English dropdown-ico

Manual Casio PRG-40B-2VER

8 pages Not applicable
Download

Go to site of 8

Summary
  • Casio PRG-40B-2VER - page 1

    2271-1 Module No. 2271 GETTING ACQUAINTED Congratulations upon your selection of this CASIO watch. To get the most out of your purchase, be sure to carefully read this manual and keep it on hand for later reference when necessary. Applications The built-in sensors of this watch measure direction, altitude, barometric pressure, and temperature. Meas ...

  • Casio PRG-40B-2VER - page 2

    2271-2 DIGITAL COMPASS A built-in bearing sensor detects magnetic north and indicates one of 16 directions on the display. Direction readings are performed in the Digital Compass Mode. • You can calibrate the bearing sensor if you suspect the direction reading is incorrect. To enter and exit the Digital Compass Mode 1. While in the Timekeeping, B ...

  • Casio PRG-40B-2VER - page 3

    2271-3 ALTIMETER A built-in altimeter uses a pressure sensor to detect the current air pressure, which is then used to estimate the current altitude. The watch is pre- programmed with ISA (International Standard Atmosphere) preset values, which are used to convert air pressure readings to altitude values. If you preset a reference altitude, the wat ...

  • Casio PRG-40B-2VER - page 4

    2271-4 To set a reference altitude 1. In the Altimeter Mode, hold down A until the display clears. After four or five seconds, either OFF or the current reference altitude value (if set) will start to flash, which indicates the setting screen. • OFF indicates no reference altitude. 2. Press E to increase the current reference altitude value by 5 ...

  • Casio PRG-40B-2VER - page 5

    2271-5 Deleting an Altitude Measurement Record Use the Recall Mode to delete altitude measurement records. You can enter the Recall Mode by pressing D . Note • The procedure you should use to delete a record depends on if the record was produced by Auto measurement or Manual measurement. • Deleting Auto measurement records deletes the entire se ...

  • Casio PRG-40B-2VER - page 6

    2271-6 To turn the auto light switch on and off In the Timekeeping, Digital Compass, Barometer/Thermometer, or Altimeter Mode, hold down C for about one second to toggle the auto light switch on ( displayed) or off ( not displayed). • Pressing C while in the Timekeeping, Digital Compass, or Altimeter Mode initially switches to the Barometer/Therm ...

  • Casio PRG-40B-2VER - page 7

    2271-7 Low Battery Indicator This message indicates that battery power is too low to perform the measurement. It appears whenever battery power drops below a certain level, or when you try to perform a measurement under very cold conditions (below about – 10 ° C/14 ° F). If the cause of the low battery indicator is due to use under cold conditi ...

  • Casio PRG-40B-2VER - page 8

    2271-8 3. Place the watch on a level surface facing any direction you want, and press B to calibrate the first direction. • When the calibration procedure is complete, the message OK appears in the upper display area. This soon changes to -2- and the magnetic north pointer flashes at the 6 o ’ clock position to indicate that the watch is ready ...

Manufacturer Casio Category Sport Watch

Documents that we receive from a manufacturer of a Casio PRG-40B-2VER can be divided into several groups. They are, among others:
- Casio technical drawings
- PRG-40B-2VER manuals
- Casio product data sheets
- information booklets
- or energy labels Casio PRG-40B-2VER
All of them are important, but the most important information from the point of view of use of the device are in the user manual Casio PRG-40B-2VER.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Casio PRG-40B-2VER, service manual, brief instructions and user manuals Casio PRG-40B-2VER. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Casio PRG-40B-2VER.

Similar manuals

A complete manual for the device Casio PRG-40B-2VER, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Casio PRG-40B-2VER by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Casio PRG-40B-2VER.

A complete Casio manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Casio PRG-40B-2VER - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Casio PRG-40B-2VER, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Casio PRG-40B-2VER, that we can find in the current document
3. Tips how to use the basic functions of the device Casio PRG-40B-2VER - which should help us in our first steps of using Casio PRG-40B-2VER
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Casio PRG-40B-2VER
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Casio PRG-40B-2VER in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Casio PRG-40B-2VER?

Use the form below

If you did not solve your problem by using a manual Casio PRG-40B-2VER, ask a question using the form below. If a user had a similar problem with Casio PRG-40B-2VER it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)