-
Compaq 5030 - page 1
User’s Guide Compaq TFT5030 Flat Panel Monitor June 2001 Enhanced for accessibility ...
-
Compaq 5030 - page 2
© 2001 Compaq Computer Corporation. Compaq and Compaq logo Registered in U. S. Patent and Trademark Office. Microsoft, MS-DOS, Windows, Windows NT are trademarks of Microsoft Corporation in the United States and other countries. All other product names mentioned here in may be trademarks of their respective companies. Compaq shall not be liable fo ...
-
Compaq 5030 - page 3
Product Features The Compaq TFT5030 Flat Panel Monitor has an active matrix, thin-film transistor (TFT), liquid crystal display (LCD). The monitor features include: ■ 15-inch (38.1-cm) viewable area display ■ 1024 × 768 resolution, plus full-screen support for lower resolutions ■ Wide viewing angle to allow viewing from a sitting or standing ...
-
Compaq 5030 - page 4
Product Features ■ Compliance with the following regulated specifications: ❏ EPA ENERGY STAR ❏ European Union CE Directives ❏ Swedish MPR II 1990 ❏ Swedish TCO '99 Universal Driver Manager This monitor may require a graphics driver (and/or .INF file) that is compatible with your compute r’s graphics adapter. The CD- ROM included wi ...
-
Compaq 5030 - page 5
Product Features Information Files This monitor includes a CD-ROM with two information files to be installed onto your computer—an .INF file and an .ICM file. ■ The .INF file defines monitor resources and provides specifications used by most operating systems to install support software for certain hardware devices. The .INF file ensures monito ...
-
Compaq 5030 - page 6
Product Features Setting Up the Monitor To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices, then follow these steps: 1. Place the monitor in a convenient, well-ventilated location near your computer. 2. Connect the signal and power cables to the monitor 1 . 3. Connect the DC connec ...
-
Compaq 5030 - page 7
Product Features Connecting the Monitor Cables CAUTION: When connecting the monitor, be sure to use the AC adapter supplied with the monitor. Failure to use this AC adapter may result in damage to the monitor. WARNING: To reduce the risk of electric shock or damage to your equipment: ■ Do not disable the power co rd grounding plug. The grounding ...
-
Compaq 5030 - page 8
Product Features Note: For security purposes, this monitor has been fitted with a slot for use with a security cab le lock that can be purchased separately at most computer stores. Note: After you turn on the monitor, install the Compaq LCD Display Assistant utility included on the CD-ROM. Use the on- screen instructions to adjust the picture quali ...
-
Compaq 5030 - page 9
Product Features Connecting the Video Signal Cable To connect the VGA analog or DVI-D (Digital Visual Interface- Digital) cable to the corresponding connector on the back of the monitor, you must first remove the monitor base cover. Note: For the digital input to function, the VGA cable must be disconnected from the monitor. If both VGA and DVI-D c ...
-
Compaq 5030 - page 10
Product Features 4. Connect the video cable to the corresponding connector on the back panel of the monitor 1 by threading the cable through the neck on the monitor base to the connector, then connect the other end of the cable 2 to the appropriate video connector on the back panel of the computer. Connecting the Video Cable to the Monitor and Comp ...
-
Compaq 5030 - page 11
Product Features The DVI-D connector on this monitor uses digital video information to provide higher speed for higher display resolution. The results are more precise video displays without manually adjusting screen display quality. Signal Cables Included: ■ VGA (Analog) to VGA Connector (15 pin) ■ DVI-D Cable (Digital only) to DVI Digital Con ...
-
Compaq 5030 - page 12
Product Features 2. Remove the cover plate 1 from the monitor base by placing your fingers in the opening on the bottom of the base and pulling upward, then pulling out to remove the cover. 3. Remove the back panel 1 from the monitor by pushing the bottom tabs upward and pulling out to remove the back panel. 4. Disconnect and remove the signal and ...
-
Compaq 5030 - page 13
Product Features When the base is removed, f our threaded mounting holes are exposed on the monitor panel to be used for mounting purposes. These mounting holes are spaced 75 mm apart and are compliant with the Video Electronics Standards Association (VESA) standard for mounting flat panel displays. To mount the monitor on a swing arm or other moun ...
-
Compaq 5030 - page 14
Product Features Front Panel Controls No. Icon Control Function 1 Menu button 1. Launches 1 st and 2 nd level on-screen menus. 2. Exits menus and on-screen display. 2 - Minus button 1. Selects and adjusts the functions. 2. Activates Auto Adjusts when the OSD menu is inactive. 3 + Plus button Selects and adjust s the functions. 4 Power switch Turns ...
-
Compaq 5030 - page 15
Product Features On-Screen Display Settings The adjustments for screen settings are located in the on-screen display (OSD) and can be viewed in one of six available languages. The following menus show the functions at each level: Main Menu Menu Level 1 Menu Level 2 Menu Level 3 Brightness Adjustment scale Contrast Adjustment scale Auto Adjustment A ...
-
Compaq 5030 - page 16
Product Features Main Menu Menu Level 1 Menu Level 2 Menu Level 3 Color 9300 o K 6500 o K Custom Color Cancel Save and Return Color adjustment Language Deutsch English Espanol Francais Italiano Nederlands Cancel Save and Return Management Power Saver Power On Recall Mode Display Serial No. Sleep Timer Default Video Input Basic Menu Cancel Save and ...
-
Compaq 5030 - page 17
Product Features Main Menu Menu Level 1 Menu Level 2 Menu Level 3 OSD Control Horizontal Position Vertical Position OSD Timeout OSD Transparency Cancel Save and Return Adjustment Scale Adjustment Scale Adjustment Scale Adjustment Scale Factory Reset Yes/No Exit Compaq TFT5030 Flat Panel Monitor User’s Guide 15 ...
-
Compaq 5030 - page 18
Product Features How to Adjust Settings 1. Launching the on-screen display Menus: ❏ To display the Basic Menu on the monitor screen: Press the Menu button on the monitor front panel. ❏ To display the Advanced Menu: Press the Menu button on the monitor front panel to display the Basic Menu, use the Minus or Plus buttons to scroll to and highligh ...
-
Compaq 5030 - page 19
Product Features 2. To select an item from the Main Menu, scroll down and highlight an item by pressing the Minus (-) button 2 located on the monitor front panel. To reverse or back up, press the Plus (+) button 3 . 3. Highlight your choice and press the Menu button 1 again. 4. Adjust the second-level me nu displays using the same procedures as the ...
-
Compaq 5030 - page 20
Product Features ■ Check Video Cable—Indicates the video cable may not be plugged into the computer or the computer may not be turned on. Sleep Timer Mode The Sleep Timer mode is an energy-saving feature that enables you to set a time for the monitor to power on and off at the same time every day. This also extends the life of the backlight bul ...
-
Compaq 5030 - page 21
Product Features 8. Press the Minus or Plus buttons to adjust the minutes. 9. Press the Menu button to lock in the time chosen. 10. After setting the current time, the highlight automatically skips to Set Sleep Time "hours." Repeat steps 6 through 9 to set Sleep Time. 11. If you do not want to set Sleep Time, press the Menu button twice, ...
-
Compaq 5030 - page 22
Product Features Note: The Compaq LCD Display Assi stant utility is used to adjust the screen quality of your monitor. This utility provides on- screen instructions. To install this utility onto your computer, follow the instructions on the "Configuring Your Compaq LCD Monitor" card located in the Progr am License Agreement packet. Optimi ...
-
Compaq 5030 - page 23
Product Features Display Resolutions Preset Modes Resolutions 1. Industry Standard 640 × 350 at 31.5 kHz/70 Hz 2. Industry Standard 640 × 480 at 31.5 kHz/60 Hz 3. VESA 640 × 480 at 37.5 kHz/75 Hz 4. Industry Standard 720 × 400 at 31.5 kHz/70 Hz 5. VESA 800 × 600 at 37.9 kHz/60 Hz 6. VESA 800 × 600 at 46.9 kHz/75 Hz 7. Macintosh-compatible 832 ...
-
Compaq 5030 - page 24
Product Features Energy Saver Feature When the monitor is in its nor mal operating mode, the monitor utilizes less than 45 watts of power and the Power LED is green. The monitor also supports a reduced power state. The reduced power state will be entered into if the monitor detects the absence of either the horizontal sync signal and/or the vertica ...
-
Compaq 5030 - page 25
Product Features ■ Use only a power source and conn ection appropriate for this monitor, as indicated on the marking label/back plate and the AC adapter. ■ If an extension cord or power strip is used, make sure that the cord or strip is rated for the product and that the total ampere ratings of all products plugged into the extension cord or po ...
-
Compaq 5030 - page 26
Product Features Cleaning the Monitor To clean the monitor, follow these steps: 1. Turn off the monitor and the computer. 2. Dust the monitor by wiping the screen and the cabinet with a soft, clean cloth. If the screen requires additional cleaning, use a clean cloth dampened with isopropyl alcohol. CAUTION: Do not use benzene, thinner, ammonia, or ...
-
Compaq 5030 - page 27
Agency Regulatory Notices Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, use ...
-
Compaq 5030 - page 28
Agency Regulatory Notices Cables Connections to this device must be made with shielded cables with metallic RFI/EMI connector hoods to maintain compliance with FCC Rules and Regulations. Declaration of Conformity for Products Marked with FCC Logo, United States Only This device complies with Part 15 of the FCC Rules. Operation is subject to the fol ...
-
Compaq 5030 - page 29
Agency Regulatory Notices Avis Canadien Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. European Notice Products with the CE Marking comply with both the EMC Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community. C ...
-
Compaq 5030 - page 30
Agency Regulatory Notices EPA Energy Star Compliance Monitors that are marked with the Energy Star Logo meet the requirements of the EPA Energy Star program. As an Energy Star Partner, Compaq Computer Corporation has determined that this product meets the Energy Star guidelines for energy efficiency. Specific details on using the Energy Saving feat ...
-
Compaq 5030 - page 31
Agency Regulatory Notices Compaq TFT 5030 Flat Panel Monitor User’s Guide 29 ...
Do you have a question concerning Compaq 5030?
Use the form below
If you did not solve your problem by using a manual Compaq 5030, ask a question using the form below. If a user had a similar problem with Compaq 5030 it is likely that he will want to share the way to solve it.