Manual Husqvarna 2748 GLS

44 pages 2.65 mb
Download

Go to site of 44

Summary
  • Husqvarna 2748 GLS - page 1

    200 8-01 O 0 8 02 013 2748 GLS Operator's Manual Operator's Manual Ride Mo wer 960 43004600 03002 ...

  • Husqvarna 2748 GLS - page 2

    2 I. GENERAL OPERA TION • Read, understand, and follow all instructions on the machine and in the manual before starting. • Do not put hands or feet near rotating parts or under the machine. Keep clear of the discharge opening at all times. • Only allow responsible adults, who are familiar with the in structions, to operate the machine. • C ...

  • Husqvarna 2748 GLS - page 3

    3 • Be sure the area is clear of bystanders before operat- ing. Stop machine if anyone enters the area. • Never carry passengers. • Do not mow in reverse unless absolutely necessary . Always look down and behind before and while back- ing. • Never carry children, even with the blades shut off. They may fall off and be seriously injured or i ...

  • Husqvarna 2748 GLS - page 4

    4 SAFETY RULES ......................................................... 2-3 PRODUCT SPECIFICA TIONS ....................................... 4 CUSTOMER RESPONSIBILITIES ................................. 4 ASSEMBL Y ................................................................. 5-6 OPERA TION ...................................................... ...

  • Husqvarna 2748 GLS - page 5

    5 UNAS SEMBLED P ARTS (2) Keys Slope Sheet Key (1) Oil Drain Tube TOOLS REQUIRED FOR AS SEMBL Y A socket wrench set will make assembly easier . Stan dard wrench sizes are listed. (1) 3/4" wrench Pliers (1) 9/16" wrench Tire pressure gauge Utility knife When right or left hand is mentioned in this man ual, it means when you are in the oper ...

  • Husqvarna 2748 GLS - page 6

    6 AS SEMBL Y NOTE: Y ou may now roll or drive your tractor off the skid. Follow the ap propriate instruction below to remove the tractor from the skid. WARNING: Before start ing, read, un derstand and fol low all in structions in the Op eration section of this man ual. Be sure tractor is in a well-ventilated area. Be sure the area in front of tract ...

  • Husqvarna 2748 GLS - page 7

    7 OPERA TION These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their meaning. DANGER, KEEP HANDS AND FEET AWAY FREE WHEEL (Automatic Models only) KEEP AREA CLEAR SLOPE HAZARDS 15 15 (SEE SAFETY RULES SECTION) BATTERY REVERSE FORWARD FAST SLOW ENGINE ON ENGINE OFF FUEL CHOKE MOWER HEIGHT REVERS ...

  • Husqvarna 2748 GLS - page 8

    8 OPERA TION KNOW Y OUR TRACTOR READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERA TING YOUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and ad justments. Save this manual for future reference. Our tractors conform to the applicable safety standards of the American Nati ...

  • Husqvarna 2748 GLS - page 9

    9 OPERA TION The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye dam age. Always wear safety glass es or eye shields while operating your tractor or per forming any adjustments or repairs. W e rec ommend a wide vision safety mask over spectacles or stan dard safety glasses. FIG. 4 FIG. 6 T ...

  • Husqvarna 2748 GLS - page 10

    10 OPERA TION TO ADJUST MOWER CUT TING HEIGHT (See Fig. 8) The po sition of the at tachment lift le ver (A) de termines the cutting height. • Put attachment lift lever in desired cutting height slot. The cutting height range is ap proximately 1" to 4". The heights are measured from the ground to the blade tip with the engine not running ...

  • Husqvarna 2748 GLS - page 11

    11 OPERA TION FIG. 11 TOWING CARTS AND OTHER A T T ACH MENTS T ow only the attachments that are recommended by and comply with specifications of the manufacturer of your trac- tor . Use common sense when towing. T oo heavy of a load, while on a slope, is dangerous. Tires can lose traction with the ground and cause you to lose control of your tracto ...

  • Husqvarna 2748 GLS - page 12

    12 OPERA TION ADD GASOLINE • Fill fuel tank to bottom of filler neck. Do not overfill. Use fresh, clean, regular un leaded gasoline with a minimum of 87 octane. (Use of leaded gasoline will increase carbon and lead oxide deposits and reduce valve life). Do not mix oil with gasoline. Purchase fuel in quan tities that can be used within 30 days to ...

  • Husqvarna 2748 GLS - page 13

    13 FIG. 12 MOWING TIPS • Mower should be properly leveled for best mowing performance. See “TO LEVEL MOWER HOUSING” in the Service and Adjustments section of this manual. • The left hand side of mower should be used for trim- ming. • Drive so that clippings are discharged onto the area that has been cut. Have the cut area to the right of ...

  • Husqvarna 2748 GLS - page 14

    14 MAINTENANCE T R A C T 0 R Inspect Muffler/Spark Arrester Clean Air Filter Change Engine Oil (with oil filter) Replace Air Filter Paper Cartridge Replace Spark Plug Check Engine Oil Level Clean Engine Cooling Fins Clean Air Screen 1 - Change more often when operating under a heavy load or in high ambient temperatures. 2 - Service more often when ...

  • Husqvarna 2748 GLS - page 15

    15 MAINTENANCE FIG. 13 BA TTERY Y our tractor has a battery charging system which is suf ficient for normal use. However , periodic charging of the battery with an automotive charger will extend its life. • Keep battery and terminals clean. • Keep battery bolts tight. • Keep small vent holes open. • Recharge at 6-10 amperes for 1 hour . NOT ...

  • Husqvarna 2748 GLS - page 16

    16 MAINTENANCE V -BEL TS Check V -belts for deterioration and wear after 100 hours of operation and replace if necessary . The belts are not adjustable. Re place belts if they begin to slip from wear . TRANSAXLE COOLING The transmission fan and cooling fins should be kept clean to assure proper cooling. Do not attempt to clean fan or transmission w ...

  • Husqvarna 2748 GLS - page 17

    17 MAINTENANCE MUFFLER Inspect and replace corroded muffler and spark arrester (if equipped) as it could create a fire hazard and/or dam- age. SP ARK PLUGS Replace spark plugs at the beginning of each mowing season or after every 100 hours of operation, whichever occurs first. Spark plug type and gap setting are shown in “PRODUCT SPECIFICA TIONS? ...

  • Husqvarna 2748 GLS - page 18

    18 SERVICE AND ADJUSTMENTS FIG. 17 WARNING: TO A VOID SERIOUS INJURY , BEFORE PERFORMING ANY SER VICE OR AD JUST - MENTS: • Depress brake pedal fully and set parking brake. • Place attachment clutch in “DISENGAGED” position. • T urn ignition key to “STOP ” and remove key . • Make sure the blades and all moving parts have completely ...

  • Husqvarna 2748 GLS - page 19

    19 SERVICE AND ADJUSTMENTS • A TT ACH MOWER SIDE SUSPENSION ARMS (A) TO CHASSIS - Position hole in arm over pin (B) on outside of tractor chassis and secure with washer and retainer spring. • Repeat on opposite side of tractor . A B C D - Pivot bar towards you and insert other end of bar into hole in rear mower bracket (D). Move mower as needed ...

  • Husqvarna 2748 GLS - page 20

    20 SERVICE AND ADJUSTMENTS TO LEVEL MOWER Make sure tires are properly inflated to the PSI shown on tires. If tires are over or under inflated, it may affect the appearance of your lawn and lead you to think the mower is not adjusted properly . VISUAL SIDE- TO -SIDE ADJUSTMENT (See Fig. 25) • With all tires properly inflated and if your lawn appe ...

  • Husqvarna 2748 GLS - page 21

    21 SERVICE AND ADJUSTMENTS 02966 A A 02548 B B NOTE: Each full turn of the adjustment nut will change mower height about 1/8". • Recheck measurements, adjust if necessary until front tip of blade is 1/8" to 1/2" lower than the rear tip. • Hold adjustment nut in position with wrench and tighten jam nut securely against adjustment ...

  • Husqvarna 2748 GLS - page 22

    22 SERVICE AND ADJUSTMENTS TO REPL ACE MOTION DRIVE BEL T (See Fig. 30) P ark the tractor on level surface. En gage parking brake. For as sistance, there is a belt installation guide decal on bottom side of left footrest. BEL T REMOV AL - • Remove mower (See “TO RE MOVE MOWER” in this section of manual). NOTE: Observe entire motion drive belt ...

  • Husqvarna 2748 GLS - page 23

    23 SERVICE AND ADJUSTMENTS FIG. 32 WEAK OR DEAD BA TTERY FULL Y CHARGED BA TTERY REPL ACING BA TTERY (See Fig. 33) WARNING: Do not short battery ter minals by allowing a wrench or any other object to contact both terminals at the same time. Before connecting battery , remove metal bracelets, wristwatch bands, rings, etc. Positive terminal must be c ...

  • Husqvarna 2748 GLS - page 24

    24 STORAGE Immediately prepare your tractor for storage at the end of the season or if the tractor will not be used for 30 days or more. WARNING: Never store the trac tor with gasoline in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in any en closure. TRACTOR Remove mower from trac ...

  • Husqvarna 2748 GLS - page 25

    25 TROUBLESHOOTING POINTS Will not start 1. Out of fuel. 1. Fill fuel tank. 2. Engine not “CHOKED” properly . 2. See “TO ST ART ENGINE” in Operation section. 3. Engine flooded. 3. Wait several minutes before attempting to start. 4. Bad spark plug. 4. Replace spark plug. 5. Dirty air filter . 5. Clean/replace air filter . 6. Dirty fuel filte ...

  • Husqvarna 2748 GLS - page 26

    26 TROUBLESHOOTING POINTS Engine dies when 1. Reverse operation system 1. T urn ignition key to tractor is shifted (ROS) is not "ON" while ROS "ON" position. into reverse mower or other attachment See Operation section. is engaged. Engine continues to run 1. Faulty operator -safety presence control system. 1. Check wiring, switc ...

  • Husqvarna 2748 GLS - page 27

    27 NO TES M FUSE ST ARTER SOLENOID BA TTERY ELECTRIC CLUTCH CLUTCH/BRAKE (PED AL UP) REVERSE SWITCH (NO T IN REVERSE) SEA T SWITCH (NO T OCCUPIED) SHORTING CONNECT OR CHASSIS HARNESS IGNITION UNIT HOUR METER REGULA TOR CHASSIS HARNESS CONNECT OR (MA TING SIDE) D ASH HARNESS CONNECT OR (MA TING SIDE) LIGHT SWITCH HEADLIGHTS ST A TOR FUEL LINE FUEL S ...

  • Husqvarna 2748 GLS - page 28

    28 TRACTOR - MODEL NO . 2748GLS (96043004600), PRODUCT NO. 960 43 00-46 ELECTRICAL 8 1 99 100 91 2 27 90 28 55 26 43 41 24 27 25 30 33 22 79 21 101 40 71 34 With Service Minder Option 46 46 With 12V Outlet Option 59 103 16 42 T07S 94 92 29 93 ...

  • Husqvarna 2748 GLS - page 29

    29 TRACTOR - MODEL NO . 2748GLS (96043004600), PRODUCT NO. 960 43 00-46 ELECTRICAL KEY P ART NO . NO . DESCRIPTION 1 532 16 34-65 Battery 2 874 76 04-12 Bolt Hex Hd 1/4-20 unc x 3/4 8 532 18 64-91 Battery Box 16 532 17 61-38 Switch Interlock 21 532 18 37-59 Harness Socket Light 22 532 00 41-52 Bulb, Light #1156 24 532 40 02-53 Cable Battery 25 532 ...

  • Husqvarna 2748 GLS - page 30

    30 TRACTOR - MODEL NO . 2748GLS (96043004600), PRODUCT NO. 960 43 00-46 CHASSIS 14 214 130 130 37 194 194 181 181 182 68 68 189 176 176 176 175 178 165 228 228 183 194 236 235 152 150 202 203 204 210 208 18 15 25 207 211 209 212 180 217 68 68 213 213 52 218 34 130 130 5 161 36 36 199 162 177 196 221 162 176 176 205 206 58 189 189 chassis-tex_57-gt- ...

  • Husqvarna 2748 GLS - page 31

    31 TRACTOR - MODEL NO . 2748GLS (96043004600), PRODUCT NO. 960 43 00-46 CHASSIS KEY P ART NO . NO . DESCRIPTION 3 532 40 50-12 Logo Husq. 5 532 40 87-01 Dash 14 532 41 10-46 Hood 15 532 19 89-07 Lens LH 18 532 40 86-07 Grille 25 532 19 89-06 Lens RH 34 532 19 61-25 Plate Engine 36 817 06 05-12 Screw 5/16-18 x 3/4 37 532 40 18-25 Fender 52 873 68 05 ...

  • Husqvarna 2748 GLS - page 32

    32 TRACTOR - MODEL NO . 2748GLS (96043004600), PRODUCT NO. 960 43 00-46 DRIVE 56 171 216 143 197 196 125 226 125 125 80 125 51 52 170 175 279 176 178 174 22 23 166 276 153 233 drive-te x_K66_fender_1 64 161 184 42 221 225 125 211 166 17 159 15 35 167 160 188 29 186 189 49 187 50 51 52 51 190 185 159 70 74 220 74 2 2 73 73 33 205 1 116 33 230 230 18 ...

  • Husqvarna 2748 GLS - page 33

    33 TRACTOR - MODEL NO . 2748GLS (96043004600), PRODUCT NO. 960 43 00-46 DRIVE KEY P ART NO . NO . DESCRIPTION 1 532 41 41-45 T ransaxle, T uffT orq K66 2 532 00 70-70 Key 7 532 19 98-37 Hub Asm. Wheel 9 532 14 00-80 Bolt Hub Wheel 15 819 13 13-16 Washer 13/32 x 13/16 x 16 Ga. 17 532 40 10-72 Spring, Brake 22 532 19 73-29 Rod Shift 23 532 14 08-45 K ...

  • Husqvarna 2748 GLS - page 34

    34 TRACTOR - MODEL NO . 2748GLS (96043004600), PRODUCT NO. 960 43 00-46 STEERING ASSEMBL Y 6 5 13 13 53 8 9 9 8 8 7 7 62 4 35 16 19 63 63 57 60 59 58 28 13 22 64 70 68 69 67 67 66 15 15 14 14 21 51 26 1 45 61 2 6 steering-tex_4-husq ...

  • Husqvarna 2748 GLS - page 35

    35 KEY P ART NO . NO . DESCRIPTION 1 532 41 64-80 Wheel, Steering 2 532 19 59-68 Axle Asm., Front 4 532 40 30-89 Spindle Asm., LH 5 532 40 30-90 Spindle Asm., RH 6 532 12 49-31 Bearing, Race Thrust Harden 7 532 12 17-48 Washer 25/32 x 1-5/8 x 16 Ga. 8 812 00 00-29 Ring, Clip #T5304-75 9 532 12 12-32 Cap, Spindle 13 532 12 17-49 Washer 25/32 x 1-1/4 ...

  • Husqvarna 2748 GLS - page 36

    36 TRACTOR - MODEL NO . 2748GLS (96043004600), PRODUCT NO. 960 43 00-46 ENGINE 1 84 84 29 SP ARK ARRESTER KIT 84 45 18 15 37 28 37 22 21 20 62 71 70 79 69 87 2 engine-te x_bs-2cyl_2 81 82 12 11 41 42 90 85 9 91 31 ...

  • Husqvarna 2748 GLS - page 37

    37 KEY P ART NO . NO . DESCRIPTION NOTE: All component dimensions given in U.S. inches 1 inch = 25.4 mm For engine service and replacement parts, call the toll free number for your engine manufacturer listed below: Briggs & Stratton 1-800-233-3723 1 - - - - - - Engine B&S Model No. 44Q777- 1039-B1 2 532 14 97-23 Muffler 9 532 19 43-20 Keepe ...

  • Husqvarna 2748 GLS - page 38

    38 TRACTOR - MODEL NO . 2748GLS (96043004600), PRODUCT NO. 960 43 00-46 SEA T ASSEMBL Y 1 532 40 66-21 Seat 2 532 18 01-66 Bracket Pivot F ender 3 532 14 06-75 Strap, Asm F ender 6 873 80 06-00 Nut, Lock w/Ins. 3/8-16 unc 7 532 12 41-81 Spring, Seat Cprsn 8 532 17 18-77 Bolt 5/16-18 unc x 3/4 w/Sems 10 532 19 69-77 Pan, Seat 21 532 17 18-52 Bolt, S ...

  • Husqvarna 2748 GLS - page 39

    39 TRACTOR - MODEL NO . 2748GLS (96043004600), PRODUCT NO. 960 43 00-46 DECALS NOTE: All component dimensions given in U.S. inches 1 inch = 25.4 mm KEY P ART NO . NO . DESCRIPTION 6 2 1 3 11 4 10 5 9 8 7 wheel_art_1-vgt WHEELS AND TIRES KEY P ART NO . NO . DESCRIPTION KEY P ART NO . NO . DESCRIPTION 17 16 16 1 532 05 91-92 Cap, V alve, Tire 2 532 0 ...

  • Husqvarna 2748 GLS - page 40

    40 TRACTOR - MODEL NO . 2748GLS (96043004600), PRODUCT NO. 960 43 00-46 MOWER DECK 47 7 54 46 32 33 31 30 1 33 52 48 43 50 97 33 49 39 185 46 46 6 21 122 114 98 31 32 25 26 24 27 194 113 17 21 49 187 190 188 190 187 120 117 116 189 21 18 13 14 15 22 20 11 8 29 48_deck_te x_21 12 16 19 241 242 ...

  • Husqvarna 2748 GLS - page 41

    41 TRACTOR - MODEL NO . 2748GLS (96043004600), PRODUCT NO. 960 43 00-46 MOWER DECK KEY P ART NO . NO . DESCRIPTION KEY P ART NO . NO . DESCRIPTION NOTE: All component dimensions given in U.S. inches 1 inch = 25.4 mm 1 532 41 87-00 Deck Weldment Mower 6 532 19 72-48 Cover Mandrel LH 7 532 19 91-02 Cover Mandrel RH 8 532 17 43-65 Bolt 7/16 Asm. Blade ...

  • Husqvarna 2748 GLS - page 42

    42 TRACTOR - MODEL NO . 2748GLS (96043004600), PRODUCT NO. 960 43 00-46 MOWER LIFT 7 3 87 10 88 2 89 90 87 98 97 97 91 lift-tex_3 91 89 87 89 87 2 532 19 52-23 Shaft Asm., Lift 3 532 19 52-30 Lever Asm., Lift RH 7 532 41 15-55 Grip, Lever 10 532 19 63-14 Spring T orsion 87 532 19 42-09 Pin Cotter 7/16 Bow Tie Lock 88 532 19 53-04 Spring Lift Assist ...

  • Husqvarna 2748 GLS - page 43

    43 15 DEGREES MAX. FOLD ALONG DOTTED LINE THIS IS A 15 DEGREE SLOPE ONLY RIDE UP AND DOWN HILL, NOT ACROSS HILL SUGGESTED GUIDE FOR SIGHTING SLOPES FOR SAFE OPERATION WARNING: To avoid serious injury, operate your tractor up and down the face of slopes, never across the face. Do not mow slopes greater than 15 degrees. Make turns gradually to preven ...

  • Husqvarna 2748 GLS - page 44

    SECTION 1: LIMITED WARRANTY Husqvarna Forest & Garden Company (“Husqvarna”) warrants Husqvarna product to the original purchaser to be free from defects in material and workmanship from the date of purchase for the “Warranty P eriod” of the product as set forth below: Lifetime Warranty: All tiller tines against breakage, trimmer shafts, ...

Manufacturer Husqvarna Category Lawn Mower

Documents that we receive from a manufacturer of a Husqvarna 2748 GLS can be divided into several groups. They are, among others:
- Husqvarna technical drawings
- 2748 GLS manuals
- Husqvarna product data sheets
- information booklets
- or energy labels Husqvarna 2748 GLS
All of them are important, but the most important information from the point of view of use of the device are in the user manual Husqvarna 2748 GLS.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Husqvarna 2748 GLS, service manual, brief instructions and user manuals Husqvarna 2748 GLS. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Husqvarna 2748 GLS.

Similar manuals

A complete manual for the device Husqvarna 2748 GLS, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Husqvarna 2748 GLS by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Husqvarna 2748 GLS.

A complete Husqvarna manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Husqvarna 2748 GLS - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Husqvarna 2748 GLS, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Husqvarna 2748 GLS, that we can find in the current document
3. Tips how to use the basic functions of the device Husqvarna 2748 GLS - which should help us in our first steps of using Husqvarna 2748 GLS
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Husqvarna 2748 GLS
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Husqvarna 2748 GLS in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Husqvarna 2748 GLS?

Use the form below

If you did not solve your problem by using a manual Husqvarna 2748 GLS, ask a question using the form below. If a user had a similar problem with Husqvarna 2748 GLS it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)