use the ...
-
Ericsson RX8000 - page 69
Chapter 3 3. Press Save to save the new settings or Edit to abandon the operation and return to the current setting. 3.5.2.2.2.8 2.2.2.8 LNB Power OP To view and edit the current Source 1 LNB power output settings, press the T (Down) key. The following screen is displayed and the Edit key is lit: SOURCE 1 |LNB POWER OP 2.2.2.8 |DISABLE (UNLOCKED) T ...
-
Ericsson RX8000 - page 70
Chapter 3 3. Press Save to save the new settings or Edit to abandon the operation and return to the current setting. This is the end of the Source 1 configure menu options. To return to the Source 1 menu press the W (Back) key. 3.5.2.2.3 2.2.3 – 2.2.5 Source 2/3/4 Configure To access further Source menus from the Source 1 menu (dependent on model ...
-
Ericsson RX8000 - page 71
Chapter 3 3. Use the S (Up) and T (Down) keys to toggle between the available types: ASI and IP Input (dependent on model and option licences obtained). 4. Press Save to save the new settings or Edit to abandon the operation and return to the current setting. 3.5.3.2 2.2 IP Input Card This menu allows the viewing and editing of the IP Input Card pa ...
-
Ericsson RX8000 - page 72
Chapter 3 STATUS |IP PACK ETS RECEIVED 2.2.1.4 |0000000000 3.5.3.2.1.5 2.2.1.5 Corrected Packet Count To view the corrected packet count, press the T (Down) key. The following screen is displayed: STATUS |CORRECTED PACKET COUNT 2.2.1.5 |0000000000 3.5.3.2.1.6 2.2.1.6 Lost Packet Count To view the lost packet count, press the T (Down) key. The follo ...
-
Ericsson RX8000 - page 73
Chapter 3 STATUS |FIFO OVERF LOW COUNT 2.2.1.10 |0000000010 3.5.3.2.1.11 2.2.1.11 MDI Delay Factor To view the MDI Delay Factor, press the T (Down) key. The following screen is displayed: STATUS |MDI DE LAY FACTOR 2.2.1.11 |00.000 3.5.3.2.1.12 2.2.1.12 MDI Media Loss Rate To view the MDI media loss rate, press the T (Down) key. The following screen ...
-
Ericsson RX8000 - page 74
Chapter 3 NETWORK 1 |IP ADDRESS 1 2.2.2 |000.000 .000.000 < To edit the Network 1 IP address: 1. Press the Edit key. The cursor appears below the first character of the address. 2. Edit the parameter value as required using the W (Back) and X (Forward) keys to select each digit in turn, and then using the S (Up) and T (Down) keys to increment or ...
-
Ericsson RX8000 - page 75
Chapter 3 3.5.3.2.2.3 2.2.2.3 MAC Address 1 To view the MAC Address 1, press the T (Down) key. The following screen is displayed: NETWORK 1 |MAC ADDRESS 1 2.2.2.3 |00:20 :AA:4f:06:1b 3.5.3.2.2.4 2.2.2.4 Ethernet Line Mode 1 To view and edit the Ethernet Line Mode 1, press the T (Down) key. The following screen is displayed: NETWORK 1 |ETHERNET LINE ...
-
Ericsson RX8000 - page 76
Chapter 3 3.5.3.2.2.8 2.2.2.8 ICMP Enable 1 To view and edit the ICMP 1, press the T (Down) key. The following screen is displayed: NETWORK 1 |ICMP ENABLE 1 2.2.2.8 |Enable To enable/disable the ICMP: 1. Press the Edit key. The cursor appears below the first character of the displayed option. 2. Use the S (Up) and T (Down) keys to toggle between th ...
-
Ericsson RX8000 - page 77
Chapter 3 2. Edit the parameter value as required using the W (Back) and X (Forward) keys to select each digit in turn, and then using the S (Up) and T (Down) keys to increment or decrement the digit. 3. Press Save to save the new settings or Edit to abandon the operation and return to the current setting. 3.5.3.2.2.11 2.2.2.11 ARP Enable 1 To view ...
-
Ericsson RX8000 - page 78
Chapter 3 This is the last of the Network 1 screens. To ret urn to the top level Network 1 screen press the W (Back) Key. 3.5.3.2.3 2.2.3 Network 2 From the Network 1 screen 2.2.2, press the T (Down) key. The following screen is displayed. NETWORK 2 |IP ADDRESS 2 2.2.3 |000.000 .000.000 > The Network address 2 may be edited and all of the Networ ...
-
Ericsson RX8000 - page 79
Chapter 3 3. Press Save to save the new settings or Edit to abandon the operation and return to the current setting. 3.5.3.2.4.2 2.2.4.2 SNMP Enable To view and edit the SNMP, press the T (Down) key. The following screen is displayed: SETUP |SNMP ENABLE 2.2.4.2 |Disable To enable/disable the SNMP: 1. Press the Edit key. The cursor appears below the ...
-
Ericsson RX8000 - page 80
Chapter 3 2. Edit the parameter value as required using the W (Back) and X (Forward) keys to select each digit in turn, and then using the S (Up) and T (Down) keys to increment or decrement the digit. 3. Press Save to save the new settings or Edit to abandon the operation and return to the current setting. 3.5.3.2.4.5 2.2.4.5 Network Util 2 (Max Va ...
-
Ericsson RX8000 - page 81
Chapter 3 2.2.4.7 |0 .004 To edit the MDI Media Loss Rate: 1. Press the Edit key. The cursor appears below the first character of the displayed option. 2. Edit the parameter value as required using the W (Back) and X (Forward) keys to select each digit in turn, and then using the S (Up) and T (Down) keys to increment or decrement the digit. 3. Pres ...
-
Ericsson RX8000 - page 82
Chapter 3 3. Press Save to save the new settings or Edit to abandon the operation and return to the current setting. This is the last of the I/P Port screens. To return to the top level I/P Port screen, press the W (Back) key. 3.5.3.2.6 2.2.6 Stream 1/ Unicast Enable 1 To view and edit the Unicast Enable 1, press the T (Down) key. The following scr ...
-
Ericsson RX8000 - page 83
Chapter 3 To edit the Source IP Address 1: 1. Press the Edit key. The cursor appears below the first character of the displayed value. 2. Edit the parameter value as required using the W (Back) and X (Forward) keys to select each digit in turn, and then using the S (Up) and T (Down) keys to increment or decrement the digit. 3. Press Save to save th ...
-
Ericsson RX8000 - page 84
Chapter 3 3.5.3.2.6.5 2.2.6.5 Row Port 1 To view and edit the Row Port 1, press the T (Down) key. The following screen is displayed: STREAM 1 |ROW PORT 1 2.2.6.4 |00000 To edit the Row Port 1 value: 1. Press the Edit key. The cursor appears below the first character of the displayed value. 2. Edit the parameter value as required using the W (Back) ...
-
Ericsson RX8000 - page 85
Chapter 3 3.5.3.2.8.2 2.2.8.2 Port 1/ 2 Link Down To view the alarms for ports 1 and 2, press the T (Down) key. The following screen is displayed: ALARMS |PORT 1 LIN K DOWN Alarm 2.2.8.2 |PORT 2 LINK DOWN Alarm 3.5.3.2.8.3 2.2.8.3 Port 1/ 2 IP Conflict To view the IP alarms for ports 1 and 2, press the T (Down) key. The following screen is displaye ...
-
Ericsson RX8000 - page 86
Chapter 3 This is the last of the Alarm screens. To return to the top level Alarm screen, press the W (Back) key. 3.5.3.2.9 2.2.9 Version To view the Unit Software Version, press the T (Down) key. The following screen is displayed: VERSION |SOFTWAR E VERSION 2.2.9 |0.13 > 3.5.3.2.9.1 2.2.9.1 Firmware SW Version To view the Firmware SW Version, p ...
-
Ericsson RX8000 - page 87
Chapter 3 To choose the Select input type: 1. Press the Edit key. The cursor appears below the displayed type (ASI shown above). 2. Use the S (Up) and T (Down) keys to toggle between the available types: ASI, 8VSB and AUTO (dependent on model type). 3. Press Save to save the new settings or Edit to abandon the operation and return to the current se ...
-
Ericsson RX8000 - page 88
Chapter 3 3. Press Save to save the new settings or Edit to abandon the operation and return to the current setting. To enable/disable the Auto Tune function: 1. Press the Edit key. The cursor appears below the current option. 2. Use the S (Up) and T (Down) keys to toggle between the Enabled/Disabled options until the required option is displayed. ...
-
Ericsson RX8000 - page 89
Chapter 3 2. Press the Edit key. The cursor appears below the displayed type (ASI shown above). 3. Use the S (Up) and T (Down) keys to toggle between the available types: ASI and G.703 (dependent on model and option licences obtained). 4. Press Save to save the new settings or Edit to abandon the operation and return to the current setting. 3.5.5.2 ...
-
Ericsson RX8000 - page 90
Chapter 3 3.5.5.2.1.4 2.2.1.4 ATM Alert Status To view the ATM Alert Status, press the T (Down) key. The following screen is displayed: STATUS |ATM AL ERT STATUS 2.2.1.4 | SYNC LOSS 3.5.5.2.1.5 2.2.1.5 PDH Rate/Framing To view the PDH Rate/Framing Status, press the T (Down) key. The following screen is displayed: STATUS |PDH RATE NONE 2.2.1.5 |FRAM ...
-
Ericsson RX8000 - page 91
Chapter 3 SETUP |MODE MPEG 2.2.2.1 | To choose the Mode: 1. Press the Edit key. The cursor appears below the displayed type (MPEG shown above). 2. Use the S (Up) and T (Down) keys to toggle between the available types: MPEG and ATM (dependent on model and option licences obtained). 3. Press Save to save the new settings or Edit to abandon the opera ...
-
Ericsson RX8000 - page 92
Chapter 3 3. Press Save to save the new settings or Edit to abandon the operation and return to the current setting. 4. Use the X (Forward) and W (Back) keys to toggle between the Reed-Solomon and Derandomizer inputs. 3.5.5.2.2.4 2.2.2.4 Man Packet Length Ctrl/Packet Length Size To access the Man Packet Length Ctrl/Packet Length Size Setup function ...
-
Ericsson RX8000 - page 93
Chapter 3 3. Press Save to save the new settings or Edit to abandon the operation and return to the current setting. 4. Use the X (Forward) and W (Back) keys to toggle between the ATM Delta and ATM Alpha inputs. To select the ATM Alpha value: 1. Press the Edit key. Press the X (Forward) key until cursor appears below the current value. 2. Use the S ...
-
Ericsson RX8000 - page 94
Chapter 3 SETUP |ATM HEADER ERR IGNORE FALSE 2.2.2.7 |ATM VPI 017 To select the ATM Header Err Ignore value: 1. Press the Edit key. The cursor appears below the displayed type (FALSE shown above). 2. Use the S (Up) and T (Down) keys to toggle between the available options: TRUE and FALSE (dependent on model and option licences obtained). 3. Press S ...
-
Ericsson RX8000 - page 95
Chapter 3 3.5.5.2.2.9 2.2.2.8 Sy nc Miss Limit To access the Sync Miss Limit Setup function, press the T (Down) key. The following screen is displayed: SETUP |SYNC MISS LIM IT 003 2.2.2.9 | To set the Sync Miss Limit value: 1. Press the Edit key. 2. Use the S (Up) and T (Down) keys until the required value is obtained. 3. Press Save to save the new ...
-
Ericsson RX8000 - page 96
Chapter 3 STATUS |SERVICE ID: 00002 3.1.1 |SERVICE NO PMT The second line of the display shows information about the decryption status of the service. To return to the previous menu, press the W (Back) key. 3.5.6.2 3.2 Video To access the Video menu, press the T (Down) key. The following screen is displayed: SERVICE |VIDEO 3.2 | > 3.5.6.2.1 3.2. ...
-
Ericsson RX8000 - page 97
Chapter 3 6. Press Save to save the new settings or Edit to abandon the operation and return to the current setting. To edit the user STD: 1. Press the Edit key. The cursor appears below the first character of the current STD selection. 2. Use the S (Up) and T (Down) keys to toggle between the MPEG-4 AVC and MPEG-2 options. 3. Press Save to save th ...
-
Ericsson RX8000 - page 98
Chapter 3 3. Press Save to save the new settings or Edit to abandon the operation and return to the current setting. This is the last of the Video service options, to return to the Video service menu, press the W (Back) key. 3.5.6.3 3.3 Audio To access the Audio Service menu, press the T (Down) key. The following screen is displayed: SERVICE |AUDIO ...
-
Ericsson RX8000 - page 99
Chapter 3 2. Edit the parameter value as required using the W (Back) and X (Forward) keys to select each digit in turn, and then using the S (Up) and T (Down) keys to increment or decrement the digit. 3. Press Save to save the new settings or Edit to abandon the operation and return to the current setting. To edit the user STD: 1. Press the Edit ke ...
-
Ericsson RX8000 - page 100
Chapter 3 options Decoder 1, STEREO to Decoder 6, STEREO are available. If disabled, available options are Decoder 1, STEREO and Decoder 2, STEREO. 3. Select the required option and press Save to save the new settings or Edit to abandon the operation and return to the current setting. 3.5.6.4.2 3.4.2 – 3.4.8 CH 3+4, 5+6, 7+8, 9+10, 11+12, 13+14 a ...
-
Ericsson RX8000 - page 101
Chapter 3 To return to the Service Table Menu and access further menus, press the W (Back) key twice. 3.5.7.1.1.2 4.1.1.2 - 4.1.1.24 Service ID Slots 2-24 If the unit is a multi-service descrambler (depending on the model and licenses enabled) there can be up to 24 menus similar to that shown in Para 3.5.7.3 . Each menu displays the Service ID and ...
-
Ericsson RX8000 - page 102
Chapter 3 DIR |UNIQUE HAR DWARE ID 4.2.3 |34390968634 3.5.7.2.4 4.2.4 Manuf ID To view the manufacturer, model and hardware identifier values, press the T (Down) key. The following screen is displayed: DIR |MANUF ID DE HW TYPE 82 4.2.4 |MODEL ID 1D 3.5.7.2.5 4.2.5 Dow nload Status To view the Download Status, press the T (Down) key. The following s ...
-
Ericsson RX8000 - page 103
Chapter 3 When the reset PIN is input, the local lockout PIN will be reset. To reset PIN: 1. Press the Edit key. The cursor appears below the first character of the current selection. 2. Use the Up, T (Down), X (Forward) and W (Back) keys to enter the required number. 3. Press Save to save the new settings or Edit to abandon the operation and retur ...
-
Ericsson RX8000 - page 104
Chapter 3 DIR |POWER-U P CARRIER 4.2.10 |NO ST ORED SERVICE The second line displays the service name of the stored service. 3.5.7.2.11 4.2.11 Emergency Home Carrier To view the current condition of this option, press the T (Down) key. The following screen is displayed: DIR |EMERGENCY HOME CARRIER 4.2.11 |NO ST ORED SERVICE The second line displays ...
-
Ericsson RX8000 - page 105
Chapter 3 Note: Selecting AUTO will output SD-SDI for SD material and HD-SDI for HD material. 3. Use the W (Back) and X (Forward) keys to toggle between OUTPUT ONE and TWO. 4. Press Save to save the new settings or Edit to abandon the operation and return to the current setting. 3.5.8.1.2 5.1.2 Output 3 To edit the output types for output 3 (depend ...
-
Ericsson RX8000 - page 106
Chapter 3 This is the last of the Output menu options. To return to the Output menu and access further menus, press the W (Back) key . 3.5.9 6 Presets The Preset menu allows the access and editing of 40 sets of equipment pre- configured settings. This enables you to quickly store and retrieve your front panel settings (input tuning parameters) so t ...
-
Ericsson RX8000 - page 107
Chapter 3 2. Edit the parameter value as required using the W (Back) and X (Forward) keys to select each digit in turn, and then using the S (Up) and T (Down) keys to increment or decrement the digit. 3. Press Save to save the new settings or Edit to abandon the operation and return to the current setting. To save a preset: 1. Press the Edit key. T ...
-
Ericsson RX8000 - page 108
Chapter 3 EN/LZT 790 0005 R1A 3-60 BLANK ...
-
Ericsson RX8000 - page 109
4 Remote Control Chapter 4 Contents 4.1 Introduction ........................................................................................... 4-3 4.1.1 Local Control Lockout ........................................................................... 4-3 4.2 RS232/485 RCP ........................................................................... ...
-
Ericsson RX8000 - page 110
Remote Control EN/LZT 790 0005 R1A 4-2 BLANK ...
-
Ericsson RX8000 - page 111
Remote Control 4.1 Introduction The RX8000 Series Receivers can be remotely controlled / monitored in a variety of ways: • RS232/485 Remote Control Protocol (RCP) • Director Over-Air Control (Not RX8320) • Web Browser • SNMP 4.1.1 Local Control Lockout Common for all control methods is that the equipment can still be co ntrolled locally fro ...
-
Ericsson RX8000 - page 112
Remote Control 4.3 Director Ericsson’s Director Over-Air Control (OAC) system is available either as a standard feature or as an option on all of the RX8000 Series Receivers, except for the RX8320. OAC is a subset of the Director facility and is a remote control protocol which is used to access the units usi ng Ericsson’s nCompass Control Syste ...
-
Ericsson RX8000 - page 113
Remote Control 4.4 W eb Browser The Web Browser interface is available as a standard feature on all of the RX 8000 Series Receivers. For more detailed information on Web Browser remote control, see Chapter 5, Web Browser Control . 4.4.1 Setting Up Web Browser Remote Control A personal computer (PC) running a Web Browser can be used to configure, co ...
-
Ericsson RX8000 - page 114
Remote Control Figure 4.1 T ypical Web Browser S tatus Page For more information on the Web Browser interface and a description of the available web pages, see Chapter 5, Web Browser Control . 4.5 SNMP Simple Network Management Protocol (SNMP) is available as a standard feature on all of the RX8000 Series Receivers. SNMP is a network protocol used ...
-
Ericsson RX8000 - page 115
Remote Control 3. Ensure the trap community, read-write community and read-only community are configured as public or private in the same way as the MIB browse or SNMP application being used. 4.5.2 Downloading the MIB SNMP exposes management data in the form of variables on the managed systems, which describe the system configuration. The SNMP Mana ...
-
Ericsson RX8000 - page 116
Remote Control EN/LZT 790 0005 R1A 4-8 BLANK ...
-
Ericsson RX8000 - page 117
5 W eb Browser Control Chapter 5 Contents 5.1 Introduction ........................................................................................... 5-3 5.1.1 Setting up Web Browser Control .......................................................... 5-3 5.1.2 Using the Web Browser Interface ......................................................... ...
-
Ericsson RX8000 - page 118
Chapter 5 EN/LZT 790 0005 R1A 5-2 List of Figures Figure 5.1 Web Page Overview............................................................................. 5-3 Figure 5.2 About dialog ......................................................................................... 5-4 Figure 5.3 Status Web Page ............................................. ...
-
Ericsson RX8000 - page 119
Chapter 5 5.1 Introduction This chapter describes the features and options provided by the Web Browser interface menus and web pages for controlling the RX 8000 Series Receivers remotely. The Web Browser interface is available as a standard feature on all of the RX 8000 Series Receivers. 5.1.1 Setting up Web Browser Control For information on how t ...
-
Ericsson RX8000 - page 120
Chapter 5 • Header – The header of the web page displays the Ericsson logo and the unit model number name. At the right-hand side of the header an About button which, when clicked, displays an information dialog about the unit, including the software version number. Click the OK button to close the dialog. Figure 5.2 About dialog • Function T ...
-
Ericsson RX8000 - page 121
Chapter 5 Table 5.1 Web Page Icons, Buttons and Symbols Item Description Navigation Click on this icon to navigate one step up (to the pare nt folder) in the folder structure. Click on this icon to navigate back to the previous view. This i con typically appears when you are editing a single record in a table or a sub-table. Click on this button to ...
-
Ericsson RX8000 - page 122
Chapter 5 5.2 W eb Pages 5.2.1 Status To use the receiver Web Browser Interface, the IP address assigned to t he receiver control port in the front panel system menu should be entered into the address field of the Web browser. Provided that the network is correctly configured, the following status page should be automatically loaded and displayed. ...
-
Ericsson RX8000 - page 123
Chapter 5 • Audio Status – The decode status of the current audio stream. • CA (Conditional Access) Status - The status of the encryption authorizations. • Output Feed – The status of the output. • Mode – Indicates whether unit configuration is active or redundant. A small window located at the bottom left of the Status Page will show ...
-
Ericsson RX8000 - page 124
Chapter 5 • Name – This field contains a name string that can be assigned by the user. The last saved name is displayed on power-up but may be replaced by the user. The default name is the receiver model name. • Product Name – The name and/or model of the product. • Current Time – The time taken from the input Transport Stream. • Upti ...
-
Ericsson RX8000 - page 125
Chapter 5 To view this page, select the Environment button from the Device Info Page. Figure 5.6 Device Info > Environment Web Page There are no fields on this page, which may be edited by the user. Selecting the Refresh button will ensure that the latest information is displa yed from the current values of the equipment. 5.2.2.3 Device Info > ...
-
Ericsson RX8000 - page 126
Chapter 5 Figure 5.8 Device Info > Modules Web Page There are no fields on this page which may be edited by the user. Selecting the Refresh button will ensure that the latest information is displa yed from the current values of the equipment. 5.2.2.5 Device Info > Trap Destination Table When an alarm occurs within the equipment, an SNMP Trap ...
-
Ericsson RX8000 - page 127
Chapter 5 4. Select the Back button to return to the Device Info > Trap Destination Table web page. 5. Select the Apply Changes button to confirm additions. Selecting the Refresh button will ensure that the latest inform ation is being displayed from the current values of the equipment. 5.2.3 Alarms The alarms Page provides access to the alarms ...
-
Ericsson RX8000 - page 128
Chapter 5 Figure 5.1 1 Alarms W eb Page The contents of this page are composed mainly of fields with drop-down menus which allow the setting or masking of various alarms and check boxes which can be used to activate relay mapping. Two of the alarm fields, namely C/N (Carrier-to- Noise) Margin and Over Temperature also have associated entry fields w ...
-
Ericsson RX8000 - page 129
Chapter 5 The Parameters section of this web page allows the user to enable fur ther licenses by entering the custom key provided (when a license is purchased) in the Custom Key field. Once the custom key has been entered, the unit will need to be rebooted for the key to become effective. The custom key is a 22 decimal digit number. License keys ar ...
-
Ericsson RX8000 - page 130
Chapter 5 5.2.5 CA This page allows viewing of the Conditional Access (CA) Service Status and activation of various Director controls. To view this page, select the CA tab from the top of the current web page. Figure 5.14 CA Web Page The Director section of this web page allows the user to view the current settings for the Director and to activate ...
-
Ericsson RX8000 - page 131
Chapter 5 Any changes which are made to the CA page functions may be confirmed by selecting the Apply Changes button. Selecting the Refresh button will ensure that the latest information is being displayed from the current values of the equipment. The CA Service Status button allows the user to view the Conditional Access Status Table. 5.2.5.1 CA S ...
-
Ericsson RX8000 - page 132
Chapter 5 • Input Source – allows a choice of Source Selection Mode from the drop-down menu. • Primary Input – allows selection of the primary input to the receiver. • Input Loss Switch Period – allows the user to define a period, in seconds, before the unit switches to the alternate input (either Input Source or Primary). • Return to ...
-
Ericsson RX8000 - page 133
Chapter 5 There are also four Configuration buttons which allow the viewing and setting of the tuning parameters for the four possible RF inputs. Any changes which are made to the Satellite Input page may be confirmed by selecting the Apply Changes button. Selecting the Refresh button will ensure that the latest information is being displayed from ...
-
Ericsson RX8000 - page 134
Chapter 5 • LNB 22 kHz – this check box allows the LNB 22 kHz signal to be activated. Any changes which are made to the Configuration page may be confirmed by selecting the Apply Changes button. Selecting the Refresh button will ensure that the latest information is being displayed from the current values of the equipment. 5.2.7 Input Main Page ...
-
Ericsson RX8000 - page 135
Chapter 5 • IP Input TS Null Pkt Threshold – allows the user to determine the IP Input null packet occupancy percentage before switch. This option is available for all inputs (G.703, S2, etc.) An IP Input button is provided on this page which gives access to a further web page. This is described in the following section. Any changes which are m ...
-
Ericsson RX8000 - page 136
Chapter 5 Figure 5.20 Input > IP Input Web Page The following user-editable fields are displayed on this web page: User-editable fields in the IP Interface Section: • IP Address 1/2 – allows the user to input the relevant IP address. • Subnet Mask 1/2 – allows the user to input the relevant Subnet Mask address. • Default Gateway 1/2 ? ...
-
Ericsson RX8000 - page 137
Chapter 5 • Mcast IP Address 1/2 – allows the user to set the Multicast IP Address for the primary stream on Port 1/2. • Source IP Address 1/2 – allows the user to set the Source IP Address for the primary stream on Port 1/2. • UDP Port 1/2 – allows the user to set the UDP Port Address for the primary stream on Port 1/2. • Column Port ...
-
Ericsson RX8000 - page 138
Chapter 5 Figure 5.22 Clear ARP Success Window Any changes which are made to the Input>IP Input page may be confirmed by selecting the Apply Changes button. Selecting the Refresh button will ensure that the latest information is being displayed from the current values of the equipment. 5.2.8 Input (8VSB Input Card RX8320/HWO/8VSB fitted) This pa ...
-
Ericsson RX8000 - page 139
Chapter 5 • Primary Input – allows selection of the primary input to the receiver. • Input Loss Switch Period – allows the user to define a period, in seconds, before the unit switches to the alternate input (either Input Source or Primary). • Return to Primary – checking this box specifies that when the Primary is locked the unit will ...
-
Ericsson RX8000 - page 140
Chapter 5 User-editable fields in the Input Section: • Input source – allows a choice of Source Selection from the drop-down menu. • Primary Input – allows selection of the primary input to the receiver. • Input Loss Switch Period – allows the user to define a period, in seconds, before the unit switches to the alternate input (either I ...
-
Ericsson RX8000 - page 141
Chapter 5 • Derandomizer – checking this box enables the Derandomizer function. User-editable fields in the Advanced Section: • MPEG – allows the selection of the input mode from a drop-down menu. • Sync Cnt to Lock – allows the user to input an a ppropriate value. • Sync Miss Limit – allows the user to input an appropriate value . ...
-
Ericsson RX8000 - page 142
Chapter 5 4. If the MSD license is selected, and service filter mode is set to ‘Multiservice’ in the Output tab, the services to be fitted can be added by ticking the filter checkbox. 5. If service filter mode is set to ‘Remap’ in the Output tab, service PIDs may be remapped by selecting ‘remap config’ under PID info. New PIDs for each ...
-
Ericsson RX8000 - page 143
Chapter 5 Figure 5.27 Decode We b Page The following user-editable fields are displayed on this page . User-editable fields in the Service section: • Service – allows the selection of the decode service is to be used from a drop- down menu • PCR - allows the selection of the PCR to be used from a drop-down menu. By default, this is the PCR of ...
-
Ericsson RX8000 - page 144
Chapter 5 • Decode Mode – allows the selection of the decode mode from a drop-down menu. User-editable fields in the Decoders 1-6 sections (number of audio decod ers is license and model dependent): • PID – allows the selection of an PID audio for decode from a drop-down menu. • Gain – allows the input of a value in dB. Any changes whic ...
-
Ericsson RX8000 - page 145
Chapter 5 • Service Hunt – In this mode, upon the loss of a service the unit will sele ct the first available service from the service list. • Service Drop – In this mode, if a service is lost its select ion data will be dropped such that the service will not be selected again upon reacquisition. • Major/Minor Tracking – In this mode, t ...
-
Ericsson RX8000 - page 146
Chapter 5 • Test Pattern Standard - allows the selection of the test patt ern standard from a drop-down menu. • Video Output Mode - allows the selection of the video output mode from a drop-down menu. Note: 4:2:2 video cannot be up-scaled or cross-converted on RX 8200. • VGA Output Format - allows the selection of the VGA output format from a ...
-
Ericsson RX8000 - page 147
Chapter 5 Figure 5.29 Decode > VBI-V ANC Web Page EN/LZT 790 0005 R1A 5-31 ...
-
Ericsson RX8000 - page 148
Chapter 5 The following user-editable fields are displayed on this page . User-editable fields in the VBI section: • VBI PID - allows selection of the VBI PID from the service list via a drop-down menu. • User PID – allows user to input VBI PID. User-editable fields in the VANC section: • PID - allows input of PID. • Enable VANC – allow ...
-
Ericsson RX8000 - page 149
Chapter 5 • VANC Station ID User Name - allows input of Station ID user name. User-editable fields from AFD/Bar section: • Enable AFD/Bar - allows enable/disable of AFD/Bar from a drop-down menu. Any changes which are made to the Decode > VBI VANC page may be confirmed by selecting the Apply Changes button. Selecting the Refresh button will ...
-
Ericsson RX8000 - page 150
Chapter 5 Figure 5.31 Decode > DVB-Subtitles Web Page The following fields, which may be edited by the user, are displayed on this page. User-editable fields in the DVB Subtitles section: • PID - allows selection of the type of PID from a drop-down menu. • Enable Subtitles – checking this box allows the enabling of subtitles. • Scale - a ...
-
Ericsson RX8000 - page 151
Chapter 5 Figure 5.32 Decode > T eletext W eb Page The following user-editable fields are displayed on this page . • Teletext PID – allows selection of the type of Teletext PID from a drop-down menu. • Teletext Insertion – allows enable/disable of Teletext Insertion from a drop- down menu. • PTS Synchronisation – checking this box en ...
-
Ericsson RX8000 - page 152
Chapter 5 Figure 5.33 Output Web Page The following user-editable fields are displayed on this page . User-editable fields in the Output section: • TS (Transport Stream) Feed – allows selection of the type of transport stream output from a drop-down menu. • Output One/Two/Three – allows selection of the type of output from a drop- down menu ...
-
Ericsson RX8000 - page 153
Chapter 5 • Custom Src IP - allows input of the Custom source IP. User-editable fields in the Common section: • Link Speed – allows the selection of the IP output card lin k configuration. • Spanning Tree – checking this box enables the spanning tree protocol. User-editable fields in the IP Output Status section: • Swap RIP (Routing Inf ...
-
Ericsson RX8000 - page 154
Chapter 5 5.2.14 SNMP This page gives access to the Simple Network Management Protocol (SNMP) parameters for the receiver. To view this page, select the SNMP Tab from the current web page. Figure 5.35 SNMP Web Page The following user-editable fields are displayed on this page : • Version - allows selection of the SNMP version from a drop-down men ...
-
Ericsson RX8000 - page 155
Chapter 5 5.2.15 Presets This page gives access to a list of 40 preset configurations. This feature may be used to store input (tuning) parameters in order that settings do not have to be re- entered when changes are made. To view this page, select the Presets tab from the top of the current web page. Figure 5.36 Preset Web Page The following user- ...
-
Ericsson RX8000 - page 156
Chapter 5 5.2.16 Save/Load This page gives access to a range of Configuration download and Upload facilit ies which are supported by the receiver. To view this page, select the Save/Load tab from the top of the current web page. EN/LZT 790 0005 R1A 5-40 ...
-
Ericsson RX8000 - page 157
Chapter 5 Figure 5.37 Save/Load Web Page Only a portion of the web page is shown in Figure 5.37 . The facilities available from this page are as follows: • Save Configuration to File – allows the user to save the current receiver configuration as an XML file. This may then be used as a back-up to preserve all the settings entered on all the web ...
-
Ericsson RX8000 - page 158
Chapter 5 EN/LZT 790 0005 R1A 5-42 • Save Splice Logs File - allows the user to save the current splice logs file. It is recommended that these are saved periodically, as they may be required in the event of a fault occurring on the unit. Left-click on the link to display the lo g in the web page (click the browser refresh button to return to the ...
-
Ericsson RX8000 - page 159
6 Options Chapter 6 Contents 6.1 Hardware and Software Options .......................................................... 6-3 6.1.1 DVB-S2 Input Card (RX8200/HWO/DVBS2) ........................................ 6-5 6.1.2 8-VSB Input Card (RX83XX/HWO/8VSB) ............................................ 6-5 6.1.3 Gigabyte 100/1000Base T Ethernet (RX8XXX ...
-
Ericsson RX8000 - page 160
Chapter 6 EN/LZT 790 0005 R1A 6-2 6.2.19 Dolby Digital Decode (RX8XXX/SWO/AC3) ....................................... 6-12 6.2.20 AAC Audio Decode (RX8XXX/SWO/AAC) ......................................... 6-12 6.2.21 DVB-S2 16APSK (RX8XXX/SWO/ DVBS2/16APSK) ......................... 6-13 6.2.22 Null Packet Detection Redundancy Switching (RX8XXX/S ...
-
Ericsson RX8000 - page 161
Chapter 6 6.1 Hardware and Software Options These options require extra hardware to be fitted to the unit, or, in the case of software, extra licenses to be purchased. See Table 6.1 for a list of availa ble options. Contact the Customer Services Helpdesk for details (see Preliminary Pages ). z = Option B = Supplied with Base Model T able 6.1 Hardwa ...
-
Ericsson RX8000 - page 162
Chapter 6 RX8200 RX8310 RX8315 RX8320 RX8330 Option Number Description z z z z RX8XXX/SWO/MP2/MP4/SD MPEG-2 /4 AVC SD 4:2:0 Decoding z z z z RX8XXX/SWO/MP2/MP4/SD/HD MPEG -2/4 AVC HD 4:2:0 Decoding z z z z z RX8XXX/SWO/SING/SERVFILT Single Service Filtering z z z z z RX8XXX/SWO/MULT/SERVFILT Multi-Service Filtering z z z z RX8XXX/SWO/IP/DATA High S ...
-
Ericsson RX8000 - page 163
Chapter 6 6.1.1 DVB-S2 Input Card (RX8200/HWO/DVBS2) This option is only available for the RX8200 Receiver and is fitted as standard to the base models of RX8310, 8315 and 8330. With accompanying software options, the DVB-S2 Input card supports DVB-S, QPSK demodulation and DVB-S2, QPSK and 8PSK demodul ation. RX8200/HWO/DVBS2 provides four L-band i ...
-
Ericsson RX8000 - page 164
Chapter 6 The MPEG-2 4:2:2 SD Decoding Card provides 4:2:2 video decoding facilities. 6.1.6 MPEG-4 AVC 4:2:2 Decoding Card (RX8200/BAS/2) This option is only available for the RX8200 DVB Receiver. RX8200/BAS/2 is equipped with MPEG-4 4:2:2 decoding functionality. This function is dormant and is enabled with additional software options. 6.1.7 IP Out ...
-
Ericsson RX8000 - page 165
Chapter 6 Figure 6.2 shows a more detailed picture of the MPEG-2 data transfer. TS-packets are mapped in a datagram, using User Data Protocol (UDP), Internet Protocol (IP) and Ethernet. Figure 6.2: Building the Ethernet Frame … Information 14H Information Information 20H 8H 188 188 TS packets (1 to7) UDP datagram IP datagram Ethernet frame 6.1.8 ...
-
Ericsson RX8000 - page 166
Chapter 6 6.1.12 Balanced Audio Output Ca rd (RX8200/HWO/BAL/AUD) This option is only available for the RX8200 Receiver. The Balanced Audio Output card provides two stereo pairs of balanced analog and digital outputs. If four stereo pairs are required, t wo cards should be ordered. 6.1.13 XLR Terminal Audio Break-Out Cable (RX8XXX/CABLE/XLR) This o ...
-
Ericsson RX8000 - page 167
Chapter 6 The DVB-S2 Low Symbol Rate software option enables a DVB-S2 symbol rate of 1-5 Msym/s. 6.2.4 MPEG-2 SD Decode (RX8XXX/SWO/MPEG2/SD) This option is available for the RX8200, 8310, 8315 and 8330 Receivers. This option enables MPEG-2 SD 4:2:0 decoding. 6.2.5 MPEG-2 HD Decode (R X8XXX/SWO/MPEG2/HD) This option is available for the RX8200, 831 ...
-
Ericsson RX8000 - page 168
Chapter 6 6.2.10 Single-Service Filtering (R X8XXX/SWO/SING/SERVFILT) This option is available for the RX8200, 8310, 8315, 8320 an d 8330 Receivers. This option filters a complete service from a Multiple Program Transport Stream (MPTS) source and generates an Single Program Transport Stream (SPTS). When the Output tab/Filter Group/Service Filter Mo ...
-
Ericsson RX8000 - page 169
Chapter 6 The output bit rate, which is selected by the user, may be constant (by inserting NULL packets) or variable (plus the increment due to the PSI SI insertion). 6.2.11 Multi-Service Filtering (R X8XXX/SWO/MULTI/SERVFILT) This option is available for the RX8200, 8310, 8315, 8320 an d 8330 Receivers. This option enables the filtering of servic ...
-
Ericsson RX8000 - page 170
Chapter 6 Note: This option is available to all other units by selecting RX8XXX/HWO/IP/OUT. Note this will also order an IP Output Card. 6.2.15 Director (RX8XXX/SWO/DIR5) This option is only available for the RX8200 Receiver. This option provides Director Conditional Access (CA), over-air control and over-air software downloads. This license provid ...
-
Ericsson RX8000 - page 171
Chapter 6 This option enables two x AAC-LC and HE-AAC decoding. 6.2.21 DVB-S2 16APSK (RX8XXX/SWO/DVBS2/ 16APSK) This option is available for the RX8310, 8315 and 8330 Receivers. This option adds DVB-S2 QPSK, 8PSK and 16APSK capability to the DVB-S2 Input Option Card. 6.2.22 Null Packet Detection Redundancy Switching (RX8XXX/SWO/DVBS2/NULL) This opt ...
-
Ericsson RX8000 - page 172
Chapter 6 6.2.27 MPEG-2 SD 4:2:2 Decoding (RX8200/SWO/MP2/SD/422) This option is only available for the RX8200 Receiver. This option enables MPEG-2 SD 4:2:2 Decoding and requires the installation of the MPEG-2 SD 4:2:2 hardware option card. 6.2.28 MPEG-2 HD 4:2:2 Decodi ng (RX8200/SWO/MP2/HD/422) This option is only available for the RX8200 Receive ...
-
Ericsson RX8000 - page 173
Chapter 6 This option enables the conversion of HD video from 720p to 1080i or from 1080i to 720p. 6.2.34 Framesync (RX8200/SWO/FSYNC) This option is only available for the RX8200 Receiver. This option enables the framesync input, which allows the u nit to synchronise the video/audio playout of the unit to an external clock so that all synchronized ...
-
Ericsson RX8000 - page 174
Chapter 6 EN/LZT 790 0005 R1A 6-16 BLANK ...
-
Ericsson RX8000 - page 175
7 Preventive Maintenance and Fault-Finding Chapter 7 Contents 7.1 Introduction ........................................................................................... 7-3 7.2 Preventive Maintenance ....................................................................... 7-3 7.2.1 Routing Inspection ............................................... ...
-
Ericsson RX8000 - page 176
Chapter 7 EN/LZT 790 0005 R1A 7-2 BLANK ...
-
Ericsson RX8000 - page 177
Chapter 7 7.1 Introduction This chapter provides the schedules and instructions, where applicable, for routine inspection, cleaning and maintenance of the equipment which should be performed by an operator. There are also some basic fault-finding procedures to follow in the event of a suspected unit failure 7.2 Preventive Maintenance 7.2.1 Routing ...
-
Ericsson RX8000 - page 178
Chapter 7 2. If liquid has been spilled , or objects have fallen into the product. 3. If the product has been exposed to rain or water. 4. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as an improper adjustment of other controls may result ...
-
Ericsson RX8000 - page 179
Chapter 7 7.3.3 Levels of Continuing Ericsson Service Support For stand-alone equipment, then Ericsson BASIC Essential Support is the value for money choice. BASIC provides you with year-by-year Service long after the warranty has expired. For systems support you can choose either Gold Business Critical Support or Silver Business Advantage . These ...
-
Ericsson RX8000 - page 180
Chapter 7 7.4.3 Preliminary Investigations Always investigate the failure symptoms fully, prior to taking remedial action. Fault diagnosis for the equipment operator is limited to the following tasks, since the operator should NOT remove the covers of the equipment: 1. Ensure all leads and connectors are in place and serviceable. 2. Ensure the unit ...
-
Ericsson RX8000 - page 181
Chapter 7 Warning! Before replacing the rear panel fuse, disconnect the unit from the supply. Failure to do this may expose hazardous voltages. Unplug the unit from the local supply socket. 1. Ensure that power is turned off and the power cable is disconnected from the AC power inlet. 2. Ease out the fuse carrier by placing a small, flat- bladed sc ...
-
Ericsson RX8000 - page 182
Chapter 7 7.4.6 Summary Status LED Unlit If the Summary Status LED is unlit, fault-find the problem as detailed in Table 7.2 . T able 7.2 Su mmary S tatus LED Unlit Fault-finding Step Action If Result of Action is Yes… If Result of Action is No… 1 Check Status LED . Is the unit still working? If the unit is clearly working normally then the Sta ...
-
Ericsson RX8000 - page 183
Chapter 7 T able 7.3 Fans Not Working/Overheating Step Action If Result of Action is Yes… If Result of Action is No… 1 Check Fan Rota tion . Inspect the fans located at the sides of the enclosure. Are the fans rotating? Check the temperature (select Chassis / Temperature Alarms on the Device Info web page ). Check that the unit has been install ...
-
Ericsson RX8000 - page 184
Chapter 7 EN/LZT 790 0005 R1A 7-10 7.5.2 Equipment Dispose of this equipment safely at the end of its life. Local codes and/or environmental restrictions may affect its disposal. Check with your local a uthority. ...
-
Ericsson RX8000 - page 185
A Glossary Annex A The following list covers most of the abbreviations, acronyms and terms as used in Ericsson Manuals, User and Reference Guides. All terms may not be included in this Reference Guide. μ m Micrometre (former name - micro n): a unit of length equal to one millionth (10-6) of a metre. 1000BaseT The term for the Electri cal Gigabit E ...
-
Ericsson RX8000 - page 186
Annex A AMOL I and II Automatic Measure of Line-ups I and II: Used by automated equipment to measure programme-view ing ratings. ARP Address Resolution Proto col. A protocol used to "resolve" IP addresses into underlying Ethernet MAC addresses. ASI Asynchronous Serial Interf ace. ASIC Application-Specific Integrated Circuit: A customized ...
-
Ericsson RX8000 - page 187
Annex A Bouquet A collection of services (TV, radio, and data, or any combination of the three) grouped and sold together, and identified i n the SI as a group. A single service may be in several bouq uets. B-Picture; B-Frame Bi-directionally Predictive Coded Pictu re/Frame: A picture that is coded using motion-comp ensated prediction from previous ...
-
Ericsson RX8000 - page 188
Annex A Chrominance The colour part of a TV picture signal, rel ating to the hue and saturation but not to the luminance (brightness) of the signal. In a composite-coded colou r system, the colour informatio n (chrominance, often referre d to as chroma) is modulat ed onto a high frequency carrier and added to the mono chrome-format video signal car ...
-
Ericsson RX8000 - page 189
Annex A DCE Data Communications Equipment: Typically a modem . It establishes, maintains an d terminates a session on a network but in itself is not the source (originator) or destination (end receiving unit) of signals (e.g. a computer, see DTE ). A DCE device may also convert signals to comply with the tran smission path (network) format. DCT Dis ...
-
Ericsson RX8000 - page 190
Annex A DSNG Digital Satellite News-Gathering. DSP Digital Signal Processor. DTE Data circuit Terminating Equipment: A communications device that originates (is the source) o r is the end receiving unit (destination) o f signals on a network. It is typically a terminal or com puter. DTH Direct-To-Home. The term used to describe uni nterrupted trans ...
-
Ericsson RX8000 - page 191
Annex A Encryption Encoding of a transmission to prevent acce ss without the appropriate decryption equipment and authori zation. EPG Electronic Programme Guide: On -screen prog ramme listing using thumbnail pictures and/or text. Ethernet The most widely used local area net work (LAN) defined by the IEEE as the 802.3 standard. Transmi ssion speeds ...
-
Ericsson RX8000 - page 192
Annex A GUI Grap hical User Interface: The use of pictures rather than just words to represent the input and output of a program. A program with a GUI runs under a windo wing system and has a screen interface capable of displaying grap hics in the form of icons, drop-down menus and a movable poin ter. The on-screen informat ion is usually controlle ...
-
Ericsson RX8000 - page 193
Annex A IP Internet Protocol: The IP part of TCP/IP. IP implements the network layer (layer 3) of the protocol, which contains a network add ress and is used to route a message to a different network or sub-net work. IP accepts packets from the layer 4 tr an sport protocol (TCP or UDP), adds its own header to it and delivers a datagram to the layer ...
-
Ericsson RX8000 - page 194
Annex A JPEG Joint Photographic Experts Gr oup: ISO/ITU standard for compressing still images. It has a hig h compression capability. Using discrete co sine transform, it provides use r specified compression ratios up to around 1 00:1 (there is a trade-off betwe en image quality and file size). kbps 1000 bits per second. Kbit 1024 bits, usually ref ...
-
Ericsson RX8000 - page 195
Annex A MEM Multiplex Element Manager: A GUI-based control system, part of the range of Ericsson AB compressi on sy stem control element produ cts. The evolution 5 000 MEM holds a model of the system hardware. Using this model, it controls the individual system ele ments to configure the output multiplexes from the incomin g elementary streams. The ...
-
Ericsson RX8000 - page 196
Annex A Multicast An IP mechanism that allows transmissi on of data to multiple receivers. A multica st can also have sev eral transmit sourc es simultaneously. In video applications , mu lticast is typically used to distribute a video signal from a central source to multiple destinations. MUSICAM Masking pattern adapted Universal Sub-band Integ ra ...
-
Ericsson RX8000 - page 197
Annex A OFDM Orthogonal Frequency Division Multipl ex: A modulation technique used for digital TV transmissi on in Europe, Japan and Australia; more spectrally efficient than FDM. In OFDM, data is di stributed over a large number of carriers spaced apart at pre cise frequencies. The carriers are arrange d with overlapping sideba nds in such a way t ...
-
Ericsson RX8000 - page 198
Annex A PES Packetised Elementary Stream: A sequential stream of data bytes that has been converted from origin al elementary streams of audio and video access units and transpo rted as packets. Each PES packet consists of a header and a payload of variable length and subject to a maximum of 64 kbytes. A time stamp is provided by the MPEG-2 systems ...
-
Ericsson RX8000 - page 199
Annex A P R P B Analogue Colour difference signal s. Refer to C R C B for an explanation. PROM Programmable Read-Only Memory: A device, whi ch may be written once with data for permanent st orage, and then re ad whenever required. Special types of PROM pe rmit the erasure of all data by Ultraviolet light (EPROM) or by applicat ion of an electronic ...
-
Ericsson RX8000 - page 200
Annex A ROM Read Only Memory: A non-volatile storage device for digital data. Data has been stored permanently in this devi ce. No further information may be stored (written) there and the data i t holds cannot be erased. Data may be read as often as required. RS Reed-Solomon coding: An error detection and correction, coding system. 16 bytes of Ree ...
-
Ericsson RX8000 - page 201
Annex A STB Set-Top Box: A box that sits on top of a television set and is the interface between the home television and the cable TV company. New technologies evolving for set-to p boxes are video-on-dem and, video games, educational service s, database searches, and home shopping. The cable equiv alent of the IRD. SFN Single Frequency Network: Th ...
-
Ericsson RX8000 - page 202
Annex A SNTP Simple Network Time Protocol is an Internet protocol used to synchronize the clocks of computers to some time reference. It is a simplified version of the protoc ol NTP protocol which i s too complicated for many systems. Spatial Redundancy Information repetition due to area s of si milar luminance and/or chrominance characteristics wi ...
-
Ericsson RX8000 - page 203
Annex A UART Universal Asynch ronous Receive r Transmitter: A device providing a serial interface for transmitting and recei ving data. UDP User Datagram Protocol. A protocol above the IP layer that provides port multiplexing in addition. In essence, you can transmit IP data packets to several receiving pro cesses in the same unit/device. Unicast P ...
-
Ericsson RX8000 - page 204
Annex A EN/LZT 790 0005 R1A A-20 Y (Luminance) Defines the brightness of a particular point on a TV line. The only signal required for black and white pi ctures. Y/C Broadcast video with separate colour, Y (luminance) a nd C (Chroma) (sometimes calle d S-Video). YUV Y: Luminance component (Brightness), U and V: Chrominance (Colour difference) ...
-
Ericsson RX8000 - page 205
B T echnical S pecification Annex B Contents B.1 Output ................................................................................................... B-3 B.1.1 Supported Video Resolutions ............................................................... B-3 B.1.2 Supported Video Bit Rates ........................................................ ...
-
Ericsson RX8000 - page 206
Annex B EN/LZT 790 0005 R1A B-2 B.8 Cable Types ....................................................................................... B-20 B.9 Compliance ........................................................................................ B-21 B.9.1 Safety ....................................................................................... ...
-
Ericsson RX8000 - page 207
Annex B B.1 Output B.1.1 Supported Video Resolutions The RX8000 Receiver supports MPEG-2 and MPEG-4 AVC, 4:2:0. T able B.1 Supported Video Resolutions Input Resolutions (H x V) Frame-Rates Output Format (H x V) Specification 1920 x 1080 1440 x 1080 1280 x 1080 960 x 1080 29.97 25 720 x 480 interlaced, 1920 x 1080 interlaced 720 x 576 interlaced, 19 ...
-
Ericsson RX8000 - page 208
Annex B B.1.3 Composite Video Output The equipment supports video decoding as per ITU-R BT.470 and ANSI/SMPTE 170M. Table B.3 625 Line Description Test Signal Limit Bar Level VITS17 700mV +/- 7mV Bar Tilt VITS17 <0.5% Sync Level VITS17 300mV +/- 3mV DC Offset VITS17 +/- 100mV Chrominance to Luminance Gain Inequality Colour Bars 100 +/- 5% Chromi ...
-
Ericsson RX8000 - page 209
Annex B Description Test Signal Limit DC Offset NTC-7 comp +/- 100mV Chrominance to Luminance Gain Inequality NTC-7 comp 100 +/- 5% Chrominance to Luminance Phase Inequality NTC-7 comp <20nS K factor K 2T NTC-7 comp <1% Pulse X bar K rating 100 +/ - 1% Frequency Response (MultiBurst) FCC Multi- burst 0.5 MHz 1.25 MHz 2 MHz 3 MHz 3.58 MHz 4.1 ...
-
Ericsson RX8000 - page 210
Annex B Parameter Value for Y, R, G, B Value for Pb, Pr Condition Notes ± 1 dB 20 MHz to 30 MHz +1 dB/-2.5 dB MHz ± 1 dB Group delay DC to 30 MHz < 50nS DC to 30 MHz < 50nS Noise DC to 30 MHz < - 50 dB DC to 30 MHz < - 50 dB 100% ramp Out-of-band noise 30 MHz to 100 MHz < -50 dB 15 MHz to 100 MHz < -50 dB Sweep Linearity < 5% ...
-
Ericsson RX8000 - page 211
Annex B B.1.5 HD SDI Digital Video HD SDI output supports: • Embedded Decoded Audios • Closed Captioning (EIA 708B) • VITC • VANC Table B.7 Digital Video Output Connectors Item Specification Safety status S EL V Connecto r type BNC, Female, 75 Ω Connector designation HD SD I 1 HD SDI 2 HD SDI 3 Output standard (USA) ANSI/SMPTE 292M SDI out ...
-
Ericsson RX8000 - page 212
Annex B B.2.2 MPEG Audio The RX8000 Receiver supports decoding of MPEG audio as follows: • Compression layers: MPEG-1 layers I and II • Sampling rate: 48 kHz • Maximum c ompressed data rate: 384 kbps (layer II) B.2.3 Dolby Digital AC-3 Audio The RX8000 Receiver is able to decode and output the primary stereo pair of a Dolby Digital AC-3 encod ...
-
Ericsson RX8000 - page 213
Annex B Table B.8 Analogue Audio Performance Specifications Parameter Specification Safety status SELV Output connector Male 9 pin D-sub Output format Balanced Bit rates 32 kbps to 384 kbps Sampling rates 48 KHz Nominal Output Level 0dBu +/- 0.1 dB in 20 k Ω Output impedance: <20k Ω Clipping Level 12 dBFS – 24 dBFS (step size 1dB) Frequenc ...
-
Ericsson RX8000 - page 214
Annex B B.3.3 Audio Routing The RX8000 Receiver supports the following routing of audio signals: • STEREO (Channel 1 left, Channel 2 right) • MIXED TO BOTH (Channel 1 and 2 on left and right) • LEFT TO BOTH (Channel 1 on left and right) • RIGHT TO BOTH (Channel 2 on left and right) When the input signal is STEREO, the Audio digital output f ...
-
Ericsson RX8000 - page 215
Annex B Mono kbps Stereo kbps 80 160 96 192 112 224 128 256 160 320 192 384 B.3.7 Digital Audio Outputs Digital audio outputs comply with E1A-422 1 and have a maximum data rate of 3.072 Mbps. Digital audio is output on two 9-way, D-type and four BNC connectors. Audio output is balanced 2 – 7 Volts. B.4 Input S p ecifications B.4.1 DVB-S2 Satellit ...
-
Ericsson RX8000 - page 216
Annex B Parameter Specification Tuning step 1 kHz Carrier frequency search range ± 1 to ± 5 MHz Receive spectrum sense Normal and inverted L-band Power Input power level per carrier -65 to –25 dBm Total L-band input power < -10 dBm Oscillator power at the L-band inp ut < -65 dBm, 950 < Fosc < 2150 MHz DVB-S Modulation (EN 300 421) M ...
-
Ericsson RX8000 - page 217
Annex B Parameter Specification Miscellaneous DVB-S Phase noise tolerance 3 SSB phase-noise power spectral density < -68 – 10*log(Rs/20) dBc/ Hz at δ F = 10 kHz offset Phase noise power spectral density of the form C – 20*Log( δ F) δ F = Frequency offset from carrier Rs = Symbol-rate (Msymbol/s) DVB-S2 Phase noise tolerance 4 -25 dBc/Hz a ...
-
Ericsson RX8000 - page 218
Annex B Table B.13 DVB-S2 Satellite Input – DVB-S2 Es/No Ratio LDPC FEC Rate DVB-S2 Theoretical 5 Es/No Ratio (dB) in perfect linear channel for correct MPEG-2 system operation 1/2 QPSK 1.00 3/5 QPSK 2.23 2/3 QPSK 3.10 3/4 QPSK 4.03 4/5 QPSK 4.68 5/6 QPSK 5.18 8/9 QPSK 6.20 9/10 QPSK 6.42 3/5 8PSK 5.50 2/3 8PSK 6.62 3/4 8PSK 7.91 5/6 8PSK 9.35 8/ ...
-
Ericsson RX8000 - page 219
Annex B Table B.14 LNB Power and Control Parameter Specification Voltage V (nominal) Receiver Polarisation 6 Voltage 13 18 Vertical/circular right Horizontal/circular left Current 350 mA maximum LNB control 22 ± 2 kHz tone Tone amplitude 0.65 ± 0.2 Vp-p B.4.2 8-VSB Terrestrial Receivers B.4.2.1 General Table B.15 8-VSB Receiver Input Specificatio ...
-
Ericsson RX8000 - page 220
Annex B B.4.3 DVB-ASI Input T able B.16: DVB-ASI Copper Input Specification Safety status SELV Connector type BNC, Female Input impedance 75 Ω Data rate range 0.350 - 160 Mbps Error decodin g None B.4.4 100/1000BaseT Dual NI C Input Receivers Table B.17 100/1000BaseT IP Dual NIC Input Specifications Input Specification Safety status SELV Connector ...
-
Ericsson RX8000 - page 221
Annex B Table B.18 Frame Sync Connector Item Specification Safety status SELV Connector type BNC, Female Connector designation Frame Sync Pin: Centre Analogue Black and Burst Input Shield Ground/Chassis B.5 Output S pecifications B.5.1 Video Outputs See: Table B.3 625 Line Table B.4 525 Line in B.1.3 Composite Video Output , Table B.5 HD Analogue O ...
-
Ericsson RX8000 - page 222
Annex B Item Specification Voltage Maximum Switching Power 24 W / 60 VA Minimum Switching Load 0.1 mA, 100 mV AC B.5.4 DVB-ASI Output Table B.20: DVB-ASI Copper Input Specification Safety status SELV Connector type BNC, Female Input impedance 75 Ω Data rate range 0.350 - 160 Mbps Error decodin g None B.5.5 1000BaseT IP Output Table B.21 1000BaseT ...
-
Ericsson RX8000 - page 223
Annex B B.6 Environment al B.6.1 Conditions Table B.22 Environmental Conditions Operational Specification Tempera ture 0 ° C to +50 ° C ambient air temperature with free air-flow Humidity 0% to 95% (non-condensing) Cooling requireme nts Convection cooling/free air-flow Handling movement Fixed (non-mobile) use onl y Storage/Transportation Tempera ...
-
Ericsson RX8000 - page 224
Annex B B.7 Power Supply – AC Mains Input This equipment is fitted with a wide-ranging power supply. It is suitable for supply voltages of 100-240 V AC -10% +6% at 50/60 Hz nominal. Table B.25 AC Power Supply Specification Item Specification Power distribution system Type TN ONLY (EN 60950-1 Annex V): Power distribution system which is directly e ...
-
Ericsson RX8000 - page 225
Annex B Table B.26 Suitable Signal Cable Types Signal Type Connector Cable Alarm Relay 9-way D-type Male Belden 8162 CM 2PR24 shielded E108998 (typical) ASI Out 1 and 2 BNC Canford Audio BBC 1/3 PSF (type 2 video cable) ASI/SD-SDI/HD-SDI Out 1, 2 and 3 BNC Canford Audio BBC 1/3 PSF (type 2 video cable) ASI In BNC Canford Audio BBC 1/3 PSF (type 2 v ...
-
Ericsson RX8000 - page 226
Annex B B.9.2 EMC 8 The equipment has been designed and tested to meet the following: EN 55022 and CISPR22 European International Emission Standard Limits and methods of measurement of radio frequency interference characteristics of information technology equipment - Class A. EN 61000-3-2 9 European Electromagnetic Compatibility (EMC), Part 3 Limit ...
-
Ericsson RX8000 - page 227
Annex B DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility 1999/5/EC of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity. (If fitted with telecom ...
-
Ericsson RX8000 - page 228
Annex B Defines country of origin. The packaging is reusable per GB 18455-2001. This symbol guarantees that packagi ng with this symbol is recyclable and will be accepted by cardboard recyclers. Recyclable per GB 18455-2001. B.9.8 Materials Declarations Ericsson’s products are designed and manufactured in keeping with good environmental practise. ...
-
Ericsson RX8000 - page 229
Annex B 50 It is assumed that while the product is in normal use, any batteries associated with real-time clocks or battery-backed RAM will be replaced at the regular in tervals. The EFUP relates only to the environmental impact of the product in normal use, it does not imply that the product will continue to be supported for 50 years. B.9.9 Equipm ...
-
Ericsson RX8000 - page 230
Annex B EN/LZT 790 0005 R1A B-26 • First/Last name • Password request (6 numbers/characters). If you do not include this information one will be created for you. • Phone • Location (Country) • Company • Work Area (select one of the below) - Executive Management - Marketing and Sales - Planning/Engineering - Procurement/Supply - Project ...
-
Ericsson RX8000 - page 231
C Language Abbreviations Annex C Contents C.1 ISO Languages .................................................................................... C-3 C.2 Non-ISO Languages ............................................................................ C-4 List of Tables Table C.1 ISO Language Codes ...................................................... ...
-
Ericsson RX8000 - page 232
Annex C EN/LZT 790 0005 R1A C-2 BLANK ...
-
Ericsson RX8000 - page 233
Annex C C.1 ISO Languages Languages are shown in alphabetical order. T able C.1 ISO Language Codes NO LANGUAGE ABBREVIATION 5 ARABIC ARA BASA BAS 14 BENGALI BEN 135 CHINESE CHI 19 CZECH CZE 21 DANISH DAN 82 DUTCH DUT 25 ENGLISH ENG 31 FINNISH FIN 34 FRENCH FRE 22 GERMAN GER 24 GREEK GRK 40 GUJARATI GUJ 52 HEBREW HEB 42 HINDI HIN 44 HUNGARIAN HUN 50 ...
-
Ericsson RX8000 - page 234
Annex C NO LANGUAGE ABBREVIATION 27 SPANISH SPA 112 SWEDISH SWE 117 THAI THA 123 TURKISH TUR 128 URDU URD 130 VIETNAMESE VIE C.2 Non-ISO Languages The following non-ISO 1 languages are supported. T able C.2 Non-ISO La nguage Codes LANGUAGE ABBREVIATION MAIN ONE AUX TWO INTERNATIONAL SOUND INT AUDIO 1 AAA AUDIO 2 AAB AUDIO 3 AAC AUDIO 4 AAD AUDIO 5 ...
-
Ericsson RX8000 - page 235
Annex C The non-ISO languages allow tagging of audio without reference to specific languages. The system can then transmit two languages (Main and Auxiliary) which could be any type of audio. Note: The non-ISO languages need to be user-defined in the Encoder for them to be available. For language codes not supported by the RX 8000 Receiver, the Rec ...
-
Ericsson RX8000 - page 236
Annex C EN/LZT 790 0005 R1A C-6 BLANK ...
Do you have a question concerning Ericsson RX8000?
Use the form below
If you did not solve your problem by using a manual Ericsson RX8000, ask a question using the form below. If a user had a similar problem with Ericsson RX8000 it is likely that he will want to share the way to solve it.